| Age | Commit message (Collapse) | Author |
|---|
|
Use the generic dynamic interrupt moderation (dim) framework to
implement adaptive interrupt coalescing on Rx. With the per-packet
interrupt scheme, a high interrupt rate has been noted for moderate
traffic flows leading to high CPU utilization.
The dpio driver exports new functions to enable/disable adaptive IRQ
coalescing on a DPIO object, to query the state or to update Net DIM
with a new set of bytes and frames dequeued.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In DPAA2 based SoCs, the IRQ coalesing support per software portal has 2
configurable parameters:
- the IRQ timeout period (QBMAN_CINH_SWP_ITPR): how many 256 QBMAN
cycles need to pass until a dequeue interrupt is asserted.
- the IRQ threshold (QBMAN_CINH_SWP_DQRR_ITR): how many dequeue
responses in the DQRR ring would generate an IRQ.
Add support for setting up and querying these IRQ coalescing related
parameters.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Through the dpio_get_attributes() firmware call the dpio driver has
access to the QBMAN clock frequency. Extend the structure which holds
the firmware's response so that we can have access to this information.
This will be needed in the next patches which also add support for
interrupt coalescing which needs to be configured based on the
frequency.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 6ac9b61786cc64ae5cbfb69413137656f72e8204.
This commit was required because at that time, ioread/iowrite
functions were sub-optimal on powerpc/32 compared to the
architecture specific in_/out_ IO accessors.
But there are now equivalent since
commit 894fa235eb4c ("powerpc: inline iomap accessors").
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
The bd_mem_part member of ucc_geth_info always has the value
MEM_PART_SYSTEM, and AFAICT, there has never been any code setting it
to any other value. Moreover, muram is a somewhat precious resource,
so there's no point using that when normal memory serves just as well.
Apart from removing a lot of dead code, this is also motivated by
wanting to clean up the "store result from kmalloc() in a u32" mess.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a helper that takes a virtual address rather than the muram
offset. This will be used in a couple of places to avoid having to
store both the offset and the virtual address, as well as removing
NULL checks from the callers.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow passing const-qualified pointers without requiring a cast in the
caller.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dpaa_eth_napi_schedule() and caam_qi_napi_schedule() schedule NAPI if
invoked from:
- Hard interrupt context
- Any context which is not serving soft interrupts
Any context which is not serving soft interrupts includes hard interrupts
so the in_irq() check is redundant. caam_qi_napi_schedule() has a comment
about this:
/*
* In case of threaded ISR, for RT kernels in_irq() does not return
* appropriate value, so use in_serving_softirq to distinguish between
* softirq and irq contexts.
*/
if (in_irq() || !in_serving_softirq())
This has nothing to do with RT. Even on a non RT kernel force threaded
interrupts run obviously in thread context and therefore in_irq() returns
false when invoked from the handler.
The extension of the in_irq() check with !in_serving_softirq() was there
when the drivers were added, but in the out of tree FSL BSP the original
condition was in_irq() which got extended due to failures on RT.
The usage of in_xxx() in drivers is phased out and Linus clearly requested
that code which changes behaviour depending on context should either be
separated or the context be conveyed in an argument passed by the caller,
which usually knows the context. Right he is, the above construct is
clearly showing why.
The following callchains have been analyzed to end up in
dpaa_eth_napi_schedule():
qman_p_poll_dqrr()
__poll_portal_fast()
fq->cb.dqrr()
dpaa_eth_napi_schedule()
portal_isr()
__poll_portal_fast()
fq->cb.dqrr()
dpaa_eth_napi_schedule()
Both need to schedule NAPI.
The crypto part has another code path leading up to this:
kill_fq()
empty_retired_fq()
qman_p_poll_dqrr()
__poll_portal_fast()
fq->cb.dqrr()
dpaa_eth_napi_schedule()
kill_fq() is called from task context and ends up scheduling NAPI, but
that's pointless and an unintended side effect of the !in_serving_softirq()
check.
