| Age | Commit message (Collapse) | Author |
|---|
|
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
|
|
Pull io_uring updates from Jens Axboe:
"Here are the io_uring updates queued up for 6.11.
Nothing major this time around, various minor improvements and
cleanups/fixes. This contains:
- Add bind/listen opcodes. Main motivation is to support direct
descriptors, to avoid needing a regular fd just for doing these two
operations (Gabriel)
- Probe fixes (Gabriel)
- Treat io-wq work flags as atomics. Not fixing a real issue, but may
as well and it silences a KCSAN warning (me)
- Cleanup of rsrc __set_current_state() usage (me)
- Add 64-bit for {m,f}advise operations (me)
- Improve performance of data ring messages (me)
- Fix for ring message overflow posting (Pavel)
- Fix for freezer interaction with TWA_NOTIFY_SIGNAL. Not strictly an
io_uring thing, but since TWA_NOTIFY_SIGNAL was originally added
for faster task_work signaling for io_uring, bundling it with this
pull (Pavel)
- Add Pavel as a co-maintainer
- Various cleanups (me, Thorsten)"
* tag 'for-6.11/io_uring-20240714' of git://git.kernel.dk/linux: (28 commits)
io_uring/net: check socket is valid in io_bind()/io_listen()
kernel: rerun task_work while freezing in get_signal()
io_uring/io-wq: limit retrying worker initialisation
io_uring/napi: Remove unnecessary s64 cast
io_uring/net: cleanup io_recv_finish() bundle handling
io_uring/msg_ring: fix overflow posting
MAINTAINERS: change Pavel Begunkov from io_uring reviewer to maintainer
io_uring/msg_ring: use kmem_cache_free() to free request
io_uring/msg_ring: check for dead submitter task
io_uring/msg_ring: add an alloc cache for io_kiocb entries
io_uring/msg_ring: improve handling of target CQE posting
io_uring: add io_add_aux_cqe() helper
io_uring: add remote task_work execution helper
io_uring/msg_ring: tighten requirement for remote posting
io_uring: Allocate only necessary memory in io_probe
io_uring: Fix probe of disabled operations
io_uring: Introduce IORING_OP_LISTEN
io_uring: Introduce IORING_OP_BIND
net: Split a __sys_listen helper for io_uring
net: Split a __sys_bind helper for io_uring
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pidfs updates from Christian Brauner:
"This contains work to make it possible to derive namespace file
descriptors from pidfd file descriptors.
Right now it is already possible to use a pidfd with setns() to
atomically change multiple namespaces at the same time. In other
words, it is possible to switch to the namespace context of a process
using a pidfd. There is no need to first open namespace file
descriptors via procfs.
The work included here is an extension of these abilities by allowing
to open namespace file descriptors using a pidfd. This means it is now
possible to interact with namespaces without ever touching procfs.
To this end a new set of ioctls() on pidfds is introduced covering all
supported namespace types"
* tag 'vfs-6.11.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfs: allow retrieval of namespace file descriptors
nsfs: add open_namespace()
nsproxy: add helper to go from arbitrary namespace to ns_common
nsproxy: add a cleanup helper for nsproxy
file: add take_fd() cleanup helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull namespace-fs updates from Christian Brauner:
"This adds ioctls allowing to translate PIDs between PID namespaces.
The motivating use-case comes from LXCFS which is a tiny fuse
filesystem used to virtualize various aspects of procfs. LXCFS is run
on the host. The files and directories it creates can be bind-mounted
by e.g. a container at startup and mounted over the various procfs
files the container wishes to have virtualized.
When e.g. a read request for uptime is received, LXCFS will receive
the pid of the reader. In order to virtualize the corresponding read,
LXCFS needs to know the pid of the init process of the reader's pid
namespace.
In order to do this, LXCFS first needs to fork() two helper processes.
The first helper process setns() to the readers pid namespace. The
second helper process is needed to create a process that is a proper
member of the pid namespace.
The second helper process then creates a ucred message with ucred.pid
set to 1 and sends it back to LXCFS. The kernel will translate the
ucred.pid field to the corresponding pid number in LXCFS's pid
namespace. This way LXCFS can learn the init pid number of the
reader's pid namespace and can go on to virtualize.
Since these two forks() are costly LXCFS maintains an init pid cache
that caches a given pid for a fixed amount of time. The cache is
pruned during new read requests. However, even with the cache the hit
of the two forks() is singificant when a very large number of
containers are running.
So this adds a simple set of ioctls that let's a caller translate PIDs
from and into a given PID namespace. This significantly improves
performance with a very simple change.
To protect against races pidfds can be used to check whether the
process is still valid"
* tag 'vfs-6.11.nsfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nsfs: add pid translation ioctls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount query updates from Christian Brauner:
"This contains work to extend the abilities of listmount() and
statmount() and various fixes and cleanups.
Features:
- Allow iterating through mounts via listmount() from newest to
oldest. This makes it possible for mount(8) to keep iterating the
mount table in reverse order so it gets newest mounts first.
- Relax permissions on listmount() and statmount().
It's not necessary to have capabilities in the initial namespace:
it is sufficient to have capabilities in the owning namespace of
the mount namespace we're located in to list unreachable mounts in
that namespace.
- Extend both listmount() and statmount() to list and stat mounts in
foreign mount namespaces.
Currently the only way to iterate over mount entries in mount
namespaces that aren't in the caller's mount namespace is by
crawling through /proc in order to find /proc/<pid>/mountinfo for
the relevant mount namespace.
