| Age | Commit message (Collapse) | Author |
|---|
|
Add an indicator to the rxrpc_tx_data tracepoint to indicate what triggered
the transmission of a particular packet. At this point, it's only normal
transmission and retransmission, plus the tracepoint is also used to record
loss injection, but in a future patch, TLP-induced (re-)transmission will
also be a thing.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Don't allocate an rxrpc_txbuf struct for an ACK transmission. There's now
no need as the memory to hold the ACK content is allocated with a page frag
allocator. The allocation and freeing of a txbuf is just unnecessary
overhead.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Display the userStatus field from the Rx packet header in the rxrpc_rx_ack
trace line. This is used for flow control purposes by FS.StoreData-type
kafs RPC calls.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adjust the rxrpc_rtt_rx tracepoint in the following ways:
(1) Display the collected RTT sample in the rxrpc_rtt_rx trace.
(2) Move the division of srtt by 8 to the TP_printk() rather doing it
before invoking the trace point.
(3) Display the min_rtt value.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Store the serial number set on a DATA packet at the point of transmission
in the rxrpc_txqueue struct and when an ACK is received, match the
reference number in the ACK by trawling the txqueue rather than sharing an
RTT table with ACK RTT. This can be done as part of Tx queue rotation.
This means we have a lot more RTT samples available and is faster to search
with all the serial numbers packed together into a few cachelines rather
than being hung off different txbufs.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-25-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the change in the structure of the transmission buffer to store
buffers in bunches of 32 or 64 (BITS_PER_LONG) we can place sets of
per-buffer flags into the rxrpc_tx_queue struct rather than storing them in
rxrpc_tx_buf, thereby vastly increasing efficiency when assessing the SACK
table in an ACK packet.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-24-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adjust some of the names of fields and constants to make them look a bit
more like the TCP congestion symbol names, such as flight_size -> in_flight
and congest_mode to ca_state.
Move the persistent congestion-related fields from the rxrpc_ack_summary
struct into the rxrpc_call struct rather than copying them out and back in
again. The rxrpc_congest tracepoint can fetch them from the call struct.
Rename the counters for soft acks and nacks to have an 's' on the front to
reflect the softness, e.g. nr_acks -> nr_sacks.
Make fields counting numbers of packets or numbers of acks u16 rather than
u8 to allow for windows of up to 8192 DATA packets in flight in future.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-23-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the call->acks_first_seq variable (which holds ack.firstPacket from
the latest ACK packet and indicates the sequence number of the first ack
slot in the SACK table) with call->acks_hard_ack which will hold the
highest sequence hard ACK'd. This is 1 less than call->acks_first_seq, but
it fits in the same schema as the other tracking variables which hold the
sequence of a packet, not one past it.
This will fix the rxrpc_congest tracepoint's calculation of SACK window
size which shows one fewer than it should - and will occasionally go to -1.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-21-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that packets are removed from the Tx queue in the rotation function
rather than being cleaned up later, call->acks_hard_ack now advances in
step with call->tx_bottom, so remove it.
Some of the places call->acks_hard_ack is used in the rxrpc tracepoints are
replaced by call->acks_first_seq instead as that's the peer's reported idea
of the hard-ACK point.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-20-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to scan the buffers in the transmission queue occasionally when
processing ACKs, but the transmission queue is currently a linked list of
transmission buffers which, when we eventually expand the Tx window to 8192
packets will be very slow to walk.
Instead, pull the fields we need to examine a lot (last sent time,
retransmitted flag) into a new struct rxrpc_txqueue and make each one hold
an array of 32 or 64 packets.
The transmission queue is then a list of these structs, each pointing to a
contiguous set of packets. Scanning is then a lot faster as the flags and
timestamps are concentrated in the CPU dcache.
The transmission timestamps are stored as a number of microseconds from a
base ktime to reduce memory requirements. This should be fine provided we
manage to transmit an entire buffer within an hour.
This will make implementing RACK-TLP [RFC8985] easier as it will be less
costly to scan the transmission buffers.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-19-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Starvation can happen in the rxrpc I/O thread because it goes back to the
top of the I/O loop after it does any one thing without trying to give any
other connection or call CPU time. Also, because it processes one call
packet at a time, it tries to do the retransmission loop after each ACK
without checking to see if there are other ACKs already in the queue that
can update the SACK state.
Fix this by:
(1) Add a received-packet queue on each call.
(2) Distribute packets from the master Rx queue to the individual call,
conn and error queues and 'poking' calls to add them to the attend
queue first thing in the I/O thread.
(3) Go through all the attention-seeking connections and calls before
going back to the top of the I/O thread. Each queue is extracted as a
whole and then gone through so that new additions to insert themselves
into the queue.
(4) Make the call event handler go through all the packets currently on
the call's rx_queue before transmitting and retransmitting DATA
packets.
(5) Drop the skb argument from the call event handler as this is now
replaced with the rx_queue. Instead, keep track of whether we
received a packet or an ACK for the tests that used to rely on that.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-14-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a tracepoint to be called right before packets are transmitted for the
first time that shows variable values that are pertinent to how many
subpackets will be added to a jumbo DATA packet.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-13-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement path-MTU probing (along the lines of RFC8899) by padding some of
the PING ACKs we send. PING ACKs get their own individual responses quite
apart from the acking of data (though, as ACKs, they fulfil that role
also).
The probing concentrates on packet sizes that correspond how many
subpackets can be stuffed inside a jumbo packet as jumbo DATA packets are
just aggregations of individual DATA packets and can be split easily for
retransmission purposes.