The code path:
caam_qi_poll() -> qman_p_poll_dqrr()
is invoked from NAPI and I *assume* from crypto's NAPI device and not
from qbman's NAPI device. I *guess* it is okay to skip scheduling NAPI
(because this is what happens now) but could be changed if it is wrong
due to `budget' handling.
Add an argument to __poll_portal_fast() which is true if NAPI needs to be
scheduled. This requires propagating the value to the caller including
`qman_cb_dqrr' typedef which is used by the dpaa and the crypto driver.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Herbert XS <herbert@gondor.apana.org.au>
Cc: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Tested-by: Camelia Groza <camelia.groza@nxp.com>
|
|
This fixes compile warnings from the -Wpacked-not-aligned option.
In file included from ../drivers/crypto/caam/qi.c:12:
../include/soc/fsl/qman.h:259:1: warning: alignment 1 of ‘struct qm_dqrr_entry’ is less than 8 [-Wpacked-not-aligned]
} __packed;
^
../include/soc/fsl/qman.h:292:2: warning: alignment 1 of ‘struct <anonymous>’ is less than 8 [-Wpacked-not-aligned]
} __packed ern;
^
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
The current codebase makes use of one-element arrays in the following
form:
struct something {
int length;
u8 data[1];
};
struct something *instance;
instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);
but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on. So, replace
the one-element array with a flexible-array member.
Also, make use of the new struct_size() helper to properly calculate the
size of struct qe_firmware.
This issue was found with the help of Coccinelle and, audited and fixed
_manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Fixes the following sparse warnings, some of these endian issues are
real issues that need to be fixed.
drivers/soc/fsl/qe/ucc_slow.c:78:17: warning: incorrect type in assignment (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:78:17: expected struct ucc_slow *us_regs
drivers/soc/fsl/qe/ucc_slow.c:78:17: got struct ucc_slow [noderef] <asn:2> *us_regs
drivers/soc/fsl/qe/ucc_slow.c:81:18: warning: incorrect type in argument 1 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:81:18: expected void const volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:81:18: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:90:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:90:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:90:9: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:99:17: warning: incorrect type in assignment (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:99:17: expected struct ucc_slow *us_regs
drivers/soc/fsl/qe/ucc_slow.c:99:17: got struct ucc_slow [noderef] <asn:2> *us_regs
drivers/soc/fsl/qe/ucc_slow.c:102:18: warning: incorrect type in argument 1 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:102:18: expected void const volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:102:18: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:111:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:111:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:111:9: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:172:28: warning: Using plain integer as NULL pointer
drivers/soc/fsl/qe/ucc_slow.c:174:25: warning: cast removes address space '<asn:2>' of expression
drivers/soc/fsl/qe/ucc_slow.c:175:25: warning: cast removes address space '<asn:2>' of expression
drivers/soc/fsl/qe/ucc_slow.c:194:23: warning: incorrect type in assignment (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:194:23: expected struct ucc_slow_pram *us_pram
drivers/soc/fsl/qe/ucc_slow.c:194:23: got void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:204:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:204:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:204:9: got restricted __be16 *
drivers/soc/fsl/qe/ucc_slow.c:229:41: warning: incorrect type in assignment (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:229:41: expected struct qe_bd *tx_bd
drivers/soc/fsl/qe/ucc_slow.c:229:41: got void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:232:17: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:232:17: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:232:17: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:234:17: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:234:17: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:234:17: got unsigned int [usertype] *
drivers/soc/fsl/qe/ucc_slow.c:238:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:238:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:238:9: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: cast from restricted __be32
drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: incorrect type in argument 1 (different base types)
drivers/soc/fsl/qe/ucc_slow.c:239:9: expected unsigned int [usertype] val
drivers/soc/fsl/qe/ucc_slow.c:239:9: got restricted __be32 [usertype]
drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: cast from restricted __be32
drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:239:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:239:9: got unsigned int [usertype] *
drivers/soc/fsl/qe/ucc_slow.c:242:26: warning: incorrect type in assignment (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:242:26: expected struct qe_bd *rx_bd
drivers/soc/fsl/qe/ucc_slow.c:242:26: got void [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_slow.c:245:17: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:245:17: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:245:17: got unsigned int [usertype] *
drivers/soc/fsl/qe/ucc_slow.c:247:17: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:247:17: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:247:17: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: cast from restricted __be32
drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: incorrect type in argument 1 (different base types)
drivers/soc/fsl/qe/ucc_slow.c:251:9: expected unsigned int [usertype] val
drivers/soc/fsl/qe/ucc_slow.c:251:9: got restricted __be32 [usertype]
drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: cast from restricted __be32
drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:251:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:251:9: got unsigned int [usertype] *
drivers/soc/fsl/qe/ucc_slow.c:252:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:252:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:252:9: got restricted __be32 *
drivers/soc/fsl/qe/ucc_slow.c:276:39: warning: mixing different enum types:
drivers/soc/fsl/qe/ucc_slow.c:276:39: unsigned int enum ucc_slow_tx_oversampling_rate
drivers/soc/fsl/qe/ucc_slow.c:276:39: unsigned int enum ucc_slow_rx_oversampling_rate
drivers/soc/fsl/qe/ucc_slow.c:296:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:296:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:296:9: got restricted __be16 *
drivers/soc/fsl/qe/ucc_slow.c:297:9: warning: incorrect type in argument 2 (different address spaces)
drivers/soc/fsl/qe/ucc_slow.c:297:9: expected void volatile [noderef] <asn:2> *addr
drivers/soc/fsl/qe/ucc_slow.c:297:9: got restricted __be16 *
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Fixes the following sparse warnings:
drivers/soc/fsl/qe/ucc_fast.c:218:22: warning: incorrect type in assignment (different base types)
drivers/soc/fsl/qe/ucc_fast.c:218:22: expected unsigned int [noderef] [usertype] <asn:2> *p_ucce
drivers/soc/fsl/qe/ucc_fast.c:218:22: got restricted __be32 [noderef] <asn:2> *
drivers/soc/fsl/qe/ucc_fast.c:219:22: warning: incorrect type in assignment (different base types)
drivers/soc/fsl/qe/ucc_fast.c:219:22: expected unsigned int [noderef] [usertype] <asn:2> *p_uccm
drivers/soc/fsl/qe/ucc_fast.c:219:22: got restricted __be32 [noderef] <asn:2> *
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
|
|
Update of QMAN the interface to enqueue frame. We now support multiple
enqueue (qbman_swp_enqueue_multiple) and multiple enqueue with
a table of descriptor (qbman_swp_enqueue_multiple_desc).
Signed-off-by: Youri Querry <youri.querry_1@nxp.com>
Acked-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
When building this on a 64-bit platform gcc rightly warns that the
error checking is broken (-ENOMEM stored in an u32 does not compare
greater than (unsigned long)-MAX_ERRNO). Instead, change the
ucc_fast_[tr]x_virtual_fifo_base_offset members to s32 and use an
ordinary check-for-negative. Also, this avoids treating 0 as "this
cannot have been returned from qe_muram_alloc() so don't free it".
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
When trying to build this for a 64-bit platform, one gets warnings
from using IS_ERR_VALUE on something which is not sizeof(long).
Instead, change the various *_offset fields to store a signed integer,
and simply check for a negative return from qe_muram_alloc(). Since
qe_muram_free() now accepts and ignores a negative argument, we only
need to make sure these fields are initialized with -1, and we can
just unconditionally call qe_muram_free() in ucc_slow_free().
Note that the error case for us_pram_offset failed to set that field
to 0 (which, as noted earlier, is anyway a bogus sentinel value).
