| Age | Commit message (Collapse) | Author |
|---|
|
* for-6.15/io_uring-epoll-wait:
io_uring/epoll: add support for IORING_OP_EPOLL_WAIT
io_uring/epoll: remove CONFIG_EPOLL guards
eventpoll: add epoll_sendevents() helper
eventpoll: abstract out ep_try_send_events() helper
eventpoll: abstract out parameter sanity checking
|
|
* for-6.15/io_uring-rx-zc: (80 commits)
io_uring/zcrx: add selftest case for recvzc with read limit
io_uring/zcrx: add a read limit to recvzc requests
io_uring: add missing IORING_MAP_OFF_ZCRX_REGION in io_uring_mmap
io_uring: Rename KConfig to Kconfig
io_uring/zcrx: fix leaks on failed registration
io_uring/zcrx: recheck ifq on shutdown
io_uring/zcrx: add selftest
net: add documentation for io_uring zcrx
io_uring/zcrx: add copy fallback
io_uring/zcrx: throttle receive requests
io_uring/zcrx: set pp memory provider for an rx queue
io_uring/zcrx: add io_recvzc request
io_uring/zcrx: dma-map area for the device
io_uring/zcrx: implement zerocopy receive pp memory provider
io_uring/zcrx: grab a net device
io_uring/zcrx: add io_zcrx_area
io_uring/zcrx: add interface queue and refill queue
net: add helpers for setting a memory provider on an rx queue
net: page_pool: add memory provider helpers
net: prepare for non devmem TCP memory providers
...
|
|
* for-6.15/io_uring: (80 commits)
io_uring: introduce io_cache_free() helper
io_uring/rsrc: skip NULL file/buffer checks in io_free_rsrc_node()
io_uring/rsrc: avoid NULL node check on io_sqe_buffer_register() failure
io_uring/rsrc: call io_free_node() on io_sqe_buffer_register() failure
io_uring/rsrc: free io_rsrc_node using kfree()
io_uring/rsrc: split out io_free_node() helper
io_uring/rsrc: include io_uring_types.h in rsrc.h
ublk: don't cast registered buffer index to int
io_uring/nop: use io_find_buf_node()
io_uring/rsrc: declare io_find_buf_node() in header file
io_uring/ublk: report error when unregister operation fails
io_uring: convert cmd_to_io_kiocb() macro to function
io_uring/uring_cmd: specify io_uring_cmd_import_fixed() pointer type
io_uring/rsrc: use rq_data_dir() to compute bvec dir
selftests: ublk: add ublk zero copy test
selftests: ublk: add file backed ublk
selftests: ublk: add kernel selftests for ublk
io_uring: cache nodes and mapped buffers
ublk: zc register/unregister bvec
io_uring: add support for kernel registered bvecs
...
|
|
PCIe r6.1, sec 6.30.1.1, describes a "Vendor ID", a "Data Object Type" and
"Next Index" as the fields in the DOE Discovery Response Data Object. The
DOE driver currently uses both the terms 'type' and 'prot' for the second
element.
Rename all uses of the DOE Discovery Response Data Object to use 'type' as
the second element of the object header, instead of type/prot as it
currently is.
Link: https://lore.kernel.org/r/20250306075211.1855177-2-alistair@alistair23.me
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
"int" was misspelled as "init" the code comments in the bits.h and
const.h files. Fix the typo.
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Similar to compute queue reset, flag SDMA queue reset capabilities to
user space for safe testing.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some tools like systemd's jounral need to retrieve the exit and cgroup
information after a process has already been reaped. This can e.g.,
happen when retrieving a pidfd via SCM_PIDFD or SCM_PEERPIDFD.
