| Age | Commit message (Collapse) | Author |
|---|
|
Merge misc fixes from Andrew Morton:
"13 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, thp: do not cause memcg oom for thp
mm/vmscan: wake up flushers for legacy cgroups too
Revert "mm: page_alloc: skip over regions of invalid pfns where possible"
mm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink()
mm/thp: do not wait for lock_page() in deferred_split_scan()
mm/khugepaged.c: convert VM_BUG_ON() to collapse fail
x86/mm: implement free pmd/pte page interfaces
mm/vmalloc: add interfaces to free unmapped page table
h8300: remove extraneous __BIG_ENDIAN definition
hugetlbfs: check for pgoff value overflow
lockdep: fix fs_reclaim warning
MAINTAINERS: update Mark Fasheh's e-mail
mm/mempolicy.c: avoid use uninitialized preferred_node
|
|
This reverts commit b92df1de5d28 ("mm: page_alloc: skip over regions of
invalid pfns where possible"). The commit is meant to be a boot init
speed up skipping the loop in memmap_init_zone() for invalid pfns.
But given some specific memory mapping on x86_64 (or more generally
theoretically anywhere but on arm with CONFIG_HAVE_ARCH_PFN_VALID) the
implementation also skips valid pfns which is plain wrong and causes
'kernel BUG at mm/page_alloc.c:1389!'
crash> log | grep -e BUG -e RIP -e Call.Trace -e move_freepages_block -e rmqueue -e freelist -A1
kernel BUG at mm/page_alloc.c:1389!
invalid opcode: 0000 [#1] SMP
--
RIP: 0010: move_freepages+0x15e/0x160
--
Call Trace:
move_freepages_block+0x73/0x80
__rmqueue+0x263/0x460
get_page_from_freelist+0x7e1/0x9e0
__alloc_pages_nodemask+0x176/0x420
--
crash> page_init_bug -v | grep RAM
<struct resource 0xffff88067fffd2f8> 1000 - 9bfff System RAM (620.00 KiB)
<struct resource 0xffff88067fffd3a0> 100000 - 430bffff System RAM ( 1.05 GiB = 1071.75 MiB = 1097472.00 KiB)
<struct resource 0xffff88067fffd410> 4b0c8000 - 4bf9cfff System RAM ( 14.83 MiB = 15188.00 KiB)
<struct resource 0xffff88067fffd480> 4bfac000 - 646b1fff System RAM (391.02 MiB = 400408.00 KiB)
<struct resource 0xffff88067fffd560> 7b788000 - 7b7fffff System RAM (480.00 KiB)
<struct resource 0xffff88067fffd640> 100000000 - 67fffffff System RAM ( 22.00 GiB)
crash> page_init_bug | head -6
<struct resource 0xffff88067fffd560> 7b788000 - 7b7fffff System RAM (480.00 KiB)
<struct page 0xffffea0001ede200> 1fffff00000000 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096 1048575
<struct page 0xffffea0001ede200> 505736 505344 <struct page 0xffffea0001ed8000> 505855 <struct page 0xffffea0001edffc0>
<struct page 0xffffea0001ed8000> 0 0 <struct pglist_data 0xffff88047ffd9000> 0 <struct zone 0xffff88047ffd9000> DMA 1 4095
<struct page 0xffffea0001edffc0> 1fffff00000400 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096 1048575
BUG, zones differ!
crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b787000 7b788000
PAGE PHYSICAL MAPPING INDEX CNT FLAGS
ffffea0001e00000 78000000 0 0 0 0
ffffea0001ed7fc0 7b5ff000 0 0 0 0
ffffea0001ed8000 7b600000 0 0 0 0 <<<<
ffffea0001ede1c0 7b787000 0 0 0 0
ffffea0001ede200 7b788000 0 0 1 1fffff00000000
Link: http://lkml.kernel.org/r/20180316143855.29838-1-neelx@redhat.com
Fixes: b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns where possible")
Signed-off-by: Daniel Vacek <neelx@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may
create pud/pmd mappings. A kernel panic was observed on arm64 systems
with Cortex-A75 in the following steps as described by Hanjun Guo.
1. ioremap a 4K size, valid page table will build,
2. iounmap it, pte0 will set to 0;
3. ioremap the same address with 2M size, pgd/pmd is unchanged,
then set the a new value for pmd;
4. pte0 is leaked;
5. CPU may meet exception because the old pmd is still in TLB,
which will lead to kernel panic.