This is both very clumsy and hugely inefficient. So extend struct
mnt_id_req with a new member that allows to specify the mount
namespace id of the mount namespace we want to look at.
Luckily internally we already have most of the infrastructure for
this so we just need to expose it to userspace. Give userspace a
way to retrieve the id of a mount namespace via statmount() and
through a new nsfs ioctl() on mount namespace file descriptor.
This comes with appropriate selftests.
- Expose mount options through statmount().
Currently if userspace wants to get mount options for a mount and
with statmount(), they still have to open /proc/<pid>/mountinfo to
parse mount options. Simply the information through statmount()
directly.
Afterwards it's possible to only rely on statmount() and
listmount() to retrieve all and more information than
/proc/<pid>/mountinfo provides.
This comes with appropriate selftests.
Fixes:
- Avoid copying to userspace under the namespace semaphore in
listmount.
Cleanups:
- Simplify the error handling in listmount by relying on our newly
added cleanup infrastructure.
- Refuse invalid mount ids early for both listmount and statmount"
* tag 'vfs-6.11.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: reject invalid last mount id early
fs: refuse mnt id requests with invalid ids early
fs: find rootfs mount of the mount namespace
fs: only copy to userspace on success in listmount()
sefltests: extend the statmount test for mount options
fs: use guard for namespace_sem in statmount()
fs: export mount options via statmount()
fs: rename show_mnt_opts -> show_vfsmnt_opts
selftests: add a test for the foreign mnt ns extensions
fs: add an ioctl to get the mnt ns id from nsfs
fs: Allow statmount() in foreign mount namespace
fs: Allow listmount() in foreign mount namespace
fs: export the mount ns id via statmount
fs: keep an index of current mount namespaces
fs: relax permissions for statmount()
listmount: allow listing in reverse order
fs: relax permissions for listmount()
fs: simplify error handling
fs: don't copy to userspace under namespace semaphore
path: add cleanup helper
|
|
This patch changes how TCA_FLOWER_KEY_ENC_FLAGS is used, so that
it is used with TCA_FLOWER_KEY_FLAGS_* flags, in the same way as
TCA_FLOWER_KEY_FLAGS is currently used.
Where TCA_FLOWER_KEY_FLAGS uses {key,mask}->control.flags, then
TCA_FLOWER_KEY_ENC_FLAGS now uses {key,mask}->enc_control.flags,
therefore {key,mask}->enc_flags is now unused.
As the generic fl_set_key_flags/fl_dump_key_flags() is used with
encap set to true, then fl_{set,dump}_key_enc_flags() is removed.
This breaks unreleased userspace API (net-next since 2024-06-04).
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-10-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define new TCA_FLOWER_KEY_FLAGS_* flags for use in struct
flow_dissector_key_control, covering the same flags as
currently exposed through TCA_FLOWER_KEY_ENC_FLAGS.
Put the new flags under FLOW_DIS_F_*. The idea is that we can
later, move the existing flags under FLOW_DIS_F_* as well.
The ynl flag names have been taken from the RFC iproute2 patch.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240713021911.1631517-4-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Redefine the flower control flags as an enum, so they are
included in BTF info.
Make the kernel-side enum a more explicit superset of
TCA_FLOWER_KEY_FLAGS_*, new flags still need to be added to
both enums, but at least the bit position only has to be
defined once.
FLOW_DIS_ENCAPSULATION is never set for mask, so it can't be
exposed to userspace in an unsupported flags mask error message,
so it will be placed one bit position above the last uAPI flag.
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Relying on position in the enum makes it subtly harder when doing merge
resolutions or backporting as it is easy to grab a patch and not notice it
is a uAPI change with a differently ordered enum. This may become a bigger
problem in next cycles when iommu_hwpt_invalidate_data_type and other
per-driver enums have patches flowing through different trees.
So lets start including constants for all the uAPI enums to make this
safer.
No functional change.
Link: https://lore.kernel.org/r/0-v1-2c06ec044924+133-iommufd_uapi_const_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Introduce a new link mode necessary for 10 MBit single-pair
connection in BroadR-Reach mode on bcm5481x PHY by Broadcom.
This new link mode, 10baseT1BRR, is known as 1BR10 in the Broadcom
terminology. Another link mode to be used is 1BR100 and it is already
present as 100baseT1, because Broadcom's 1BR100 became 100baseT1
(IEEE 802.3bw).
Signed-off-by: Kamil Horák (2N) <kamilh@axis.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240712150709.3134474-2-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-07-13
1) Support sending NAT keepalives in ESP in UDP states.
Userspace IKE daemon had to do this before, but the
kernel can better keep track of it.
From Eyal Birger.
2) Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths. Currently, IPsec crypto offload is enabled for GRO
code path only. This patchset support UDP encapsulation for the non
GRO path. From Mike Yu.
* tag 'ipsec-next-2024-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Support crypto offload for outbound IPv4 UDP-encapsulated ESP packet
xfrm: Support crypto offload for inbound IPv4 UDP-encapsulated ESP packet
xfrm: Allow UDP encapsulation in crypto offload control path
xfrm: Support crypto offload for inbound IPv6 ESP packets not in GRO path
xfrm: support sending NAT keepalives in ESP in UDP states
====================
Link: https://patch.msgid.link/20240713102416.3272997-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The need to get ELF build ID reliably is an important aspect when dealing
with profiling and stack trace symbolization, and /proc/<pid>/maps textual
representation doesn't help with this.
