summaryrefslogtreecommitdiff
path: root/include/uapi
AgeCommit message (Collapse)Author
2024-11-11mm: madvise: implement lightweight guard page mechanismLorenzo Stoakes
Implement a new lightweight guard page feature, that is regions of userland virtual memory that, when accessed, cause a fatal signal to arise. Currently users must establish PROT_NONE ranges to achieve this. However this is very costly memory-wise - we need a VMA for each and every one of these regions AND they become unmergeable with surrounding VMAs. In addition repeated mmap() calls require repeated kernel context switches and contention of the mmap lock to install these ranges, potentially also having to unmap memory if installed over existing ranges. The lightweight guard approach eliminates the VMA cost altogether - rather than establishing a PROT_NONE VMA, it operates at the level of page table entries - establishing PTE markers such that accesses to them cause a fault followed by a SIGSGEV signal being raised. This is achieved through the PTE marker mechanism, which we have already extended to provide PTE_MARKER_GUARD, which we installed via the generic page walking logic which we have extended for this purpose. These guard ranges are established with MADV_GUARD_INSTALL. If the range in which they are installed contain any existing mappings, they will be zapped, i.e. free the range and unmap memory (thus mimicking the behaviour of MADV_DONTNEED in this respect). Any existing guard entries will be left untouched. There is therefore no nesting of guarded pages. Guarded ranges are NOT cleared by MADV_DONTNEED nor MADV_FREE (in both instances the memory range may be reused at which point a user would expect guards to still be in place), but they are cleared via MADV_GUARD_REMOVE, process teardown or unmapping of memory ranges. The guard property can be removed from ranges via MADV_GUARD_REMOVE. The ranges over which this is applied, should they contain non-guard entries, will be untouched, with only guard entries being cleared. We permit this operation on anonymous memory only, and only VMAs which are non-special, non-huge and not mlock()'d (if we permitted this we'd have to drop locked pages which would be rather counterintuitive). Racing page faults can cause repeated attempts to install guard pages that are interrupted, result in a zap, and this process can end up being repeated. If this happens more than would be expected in normal operation, we rescind locks and retry the whole thing, which avoids lock contention in this scenario. Link: https://lkml.kernel.org/r/6aafb5821bf209f277dfae0787abb2ef87a37542.1730123433.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Suggested-by: Jann Horn <jannh@google.com> Suggested-by: David Hildenbrand <david@redhat.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Suggested-by: Jann Horn <jannh@google.com> Suggested-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chris Zankel <chris@zankel.net> Cc: Helge Deller <deller@gmx.de> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jeff Xu <jeffxu@chromium.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-11-11Merge tag 'drm-misc-next-2024-11-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.13: UAPI Changes: - Add 1X7X5 media-bus formats. Cross-subsystem Changes: - Maintainer updates for VKMS and IT6263. - Add media-bus-fmt for MEDIA_BUS_FMT_RGB101010_1X7X5_*. - Add IT6263 DT bindings and driver. Core Changes: - Add ABGR210101010 support to panic handler. - Use ATOMIC64_INIT in drm_file.c - Improve scheduler teardown documentation. Driver Changes: - Make mediatek compile on ARM again. - Add missing drm/drm_bridge.h header include, already in drm-next. - Small fixes and cleanups to vkms, bridge/it6505, panfrost, panthor. - Add panic support to nouveau for nv50+. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/344afe41-d27b-408a-8542-bfecfd3555f6@linux.intel.com
2024-11-09net: mctp: Expose transport binding identifier via IFLA attributeKhang Nguyen
MCTP control protocol implementations are transport binding dependent. Endpoint discovery is mandatory based on transport binding. Message timing requirements are specified in each respective transport binding specification. However, we currently have no means to get this information from MCTP links. Add a IFLA_MCTP_PHYS_BINDING netlink link attribute, which represents the transport type using the DMTF DSP0239-defined type numbers, returned as part of RTM_GETLINK data. We get an IFLA_MCTP_PHYS_BINDING attribute for each MCTP link, for example: - 0x00 (unspec) for loopback interface; - 0x01 (SMBus/I2C) for mctpi2c%d interfaces; and - 0x05 (serial) for mctpserial%d interfaces. Signed-off-by: Khang Nguyen <khangng@os.amperecomputing.com> Reviewed-by: Matt Johnston <matt@codeconstruct.com.au> Link: https://patch.msgid.link/20241105071915.821871-1-khangng@os.amperecomputing.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-09Merge commit '9365f0de4303f82ed4c2db1c39d3de824b249d80' into HEADJonathan Cameron
Merge v6.12-rc6 via char-misc-next to get some fixes needed for next few patches in IIO.
