summaryrefslogtreecommitdiff
path: root/include/sound/hda_i915.h
AgeCommit message (Collapse)Author
2018-07-17ALSA: hda: Make audio component support more genericTakashi Iwai
This is the final step for more generic support of DRM audio component. The generic audio component code is now moved to its own file, and the symbols are renamed from snd_hac_i915_* to snd_hdac_acomp_*, respectively. The generic code is enabled via the new kconfig, CONFIG_SND_HDA_COMPONENT, while CONFIG_SND_HDA_I915 is kept as the super-class. Along with the split, three new callbacks are added to audio_ops: pin2port is for providing the conversion between the pin number and the widget id, and master_bind/master_unbin are called at binding / unbinding the master component, respectively. All these are optional, but used in i915 implementation and also other later implementations. A note about the new snd_hdac_acomp_init() function: there is a slight difference between this and the old snd_hdac_i915_init(). The latter (still) synchronizes with the master component binding, i.e. it assures that the relevant DRM component gets bound when it returns, or gives a negative error. Meanwhile the new function doesn't synchronize but just leaves as is. It's the responsibility by the caller's side to synchronize, or the caller may accept the asynchronous binding on the fly. v1->v2: Fix missing NULL check in master_bind/unbind Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-17ALSA: hda/i915: Associate audio component with devresTakashi Iwai
The HD-audio i915 binding code contains a single pointer, hdac_acomp, for allowing the access to audio component from the master bind/unbind callbacks. This was needed because the callbacks pass only the device pointer and we can't guarantee the object type assigned to the drvdata (which is free for each controller driver implementation). And this implementation will be a problem if we support multiple components for different DRM drivers, not only i915. As a solution, allocate the audio component object via devres and associate it with the given device, so that the component callbacks can refer to it via devres_find(). The removal of the object is still done half-manually via devres_destroy() to make the code consistent (although it may work without the explicit call). Also, the snd_hda_i915_register_notifier() had the reference to hdac_acomp as well. In this patch, the corresponding code is removed by passing hdac_bus object to the function, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-17drm/i915: Split audio component to a generic typeTakashi Iwai
For allowing other drivers to use the DRM audio component, rename the i915_audio_component_* with drm_audio_component_*, and split the generic part into drm_audio_component.h. The i915 specific stuff remains in struct i915_audio_component, which contains drm_audio_component as the base. The license of drm_audio_component.h is kept to MIT as same as the the original i915_component.h. This is a preliminary change for further development, and no functional changes by this patch itself, merely code-split and renames. v1->v2: Use SPDX for drm_audio_component.h, fix remaining i915 argument in drm_audio_component.h Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22drm/i915/dp: DP audio API changes for MSTPandiyan, Dhinakaran
DP MST provides the capability to send multiple video and audio streams through a single port. This requires the API's between i915 and audio drivers to distinguish between multiple audio capable displays that can be connected to a port. Currently only the port identity is shared in the APIs. This patch adds support for MST with an additional parameter 'int pipe'. The existing parameter 'port' does not change it's meaning. pipe = MST : display pipe that the stream originates from Non-MST : -1 Affected APIs: struct i915_audio_component_ops - int (*sync_audio_rate)(struct device *, int port, int rate); + int (*sync_audio_rate)(struct device *, int port, int pipe, + int rate); - int (*get_eld)(struct device *, int port, bool *enabled, - unsigned char *buf, int max_bytes); + int (*get_eld)(struct device *, int port, int pipe, + bool *enabled, unsigned char *buf, int max_bytes); struct i915_audio_component_audio_ops - void (*pin_eld_notify)(void *audio_ptr, int port); + void (*pin_eld_notify)(void *audio_ptr, int port, int pipe); This patch makes dummy changes in the audio drivers (thanks Libin) for build to succeed. The audio side drivers will send the right 'pipe' values for MST in patches that will follow. v2: Renamed the new API parameter from 'dev_id' to 'pipe'. (Jim, Ville) Included Asoc driver API compatibility changes from Jeeja. Added WARN_ON() for invalid pipe in get_saved_encoder(). (Takashi) Added comment for av_enc_map[] definition. (Takashi) v3: Fixed logic error introduced while renaming 'dev_id' as 'pipe' (Ville) Renamed get_saved_encoder() to get_saved_enc() to reduce line length v4: Rebased. Parameter check for pipe < -1 values in get_saved_enc() (Ville) Switched to for_each_pipe() in get_saved_enc() (Ville) Renamed 'pipe' to 'dev_id' in audio side code (Takashi) v5: Included a comment for the dev_id arg. (Libin) Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1474488168-2343-1-git-send-email-dhinakaran.pandiyan@intel.com
