summaryrefslogtreecommitdiff
path: root/include/net/inetpeer.h
AgeCommit message (Collapse)Author
2019-02-08net: ipv4: use a dedicated counter for icmp_v4 redirect packetsLorenzo Bianconi
According to the algorithm described in the comment block at the beginning of ip_rt_send_redirect, the host should try to send 'ip_rt_redirect_number' ICMP redirect packets with an exponential backoff and then stop sending them at all assuming that the destination ignores redirects. If the device has previously sent some ICMP error packets that are rate-limited (e.g TTL expired) and continues to receive traffic, the redirect packets will never be transmitted. This happens since peer->rate_tokens will be typically greater than 'ip_rt_redirect_number' and so it will never be reset even if the redirect silence timeout (ip_rt_redirect_silence) has elapsed without receiving any packet requiring redirects. Fix it by using a dedicated counter for the number of ICMP redirect packets that has been sent by the host I have not been able to identify a given commit that introduced the issue since ip_rt_send_redirect implements the same rate-limiting algorithm from commit 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17inetpeer: remove AVL implementation in favor of RB treeEric Dumazet
As discussed in Faro during Netfilter Workshop 2017, RB trees can be used with RCU, using a seqlock. Note that net/rxrpc/conn_service.c is already using this. This patch converts inetpeer from AVL tree to RB tree, since it allows to remove private AVL implementation in favor of shared RB code. $ size net/ipv4/inetpeer.before net/ipv4/inetpeer.after text data bss dec hex filename 3195 40 128 3363 d23 net/ipv4/inetpeer.before 1562 24 0 1586 632 net/ipv4/inetpeer.after The same technique can be used to speed up net/netfilter/nft_set_rbtree.c (removing rwlock contention in fast path) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert inet_peer.refcnt from atomic_t to refcount_tReshetova, Elena
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. This conversion requires overall +1 on the whole refcounting scheme. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16inet: tcp: fix inetpeer_set_addr_v4()Eric Dumazet
David Ahern added a vif field in the a4 part of inetpeer_addr struct. This broke IPv4 TCP fast open client side and more generally tcp metrics cache, because inetpeer_addr_cmp() is now comparing two u32 instead of one. inetpeer_set_addr_v4() needs to properly init vif field, otherwise the comparison result depends on uninitialized data. Fixes: 192132b9a034 ("net: Add support for VRFs to inetpeer cache") Reported-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add support for VRFs to inetpeer cacheDavid Ahern
inetpeer caches based on address only, so duplicate IP addresses within a namespace return the same cached entry. Enhance the ipv4 address key to contain both the IPv4 address and VRF device index. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Refactor inetpeer address structDavid Ahern
Move the inetpeer_addr_base union to inetpeer_addr and drop inetpeer_addr_base. Both the a6 and in6_addr overlays are not needed; drop the __be32 version and rename in6 to a6 for consistency with ipv4. Add a new u32 array to the union which removes the need for the typecast in the compare function and the use of a consistent arg for both ipv4 and ipv6 addresses which makes the compare function more readable. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add helper function to compare inetpeer addressesDavid Ahern
tcp_metrics and inetpeer both have functions to compare inetpeer addresses. Consolidate into 1 version. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add set,get helpers for inetpeer addressesDavid Ahern
Use inetpeer set,get helpers in tcp_metrics rather than peeking into the inetpeer_addr struct. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25inetpeer: remove dead codeDavid Ahern
Remove various inlined functions not referenced in the kernel. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31tcp: simplify inetpeer_addr_base useJiri Benc
In many places, the a6 field is typecasted to struct in6_addr. As the fields are in union anyway, just add in6_addr type to the union and get rid of the typecasting. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-08inet: remove dead inetpeer sequence codeWillem de Bruijn
inetpeer sequence numbers are no longer incremented, so no need to check and flush the tree. The function that increments the sequence number was already dead code and removed in in "ipv4: remove unused function" (068a6e18). Remove the code that checks for a change, too. Verifying that v4_seq and v6_seq are never incremented and thus that flush_check compares bp->flush_seq to 0 is trivial. The second part of the change removes flush_check completely even though bp->flush_seq is exactly !0 once, at initialization. This change is correct because the time this branch is true is when bp->root == peer_avl_empty_rcu, in which the branch and inetpeer_invalidate_tree are a NOOP. Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: include/net/inetpeer.h net/ipv6/output_core.c Changes in net were fixing bugs in code removed in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02net: fix inet_getid() and ipv6_select_ident() bugsEric Dumazet