To get backing file's ELF build ID, application has to first resolve VMA,
then use it's start/end address range to follow a special
/proc/<pid>/map_files/<start>-<end> symlink to open the ELF file (this is
necessary because backing file might have been removed from the disk or
was already replaced with another binary in the same file path.
Such approach, beyond just adding complexity of having to do a bunch of
extra work, has extra security implications. Because application opens
underlying ELF file and needs read access to its entire contents (as far
as kernel is concerned), kernel puts additional capable() checks on
following /proc/<pid>/map_files/<start>-<end> symlink. And that makes
sense in general.
But in the case of build ID, profiler/symbolizer doesn't need the contents
of ELF file, per se. It's only build ID that is of interest, and ELF
build ID itself doesn't provide any sensitive information.
So this patch adds a way to request backing file's ELF build ID along the
rest of VMA information in the same API. User has control over whether
this piece of information is requested or not by either setting
build_id_size field to zero or non-zero maximum buffer size they provided
through build_id_addr field (which encodes user pointer as __u64 field).
This is a completely optional piece of information, and so has no
performance implications for user cases that don't care about build ID,
while improving performance and simplifying the setup for those
application that do need it.
Kernel already implements build ID fetching, which is used from BPF
subsystem. We are reusing this code here, but plan a follow up changes to
make it work better under more relaxed assumption (compared to what
existing code assumes) of being called from user process context, in which
page faults are allowed. BPF-specific implementation currently bails out
if necessary part of ELF file is not paged in, all due to extra
BPF-specific restrictions (like the need to fetch build ID in restrictive
contexts such as NMI handler).
[andrii@kernel.org: fix integer to pointer cast warning in do_procmap_query()]
Link: https://lkml.kernel.org/r/20240701174805.1897344-1-andrii@kernel.org
Link: https://lkml.kernel.org/r/20240627170900.1672542-4-andrii@kernel.org
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
/proc/<pid>/maps file is extremely useful in practice for various tasks
involving figuring out process memory layout, what files are backing any
given memory range, etc. One important class of applications that
absolutely rely on this are profilers/stack symbolizers (perf tool being
one of them). Patterns of use differ, but they generally would fall into
two categories.
In on-demand pattern, a profiler/symbolizer would normally capture stack
trace containing absolute memory addresses of some functions, and would
then use /proc/<pid>/maps file to find corresponding backing ELF files
(normally, only executable VMAs are of interest), file offsets within
them, and then continue from there to get yet more information (ELF
symbols, DWARF information) to get human-readable symbolic information.
This pattern is used by Meta's fleet-wide profiler, as one example.
In preprocessing pattern, application doesn't know the set of addresses of
interest, so it has to fetch all relevant VMAs (again, probably only
executable ones), store or cache them, then proceed with profiling and
stack trace capture. Once done, it would do symbolization based on stored
VMA information. This can happen at much later point in time. This
patterns is used by perf tool, as an example.
In either case, there are both performance and correctness requirement
involved. This address to VMA information translation has to be done as
efficiently as possible, but also not miss any VMA (especially in the case
of loading/unloading shared libraries). In practice, correctness can't be
guaranteed (due to process dying before VMA data can be captured, or
shared library being unloaded, etc), but any effort to maximize the chance
of finding the VMA is appreciated.
Unfortunately, for all the /proc/<pid>/maps file universality and
usefulness, it doesn't fit the above use cases 100%.
First, it's main purpose is to emit all VMAs sequentially, but in practice
captured addresses would fall only into a smaller subset of all process'
VMAs, mainly containing executable text. Yet, library would need to parse
most or all of the contents to find needed VMAs, as there is no way to
skip VMAs that are of no use. Efficient library can do the linear pass
and it is still relatively efficient, but it's definitely an overhead that
can be avoided, if there was a way to do more targeted querying of the
relevant VMA information.
Second, it's a text based interface, which makes its programmatic use from
applications and libraries more cumbersome and inefficient due to the need
to handle text parsing to get necessary pieces of information. The
overhead is actually payed both by kernel, formatting originally binary
VMA data into text, and then by user space application, parsing it back
into binary data for further use.
For the on-demand pattern of usage, described above, another problem when
writing generic stack trace symbolization library is an unfortunate
performance-vs-correctness tradeoff that needs to be made. Library has to
make a decision to either cache parsed contents of /proc/<pid>/maps (after
initial processing) to service future requests (if application requests to
symbolize another set of addresses (for the same process), captured at
some later time, which is typical for periodic/continuous profiling cases)
to avoid higher costs of re-parsing this file. Or it has to choose to
cache the contents in memory to speed up future requests. In the former
case, more memory is used for the cache and there is a risk of getting
stale data if application loads or unloads shared libraries, or otherwise
changed its set of VMAs somehow, e.g., through additional mmap() calls.
In the latter case, it's the performance hit that comes from re-opening
the file and re-parsing its contents all over again.
This patch aims to solve this problem by providing a new API built on top
of /proc/<pid>/maps. It's meant to address both non-selectiveness and
text nature of /proc/<pid>/maps, by giving user more control of what sort
of VMA(s) needs to be queried, and being binary-based interface eliminates
the overhead of text formatting (on kernel side) and parsing (on user
space side).
It's also designed to be extensible and forward/backward compatible by
including required struct size field, which user has to provide. We use
established copy_struct_from_user() approach to handle extensibility.
