summaryrefslogtreecommitdiff
path: root/include/soc
AgeCommit message (Collapse)Author
2021-02-26Merge tag 'riscv-for-linus-5.12-mw0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...
2021-02-22clk: Add RISC-V Canaan Kendryte K210 clock driverDamien Le Moal
Add a clock provider driver for the Canaan Kendryte K210 RISC-V SoC. This new driver with the compatible string "canaan,k210-clk" implements support for the full clock structure of the K210 SoC. Since it is required for the correct operation of the SoC, this driver is selected by default for compilation when the SOC_CANAAN option is selected. With this change, the k210-sysctl driver is turned into a simple platform driver which enables its power bus clock and triggers populating its child nodes. The sysctl driver retains the SOC early initialization code, but the implementation now relies on the new function k210_clk_early_init() provided by the new clk-k210 driver. The clock structure implemented and many of the coding ideas for the driver come from the work by Sean Anderson on the K210 support for the U-Boot project. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-22Merge tag 'iommu-updates-v5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - ARM SMMU and Mediatek updates from Will Deacon: - Support for MT8192 IOMMU from Mediatek - Arm v7s io-pgtable extensions for MT8192 - Removal of TLBI_ON_MAP quirk - New Qualcomm compatible strings - Allow SVA without hardware broadcast TLB maintenance on SMMUv3 - Virtualization Host Extension support for SMMUv3 (SVA) - Allow SMMUv3 PMU perf driver to be built independently from IOMMU - Some tidy-up in IOVA and core code - Conversion of the AMD IOMMU code to use the generic IO-page-table framework - Intel VT-d updates from Lu Baolu: - Audit capability consistency among different IOMMUs - Add SATC reporting structure support - Add iotlb_sync_map callback support - SDHI support for Renesas IOMMU driver - Misc cleanups and other small improvments * tag 'iommu-updates-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (94 commits) iommu/amd: Fix performance counter initialization MAINTAINERS: repair file pattern in MEDIATEK IOMMU DRIVER iommu/mediatek: Fix error code in probe() iommu/mediatek: Fix unsigned domid comparison with less than zero iommu/vt-d: Parse SATC reporting structure iommu/vt-d: Add new enum value and structure for SATC iommu/vt-d: Add iotlb_sync_map callback iommu/vt-d: Move capability check code to cap_audit files iommu/vt-d: Audit IOMMU Capabilities and add helper functions iommu/vt-d: Fix 'physical' typos iommu: Properly pass gfp_t in _iommu_map() to avoid atomic sleeping iommu/vt-d: Fix compile error [-Werror=implicit-function-declaration] driver/perf: Remove ARM_SMMU_V3_PMU dependency on ARM_SMMU_V3 MAINTAINERS: Add entry for MediaTek IOMMU iommu/mediatek: Add mt8192 support iommu/mediatek: Remove unnecessary check in attach_device iommu/mediatek: Support master use iova over 32bit iommu/mediatek: Add iova reserved function iommu/mediatek: Support for multi domains iommu/mediatek: Add get_domain_id from dev->dma_range_map ...
2021-02-20Merge tag 'arm-drivers-v5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: SCMI firmware: - add support for a completion interrupt Reset controllers: - new driver for BCM4908 - new devm_reset_control_get_optional_exclusive_released() function Memory controllers: - Renesas RZ/G2 support - Tegra124 interconnect support - Allow more drivers to be loadable modules TEE/optee firmware: - minor code cleanup The other half of this is SoC specific drivers that do not belong into any other subsystem, most of them living in drivers/soc: - Allwinner/sunxi power management work - Allwinner H616 support - ASpeed AST2600 system identification support - AT91 SAMA7G5 SoC ID driver - AT91 SoC driver cleanups - Broadcom BCM4908 power management bus support - Marvell mbus cleanups - Mediatek MT8167 power domain support - Qualcomm socinfo driver support for PMIC - Qualcomm SoC identification for many more products - TI Keystone driver cleanups for PRUSS and elsewhere" * tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (89 commits) soc: aspeed: socinfo: Add new systems soc: aspeed: snoop: Add clock control logic memory: tegra186-emc: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE memory: samsung: exynos5422-dmc: Correct function names in kerneldoc memory: ti-emif-pm: Drop of_match_ptr from of_device_id table optee: simplify i2c access drivers: soc: atmel: fix type for same7 tee: optee: remove need_resched() before cond_resched() soc: qcom: ocmem: don't return NULL in of_get_ocmem optee: sync OP-TEE headers tee: optee: fix 'physical' typos drivers: optee: use flexible-array member instead of zero-length array tee: fix some comment typos in header files soc: ti: k3-ringacc: Use of_device_get_match_data() soc: ti: pruss: Refactor the CFG sub-module init soc: mediatek: pm-domains: Don't print an error if child domain is deferred soc: mediatek: pm-domains: Add domain regulator supply dt-bindings: power: Add domain regulator supply soc: mediatek: cmdq: Remove cmdq_pkt_flush() soc: mediatek: pm-domains: Add support for mt8167 ...