2016-04-26Merge branch 'for-linus' into for-nextTakashi Iwai
For taking back the recent change of HDA HDMI fixes for i915 HSW/BDW. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-26ALSA: hda - Update BCLK also at hotplug for i915 HSW/BDWTakashi Iwai
The recent bug report suggests that BCLK setup for i915 HSW/BDW needs to be updated at each HDMI hotplug, not only at initialization and resume. That is, we need to update HSW_EM4 and HSW_EM5 registers at ELD notification, too. Otherwise the HDMI audio may be out of sync and played in a wrong pitch. However, the HDA codec driver has no access to the controller registers, and currently the code managing these registers is in hda_intel.c, i.e. local to the controller driver. For allowing the explicit BCLK update from the codec driver, as in this patch, the former haswell_set_bclk() in hda_intel.c is moved to hdac_i915.c and exposed as snd_hdac_i915_set_bclk(). This is called from both the HDA controller driver and intel_pin_eld_notify() in HDMI codec driver. Along with this change, snd_hdac_get_display_clk() gets dropped as it's no longer used. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91410 Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-28ALSA: hda - Add the pin / port mapping on Intel ILK and VLVTakashi Iwai
Intel IronLake and ValleyView platforms have different HDMI widget pin and digital port mapping from other newer ones. The recent ones (HSW+) have NID 0x05 to 0x07 for port B to port D, while these chips have NID 0x04 to 0x06. For adapting this mapping, pass the codec object instead of the bus object to snd_hdac_sync_audio_rate() and snd_hdac_acomp_get_eld() so that they can check the codec ID and calculate the mapping properly. The changes in the HDMI codec driver side will follow in the later patch. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-10ALSA: hda - Move audio component accesses to hdac_i915.cTakashi Iwai
A couple of i915_audio_component ops have been added and accessed directly from patch_hdmi.c. Ideally all these should be factored out into hdac_i915.c. This patch does it, adds two new helper functions for setting N/CTS and fetching ELD bytes. One bonus is that the hackish widget vs port mapping is also moved to hdac_i915.c, so that it can be fixed / enhanced more cleanly. Reviewed-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-02ALSA: hda - Fix missing inline for dummy snd_hdac_set_codec_wakeup()Takashi Iwai
This seems overlooked. Fixes: 98d8fc6c5d36 ('ALSA: hda - Move hda_i915.c from sound/pci/hda to sound/hda') Cc: <stable@vger.kernel.org> # v4.2+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-02ALSA: hda - allow codecs to access the i915 pin/ELD callbackDavid Henningsson
This lets the interested codec be notified when an i915 pin/ELD event happens. [tiwai: Fixed a trivial build error for CONFIG_SND_HDA_I915=n] Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-20ALSA: hda - Move hda_i915.c from sound/pci/hda to sound/hdaMengdong Lin
The file is moved to hda core and renamed to hdac_i915.c, so can be used by both legacy HDA driver and new Skylake audio driver. - Add snd_hdac_ prefix to the public APIs. - The i915 audio component is moved to core bus and dynamically allocated. - A static pointer hdac_acomp is used to help bind/unbind callbacks to get this component, because the sound card's private_data is used by the azx chip pointer, which is a legacy structure. It could be removed if private _data changes to some core structure which can be extended to find the bus. - snd_hdac_get_display_clk() is added to get the display core clock for HSW/BDW. - haswell_set_bclk() is moved to hda_intel.c because it needs to write the controller registers EM4/EM5, and only legacy HD-A needs it for HSW/BDW. - Move definition of HSW/BDW-specific registers EM4/EM5 to hda_register.h and rename them to HSW_EM4/HSW_EM5, because other HD-A controllers have different layout for the extended mode registers. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>