summaryrefslogtreecommitdiff
path: root/include/scsi
AgeCommit message (Collapse)Author
2018-02-03Merge tag 'scsi-postmerge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull second set of SCSI updates from James Bottomley: "This is a set of three patches that depended on mq and zone changes in the block tree (now upstream)" * tag 'scsi-postmerge' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Remove zone write locking scsi: sd_zbc: Initialize device request queue zoned data scsi: scsi-mq-debugfs: Show more information
2018-01-31Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull RDMA subsystem updates from Jason Gunthorpe: "Overall this cycle did not have any major excitement, and did not require any shared branch with netdev. Lots of driver updates, particularly of the scale-up and performance variety. The largest body of core work was Parav's patches fixing and restructing some of the core code to make way for future RDMA containerization. Summary: - misc small driver fixups to bnxt_re/hfi1/qib/hns/ocrdma/rdmavt/vmw_pvrdma/nes - several major feature adds to bnxt_re driver: SRIOV VF RoCE support, HugePages support, extended hardware stats support, and SRQ support - a notable number of fixes to the i40iw driver from debugging scale up testing - more work to enable the new hip08 chip in the hns driver - misc small ULP fixups to srp/srpt//ipoib - preparation for srp initiator and target to support the RDMA-CM protocol for connections - add RDMA-CM support to srp initiator, srp target is still a WIP - fixes for a couple of places where ipoib could spam the dmesg log - fix encode/decode of FDR/EDR data rates in the core - many patches from Parav with ongoing work to clean up inconsistencies and bugs in RoCE support around the rdma_cm - mlx5 driver support for the userspace features 'thread domain', 'wallclock timestamps' and 'DV Direct Connected transport'. Support for the firmware dual port rocee capability - core support for more than 32 rdma devices in the char dev allocation - kernel doc updates from Randy Dunlap - new netlink uAPI for inspecting RDMA objects similar in spirit to 'ss' - one minor change to the kobject code acked by Greg KH" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (259 commits) RDMA/nldev: Provide detailed QP information RDMA/nldev: Provide global resource utilization RDMA/core: Add resource tracking for create and destroy PDs RDMA/core: Add resource tracking for create and destroy CQs RDMA/core: Add resource tracking for create and destroy QPs RDMA/restrack: Add general infrastructure to track RDMA resources RDMA/core: Save kernel caller name when creating PD and CQ objects RDMA/core: Use the MODNAME instead of the function name for pd callers RDMA: Move enum ib_cq_creation_flags to uapi headers IB/rxe: Change RDMA_RXE kconfig to use select IB/qib: remove qib_keys.c IB/mthca: remove mthca_user.h RDMA/cm: Fix access to uninitialized variable RDMA/cma: Use existing netif_is_bond_master function IB/core: Avoid SGID attributes query while converting GID from OPA to IB RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure IB/umad: Fix use of unprotected device pointer IB/iser: Combine substrings for three messages IB/iser: Delete an unnecessary variable initialisation in iser_send_data_out() IB/iser: Delete an error message for a failed memory allocation in iser_send_data_out() ...
2018-01-31Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual driver suspects: arcmsr, scsi_debug, mpt3sas, lpfc, cxlflash, qla2xxx, aacraid, megaraid_sas, hisi_sas. We also have a rework of the libsas hotplug handling to make it more robust, a slew of 32 bit time conversions and fixes, and a host of the usual minor updates and style changes. The biggest potential for regressions is the libsas hotplug changes, but so far they seem stable under testing" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (313 commits) scsi: qla2xxx: Fix logo flag for qlt_free_session_done() scsi: arcmsr: avoid do_gettimeofday scsi: core: Add VENDOR_SPECIFIC sense code definitions scsi: qedi: Drop cqe response during connection recovery scsi: fas216: fix sense buffer initialization scsi: ibmvfc: Remove unneeded semicolons scsi: hisi_sas: fix a bug in hisi_sas_dev_gone() scsi: hisi_sas: directly attached disk LED feature for v2 hw scsi: hisi_sas: devicetree: bindings: add LED feature for v2 hw scsi: megaraid_sas: NVMe passthrough command support scsi: megaraid: use ktime_get_real for firmware time scsi: fnic: use 64-bit timestamps scsi: qedf: Fix error return code in __qedf_probe() scsi: devinfo: fix format of the device list scsi: qla2xxx: Update driver version to 10.00.00.05-k scsi: qla2xxx: Add XCB counters to debugfs scsi: qla2xxx: Fix queue ID for async abort with Multiqueue scsi: qla2xxx: Fix warning for code intentation in __qla24xx_handle_gpdb_event() scsi: qla2xxx: Fix warning during port_name debug print scsi: qla2xxx: Fix warning in qla2x00_async_iocb_timeout() ...