2021-02-16net: mscc: ocelot: Add support for MRPHoratiu Vultur
Add basic support for MRP. The HW will just trap all MRP frames on the ring ports to CPU and allow the SW to process them. In this way it is possible to for this node to behave both as MRM and MRC. Current limitations are: - it doesn't support Interconnect roles. - it supports only a single ring. - the HW should be able to do forwarding of MRP Test frames so the SW will not need to do this. So it would be able to have the role MRC without SW support. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-14net: dsa: tag_ocelot_8021q: add support for PTP timestampingVladimir Oltean
For TX timestamping, we use the felix_txtstamp method which is common with the regular (non-8021q) ocelot tagger. This method says that skb deferral is needed, prepares a timestamp request ID, and puts a clone of the skb in a queue waiting for the timestamp IRQ. felix_txtstamp is called by dsa_skb_tx_timestamp() just before the tagger's xmit method. In the tagger xmit, we divert the packets classified by dsa_skb_tx_timestamp() as PTP towards the MMIO-based injection registers, and we declare them as dead towards dsa_slave_xmit. If not PTP, we proceed with normal tag_8021q stuff. Then the timestamp IRQ fires, the clone queued up from felix_txtstamp is matched to the TX timestamp retrieved from the switch's FIFO based on the timestamp request ID, and the clone is delivered to the stack. On RX, thanks to the VCAP IS2 rule that redirects the frames with an EtherType for 1588 towards two destinations: - the CPU port module (for MMIO based extraction) and - if the "no XTR IRQ" workaround is in place, the dsa_8021q CPU port the relevant data path processing starts in the ptp_classify_raw BPF classifier installed by DSA in the RX data path (post tagger, which is completely unaware that it saw a PTP packet). This time we can't reuse the same implementation of .port_rxtstamp that also works with the default ocelot tagger. That is because felix_rxtstamp is given an skb with a freshly stripped DSA header, and it says "I don't need deferral for its RX timestamp, it's right in it, let me show you"; and it just points to the header right behind skb->data, from where it unpacks the timestamp and annotates the skb with it. The same thing cannot happen with tag_ocelot_8021q, because for one thing, the skb did not have an extraction frame header in the first place, but a VLAN tag with no timestamp information. So the code paths in felix_rxtstamp for the regular and 8021q tagger are completely independent. With tag_8021q, the timestamp must come from the packet's duplicate delivered to the CPU port module, but there is potentially complex logic to be handled [ and prone to reordering ] if we were to just start reading packets from the CPU port module, and try to match them to the one we received over Ethernet and which needs an RX timestamp. So we do something simple: we tell DSA "give me some time to think" (we request skb deferral by returning false from .port_rxtstamp) and we just drop the frame we got over Ethernet with no attempt to match it to anything - we just treat it as a notification that there's data to be processed from the CPU port module's queues. Then we proceed to read the packets from those, one by one, which we deliver up the stack, timestamped, using netif_rx - the same function that any driver would use anyway if it needed RX timestamp deferral. So the assumption is that we'll come across the PTP packet that triggered the CPU extraction notification eventually, but we don't know when exactly. Thanks to the VCAP IS2 trap/redirect rule and the exclusion of the CPU port module from the flooding replicators, only PTP frames should be present in the CPU port module's RX queues anyway. There is just one conflict between the VCAP IS2 trapping rule and the semantics of the BPF classifier. Namely, ptp_classify_raw() deems general messages as non-timestampable, but still, those are trapped to the CPU port module since they have an EtherType of ETH_P_1588. So, if the "no XTR IRQ" workaround is in place, we need to run another BPF classifier on the frames extracted over MMIO, to avoid duplicates being sent to the stack (once over Ethernet, once over MMIO). It doesn't look like it's possible to install VCAP IS2 rules based on keys extracted from the 1588 frame headers. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-14net: mscc: ocelot: refactor ocelot_xtr_irq_handler into ocelot_xtr_pollVladimir Oltean
Since the felix DSA driver will need to poll the CPU port module for extracted frames as well, let's create some common functions that read an Extraction Frame Header, and then an skb, from a CPU extraction group. We abuse the struct ocelot_ops :: port_to_netdev function a little bit, in order to retrieve the DSA port net_device or the ocelot switchdev net_device based on the source port information from the Extraction Frame Header, but it's all in the benefit of code simplification - netdev_alloc_skb needs it. Originally, the port_to_netdev method was intended for parsing act->dev from tc flower offload code. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-14net: mscc: ocelot: use common tag parsing code with DSAVladimir Oltean
The Injection Frame Header and Extraction Frame Header that the switch prepends to frames over the NPI port is also prepended to frames delivered over the CPU port module's queues. Let's unify the handling of the frame headers by making the ocelot driver call some helpers exported by the DSA tagger. Among other things, this allows us to get rid of the strange cpu_to_be32 when transmitting the Injection Frame Header on ocelot, since the packing API uses network byte order natively (when "quirks" is 0). The comments above ocelot_gen_ifh talk about setting pop_cnt to 3, and the cpu extraction queue mask to something, but the code doesn't do it, so we don't do it either. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-14net: mscc: ocelot: refactor ocelot_port_inject_frame out of ocelot_port_xmitVladimir Oltean