User has a choice to pick either getting VMA that covers provided address
or -ENOENT if none is found (exact, least surprising, case). Or, with an
extra query flag (PROCMAP_QUERY_COVERING_OR_NEXT_VMA), they can get either
VMA that covers the address (if there is one), or the closest next VMA
(i.e., VMA with the smallest vm_start > addr). The latter allows more
efficient use, but, given it could be a surprising behavior, requires an
explicit opt-in.
There is another query flag that is useful for some use cases.
PROCMAP_QUERY_FILE_BACKED_VMA instructs this API to only return
file-backed VMAs. Combining this with PROCMAP_QUERY_COVERING_OR_NEXT_VMA
makes it possible to efficiently iterate only file-backed VMAs of the
process, which is what profilers/symbolizers are normally interested in.
All the above querying flags can be combined with (also optional) set of
desired VMA permissions flags. This allows to, for example, iterate only
an executable subset of VMAs, which is what preprocessing pattern, used by
perf tool, would benefit from, as the assumption is that captured stack
traces would have addresses of executable code. This saves time by
skipping non-executable VMAs altogether efficienty.
All these querying flags (modifiers) are orthogonal and can be combined in
a semantically meaningful and natural way.
Basing this ioctl()-based API on top of /proc/<pid>/maps's FD makes sense
given it's querying the same set of VMA data. It's also benefitial
because permission checks for /proc/<pid>/maps is performed at open time
once, and the actual data read of text contents of /proc/<pid>/maps is
done without further permission checks. We piggyback on this pattern with
ioctl()-based API as well, as that's a desired property. Both for
performance reasons, but also for security and flexibility reasons.
Allowing application to open an FD for /proc/self/maps without any extra
capabilities, and then passing it to some sort of profiling agent through
Unix-domain socket, would allow such profiling agent to not require some
of the capabilities that are otherwise expected when opening
/proc/<pid>/maps file for *another* process. This is a desirable property
for some more restricted setups.
This new ioctl-based implementation doesn't interfere with seq_file-based
implementation of /proc/<pid>/maps textual interface, and so could be used
together or independently without paying any price for that.
Note also, that fetching VMA name (e.g., backing file path, or special
hard-coded or user-provided names) is optional just like build ID. If
user sets vma_name_size to zero, kernel code won't attempt to retrieve it,
saving resources.
Earlier versions of this patch set were adding per-VMA locking, which is
why we have a code structure that is ready for abstracting mmap_lock vs
vm_lock differences (query_vma_setup(), query_vma_teardown(), and
query_vma_find_by_addr()), but given anon_vma_name() is not yet compatible
with per-VMA locking, initial implementation sticks to using only
mmap_lock for now. It will be easy to add back per-VMA locking once all
the pieces are ready later on. Which is why we keep existing code
structure with setup/teardown/query helper functions.
[andrii@kernel.org: improve PROCMAP_QUERY's compat mode handling]
Link: https://lkml.kernel.org/r/20240701174805.1897344-2-andrii@kernel.org
Link: https://lkml.kernel.org/r/20240627170900.1672542-3-andrii@kernel.org
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.11
1. Add ParaVirt steal time support.
2. Add some VM migration enhancement.
3. Add perf kvm-stat support for loongarch.
|
|
Add a new ioctl KVM_PRE_FAULT_MEMORY in the KVM common code. It iterates on the
memory range and calls the arch-specific function. The implementation is
optional and enabled by a Kconfig symbol.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <819322b8f25971f2b9933bfa4506e618508ad782.1712785629.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Complete the pisp_be_config strcture by adding fields that even if not
written to the HW are relevant to complete the uAPI and put it in par
with the BSP driver.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The order of the members of pisp_be_tiles_config is relevant
as the driver logic assumes 'config' to be at offset 0.
Re-sort the member to match the driver's expectations.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The macro used to inspect an image format characteristic use a mixture
of capitalized and non-capitalized letters, which is rather unusual for
the Linux kernel style.
Capitalize all identifiers.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add definition and test for 32-bits image formats to the pisp_common.h
uAPI header.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Acked-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The pisp_be_config.h uAPI header file contains a bit-field definition
that uses the BIT() helper macro.
As the BIT() identifier is not defined in userspace, drop it from the
uAPI header.
Fixes: c6c49bac8770 ("media: uapi: Add Raspberry Pi PiSP Back End uAPI")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
Most likely the last "new features" pull request for v6.11 with
changes both in stack and in drivers. The big thing is the multiple
radios for wiphy feature which makes it possible to better advertise
radio capabilities to user space. mt76 enabled MLO and iwlwifi
re-enabled MLO, ath12k and rtw89 Wi-Fi 6 devices got WoWLAN support.