2024-11-08media: replace obsolete hans.verkuil@cisco.com aliasHans Verkuil
The old hans.verkuil@cisco.com email address was discontinued years ago. Replace it with the correct hansverk@cisco.com email. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-11-08Merge tag 'amd-drm-next-6.13-2024-11-06' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.13-2024-11-06: amdgpu: - Misc cleanups - OLED fixes - DCN 4.x fixes - DCN 3.5 fixes - 8K fixes - IPS fixes - DSC fixes - S3 fix - KASAN fix - SMU13 fixes - fdinfo fixes - USB-C fixes - ACPI fix - Fix dummy page overlapping mappings - Fix workload profile handling - Add user control for zero RPM on SMU13 - Cleaner shader updates - Stop syncing PRT map operations - Debugfs permissions fixes - Debugfs bounds check fix - RAS cleanups - Enforce isolation updates amdkfd: - Add topology cap flag for per queue reset - Add an interface to query whether KFD queues are present - Use dynamic allocation for get_cu_occupancy From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241106163904.189108-1-alexander.deucher@amd.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-11-07net: nfc: Propagate ISO14443 type A target ATS to userspace via netlinkJuraj Šarinay
Add a 20-byte field ats to struct nfc_target and expose it as NFC_ATTR_TARGET_ATS via the netlink interface. The payload contains 'historical bytes' that help to distinguish cards from one another. The information is commonly used to assemble an emulated ATR similar to that reported by smart cards with contacts. Add a 20-byte field target_ats to struct nci_dev to hold the payload obtained in nci_rf_intf_activated_ntf_packet() and copy it to over to nfc_target.ats in nci_activate_target(). The approach is similar to the handling of 'general bytes' within ATR_RES. Replace the hard-coded size of rats_res within struct activation_params_nfca_poll_iso_dep by the equal constant NFC_ATS_MAXSIZE now defined in nfc.h Within NCI, the information corresponds to the 'RATS Response' activation parameter that omits the initial length byte TL. This loses no information and is consistent with our handling of SENSB_RES that also drops the first (constant) byte. Tested with nxp_nci_i2c on a few type A targets including an ICAO 9303 compliant passport. I refrain from the corresponding change to digital_in_recv_ats() to have the few drivers based on digital.h fill nfc_target.ats, as I have no way to test it. That class of drivers appear not to set NFC_ATTR_TARGET_SENSB_RES either. Consider a separate patch to propagate (all) the parameters. Signed-off-by: Juraj Šarinay <juraj@sarinay.com> Link: https://patch.msgid.link/20241103124525.8392-1-juraj@sarinay.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-07posix-timers: Move sequence logic into struct k_itimerThomas Gleixner
The posix timer signal handling uses siginfo::si_sys_private for handling the sequence counter check. That indirection is not longer required and the sequence count value at signal queueing time can be stored in struct k_itimer itself. This removes the requirement of treating siginfo::si_sys_private special as it's now always zero as the kernel does not touch it anymore. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Link: https://lore.kernel.org/all/20241105064213.852619866@linutronix.de
2024-11-06io_uring/napi: add static napi tracking strategyOlivier Langlois
Add the static napi tracking strategy. That allows the user to manually manage the napi ids list for busy polling, and eliminate the overhead of dynamically updating the list from the fast path. Signed-off-by: Olivier Langlois <olivier@trillion01.com> Link: https://lore.kernel.org/r/96943de14968c35a5c599352259ad98f3c0770ba.1728828877.git.olivier@trillion01.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-11-06fs/xattr: add *at family syscallsChristian Göttsche
Add the four syscalls setxattrat(), getxattrat(), listxattrat() and removexattrat(). Those can be used to operate on extended attributes, especially security related ones, either relative to a pinned directory or on a file descriptor without read access, avoiding a /proc/<pid>/fd/<fd> detour, requiring a mounted procfs. One use case will be setfiles(8) setting SELinux file contexts ("security.selinux") without race conditions and without a file descriptor opened with read access requiring SELinux read permission. Use the do_{name}at() pattern from fs/open.c. Pass the value of the extended attribute, its length, and for setxattrat(2) the command (XATTR_CREATE or XATTR_REPLACE) via an added struct xattr_args to not exceed six syscall arguments and not merging the AT_* and XATTR_* flags. [AV: fixes by Christian Brauner folded in, the entire thing rebased on top of {filename,file}_...xattr() primitives, treatment of empty pathnames regularized. As the result, AT_EMPTY_PATH+NULL handling is cheap, so f...(2) can use it] Signed-off-by: Christian Göttsche <cgzones@googlemail.com> Link: https://lore.kernel.org/r/20240426162042.191916-1-cgoettsche@seltendoof.de Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christian Brauner <brauner@kernel.org> CC: x86@kernel.org CC: linux-alpha@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-ia64@vger.kernel.org CC: linux-m68k@lists.linux-m68k.org CC: linux-mips@vger.kernel.org CC: linux-parisc@vger.kernel.org CC: linuxppc-dev@lists.ozlabs.org CC: linux-s390@vger.kernel.org CC: linux-sh@vger.kernel.org CC: sparclinux@vger.kernel.org CC: linux-fsdevel@vger.kernel.org CC: audit@vger.kernel.org CC: linux-arch@vger.kernel.org CC: linux-api@vger.kernel.org CC: linux-security-module@vger.kernel.org CC: selinux@vger.kernel.org [brauner: slight tweaks] Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2024-11-05netlink: typographical error in nlmsg_type constants definitionMaurice Lambert