The felix DSA driver will inject some frames through register MMIO, same as ocelot switchdev currently does. So we need to be able to reuse the common code. Also create some shim definitions, since the DSA tagger can be compiled without support for the switch driver. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12net: mscc: ocelot: offload bridge port flags to deviceVladimir Oltean
We should not be unconditionally enabling address learning, since doing that is actively detrimential when a port is standalone and not offloading a bridge. Namely, if a port in the switch is standalone and others are offloading the bridge, then we could enter a situation where we learn an address towards the standalone port, but the bridged ports could not forward the packet there, because the CPU is the only path between the standalone and the bridged ports. The solution of course is to not enable address learning unless the bridge asks for it. We need to set up the initial port flags for no learning and flooding everything, and also when the port joins and leaves the bridge. The flood configuration was already configured ok for standalone mode in ocelot_init, we just need to disable learning in ocelot_init_port. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12net: mscc: ocelot: use separate flooding PGID for broadcastVladimir Oltean
In preparation of offloading the bridge port flags which have independent settings for unknown multicast and for broadcast, we should also start reserving one destination Port Group ID for the flooding of broadcast packets, to allow configuring it individually. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2021-02-10Merge tag 'qcom-drivers-for-5.12' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for 5.12 The socinfo driver gains support for dumping information about the platform's PMICs, as well as new definitions for a number of platforms. The LLCC driver gains SM8250 support, AOSS QMP gains SM8350 support and the RPMPD driver gains support for MSM8994 power domains. In addition to this it contains a few minor fixes in the ocmem, rpmh and llcc drivers. * tag 'qcom-drivers-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: ocmem: don't return NULL in of_get_ocmem soc: qcom: socinfo: Remove unwanted le32_to_cpu() soc: qcom: aoss: Add SM8350 compatible drivers: soc: qcom: rpmpd: Add msm8994 RPM Power Domains soc: qcom: socinfo: Fix an off by one in qcom_show_pmic_model() soc: qcom: socinfo: Fix off-by-one array index bounds check soc: qcom: socinfo: Add MDM9607 IDs soc: qcom: socinfo: Add SoC IDs for APQ/MSM8998 soc: qcom: socinfo: Add SoC IDs for 630 family soc: qcom: socinfo: Open read access to all for debugfs soc: qcom: socinfo: add info from PMIC models array soc: qcom: socinfo: add several PMIC IDs soc: qcom: socinfo: add qrb5165 SoC ID soc: qcom: rpmh: Remove serialization of TCS commands soc: qcom: smem: use %*ph to print small buffer dt-bindings: soc: qcom: convert qcom,smem bindings to yaml drivers: qcom: rpmh-rsc: Do not read back the register write on trigger soc: qcom: llcc-qcom: Add support for SM8250 SoC soc: qcom: llcc-qcom: Extract major hardware version dt-bindings: msm: Add LLCC for SM8250 Link: https://lore.kernel.org/r/20210204052258.388890-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09net: dsa: felix: implement port flushing on .phylink_mac_link_downVladimir Oltean
There are several issues which may be seen when the link goes down while forwarding traffic, all of which can be attributed to the fact that the port flushing procedure from the reference manual was not closely followed. With flow control enabled on both the ingress port and the egress port, it may happen when a link goes down that Ethernet packets are in flight. In flow control mode, frames are held back and not dropped. When there is enough traffic in flight (example: iperf3 TCP), then the ingress port might enter congestion and never exit that state. This is a problem, because it is the egress port's link that went down, and that has caused the inability of the ingress port to send packets to any other port. This is solved by flushing the egress port's queues when it goes down. There is also a problem when performing stream splitting for IEEE 802.1CB traffic (not yet upstream, but a sort of multicast, basically). There, if one port from the destination ports mask goes down, splitting the stream towards the other destinations will no longer be performed. This can be traced down to this line: ocelot_port_writel(ocelot_port, 0, DEV_MAC_ENA_CFG); which should have been instead, as per the reference manual: ocelot_port_rmwl(ocelot_port, 0, DEV_MAC_ENA_CFG_RX_ENA, DEV_MAC_ENA_CFG); Basically only DEV_MAC_ENA_CFG_RX_ENA should be disabled, but not DEV_MAC_ENA_CFG_TX_ENA - I don't have further insight into why that is the case, but apparently multicasting to several ports will cause issues if at least one of them doesn't have DEV_MAC_ENA_CFG_TX_ENA set. I am not sure what the state of the Ocelot VSC7514 driver is, but probably not as bad as Felix/Seville, since VSC7514 uses phylib and has the following in ocelot_adjust_link: if (!phydev->link) return; therefore the port is not really put down when the link is lost, unlike the DSA drivers which use .phylink_mac_link_down for that. Nonetheless, I put ocelot_port_flush() in the common ocelot.c because it needs to access some registers from drivers/net/ethernet/mscc/ocelot_rew.h which are not exported in include/soc/mscc/ and a bugfix patch should probably not move headers around. Fixes: bdeced75b13f ("net: dsa: felix: Add PCS operations for PHYLINK") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-06net: dsa: felix: propagate the LAG offload ops towards the ocelot libVladimir Oltean
