| Age | Commit message (Collapse) | Author |
|---|
|
Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
FUSE_PASSTHROUGH capability to passthrough FUSE operations to backing
files will be made available with kernel config CONFIG_FUSE_PASSTHROUGH.
When requesting FUSE_PASSTHROUGH, userspace needs to specify the
max_stack_depth that is allowed for FUSE on top of backing files.
Introduce the flag FOPEN_PASSTHROUGH and backing_id to fuse_open_out
argument that can be used when replying to OPEN request, to setup
passthrough of io operations on the fuse inode to a backing file.
Introduce a refcounted fuse_backing object that will be used to
associate an open backing file with a fuse inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The NXP i.MX8MP integrates an ISP8000Nano from VeriSilicon, which is a
derivative of the ISP found in earlier Rockchip SoCs. It isn't clear at
which exact point the two product lines have diverged, and there is no
public information regarding the version numbering scheme of the
ISP8000Nano. Nonetheless, this ISP is close enough to the V10 found in
the RK3399 to be supported by the same driver.
Add an entry for the ISP found in the NXP i.MX8MP to the version enum.
Given the lack of information on the version numbering scheme, and on
whether or not the version in the i.MX8MP is identical to other
ISP8000Nano versions or has been customized for the i.MX8MP, depart from
the number-based versions and name this new version V_IMX8MP.
Update comments for the other versions and for relevant parameters
blocks to clearly indicate the size of grids and histogram for the
different versions.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/udp.c
f796feabb9f5 ("udp: add local "peek offset enabled" flag")
56667da7399e ("net: implement lockless setsockopt(SO_PEEK_OFF)")
Adjacent changes:
net/unix/garbage.c
aa82ac51d633 ("af_unix: Drop oob_skb ref before purging queue in GC.")
11498715f266 ("af_unix: Remove io_uring code for GC.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a system has multiple NUMA nodes and it becomes bandwidth hungry,
using the current MPOL_INTERLEAVE could be an wise option.
However, if those NUMA nodes consist of different types of memory such as
socket-attached DRAM and CXL/PCIe attached DRAM, the round-robin based
interleave policy does not optimally distribute data to make use of their
different bandwidth characteristics.
Instead, interleave is more effective when the allocation policy follows
each NUMA nodes' bandwidth weight rather than a simple 1:1 distribution.
This patch introduces a new memory policy, MPOL_WEIGHTED_INTERLEAVE,
enabling weighted interleave between NUMA nodes. Weighted interleave
allows for proportional distribution of memory across multiple numa nodes,
preferably apportioned to match the bandwidth of each node.
For example, if a system has 1 CPU node (0), and 2 memory nodes (0,1),
with bandwidth of (100GB/s, 50GB/s) respectively, the appropriate weight
distribution is (2:1).
Weights for each node can be assigned via the new sysfs extension:
/sys/kernel/mm/mempolicy/weighted_interleave/
For now, the default value of all nodes will be `1`, which matches the
behavior of standard 1:1 round-robin interleave. An extension will be
added in the future to allow default values to be registered at kernel and
device bringup time.
The policy allocates a number of pages equal to the set weights. For
example, if the weights are (2,1), then 2 pages will be allocated on node0
for every 1 page allocated on node1.
The new flag MPOL_WEIGHTED_INTERLEAVE can be used in set_mempolicy(2)
and mbind(2).
Some high level notes about the pieces of weighted interleave:
current->il_prev:
Tracks the node previously allocated from.
current->il_weight:
The active weight of the current node (current->il_prev)
When this reaches 0, current->il_prev is set to the next node
and current->il_weight is set to the next weight.
weighted_interleave_nodes:
Counts the number of allocations as they occur, and applies the
weight for the current node. When the weight reaches 0, switch
to the next node. Operates only on task->mempolicy.
weighted_interleave_nid:
Gets the total weight of the nodemask as well as each individual
node weight, then calculates the node based on the given index.