Link: https://lore.kernel.org/r/20250305-work-pidfs-kill_on_last_close-v3-6-c8c3d8361705@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
First 6.15 material:
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
* tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (128 commits)
wifi: iwlwifi: remove mld/roc.c
wifi: mac80211: refactor populating mesh related fields in sinfo
wifi: cfg80211: reorg sinfo structure elements for mesh
wifi: iwlwifi: Fix spelling mistake "Increate" -> "Increase"
wifi: iwlwifi: add Debug Host Command APIs
wifi: iwlwifi: add IWL_MAX_NUM_IGTKS macro
wifi: iwlwifi: add OMI bandwidth reduction APIs
wifi: iwlwifi: remove mvm prefix from iwl_mvm_d3_end_notif
wifi: iwlwifi: remember if the UATS table was read successfully
wifi: iwlwifi: export iwl_get_lari_config_bitmap
wifi: iwlwifi: add support for external 32 KHz clock
wifi: iwlwifi: mld: add a debug level for EHT prints
wifi: iwlwifi: mld: add a debug level for PTP prints
wifi: iwlwifi: remove mvm prefix from iwl_mvm_esr_mode_notif
wifi: iwlwifi: use 0xff instead of 0xffffffff for invalid
wifi: iwlwifi: location api cleanup
wifi: cfg80211: expose update timestamp to drivers
wifi: mac80211: add ieee80211_iter_chan_contexts_mtx
wifi: mac80211: fix integer overflow in hwmp_route_info_get()
wifi: mac80211: Fix possible integer promotion issue
...
====================
Link: https://patch.msgid.link/20250304125605.127914-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The description of @tstamp parameter has one line that starts at the
beginning. This moves such line to the description, which is not the
intent here.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/8238bed1c0375e6b389a8cafe1ad99fdeb1cb1f2.1740387599.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Since commit 05c1280a2bcf ("netdev_features: convert NETIF_F_NETNS_LOCAL to
dev->netns_local"), there is no way to see if the netns_immutable property
s set on a device. Let's add a netlink attribute to advertise it.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The types are used by tools/testing/selftests/vDSO/parse_vdso.c.
To be able to build the vDSO selftests without a libc dependency,
add the types to the kernels own UAPI headers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://refspecs.linuxfoundation.org/LSB_5.0.0/LSB-Core-generic/LSB-Core-generic/symversion.html#VERDEFEXTS
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-6-28e14e031ed8@linutronix.de
|
|
The type is used by tools/testing/selftests/vDSO/parse_vdso.c.
To be able to build the vDSO selftests without a libc dependency,
add the type to the kernels own UAPI headers. As documented by elf(5).
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-5-28e14e031ed8@linutronix.de
|
|
The definitions are used by tools/testing/selftests/vDSO/parse_vdso.c.
To be able to build the vDSO selftests without a libc dependency,
add the definitions to the kernels own UAPI headers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://docs.oracle.com/cd/E19683-01/816-1386/chapter6-80869/index.html
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-4-28e14e031ed8@linutronix.de
|
|
The definition is used by tools/testing/selftests/vDSO/parse_vdso.c.
To be able to build the vDSO selftests without a libc dependency,
add the define to the kernels own UAPI headers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://refspecs.linuxbase.org/LSB_5.0.0/LSB-Core-generic/LSB-Core-generic/libc-ddefs.html
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-3-28e14e031ed8@linutronix.de
|
|
The definition is used by tools/testing/selftests/vDSO/parse_vdso.c.
To be able to build the vDSO selftests without a libc dependency,
add the definition to the kernels own UAPI headers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://refspecs.linuxfoundation.org/elf/gabi4+/ch4.symtab.html
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-2-28e14e031ed8@linutronix.de
|
|
The in-tree ublk driver doesn't need DMA alignment limit because there
is one data copy between request pages and the userspace buffer.
However, ublk is going to support zero copy, then DMA alignment limit
is required, because same IO buffer is forwarded to backend which may
have specific buffer DMA alignment limit, so the limit has to be exposed
from the frontend driver to client application.
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250227103707.2640014-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Implement support for ROI as described in UVC 1.5:
4.2.2.1.20 Digital Region of Interest (ROI) Control
ROI control is implemented using V4L2 control API as
two UVC-specific controls:
V4L2_CID_UVC_REGION_OF_INTEREST_RECT and
V4L2_CID_UVC_REGION_OF_INTEREST_AUTO.
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Yunke Cao <yunkec@google.com>
Tested-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-16-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fix control names: "Of" -> "of", "Controls" -> "Ctrls"]
|
|
Add the capability of retrieving the min and max values of a
compound control.
[Ricardo: Added static to v4l2_ctrl_type_op_(maximum|minimum) proto]
[Ricardo: Fix documentation]
Signed-off-by: Yunke Cao <yunkec@google.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-2-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fix small alignment checkpatch warning]
|
|
Add p_rect to struct v4l2_ext_control with basic support in
v4l2-ctrls.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-1-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
In preparation for memtostr*() checking that its source is marked as
nonstring, annotate the device strings accordingly using the new UAPI
alias for the "nonstring" attribute.