If we want to perform probing, we advertise this by setting the maximum
number of jumbo subpackets to 0 in the ack trailer when we send an ACK and
see if the peer is also advertising the service. This is interpreted by
non-supporting Rx stacks as an indication that jumbo packets aren't
supported.
The MTU sizes advertised in the ACK trailer AF_RXRPC transmits are pegged
at a maximum of 1444 unless pmtud is supported by both sides.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-10-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set the REQUEST-ACK flag on the DATA packet we're about to send if we're
about to stall transmission because the app layer isn't keeping up
supplying us with data to transmit.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-8-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up the generation of the header flags when building packet headers
for transmission:
(1) Assemble the flags in a local variable rather than in the txb->flags.
(2) Do the flags masking and JUMBO-PACKET setting in one bit of code for
both the main header and the jumbo headers.
(3) Generate the REQUEST-ACK flag afresh each time. There's a possibility
we might want to do jumbo retransmission packets in future.
(4) Pass the local flags variable to the rxrpc_tx_data tracepoint rather
than the combination of the txb flags and the wire header flags (the
latter belong only to the first subpacket).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the handling of a connection abort that we've received. Though the
abort is at the connection level, it needs propagating to the calls on that
connection. Whilst the propagation bit is performed, the calls aren't then
woken up to go and process their termination, and as no further input is
forthcoming, they just hang.
Also add some tracing for the logging of connection aborts.
Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the order of the scheme_idx and target_idx arguments in TP_ARGS is
reversed, they are stored in the trace record in reverse.
Link: https://lkml.kernel.org/r/20241115182023.43118-1-sj@kernel.org
Link: https://patch.msgid.link/20241112154828.40307-1-akinobu.mita@gmail.com
Fixes: c603c630b509 ("mm/damon/core: add a tracepoint for damos apply target regions")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In cases where we want a stable way to observe/trace
cap_capable (e.g. protection from inlining and API updates)
add a tracepoint that passes:
- The credentials used
- The user namespace of the resource being accessed
- The user namespace in which the credential provides the
capability to access the targeted resource
- The capability to check for
- The return value of the check
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Link: https://lore.kernel.org/r/20241204155911.1817092-1-linux@jordanrome.com
Signed-off-by: Serge Hallyn <sergeh@kernel.org>
|
|
Kickstart 6.14 cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- nfs/localio: fix for a memory corruption in nfs_local_read_done
- Revert "nfs: don't reuse partially completed requests in
nfs_lock_and_join_requests"
- nfsv4:
- ignore SB_RDONLY when mounting nfs
- Fix a use-after-free problem in open()
- sunrpc:
- clear XPRT_SOCK_UPD_TIMEOUT when reseting the transport
- timeout and cancel TLS handshake with -ETIMEDOUT
- fix one UAF issue caused by sunrpc kernel tcp socket
- Fix a hang in TLS sock_close if sk_write_pending
- pNFS/blocklayout: Fix device registration issues
Features and cleanups:
- localio cleanups from Mike Snitzer
- Clean up refcounting on the nfs version modules
- __counted_by() annotations
- nfs: make processes that are waiting for an I/O lock killable"
* tag 'nfs-for-6.13-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
fs/nfs/io: make nfs_start_io_*() killable
nfs/blocklayout: Limit repeat device registration on failure
nfs/blocklayout: Don't attempt unregister for invalid block device
sunrpc: fix one UAF issue caused by sunrpc kernel tcp socket
SUNRPC: timeout and cancel TLS handshake with -ETIMEDOUT
sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport
nfs: ignore SB_RDONLY when mounting nfs
Revert "nfs: don't reuse partially completed requests in nfs_lock_and_join_requests"
Revert "fs: nfs: fix missing refcnt by replacing folio_set_private by folio_attach_private"
nfs/localio: must clear res.replen in nfs_local_read_done
NFSv4.0: Fix a use-after-free problem in the asynchronous open()
NFSv4.0: Fix the wake up of the next waiter in nfs_release_seqid()
SUNRPC: Fix a hang in TLS sock_close if sk_write_pending
sunrpc: remove newlines from tracepoints
nfs: Annotate struct pnfs_commit_array with __counted_by()
nfs/localio: eliminate need for nfs_local_fsync_work forward declaration
nfs/localio: remove extra indirect nfs_to call to check {read,write}_iter
nfs/localio: eliminate unnecessary kref in nfs_local_fsync_ctx
nfs/localio: remove redundant suid/sgid handling
NFS: Implement get_nfs_version()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rust trace event support from Steven Rostedt:
"Allow Rust code to have trace events
Trace events is a popular way to debug what is happening inside the
kernel or just to find out what is happening. Rust code is being added
to the Linux kernel but it currently does not support the tracing
infrastructure. Add support of trace events inside Rust code"
* tag 'trace-rust-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rust: jump_label: skip formatting generated file
jump_label: rust: pass a mut ptr to `static_key_count`
samples: rust: fix `rust_print` build making it a combined module
rust: add arch_static_branch
jump_label: adjust inline asm to be consistent
rust: samples: add tracepoint to Rust sample
rust: add tracepoint support
rust: add static_branch_unlikely for static_key_false
|
|
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Addition of faultable tracepoints
There's a tracepoint attached to both a system call entry and exit.
This location is known to allow page faults. The tracepoints are
called under an rcu_read_lock() which does not allow faults that can
sleep. This limits the ability of tracepoint handlers to page fault
in user space system call parameters. Now these tracepoints have been
made "faultable", allowing the callbacks to fault in user space
parameters and record them.