Operates on VMA policies.
bulk_array_weighted_interleave:
Gets the total weight of the nodemask as well as each individual
node weight, then calculates the number of "interleave rounds" as
well as any delta ("partial round"). Calculates the number of
pages for each node and allocates them.
If a node was scheduled for interleave via interleave_nodes, the
current weight will be allocated first.
Operates only on the task->mempolicy.
One piece of complexity is the interaction between a recent refactor which
split the logic to acquire the "ilx" (interleave index) of an allocation
and the actually application of the interleave. If a call to
alloc_pages_mpol() were made with a weighted-interleave policy and ilx set
to NO_INTERLEAVE_INDEX, weighted_interleave_nodes() would operate on a VMA
policy - violating the description above.
An inspection of all callers of alloc_pages_mpol() shows that all external
callers set ilx to `0`, an index value, or will call get_vma_policy() to
acquire the ilx.
For example, mm/shmem.c may call into alloc_pages_mpol. The call stacks
all set (pgoff_t ilx) or end up in `get_vma_policy()`. This enforces the
`weighted_interleave_nodes()` and `weighted_interleave_nid()` policy
requirements (task/vma respectively).
Link: https://lkml.kernel.org/r/20240202170238.90004-4-gregory.price@memverge.com
Suggested-by: Hasan Al Maruf <Hasan.Maruf@amd.com>
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Co-developed-by: Rakie Kim <rakie.kim@sk.com>
Signed-off-by: Rakie Kim <rakie.kim@sk.com>
Co-developed-by: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Co-developed-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Co-developed-by: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Signed-off-by: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Co-developed-by: Ravi Jonnalagadda <ravis.opensrc@micron.com>
Signed-off-by: Ravi Jonnalagadda <ravis.opensrc@micron.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The batch lookup and lookup_and_delete APIs have two parameters,
in_batch and out_batch, to facilitate iterative
lookup/lookup_and_deletion operations for supported maps. Except NULL
for in_batch at the start of these two batch operations, both parameters
need to point to memory equal or larger than the respective map key
size, except for various hashmaps (hash, percpu_hash, lru_hash,
lru_percpu_hash) where the in_batch/out_batch memory size should be
at least 4 bytes.
Document these semantics to clarify the API.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240221211838.1241578-1-martin.kelly@crowdstrike.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Now that we have net-specific tags, extend the tag allocation ioctls
(SIOCMCTPALLOCTAG / SIOCMCTPDROPTAG) to allow a network parameter to be
passed to the tag allocation.
We also add a local_addr member to the ioc struct, to allow for a future
finer-grained tag allocation using local EIDs too. We don't add any
specific support for that now though, so require MCTP_ADDR_ANY or
MCTP_ADDR_NULL for those at present.
The old ioctls will still work, but allocate for the default MCTP net.
These are now marked as deprecated in the header.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Added constants for advertising 100BT1 and 1000BT1 in register BASE-T1
auto-negotiation advertisement register [31:16] (Register 7.515)
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240218075753.18067-2-dima.fedrau@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The second "new features" pull request for v6.9. Lots of iwlwifi and
stack changes this time. And naturally smaller changes to other drivers.
We also twice merged wireless into wireless-next to avoid conflicts
between the trees.