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
In order to annotate byte arrays in UAPI that are not C strings (i.e.
they may not be NUL terminated), the "nonstring" attribute is needed.
However, we can't expose this to userspace as it is compiler version
specific.
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
This patch reverts 'commit c32ee3d9abd2("bitops: avoid integer overflow in
GENMASK(_ULL)")'.
The code generation can be shrink by over 1KB by reverting this commit.
Originally the commit claimed that clang would emit warnings using the
implementation at that time.
The patch was applied and tested against numerous compilers, including
gcc-13, gcc-12, gcc-11 cross-compiler, clang-17, clang-18 and clang-19.
Various warning levels were set (-W=0, -W=1, -W=2) and CONFIG_WERROR
disabled to complete the compilation. The results show that no compilation
errors or warnings were generated due to the patch.
The results of code size reduction are summarized in the following table.
The code size changes for clang are all zero across different versions,
so they're not listed in the table.
For NR_CPUS=64 on x86_64.
----------------------------------------------
| | gcc-13 | gcc-12 | gcc-11 |
----------------------------------------------
| old | 22438085 | 22453915 | 22302033 |
----------------------------------------------
| new | 22436816 | 22452913 | 22300826 |
----------------------------------------------
| new - old | -1269 | -1002 | -1207 |
----------------------------------------------
For NR_CPUS=1024 on x86_64.
----------------------------------------------
| | gcc-13 | gcc-12 | gcc-11 |
----------------------------------------------
| old | 22493682 | 22509812 | 22357661 |
----------------------------------------------
| new | 22493230 | 22509487 | 22357250 |
----------------------------------------------
| new - old | -452 | -325 | -411 |
----------------------------------------------
For arm64 architecture, gcc cross-compiler was used and QEMU was
utilized to execute a VM for a CPU-heavy workload to ensure no
side effects and that functionalities remained correct. The test
even demonstrated a positive result in terms of code size reduction:
* Before: 31660668
* After: 31658724
* Difference (After - Before): -1944
An analysis of multiple functions compiled with gcc-13 on x86_64 was
performed. In summary, the patch elimates one negation in almost
every use case. However, negative effects may occur in some cases,
such as the generation of additional "mov" instruction or increased
register usage. The use of "~_UL(0) << (l)" may even result in the
allocations of "%r*" registers instead of "%e*" registers (which are
32-bit registers) because the compiler cannot assume that the higher
bits are zero.
Yury:
We limit GENMASK() usage with the const_true(l > h) condition, and
most of users just call it with constant parameters. For those, the
actual implementation of the macro doesn't matter, and since it
triggered clang warnings back then, it was reasonable to workaround
the warnings on the kernel side.
Now that some find_bit() functions call GENMASK() with runtime
parameters (although the const_true() condition holds), this ended up
hurting the generated code, as I Hsin discovered. This is especially
bad because it hurts small_const_nbits() optimization, where people are
most concerned about generated code quality. So, revert it to the
original version for good.
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Provide new operations for the user to request mapping an active request
to an io uring instance's buf_table. The user has to provide the index
it wants to install the buffer.
A reference count is taken on the request to ensure it can't be
completed while it is active in a ring's buf_table.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250227223916.143006-6-kbusch@meta.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Recently, in case of Cilium, we run into users on Azure who require to use
tunneling for east/west traffic due to hitting IPAM API limits for Kubernetes
Pods if they would have gone with publicly routable IPs for Pods. In case
of tunneling, Cilium supports the option of vxlan or geneve. In order to
RSS spread flows among remote CPUs both derive a source port hash via
udp_flow_src_port() which takes the inner packet's skb->hash into account.
For clusters with many nodes, this can then hit a new limitation [0]: Today,
the Azure networking stack supports 1M total flows (500k inbound and 500k
outbound) for a VM. [...] Once this limit is hit, other connections are
dropped. [...] Each flow is distinguished by a 5-tuple (protocol, local IP
address, remote IP address, local port, and remote port) information. [...]
For vxlan and geneve, this can create a massive amount of UDP flows which
then run into the limits if stale flows are not evicted fast enough. One
option to mitigate this for vxlan is to narrow the source port range via
IFLA_VXLAN_PORT_RANGE while still being able to benefit from RSS. However,
geneve currently does not have this option and it spreads traffic across
the full source port range of [1, USHRT_MAX]. To overcome this limitation
also for geneve, add an equivalent IFLA_GENEVE_PORT_RANGE setting for users.