Note, only the infrastructure has been implemented. The consumers
(perf, ftrace, BPF) now need to have their code modified to allow
faults.
- Fix up of BPF code for the tracepoint faultable logic
- Update tracepoints to use the new static branch API
- Remove trace_*_rcuidle() variants and the SRCU protection they used
- Remove unused TRACE_EVENT_FL_FILTERED logic
- Replace strncpy() with strscpy() and memcpy()
- Use replace per_cpu_ptr(smp_processor_id()) with this_cpu_ptr()
- Fix perf events to not duplicate samples when tracing is enabled
- Replace atomic64_add_return(1, counter) with
atomic64_inc_return(counter)
- Make stack trace buffer 4K instead of PAGE_SIZE
- Remove TRACE_FLAG_IRQS_NOSUPPORT flag as it was never used
- Get the true return address for function tracer when function graph
tracer is also running.
When function_graph trace is running along with function tracer, the
parent function of the function tracer sometimes is
"return_to_handler", which is the function graph trampoline to record
the exit of the function. Use existing logic that calls into the
fgraph infrastructure to find the real return address.
- Remove (un)regfunc pointers out of tracepoint structure
- Added last minute bug fix for setting pending modules in stack
function filter.
echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter
Would cause a kernel NULL dereference.
- Minor clean ups
* tag 'trace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits)
ftrace: Fix regression with module command in stack_trace_filter
tracing: Fix function name for trampoline
ftrace: Get the true parent ip for function tracer
tracing: Remove redundant check on field->field in histograms
bpf: ensure RCU Tasks Trace GP for sleepable raw tracepoint BPF links
bpf: decouple BPF link/attach hook and BPF program sleepable semantics
bpf: put bpf_link's program when link is safe to be deallocated
tracing: Replace strncpy() with strscpy() when copying comm
tracing: Add might_fault() check in __DECLARE_TRACE_SYSCALL
tracing: Fix syscall tracepoint use-after-free
tracing: Introduce tracepoint_is_faultable()
tracing: Introduce tracepoint extended structure
tracing: Remove TRACE_FLAG_IRQS_NOSUPPORT
tracing: Replace multiple deprecated strncpy with memcpy
tracing: Make percpu stack trace buffer invariant to PAGE_SIZE
tracing: Use atomic64_inc_return() in trace_clock_counter()
trace/trace_event_perf: remove duplicate samples on the first tracepoint event
tracing/bpf: Add might_fault check to syscall probes
tracing/perf: Add might_fault check to syscall probes
tracing/ftrace: Add might_fault check to syscall probes
...
|
|
Add interfaces for user application to submit command and wait for its
completion.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-8-lizhi.hou@amd.com
|
|
The hardware mailboxes are used by the driver to submit requests to
firmware and receive the completion notices from hardware.
Initially, a management mailbox channel is up and running. The driver may
request firmware to create/destroy more channels dynamically through
management channel.
Add driver internal mailbox interfaces.
- create/destroy a mailbox channel instance
- send a message to the firmware through a specific channel
- wait for a notification from the specific channel
Co-developed-by: George Yang <George.Yang@amd.com>
Signed-off-by: George Yang <George.Yang@amd.com>
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-4-lizhi.hou@amd.com
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- improve the DMA API tracing code (Sean Anderson)
- misc cleanups (Christoph Hellwig, Sui Jingfeng)
- fix pointer abuse when finding the shared DMA pool (Geert
Uytterhoeven)
- fix a deadlock in dma-debug (Levi Yun)
* tag 'dma-mapping-6.13-2024-11-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: save base/size instead of pointer to shared DMA pool
dma-mapping: fix swapped dir/flags arguments to trace_dma_alloc_sgt_err
dma-mapping: drop unneeded includes from dma-mapping.h
dma-mapping: trace more error paths
dma-mapping: use trace_dma_alloc for dma_alloc* instead of using trace_dma_map
dma-mapping: trace dma_alloc/free direction
dma-mapping: use macros to define events in a class
dma-mapping: remove an outdated comment from dma-map-ops.h
dma-debug: remove DMA_API_DEBUG_SG
dma-debug: store a phys_addr_t in struct dma_debug_entry
dma-debug: fix a possible deadlock on radix_lock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains a new abstraction for PWM waveforms that is more
expressive that the legacy one. Compared to the old abstraction it
contains a duty_offset member instead of polarity. This new
abstraction is already used in an ADC driver merged into the iio tree.
The new API requires changes to the lowlevel drivers. For now there
are two drivers that are converted to the new API (axi-pwmgen and
stm32). Converted drivers continue to work with the old API. Drivers
not yet converted only work with the older API.
Otherwise it's the usual collection of fixes, cleanups and dt doc
updates.