2018-01-30Merge tag v4.15 of ↵Jason Gunthorpe
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git To resolve conflicts in: drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/mlx5/qp.c From patches merged into the -rc cycle. The conflict resolution matches what linux-next has been carrying. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-23IB/srp: Add RDMA/CM supportBart Van Assche
Since the SRP_LOGIN_REQ defined in the SRP standard is larger than what fits in the RDMA/CM login request private data, introduce a new login request format for the RDMA/CM. Note: since srp_daemon and ibsrpdm rely on the subnet manager and since there is no equivalent of the IB subnet manager in non-IB networks, login has to be performed manually for non-IB networks. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-22scsi: core: Add VENDOR_SPECIFIC sense code definitionsHannes Reinecke
Some older devices will return vendor specific sense codes, so we should be adding a definition for it. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-10scsi: libsas: direct call probe and destructJason Yan
In commit 87c8331fcf72 ("[SCSI] libsas: prevent domain rediscovery competing with ata error handling") introduced disco mutex to prevent rediscovery competing with ata error handling and put the whole revalidation in the mutex. But the rphy add/remove needs to wait for the error handling which also grabs the disco mutex. This may leads to dead lock.So the probe and destruct event were introduce to do the rphy add/remove asynchronously and out of the lock. The asynchronously processed workers makes the whole discovery process not atomic, the other events may interrupt the process. For example, if a loss of signal event inserted before the probe event, the sas_deform_port() is called and the port will be deleted. And sas_port_delete() may run before the destruct event, but the port-x:x is the top parent of end device or expander. This leads to a kernel WARNING such as: [ 82.042979] sysfs group 'power' not found for kobject 'phy-1:0:22' [ 82.042983] ------------[ cut here ]------------ [ 82.042986] WARNING: CPU: 54 PID: 1714 at fs/sysfs/group.c:237 sysfs_remove_group+0x94/0xa0 [ 82.043059] Call trace: [ 82.043082] [<ffff0000082e7624>] sysfs_remove_group+0x94/0xa0 [ 82.043085] [<ffff00000864e320>] dpm_sysfs_remove+0x60/0x70 [ 82.043086] [<ffff00000863ee10>] device_del+0x138/0x308 [ 82.043089] [<ffff00000869a2d0>] sas_phy_delete+0x38/0x60 [ 82.043091] [<ffff00000869a86c>] do_sas_phy_delete+0x6c/0x80 [ 82.043093] [<ffff00000863dc20>] device_for_each_child+0x58/0xa0 [ 82.043095] [<ffff000008696f80>] sas_remove_children+0x40/0x50 [ 82.043100] [<ffff00000869d1bc>] sas_destruct_devices+0x64/0xa0 [ 82.043102] [<ffff0000080e93bc>] process_one_work+0x1fc/0x4b0 [ 82.043104] [<ffff0000080e96c0>] worker_thread+0x50/0x490 [ 82.043105] [<ffff0000080f0364>] kthread+0xfc/0x128 [ 82.043107] [<ffff0000080836c0>] ret_from_fork+0x10/0x50 Make probe and destruct a direct call in the disco and revalidate function, but put them outside the lock. The whole discovery or revalidate won't be interrupted by other events. And the DISCE_PROBE and DISCE_DESTRUCT event are deleted as a result of the direct call. Introduce a new list to destruct the sas_port and put the port delete after the destruct. This makes sure the right order of destroying the sysfs kobject and fix the warning above. In sas_ex_revalidate_domain() have a loop to find all broadcasted device, and sometimes we have a chance to find the same expander twice. Because the sas_port will be deleted at the end of the whole revalidate process, sas_port with the same name cannot be added before this. Otherwise the sysfs will complain of creating duplicate filename. Since the LLDD will send broadcast for every device change, we can only process one expander's revalidation. [mkp: kbuild test robot warning] Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-08scsi: sd: Remove zone write lockingDamien Le Moal
The block layer now handles zone write locking. [mkp: removed SCMD_ZONE_WRITE_LOCK reference in scsi_debugfs] Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-08scsi: libsas: Use new workqueue to run sas event and disco eventJason Yan
Now all libsas works are queued to scsi host workqueue, include sas event work post by LLDD and sas discovery work, and a sas hotplug flow may be divided into several works, e.g libsas receive a PORTE_BYTES_DMAED event, currently we process it as following steps: sas_form_port --- run in work in shost workq sas_discover_domain --- run in another work in shost workq ... sas_probe_devices --- run in new work in shost workq We found during hot-add a device, libsas may need run several works in same workqueue to add device in system, the process is not atomic, it may interrupt by other sas event works, like PHYE_LOSS_OF_SIGNAL. This patch is preparation of execute libsas sas event in sync. We need to use different workqueue to run sas event and disco event. Otherwise the work will be blocked for waiting another chained work in the same workqueue. Signed-off-by: Yijing Wang <wangyijing@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-08scsi: libsas: make the event threshold configurableJason Yan