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Nobody uses the return value from cpm_muram_free, and functions that
free resources usually return void. One could imagine a use for a "how
much have I allocated" a la ksize(), but knowing how much one had
access to after the fact is useless.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
There are a number of problems with cpm_muram_alloc() and its
callers. Most callers assign the return value to some variable and
then use IS_ERR_VALUE to check for allocation failure. However, when
that variable is not sizeof(long), this leads to warnings - and it is
indeed broken to do e.g.
u32 foo = cpm_muram_alloc();
if (IS_ERR_VALUE(foo))
on a 64-bit platform, since the condition
foo >= (unsigned long)-ENOMEM
is tautologically false. There are also callers that ignore the
possibility of error, and then there are those that check for error by
comparing the return value to 0...
One could fix that by changing all callers to store the return value
temporarily in an "unsigned long" and test that. However, use of
IS_ERR_VALUE() is error-prone and should be restricted to things which
are inherently long-sized (stuff in pt_regs etc.). Instead, let's aim
for changing to the standard kernel style
int foo = cpm_muram_alloc();
if (foo < 0)
deal_with_it()
some->where = foo;
Changing the return type from unsigned long to s32 (aka signed int)
doesn't change the value that gets stored into any of the callers'
variables except if the caller was storing the result in a u64 _and_
the allocation failed, so in itself this patch should be a no-op.
Another problem with cpm_muram_alloc() is that it can certainly
validly return 0 - and except if some cpm_muram_alloc_fixed() call
interferes, the very first cpm_muram_alloc() call will return just
that. But that shows that both ucc_slow_free() and ucc_fast_free() are
buggy, since they assume that a value of 0 means "that field was never
allocated". We'll later change cpm_muram_free() to accept (and ignore)
a negative offset, so callers can use a sentinel of -1 instead of 0
and just unconditionally call cpm_muram_free().
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
asm/cpm.h under arch/powerpc is now just a wrapper for including
soc/fsl/cpm.h. In order to make the qe.h header usable on other
architectures, use the latter path directly.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Some drivers, e.g. ucc_uart, need definitions from cpm.h. In order to
allow building those drivers for non-ppc based SOCs, move the header
to include/soc/fsl. For now, leave a trivial wrapper at the old
location so drivers can be updated one by one.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
The public qe_ic.h header is no longer included by anything but
qe_ic.c. Merge both headers into qe_ic.c, and drop the unused
constants.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
These are only called from within qe_ic.c, so make them static.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
There are no current callers of these functions, and they use the
ppc-specific virq_to_hw(). So removing them gets us one step closer to
building QE support for ARM.
If the functionality is ever actually needed, the code can be dug out
of git and then adapted to work on all architectures, but for future
reference please note that I believe qe_ic_set_priority is buggy: The
"priority < 4" should be "priority <= 4", and in the else branch 24
should be replaced by 28, at least if I'm reading the data sheet right.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
These functions are only ever called through a function pointer, and
therefore it makes no sense for them to be "static inline" - gcc has
no choice but to emit a copy in each translation unit that takes the
address of one of these. Since they are now only referenced from
qe_ic.c, just make them local to that file.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Having to call qe_ic_init() from platform-specific code makes it
awkward to allow building the QE drivers for ARM. It's also a needless
duplication of code, and slightly error-prone: Instead of the caller
needing to know the details of whether the QUICC Engine High and QUICC
Engine Low are actually the same interrupt (see e.g. the machine_is()
in mpc85xx_mds_qeic_init), just let the init function choose the
appropriate handlers after it has parsed the DT and figured it out. If
the two interrupts are distinct, use separate handlers, otherwise use
the handler which first checks the CHIVEC register (for the high
priority interrupts), then the CIVEC.
All existing callers pass 0 for flags, so continue to do that from the
new single caller. Later cleanups will remove that argument
from qe_ic_init and simplify the body, as well as make qe_ic_init into
a proper init function for an IRQCHIP_DECLARE, eliminating the need to
manually look up the fsl,qe-ic node.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
The *_ipic and *_mpic handlers are almost identical - the only
difference is that the latter end with an unconditional
chip->irq_eoi() call. Since IPIC does not have ->irq_eoi, we can
reduce some code duplication by calling irq_eoi conditionally.