Note that struct geneve_config before/after still remains at 2 cachelines
on x86-64. The low/high members of struct ifla_geneve_port_range (which is
uapi exposed) are of type __be16. While they would be perfectly fine to be
of __u16 type, the consensus was that it would be good to be consistent
with the existing struct ifla_vxlan_port_range from a uapi consumer PoV.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://learn.microsoft.com/en-us/azure/virtual-network/virtual-machine-network-throughput [0]
Link: https://patch.msgid.link/20250226182030.89440-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If queue size is less than minimum, clamp it to minimum to prevent
underflow when writing queue mqd.
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc5).
Conflicts:
drivers/net/ethernet/cadence/macb_main.c
fa52f15c745c ("net: cadence: macb: Synchronize stats calculations")
75696dd0fd72 ("net: cadence: macb: Convert to get_stats64")
https://lore.kernel.org/20250224125848.68ee63e5@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/intel/ice/ice_sriov.c
79990cf5e7ad ("ice: Fix deinitializing VF in error path")
a203163274a4 ("ice: simplify VF MSI-X managing")
net/ipv4/tcp.c
18912c520674 ("tcp: devmem: don't write truncated dmabuf CMSGs to userspace")
297d389e9e5b ("net: prefix devmem specific helpers")
net/mptcp/subflow.c
8668860b0ad3 ("mptcp: reset when MPTCP opts are dropped after join")
c3349a22c200 ("mptcp: consolidate subflow cleanup")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge mainline fixes into 6.15 branch, as upcoming patches depend on
fixes that went into the 6.14 mainline branch.
* io_uring-6.14:
io_uring/net: save msg_control for compat
io_uring/rw: clean up mshot forced sync mode
io_uring/rw: move ki_complete init into prep
io_uring/rw: don't directly use ki_complete
io_uring/rw: forbid multishot async reads
io_uring/rsrc: remove unused constants
io_uring: fix spelling error in uapi io_uring.h
io_uring: prevent opcode speculation
io-wq: backoff when retrying worker creation
|
|
Yong-Hao Zou mentioned that linux was not strict as other OS in 3WHS,
for flows using TCP TS option (RFC 7323)
As hinted by an old comment in tcp_check_req(),
we can check the TSEcr value in the incoming packet corresponds
to one of the SYNACK TSval values we have sent.
In this patch, I record the oldest and most recent values
that SYNACK packets have used.
Send a challenge ACK if we receive a TSEcr outside
of this range, and increase a new SNMP counter.
nstat -az | grep TSEcrRejected
TcpExtTSEcrRejected 0 0.0
Due to TCP fastopen implementation, do not apply yet these checks
for fastopen flows.
v2: No longer use req->num_timeout, but treq->snt_tsval_first
to detect when first SYNACK is prepared. This means
we make sure to not send an initial zero TSval.
Make sure MPTCP and TCP selftests are passing.
Change MIB name to TcpExtTSEcrRejected
v1: https://lore.kernel.org/netdev/CADVnQykD8i4ArpSZaPKaoNxLJ2if2ts9m4As+=Jvdkrgx1qMHw@mail.gmail.com/T/
Reported-by: Yong-Hao Zou <yonghaoz1994@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250225171048.3105061-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"Fixes to TCP socket identification, documentation, and tests"
* tag 'landlock-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add binaries to .gitignore
selftests/landlock: Test that MPTCP actions are not restricted
selftests/landlock: Test TCP accesses with protocol=IPPROTO_TCP
landlock: Fix non-TCP sockets restriction
landlock: Minor typo and grammar fixes in IPC scoping documentation
landlock: Fix grammar error
selftests/landlock: Enable the new CONFIG_AF_UNIX_OOB
|
|
KVM's treatment of the ID registers that describe the implementation
(MIDR, REVIDR, and AIDR) is interesting, to say the least. On the
userspace-facing end of it, KVM presents the values of the boot CPU on
all vCPUs and treats them as invariant. On the guest side of things KVM
presents the hardware values of the local CPU, which can change during
CPU migration in a big-little system.
While one may call this fragile, there is at least some degree of
predictability around it. For example, if a VMM wanted to present
big-little to a guest, it could affine vCPUs accordingly to the correct
clusters.
All of this makes a giant mess out of adding support for making these
implementation ID registers writable. Avoid breaking the rather subtle
ABI around the old way of doing things by requiring opt-in from
userspace to make the registers writable.