This commit fix a typographical error in netlink nlmsg_type constants definition in the include/uapi/linux/rtnetlink.h at line 177. The definition is RTM_NEWNVLAN RTM_NEWVLAN instead of RTM_NEWVLAN RTM_NEWVLAN. Signed-off-by: Maurice Lambert <mauricelambert434@gmail.com> Fixes: 8dcea187088b ("net: bridge: vlan: add rtm definitions and dump support") Link: https://patch.msgid.link/20241103223950.230300-1-mauricelambert434@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-05Merge branch 'for-linus' into for-nextTakashi Iwai
Pull 6.12-devel branch for cleanup of USB-audio driver code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-11-05perf/core: Add aux_pause, aux_resume, aux_start_pausedAdrian Hunter
Hardware traces, such as instruction traces, can produce a vast amount of trace data, so being able to reduce tracing to more specific circumstances can be useful. The ability to pause or resume tracing when another event happens, can do that. Add ability for an event to "pause" or "resume" AUX area tracing. Add aux_pause bit to perf_event_attr to indicate that, if the event happens, the associated AUX area tracing should be paused. Ditto aux_resume. Do not allow aux_pause and aux_resume to be set together. Add aux_start_paused bit to perf_event_attr to indicate to an AUX area event that it should start in a "paused" state. Add aux_paused to struct hw_perf_event for AUX area events to keep track of the "paused" state. aux_paused is initialized to aux_start_paused. Add PERF_EF_PAUSE and PERF_EF_RESUME modes for ->stop() and ->start() callbacks. Call as needed, during __perf_event_output(). Add aux_in_pause_resume to struct perf_buffer to prevent races with the NMI handler. Pause/resume in NMI context will miss out if it coincides with another pause/resume. To use aux_pause or aux_resume, an event must be in a group with the AUX area event as the group leader. Example (requires Intel PT and tools patches also): $ perf record --kcore -e intel_pt/aux-action=start-paused/k,syscalls:sys_enter_newuname/aux-action=resume/,syscalls:sys_exit_newuname/aux-action=pause/ uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.043 MB perf.data ] $ perf script --call-trace uname 30805 [000] 24001.058782799: name: 0x7ffc9c1865b0 uname 30805 [000] 24001.058784424: psb offs: 0 uname 30805 [000] 24001.058784424: cbr: 39 freq: 3904 MHz (139%) uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) debug_smp_processor_id uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) __x64_sys_newuname uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) down_read uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) __cond_resched uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) preempt_count_add uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) in_lock_functions uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) preempt_count_sub uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) up_read uname 30805 [000] 24001.058784629: ([kernel.kallsyms]) preempt_count_add uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) in_lock_functions uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) preempt_count_sub uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) _copy_to_user uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) syscall_exit_to_user_mode uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) syscall_exit_work uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) perf_syscall_exit uname 30805 [000] 24001.058784838: ([kernel.kallsyms]) debug_smp_processor_id uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_trace_buf_alloc uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_swevent_get_recursion_context uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) debug_smp_processor_id uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) debug_smp_processor_id uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_tp_event uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_trace_buf_update uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) tracing_gen_ctx_irq_test uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_swevent_event uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __perf_event_account_interrupt uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __this_cpu_preempt_check uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_event_output_forward uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) perf_event_aux_pause uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) ring_buffer_get uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __rcu_read_lock uname 30805 [000] 24001.058785046: ([kernel.kallsyms]) __rcu_read_unlock uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) pt_event_stop uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) debug_smp_processor_id uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) debug_smp_processor_id uname 30805 [000] 24001.058785254: ([kernel.kallsyms]) native_write_msr uname 30805 [000] 24001.058785463: ([kernel.kallsyms]) native_write_msr uname 30805 [000] 24001.058785639: 0x0 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: James Clark <james.clark@arm.com> Link: https://lkml.kernel.org/r/20241022155920.17511-3-adrian.hunter@intel.com
2024-11-05media: uapi: Add MEDIA_BUS_FMT_RGB101010_1X7X5_{SPWG, JEIDA}Liu Ying
Add two media bus formats that identify 30-bit RGB pixels transmitted by a LVDS link with five differential data pairs, serialized into 7 time slots, using standard SPWG/VESA or JEIDA data mapping. Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241104032806.611890-5-victor.liu@nxp.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-11-05iommu/arm-smmu-v3: Support IOMMU_GET_HW_INFO via struct arm_smmu_hw_infoNicolin Chen
For virtualization cases the IDR/IIDR/AIDR values of the actual SMMU instance need to be available to the VMM so it can construct an appropriate vSMMUv3 that reflects the correct HW capabilities. For userspace page tables these values are required to constrain the valid values within the CD table and the IOPTEs. The kernel does not sanitize these values. If building a VMM then userspace is required to only forward bits into a VM that it knows it can implement. Some bits will also require a VMM to detect if appropriate kernel support is available such as for ATS and BTM. Start a new file and kconfig for the advanced iommufd support. This lets it be compiled out for kernels that are not intended to support virtualization, and allows distros to leave it disabled until they are shipping a matching qemu too. Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Donald Dutile <ddutile@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/5-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com Signed-off-by: Will Deacon <will@kernel.org>