Major changes:
stack
* mac80211: negotiated TTLM request support
* SPP A-MSDU support
* mac80211: wider bandwidth OFDMA config support
iwlwifi
* kunit tests
* bump FW API to 89 for AX/BZ/SC devices
* enable SPP A-MSDUs
* support for new devices
ath12k
* refactoring in preparation for Multi-Link Operation (MLO) support
* 1024 Block Ack window size support
* provide firmware wmi logs via a trace event
ath11k
* 36 bit DMA mask support
* support 6 GHz station power modes: Low Power Indoor (LPI), Standard
Power) SP and Very Low Power (VLP)
rtl8xxxu
* TP-Link TL-WN823N V2 support
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Right now we determine the scope of the signal based on the type of
pidfd. There are use-cases where it's useful to override the scope of
the signal. For example in [1]. Add flags to determine the scope of the
signal:
(1) PIDFD_SIGNAL_THREAD: send signal to specific thread reference by @pidfd
(2) PIDFD_SIGNAL_THREAD_GROUP: send signal to thread-group of @pidfd
(2) PIDFD_SIGNAL_PROCESS_GROUP: send signal to process-group of @pidfd
Since we now allow specifying PIDFD_SEND_PROCESS_GROUP for
pidfd_send_signal() to send signals to process groups we need to adjust
the check restricting si_code emulation by userspace to account for
PIDTYPE_PGID.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://github.com/systemd/systemd/issues/31093 [1]
Link: https://lore.kernel.org/r/20240210-chihuahua-hinzog-3945b6abd44a@brauner
Link: https://lore.kernel.org/r/20240214123655.GB16265@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct tc_pedit.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the serial/tty fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / miscdriver fixes from Greg KH:
"Here is a small set of char/misc and IIO driver fixes for 6.8-rc5.
Included in here are:
- lots of iio driver fixes for reported issues
- nvmem device naming fixup for reported problem
- interconnect driver fixes for reported issues
All of these have been in linux-next for a while with no reported the
issues (the nvmem patch was included in a different branch in
linux-next before sent to me for inclusion here)"
* tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
nvmem: include bit index in cell sysfs file name
iio: adc: ad4130: only set GPIO_CTRL if pin is unused
iio: adc: ad4130: zero-initialize clock init data
interconnect: qcom: x1e80100: Add missing ACV enable_mask
interconnect: qcom: sm8650: Use correct ACV enable_mask
iio: accel: bma400: Fix a compilation problem
iio: commom: st_sensors: ensure proper DMA alignment
iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP
iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier
staging: iio: ad5933: fix type mismatch regression
iio: humidity: hdc3020: fix temperature offset
iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup()
iio: adc: ad_sigma_delta: ensure proper DMA alignment
iio: imu: adis: ensure proper DMA alignment
iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
iio: imu: bno055: serdev requires REGMAP
iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
iio: pressure: bmp280: Add missing bmp085 to SPI id table
iio: core: fix memleak in iio_device_register_sysfs
interconnect: qcom: sm8550: Enable sync_state
...
|
|
This patch introduces three new ioctls. They all should be called on a
data endpoint (ie. not ep0). They are:
- FUNCTIONFS_DMABUF_ATTACH, which takes the file descriptor of a DMABUF
object to attach to the endpoint.
- FUNCTIONFS_DMABUF_DETACH, which takes the file descriptor of the
DMABUF to detach from the endpoint. Note that closing the endpoint's
file descriptor will automatically detach all attached DMABUFs.
- FUNCTIONFS_DMABUF_TRANSFER, which requests a data transfer from / to
the given DMABUF. Its argument is a structure that packs the DMABUF's
file descriptor, the size in bytes to transfer (which should generally
be set to the size of the DMABUF), and a 'flags' field which is unused
for now.
Before this ioctl can be used, the related DMABUF must be attached
with FUNCTIONFS_DMABUF_ATTACH.
These three ioctls enable the FunctionFS code to transfer data between
the USB stack and a DMABUF object, which can be provided by a driver
from a completely different subsystem, in a zero-copy fashion.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20240130122340.54813-4-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The iommu fault data is currently defined in uapi/linux/iommu.h, but is
only used inside the iommu subsystem. Move it to linux/iommu.h, where it
will be more accessible to kernel drivers.
With this done, uapi/linux/iommu.h becomes empty and can be removed from
the tree.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
As for IMA, move hardcoded EVM function calls from various places in the
kernel to the LSM infrastructure, by introducing a new LSM named 'evm'
(last and always enabled like 'ima'). The order in the Makefile ensures
that 'evm' hooks are executed after 'ima' ones.
Make EVM functions as static (except for evm_inode_init_security(), which
is exported), and register them as hook implementations in init_evm_lsm().