This is similar to what is already done in mpc8xxx_gpio_irq_cascade().
This leaves the functions slightly misnamed, but that will be fixed in
a subsequent patch.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
The QUICC engine drivers use the powerpc-specific out_be32() etc. In
order to allow those drivers to build for other architectures, those
must be replaced by iowrite32be(). However, on powerpc, out_be32() is
a simple inline function while iowrite32be() is out-of-line. So in
order not to introduce a performance regression on powerpc when making
the drivers work on other architectures, introduce qe_io* helpers.
Also define the qe_{clr,set,clrset}bits* helpers in terms of these new
macros.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Make it clear that these operate on big-endian registers (i.e. use the
iowrite*be primitives) before we introduce more uses of them and allow
the QE drivers to be built for platforms other than ppc32.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Before this change, unbinding the QMan portals did not trigger a
corresponding unbinding of the dpaa_eth making use of it; the first
QMan portal related operation issued afterwards crashed the kernel.
The device link ensures the dpaa_eth dependency upon the qman portal
used is honoured at the QMan portal removal.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce the API required to make sure that the devices that use
the QMan portal are unbound when the portal is unbound.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
into mauro
Bring in a set of post-thrashup fixes from Mauro.
|
|
Convert docs to ReST and add them to the arch-specific
book.
The conversion here was trivial, as almost every file there
was already using an elegant format close to ReST standard.
The changes were mostly to mark literal blocks and add a few
missing section title identifiers.
One note with regards to "--": on Sphinx, this can't be used
to identify a list, as it will format it badly. This can be
used, however, to identify a long hyphen - and "---" is an
even longer one.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> # cxl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers
NXP/FSL SoC driver updates for v5.3
DPAA2 Console driver
- Add driver to export two char devices to dump logs for MC and
AIOP
DPAA2 DPIO driver
- Add support for memory backed QBMan portals
- Increase the timeout period to prevent false error
- Add APIs to retrieve QBMan portal probing status
DPAA Qman driver
- Only make liodn fixup on powerpc SoCs with PAMU iommu
* tag 'soc-fsl-next-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: qbman_portals: add APIs to retrieve the probing status
soc: fsl: qman: fixup liodns only on ppc targets
soc: fsl: dpio: Add support for memory backed QBMan portals
bus: mc-bus: Add support for mapping shareable portals
soc: fsl: dpio: Increase timeout for QBMan Management Commands
soc: fsl: add DPAA2 console support
Documentation: DT: Add entry for DPAA2 console
soc: fsl: guts: Add definition for LX2160A
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a couple of new APIs to check the probing status of the required
cpu bound qman and bman portals:
'int bman_portals_probed()' and 'int qman_portals_probed()'.
They return the following values.
* 1 if qman/bman portals were all probed correctly
* 0 if qman/bman portals were not yet probed
* -1 if probing of qman/bman portals failed
Portals are considered successful probed if no error occurred during
the probing of any of the portals and if enough portals were probed
to have one available for each cpu.
The error handling paths were slightly rearranged in order to fit this
new functionality without being too intrusive.
Drivers that use qman/bman portal driver services are required to use
these APIs before calling any functions exported by these drivers or
otherwise they will crash the kernel.
First user will be the dpaa1 ethernet driver, coming in a subsequent
patch.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
In all QBMan registers, the buffer pool id field is two bytes long.
The low level qbman APIs reflect this, but the high level DPIO ones
use u32. Modify them in order to avoid implicit downcasts.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Automatically add a device link between the actual device requesting the
dpaa2_io_service_register and the underlying dpaa2_io used. This link
will ensure that when a DPIO device, which is indirectly used by other
devices, is unbound any consumer devices will be also unbound from their
drivers.