The ocelot switch has been supporting LAG offload since its initial commit, however felix could not make use of that, due to lack of a LAG abstraction in DSA. Now that we have that, let's forward DSA's calls towards the ocelot library, who will deal with setting up the bonding. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06net: mscc: ocelot: rebalance LAGs on link up/down eventsVladimir Oltean
At present there is an issue when ocelot is offloading a bonding interface, but one of the links of the physical ports goes down. Traffic keeps being hashed towards that destination, and of course gets dropped on egress. Monitor the netdev notifier events emitted by the bonding driver for changes in the physical state of lower interfaces, to determine which ports are active and which ones are no longer. Then extend ocelot_get_bond_mask to return either the configured bonding interfaces, or the active ones, depending on a boolean argument. The code that does rebalancing only needs to do so among the active ports, whereas the bridge forwarding mask and the logical port IDs still need to look at the permanently bonded ports. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06net: mscc: ocelot: drop the use of the "lags" arrayVladimir Oltean
We can now simplify the implementation by always using ocelot_get_bond_mask to look up the other ports that are offloading the same bonding interface as us. In ocelot_set_aggr_pgids, the code had a way to uniquely iterate through LAGs. We need to achieve the same behavior by marking each LAG as visited, which we do now by using a temporary 32-bit "visited" bitmask. This is ok and we do not need dynamic memory allocation, because we know that this switch architecture will not have more than 32 ports (the PGID port masks are 32-bit anyway). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06net: mscc: ocelot: set up the bonding mask in a way that avoids a net_deviceVladimir Oltean
Since this code should be called from pure switchdev as well as from DSA, we must find a way to determine the bonding mask not by looking directly at the net_device lowers of the bonding interface, since those could have different private structures. We keep a pointer to the bonding upper interface, if present, in struct ocelot_port. Then the bonding mask becomes the bitwise OR of all ports that have the same bonding upper interface. This adds a duplication of functionality with the current "lags" array, but the duplication will be short-lived, since further patches will remove the latter completely. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02Merge tag 'arm-soc/for-5.12/drivers' of https://github.com/Broadcom/stblinux ↵Arnd Bergmann
into arm/drivers This pull request contains Broadcom SoCs drivers changes for 5.12, please pull the following: - Rafal adds support for the Power Management Bus (PMB) which is used in a variety of DSL/Cable modem/STB SoCs with a primary target being the 4908 Wi-Fi SoC from the DSL organization. He also adds empty stubs to get the chip identification (family and revision) to permit the Broadcom STB USB PHY driver from being decoupled from ARCH_BRCMSTB - Florian removes an unused function and its header * tag 'arm-soc/for-5.12/drivers' of https://github.com/Broadcom/stblinux: soc: bcm: brcmstb: Remove soc_is_brcmstb() soc: bcm: brcmstb: add stubs for getting platform IDs soc: bcm: add PM driver for Broadcom's PMB dt-bindings: power: document Broadcom's PMB binding Link: https://lore.kernel.org/r/20210131221721.685974-5-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-02Merge tag 'memory-controller-drv-tegra-5.12' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers Memory controller drivers for v5.12 - Tegra SoC 1. Make the tegra124-emc driver modular. 2. Add interconnect support to Tegra124 memory controller drivers. 3. Minor fixes. * tag 'memory-controller-drv-tegra-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: tegra: Remove calls to dev_pm_opp_set_clkname() memory: tegra: Check whether reset is already asserted memory: tegra124: Support interconnect framework memory: tegra124-emc: Continue probing if timings are missing in device-tree memory: tegra124-emc: Make driver modular Link: https://lore.kernel.org/r/20210131180109.11510-2-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-02Merge tag 'memory-controller-drv-5.12' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers Memory controller drivers for v5.12 1. Mediatek SMI: fix PM usage counter and make the driver modular. 2. Renesas RPC-IF: add support for RZ/G2 series. 3. Minor fixes. * tag 'memory-controller-drv-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: mtk-smi: Allow building as module memory: ti-aemif: Drop child node when jumping out loop memory: mtk-smi: Use platform_register_drivers memory: renesas-rpc-if: Add RZ/G2 to Kconfig description dt-bindings: memory: renesas,rpc-if: Add support for RZ/G2 Series memory: emif: Use DEFINE_SPINLOCK() for spinlock memory: mtk-smi: Fix PM usage counter unbalance in mtk_smi ops Link: https://lore.kernel.org/r/20210131180109.11510-1-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-02Merge tag 'arm-smmu-updates' of ↵Joerg Roedel
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu Arm SMMU updates for 5.12 - Support for MT8192 IOMMU from Mediatek - Arm v7s io-pgtable extensions for MT8192 - Removal of TLBI_ON_MAP quirk - New Qualcomm compatible strings - Allow SVA without hardware broadcast TLB maintenance on SMMUv3 - Virtualization Host Extension support for SMMUv3 (SVA) - Allow SMMUv3 PMU (perf) driver to be built independently from IOMMU - Misc cleanups
2021-02-01iommu/mediatek: Support master use iova over 32bitYong Wu