Major changes:
cfg80211/mac80211
* remove DEAUTH_NEED_MGD_TX_PREP flag
* multiple radios per wiphy support
mac80211_hwsim
* multi-radio wiphy support
ath12k
* DebugFS support for datapath statistics
* WCN7850: support for WoW (Wake on WLAN)
* WCN7850: device-tree bindings
ath11k
* QCA6390: device-tree bindings
iwlwifi
* mvm: re-enable Multi-Link Operation (MLO)
* aggregation (A-MSDU) optimisations
rtw89
* preparation for RTL8852BE-VT support
* WoWLAN support for WiFi 6 chips
* 36-bit PCI DMA support
mt76
* mt7925 Multi-Link Operation (MLO) support
* tag 'wireless-next-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (204 commits)
wifi: mac80211: fix AP chandef capturing in CSA
wifi: iwlwifi: correctly reference TSO page information
wifi: mt76: mt792x: fix scheduler interference in drv own process
wifi: mt76: mt7925: enabling MLO when the firmware supports it
wifi: mt76: mt7925: remove the unused mt7925_mcu_set_chan_info
wifi: mt76: mt7925: update mt7925_mac_link_bss_add for MLO
wifi: mt76: mt7925: update mt7925_mcu_bss_basic_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_set_timing for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_phy_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_rate_ctrl_tlv for MLO
wifi: mt76: mt7925: add mt7925_mcu_sta_eht_mld_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_update for MLO
wifi: mt76: mt7925: update mt7925_mcu_add_bss_info for MLO
wifi: mt76: mt7925: update mt7925_mcu_bss_mld_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_mld_tlv for MLO
wifi: mt76: mt7925: add mt7925_[assign,unassign]_vif_chanctx
wifi: mt76: add def_wcid to struct mt76_wcid
wifi: mt76: mt7925: report link information in rx status
wifi: mt76: mt7925: update rate index according to link id
wifi: mt76: mt7925: add link handling in the mt7925_ipv6_addr_change
...
====================
Link: https://patch.msgid.link/20240711102353.0C849C116B1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The response code of IOMMUFD_PAGE_RESP_FAILURE was defined to be
equivalent to the "Response Failure" in PCI spec, section 10.4.2.1.
This response code indicates that one or more pages within the
associated request group have encountered or caused an unrecoverable
error. Therefore, this response disables the PRI at the function.
Modern I/O virtualization technologies, like SR-IOV, share PRI among
the assignable device units. Therefore, a response failure on one unit
might cause I/O failure on other units.
Remove this response code so that user space can only respond with
SUCCESS or INVALID. The VMM is recommended to emulate a failure response
as a PRI reset, or PRI disable and changing to a non-PRI domain.
Fixes: c714f15860fc ("iommufd: Add fault and response message definitions")
Link: https://lore.kernel.org/r/20240710083341.44617-2-baolu.lu@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Remove the encoding field from 'struct btrfs_stripe_extent'. It was
originally intended to encode the RAID type as well as if we're a data
or a parity stripe.
But the RAID type can be inferred form the block-group and the data vs.
parity differentiation can be done easier with adding a new key type
for parity stripes in the RAID stripe tree.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
There is a bug report that a canceled checksum conversion (still
experimental feature) results in unexpected super block flags:
csum_type 0 (crc32c)
csum_size 4
csum 0x14973811 [match]
bytenr 65536
flags 0x1000000001
( WRITTEN |
CHANGING_FSID_V2 )
magic _BHRfS_M [match]
While for a filesystem with ongoing checksum conversion it should have
either CHANGING_DATA_CSUM or CHANGING_META_CSUM.
[CAUSE]
It turns out that, due to btrfs-progs keeps its own extra flags inside
its own ctree.h headers, not the shared uapi headers, we have
conflicting super flags:
kernel-shared/uapi/btrfs_tree.h:#define BTRFS_SUPER_FLAG_METADUMP_V2 (1ULL << 34)
kernel-shared/uapi/btrfs_tree.h:#define BTRFS_SUPER_FLAG_CHANGING_FSID (1ULL << 35)
kernel-shared/uapi/btrfs_tree.h:#define BTRFS_SUPER_FLAG_CHANGING_FSID_V2 (1ULL << 36)
kernel-shared/ctree.h:#define BTRFS_SUPER_FLAG_CHANGING_DATA_CSUM (1ULL << 36)
kernel-shared/ctree.h:#define BTRFS_SUPER_FLAG_CHANGING_META_CSUM (1ULL << 37)
Note that CHANGING_FSID_V2 is conflicting with CHANGING_DATA_CSUM.
[FIX]
The proper fix would be done inside btrfs-progs, but to keep everything
properly recorded, we should have everything inside the same uapi
header.
Copy all the new flags into uapi header, and change the value for
CHANGING_DATA_CSUM and CHANGING_META_CSUM, while keep the value of
CHANGING_BG_TREE untouched.
Thankfully checksum change is still only experimental and all those
CHANGING_* flags are transient (only for btrfs-progs to resume the
conversion, and kernel will reject them all), the damage is still minor.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Lu Baolu says:
====================
This series implements the functionality of delivering IO page faults to
user space through the IOMMUFD framework. One feasible use case is the
nested translation. Nested translation is a hardware feature that supports
two-stage translation tables for IOMMU. The second-stage translation table
is managed by the host VMM, while the first-stage translation table is
owned by user space. This allows user space to control the IOMMU mappings
for its devices.
When an IO page fault occurs on the first-stage translation table, the
IOMMU hardware can deliver the page fault to user space through the
IOMMUFD framework. User space can then handle the page fault and respond
to the device top-down through the IOMMUFD. This allows user space to
implement its own IO page fault handling policies.
User space application that is capable of handling IO page faults should
allocate a fault object, and bind the fault object to any domain that it
is willing to handle the fault generatd for them. On a successful return
of fault object allocation, the user can retrieve and respond to page
faults by reading or writing to the file descriptor (FD) returned.
The iommu selftest framework has been updated to test the IO page fault
delivery and response functionality.