Add a sysfs attr that LLDD can configure it for every host. We made an example in hisi_sas. Other LLDDs using libsas can implement it if they want. Suggested-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> Acked-by: John Garry <john.garry@huawei.com> #for hisi_sas part Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-08scsi: libsas: shut down the PHY if events reached the thresholdJason Yan
If the PHY burst too many events, we will alloc a lot of events for the worker. This may leads to memory exhaustion. Dan Williams suggested to shut down the PHY if the events reached the threshold, because in this case the PHY may have gone into some erroneous state. Users can re-enable the PHY by sysfs if they want. We cannot use the fixed memory pool because if we run out of events, the shut down event and loss of signal event will lost too. The events still need to be allocated and processed in this case. Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-08scsi: libsas: Use dynamic alloced work to avoid sas event lostJason Yan
Now libsas hotplug work is static, every sas event type has its own static work, LLDD driver queues the hotplug work into shost->work_q. If LLDD driver burst posts lots hotplug events to libsas, the hotplug events may pending in the workqueue like shost->work_q new work[PORTE_BYTES_DMAED] --> |[PHYE_LOSS_OF_SIGNAL][PORTE_BYTES_DMAED] -> processing |<-------wait worker to process-------->| In this case, a new PORTE_BYTES_DMAED event coming, libsas try to queue it to shost->work_q, but this work is already pending, so it would be lost. Finally, libsas delete the related sas port and sas devices, but LLDD driver expect libsas add the sas port and devices(last sas event). This patch use dynamic allocated work to avoid this issue. Signed-off-by: Yijing Wang <wangyijing@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-03scsi: scsi_transport_fc: fix typos on 64/128 GBit define namesJames Smart
The define names specified 64Bit/128Bit, not 64GBIT/128GBIT. Correct the names. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-07scsi: core: Unexport scsi_initialize_rq()Bart Van Assche
Commit 651a01364994 ("scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough") removed the only call to scsi_initialize_rq() from outside the SCSI core. Hence unexport scsi_initialize_rq(). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-07scsi: core: Ensure that the SCSI error handler gets woken upBart Van Assche
If scsi_eh_scmd_add() is called concurrently with scsi_host_queue_ready() while shost->host_blocked > 0 then it can happen that neither function wakes up the SCSI error handler. Fix this by making every function that decreases the host_busy counter wake up the error handler if necessary and by protecting the host_failed checks with the SCSI host lock. Reported-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> References: https://marc.info/?l=linux-kernel&m=150461610630736 Fixes: commit 746650160866 ("scsi: convert host_busy to atomic_t") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Stuart Hayes <stuart.w.hayes@gmail.com> Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-21scsi: libsas: align sata_device's rps_resp on a cachelineHuacai Chen
The rps_resp buffer in ata_device is a DMA target, but it isn't explicitly cacheline aligned. Due to this, adjacent fields can be overwritten with stale data from memory on non-coherent architectures. As a result, the kernel is sometimes unable to communicate with an SATA device behind a SAS expander. Fix this by ensuring that the rps_resp buffer is cacheline aligned. This issue is similar to that fixed by Commit 84bda12af31f93 ("libata: align ap->sector_buf") and Commit 4ee34ea3a12396f35b26 ("libata: Align ata_device's id on a cacheline"). Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-16scsi: Use 'blist_flags_t' for scsi_devinfo flagsHannes Reinecke
As per recommendation from Linus we should be using a distinct type for blacklist flags. [mkp: was cut against an older kernel, applied by hand] Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor updates. There's no major behaviour change or additions to the core in all of this, so the potential for regressions should be small (biggest potential being in the scsi error handler changes)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: lpfc: Fix hard lock up NMI in els timeout handling. scsi: mpt3sas: remove a stray KERN_INFO scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event() scsi: aacraid: use timespec64 instead of timeval scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair() scsi: mpt3sas: fix dma_addr_t casts scsi: be2iscsi: Use kasprintf scsi: storvsc: Avoid excessive host scan on controller change scsi: lpfc: fix kzalloc-simple.cocci warnings scsi: mpt3sas: Update mpt3sas driver version. scsi: mpt3sas: Fix sparse warnings scsi: mpt3sas: Fix nvme drives checking for tlr. scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives. scsi: mpt3sas: scan and add nvme device after controller reset scsi: mpt3sas: Set NVMe device queue depth as 128 scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware. scsi: mpt3sas: API's to remove nvme drive from sml scsi: mpt3sas: API 's to support NVMe drive addition to SML ...
