summaryrefslogtreecommitdiff
path: root/include/video/omap-panel-data.h
AgeCommit message (Collapse)Author
2016-06-03omapdss: omap-panel-data.h: Remove connector_type from atv pdataPeter Ujfalusi
The driver only supports composite connection when booted in legacy mode so the omap_dss_venc_type can be dropped from the pdata. At the same time the video/omapdss.h include can be removed as it is no longer needed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapdss: omap-panel-data.h: Remove struct omap_dss_device declarationPeter Ujfalusi
The omap_dss_device is not needed by anything in the header file. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: encoder-tfp410: Remove legacy boot supportPeter Ujfalusi
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: connector-dvi: Remove legacy boot supportPeter Ujfalusi
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: connector-hdmi: Remove legacy boot supportPeter Ujfalusi
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: panel-dsi-cm: Remove legacy boot supportPeter Ujfalusi
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: panel-lgphilips-lb035q02: Remove legacy boot supportPeter Ujfalusi
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: panel-sharp-ls037v7dw01: Remove legacy boot supportPeter Ujfalusi
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: panel-tpo-td043mtea1: Remove legacy boot supportPeter Ujfalusi
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: panel-nec-nl8048hl11: Remove legacy boot supportPeter Ujfalusi
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-06-03omapfb: panel-tpo-td028ttec1: Remove legacy boot supportPeter Ujfalusi
The panel is not used by any legacy board files so the legacy (pdata) boot support can be dropped. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2016-03-03drm/omap: tpd12s015: remove platform data supportManisha Agrawal
All devices using tpd12s015 driver are doing DT boot. No need of further supporting the platform data. This patch removes support for platform data. Signed-off-by: Manisha Agrawal <manisha.agrawal@ti.com> [tomi.valkeinen@ti.com: minor adjustments] Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-10-31omapdss: Add new panel driver for Topolly td028ttec1 LCD.Marek Belisko
Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> [tomi.valkeinen@ti.com: made a few funcs static] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-08-29OMAPDSS: remove all old panel driversTomi Valkeinen
The board files now use the new panel drivers, making the old panel drivers obsolete. Remove the old panel drivers, Kconfig and Makefile entries, and the panels' platform data structs. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
2013-06-17OMAPDSS: Add NEC NL8048HL11 panel driverTomi Valkeinen
Add NEC NL8048HL11 panel driver which uses the new DSS device model and DSS ops. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: Add TPO TD043MTEA1 panel driverTomi Valkeinen
Add TPO TD043MTEA1 panel driver which uses the new DSS device model and DSS ops. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com>
2013-06-17OMAPDSS: Add Sharp LS037V7DW01 panel driverTomi Valkeinen
Add Sharp LS037V7DW01 panel driver which uses the new DSS device model and DSS ops. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: Add LG.Philips LB035Q02 panel driverTomi Valkeinen
Add LG.Philips LB035Q02 panel driver which uses the new DSS device model and DSS ops. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: Add Sony ACX565AKM panel driverTomi Valkeinen
Add Sony ACX565AKM panel driver which uses the new DSS device model and DSS ops. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
2013-06-17OMAPDSS: Add new DSI Command Mode panel driverTomi Valkeinen
Add DSI Command Mode panel driver which uses the new DSS device model and DSS ops. This driver only supports a very basic set of features which should be common to all DSI command mode panels. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: Add new simple DPI panel driverTomi Valkeinen
Add simple DPI Panel driver which uses the new DSS device model and DSS ops. A "simple" panel means one that does not require any special setup. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: Add new Analog TV Connector driverTomi Valkeinen
Add Analog TV Connector driver which uses the new DSS device model and DSS ops. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: Add new HDMI Connector driverTomi Valkeinen
Add HDMI Connector driver which uses the new DSS device model and DSS ops. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: Add new DVI Connector driverTomi Valkeinen
Add DVI Connector driver which uses the new DSS device model and DSS ops. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: Add new TPD12S015 Encoder driverTomi Valkeinen
Add TPD12S015 HDMI ESD protection and level shifter encoder driver which uses the new DSS device model and DSS ops. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-06-17OMAPDSS: Add new TFP410 Encoder driverTomi Valkeinen
Add TFP410 DPI-to-DVI Encoder driver which uses the new DSS device model and DSS ops. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-04-03OMAPDSS: n8x0: remove platform backlight callsTomi Valkeinen
The n8x0 panel contains support to call platform backlight functions. These are not used by any board, and can be removed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com>
2013-04-03OMAPDSS: add fields to panels' platform dataTomi Valkeinen
Forthcoming panel patches will change the panel drivers to use platform data to pass panel's gpios to the panel driver. This patch adds the required fields and platform data structs to the omap-panel-data.h file, so that the board files can be changed independently of the panel driver changes. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com>
2013-04-03OMAPDSS: panels: keep platform data of all panels in a single headerArchit Taneja
Structs for platform data of omapdss panels are found in headers in the 'include/video/' path. Board files populate these structs with platform specific values, and the panel driver uses these to configure the panel. Currently, each panel has it's own header in the above path. Move all the omapdss panel platform data structs to a single header omap-panel-data.h. This is useful because: - All other omapdss panel drivers will be modified to use platform data. This would lead to a lot of panel headers usable only by omapdss. A lot of these platform data structs are trivial, and don't really need a separate header. - Platform data would be eventually removed, and platform information would be passed via device tree. Therefore, omapdss panel platform data structs are temporary, and will be easier to remove if they are all in the same header. - All board files will have to include the same header to configure a panel's platform data, that makes the board files more consistent. Signed-off-by: Archit Taneja <archit@ti.com>