This time around thanks go to Andy Shevchenko, Clark Wang, Conor
Dooley, David Lechner, Dimitri Fedrau, Frank Li, Jun Li, Kelvin Zhang,
Krzysztof Kozlowski, Nuno Sa, Shen Lichuan and Trevor Gamblin for code
contributions, testing and review"
* tag 'pwm/for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: Assume a disabled PWM to emit a constant inactive output
pwm: core: export pwm_get_state_hw()
pwm: core: use device_match_name() instead of strcmp(dev_name(...
dt-bindings: pwm: adi,axi-pwmgen: Increase #pwm-cells to 3
pwm: imx27: Use clk_bulk_*() API to simplify clock handling
pwm: imx27: Workaround of the pwm output bug when decrease the duty cycle
pwm: axi-pwmgen: Enable FORCE_ALIGN by default
pwm: axi-pwmgen: Rename 0x10 register
dt-bindings: pwm: amlogic: Document C3 PWM
pwm: axi-pwmgen: Create a dedicated function for getting driver data from a chip
pwm: atmel-tcb: Use min() macro
pwm: stm32: Fix error checking for a regmap_read() call
pwm: Add kernel doc for members added to pwm_ops recently
pwm: Reorder symbols in core.c
pwm: stm32: Implementation of the waveform callbacks
pwm: axi-pwmgen: Implementation of the waveform callbacks
pwm: Add tracing for waveform callbacks
pwm: Provide new consumer API functions for waveforms
pwm: New abstraction for PWM waveforms
pwm: Add more locking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Log and handle twp new AMD-specific MCA registers: SYND1 and SYND2
and report the Field Replaceable Unit text info reported through them
- Add support for handling variable-sized SMCA BERT records
- Add the capability for reporting vendor-specific RAS error info
without adding vendor-specific fields to struct mce
- Cleanups
* tag 'ras_core_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/mce_amd: Add support for FRU text in MCA
x86/mce/apei: Handle variable SMCA BERT record size
x86/MCE/AMD: Add support for new MCA_SYND{1,2} registers
tracing: Add __print_dynamic_array() helper
x86/mce: Add wrapper for struct mce to export vendor specific info
x86/mce/intel: Use MCG_BANKCNT_MASK instead of 0xff
x86/mce/mcelog: Use xchg() to get and clear the flags
|
|
Pull io_uring updates from Jens Axboe:
- Cleanups of the eventfd handling code, making it fully private.
- Support for sending a sync message to another ring, without having a
ring available to send a normal async message.
- Get rid of the separate unlocked hash table, unify everything around
the single locked one.
- Add support for ring resizing. It can be hard to appropriately size
the CQ ring upfront, if the application doesn't know how busy it will
be. This results in applications sizing rings for the most busy case,
which can be wasteful. With ring resizing, they can start small and
grow the ring, if needed.
- Add support for fixed wait regions, rather than needing to copy the
same wait data tons of times for each wait operation.
- Rewrite the resource node handling, which before was serialized per
ring. This caused issues with particularly fixed files, where one
file waiting on IO could hold up putting and freeing of other
unrelated files. Now each node is handled separately. New code is
much simpler too, and was a net 250 line reduction in code.
- Add support for just doing partial buffer clones, rather than always
cloning the entire buffer table.
- Series adding static NAPI support, where a specific NAPI instance is
used rather than having a list of them available that need lookup.
- Add support for mapped regions, and also convert the fixed wait
support mentioned above to that concept. This avoids doing special
mappings for various planned features, and folds the existing
registered wait into that too.
- Add support for hybrid IO polling, which is a variant of strict
IOPOLL but with an initial sleep delay to avoid spinning too early
and wasting resources on devices that aren't necessarily in the < 5
usec category wrt latencies.
- Various cleanups and little fixes.
* tag 'for-6.13/io_uring-20241118' of git://git.kernel.dk/linux: (79 commits)
io_uring/region: fix error codes after failed vmap
io_uring: restore back registered wait arguments
io_uring: add memory region registration
io_uring: introduce concept of memory regions
io_uring: temporarily disable registered waits
io_uring: disable ENTER_EXT_ARG_REG for IOPOLL
io_uring: fortify io_pin_pages with a warning
switch io_msg_ring() to CLASS(fd)
io_uring: fix invalid hybrid polling ctx leaks
io_uring/uring_cmd: fix buffer index retrieval
io_uring/rsrc: add & apply io_req_assign_buf_node()
io_uring/rsrc: remove '->ctx_ptr' of 'struct io_rsrc_node'
io_uring/rsrc: pass 'struct io_ring_ctx' reference to rsrc helpers
io_uring: avoid normal tw intermediate fallback
io_uring/napi: add static napi tracking strategy
io_uring/napi: clean up __io_napi_do_busy_loop
io_uring/napi: Use lock guards
io_uring/napi: improve __io_napi_add
io_uring/napi: fix io_napi_entry RCU accesses
io_uring/napi: protect concurrent io_napi_entry timeout accesses
...
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Use uring_cmd helper (Pavel)
- Host Memory Buffer allocation enhancements (Christoph)
- Target persistent reservation support (Guixin)
- Persistent reservation tracing (Guixen)
- NVMe 2.1 specification support (Keith)
- Rotational Meta Support (Matias, Wang, Keith)
- Volatile cache detection enhancment (Guixen)
- MD updates via Song:
- Maintainers update
- raid5 sync IO fix
- Enhance handling of faulty and blocked devices
- raid5-ppl atomic improvement
- md-bitmap fix
- Support for manually defining embedded partition tables
- Zone append fixes and cleanups
- Stop sending the queued requests in the plug list to the driver
->queue_rqs() handle in reverse order.
- Zoned write plug cleanups
- Cleanups disk stats tracking and add support for disk stats for
passthrough IO
- Add preparatory support for file system atomic writes
- Add lockdep support for queue freezing. Already found a bunch of
issues, and some fixes for that are in here. More will be coming.