After extending v7s, our pagetable already support iova reach 16GB(34bit). the master got the iova via dma_alloc_attrs may reach 34bits, but its HW register still is 32bit. then how to set the bit32/bit33 iova? this depend on a SMI larb setting(bank_sel). we separate whole 16GB iova to four banks: bank: 0: 0~4G; 1: 4~8G; 2: 8-12G; 3: 12-16G; The bank number is (iova >> 32). We will preassign which bank the larbs belong to. currently we don't have a interface for master to adjust its bank number. Each a bank is a iova_region which is a independent iommu-domain. the iova range for each iommu-domain can't cross 4G. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> #for memory part Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-31-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-02-01iommu/mediatek: Use the common mtk-memory-port.hYong Wu
Use the common memory header(larb-port) in the source code. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-9-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-29net: dsa: felix: perform switch setup for tag_8021qVladimir Oltean
Unlike sja1105, the only other user of the software-defined tag_8021q.c tagger format, the implementation we choose for the Felix DSA switch driver preserves full functionality under a vlan_filtering bridge (i.e. IP termination works through the DSA user ports under all circumstances). The tag_8021q protocol just wants: - Identifying the ingress switch port based on the RX VLAN ID, as seen by the CPU. We achieve this by using the TCAM engines (which are also used for tc-flower offload) to push the RX VLAN as a second, outer tag, on egress towards the CPU port. - Steering traffic injected into the switch from the network stack towards the correct front port based on the TX VLAN, and consuming (popping) that header on the switch's egress. A tc-flower pseudocode of the static configuration done by the driver would look like this: $ tc qdisc add dev <cpu-port> clsact $ for eth in swp0 swp1 swp2 swp3; do \ tc filter add dev <cpu-port> egress flower indev ${eth} \ action vlan push id <rxvlan> protocol 802.1ad; \ tc filter add dev <cpu-port> ingress protocol 802.1Q flower vlan_id <txvlan> action vlan pop \ action mirred egress redirect dev ${eth}; \ done but of course since DSA does not register network interfaces for the CPU port, this configuration would be impossible for the user to do. Also, due to the same reason, it is impossible for the user to inadvertently delete these rules using tc. These rules do not collide in any way with tc-flower, they just consume some TCAM space, which is something we can live with. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29net: mscc: ocelot: don't use NPI tag prefix for the CPU port moduleVladimir Oltean
Context: Ocelot switches put the injection/extraction frame header in front of the Ethernet header. When used in NPI mode, a DSA master would see junk instead of the destination MAC address, and it would most likely drop the packets. So the Ocelot frame header can have an optional prefix, which is just "ff:ff:ff:ff:ff:fe > ff:ff:ff:ff:ff:ff" padding put before the actual tag (still before the real Ethernet header) such that the DSA master thinks it's looking at a broadcast frame with a strange EtherType. Unfortunately, a lesson learned in commit 69df578c5f4b ("net: mscc: ocelot: eliminate confusion between CPU and NPI port") seems to have been forgotten in the meanwhile. The CPU port module and the NPI port have independent settings for the length of the tag prefix. However, the driver is using the same variable to program both of them. There is no reason really to use any tag prefix with the CPU port module, since that is not connected to any Ethernet port. So this patch makes the inj_prefix and xtr_prefix variables apply only to the NPI port (which the switchdev ocelot_vsc7514 driver does not use). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29net: mscc: ocelot: store a namespaced VCAP filter IDVladimir Oltean
We will be adding some private VCAP filters that should not interfere in any way with the filters added using tc-flower. So we need to allocate some IDs which will not be used by tc. Currently ocelot uses an u32 id derived from the flow cookie, which in itself is an unsigned long. This is a problem in itself, since on 64 bit systems, sizeof(unsigned long)=8, so the driver is already truncating these. Create a struct ocelot_vcap_id which contains the full unsigned long cookie from tc, as well as a boolean that is supposed to namespace the filters added by tc with the ones that aren't. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29net: mscc: ocelot: export VCAP structures to include/soc/msccVladimir Oltean
The Felix driver will need to preinstall some VCAP filters for its tag_8021q implementation (outside of the tc-flower offload logic), so these need to be exported to the common includes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27soc: bcm: brcmstb: Remove soc_is_brcmstb()Florian Fainelli
We have no in tree or out of tree users of this function, remove it and the header providing its prototype. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-01-26memory: mtk-smi: Allow building as moduleYong Wu
Add support for building the SMI driver as module. Switch MTK_SMI to tristate, and add module_exit/module_license. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20210126060055.11050-1-yong.wu@mediatek.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2021-01-21ethernet: ucc_geth: remove bd_mem_part and all associated codeRasmus Villemoes