====================
* iommufd_pri:
iommufd/selftest: Add coverage for IOPF test
iommufd/selftest: Add IOPF support for mock device
iommufd: Associate fault object with iommufd_hw_pgtable
iommufd: Fault-capable hwpt attach/detach/replace
iommufd: Add iommufd fault object
iommufd: Add fault and response message definitions
iommu: Extend domain attach group with handle support
iommu: Add attach handle to struct iopf_group
iommu: Remove sva handle list
iommu: Introduce domain attachment handle
Link: https://lore.kernel.org/all/20240702063444.105814-1-baolu.lu@linux.intel.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When allocating a user iommufd_hw_pagetable, the user space is allowed to
associate a fault object with the hw_pagetable by specifying the fault
object ID in the page table allocation data and setting the
IOMMU_HWPT_FAULT_ID_VALID flag bit.
On a successful return of hwpt allocation, the user can retrieve and
respond to page faults by reading and writing the file interface of the
fault object.
Once a fault object has been associated with a hwpt, the hwpt is
iopf-capable, indicated by hwpt->fault is non NULL. Attaching,
detaching, or replacing an iopf-capable hwpt to an RID or PASID will
differ from those that are not iopf-capable.
Link: https://lore.kernel.org/r/20240702063444.105814-9-baolu.lu@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
An iommufd fault object provides an interface for delivering I/O page
faults to user space. These objects are created and destroyed by user
space, and they can be associated with or dissociated from hardware page
table objects during page table allocation or destruction.
User space interacts with the fault object through a file interface. This
interface offers a straightforward and efficient way for user space to
handle page faults. It allows user space to read fault messages
sequentially and respond to them by writing to the same file. The file
interface supports reading messages in poll mode, so it's recommended that
user space applications use io_uring to enhance read and write efficiency.
A fault object can be associated with any iopf-capable iommufd_hw_pgtable
during the pgtable's allocation. All I/O page faults triggered by devices
when accessing the I/O addresses of an iommufd_hw_pgtable are routed
through the fault object to user space. Similarly, user space's responses
to these page faults are routed back to the iommu device driver through
the same fault object.
Link: https://lore.kernel.org/r/20240702063444.105814-7-baolu.lu@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
iommu_hwpt_pgfaults represent fault messages that the userspace can
retrieve. Multiple iommu_hwpt_pgfaults might be put in an iopf group,
with the IOMMU_PGFAULT_FLAGS_LAST_PAGE flag set only for the last
iommu_hwpt_pgfault.
An iommu_hwpt_page_response is a response message that the userspace
should send to the kernel after finishing handling a group of fault
messages. The @dev_id, @pasid, and @grpid fields in the message
identify an outstanding iopf group for a device. The @cookie field,
which matches the cookie field of the last fault in the group, will
be used by the kernel to look up the pending message.
Link: https://lore.kernel.org/r/20240702063444.105814-6-baolu.lu@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-08
The following pull-request contains BPF updates for your *net-next* tree.
We've added 102 non-merge commits during the last 28 day(s) which contain
a total of 127 files changed, 4606 insertions(+), 980 deletions(-).
The main changes are:
1) Support resilient split BTF which cuts down on duplication and makes BTF
as compact as possible wrt BTF from modules, from Alan Maguire & Eduard Zingerman.
2) Add support for dumping kfunc prototypes from BTF which enables both detecting
as well as dumping compilable prototypes for kfuncs, from Daniel Xu.
3) Batch of s390x BPF JIT improvements to add support for BPF arena and to implement
support for BPF exceptions, from Ilya Leoshkevich.
4) Batch of riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter, from Pu Lehui.
5) Extend BPF test infrastructure to add a CHECKSUM_COMPLETE validation option
for skbs and add coverage along with it, from Vadim Fedorenko.
6) Inline bpf_get_current_task/_btf() helpers in the arm64 BPF JIT which gives
a small 1% performance improvement in micro-benchmarks, from Puranjay Mohan.
7) Extend the BPF verifier to track the delta between linked registers in order
to better deal with recent LLVM code optimizations, from Alexei Starovoitov.
8) Fix bpf_wq_set_callback_impl() kfunc signature where the third argument should
have been a pointer to the map value, from Benjamin Tissoires.
9) Extend BPF selftests to add regular expression support for test output matching
and adjust some of the selftest when compiled under gcc, from Cupertino Miranda.
10) Simplify task_file_seq_get_next() and remove an unnecessary loop which always
iterates exactly once anyway, from Dan Carpenter.
11) Add the capability to offload the netfilter flowtable in XDP layer through
kfuncs, from Florian Westphal & Lorenzo Bianconi.
12) Various cleanups in networking helpers in BPF selftests to shave off a few
lines of open-coded functions on client/server handling, from Geliang Tang.
13) Properly propagate prog->aux->tail_call_reachable out of BPF verifier, so
that x86 JIT does not need to implement detection, from Leon Hwang.
14) Fix BPF verifier to add a missing check_func_arg_reg_off() to prevent an
out-of-bounds memory access for dynpointers, from Matt Bobrowski.
15) Fix bpf_session_cookie() kfunc to return __u64 instead of long pointer as
it might lead to problems on 32-bit archs, from Jiri Olsa.
16) Enhance traffic validation and dynamic batch size support in xsk selftests,
from Tushar Vyavahare.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (102 commits)
selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep
selftests/bpf: amend for wrong bpf_wq_set_callback_impl signature
bpf: helpers: fix bpf_wq_set_callback_impl signature
libbpf: Add NULL checks to bpf_object__{prev_map,next_map}
selftests/bpf: Remove exceptions tests from DENYLIST.s390x
s390/bpf: Implement exceptions
s390/bpf: Change seen_reg to a mask
bpf: Remove unnecessary loop in task_file_seq_get_next()
riscv, bpf: Optimize stack usage of trampoline
bpf, devmap: Add .map_alloc_check
selftests/bpf: Remove arena tests from DENYLIST.s390x
selftests/bpf: Add UAF tests for arena atomics
selftests/bpf: Introduce __arena_global
s390/bpf: Support arena atomics
s390/bpf: Enable arena
s390/bpf: Support address space cast instruction
s390/bpf: Support BPF_PROBE_MEM32
s390/bpf: Land on the next JITed instruction after exception
s390/bpf: Introduce pre- and post- probe functions
s390/bpf: Get rid of get_probe_mem_regno()
...