I noticed we were sending wrong IPv4 ID in TCP flows when MTU discovery is disabled. Note how GSO/TSO packets do not have monotonically incrementing ID. 06:37:41.575531 IP (id 14227, proto: TCP (6), length: 4396) 06:37:41.575534 IP (id 14272, proto: TCP (6), length: 65212) 06:37:41.575544 IP (id 14312, proto: TCP (6), length: 57972) 06:37:41.575678 IP (id 14317, proto: TCP (6), length: 7292) 06:37:41.575683 IP (id 14361, proto: TCP (6), length: 63764) It appears I introduced this bug in linux-3.1. inet_getid() must return the old value of peer->ip_id_count, not the new one. Lets revert this part, and remove the prevention of a null identification field in IPv6 Fragment Extension Header, which is dubious and not even done properly. Fixes: 87c48fa3b463 ("ipv6: make fragment identifications less predictable") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02inetpeer: get rid of ip_id_countEric Dumazet
Ideally, we would need to generate IP ID using a per destination IP generator. linux kernels used inet_peer cache for this purpose, but this had a huge cost on servers disabling MTU discovery. 1) each inet_peer struct consumes 192 bytes 2) inetpeer cache uses a binary tree of inet_peer structs, with a nominal size of ~66000 elements under load. 3) lookups in this tree are hitting a lot of cache lines, as tree depth is about 20. 4) If server deals with many tcp flows, we have a high probability of not finding the inet_peer, allocating a fresh one, inserting it in the tree with same initial ip_id_count, (cf secure_ip_id()) 5) We garbage collect inet_peer aggressively. IP ID generation do not have to be 'perfect' Goal is trying to avoid duplicates in a short period of time, so that reassembly units have a chance to complete reassembly of fragments belonging to one message before receiving other fragments with a recycled ID. We simply use an array of generators, and a Jenkin hash using the dst IP as a key. ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it belongs (it is only used from this file) secure_ip_id() and secure_ipv6_id() no longer are needed. Rename ip_select_ident_more() to ip_select_ident_segs() to avoid unnecessary decrement/increment of the number of segments. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-28ipv4: remove unused functionStephen Hemminger
inetpeer_invalidate_family defined but never used Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21inet*.h: Remove extern from function prototypesJoe Perches
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10ipv4: Maintain redirect and PMTU info in struct rtable again.David S. Miller
Maintaining this in the inetpeer entries was not the right way to do this at all. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10tcp: Move timestamps from inetpeer to metrics cache.David S. Miller
With help from Lin Ming. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11inet: Avoid potential NULL peer dereference.David S. Miller
We handle NULL in rt{,6}_set_peer but then our caller will try to pass that NULL pointer into inet_putpeer() which isn't ready for it. Fix this by moving the NULL check one level up, and then remove the now unnecessary NULL check from inetpeer_ptr_set_peer(). Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11inet: Add family scope inetpeer flushes.David S. Miller
This implementation can deal with having many inetpeer roots, which is a necessary prerequisite for per-FIB table rooted peer tables. Each family (AF_INET, AF_INET6) has a sequence number which we bump when we get a family invalidation request. Each peer lookup cheaply checks whether the flush sequence of the root we are using is out of date, and if so flushes it and updates the sequence number. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11inet: Hide route peer accesses behind helpers.David S. Miller
We encode the pointer(s) into an unsigned long with one state bit. The state bit is used so we can store the inetpeer tree root to use when resolving the peer later. Later the peer roots will be per-FIB table, and this change works to facilitate that. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-09inet: Pass inetpeer root into inet_getpeer*() interfaces.David S. Miller
Otherwise we reference potentially non-existing members when ipv6 is disabled. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-09inet: Consolidate inetpeer_invalidate_tree() interfaces.David S. Miller
We only need one interface for this operation, since we always know which inetpeer root we want to flush. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-09inet: Initialize per-netns inetpeer roots in net/ipv{4,6}/route.cDavid S. Miller
