| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2023-10-28
1) Remove unused function declarations of xfrm4_extract_input and
xfrm6_extract_input. From Yue Haibing.
2) Annotate struct xfrm_sec_ctx with __counted_by.
From Kees Cook.
3) Support GRO decapsulation for ESP in UDP encapsulation.
From Antony Antony et all.
4) Replace the xfrm session decode with flow dissector.
From Florian Westphal.
5) Fix a use after free in __xfrm6_udp_encap_rcv.
6) Fix the layer 4 flowi decoding.
From Florian Westphal.
* tag 'ipsec-next-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: policy: fix layer 4 flowi decoding
xfrm Fix use after free in __xfrm6_udp_encap_rcv.
xfrm: policy: replace session decode with flow dissector
xfrm: move mark and oif flowi decode into common code
xfrm: pass struct net to xfrm_decode_session wrappers
xfrm: Support GRO for IPv6 ESP in UDP encapsulation
xfrm: Support GRO for IPv4 ESP in UDP encapsulation
xfrm: Use the XFRM_GRO to indicate a GRO call on input
xfrm: Annotate struct xfrm_sec_ctx with __counted_by
xfrm: Remove unused function declarations
====================
Link: https://lore.kernel.org/r/20231028084328.3119236-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the bpf_fib_lookup() helper by making it to return the source
IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set.
For example, the following snippet can be used to derive the desired
source IP address:
struct bpf_fib_lookup p = { .ipv4_dst = ip4->daddr };
ret = bpf_skb_fib_lookup(skb, p, sizeof(p),
BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH);
if (ret != BPF_FIB_LKUP_RET_SUCCESS)
return TC_ACT_SHOT;
/* the p.ipv4_src now contains the source address */
The inability to derive the proper source address may cause malfunctions
in BPF-based dataplanes for hosts containing netdevs with more than one
routable IP address or for multi-homed hosts.
For example, Cilium implements packet masquerading in BPF. If an
egressing netdev to which the Cilium's BPF prog is attached has
multiple IP addresses, then only one [hardcoded] IP address can be used for
masquerading. This breaks connectivity if any other IP address should have
been selected instead, for example, when a public and private addresses
are attached to the same egress interface.
The change was tested with Cilium [1].
Nikolay Aleksandrov helped to figure out the IPv6 addr selection.
[1]: https://github.com/cilium/cilium/pull/28283
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Link: https://lore.kernel.org/r/20231007081415.33502-2-m@lambda.lt
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
This patch enables the GRO codepath for IPv6 ESP in UDP encapsulated
packets. Decapsulation happens at L2 and saves a full round through
the stack for each packet. This is also needed to support HW offload
for ESP in UDP encapsulation.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
|
|
This patch changes bpf_getsockopt(SOL_IPV6) to reuse
do_ipv6_getsockopt(). It removes the duplicated code from
bpf_getsockopt(SOL_IPV6).
This also makes bpf_getsockopt(SOL_IPV6) supporting the same
set of optnames as in bpf_setsockopt(SOL_IPV6). In particular,
this adds IPV6_AUTOFLOWLABEL support to bpf_getsockopt(SOL_IPV6).
ipv6 could be compiled as a module. Like how other code solved it
with stubs in ipv6_stubs.h, this patch adds the do_ipv6_getsockopt
to the ipv6_bpf_stub.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002931.2896218-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After the prep work in the previous patches,
this patch removes the dup code from bpf_setsockopt(SOL_IPV6)
and reuses the implementation in do_ipv6_setsockopt().
ipv6 could be compiled as a module. Like how other code solved it
with stubs in ipv6_stubs.h, this patch adds the do_ipv6_setsockopt
to the ipv6_bpf_stub.
The current bpf_setsockopt(IPV6_TCLASS) does not take the
INET_ECN_MASK into the account for tcp. The
do_ipv6_setsockopt(IPV6_TCLASS) will handle it correctly.
The existing optname white-list is refactored into a new
function sol_ipv6_setsockopt().
After this last SOL_IPV6 dup code removal, the __bpf_setsockopt()
is simplified enough that the extra "{ }" around the if statement
can be removed.
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061834.4181198-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We need a way to release a fib6_nh's per-cpu dsts when replacing
nexthops otherwise we can end up with stale per-cpu dsts which hold net
device references, so add a new IPv6 stub called fib6_nh_release_dsts.
It must be used after an RCU grace period, so no new dsts can be created
through a group's nexthop entry.
Similar to fib6_nh_release it shouldn't be used if fib6_nh_init has failed
so it doesn't need a dummy stub when IPv6 is not enabled.
Fixes: 7bf4796dd099 ("nexthops: add support for replace")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ipv6_dev_find to ipv6_stub to allow lookup of net_devices by IPV6
address in net/ipv4/icmp.c.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ipv6_fragment to ipv6_stub to avoid calling netfilter when
access ip6_fragment.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2020-05-29
1) Add IPv6 encapsulation support for ESP over UDP and TCP.