The bd_mem_part member of ucc_geth_info always has the value MEM_PART_SYSTEM, and AFAICT, there has never been any code setting it to any other value. Moreover, muram is a somewhat precious resource, so there's no point using that when normal memory serves just as well. Apart from removing a lot of dead code, this is also motivated by wanting to clean up the "store result from kmalloc() in a u32" mess. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21soc: fsl: qe: add cpm_muram_free_addr() helperRasmus Villemoes
Add a helper that takes a virtual address rather than the muram offset. This will be used in a couple of places to avoid having to store both the offset and the virtual address, as well as removing NULL checks from the callers. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21soc: fsl: qe: make cpm_muram_offset take a const void* argumentRasmus Villemoes
Allow passing const-qualified pointers without requiring a cast in the caller. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15net: mscc: ocelot: configure watermarks using devlink-sbVladimir Oltean
Using devlink-sb, we can configure 12/16 (the important 75%) of the switch's controlling watermarks for congestion drops, and we can monitor 50% of the watermark occupancies (we can monitor the reservation watermarks, but not the sharing watermarks, which are exposed as pool sizes). The following definitions can be made: SB_BUF=0 # The devlink-sb for frame buffers SB_REF=1 # The devlink-sb for frame references POOL_ING=0 # The pool for ingress traffic. Both devlink-sb instances # have one of these. POOL_EGR=1 # The pool for egress traffic. Both devlink-sb instances # have one of these. Editing the hardware watermarks is done in the following way: BUF_xxxx_I is accessed when sb=$SB_BUF and pool=$POOL_ING REF_xxxx_I is accessed when sb=$SB_REF and pool=$POOL_ING BUF_xxxx_E is accessed when sb=$SB_BUF and pool=$POOL_EGR REF_xxxx_E is accessed when sb=$SB_REF and pool=$POOL_EGR Configuring the sharing watermarks for COL_SHR(dp=0) is done implicitly by modifying the corresponding pool size. By default, the pool size has maximum size, so this can be skipped. devlink sb pool set pci/0000:00:00.5 sb $SB_BUF pool $POOL_ING \ size 129840 thtype static Since by default there is no buffer reservation, the above command has maxed out BUF_COL_SHR_I(dp=0). Configuring the per-port reservation watermark (P_RSRV) is done in the following way: devlink sb port pool set pci/0000:00:00.5/0 sb $SB_BUF \ pool $POOL_ING th 1000 The above command sets BUF_P_RSRV_I(port 0) to 1000 bytes. After this command, the sharing watermarks are internally reconfigured with 1000 bytes less, i.e. from 129840 bytes to 128840 bytes. Configuring the per-port-tc reservation watermarks (Q_RSRV) is done in the following way: for tc in {0..7}; do devlink sb tc bind set pci/0000:00:00.5/0 sb 0 tc $tc \ type ingress pool $POOL_ING \ th 3000 done The above command sets BUF_Q_RSRV_I(port 0, tc 0..7) to 3000 bytes. The sharing watermarks are again reconfigured with 24000 bytes less. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15net: mscc: ocelot: register devlink portsVladimir Oltean
Add devlink integration into the mscc_ocelot switchdev driver. All physical ports (i.e. the unused ones as well) except the CPU port module at ocelot->num_phys_ports are registered with devlink, and that requires keeping the devlink_port structure outside struct ocelot_port_private, since the latter has a 1:1 mapping with a struct net_device (which does not exist for unused ports). Since we use devlink_port_type_eth_set to link the devlink port to the net_device, we can as well remove the .ndo_get_phys_port_name and .ndo_get_port_parent_id implementations, since devlink takes care of retrieving the port name and number automatically, once .ndo_get_devlink_port is implemented. Note that the felix DSA driver is already integrated with devlink by default, since that is a thing that the DSA core takes care of. This is the reason why these devlink stubs were put in ocelot_net.c and not in the common library. It is also the reason why ocelot::devlink is a pointer and not a full structure embedded inside struct ocelot: because the mscc_ocelot driver allocates that by itself (as the container of struct ocelot, in fact), but in the case of felix, it is DSA who allocates the devlink, and felix just propagates the pointer towards struct ocelot. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15net: mscc: ocelot: export NUM_TC constant from felix to common switch libVladimir Oltean
We should be moving anything that isn't DSA-specific or SoC-specific out of the felix DSA driver, and into the common mscc_ocelot switch library. The number of traffic classes is one of the aspects that is common between all ocelot switches, so it belongs in the library. This patch also makes seville use 8 TX queues, and therefore enables prioritization via the QOS_CLASS field in the NPI injection header. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15net: mscc: ocelot: add ops for decoding watermark threshold and occupancyVladimir Oltean
We'll need to read back the watermark thresholds and occupancy from hardware (for devlink-sb integration), not only to write them as we did so far in ocelot_port_set_maxlen. So introduce 2 new functions in struct ocelot_ops, similar to wm_enc, and implement them for the 3 supported mscc_ocelot switches. Remove the INUSE and MAXUSE unpacking helpers for the QSYS_RES_STAT register, because that doesn't scale with the number of switches that mscc_ocelot supports now. They have different bit widths for the watermarks, and we need function pointers to abstract that difference away. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15net: mscc: ocelot: auto-detect packet buffer size and number of frame referencesVladimir Oltean