2024-11-05vfio: Remove VFIO_TYPE1_NESTING_IOMMUJason Gunthorpe
This control causes the ARM SMMU drivers to choose a stage 2 implementation for the IO pagetable (vs the stage 1 usual default), however this choice has no significant visible impact to the VFIO user. Further qemu never implemented this and no other userspace user is known. The original description in commit f5c9ecebaf2a ("vfio/iommu_type1: add new VFIO_TYPE1_NESTING_IOMMU IOMMU type") suggested this was to "provide SMMU translation services to the guest operating system" however the rest of the API to set the guest table pointer for the stage 1 and manage invalidation was never completed, or at least never upstreamed, rendering this part useless dead code. Upstream has now settled on iommufd as the uAPI for controlling nested translation. Choosing the stage 2 implementation should be done by through the IOMMU_HWPT_ALLOC_NEST_PARENT flag during domain allocation. Remove VFIO_TYPE1_NESTING_IOMMU and everything under it including the enable_nesting iommu_domain_op. Just in-case there is some userspace using this continue to treat requesting it as a NOP, but do not advertise support any more. Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Donald Dutile <ddutile@redhat.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/1-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com Signed-off-by: Will Deacon <will@kernel.org>
2024-11-05Merge v6.12-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well, and this resolves a merge conflict in: drivers/usb/typec/tcpm/tcpm.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20241101150730.090dc30f@canb.auug.org.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-05Merge 6.12-rc6 into char-misc-nextGreg Kroah-Hartman
We need the char/misc/iio fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-04tools: ynl-gen: de-kdocify enums with no doc for entriesJakub Kicinski
Sometimes the names of the enum entries are self-explanatory or come from standards. Forcing authors to write trivial kdoc for each of such entries seems unreasonable, but kdoc would complain about undocumented entries. Detect enums which only have documentation for the entire type and no documentation for entries. Render their doc as a plain comment. Link: https://patch.msgid.link/20241103165314.1631237-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-05Merge tag 'drm-xe-next-2024-10-31' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next UAPI Changes: - Define and parse OA sync properties (Ashutosh) Driver Changes: - Add caller info to xe_gt_reset_async (Nirmoy) - A large forcewake rework / cleanup (Himal) - A g2h response timeout fix (Badal) - A PTL workaround (Vinay) - Handle unreliable MMIO reads during forcewake (Shuicheng) - Ufence user-space access fixes (Nirmoy) - Annotate flexible arrays (Matthew Brost) - Enable GuC lite restore (Fei) - Prevent GuC register capture on VF (Zhanjun) - Show VFs VRAM / LMEM provisioning summary over debugfs (Michal) - Parallel queues fix on GT reset (Nirmoy) - Move reference grabbing to a job's dma-fence (Matt Brost) - Mark a number of local workqueues WQ_MEM_RECLAIM (Matt Brost) - OA synchronization support (Ashutosh) - Capture all available bits of GuC timestamp to GuC log (John) - Increase readability of guc_info debugfs (John) - Add a mmio barrier before GGTT invalidate (Matt Brost) - Don't short-circuit TDR on jobs not started (Matt Brost) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZyNvA_vZZYR-1eWE@fedora
2024-11-05Merge tag 'drm-msm-next-2024-10-28' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Updates for v6.13 Core: - Switch to aperture_remove_all_conflicting_devices() - Simplify msm_disp_state_dump_regs() DPU: - Add SA8775P support - Add (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support - Enable support for larger framebuffers (required for X.Org working with several outputs) - Dropped LM_3, LM_4 (MSM8998, SDM845) - Fixed DSPP_3 routing on SDM845 DP: - Add SA8775P support HDMI: - Mark two arrays as const in MSM8998 HDMI PHY driver GPU: - a7xx preemption support - Adreno A663 support - Typos fixes, etc - Fix excessive stack usage in a6xx GMU Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGt7k8zDHsg2Uzx9apzyQMut8XdLXMQSRNn7WArdPUV5Qw@mail.gmail.com
2024-11-04RDMA/nldev: Add IB device and net device rename eventsChiara Meiohas
Implement event sending for IB device rename and IB device port associated netdevice rename. In iproute2, rdma monitor displays the IB device name, port and the netdevice name when displaying event info. Since users can modiy these names, we track and notify on renaming events. Note: In order to receive netdevice rename events, drivers must use the ib_device_set_netdev() API when attaching net devices to IB devices. $ rdma monitor $ rmmod mlx5_ib [UNREGISTER] dev 1 rocep8s0f1 [UNREGISTER] dev 0 rocep8s0f0 $ modprobe mlx5_ib [REGISTER] dev 2 mlx5_0 [NETDEV_ATTACH] dev 2 mlx5_0 port 1 netdev 4 eth2 [REGISTER] dev 3 mlx5_1 [NETDEV_ATTACH] dev 3 mlx5_1 port 1 netdev 5 eth3 [RENAME] dev 2 rocep8s0f0 [RENAME] dev 3 rocep8s0f1 $ devlink dev eswitch set pci/0000:08:00.0 mode switchdev [UNREGISTER] dev 2 rocep8s0f0 [REGISTER] dev 4 mlx5_0 [NETDEV_ATTACH] dev 4 mlx5_0 port 30 netdev 4 eth2 [RENAME] dev 4 rdmap8s0f0 $ echo 4 > /sys/class/net/eth2/device/sriov_numvfs [NETDEV_ATTACH] dev 4 rdmap8s0f0 port 2 netdev 7 eth4 [NETDEV_ATTACH] dev 4 rdmap8s0f0 port 3 netdev 8 eth5 [NETDEV_ATTACH] dev 4 rdmap8s0f0 port 4 netdev 9 eth6 [NETDEV_ATTACH] dev 4 rdmap8s0f0 port 5 netdev 10 eth7 [REGISTER] dev 5 mlx5_0 [NETDEV_ATTACH] dev 5 mlx5_0 port 1 netdev 11 eth8 [REGISTER] dev 6 mlx5_1 [NETDEV_ATTACH] dev 6 mlx5_1 port 1 netdev 12 eth9 [RENAME] dev 5 rocep8s0f0v0 [RENAME] dev 6 rocep8s0f0v1 [REGISTER] dev 7 mlx5_0 [NETDEV_ATTACH] dev 7 mlx5_0 port 1 netdev 13 eth10 [RENAME] dev 7 rocep8s0f0v2 [REGISTER] dev 8 mlx5_0 [NETDEV_ATTACH] dev 8 mlx5_0 port 1 netdev 14 eth11 [RENAME] dev 8 rocep8s0f0v3 $ ip link set eth2 name myeth2 [NETDEV_RENAME] netdev 4 myeth2 $ ip link set eth1 name myeth1 ** no events received, because eth1 is not attached to an IB device ** Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com> Link: https://patch.msgid.link/093c978ef2766fd3ab4ff8798eeb68f2f11582f6.1730367038.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-11-04RDMA/mlx5: Support OOO RX WQE consumptionEdward Srouji