2017-11-14Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-10block, scsi: Make SCSI quiesce and resume work reliablyBart Van Assche
The contexts from which a SCSI device can be quiesced or resumed are: * Writing into /sys/class/scsi_device/*/device/state. * SCSI parallel (SPI) domain validation. * The SCSI device power management methods. See also scsi_bus_pm_ops. It is essential during suspend and resume that neither the filesystem state nor the filesystem metadata in RAM changes. This is why while the hibernation image is being written or restored that SCSI devices are quiesced. The SCSI core quiesces devices through scsi_device_quiesce() and scsi_device_resume(). In the SDEV_QUIESCE state execution of non-preempt requests is deferred. This is realized by returning BLKPREP_DEFER from inside scsi_prep_state_check() for quiesced SCSI devices. Avoid that a full queue prevents power management requests to be submitted by deferring allocation of non-preempt requests for devices in the quiesced state. This patch has been tested by running the following commands and by verifying that after each resume the fio job was still running: for ((i=0; i<10; i++)); do ( cd /sys/block/md0/md && while true; do [ "$(<sync_action)" = "idle" ] && echo check > sync_action sleep 1 done ) & pids=($!) for d in /sys/class/block/sd*[a-z]; do bdev=${d#/sys/class/block/} hcil=$(readlink "$d/device") hcil=${hcil#../../../} echo 4 > "$d/queue/nr_requests" echo 1 > "/sys/class/scsi_device/$hcil/device/queue_depth" fio --name="$bdev" --filename="/dev/$bdev" --buffered=0 --bs=512 \ --rw=randread --ioengine=libaio --numjobs=4 --iodepth=16 \ --iodepth_batch=1 --thread --loops=$((2**31)) & pids+=($!) done sleep 1 echo "$(date) Hibernating ..." >>hibernate-test-log.txt systemctl hibernate sleep 10 kill "${pids[@]}" echo idle > /sys/block/md0/md/sync_action wait echo "$(date) Done." >>hibernate-test-log.txt done Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> References: "I/O hangs after resuming from suspend-to-ram" (https://marc.info/?l=linux-block&m=150340235201348). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Martin Steigerwald <martin@lichtvoll.de> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-08scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitionsJames Smart
Add 64GBIT and 128GBIT port speed definitions. Upcoming hardware will reference these speeds. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01scsi: sas: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. This requires adding a pointer to hold the timer's target task, as there isn't a link back from slow_task. Cc: John Garry <john.garry@huawei.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Jack Wang <jinpu.wang@profitbricks.com> Cc: lindar_liu@usish.com Cc: Jens Axboe <axboe@fb.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Benjamin Block <bblock@linux.vnet.ibm.com> Cc: Baoyou Xie <baoyou.xie@linaro.org> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: John Garry <john.garry@huawei.com> # for hisi_sas part Tested-by: John Garry <john.garry@huawei.com> # basic sanity test for hisi_sas Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
2017-10-27scsi: fcoe: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: QLogic-Storage-Upstream@qlogic.com Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Johannes Thumshirn <jth@kernel.org> Cc: linux-scsi@vger.kernel.org Cc: fcoe-devel@open-fcoe.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Johannes Thumshirn <jth@kernel.org>
2017-10-18scsi: scsi_error: Handle power-on reset unit attentionHannes Reinecke
As per SAM there is a status precedence, with any sense code 29/XX taking second place just after an ACA ACTIVE status. Additionally, each target might prefer to not queue any unit attention conditions, but just report one. Due to the above, this will be that one with the highest precedence. This results in the sense code 29/XX effectively overwriting any other unit attention. Hence we should report the power-on reset to userland so that it can take appropriate action. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17scsi: scsi_devinfo: Reformat blacklist flagsHannes Reinecke
Reformat blacklist flags to make the values easier to read and to enhance error checking. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart van Assche <bart.vanassche@wdc.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-16scsi: sd_zbc: Move ZBC declarations to scsi_proto.hDamien Le Moal