When the cap is enabled, allow userspace to set MIDR, REVIDR, and AIDR
to any non-reserved value and present those values consistently across
all vCPUs.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
[oliver: changelog, capability]
Link: https://lore.kernel.org/r/20250225005401.679536-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add an additional type of symmetric RSS hash type: OR-XOR.
The "Symmetric-OR-XOR" algorithm transforms the input as follows:
(SRC_IP | DST_IP, SRC_IP ^ DST_IP, SRC_PORT | DST_PORT, SRC_PORT ^ DST_PORT)
Change 'cap_rss_sym_xor_supported' to 'supported_input_xfrm', a bitmap
of supported RXH_XFRM_* types.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250224174416.499070-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
- The Open Virtual Network (OVN) routing netlink handler uses ID 84
- Will also add to `/etc/iproute2/rt_protos` once this is accepted
- For more information: https://github.com/ovn-org/ovn
Signed-off-by: Jonas Gottlieb <jonas.gottlieb@stackit.cloud>
Link: https://patch.msgid.link/Z7w_e7cfA3xmHDa6@SIT-SDELAP4051.int.lidl.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The way how the virtual interface is called inside the batman-adv source
code is not consistent. The genl headers call it meshif and the rest of the
code calls is (mostly) softif.
The genl definitions cannot be touched because they are part of the UAPI.
But the rest of the batman-adv code can be touched to have a consistent
name again.
The bulk of the renaming was done using
sed -i -e 's/soft\(-\|\_\| \|\)i\([nf]\)/mesh\1i\2/g' \
-e 's/SOFT\(-\|\_\| \|\)I\([NF]\)/MESH\1I\2/g'
and then it was adjusted slightly when proofreading the changes.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Upcoming changes will add a USB host (and later gadget) driver for the
MCTP-over-USB protocol. Add a header that provides common definitions
for protocol support: the packet header format and a few framing
definitions. Add a define for the MCTP class code, as per
https://usb.org/defined-class-codes.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250221-dev-mctp-usb-v3-1-3353030fe9cc@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an attribute that allows matching on DSCP with a mask. Matching on
DSCP with a mask is needed in deployments where users encode path
information into certain bits of the DSCP field.
Temporarily set the type of the attribute to 'NLA_REJECT' while support
is being added.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20250220080525.831924-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-02-20
We've added 19 non-merge commits during the last 8 day(s) which contain
a total of 35 files changed, 1126 insertions(+), 53 deletions(-).
The main changes are:
1) Add TCP_RTO_MAX_MS support to bpf_set/getsockopt, from Jason Xing
2) Add network TX timestamping support to BPF sock_ops, from Jason Xing
3) Add TX metadata Launch Time support, from Song Yoong Siang
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
igc: Add launch time support to XDP ZC
igc: Refactor empty frame insertion for launch time support
net: stmmac: Add launch time support to XDP ZC
selftests/bpf: Add launch time request to xdp_hw_metadata
xsk: Add launch time hardware offload support to XDP Tx metadata
selftests/bpf: Add simple bpf tests in the tx path for timestamping feature
bpf: Support selective sampling for bpf timestamping
bpf: Add BPF_SOCK_OPS_TSTAMP_SENDMSG_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_ACK_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_HW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_SW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback
net-timestamp: Prepare for isolating two modes of SO_TIMESTAMPING
bpf: Disable unsafe helpers in TX timestamping callbacks
bpf: Prevent unsafe access to the sock fields in the BPF timestamping callback
bpf: Prepare the sock_ops ctx and call bpf prog for TX timestamping
bpf: Add networking timestamping support to bpf_get/setsockopt()
selftests/bpf: Add rto max for bpf_setsockopt test
bpf: Support TCP_RTO_MAX_MS for bpf_setsockopt
====================
Link: https://patch.msgid.link/20250221022104.386462-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Flit mode introduced in PCIe r6.0 alters how the TLP Header Log is
presented through AER and DPC Capability registers. The TLP Prefix Log
Register is not present with Flit mode, and the register becomes an
extension of the TLP Header Log (PCIe r6.1 secs 7.8.4.12 & 7.9.14.13).
Adapt pcie_read_tlp_log() and struct pcie_tlp_log to read and store the
extended TLP Header Log when the Link is in Flit mode. As the Prefix Log
and Extended TLP Header are not present at the same time, a C union can be
used.