Instead of reading these values from the reference manual and writing them down into the driver, it appears that the hardware gives us the option of detecting them dynamically. The number of frame references corresponds to what the reference manual notes, however it seems that the frame buffers are reported as slightly less than the books would indicate. On VSC9959 (Felix), the books say it should have 128KB of packet buffer, but the registers indicate only 129840 bytes (126.79 KB). Also, the unit of measurement for FREECNT from the documentation of all these devices is incorrect (taken from an older generation). This was confirmed by Younes Leroul from Microchip support. Not having anything better to do with these values at the moment* (this will change soon), let's just print them. *The frame buffer size is, in fact, used to calculate the tail dropping watermarks. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14riscv: cleanup Canaan Kendryte K210 sysctl driverDamien Le Moal
Introduce the header file include/soc/canaan/k210-sysctl.h to have a common definition of the Canaan Kendryte K210 SoC system controller registers. Simplify the k210 system controller driver code by removing unused register bits definition. The MAINTAINERS file is updated, adding the entry "CANAAN/KENDRYTE K210 SOC SYSTEM CONTROLLER DRIVER" with myself listed as maintainer for this driver. This is a preparatory patch for introducing the K210 clock driver. No functional changes are introduced. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-11net: switchdev: remove the transaction structure from port attributesVladimir Oltean
Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07soc: qcom: rpmh: Remove serialization of TCS commandsLina Iyer
Requests sent to RPMH can be sent as fire-n-forget or response required, with the latter ensuring the command has been completed by the hardware accelerator. Commands in a request with tcs_cmd::wait set, would ensure that those select commands are sent as response required, even though the actual TCS request may be fire-n-forget. Also, commands with .wait flag were also guaranteed to be complete before the following command in the TCS is sent. This means that the next command of the same request blocked until the current request is completed. This could mean waiting for a voltage to settle or series of NOCs be configured before the next command is sent. But drivers using this feature have never cared about the serialization aspect. By not enforcing the serialization we can allow the hardware to run in parallel improving the performance. Let's clarify the usage of this member in the tcs_cmd structure to mean only completion and not serialization. This should also improve the performance of bus requests where changes could happen in parallel. Also, CPU resume from deep idle may see benefits from certain wake requests. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Link: https://lore.kernel.org/r/1610008770-13891-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-05include/soc: remove headers for EZChip NPSVineet Gupta
NPS platform has been removed from ARC port and there are no in-tree user of it now . So RIP ! Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-01-05memory: tegra124-emc: Make driver modularDmitry Osipenko
Add modularization support to the Tegra124 EMC driver, which now can be compiled as a loadable kernel module. Note that EMC clock must be registered at clk-init time, otherwise PLLM will be disabled as unused clock at boot time if EMC driver is compiled as a module. Hence add a prepare/complete callbacks. similarly to what is done for the Tegra20/30 EMC drivers. Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201228154920.18846-2-digetx@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-12-16Merge tag 'arm-soc-drivers-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...
2020-12-15Merge tag 'pm-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update cpufreq (core and drivers), cpuidle (polling state implementation and the PSCI driver), the OPP (operating performance points) framework, devfreq (core and drivers), the power capping RAPL (Running Average Power Limit) driver, the Energy Model support, the generic power domains (genpd) framework, the ACPI device power management, the core system-wide suspend code and power management utilities. Specifics: - Use local_clock() instead of jiffies in the cpufreq statistics to improve accuracy (Viresh Kumar). - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq drivers (Viresh Kumar). - Clean up the cpufreq core, the intel_pstate driver and the schedutil cpufreq governor (Rafael Wysocki). - Fix up error code paths in the sti-cpufreq and mediatek cpufreq drivers (Yangtao Li, Qinglang Miao). - Fix cpufreq_online() to return error codes instead of success (0) in all cases when it fails (Wang ShaoBo). - Add mt8167 support to the mediatek cpufreq driver and blacklist mt8516 in the cpufreq-dt-platdev driver (Fabien Parent). - Modify the tegra194 cpufreq driver to always return values from the frequency table as the current frequency and clean up that driver (Sumit Gupta, Jon Hunter). - Modify the arm_scmi cpufreq driver to allow it to discover the power scale present in the performance protocol and provide this information to the Energy Model (Lukasz Luba). - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali Rohár). - Clean up the CPPC cpufreq driver (Ionela Voinescu). - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd Bergmann). - Rework the poling interval selection for the polling state in cpuidle (Mel Gorman). - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver (Ulf Hansson). - Modify the OPP framework to support empty (node-less) OPP tables in DT for passing dependency information (Nicola Mazzucato). - Fix potential lockdep issue in the OPP core and clean up the OPP core (Viresh Kumar). - Modify dev_pm_opp_put_regulators() to accept a NULL argument and update its users accordingly (Viresh Kumar). - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke). - Add