Also move the inline functions evm_inode_remove_acl(),
evm_inode_post_remove_acl(), and evm_inode_post_set_acl() from the public
evm.h header to evm_main.c.
Unlike before (see commit to move IMA to the LSM infrastructure),
evm_inode_post_setattr(), evm_inode_post_set_acl(),
evm_inode_post_remove_acl(), and evm_inode_post_removexattr() are not
executed for private inodes.
Finally, add the LSM_ID_EVM case in lsm_list_modules_test.c
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Move hardcoded IMA function calls (not appraisal-specific functions) from
various places in the kernel to the LSM infrastructure, by introducing a
new LSM named 'ima' (at the end of the LSM list and always enabled like
'integrity').
Having IMA before EVM in the Makefile is sufficient to preserve the
relative order of the new 'ima' LSM in respect to the upcoming 'evm' LSM,
and thus the order of IMA and EVM function calls as when they were
hardcoded.
Make moved functions as static (except ima_post_key_create_or_update(),
which is not in ima_main.c), and register them as implementation of the
respective hooks in the new function init_ima_lsm().
Select CONFIG_SECURITY_PATH, to ensure that the path-based LSM hook
path_post_mknod is always available and ima_post_path_mknod() is always
executed to mark files as new, as before the move.
A slight difference is that IMA and EVM functions registered for the
inode_post_setattr, inode_post_removexattr, path_post_mknod,
inode_post_create_tmpfile, inode_post_set_acl and inode_post_remove_acl
won't be executed for private inodes. Since those inodes are supposed to be
fs-internal, they should not be of interest to IMA or EVM. The S_PRIVATE
flag is used for anonymous inodes, hugetlbfs, reiserfs xattrs, XFS scrub
and kernel-internal tmpfs files.
Conditionally register ima_post_key_create_or_update() if
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS is enabled. Also, conditionally register
ima_kernel_module_request() if CONFIG_INTEGRITY_ASYMMETRIC_KEYS is enabled.
Finally, add the LSM_ID_IMA case in lsm_list_modules_test.c.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The powerpc toolchain keeps a copy of the HWCAP bit masks in the TCB
for fast access by the __builtin_cpu_supports() built-in function. The
TCB space for the HWCAP entries - which are created in pairs - is an ABI
extension, so waiting to create the space for HWCAP3 and HWCAP4 until
they are needed is problematic. Define AT_HWCAP3 and AT_HWCAP4 in the
generic uapi header so they can be used in glibc to reserve space in the
powerpc TCB for their future use.
I scanned through the Linux and GLIBC source codes looking for unused
AT_* values and 29 and 30 did not seem to be used, so they are what I
went with.
Signed-off-by: Peter Bergner <bergner@linux.ibm.com>
Acked-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/a406b535-dc55-4856-8ae9-5a063644a1af@linux.ibm.com
|
|
Pull the latest 6.8 stuff into devel branch for further development.
Fixed the trivial merge conflict for HD-audio Realtek stuff.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The documentation for default_values mentions high/low which can be
confusing, particularly when the ACTIVE_LOW flag is set.
Replace high/low with active/inactive to clarify that the values are
logical not physical.
Similarly, clarify the interpretation of values in struct gpiohandle_data.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for the 6.8 cycle
Usual mixed bag of issues introduced this cycle and fixes for long term
issues that have been identified recently + one case where I messed up
a merge resolution and dropped the build file changes.
Most important is the userspace ABI fix for the iio_modifier enum
where we accidentally added new entries in the middle rather than at
the end.
IIO Core
- Close a memory leak in an error path.
- Move LIGHT_UVA and LIGHT_UVB definitions to end of the iio_modifier
enum to avoid breaking older userspace. (not yet in a released kernel
thankfully).
adi,adis
- Fix a DMA buffer alignment issue that was missing in series that fixed
these across IIO.
adi,ad-sigma-delta
- Fix a DMA buffer alignment issue that was missing in series that fixed
these across IIO.
adi,ad4130
- Zero init remaining fields of clock init data.