Determining whether the error occurred while the Link was in Flit mode is a
bit complicated. In case of AER, the Advanced Error Capabilities and
Control Register directly tells whether the error was logged in Flit mode
or not (PCIe r6.1 sec 7.8.4.7). The DPC Capability (PCIe r6.1 sec 7.9.14),
unfortunately, does not contain the same information.
Unlike AER, the DPC Capability does not provide a way to discern whether
the error was logged in Flit mode (this is confirmed by PCI WG to be an
oversight in the spec). DPC will bring the Link down immediately following
an error, which makes it impossible to acquire the Flit Mode Status
directly from the Link Status 2 register because Flit Mode Status is only
set in certain Link states (PCIe r6.1 sec 7.5.3.20). As a workaround, use
the flit_mode value stored into the struct pci_bus.
Link: https://lore.kernel.org/r/20250207161836.2755-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Pull io_uring fixes from Jens Axboe:
- Series fixing an issue with multishot read on pollable files that may
return -EIOCBQUEUED from ->read_iter(). Four small patches for that,
the first one deliberately done in such a way that it'd be easy to
backport
- Remove some dead constant definitions
- Use array_index_nospec() for opcode indexing
- Work-around for worker creation retries in the presence of signals
* tag 'io_uring-6.14-20250221' of git://git.kernel.dk/linux:
io_uring/rw: clean up mshot forced sync mode
io_uring/rw: move ki_complete init into prep
io_uring/rw: don't directly use ki_complete
io_uring/rw: forbid multishot async reads
io_uring/rsrc: remove unused constants
io_uring: fix spelling error in uapi io_uring.h
io_uring: prevent opcode speculation
io-wq: backoff when retrying worker creation
|
|
Add support for the 'eUSB2 Isochronous Endpoint Companion Descriptor'
introduced in the recent USB 2.0 specification 'USB 2.0 Double Isochronous
IN Bandwidth' ECN.
It allows embedded USB2 (eUSB2) devices to report and use higher bandwidths
for isochronous IN transfers in order to support higher camera resolutions
on the lid of laptops and tablets with minimal change to the USB2 protocol.
The motivation for expanding USB 2.0 is further clarified in an additional
Embedded USB2 version 2.0 (eUSB2v2) supplement to the USB 2.0
specification. It points out this is optimized for performance, power and
cost by using the USB 2.0 low-voltage, power efficient PHY and half-duplex
link for the asymmetric camera bandwidth needs, avoiding the costly and
complex full-duplex USB 3.x symmetric link and gigabit receivers.
eUSB2 devices that support the higher isochronous IN bandwidth and the new
descriptor can be identified by their device descriptor bcdUSB value of
0x0220
Co-developed-by: Amardeep Rai <amardeep.rai@intel.com>
Signed-off-by: Amardeep Rai <amardeep.rai@intel.com>
Signed-off-by: Kannappan R <r.kannappan@intel.com>
Co-developed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250220141339.1939448-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The define used for the version in the example diagram does not match what
is defined in enum rksip1_ext_param_buffer_version, nor the description
above it. Correct the typo to make it clear which define to use.
Fixes: e9d05e9d5db1 ("media: uapi: rkisp1-config: Add extensible params format")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Cross-merge bpf fixes after downstream PR (bpf-6.14-rc4).
Minor conflict:
kernel/bpf/btf.c
Adjacent changes:
kernel/bpf/arena.c
kernel/bpf/btf.c
kernel/bpf/syscall.c
kernel/bpf/verifier.c
mm/memory.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Extend the XDP Tx metadata framework so that user can requests launch time
hardware offload, where the Ethernet device will schedule the packet for
transmission at a pre-determined time called launch time. The value of
launch time is communicated from user space to Ethernet driver via
launch_time field of struct xsk_tx_metadata.
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250216093430.957880-2-yoong.siang.song@intel.com
|
|
This patch introduces a new callback in tcp_tx_timestamp() to correlate
tcp_sendmsg timestamp with timestamps from other tx timestamping
callbacks (e.g., SND/SW/ACK).
Without this patch, BPF program wouldn't know which timestamps belong
to which flow because of no socket lock protection. This new callback
is inserted in tcp_tx_timestamp() to address this issue because
tcp_tx_timestamp() still owns the same socket lock with
tcp_sendmsg_locked() in the meanwhile tcp_tx_timestamp() initializes
the timestamping related fields for the skb, especially tskey. The
tskey is the bridge to do the correlation.