For example, any DPNI, bound to the dpaa2-eth driver, which is using
DPIO devices will be unbound before its supplier device.
Also, add a new parameter to the dpaa2_io_service_[de]register functions
to specify the requesting device (ie the consumer).
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Add a new field in the dpaa2_io structure to hold a backpointer to the
actual DPIO device.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
The current implementation of the dpio driver uses a static next_cpu
variable to keep track of the index of the next cpu available. This
approach does not handle well unbinding and binding dpio devices in a
random order. For example, unbinding a dpio and then binding it again
with the driver, will generate the below error:
$ echo dpio.5 > /sys/bus/fsl-mc/drivers/fsl_mc_dpio/unbind
$ echo dpio.5 > /sys/bus/fsl-mc/drivers/fsl_mc_dpio/bind
[ 103.946380] fsl_mc_dpio dpio.5: probe failed. Number of DPIOs exceeds
NR_CPUS.
[ 103.955157] fsl_mc_dpio dpio.5: fsl_mc_driver_probe failed: -34
-bash: echo: write error: No such device
Fix this error by keeping a global cpumask of unused cpus that will be
updated at every dpaa2_dpio_[probe,remove].
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Add FQ (Frame Queue) and BP (Buffer Pool) query APIs that
users of QBMan can invoke to see the status of the queues
and pools that they are using.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check that the values received by the portal interrupt coalesce
change APIs are in range.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The most noteworthy SoC driver changes this time include:
- The TEE subsystem gains an in-kernel interface to access the TEE
from device drivers.
- The reset controller subsystem gains a driver for the Qualcomm
Snapdragon 845 Power Domain Controller.
- The Xilinx Zynq platform now has a firmware interface for its
platform management unit. This contains a firmware "ioctl"
interface that was a little controversial at first, but the version
we merged solved that by not exposing arbitrary firmware calls to
user space.
- The Amlogic Meson platform gains a "canvas" driver that is used for
video processing and shared between different high-level drivers.
The rest is more of the usual, mostly related to SoC specific power
management support and core drivers in drivers/soc:
- Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new
features related to power and reset control.
- The Mediatek mt8183 and mt6765 SoC platforms gain support for their
respective power management chips.
- A new driver for NXP i.MX8, which need a firmware interface for
power management.
- The SCPI firmware interface now contains support estimating power
usage of performance states
- The NVIDIA Tegra "pmc" driver gains a few new features, in
particular a pinctrl interface for configuring the pads.
- Lots of small changes for Qualcomm, in particular the "smem" device
driver.
- Some cleanups for the TI OMAP series related to their sysc
controller.
Additional cleanups and bugfixes in SoC specific drivers include the
Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits)
firmware: tegra: bpmp: Implement suspend/resume support
drivers: clk: Add ZynqMP clock driver
dt-bindings: clock: Add bindings for ZynqMP clock driver
firmware: xilinx: Add zynqmp IOCTL API for device control
Documentation: xilinx: Add documentation for eemi APIs
MAINTAINERS: imx: include drivers/firmware/imx path
firmware: imx: add misc svc support
firmware: imx: add SCU firmware driver support
reset: Fix potential use-after-free in __of_reset_control_get()
dt-bindings: arm: fsl: add scu binding doc
soc: fsl: qbman: add interrupt coalesce changing APIs
soc: fsl: bman_portals: defer probe after bman's probe
soc: fsl: qbman: Use last response to determine valid bit
soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan
soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers
soc: fsl: qbman: Check if CPU is offline when initializing portals
reset: qcom: PDC Global (Power Domain Controller) reset controller
dt-bindings: reset: Add PDC Global binding for SDM845 SoCs
reset: Grammar s/more then once/more than once/
bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Remove VLA usage
- Add cryptostat user-space interface