- Only set GPIO control bits on pins that aren't in use for anything else.
adi,ad5933
- Fix an old bug due to type mismatch. This is a rare device so good to
get some new test coverage.
adi,ad7091r
- Use right variable for an error return code.
bosch,bma400
- Add missing CONFIG_REGMAP_I2C dependency.
bosch,bmp280:
- Add missing bmp085 ID to the SPI table to avoid mismatch with the
of_device_id table.
hid-sensors:
- Avoid returning an error for timestamp read back that succeeds.
pni,rm3100
- Check value read from RM31000_REG_TMRC register is valid before using
it. Hardening to avoid a real world issue seen on some faulty hardware.
st,st-sensors
- Fix a DMA buffer alignment issue that was missing in series that fixed
these across IIO.
ti,hdc3020
- Add missing Kconfig and Makefile entrees accidentally dropped when patches
were applied.
- Fix wrong temperature offset (negated)
* tag 'iio-fixes-for-6.8a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: adc: ad4130: only set GPIO_CTRL if pin is unused
iio: adc: ad4130: zero-initialize clock init data
iio: accel: bma400: Fix a compilation problem
iio: commom: st_sensors: ensure proper DMA alignment
iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP
iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier
staging: iio: ad5933: fix type mismatch regression
iio: humidity: hdc3020: fix temperature offset
iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup()
iio: adc: ad_sigma_delta: ensure proper DMA alignment
iio: imu: adis: ensure proper DMA alignment
iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
iio: imu: bno055: serdev requires REGMAP
iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
iio: pressure: bmp280: Add missing bmp085 to SPI id table
iio: core: fix memleak in iio_device_register_sysfs
|
|
Add an ioctl for getting and setting epoll_params. User programs can use
this ioctl to get and set the busy poll usec time, packet budget, and
prefer busy poll params for a specific epoll context.
Parameters are limited:
- busy_poll_usecs is limited to <= s32_max
- busy_poll_budget is limited to <= NAPI_POLL_WEIGHT by unprivileged
users (!capable(CAP_NET_ADMIN))
- prefer_busy_poll must be 0 or 1
- __pad must be 0
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CAN XL data frames contain an 8-bit virtual CAN network identifier (VCID).
A VCID value of zero represents an 'untagged' CAN XL frame.
To receive and send these optional VCIDs via CAN_RAW sockets a new socket
option CAN_RAW_XL_VCID_OPTS is introduced to define/access VCID content:
- tx: set the outgoing VCID value by the kernel (one fixed 8-bit value)
- tx: pass through VCID values from the user space (e.g. for traffic replay)
- rx: apply VCID receive filter (value/mask) to be passed to the user space
With the 'tx pass through' option CAN_RAW_XL_VCID_TX_PASS all valid VCID
values can be sent, e.g. to replay full qualified CAN XL traffic.
The VCID value provided for the CAN_RAW_XL_VCID_TX_SET option will
override the VCID value in the struct canxl_frame.prio defined for
CAN_RAW_XL_VCID_TX_PASS when both flags are set.
With a rx_vcid_mask of zero all possible VCID values (0x00 - 0xFF) are
passed to the user space when the CAN_RAW_XL_VCID_RX_FILTER flag is set.
Without this flag only untagged CAN XL frames (VCID = 0x00) are delivered
to the user space (default).
The 8-bit VCID is stored inside the CAN XL prio element (only in CAN XL
frames!) to not interfere with other CAN content or the CAN filters
provided by the CAN_RAW sockets and kernel infrastruture.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20240212213550.18516-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.9-2024-02-09:
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- S3 fixes
- VCN 4.0.5 fixes
- DP MST fixes
- SR-IOV fixes
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
UAPI:
- Bump KFD version so UMDs know that the fixes that enable the management of
VA mappings in compute VMs using the GEM_VA ioctl for DMABufs exported from KFD are present
- Add INFO query for input power. This matches the existing INFO query for average
power. Used in gaming HUDs, etc.