Move standard macro definitions for the zone types and zone conditions to scsi_proto.h together with the definitions related to the REPORT ZONES command. While at it, define all values in the enums to be clear. Also remove unnecessary includes in sd_zbc.c. No functional change is introduced by this patch. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-02scsi: libiscsi: Remove iscsi_destroy_sessionKhazhismel Kumykov
iscsi_session_teardown was the only user of this function. Function currently is just short for iscsi_remove_session + iscsi_free_session. Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Acked-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-02scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAPMartin K. Petersen
SBC-4 states: "A MAXIMUM UNMAP LBA COUNT field set to a non-zero value indicates the maximum number of LBAs that may be unmapped by an UNMAP command" "A MAXIMUM WRITE SAME LENGTH field set to a non-zero value indicates the maximum number of contiguous logical blocks that the device server allows to be unmapped or written in a single WRITE SAME command." Despite the spec being clear on the topic, some devices incorrectly expect WRITE SAME commands with the UNMAP bit set to be limited to the value reported in MAXIMUM UNMAP LBA COUNT in the Block Limits VPD. Implement a blacklist option that can be used to accommodate devices with this behavior. Cc: <stable@vger.kernel.org> Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com> Reported-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-09-15scsi: libsas: remove unused port_gone_completion and DISCE_PORT_GONEJason Yan
No one uses the port_gone_completion in struct asd_sas_port and DISCE_PORT_GONE in enum disover_event, clean them out. Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-09-15scsi: libsas: remove the numbering for each event enumJason Yan
Numbering for each event enum makes no sense. Remove the numbering so that we don't have to calculate the number by hand every time. Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-09-15scsi: libsas: kill useless ha_event and do some cleanupJason Yan
The ha_event now has only one event HAE_RESET, and this event does nothing. Kill it and do some cleanup. This is a preparation for enhance libsas hotplug feature in the next patches. Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-09-13Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI fixes from James Bottomley: "A tiny update: one patch corrects a Kconfig problem with the shift of the SAS SMP code to BSG and the other removes a vestige of user space target mode" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_transport_sas: select BLK_DEV_BSGLIB scsi: Remove Scsi_Host.uspace_req_q
2017-09-07Merge branch 'fixes' into miscJames Bottomley
2017-09-05scsi: Remove Scsi_Host.uspace_req_qBart Van Assche
A patch I wrote myself several years ago removed SCSI target support from the code under drivers/scsi. That patch removed the code that sets uspace_req_q to a non-NULL value. Hence also remove the code that depends on uspace_req_q != NULL. References: commit 066465251303 ("tgt: removal") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-31scsi: Call scsi_initialize_rq() for filesystem requestsBart Van Assche
If a pass-through request is submitted then blk_get_request() initializes that request by calling scsi_initialize_rq(). Also call this function for filesystem requests. Introduce CMD_INITIALIZED to keep track of whether or not a request has already been initialized. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-29scsi: scsi_transport_sas: switch to bsg-lib for SMP passthroughChristoph Hellwig
Simplify the SMP passthrough code by switching it to the generic bsg-lib helpers that abstract away the details of the request code, and gets drivers out of seeing struct scsi_request. For the libsas host SMP code there is a small behavior difference in that we now always clear the residual len for successful commands, similar to the three other SMP handler implementations. Given that there is no partial command handling in the host SMP handler this should not matter in practice. [mkp: typos and checkpatch fixes] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-29scsi: Rework handling of scsi_device.vpd_pg8[03]Bart Van Assche