- Fix race between queue stopping/quiescing and IO queueing
- ublk recovery improvements
- Fix ublk mmap for 64k pages
- Various fixes and cleanups
* tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits)
MAINTAINERS: Update git tree for mdraid subsystem
block: make struct rq_list available for !CONFIG_BLOCK
block/genhd: use seq_put_decimal_ull for diskstats decimal values
block: don't reorder requests in blk_mq_add_to_batch
block: don't reorder requests in blk_add_rq_to_plug
block: add a rq_list type
block: remove rq_list_move
virtio_blk: reverse request order in virtio_queue_rqs
nvme-pci: reverse request order in nvme_queue_rqs
btrfs: validate queue limits
block: export blk_validate_limits
nvmet: add tracing of reservation commands
nvme: parse reservation commands's action and rtype to string
nvmet: report ns's vwc not present
md/raid5: Increase r5conf.cache_name size
block: remove the ioprio field from struct request
block: remove the write_hint field from struct request
nvme: check ns's volatile write cache not present
nvme: add rotational support
nvme: use command set independent id ns if available
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Changes outside of btrfs: add io_uring command flag to track a dying
task (the rest will go via the block git tree).
User visible changes:
- wire encoded read (ioctl) to io_uring commands, this can be used on
itself, in the future this will allow 'send' to be asynchronous. As
a consequence, the encoded read ioctl can also work in non-blocking
mode
- new ioctl to wait for cleaned subvolumes, no need to use the
generic and root-only SEARCH_TREE ioctl, will be used by "btrfs
subvol sync"
- recognize different paths/symlinks for the same devices and don't
report them during rescanning, this can be observed with LVM or DM
- seeding device use case change, the sprout device (the one
capturing new writes) will not clear the read-only status of the
super block; this prevents accumulating space from deleted
snapshots
Performance improvements:
- reduce lock contention when traversing extent buffers
- reduce extent tree lock contention when searching for inline
backref
- switch from rb-trees to xarray for delayed ref tracking,
improvements due to better cache locality, branching factors and
more compact data structures
- enable extent map shrinker again (prevent memory exhaustion under
some types of IO load), reworked to run in a single worker thread
(there used to be problems causing long stalls under memory
pressure)
Core changes:
- raid-stripe-tree feature updates:
- make device replace and scrub work
- implement partial deletion of stripe extents
- new selftests
- split the config option BTRFS_DEBUG and add EXPERIMENTAL for
features that are experimental or with known problems so we don't
misuse debugging config for that
- subpage mode updates (sector < page):
- update compression implementations
- update writepage, writeback
- continued folio API conversions:
- buffered writes
- make buffered write copy one page at a time, preparatory work for
future integration with large folios, may cause performance drop
- proper locking of root item regarding starting send
- error handling improvements
- code cleanups and refactoring:
- dead code removal
- unused parameter reduction
- lockdep assertions"
* tag 'for-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (119 commits)
btrfs: send: check for read-only send root under critical section
btrfs: send: check for dead send root under critical section
btrfs: remove check for NULL fs_info at btrfs_folio_end_lock_bitmap()
btrfs: fix warning on PTR_ERR() against NULL device at btrfs_control_ioctl()
btrfs: fix a typo in btrfs_use_zone_append
btrfs: avoid superfluous calls to free_extent_map() in btrfs_encoded_read()
btrfs: simplify logic to decrement snapshot counter at btrfs_mksnapshot()
btrfs: remove hole from struct btrfs_delayed_node
btrfs: update stale comment for struct btrfs_delayed_ref_node::add_list
btrfs: add new ioctl to wait for cleaned subvolumes
btrfs: simplify range tracking in cow_file_range()
btrfs: remove conditional path allocation in btrfs_read_locked_inode()
btrfs: push cleanup into btrfs_read_locked_inode()
io_uring/cmd: let cmds to know about dying task
btrfs: add struct io_btrfs_cmd as type for io_uring_cmd_to_pdu()
btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)
btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages()
btrfs: don't sleep in btrfs_encoded_read() if IOCB_NOWAIT is set
btrfs: change btrfs_encoded_read() so that reading of extent is done by caller
btrfs: remove pointless iocb::ki_pos addition in btrfs_encoded_read()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"Various fixes for the netfs library and related infrastructure:
cachefiles:
- Fix a dentry leak in cachefiles_open_file()
- Fix incorrect length return value in
cachefiles_ondemand_fd_write_iter()
- Fix missing pos updates in cachefiles_ondemand_fd_write_iter()
- Clean up in cachefiles_commit_tmpfile()
- Fix NULL pointer dereference in object->file
- Add a memory barrier for FSCACHE_VOLUME_CREATING
netfs:
- Remove call to folio_index()
- Fix a few minor bugs in netfs_page_mkwrite()
- Remove unnecessary references to pages"
* tag 'vfs-6.13.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs/fscache: Add a memory barrier for FSCACHE_VOLUME_CREATING
cachefiles: Fix NULL pointer dereference in object->file
cachefiles: Clean up in cachefiles_commit_tmpfile()
cachefiles: Fix missing pos updates in cachefiles_ondemand_fd_write_iter()
cachefiles: Fix incorrect length return value in cachefiles_ondemand_fd_write_iter()
netfs: Remove unnecessary references to pages
netfs: Fix a few minor bugs in netfs_page_mkwrite()
netfs: Remove call to folio_index()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Fixup and improve NLM and kNFSD file lock callbacks
Last year both GFS2 and OCFS2 had some work done to make their
locking more robust when exported over NFS. Unfortunately, part of
that work caused both NLM (for NFS v3 exports) and kNFSD (for