Support QP with out-of-order (OOO) capabilities enabled. This allows WRs on the receiver side of the QP to be consumed OOO, permitting the sender side to transmit messages without guaranteeing arrival order on the receiver side. When enabled, the completion ordering of WRs remains in-order, regardless of the Receive WRs consumption order. RDMA Read and RDMA Atomic operations on the responder side continue to be executed in-order, while the ordering of data placement for RDMA Write and Send operations is not guaranteed. Atomic operations larger than 8 bytes are currently not supported. Therefore, when this feature is enabled, the created QP restricts its atomic support to 8 bytes at most. In addition, when querying the device, a new flag is returned in response to indicate that the Kernel supports OOO QP. Signed-off-by: Edward Srouji <edwards@nvidia.com> Reviewed-by: Yishai Hadas <yishaih@nvidia.com> Link: https://patch.msgid.link/06ac609a5f358c8fb0a090d22c61a2f9329d82e6.1725362773.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-11-04Backmerge v6.12-rc6 of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge Linus tree for some drm-fixes needed for msm and xe merges. Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-11-03iio: Add channel type for attentionRicardo Ribalda
Add a new channel type representing if the user's attention state to the the system. This usually means if the user is looking at the screen or not. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://patch.msgid.link/20241101-hpd-v3-3-e9c80b7c7164@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-03UAPI: ethtool: Use __struct_group() in struct ethtool_link_settingsGustavo A. R. Silva
Use the `__struct_group()` helper to create a new tagged `struct ethtool_link_settings_hdr`. This structure groups together all the members of the flexible `struct ethtool_link_settings` except the flexible array. As a result, the array is effectively separated from the rest of the members without modifying the memory layout of the flexible structure. This new tagged struct will be used to fix problematic declarations of middle-flex-arrays in composite structs[1]. [1] https://git.kernel.org/linus/d88cabfd9abc Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://patch.msgid.link/9e9fb0bd72e5ba1e916acbb4995b1e358b86a689.1730238285.git.gustavoars@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-03dpll: add clock quality level attribute and opJiri Pirko
In order to allow driver expose quality level of the clock it is running, introduce a new netlink attr with enum to carry it to the userspace. Also, introduce an op the dpll netlink code calls into the driver to obtain the value. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20241030081157.966604-2-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-02io_uring: add support for hybrid IOPOLLhexue
A new hybrid poll is implemented on the io_uring layer. Once an IO is issued, it will not poll immediately, but rather block first and re-run before IO complete, then poll to reap IO. While this poll method could be a suboptimal solution when running on a single thread, it offers performance lower than regular polling but higher than IRQ, and CPU utilization is also lower than polling. To use hybrid polling, the ring must be setup with both the IORING_SETUP_IOPOLL and IORING_SETUP_HYBRID)IOPOLL flags set. Hybrid polling has the same restrictions as IOPOLL, in that commands must explicitly support it. Signed-off-by: hexue <xue01.he@samsung.com> Link: https://lore.kernel.org/r/20241101091957.564220-2-xue01.he@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-11-02io_uring/rsrc: allow cloning with node replacementsJens Axboe
Currently cloning a buffer table will fail if the destination already has a table. But it should be possible to use it to replace existing elements. Add a IORING_REGISTER_DST_REPLACE cloning flag, which if set, will allow the destination to already having a buffer table. If that is the case, then entries designated by offset + nr buffers will be replaced if they already exist. Note that it's allowed to use IORING_REGISTER_DST_REPLACE and not have an existing table, in which case it'll work just like not having the flag set and an empty table - it'll just assign the newly created table for that case. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-11-02io_uring/rsrc: allow cloning at an offsetJens Axboe
Right now buffer cloning is an all-or-nothing kind of thing - either the whole table is cloned from a source to a destination ring, or nothing at all. However, it's not always desired to clone the whole thing. Allow for the application to specify a source and destination offset, and a number of buffers to clone. If the destination offset is non-zero, then allocate sparse nodes upfront. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-11-01Merge tag 'drm-misc-next-2024-10-31' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.13: All of the previous pull request, with MORE! Core Changes: - Update documentation for scheduler start/stop and job init. - Add dedede and sm8350-hdk hardware to ci runs. Driver Changes: - Small fixes and cleanups to panfrost, omap, nouveau, ivpu, zynqmp, v3d, panthor docs, and leadtek-ltk050h3146w. - Crashdump support for qaic. - Support DP compliance in zynqmp. - Add Samsung S6E88A0-AMS427AP24 panel. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/deeef745-f3fb-4e85-a9d0-e8d38d43c1cf@linux.intel.com