- Add notifier for new crypto algorithms
Algorithms:
- Add OFB mode
- Remove speck
Drivers:
- Remove x86/sha*-mb as they are buggy
- Remove pcbc(aes) from x86/aesni
- Improve performance of arm/ghash-ce by up to 85%
- Implement CTS-CBC in arm64/aes-blk, faster by up to 50%
- Remove PMULL based arm64/crc32 driver
- Use PMULL in arm64/crct10dif
- Add aes-ctr support in s5p-sss
- Add caam/qi2 driver
Others:
- Pick better transform if one becomes available in crc-t10dif"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits)
crypto: chelsio - Update ntx queue received from cxgb4
crypto: ccree - avoid implicit enum conversion
crypto: caam - add SPDX license identifier to all files
crypto: caam/qi - simplify CGR allocation, freeing
crypto: mxs-dcp - make symbols 'sha1_null_hash' and 'sha256_null_hash' static
crypto: arm64/aes-blk - ensure XTS mask is always loaded
crypto: testmgr - fix sizeof() on COMP_BUF_SIZE
crypto: chtls - remove set but not used variable 'csk'
crypto: axis - fix platform_no_drv_owner.cocci warnings
crypto: x86/aes-ni - fix build error following fpu template removal
crypto: arm64/aes - fix handling sub-block CTS-CBC inputs
crypto: caam/qi2 - avoid double export
crypto: mxs-dcp - Fix AES issues
crypto: mxs-dcp - Fix SHA null hashes and output length
crypto: mxs-dcp - Implement sha import/export
crypto: aegis/generic - fix for big endian systems
crypto: morus/generic - fix for big endian systems
crypto: lrw - fix rebase error after out of bounds fix
crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X.
crypto: cavium/nitrox - NITROX command queue changes.
...
|
|
Extract error information from rx and tx buffer descriptors,
and update error counters.
Signed-off-by: Mathias Thore <mathias.thore@infinera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the APIs required to control the QMan portal interrupt coalescing
settings.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Add a couple of new APIs to check the probing status of qman and bman:
'int bman_is_probed()' and 'int qman_is_probed()'.
They return the following values.
* 1 if qman/bman were probed correctly
* 0 if qman/bman were not yet probed
* -1 if probing of qman/bman failed
Drivers that use qman/bman driver services are required to use these
APIs before calling any functions exported by qman or bman drivers
or otherwise they will crash the kernel.
The APIs will be used in the following couple of qbman portal patches
and later in the series in the dpaa1 ethernet driver.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Add support for Congestion State Change Notifications (CSCN), which
allow DPIO users to be notified when a congestion group changes its
state (due to hitting the entrance / exit threshold).
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for dpaa2_fd_list format, i.e. dpaa2_fl_entry structure
and accessors.
Frame list entries (FLEs) are similar, but not identical to FDs:
+ "F" (final) bit
- FMT[b'01] is reserved
- DD, SC, DROPP bits (covered by "FD compatibility" field in FLE case)
- FLC[5:0] not used for stashing
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This commit adds back functions removed in
commit a211c8170b3c ("staging: fsl-mc/dpio: remove couple of unused functions")
since dpseci object will make use of them.
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move the NXP DPIO (Datapath I/O Driver) out of the
drivers/staging directory and into the drivers/soc/fsl directory.
The DPIO driver enables access to Queue and Buffer Manager (QBMAN)
hardware on NXP DPAA2 devices. This is a prerequisite to moving the
DPAA2 Ethernet driver out of staging.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
This adds support for hdlc-bus mode to the fsl_ucc_hdlc driver. This can
be enabled with the "fsl,hdlc-bus" property in the DTS node of the
corresponding ucc.
This aligns the configuration of the UPSMR and GUMR registers to what is
done in our ucc_hdlc driver (that only support hdlc-bus mode) and with
the QuickEngine's documentation for hdlc-bus mode.
GUMR/SYNL is set to AUTO for the busmode as in this case the CD signal
is ignored. The brkpt_support is enabled to set the HBM1 bit in the
CMXUCR register to configure an open-drain connected HDLC bus.
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
