summaryrefslogtreecommitdiff
path: root/include/video/da8xx-fb.h
AgeCommit message (Collapse)Author
2013-08-09video: da8xx-fb: improve readability of codeDarren Etheridge
Change the lcd_disable_raster funtion from using a bool to an enum as the function is very confusing with the current api. This helps make it clearer what the parameter is really doing. Signed-off-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27da8xx-fb: cleanup LCDC configurationsManjunathappa, Prakash
Configure below LCDC configurations to optimal values, also have an option configure these optional parameters for platform. 1) AC bias configuration: Required only for passive panels 2) Dma_burst_size: 3) FIFO_DMA_DELAY: 4) FIFO threshold: Does not apply for da830 LCDC. Patch is verified for 16bpp and 24bpp configurations on da830, da850 and am335x EVMs. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-27da8xx-fb: adopt fb_videomode data for panel informationManjunathappa, Prakash
Adopt fb_videomode data instead of defining driver private structure to hold panel information. This is the way standard FB drivers maintain the panel information. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-07-29video: da8xx-fb: configure FIFO threshold to reduce underflow errorsManjunathappa, Prakash
Patch works around the below silicon errata: During LCDC initialization, there is the potential for a FIFO underflow condition to occur. A FIFO underflow condition occurs when the input FIFO is completely empty and the LCDC raster controller logic that drives data to the output pins attempts to fetch data from the FIFO. When a FIFO underflow condition occurs, incorrect data will be driven out on the LCDC data pins. Software should poll the FUF bit field in the LCD_STAT register to check if an error condition has occurred or service the interrupt if FUF_EN is enabled when FUF occurs. If the FUF bit field has been set to 1, this will indicate an underflow condition has occurred and then the software should execute a reset of the LCDC via the LPSC. This problem may occur if the LCDC FIFO threshold size (LCDDMA_CTRL[TH_FIFO_READY]) is left at its default value after reset. Increasing the FIFO threshold size will reduce or eliminate underflows. Setting the threshold size to 256 double words or larger is recommended. Above issue is described in section 2.1.3 of silicon errata http://www.ti.com/lit/er/sprz313e/sprz313e.pdf Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2010-11-16fbdev: da8xx: punt duplicated FBIO_WAITFORVSYNC defineMike Frysinger
This is already defined by linux/fb.h now, so punt the duplicate definition from the driver header. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-25fbdev: da8xx/omap-l1xx: implement double bufferingMartin Ambrose
This work includes the following: - Implement handler for FBIO_WAITFORVSYNC ioctl. - Allocate the data and palette buffers separately. A consequence of this is that the palette and data loading is now done in different phases. And that the LCD must be disabled temporarily after the palette is loaded but this will only happen once after init and each time the palette is changed. I think this is OK. - Allocate two (ping and pong) framebuffers from memory. - Add pan_display handler which toggles the LCDC DMA registers between the ping and pong buffers. Signed-off-by: Martin Ambrose <martin@ti.com> Cc: Chaithrika U S <chaithrika@ti.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16davinci: fb: update the driver in preparation for addition of power ↵Chaithrika U S
management features Add a helper function to enable raster. Also add one member in the private data structure to track the current blank status, another function pointer which takes in the platform specific callback function to control panel power. These updates will help in adding suspend/resume and frame buffer blank operation features. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23davinci-fb-frame-buffer-driver-for-ti-da8xx-omap-l1xx-v4Sudhakar Rajashekhara
Since the previous version, return values in ioctl() function have been modified. [akpm@linux-foundation.org: simplify lcd_disable_raster()] Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Signed-off-by: Steve Chen <schen@mvista.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23davinci: fb: Frame Buffer driver for TI DA8xx/OMAP-L1xxSudhakar Rajashekhara
Add LCD controller (LCDC) driver for TI's DA8xx/OMAP-L1xx architecture. LCDC specifications can be found at http://www.ti.com/litv/pdf/sprufm0a. LCDC on DA8xx consists of two independent controllers, the Raster Controller and the LCD Interface Display Driver (LIDD) controller. LIDD further supports character and graphic displays. This patch adds support for the graphic display (Sharp LQ035Q3DG01) found on the DA830 based EVM. The EVM details can be found at: http://support.spectrumdigital.com/boards/dskda830/revc/. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Signed-off-by: Steve Chen <schen@mvista.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> DESC davinci-fb-frame-buffer-driver-for-ti-da8xx-omap-l1xx-fix EDESC From: Andrew Morton <akpm@linux-foundation.org> fix kconfig indenting Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Cc: Steve Chen <schen@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>