For TCP, BPF program hooks the beginning of tcp_sendmsg_locked() and
then stores the sendmsg timestamp at the bpf_sk_storage, correlating
this timestamp with its tskey that are later used in other sending
timestamping callbacks.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-11-kerneljasonxing@gmail.com
|
|
Support the ACK case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_ACK_CB. This
callback will occur at the same timestamping point as the user
space's SCM_TSTAMP_ACK. The BPF program can use it to get the
same SCM_TSTAMP_ACK timestamp without modifying the user-space
application.
This patch extends txstamp_ack to two bits: 1 stands for
SO_TIMESTAMPING mode, 2 bpf extension.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-10-kerneljasonxing@gmail.com
|
|
Support hw SCM_TSTAMP_SND case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_SND_HW_CB. This
callback will occur at the same timestamping point as the user
space's hardware SCM_TSTAMP_SND. The BPF program can use it to
get the same SCM_TSTAMP_SND timestamp without modifying the
user-space application.
To avoid increasing the code complexity, replace SKBTX_HW_TSTAMP
with SKBTX_HW_TSTAMP_NOBPF instead of changing numerous callers
from driver side using SKBTX_HW_TSTAMP. The new definition of
SKBTX_HW_TSTAMP means the combination tests of socket timestamping
and bpf timestamping. After this patch, drivers can work under the
bpf timestamping.
Considering some drivers don't assign the skb with hardware
timestamp, this patch does the assignment and then BPF program
can acquire the hwstamp from skb directly.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-9-kerneljasonxing@gmail.com
|
|
Support sw SCM_TSTAMP_SND case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_SND_SW_CB. This
callback will occur at the same timestamping point as the user
space's software SCM_TSTAMP_SND. The BPF program can use it to
get the same SCM_TSTAMP_SND timestamp without modifying the
user-space application.
Based on this patch, BPF program will get the software
timestamp when the driver is ready to send the skb. In the
sebsequent patch, the hardware timestamp will be supported.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-8-kerneljasonxing@gmail.com
|
|
Support SCM_TSTAMP_SCHED case for bpf timestamping.
Add a new sock_ops callback, BPF_SOCK_OPS_TSTAMP_SCHED_CB. This
callback will occur at the same timestamping point as the user
space's SCM_TSTAMP_SCHED. The BPF program can use it to get the
same SCM_TSTAMP_SCHED timestamp without modifying the user-space
application.
A new SKBTX_BPF flag is added to mark skb_shinfo(skb)->tx_flags,
ensuring that the new BPF timestamping and the current user
space's SO_TIMESTAMPING do not interfere with each other.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-7-kerneljasonxing@gmail.com
|
|
The new SK_BPF_CB_FLAGS and new SK_BPF_CB_TX_TIMESTAMPING are
added to bpf_get/setsockopt. The later patches will implement the
BPF networking timestamping. The BPF program will use
bpf_setsockopt(SK_BPF_CB_FLAGS, SK_BPF_CB_TX_TIMESTAMPING) to
enable the BPF networking timestamping on a socket.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-2-kerneljasonxing@gmail.com
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc4).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For existing epoll event loops that can't fully convert to io_uring,
the used approach is usually to add the io_uring fd to the epoll
instance and use epoll_wait() to wait on both "legacy" and io_uring
events. While this work, it isn't optimal as:
1) epoll_wait() is pretty limited in what it can do. It does not support
partial reaping of events, or waiting on a batch of events.
2) When an io_uring ring is added to an epoll instance, it activates the
io_uring "I'm being polled" logic which slows things down.
Rather than use this approach, with EPOLL_WAIT support added to io_uring,
event loops can use the normal io_uring wait logic for everything, as
long as an epoll wait request has been armed with io_uring.
Note that IORING_OP_EPOLL_WAIT does NOT take a timeout value, as this
is an async request. Waiting on io_uring events in general has various
timeout parameters, and those are the ones that should be used when
waiting on any kind of request. If events are immediately available for
reaping, then This opcode will return those immediately. If none are
available, then it will post an async completion when they become
available.
cqe->res will contain either an error code (< 0 value) for a malformed
request, invalid epoll instance, etc. It will return a positive result
indicating how many events were reaped.
IORING_OP_EPOLL_WAIT requests may be canceled using the normal io_uring
cancelation infrastructure.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