NFSv4.1+ exports) to no longer send lock notifications to clients
This in itself is not a huge problem because most NFS clients will
still poll the server in order to acquire a conflicted lock
It's important for NLM and kNFSD that they do not block their
kernel threads inside filesystem's file_lock implementations
because that can produce deadlocks. We used to make sure of this by
only trusting that posix_lock_file() can correctly handle blocking
lock calls asynchronously, so the lock managers would only setup
their file_lock requests for async callbacks if the filesystem did
not define its own lock() file operation
However, when GFS2 and OCFS2 grew the capability to correctly
handle blocking lock requests asynchronously, they started
signalling this behavior with EXPORT_OP_ASYNC_LOCK, and the check
for also trusting posix_lock_file() was inadvertently dropped, so
now most filesystems no longer produce lock notifications when
exported over NFS
Fix this by using an fop_flag which greatly simplifies the problem
and grooms the way for future uses by both filesystems and lock
managers alike
- Add a sysctl to delete the dentry when a file is removed instead of
making it a negative dentry
Commit 681ce8623567 ("vfs: Delete the associated dentry when
deleting a file") introduced an unconditional deletion of the
associated dentry when a file is removed. However, this led to
performance regressions in specific benchmarks, such as
ilebench.sum_operations/s, prompting a revert in commit
4a4be1ad3a6e ("Revert "vfs: Delete the associated dentry when
deleting a file""). This reintroduces the concept conditionally
through a sysctl
- Expand the statmount() system call:
* Report the filesystem subtype in a new fs_subtype field to
e.g., report fuse filesystem subtypes
* Report the superblock source in a new sb_source field
* Add a new way to return filesystem specific mount options in an
option array that returns filesystem specific mount options
separated by zero bytes and unescaped. This allows caller's to
retrieve filesystem specific mount options and immediately pass
them to e.g., fsconfig() without having to unescape or split
them
* Report security (LSM) specific mount options in a separate
security option array. We don't lump them together with
filesystem specific mount options as security mount options are
generic and most users aren't interested in them
The format is the same as for the filesystem specific mount
option array
- Support relative paths in fsconfig()'s FSCONFIG_SET_STRING command
- Optimize acl_permission_check() to avoid costly {g,u}id ownership
checks if possible
- Use smp_mb__after_spinlock() to avoid full smp_mb() in evict()
- Add synchronous wakeup support for ep_poll_callback.
Currently, epoll only uses wake_up() to wake up task. But sometimes
there are epoll users which want to use the synchronous wakeup flag
to give a hint to the scheduler, e.g., the Android binder driver.
So add a wake_up_sync() define, and use wake_up_sync() when sync is
true in ep_poll_callback()
Fixes:
- Fix kernel documentation for inode_insert5() and iget5_locked()
- Annotate racy epoll check on file->f_ep
- Make F_DUPFD_QUERY associative
- Avoid filename buffer overrun in initramfs
- Don't let statmount() return empty strings
- Add a cond_resched() to dump_user_range() to avoid hogging the CPU
- Don't query the device logical blocksize multiple times for hfsplus
- Make filemap_read() check that the offset is positive or zero
Cleanups:
- Various typo fixes
- Cleanup wbc_attach_fdatawrite_inode()
- Add __releases annotation to wbc_attach_and_unlock_inode()
- Add hugetlbfs tracepoints
- Fix various vfs kernel doc parameters
- Remove obsolete TODO comment from io_cancel()
- Convert wbc_account_cgroup_owner() to take a folio
- Fix comments for BANDWITH_INTERVAL and wb_domain_writeout_add()
- Reorder struct posix_acl to save 8 bytes
- Annotate struct posix_acl with __counted_by()
- Replace one-element array with flexible array member in freevxfs
- Use idiomatic atomic64_inc_return() in alloc_mnt_ns()"
* tag 'vfs-6.13.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
statmount: retrieve security mount options
vfs: make evict() use smp_mb__after_spinlock instead of smp_mb
statmount: add flag to retrieve unescaped options
fs: add the ability for statmount() to report the sb_source
writeback: wbc_attach_fdatawrite_inode out of line
writeback: add a __releases annoation to wbc_attach_and_unlock_inode
fs: add the ability for statmount() to report the fs_subtype
fs: don't let statmount return empty strings
fs:aio: Remove TODO comment suggesting hash or array usage in io_cancel()
hfsplus: don't query the device logical block size multiple times
freevxfs: Replace one-element array with flexible array member
fs: optimize acl_permission_check()
initramfs: avoid filename buffer overrun
fs/writeback: convert wbc_account_cgroup_owner to take a folio
acl: Annotate struct posix_acl with __counted_by()
acl: Realign struct posix_acl to save 8 bytes
epoll: Add synchronous wakeup support for ep_poll_callback
coredump: add cond_resched() to dump_user_range
mm/page-writeback.c: Fix comment of wb_domain_writeout_add()
mm/page-writeback.c: Update comment for BANDWIDTH_INTERVAL
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs multigrain timestamps from Christian Brauner:
"This is another try at implementing multigrain timestamps. This time
with significant help from the timekeeping maintainers to reduce the
performance impact.
Thomas provided a base branch that contains the required timekeeping
interfaces for the VFS. It serves as the base for the multi-grain
timestamp work:
- Multigrain timestamps allow the kernel to use fine-grained
timestamps when an inode's attributes is being actively observed
via ->getattr(). With this support, it's possible for a file to get
a fine-grained timestamp, and another modified after it to get a
coarse-grained stamp that is earlier than the fine-grained time. If
this happens then the files can appear to have been modified in
reverse order, which breaks VFS ordering guarantees.