Example userspace: https://github.com/Umio-Yasuno/libdrm-amdgpu-sys-rs/tree/input_power
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209221459.5453-1-alexander.deucher@amd.com
|
|
Add a report reason for waking up due to an unprotected
deauth/disassoc when MFP is used.
If setting wowlan to wake on disconnection, and an unprotected
deatuh/disassoc arrived (in MFP), some drivers might want to
report wakeup due to unprotected deauth/disassoc, rather than
dissassociation. Add support for that.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206164849.8dc9ad531a17.I7f8e926adf927f762e11aaa3458f6354665c7fc5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the hardware supports a disabled channel, it may in
some cases be possible to use monitor mode (without any
transmit) on it when it's otherwise disabled. Add a new
channel flag IEEE80211_CHAN_CAN_MONITOR that makes it
possible for a driver to indicate such a thing.
Make it per channel so drivers could have a choice with
it, perhaps it's only possible on some channels, perhaps
some channels are not supported at all, but still there
and marked disabled.
In _nl80211_parse_chandef() simplify the code and check
only for an unknown channel, _cfg80211_chandef_usable()
will later check for IEEE80211_CHAN_DISABLED anyway.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206164849.87fad3a21a09.I9116b2fdc2e2c9fd59a9273a64db7fcb41fc0328@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
UHB stands for "Ultra High Band", but this term doesn't really
exist in the spec. Rename all occurrences to "6 GHz", but keep
a few defines for userspace API compatibility.
Link: https://msgid.link/20240206164849.c9cfb9400839.I153db3b951934a1d84409c17fbe1f1d1782543fa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently whenever NL80211_CMD_DEL_STATION command is called without any
MAC address, all stations present on that interface are flushed.
However with MLO there is a need to flush such stations only which are
using at least a particular link from the AP MLD interface.
For example - 2 GHz and 5 GHz are part of an AP MLD.
To this interface, following stations are connected -
1. One non-EHT STA on 2 GHz link.
2. One non-EHT STA on 5 GHz link.
3. One Multi-Link STA having 2 GHz and 5 GHz as active links.
Now if currently, NL80211_CMD_DEL_STATION is issued by the 2 GHz link
without any MAC address, it would flush all station entries. However,
flushing of station entry #2 at least is not desireable since it
is connected to 5 GHz link alone.
Hence, add an option to pass link ID as well in the command so that if link
ID is passed, stations using that passed link ID alone would be flushed
and others will not.
So after this, station entries #1 and #3 alone would be flushed and #2 will
remain as it is.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240205162952.1697646-2-quic_adisi@quicinc.com
[clarify documentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The ISO15765-2 standard supports to take the PDUs communication parameters
blocksize (BS) and Separation Time minimum (STmin) either from the first
received flow control (FC) "static" or from every received FC "dynamic".
Add a new CAN_ISOTP_DYN_FC_PARMS flag to support dynamic FC parameters.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20231208165729.3011-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add a new ioctl for getting the sysfs name of a filesystem - the path
under /sys/fs.
This is going to let us standardize exporting data from sysfs across
filesystems, e.g. time stats.
The returned path will always be of the form "$FSTYP/$SYSFS_IDENTIFIER",
where the sysfs identifier may be a UUID (for bcachefs) or a device name
(xfs).
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20240207025624.1019754-6-kent.overstreet@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Linux 6.8-rc4
Pulling this for a bugfix upstream with which the gpio/for-next branch
conflicts.
|
|
This adds an api to register and unregister the napi for io-uring. If
the arg value is specified when unregistering, the current napi setting
for the busy poll timeout is copied into the user structure. If this is
not required, NULL can be passed as the arg value.
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230608163839.2891748-7-shr@devkernel.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Adds support for doing truncate through io_uring, eliminating
the need for applications to roll their own thread pool or offload
mechanism to be able to do non-blocking truncates.