2024-11-01f2fs: introduce device aliasing fileDaeho Jeong
F2FS should understand how the device aliasing file works and support deleting the file after use. A device aliasing file can be created by mkfs.f2fs tool and it can map the whole device with an extent, not using node blocks. The file space should be pinned and normally used for read-only usages. Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Chao Yu <chao@kernel.org> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2024-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.12-rc6). Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c cbe84e9ad5e2 ("wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd") 188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links") https://lore.kernel.org/all/20241028123621.7bbb131b@canb.auug.org.au/ net/mac80211/cfg.c c4382d5ca1af ("wifi: mac80211: update the right link for tx power") 8dd0498983ee ("wifi: mac80211: Fix setting txpower with emulate_chanctx") drivers/net/ethernet/intel/ice/ice_ptp_hw.h 6e58c3310622 ("ice: fix crash on probe for DPLL enabled E810 LOM") e4291b64e118 ("ice: Align E810T GPIO to other products") ebb2693f8fbd ("ice: Read SDP section from NVM for pin definitions") ac532f4f4251 ("ice: Cleanup unused declarations") https://lore.kernel.org/all/20241030120524.1ee1af18@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-30accel/ivpu: Remove copy engine supportAndrzej Kacprowski
Copy engine was deprecated by the FW and is no longer supported. Compute engine includes all copy engine functionality and should be used instead. This change does not affect user space as the copy engine was never used outside of a couple of tests. Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-4-jacek.lawrynowicz@linux.intel.com
2024-10-29Merge tag 'wireless-next-2024-10-25' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.13 The first -next "new features" pull request for v6.13. This is a big one as we have not been able to send one earlier. We have also some patches affecting other subsystems: in staging we deleted the rtl8192e driver and in debugfs added a new interface to save struct file_operations memory; both were acked by GregKH. Because of the lib80211/libipw move there were quite a lot of conflicts and to solve those we decided to merge net-next into wireless-next. Major changes: cfg80211/mac80211 * stop exporting wext symbols * new mac80211 op to indicate that a new interface is to be added * support radio separation of multi-band devices Wireless Extensions * move wext spy implementation to libiw * remove iw_public_data from struct net_device brcmfmac * optional LPO clock support ipw2x00 * move remaining lib80211 code into libiw wilc1000 * WILC3000 support rtw89 * RTL8852BE and RTL8852BE-VT BT-coexistence improvements * tag 'wireless-next-2024-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (126 commits) mac80211: Remove NOP call to ieee80211_hw_config wifi: iwlwifi: work around -Wenum-compare-conditional warning wifi: mac80211: re-order assigning channel in activate links wifi: mac80211: convert debugfs files to short fops debugfs: add small file operations for most files wifi: mac80211: remove misleading j_0 construction parts wifi: mac80211_hwsim: use hrtimer_active() wifi: mac80211: refactor BW limitation check for CSA parsing wifi: mac80211: filter on monitor interfaces based on configured channel wifi: mac80211: refactor ieee80211_rx_monitor wifi: mac80211: add support for the monitor SKIP_TX flag wifi: cfg80211: add monitor SKIP_TX flag wifi: mac80211: add flag to opt out of virtual monitor support wifi: cfg80211: pass net_device to .set_monitor_channel wifi: mac80211: remove status->ampdu_delimiter_crc wifi: cfg80211: report per wiphy radio antenna mask wifi: mac80211: use vif radio mask to limit creating chanctx wifi: mac80211: use vif radio mask to limit ibss scan frequencies wifi: cfg80211: add option for vif allowed radios wifi: iwlwifi: allow IWL_FW_CHECK() with just a string ... ==================== Link: https://patch.msgid.link/20241025170705.5F6B2C4CEC3@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-29io_uring/nop: add support for testing registered files and buffersJens Axboe
Useful for testing performance/efficiency impact of registered files and buffers, vs (particularly) non-registered files. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-10-29io_uring: add support for fixed wait regionsJens Axboe
Generally applications have 1 or a few waits of waiting, yet they pass in a struct io_uring_getevents_arg every time. This needs to get copied and, in turn, the timeout value needs to get copied. Rather than do this for every invocation, allow the application to register a fixed set of wait regions that can simply be indexed when asking the kernel to wait on events. At ring setup time, the application can register a number of these wait regions and initialize region/index 0 upfront: struct io_uring_reg_wait *reg; reg = io_uring_setup_reg_wait(ring, nr_regions, &ret); /* set timeout and mark as set, sigmask/sigmask_sz as needed */ reg->ts.tv_sec = 0; reg->ts.tv_nsec = 100000; reg->flags = IORING_REG_WAIT_TS; where nr_regions >= 1 && nr_regions <= PAGE_SIZE / sizeof(*reg). The above initializes index 0, but 63 other regions can be initialized, if needed. Now, instead of doing: struct __kernel_timespec timeout = { .tv_nsec = 100000, }; io_uring_submit_and_wait_timeout(ring, &cqe, nr, &t, NULL); to wait for events for each submit_and_wait, or just wait, operation, it can just reference the above region at offset 0 and do: io_uring_submit_and_wait_reg(ring, &cqe, nr, 0); to achieve the same goal of waiting 100usec without needing to copy both struct io_uring_getevents_arg (24b) and struct __kernel_timeout (16b) for each invocation. Struct io_uring_reg_wait