Instead of net/ipv4/inetpeer.c Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-08inetpeer: add parameter net for inet_getpeer_v4,v6Gao feng
add struct net as a parameter of inet_getpeer_v[4,6], use net to replace &init_net. and modify some places to provide net for inet_getpeer_v[4,6] Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-08inetpeer: add namespace support for inetpeerGao feng
now inetpeer doesn't support namespace,the information will be leaking across namespace. this patch move the global vars v4_peers and v6_peers to netns_ipv4 and netns_ipv6 as a field peers. add struct pernet_operations inetpeer_ops to initial pernet inetpeer data. and change family_to_base and inet_getpeer to support namespace. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-06inetpeer: fix a race in inetpeer_gc_worker()Eric Dumazet
commit 5faa5df1fa2024 (inetpeer: Invalidate the inetpeer tree along with the routing cache) added a race : Before freeing an inetpeer, we must respect a RCU grace period, and make sure no user will attempt to increase refcnt. inetpeer_invalidate_tree() waits for a RCU grace period before inserting inetpeer tree into gc_list and waking the worker. At that time, no concurrent lookup can find a inetpeer in this tree. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08route: Remove redirect_genidSteffen Klassert
As we invalidate the inetpeer tree along with the routing cache now, we don't need a genid to reset the redirect handling when the routing cache is flushed. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08inetpeer: Invalidate the inetpeer tree along with the routing cacheSteffen Klassert
We initialize the routing metrics with the values cached on the inetpeer in rt_init_metrics(). So if we have the metrics cached on the inetpeer, we ignore the user configured fib_metrics. To fix this issue, we replace the old tree with a fresh initialized inet_peer_base. The old tree is removed later with a delayed work queue. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-11-26inet: add a redirect generation id in inetpeerEric Dumazet
Now inetpeer is the place where we cache redirect information for ipv4 destinations, we must be able to invalidate informations when a route is added/removed on host. As inetpeer is not yet namespace aware, this patch adds a shared redirect_genid, and a per inetpeer redirect_genid. This might be changed later if inetpeer becomes ns aware. Cache information for one inerpeer is valid as long as its redirect_genid has the same value than global redirect_genid. Reported-by: Arkadiusz Miśkiewicz <a.miskiewicz@gmail.com> Tested-by: Arkadiusz Miśkiewicz <a.miskiewicz@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22net: remove ipv6_addr_copy()Alexey Dobriyan
C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-21ipv6: make fragment identifications less predictableEric Dumazet
IPv6 fragment identification generation is way beyond what we use for IPv4 : It uses a single generator. Its not scalable and allows DOS attacks. Now inetpeer is IPv6 aware, we can use it to provide a more secure and scalable frag ident generator (per destination, instead of system wide) This patch : 1) defines a new secure_ipv6_id() helper 2) extends inet_getid() to provide 32bit results 3) extends ipv6_select_ident() with a new dest parameter Reported-by: Fernando Gont <fernando@gont.com.ar> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08inetpeer: lower false sharing effectEric Dumazet
Profiles show false sharing in addr_compare() because refcnt/dtime changes dirty the first inet_peer cache line, where are lying the keys used at lookup time. If many cpus are calling inet_getpeer() and inet_putpeer(), or need frag ids, addr_compare() is in 2nd position in "perf top". Before patch, my udpflood bench (16 threads) on my 2x4x2 machine : 5784.00 9.7% csum_partial_copy_generic [kernel] 3356.00 5.6% addr_compare [kernel] 2638.00 4.4% fib_table_lookup [kernel] 2625.00 4.4% ip_fragment [kernel] 1934.00 3.2% neigh_lookup [kernel] 1617.00 2.7% udp_sendmsg [kernel] 1608.00 2.7% __ip_route_output_key [kernel] 1480.00 2.5% __ip_append_data [kernel] 1396.00 2.3% kfree [kernel] 1195.00 2.0% kmem_cache_free [kernel] 1157.00 1.9% inet_getpeer [kernel] 1121.00 1.9% neigh_resolve_output [kernel] 1012.00 1.7% dev_queue_xmit [kernel] # time ./udpflood.sh real 0m44.511s user 0m20.020s sys 11m22.780s # time ./udpflood.sh real 0m44.099s user 0m20.140s sys 11m15.870s After patch, no more addr_compare() in profiles : 4171.00 10.7% csum_partial_copy_generic [kernel] 1787.00 4.6% fib_table_lookup [kernel] 1756.00 4.5% ip_fragment [kernel] 1234.00 3.2% udp_sendmsg [kernel] 1191.00 3.0% neigh_lookup [kernel] 1118.00 2.9% __ip_append_data [kernel] 1022.00 2.6% kfree [kernel] 993.00 2.5% __ip_route_output_key [kernel] 841.00 2.2% neigh_resolve_output [kernel] 816.00 2.1% kmem_cache_free [kernel] 658.00 1.7% ia32_sysenter_target [kernel] 632.00 1.6% kmem_cache_alloc_node [kernel] # time ./udpflood.sh real 0m41.587s user 0m19.190s sys 10m36.370s # time ./udpflood.sh real 0m41.486s user 0m19.290s sys 10m33.650s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08inetpeer: remove unused listEric Dumazet