Introduce struct scsi_vpd for the VPD page length, data and the RCU head that will be used to free the VPD data. Use kfree_rcu() instead of kfree() to free VPD data. Move the VPD buffer pointer check inside the RCU read lock in the sysfs code. Only annotate pointers that are shared across threads with __rcu. Use rcu_dereference() when dereferencing an RCU pointer. This patch suppresses about twenty sparse complaints about the vpd_pg8[03] pointers. This patch also fixes a race condition, namely that updating of the VPD pointers and length variables in struct scsi_device was not atomic with reference to the code reading these variables. See also "Does the update code tolerate concurrent accesses?" in Documentation/RCU/checklist.txt. Fixes: commit 09e2b0b14690 ("scsi: rescan VPD attributes") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Shane Seymour <shane.seymour@hpe.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Shane Seymour <shane.seymour@hpe.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: libsas: move bus_reset_handler() to target_reset_handler()Hannes Reinecke
The bus reset handler is calling I_T Nexus reset, which logically is a target reset as it need to specify both the initiator and the target. So move it to target reset. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: scsi_transport_srp: Suppress a W=1 compiler warningBart Van Assche
Avoid that the following compiler warning is reported when building with W=1: drivers/scsi/scsi_transport_srp.c:92:19: warning: comparison is always false due to limited range of data type [-Wtype-limits] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: Use blk_mq_rq_to_pdu() to convert a request to a SCSI command pointerBart Van Assche
Since commit e9c787e65c0c ("scsi: allocate scsi_cmnd structures as part of struct request") struct request and struct scsi_cmnd are adjacent. This means that there is now an alternative to reading req->special to convert a pointer to a prepared request into a SCSI command pointer, namely by using blk_mq_rq_to_pdu(). Make this change where appropriate. Although this patch does not change any functionality, it slightly improves performance and slightly improves readability. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: Avoid sign extension of scsi_device.typeBart Van Assche
This patch avoids that smatch reports the following: drivers/scsi/scsi_sysfs.c:506 scsi_bus_uevent() warn: argument 3 to %02x specifier has type 'char' drivers/scsi/scsi_sysfs.c:872 sdev_show_modalias() warn: argument 4 to %02x specifier has type 'char' Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: Remove an obsolete function declarationBart Van Assche
Commit e9c787e65c0c ("scsi: allocate scsi_cmnd structures as part of struct request") removed the scsi_get_command() function. Hence also remove the declaration of that function. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-16scsi: sd_zbc: Write unlock zone from sd_uninit_cmnd()Damien Le Moal
Releasing a zone write lock only when the write commnand that acquired the lock completes can cause deadlocks due to potential command reordering if the lock owning request is requeued and not executed. This problem exists only with the scsi-mq path as, unlike the legacy path, requests are moved out of the dispatch queue before being prepared and so before locking a zone for a write command. Since sd_uninit_cmnd() is now always called when a request is requeued, call sd_zbc_write_unlock_zone() from that function for write requests that acquired a zone lock instead of from sd_done(). Acquisition of a zone lock by a write command is indicated using the new command flag SCMD_ZONE_WRITE_LOCK. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-07scsi: fc: start decoupling fc_block_scsi_eh from scsi_cmndSteffen Maier
Scsi_cmnd is an unsuitable argument for eh_device_reset_handler(), eh_target_reset_handler(), and eh_host_reset_handler() which do not have the scope of one single SCSI command. These callbacks tend to use fc_block_scsi_eh() requiring scsi_cmnd. In order to start decoupling above eh callbacks from scsi_cmnd, introduce a new variant of the function called fc_block_rport() taking an fc_rport as argument. Refactor the old fc_block_scsi_eh() to simply delegate to fc_block_rport(). Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "It's been usually busy for summer, with most of the efforts centered around TCMU developments and various target-core + fabric driver bug fixing activities. Not particularly large in terms of LoC, but lots of smaller patches from many different folks. The highlights include: - ibmvscsis logical partition manager support (Michael Cyr + Bryant Ly) - Convert target/iblock WRITE_SAME to blkdev_issue_zeroout (hch + nab) - Add support for TMR percpu LUN reference counting (nab) - Fix a potential deadlock between EXTENDED_COPY and iscsi shutdown (Bart) - Fix COMPARE_AND_WRITE caw_sem leak during se_cmd quiesce (Jiang Yi) - Fix TMCU module removal (Xiubo Li) - Fix iser-target OOPs during login failure (Andrea Righi + Sagi) - Breakup target-core free_device backend driver callback (mnc) - Perform TCMU add/delete/reconfig synchronously (mnc) - Fix TCMU multiple UIO open/close sequences (mnc) - Fix TCMU CHECK_CONDITION sense handling (mnc) - Fix target-core SAM_STAT_BUSY + TASK_SET_FULL handling (mnc + nab) - Introduce TYPE_ZBC support in PSCSI (Damien Le Moal) - Fix possible TCMU memory leak + OOPs when recalculating cmd base size (Xiubo Li + Bryant Ly + Damien Le Moal + mnc) - Add login_keys_workaround attribute for non RFC initiators (Robert LeBlanc + Arun Easi + nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (68 commits) iscsi-target: Add login_keys_workaround attribute for non RFC initiators Revert "qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT" tcmu: clean up the code and with one small fix tcmu: Fix possbile memory leak / OOPs when recalculating cmd base size target: export lio pgr/alua support as device attr target: Fix return sense reason in target_scsi3_emulate_pr_out target: Fix cmd size for PR-OUT in passthrough_parse_cdb tcmu: Fix dev_config_store target: pscsi: Introduce TYPE_ZBC support target: Use macro for WRITE_VERIFY_32 operation codes target: fix SAM_STAT_BUSY/TASK_SET_FULL handling target: remove transport_complete pscsi: finish cmd processing from pscsi_req_done tcmu: fix sense handling during completion target: add helper to copy sense to se_cmd buffer target: do not require a transport_complete for SCF_TRANSPORT_TASK_SENSE target: make device_mutex and device_list static tcmu: Fix flushing cmd entry dcache page tcmu: fix multiple uio open/close sequences tcmu: drop configured check in destroy ...
2017-07-06target: Use macro for WRITE_VERIFY_32 operation codesDamien Le Moal
Add WRITE_VERIFY_32 definition to scsi prototypes and use this macro definition isntead of the hard coded value. (Drop WRITE_VERIFY_16 that's already part of another patch - nab) Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-07-06Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, bnx2fc, qedf, hpsa, hisi_sas, smartpqi, cxlflash, aacraid, csiostor along with a host of minor and miscellaneous changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (276 commits) qla2xxx: Fix NVMe entry_type for iocb packet on BE system scsi: qla2xxx: avoid unused-function warning scsi: snic: fix a couple of spelling mistakes/typos scsi: qla2xxx: fix a bunch of typos and spelling mistakes scsi: lpfc: don't double count abort errors scsi: lpfc: spin_lock_irq() is not nestable scsi: hisi_sas: optimise DMA slot memory scsi: ibmvfc: constify dev_pm_ops structures. scsi: ibmvscsi: constify dev_pm_ops structures. scsi: cxlflash: Update debug prints in reset handlers scsi: cxlflash: Update send_tmf() parameters scsi: cxlflash: Avoid double free of character device scsi: Add STARGET_CREATED_REMOVE state to scsi_target_state scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails. scsi: ufs: flush eh_work when eh_work scheduled. scsi: qla2xxx: Protect access to qpair members with qpair->qp_lock scsi: sun_esp: fix device reference leaks scsi: fnic: changing queue command to return result DID_IMM_RETRY when rport is init scsi: fnic: correct speed display and add support for 25,40 and 100G scsi: fnic: added timestamp reporting in fnic debug stats ...
2017-07-06Merge branch 'for-4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - Christoph added support for TCG OPAL self encrypting disks - Minwoo added support for ATA PASS-THROUGH(32) - Linus Walleij removed spurious drvdata assignments in some drivers - Support for a few new device and other fixes * 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (33 commits) sd: add support for TCG OPAL self encrypting disks libata: fix build warning from unused goto label libata: Support for an ATA PASS-THROUGH(32) command. ahci: Add Device ID for ASMedia 1061R and 1062R sata_via: Enable optional hotplug on VT6420 ata: ahci_brcm: Avoid writing to read-only registers libata: Add the AHCI_HFLAG_NO_WRITE_TO_RO flag libata: Add the AHCI_HFLAG_YES_ALPM flag ata: ftide010: fix resource printing libata: make the function name in comment match the actual function ata: sata_rcar: make of_device_ids const. ata: pata_octeon_cf: make of_device_ids const. libata: Convert bare printks to pr_cont libahci: wrong comments in ahci_do_softreset() ata: declare ata_port_info structures as const ata: Add driver for Faraday Technology FTIDE010 ata: Add DT bindings for the Gemini SATA bridge ata: Add DT bindings for Faraday Technology FTIDE010 libata: implement SECURITY PROTOCOL IN/OUT libata: factor out a ata_identify_page_supported helper ...