support for governor feature flags to devfreq, make devfreq sysfs file permissions depend on the governor and clean up the devfreq core (Chanwoo Choi). - Clean up the tegra20 devfreq driver and deprecate it to allow another driver based on EMC_STAT to be used instead of it (Dmitry Osipenko). - Add interconnect support to the tegra30 devfreq driver, allow it to take the interconnect and OPP information from DT and clean it up (Dmitry Osipenko). - Add interconnect support to the exynos-bus devfreq driver along with interconnect properties documentation (Sylwester Nawrocki). - Add suport for AMD Fam17h and Fam19h processors to the RAPL power capping driver (Victor Ding, Kim Phillips). - Fix handling of overly long constraint names in the powercap framework (Lukasz Luba). - Fix the wakeup configuration handling for bridges in the ACPI device power management core (Rafael Wysocki). - Add support for using an abstract scale for power units in the Energy Model (EM) and document it (Lukasz Luba). - Add em_cpu_energy() micro-optimization to the EM (Pavankumar Kondeti). - Modify the generic power domains (genpd) framwework to support suspend-to-idle (Ulf Hansson). - Fix creation of debugfs nodes in genpd (Thierry Strudel). - Clean up genpd (Lina Iyer). - Clean up the core system-wide suspend code and make it print driver flags for devices with debug enabled (Alex Shi, Patrice Chotard, Chen Yu). - Modify the ACPI system reboot code to make it prepare for system power off to avoid confusing the platform firmware (Kai-Heng Feng). - Update the pm-graph (multiple changes, mostly usability-related) and cpupower (online and offline CPU information support) PM utilities (Todd Brandt, Brahadambal Srinivasan)" * tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits) cpufreq: Fix cpufreq_online() return value on errors cpufreq: Fix up several kerneldoc comments cpufreq: stats: Use local_clock() instead of jiffies cpufreq: schedutil: Simplify sugov_update_next_freq() cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate() PM: domains: create debugfs nodes when adding power domains opp: of: Allow empty opp-table with opp-shared dt-bindings: opp: Allow empty OPP tables media: venus: dev_pm_opp_put_*() accepts NULL argument drm/panfrost: dev_pm_opp_put_*() accepts NULL argument drm/lima: dev_pm_opp_put_*() accepts NULL argument PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table opp: Don't create an OPP table from dev_pm_opp_get_opp_table() cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table opp: Reduce the size of critical section in _opp_kref_release() PM / EM: Micro optimization in em_cpu_energy cpufreq: arm_scmi: Discover the power scale in performance protocol ...
2020-12-14net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process ↵Vladimir Oltean
context Currently ocelot_set_rx_mode calls ocelot_mact_learn directly, which has a very nice ocelot_mact_wait_for_completion at the end. Introduced in commit 639c1b2625af ("net: mscc: ocelot: Register poll timeout should be wall time not attempts"), this function uses readx_poll_timeout which triggers a lot of lockdep warnings and is also dangerous to use from atomic context, potentially leading to lockups and panics. Steen Hegelund added a poll timeout of 100 ms for checking the MAC table, a duration which is clearly absurd to poll in atomic context. So we need to defer the MAC table access to process context, which we do via a dynamically allocated workqueue which contains all there is to know about the MAC table operation it has to do. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201212191612.222019-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05net: mscc: ocelot: fix dropping of unknown IPv4 multicast on SevilleVladimir Oltean
The current assumption is that the felix DSA driver has flooding knobs per traffic class, while ocelot switchdev has a single flooding knob. This was correct for felix VSC9959 and ocelot VSC7514, but with the introduction of seville VSC9953, we see a switch driven by felix.c which has a single flooding knob. So it is clear that we must do what should have been done from the beginning, which is not to overwrite the configuration done by ocelot.c in felix, but instead to teach the common ocelot library about the differences in our switches, and set up the flooding PGIDs centrally. The effect that the bogus iteration through FELIX_NUM_TC has upon seville is quite dramatic. ANA_FLOODING is located at 0x00b548, and ANA_FLOODING_IPMC is located at 0x00b54c. So the bogus iteration will actually overwrite ANA_FLOODING_IPMC when attempting to write ANA_FLOODING[1]. There is no ANA_FLOODING[1] in sevile, just ANA_FLOODING. And when ANA_FLOODING_IPMC is overwritten with a bogus value, the effect is that ANA_FLOODING_IPMC gets the value of 0x0003CF7D: MC6_DATA = 61, MC6_CTRL = 61, MC4_DATA = 60, MC4_CTRL = 0. Because MC4_CTRL is zero, this means that IPv4 multicast control packets are not flooded, but dropped. An invalid configuration, and this is how the issue was actually spotted. Reported-by: Eldar Gasanov <eldargasanov2@gmail.com> Reported-by: Maxim Kochetkov <fido_max@inbox.ru> Tested-by: Eldar Gasanov <eldargasanov2@gmail.com> Fixes: 84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953 switch") Fixes: 3c7b51bd39b2 ("net: dsa: felix: allow flooding for all traffic classes") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201204175416.1445937-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-26memory: tegra: Correct stub of devm_tegra_memory_controller_get()Dmitry Osipenko
Correct typo in a stub of devm_tegra_memory_controller_get() to fix a non-ARM kernel compile-testing. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201111011456.7875-2-digetx@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>