To prevent this, a floor value is maintained for multigrain
timestamps. Whenever a fine-grained timestamp is handed out, record
it, and when later coarse-grained stamps are handed out, ensure
they are not earlier than that value. If the coarse-grained
timestamp is earlier than the fine-grained floor, return the floor
value instead.
The timekeeper changes add a static singleton atomic64_t into
timekeeper.c that is used to keep track of the latest fine-grained
time ever handed out. This is tracked as a monotonic ktime_t value
to ensure that it isn't affected by clock jumps. Because it is
updated at different times than the rest of the timekeeper object,
the floor value is managed independently of the timekeeper via a
cmpxchg() operation, and sits on its own cacheline.
Two new public timekeeper interfaces are added:
(1) ktime_get_coarse_real_ts64_mg() fills a timespec64 with the
later of the coarse-grained clock and the floor time
(2) ktime_get_real_ts64_mg() gets the fine-grained clock value,
and tries to swap it into the floor. A timespec64 is filled
with the result.
- The VFS has always used coarse-grained timestamps when updating the
ctime and mtime after a change. This has the benefit of allowing
filesystems to optimize away a lot metadata updates, down to around
1 per jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting
via NFSv3, which relies on timestamps to validate caches. A lot of
changes can happen in a jiffy, so timestamps aren't sufficient to
help the client decide when to invalidate the cache. Even with
NFSv4, a lot of exported filesystems don't properly support a
change attribute and are subject to the same problems with
timestamp granularity. Other applications have similar issues with
timestamps (e.g backup applications).
If we were to always use fine-grained timestamps, that would
improve the situation, but that becomes rather expensive, as the
underlying filesystem would have to log a lot more metadata
updates.
This adds a way to only use fine-grained timestamps when they are
being actively queried. Use the (unused) top bit in
inode->i_ctime_nsec as a flag that indicates whether the current
timestamps have been queried via stat() or the like. When it's set,
we allow the kernel to use a fine-grained timestamp iff it's
necessary to make the ctime show a different value.
This solves the problem of being able to distinguish the timestamp
between updates, but introduces a new problem: it's now possible
for a file being changed to get a fine-grained timestamp. A file
that is altered just a bit later can then get a coarse-grained one
that appears older than the earlier fine-grained time. This
violates timestamp ordering guarantees.
This is where the earlier mentioned timkeeping interfaces help. A
global monotonic atomic64_t value is kept that acts as a timestamp
floor. When we go to stamp a file, we first get the latter of the
current floor value and the current coarse-grained time. If the
inode ctime hasn't been queried then we just attempt to stamp it
with that value.
If it has been queried, then first see whether the current coarse
time is later than the existing ctime. If it is, then we accept
that value. If it isn't, then we get a fine-grained time and try to
swap that into the global floor. Whether that succeeds or fails, we
take the resulting floor time, convert it to realtime and try to
swap that into the ctime.
We take the result of the ctime swap whether it succeeds or fails,
since either is just as valid.
Filesystems can opt into this by setting the FS_MGTIME fstype flag.
Others should be unaffected (other than being subject to the same
floor value as multigrain filesystems)"
* tag 'vfs-6.13.mgtime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: reduce pointer chasing in is_mgtime() test
tmpfs: add support for multigrain timestamps
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
Documentation: add a new file documenting multigrain timestamps
fs: add percpu counters for significant multigrain timestamp events
fs: tracepoints around multigrain timestamp events
fs: handle delegated timestamps in setattr_copy_mgtime
timekeeping: Add percpu counter for tracking floor swap events
timekeeping: Add interfaces for handling timestamps with a floor value
fs: have setattr_copy handle multigrain timestamps appropriately
fs: add infrastructure for multigrain timestamps
|
|
Add iocsr and mmio memory read and write simulation to the kernel. When
the VM accesses the device address space through iocsr instructions or
mmio, it does not need to return to the qemu user mode but can directly
completes the access in the kernel mode.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The request ioprio is only initialized from the first attached bio,
so requests without a bio already never set it. Directly use the
bio field instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241112170050.1612998-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since 7d6be67cfdd4 ("mm: mmap_lock: replace get_memcg_path_buf() with
on-stack buffer") we use trace_mmap_lock_reg()/unreg() only to maintain an
atomic reg_refcount which is checked to avoid performing
get_mm_memcg_path() in case none of the tracepoints using it is enabled.
This can be achieved directly by putting all the work needed for the
tracepoint behind the trace_mmap_lock_##type##_enabled(), as suggested by
Documentation/trace/tracepoints.rst and with the following advantages:
- uses the tracepoint's static key instead of evaluating a branch
- the check tracepoint specific, not shared by all of them
- we can get rid of trace_mmap_lock_reg()/unreg() completely
Thus use the trace_..._enabled() check and remove unnecessary code.
Link: https://lkml.kernel.org/r/20241105113456.95066-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a tracepoint to rxrpc to trace the proposal of an abort. The abort is
performed asynchronously by the I/O thread.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/726356.1730898045@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The names for the members of struct btrfs_fs_info related to the extent
map shrinker are a bit too long, so rename them to be shorter by replacing
the "extent_map_" prefix with the "em_" prefix.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that the extent map shrinker can only be run by a single task (as a
work queue item) there is no need to keep the progress of the shrinker
protected by a spinlock and passing the progress to trace events as
parameters. So remove the lock and simplify the arguments for the trace
events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_try_tree_write_lock() has been unused since commit
50b21d7a066f ("btrfs: submit a writeback bio per extent_buffer").