looks as follows: struct io_uring_reg_wait { struct __kernel_timespec ts; __u32 min_wait_usec; __u32 flags; __u64 sigmask; __u32 sigmask_sz; __u32 pad[3]; __u64 pad2[2]; }; embedding the timeout itself in the region, rather than passing it as a pointer as well. Note that the signal mask is still passed as a pointer, both for compatability reasons, but also because there doesn't seem to be a lot of high frequency waits scenarios that involve setting and resetting the signal mask for each wait. The application is free to modify any region before a wait call, or it can use keep multiple regions with different settings to avoid needing to modify the same one for wait calls. Up to a page size of regions is mapped by default, allowing PAGE_SIZE / 64 available regions for use. The registered region must fit within a page. On a 4kb page size system, that allows for 64 wait regions if a full page is used, as the size of struct io_uring_reg_wait is 64b. The region registered must be aligned to io_uring_reg_wait in size. It's valid to register less than 64 entries. In network performance testing with zero-copy, this reduced the time spent waiting on the TX side from 3.12% to 0.3% and the RX side from 4.4% to 0.3%. Wait regions are fixed for the lifetime of the ring - once registered, they are persistent until the ring is torn down. The regions support minimum wait timeout as well as the regular waits. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-10-29io_uring/register: add IORING_REGISTER_RESIZE_RINGSJens Axboe
Once a ring has been created, the size of the CQ and SQ rings are fixed. Usually this isn't a problem on the SQ ring side, as it merely controls the available number of requests that can be submitted in a single system call, and there's rarely a need to change that. For the CQ ring, it's a different story. For most efficient use of io_uring, it's important that the CQ ring never overflows. This means that applications must size it for the worst case scenario, which can be wasteful. Add IORING_REGISTER_RESIZE_RINGS, which allows an application to resize the existing rings. It takes a struct io_uring_params argument, the same one which is used to setup the ring initially, and resizes rings according to the sizes given. Certain properties are always inherited from the original ring setup, like SQE128/CQE32 and other setup options. The implementation only allows flag associated with how the CQ ring is sized and clamped. Existing unconsumed SQE and CQE entries are copied as part of the process. If either the SQ or CQ resized destination ring cannot hold the entries already present in the source rings, then the operation is failed with -EOVERFLOW. Any register op holds ->uring_lock, which prevents new submissions, and the internal mapping holds the completion lock as well across moving CQ ring state. To prevent races between mmap and ring resizing, add a mutex that's solely used to serialize ring resize and mmap. mmap_sem can't be used here, as as fork'ed process may be doing mmaps on the ring as well. The ctx->resize_lock is held across mmap operations, and the resize will grab it before swapping out the already mapped new data. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-10-29io_uring/msg_ring: add support for sending a sync messageJens Axboe
Normally MSG_RING requires both a source and a destination ring. But some users don't always have a ring avilable to send a message from, yet they still need to notify a target ring. Add support for using io_uring_register(2) without having a source ring, using a file descriptor of -1 for that. Internally those are called blind registration opcodes. Implement IORING_REGISTER_SEND_MSG_RING as a blind opcode, which simply takes an sqe that the application can put on the stack and use the normal liburing helpers to initialize it. Then the app can call: io_uring_register(-1, IORING_REGISTER_SEND_MSG_RING, &sqe, 1); and get the same behavior in terms of the target, where a CQE is posted with the details given in the sqe. For now this takes a single sqe pointer argument, and hence arg must be set to that, and nr_args must be 1. Could easily be extended to take an array of sqes, but for now let's keep it simple. Link: https://lore.kernel.org/r/20240924115932.116167-3-axboe@kernel.dk Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-10-29xfrm: Add support for per cpu xfrm state handling.Steffen Klassert
Currently all flows for a certain SA must be processed by the same cpu to avoid packet reordering and lock contention of the xfrm state lock. To get rid of this limitation, the IETF standardized per cpu SAs in RFC 9611. This patch implements the xfrm part of it. We add the cpu as a lookup key for xfrm states and a config option to generate acquire messages for each cpu. With that, we can have on each cpu a SA with identical traffic selector so that flows can be processed in parallel on all cpus. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Tested-by: Antony Antony <antony.antony@secunet.com> Tested-by: Tobias Brunner <tobias@strongswan.org>
2024-10-29iommu: Add new flag to explictly request PASID capable domainJason Gunthorpe