Signed-off-by: Tony Solomonik <tony.solomonik@gmail.com>
Link: https://lore.kernel.org/r/20240202121724.17461-3-tony.solomonik@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Implementation of support for audio controls in accordance with the
extension of the virtio sound device specification [1] planned for
virtio-v1.3-cs01.
The device can announce the VIRTIO_SND_F_CTLS feature. If the feature is
negotiated, then an additional field appears in the configuration space:
struct virtio_snd_config {
...
/* number of available control elements */
__le32 controls;
};
The driver can send the following requests to manage audio controls:
enum {
...
/* control element request types */
VIRTIO_SND_R_CTL_INFO = 0x0300,
VIRTIO_SND_R_CTL_ENUM_ITEMS,
VIRTIO_SND_R_CTL_READ,
VIRTIO_SND_R_CTL_WRITE,
VIRTIO_SND_R_CTL_TLV_READ,
VIRTIO_SND_R_CTL_TLV_WRITE,
VIRTIO_SND_R_CTL_TLV_COMMAND,
...
};
And the device can send the following audio control event notification:
enum {
...
/* control element event types */
VIRTIO_SND_EVT_CTL_NOTIFY = 0x1200,
...
};
See additional details in [1].
[1] https://lists.oasis-open.org/archives/virtio-comment/202104/msg00013.html
Signed-off-by: Anton Yakovlev <anton.yakovlev@opensynergy.com>
Signed-off-by: Aiswarya Cyriac <aiswarya.cyriac@opensynergy.com>
Link: https://lore.kernel.org/r/20240115133654.576068-2-aiswarya.cyriac@opensynergy.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/common.h
38cc3c6dcc09 ("net: stmmac: protect updates of 64-bit statistics counters")
fd5a6a71313e ("net: stmmac: est: Per Tx-queue error count for HLBF")
c5c3e1bfc9e0 ("net: stmmac: Offload queueMaxSDU from tc-taprio")
drivers/net/wireless/microchip/wilc1000/netdev.c
c9013880284d ("wifi: fill in MODULE_DESCRIPTION()s for wilc1000")
328efda22af8 ("wifi: wilc1000: do not realloc workqueue everytime an interface is added")
net/unix/garbage.c
11498715f266 ("af_unix: Remove io_uring code for GC.")
1279f9d9dec2 ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi and netfilter.
Current release - regressions:
- nic: intel: fix old compiler regressions
- netfilter: ipset: missing gc cancellations fixed
Current release - new code bugs:
- netfilter: ctnetlink: fix filtering for zone 0
Previous releases - regressions:
- core: fix from address in memcpy_to_iter_csum()
- netfilter: nfnetlink_queue: un-break NF_REPEAT
- af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC.
- devlink: avoid potential loop in devlink_rel_nested_in_notify_work()
- iwlwifi:
- mvm: fix a battery life regression
- fix double-free bug
- mac80211: fix waiting for beacons logic
- nic: nfp: flower: prevent re-adding mac index for bonded port
Previous releases - always broken:
- rxrpc: fix generation of serial numbers to skip zero
- tipc: check the bearer type before calling tipc_udp_nl_bearer_add()
- tunnels: fix out of bounds access when building IPv6 PMTU error
- nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER
missed
- nic: atlantic: fix DMA mapping for PTP hwts ring
Misc:
- selftests: more fixes to deal with very slow hosts"
* tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
netfilter: nft_set_pipapo: remove scratch_aligned pointer
netfilter: nft_set_pipapo: add helper to release pcpu scratch area
netfilter: nft_set_pipapo: store index in scratch maps
netfilter: nft_set_rbtree: skip end interval element from gc
netfilter: nfnetlink_queue: un-break NF_REPEAT
netfilter: nf_tables: use timestamp to check for set element timeout
netfilter: nft_ct: reject direction for ct id
netfilter: ctnetlink: fix filtering for zone 0
s390/qeth: Fix potential loss of L3-IP@ in case of network issues
netfilter: ipset: Missing gc cancellations fixed
octeontx2-af: Initialize maps.
net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio
net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio
netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
netfilter: nft_compat: restrict match/target protocol to u16
netfilter: nft_compat: reject unused compat flag
netfilter: nft_compat: narrow down revision to unsigned 8-bits
net: intel: fix old compiler regressions
MAINTAINERS: Maintainer change for rds
selftests: cmsg_ipv6: repeat the exact packet
...
|
|
Add a new generic ioctls for querying the filesystem UUID.