Andi Kleen and Tim Chen reported huge contention on inetpeer unused_peers.lock, on memcached workload on a 40 core machine, with disabled route cache. It appears we constantly flip peers refcnt between 0 and 1 values, and we must insert/remove peers from unused_peers.list, holding a contended spinlock. Remove this list completely and perform a garbage collection on-the-fly, at lookup time, using the expired nodes we met during the tree traversal. This removes a lot of code, makes locking more standard, and obsoletes two sysctls (inet_peer_gc_mintime and inet_peer_gc_maxtime). This also removes two pointers in inet_peer structure. There is still a false sharing effect because refcnt is in first cache line of object [were the links and keys used by lookups are located], we might move it at the end of inet_peer structure to let this first cache line mostly read by cpus. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Andi Kleen <andi@firstfloor.org> CC: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22inet: constify ip headers and in6_addrEric Dumazet
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-10inetpeer: Add redirect and PMTU discovery cached info.David S. Miller
Validity of the cached PMTU information is indicated by it's expiration value being non-zero, just as per dst->expires. The scheme we will use is that we will remember the pre-ICMP value held in the metrics or route entry, and then at expiration time we will restore that value. In this way PMTU expiration does not kill off the cached route as is done currently. Redirect information is permanent, or at least until another redirect is received. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-10inetpeer: Abstract address representation further.David S. Miller
Future changes will add caching information, and some of these new elements will be addresses. Since the family is implicit via the ->daddr.family member, replicating the family in ever address we store is entirely redundant. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-04inetpeer: Move ICMP rate limiting state into inet_peer entries.David S. Miller
Like metrics, the ICMP rate limiting bits are cached state about a destination. So move it into the inet_peer entries. If an inet_peer cannot be bound (the reason is memory allocation failure or similar), the policy is to allow. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27inetpeer: Mark metrics as "new" in fresh inetpeer entries.David S. Miller
Set the RTAX_LOCKED metric to INETPEER_METRICS_NEW (basically, all ones) on fresh inetpeer entries. This way code can determine if default metrics have been loaded in from a routing table entry already. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27inetpeer: Add metrics storage to inetpeer entries.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-01inetpeer: Fix incorrect comment about inetpeer struct size.David S. Miller
Now with ipv6 support it is no longer less than 64 bytes. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-01inetpeer: Kill use of inet_peer_address_t typedef.David S. Miller
They are verboten these days. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-30inetpeer: Add inet_getpeer_v6()David S. Miller
Now that all of the infrastructure is in place, we can add the ipv6 shorthand for peer creation. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-30inetpeer: Make inet_getpeer() take an inet_peer_adress_t pointer.David S. Miller
And make an inet_getpeer_v4() helper, update callers. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-30inetpeer: Introduce inet_peer_address_t.David S. Miller
Currently only the v4 aspect is used, but this will change. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27inetpeer: __rcu annotationsEric Dumazet
Adds __rcu annotations to inetpeer (struct inet_peer)->avl_left (struct inet_peer)->avl_right This is a tedious cleanup, but removes one smp_wmb() from link_to_pool() since we now use more self documenting rcu_assign_pointer(). Note the use of RCU_INIT_POINTER() instead of rcu_assign_pointer() in all cases we dont need a memory barrier. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16inetpeer: restore small inet_peer structuresEric Dumazet
Addition of rcu_head to struct inet_peer added 16bytes on 64bit arches. Thats a bit unfortunate, since old size was exactly 64 bytes. This can be solved, using an union between this rcu_head an four fields, that are normally used only when a refcount is taken on inet_peer. rcu_head is used only when refcnt=-1, right before structure freeing. Add a inet_peer_refcheck() function to check this assertion for a while. We can bring back SLAB_HWCACHE_ALIGN qualifier in kmem cache creation. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>