Remove it as we don't need it anymore.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we track qgroup extent records in a xarray we don't need to have
a "bytenr" field in struct btrfs_qgroup_extent_record, since we can get
it from the index of the record in the xarray.
So remove the field and grab the bytenr from either the index key or any
other place where it's available (delayed refs). This reduces the size of
struct btrfs_qgroup_extent_record from 40 bytes down to 32 bytes, meaning
that we now can store 128 instances of this structure instead of 102 per
4K page.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This tracepoint gives visibility on how often the flushing of memcg stats
occurs and contains info on whether it was forced, skipped, and the value
of stats updated. It can help with understanding how readers are affected
by having to perform the flush, and the effectiveness of the flush by
inspecting the number of stats updated. Paired with the recently added
tracepoints for tracing rstat updates, it can also help show correlation
where stats exceed thresholds frequently.
Link: https://lkml.kernel.org/r/20241029021106.25587-3-inwardvessel@gmail.com
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Tracepoint strings don't require newlines (and in fact, they are
undesirable).
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can and netfilter.
Things are slowing down quite a bit, mostly driver fixes here. No
known ongoing investigations.
Current release - new code bugs:
- eth: ti: am65-cpsw:
- fix multi queue Rx on J7
- fix warning in am65_cpsw_nuss_remove_rx_chns()
Previous releases - regressions:
- mptcp: do not require admin perm to list endpoints, got missed in a
refactoring
- mptcp: use sock_kfree_s instead of kfree
Previous releases - always broken:
- sctp: properly validate chunk size in sctp_sf_ootb() fix OOB access
- virtio_net: make RSS interact properly with queue number
- can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
- can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing
configuration when switching CAN modes
Misc:
- revert earlier hns3 fixes, they were ignoring IOMMU abstractions
and need to be reworked
- can: {cc770,sja1000}_isa: allow building on x86_64"
* tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error path
net/smc: do not leave a dangling sk pointer in __smc_create()
rxrpc: Fix missing locking causing hanging calls
net/smc: Fix lookup of netdev by using ib_device_get_netdev()
net: arc: rockchip: fix emac mdio node support
net: arc: fix the device for dma_map_single/dma_unmap_single
virtio_net: Update rss when set queue
virtio_net: Sync rss config to device when virtnet_probe
virtio_net: Add hash_key_length check
virtio_net: Support dynamic rss indirection table size
netfilter: nf_tables: wait for rcu grace period on net_device removal
net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case
net: vertexcom: mse102x: Fix possible double free of TX skb
mptcp: use sock_kfree_s instead of kfree
mptcp: no admin perm to list endpoints
net: phy: ti: add PHY_RST_AFTER_CLK_EN flag
net: ethernet: ti: am65-cpsw: fix warning in am65_cpsw_nuss_remove_rx_chns()
net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7
net: hns3: fix kernel crash when uninstalling driver
Revert "Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'"
...
|
|
If a call gets aborted (e.g. because kafs saw a signal) between it being
queued for connection and the I/O thread picking up the call, the abort
will be prioritised over the connection and it will be removed from
local->new_client_calls by rxrpc_disconnect_client_call() without a lock
being held. This may cause other calls on the list to disappear if a race
occurs.
Fix this by taking the client_call_lock when removing a call from whatever
list its ->wait_link happens to be on.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Fixes: 9d35d880e0e4 ("rxrpc: Move client call connection to the I/O thread")
Link: https://patch.msgid.link/726660.1730898202@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
reclaim_folio_list uses a dummy reclaim_stat and is not being used. To
know the memory stat, add a new trace event. This is useful how how many
pages are not reclaimed or why.
This is an example:
mm_vmscan_reclaim_pages: nid=0 nr_scanned=112 nr_reclaimed=112 nr_dirty=0 nr_writeback=0 nr_congested=0 nr_immediate=0 nr_activate_anon=0 nr_activate_file=0 nr_ref_keep=0 nr_unmap_fail=0
Currently reclaim_folio_list is only called by reclaim_pages, and
reclaim_pages is used by damon and madvise. In the latest Android,
reclaim_pages is also used by shmem to reclaim all pages in a
address_space.
[jaewon31.kim@samsung.com: use sc.nr_scanned rather than new counting]
Link: https://lkml.kernel.org/r/20241016143227.961162-1-jaewon31.kim@samsung.com
Link: https://lkml.kernel.org/r/20241011124928.1224813-1-jaewon31.kim@samsung.com
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jaewon Kim <jaewon31.kim@samsung.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The memcg stats are maintained in rstat infrastructure which provides very
fast updates side and reasonable read side. However memcg added plethora
of stats and made the read side, which is cgroup rstat flush, very slow.
To solve that, threshold was added in the memcg stats read side i.e. no
need to flush the stats if updates are within the threshold.
This threshold based improvement worked for sometime but more stats were
added to memcg and also the read codepath was getting triggered in the
performance sensitive paths which made threshold based ratelimiting
ineffective. We need more visibility into the hot and cold stats i.e.
stats with a lot of updates. Let's add trace to get that visibility.
[shakeel.butt@linux.dev: use unsigned long type for memcg_rstat_events, per Yosry]
Link: https://lkml.kernel.org/r/20241015213721.3804209-1-shakeel.butt@linux.dev
Link: https://lkml.kernel.org/r/20241010003550.3695245-1-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: JP Kobryn <inwardvessel@gmail.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