Introduce new flag (IOMMU_HWPT_ALLOC_PASID) to domain_alloc_users() ops. If IOMMU supports PASID it will allocate domain. Otherwise return error. In error path check for -EOPNOTSUPP and try to allocate non-PASID domain so that DMA-API mode work fine for drivers which does not support PASID as well. Also modify __iommu_group_alloc_default_domain() to call iommu_paging_domain_alloc_flags() with appropriate flag when allocating paging domain. Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca> Co-developed-by: Vasant Hegde <vasant.hegde@amd.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20241028093810.5901-4-vasant.hegde@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-10-29Merge tag 'amd-drm-next-6.13-2024-10-25' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.13-2024-10-25: amdgpu: - SDMA queue reset support - SMU 13.0.6 updates - Add debugfs interface to help limit jpeg queue scheduling for testing - JPEG 4.0.3 updates - Initial runtime repartitioning support - GFX9 fixes - Misc code cleanups - Rework IP structures to better handle multiple instances of an IP - DML updates - DSC fixes - HDR fixes - Brightness control updates - Runtime pm cleanup - DMCUB fixes - DCN 3.5 updates - Struct drm_edid cleanup - Fetch EDID from _DDC if available - Ring noop optimizations - MES logging fixes - 3DLUT fixes - DCN 4.x fixes - SMU 13.x fixes - Fixes for set_soft_freq_range() - ACPI fixes - SMU 14.x updates - PSR-SU fixes - fdinfo cleanup - DCN documentation updates amdkfd: - Misc code cleanups - Increase event FIFO size - Copy wave state fixes for SDMA radeon: - Fix possible overflow in packet3 check - Late init connector fix - Always set GEM function pointer Documentation: - Update drm-memory documentation From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241025132336.2416913-1-alexander.deucher@amd.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-10-28UAPI/ioctl: Improve parameter name of ioctl request definition helpersUwe Kleine-König
The third parameter to _IOR et al is a type name, not a size. So the parameter being named "size" is irritating. Rename it to "argtype" instead to reduce confusion. There is a very minor chance that this breaks stuff. It only hurts however if there is a variable (or macro) in userspace that is called "argtype" *and* it's used in the parameters of _IOR and friends. IMHO this is negligible because usually definitions making use of these macros are provided by kernel headers (i.e. us) or if they are replicated in userspace code, they are replicated and so supposed to match the kernel definitions (e.g. to make them usable by programs without the need to update the kernel headers used to compile the program). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-10-28drm/amdkfd: flag per-queue reset support for gfx9Jonathan Kim
Flag KFD support for per-queue reset on GFX9 devices. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28iommufd: Add IOMMU_IOAS_MAP_FILESteve Sistare
Define the IOMMU_IOAS_MAP_FILE ioctl interface, which allows a user to register memory by passing a memfd plus offset and length. Implement it using the memfd_pin_folios() kAPI. Link: https://patch.msgid.link/r/1729861919-234514-8-git-send-email-steven.sistare@oracle.com Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-25Merge tag 'sound-6.12-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "The majority of changes here are about ASoC. There are two core changes in ASoC (the bump of minimal topology ABI version and the fix for references of components in DAPM code), and others are mostly various device-specific fixes for SoundWire, AMD, Intel, SOF, Qualcomm and FSL, in addition to a few usual HD-audio quirks and fixes" * tag 'sound-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits) ALSA: hda/realtek: Update default depop procedure ASoC: qcom: sc7280: Fix missing Soundwire runtime stream alloc ASoC: fsl_micfil: Add sample rate constraint ASoC: rt722-sdca: increase clk_stop_timeout to fix clock stop issue ALSA: hda/tas2781: select CRC32 instead of CRC32_SARWATE ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593 ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size() ASoC: fsl_micfil: Add a flag to distinguish with different volume control types ASoC: codecs: lpass-rx-macro: fix RXn(rx,n) macro for DSM_CTL and SEC7 regs ASoC: Change my e-mail to gmail ASoC: Intel: soc-acpi: lnl: Add match entry for TM2 laptops ASoC: amd: yc: Fix non-functional mic on ASUS E1404FA ASoC: SOF: Intel: hda: Always clean up link DMA during stop soundwire: intel_ace2x: Send PDI stream number during prepare ASoC: SOF: Intel: hda: Handle prepare without close for non-HDA DAI's ASoC: SOF: ipc4-topology: Do not set ALH node_id for aggregated DAIs MAINTAINERS: Update maintainer list for MICROCHIP ASOC, SSC and MCP16502 drivers ASoC: qcom: Select missing common Soundwire module code on SDM845 ASoC: fsl_esai: change dev_warn to dev_dbg in irq handler ASoC: rsnd: Fix probe failure on HiHope boards due to endpoint parsing ...
2024-10-25ALSA: compress_offload: introduce accel operation modeJaroslav Kysela
There is a requirement to expose the audio hardware that accelerates various tasks for user space such as sample rate converters, compressed stream decoders, etc. This is description for the API extension for the compress ALSA API which is able to handle "tasks" that are not bound to real-time operations and allows for the serialization of operations. For details, refer to "compress-accel.rst" document. Cc: Mark Brown <broonie@kernel.org> Cc: Shengjiu Wang <shengjiu.wang@gmail.com> Cc: Nicolas Dufresne <nicolas@ndufresne.ca> Cc: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Shengjiu Wang <shengjiu.wang@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20241002093904.1809799-1-perex@perex.cz
2024-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR. No conflicts and no adjacent changes. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfAlexei Starovoitov
Cross-merge bpf fixes after downstream PR. No conflicts. Adjacent changes in: include/linux/bpf.h include/uapi/linux/bpf.h kernel/bpf/btf.c kernel/bpf/helpers.c kernel/bpf/syscall.c kernel/bpf/verifier.c kernel/trace/bpf_trace.c mm/slab_common.c tools/include/uapi/linux/bpf.h tools/testing/selftests/bpf/Makefile Link: https://lore.kernel.org/all/20241024215724.60017-1-daniel@iogearbox.net/ Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-10-24firmware/psci: Add definitions for PSCI v1.3 specificationDavid Woodhouse
The v1.3 PSCI spec (https://developer.arm.com/documentation/den0022) adds the SYSTEM_OFF2 function. Add definitions for it and its hibernation type parameter. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Miguel Luis <miguel.luis@oracle.com> Link: https://lore.kernel.org/r/20241019172459.2241939-2-dwmw2@infradead.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
generated by cgit (git 2.34.1) at 2025-09-11 18:08:14 +0000