====================
Link: https://patch.msgid.link/20240708221438.10974-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The prerequisite for MLO support in cfg80211/mac80211 is that all the links
participating in MLO must be from the same wiphy/ieee80211_hw. To meet this
expectation, some drivers may need to group multiple discrete hardware each
acting as a link in MLO under single wiphy.
With this change, supported frequencies and interface combinations of each
individual radio are reported to user space. This allows user space to figure
out the limitations of what combination of channels can be used concurrently.
Even for non-MLO devices, this improves support for devices capable of
running on multiple channels at the same time.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/18a88f9ce82b1c9f7c12f1672430eaf2bb0be295.1720514221.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If the server supports the NFSv4.2 protocol extension to optimise away
returning a stateid when it returns a delegation, then we cache that
information in another capability flag.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Add the attribute delegation XDR definitions from the spec.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This patch expands the status information provided by ethtool for PSE c33
with available power limit and available power limit ranges. It also adds
a call to pse_ethtool_set_pw_limit() to configure the PSE control power
limit.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-5-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This update expands the status information provided by ethtool for PSE c33.
It includes details such as the detected class, current power delivered,
and extended state information.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-1-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a packet sample is observed, the sampling rate that was used is
important to estimate the real frequency of such event.
Store the probability of the parent sample action in the skb's cb area
and use it in psample action to pass it down to psample module.
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-7-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for a new action: psample.
This action accepts a u32 group id and a variable-length cookie and uses
the psample multicast group to make the packet available for
observability.
The maximum length of the user-defined cookie is set to 16, same as
tc_cookie, to discourage using cookies that will not be offloadable.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-6-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Although not explicitly documented in the psample module itself, the
definition of PSAMPLE_ATTR_SAMPLE_RATE seems inherited from act_sample.
Quoting tc-sample(8):
"RATE of 100 will lead to an average of one sampled packet out of every
100 observed."
With this semantics, the rates that we can express with an unsigned
32-bits number are very unevenly distributed and concentrated towards
"sampling few packets".
For example, we can express a probability of 2.32E-8% but we
cannot express anything between 100% and 50%.
For sampling applications that are capable of sampling a decent
amount of packets, this sampling rate semantics is not very useful.
Add a new flag to the uAPI that indicates that the sampling rate is
expressed in scaled probability, this is:
- 0 is 0% probability, no packets get sampled.
- U32_MAX is 100% probability, all packets get sampled.
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-5-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a user cookie to the sample metadata so that sample emitters can
provide more contextual information to samples.
If present, send the user cookie in a new attribute:
PSAMPLE_ATTR_USER_COOKIE.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-2-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exynos merge pull, but are separated out.
Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma
code, and cherry-pick conflict in xe.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/aquantia/aquantia.h
219343755eae ("net: phy: aquantia: add missing include guards")
61578f679378 ("net: phy: aquantia: add support for PHY LEDs")
drivers/net/ethernet/wangxun/libwx/wx_hw.c
bd07a9817846 ("net: txgbe: remove separate irq request for MSI and INTx")
b501d261a5b3 ("net: txgbe: add FDIR ATR support")
https://lore.kernel.org/all/20240703112936.483c1975@canb.auug.org.au/
include/linux/mlx5/mlx5_ifc.h
048a403648fc ("net/mlx5: IFC updates for changing max EQs")
99be56171fa9 ("net/mlx5e: SHAMPO, Re-enable HW-GRO")
https://lore.kernel.org/all/20240701133951.6926b2e3@canb.auug.org.au/
Adjacent changes:
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
4130c67cd123 ("wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference")
3f3126515fbe ("wifi: iwlwifi: mvm: add mvm-specific guard")
include/net/mac80211.h
816c6bec09ed ("wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP")
5a009b42e041 ("wifi: mac80211: track changes in AP's TPE")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A new PEBS data source format is introduced for the p-core of Lunar
Lake. The data source field is extended to 8 bits with new encodings.
A new layout is introduced into the union intel_x86_pebs_dse.
Introduce the lnl_latency_data() to parse the new format.
Enlarge the pebs_data_source[] accordingly to include new encodings.
Only the mem load and the mem store events can generate the data source.
Introduce INTEL_HYBRID_LDLAT_CONSTRAINT and
INTEL_HYBRID_STLAT_CONSTRAINT to mark them.
Add two new bits for the new cache-related data src, L2_MHB and MSC.
The L2_MHB is short for L2 Miss Handling Buffer, which is similar to
LFB (Line Fill Buffer), but to track the L2 Cache misses.
The MSC stands for the memory-side cache.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-6-kan.liang@linux.intel.com
|
|
To prevent conflicts with other ioctl numbers to allow strace to have an
idea of what is happening, add the range of ioctls for the trace buffer
mapping from _IO("T", 0x1) to the range of "R" 0x20 - 0x2F.