From Sabrina Dubroca.
2) Remove unneeded reference when initializing xfrm interfaces.
From Nicolas Dichtel.
3) Remove some indirect calls from the state_afinfo.
From Florian Westphal.
Please note that this pull request has two merge conflicts
between commit:
0c922a4850eb ("xfrm: Always set XFRM_TRANSFORMED in xfrm{4,6}_output_finish")
from Linus' tree and commit:
2ab6096db2f1 ("xfrm: remove output_finish indirection from xfrm_state_afinfo")
from the ipsec-next tree.
and between commit:
3986912f6a9a ("ipv6: move SIOCADDRT and SIOCDELRT handling into ->compat_ioctl")
from the net-next tree and commit:
0146dca70b87 ("xfrm: add support for UDPv6 encapsulation of ESP")
from the ipsec-next tree.
Both conflicts can be resolved as done in linux-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The intent is to add an additional bind parameter in the next commit.
Instead of adding another argument, let's convert all existing
flag arguments into an extendable bit field.
No functional changes.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200508174611.228805-4-sdf@google.com
|
|
We cannot call this function from the core kernel unless we would force
CONFIG_IPV6=y.
Therefore expose this via ipv6_stubs so we can call it from net/xfrm
in the followup patch.
Since the call is expected to be unlikely, no extra code for the IPV6=y
case is added and we will always eat the indirection cost.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Used in subsequent work to skip route delete
notifications on nexthop deletes.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This extends espintcp to support IPv6, building on the existing code
and the new UDPv6 encapsulation support. Most of the code is either
reused directly (stream parser, ULP) or very similar to the IPv4
variant (net/ipv6/esp6.c changes).
The separation of config options for IPv4 and IPv6 espintcp requires a
bit of Kconfig gymnastics to enable the core code.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This patch adds support for encapsulation of ESP over UDPv6. The code
is very similar to the IPv4 encapsulation implementation, and allows
to easily add espintcp on IPv6 as a follow-up.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
ipv6_stub uses the ip6_dst_lookup function to allow other modules to
perform IPv6 lookups. However, this function skips the XFRM layer
entirely.
All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the
ip_route_output_key and ip_route_output helpers) for their IPv4 lookups,
which calls xfrm_lookup_route(). This patch fixes this inconsistent
behavior by switching the stub to ip6_dst_lookup_flow, which also calls
xfrm_lookup_route().
This requires some changes in all the callers, as these two functions
take different arguments and have different return types.
Fixes: 5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add fib6_rt_update to send RTM_NEWROUTE with NLM_F_REPLACE set. This
helper will be used by the nexthop code to notify userspace of routes
that are impacted when a nexthop config is updated via replace.
This notification is needed for legacy apps that do not understand
the new nexthop object. Apps that are nexthop aware can use the
RTA_NH_ID attribute in the route notification to just ignore it.
In the future this should be wrapped in a sysctl to allow OS'es that
are fully updated to avoid the notificaton storm.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add hook to ipv6 stub to bump the sernum up to the root node for a
route. This is needed by the nexthop code when a nexthop config changes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ip6_del_rt to the IPv6 stub. The hook is needed by the nexthop
code to remove entries linked to a nexthop that is getting deleted.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change fib6_lookup and fib6_table_lookup to take a fib6_result and set
f6i and nh rather than returning a fib6_info. For now both always
return 0.
A later patch set can make these more like the IPv4 counterparts and
return EINVAL, EACCESS, etc based on fib6_type.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change ip6_mtu_from_fib6 and fib6_mtu to take a fib6_result over a
fib6_info. Update both to use the fib6_nh from fib6_result.
Since the signature of ip6_mtu_from_fib6 is already changing, add const
to daddr and saddr.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add 'struct fib6_result' to hold the fib entry and fib6_nh from a fib
lookup as separate entries, similar to what IPv4 now has with fib_result.
Rename fib6_multipath_select to fib6_select_path, pass fib6_result to
it, and set f6i and nh in the result once a path selection is done.
Call fib6_select_path unconditionally for path selection which means
moving the sibling and oif check to fib6_select_path. To handle the two
different call paths (2 only call multipath_select if flowi6_oif == 0 and
the other always calls it), add a new have_oif_match that controls the
sibling walk if relevant.
Update callers of fib6_multipath_select accordingly and have them use the
fib6_info and fib6_nh from the result.
This is needed for multipath nexthop objects where a single f6i can
point to multiple fib6_nh (similar to IPv4).
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add fib6_nh_init and fib6_nh_release to ipv6_stubs. If fib6_nh_init fails,
callers should not invoke fib6_nh_release, so there is no reason to have
a dummy stub for the IPv6 is not enabled case.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The number of stubs is growing and has nothing to do with addrconf.
Move the definition of the stubs to a separate header file and update
users. In the move, drop the vxlan specific comment before ipv6_stub.
Code move only; no functional change intended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