These are lifted versions of the ext4 ioctls, with one change: we're not
using a flexible array member, because UUIDs will never be more than 16
bytes.
This patch adds a generic implementation of FS_IOC_GETFSUUID, which
reads from super_block->s_uuid. We're not lifting SETFSUUID from ext4 -
that can be done on offline filesystems by the people who need it,
trying to do it online is just asking for too much trouble.
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20240207025624.1019754-4-kent.overstreet@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
KVM_CAP_IRQ_ROUTING is always defined, so there is no need to check if it is.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since all architectures (for historical reasons) have to define
struct kvm_guest_debug_arch, and since userspace has to check
KVM_CHECK_EXTENSION(KVM_CAP_SET_GUEST_DEBUG) anyway, there is
no advantage in masking the capability #define itself. Remove
the #define __KVM_HAVE_GUEST_DEBUG from architecture-specific
headers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
While this in principle breaks userspace code that mentions KVM_ARM_DEV_*
on architectures other than aarch64, this seems unlikely to be
a problem considering that run->s.regs.device_irq_level is only
defined on that architecture.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
While this in principle breaks the appearance of KVM_S390_* ioctls on architectures
other than s390, this seems unlikely to be a problem considering that there are
already many "struct kvm_s390_*" definitions in arch/s390/include/uapi.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
While this in principle breaks the appearance of KVM_PPC_* ioctls on architectures
other than powerpc, this seems unlikely to be a problem considering that there are
already many "struct kvm_ppc_*" definitions in arch/powerpc/include/uapi.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Several capabilities that exist only on x86 nevertheless have their
structs defined in include/uapi/linux/kvm.h. Move them to
arch/x86/include/uapi/asm/kvm.h for cleanliness.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move __GENMASK and __GENMASK_ULL from include/ to include/uapi/ so that they can
be used to define masks in userspace API headers. Compared to what is already
in include/linux/bits.h, the definitions need to use the uglified versions of
UL(), ULL(), BITS_PER_LONG and BITS_PER_LONG_LONG (which did not even exist),
but otherwise expand to the same content.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add constants indicating 2.5g and 5g ability in the MMD PMA speed
register.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/98e15038-d96c-442f-93e4-410100d27866@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Flag (1 << 0) is ignored is set, never used, reject it it with EINVAL
instead.
Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add support for the independent control state machine per IEEE
802.1AX-2008 5.4.15 in addition to the existing implementation of the
coupled control state machine.
Introduces two new states, AD_MUX_COLLECTING and AD_MUX_DISTRIBUTING in
the LACP MUX state machine for separated handling of an initial
Collecting state before the Collecting and Distributing state. This
enables a port to be in a state where it can receive incoming packets
while not still distributing. This is useful for reducing packet loss when
a port begins distributing before its partner is able to collect.
Added new functions such as bond_set_slave_tx_disabled_flags and
bond_set_slave_rx_enabled_flags to precisely manage the port's collecting
and distributing states. Previously, there was no dedicated method to
disable TX while keeping RX enabled, which this patch addresses.
Note that the regular flow process in the kernel's bonding driver remains
unaffected by this patch. The extension requires explicit opt-in by the
user (in order to ensure no disruptions for existing setups) via netlink
support using the new bonding parameter coupled_control. The default value
for coupled_control is set to 1 so as to preserve existing behaviour.
Signed-off-by: Aahil Awatramani <aahila@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240202175858.1573852-1-aahila@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Named nested unions need their prefix:
https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html#nested-structs-unions
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