Link: https://lore.kernel.org/linux-trace-kernel/20240630105322.GA17573@altlinux.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240630213626.GA23566@altlinux.org/
Cc: Jonathan Corbet <corbet@lwn.net>
Fixes: cf9f0f7c4c5bb ("tracing: Allow user-space mapping of the ring-buffer")
Link: https://lore.kernel.org/20240702153354.367861db@rorschach.local.home
Reported-by: "Dmitry V. Levin" <ldv@strace.io>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
With external time travel, a LOT of message can end up
being exchanged on the socket, taking a significant
amount of time just to do that.
Add a new shared memory optimisation to that, where a
number of changes are made:
- the controller sends a client ID and a shared memory FD
(and a logging FD we don't use) in the ACK message to
the initial START
- the shared memory holds the current time and the
free_until value, so that there's no need to exchange
messages for that
- if the client that's running has shared memory support,
any client (the running one included) can request the
next time it wants to run inside the shared memory,
rather than sending a message, by also updating the
free_until value
- when shared memory is enabled, RUN/WAIT messages no
longer have an ACK, further cutting down on messages
Together, this can reduce the number of messages very
significantly, and reduce overall test/simulation run time.
Co-developed-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Link: https://patch.msgid.link/20240702192118.6ad0a083f574.Ie41206c8ce4507fe26b991937f47e86c24ca7a31@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a message type to the time-travel protocol to broadcast
a small (64-bit) value to all participants in a simulation.
The main use case is to have an identical message come to
all participants in a simulation, e.g. to separate out logs
for different tests running in a single simulation.
Down in the guts of time_travel_handle_message() we can't
use printk() and not even printk_deferred(), so just store
the message and print it at the start of the userspace()
function.
Unfortunately this means that other prints in the kernel
can actually bypass the message, but in most cases where
this is used, for example to separate test logs, userspace
will be involved. Also, even if we could use
printk_deferred(), we'd still need to flush it out in the
userspace() function since otherwise userspace messages
might cross it.
As a result, this is a reasonable compromise, there's no
need to have any core changes and it solves the main use
case we have for it.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Link: https://patch.msgid.link/20240702192118.c4093bc5b15e.I2ca8d006b67feeb866ac2017af7b741c9e06445a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next into main
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
Patch #1 to #11 to shrink memory consumption for transaction objects:
struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */
struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */
struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */
struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */
struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */
struct nft_trans_elem can now be allocated from kmalloc-96 instead of
kmalloc-128 slab.
Series from Florian Westphal. For the record, I have mangled patch #1
to add nft_trans_container_*() and use if for every transaction object.
I have also added BUILD_BUG_ON to ensure struct nft_trans always comes
at the beginning of the container transaction object. And few minor
cleanups, any new bugs are of my own.
Patch #12 simplify check for SCTP GSO in IPVS, from Ismael Luceno.
Patch #13 nf_conncount key length remains in the u32 bound, from Yunjian Wang.
Patch #14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting
default conntrack timeouts via nfnetlink_cttimeout API, from
Lin Ma.
Patch #15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use
larger secctx names than the existing 256 bytes length.
Patch #16 adds a selftest to exercise nfnetlink_queue listeners leaving
nfnetlink_queue, from Florian Westphal.
Patch #17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a protocol spec for tcp_metrics, so that it's accessible via YNL.
Useful at the very least for testing fixes.
In this episode of "10,000 ways to complicate netlink" the metric
nest has defines which are off by 1. iproute2 does:
struct rtattr *m[TCP_METRIC_MAX + 1 + 1];
parse_rtattr_nested(m, TCP_METRIC_MAX + 1, a);
for (i = 0; i < TCP_METRIC_MAX + 1; i++) {
// ...
attr = m[i + 1];
This is too weird to support in YNL, add a new set of defines
with _correct_ values to the official kernel header.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcp_metrics' header lacks the customary _UAPI in the header guard.
This makes YNL build rules work less seamlessly.
We can easily fix that on YNL side, but this could also be
problematic if we ever needed to create a kernel-only tcp_metrics.h.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the necessary infrastructure to the IIO core to support a new
optional DMABUF based interface.
With this new interface, DMABUF objects (externally created) can be
attached to a IIO buffer, and subsequently used for data transfer.
A userspace application can then use this interface to share DMABUF
objects between several interfaces, allowing it to transfer data in a
zero-copy fashion, for instance between IIO and the USB stack.
The userspace application can also memory-map the DMABUF objects, and
access the sample data directly. The advantage of doing this vs. the
read() interface is that it avoids an extra copy of the data between the
kernel and userspace. This is particularly userful for high-speed
devices which produce several megabytes or even gigabytes of data per
second.
As part of the interface, 3 new IOCTLs have been added:
IIO_BUFFER_DMABUF_ATTACH_IOCTL(int fd):
Attach the DMABUF object identified by the given file descriptor to the
buffer.
IIO_BUFFER_DMABUF_DETACH_IOCTL(int fd):
Detach the DMABUF object identified by the given file descriptor from
the buffer. Note that closing the IIO buffer's file descriptor will
automatically detach all previously attached DMABUF objects.
IIO_BUFFER_DMABUF_ENQUEUE_IOCTL(struct iio_dmabuf *):
Request a data transfer to/from the given DMABUF object. Its file
descriptor, as well as the transfer size and flags are provided in the
"iio_dmabuf" structure.
These three IOCTLs have to be performed on the IIO buffer's file
descriptor, obtained using the IIO_BUFFER_GET_FD_IOCTL() ioctl.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Co-developed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240620122726.41232-4-paul@crapouillou.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