This panic is not reproducible on x86. INVLPG, called from iounmap,
purges all levels of entries associated with purged address on x86. x86
still has memory leak.
The patch changes the ioremap path to free unmapped page table(s) since
doing so in the unmap path has the following issues:
- The iounmap() path is shared with vunmap(). Since vmap() only
supports pte mappings, making vunmap() to free a pte page is an
overhead for regular vmap users as they do not need a pte page freed
up.
- Checking if all entries in a pte page are cleared in the unmap path
is racy, and serializing this check is expensive.
- The unmap path calls free_vmap_area_noflush() to do lazy TLB purges.
Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB
purge.
Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which
clear a given pud/pmd entry and free up a page for the lower level
entries.
This patch implements their stub functions on x86 and arm64, which work
as workaround.
[akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub]
Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com
Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings")
Reported-by: Lei Li <lious.lilei@hisilicon.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Wang Xuefeng <wxf.wang@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Chintan Pandya <cpandya@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking fixes from David Miller:
1) Always validate XFRM esn replay attribute, from Florian Westphal.
2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long.
3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul
Triebitz.
4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel
Axtens.
5) Fix some interrupt handling issues in e1000e driver, from Benjamin
Poitier.
6) Use strlcpy() in several ethtool get_strings methods, from Florian
Fainelli.
7) Fix rhlist dup insertion, from Paul Blakey.
8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev.
9) Fix driver unload crash when link is up in smsc911x, from Jeremy
Linton.
10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric
Dumazet.
11) Need to purge the write queue when TCP connections are aborted,
otherwise userspace using MSG_ZEROCOPY can't close the fd. From
Soheil Hassas Yeganeh.
12) Fix double free in error path of team driver, from Arkadi
Sharshevsky.
13) Filter fixes for hv_netvsc driver, from Stephen Hemminger.
14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo
Bianconi.
15) Properly filter out unsupported feature flags in macvlan driver,
from Shannon Nelson.
16) Don't request loading the diag module for a protocol if the protocol
itself is not even registered. From Xin Long.
17) If datagram connect fails in ipv6, make sure the socket state is
consistent afterwards. From Paolo Abeni.
18) Use after free in qed driver, from Dan Carpenter.
19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the
entry. From Sabrina Dubroca.
20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins.
21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita.
22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel.
23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti.
24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli.
25) Memory leak in gemini driver, from Igor Pylypiv.
26) IDR leaks in error paths of tcf_*_init() functions, from Davide
Caratti.
27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun.
28) Missing dev_put() in error path of macsec_newlink(), from Dan
Carpenter.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits)
macsec: missing dev_put() on error in macsec_newlink()
net: dsa: Fix functional dsa-loop dependency on FIXED_PHY
hv_netvsc: common detach logic
hv_netvsc: change GPAD teardown order on older versions
hv_netvsc: use RCU to fix concurrent rx and queue changes
hv_netvsc: disable NAPI before channel close
net/ipv6: Handle onlink flag with multipath routes
ppp: avoid loop in xmit recursion detection code
ipv6: sr: fix NULL pointer dereference when setting encap source address
ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state
net: aquantia: driver version bump
net: aquantia: Implement pci shutdown callback
net: aquantia: Allow live mac address changes
net: aquantia: Add tx clean budget and valid budget handling logic
net: aquantia: Change inefficient wait loop on fw data reads
net: aquantia: Fix a regression with reset on old firmware
net: aquantia: Fix hardware reset when SPI may rarely hangup
s390/qeth: on channel error, reject further cmd requests
s390/qeth: lock read device while queueing next buffer
s390/qeth: when thread completes, wake up all waiters
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes intended for v4.16-rc7:
MMC host:
- dw_mmc: Fix the suspend/resume issue for Exynos5433
- dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit
systems
- dw_mmc: Make PIO mode work when failing with idmac when
dw_mci_reset occurs
- sdhci-acpi: Re-allow IRQ 0 to fix broken probe
MMC core:
- Update EXT_CSD caches to correctly switch partition for ioctl calls
- Fix tracepoint print of blk_addr and blksz
- Disable HPI on broken Micron (Numonyx) eMMC cards"
* tag 'mmc-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-acpi: Fix IRQ 0
mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occurs
mmc: core: Fix tracepoint print of blk_addr and blksz
mmc: core: Disable HPI for certain Micron (Numonyx) eMMC cards
mmc: dw_mmc: exynos: fix the suspend/resume issue for exynos5433
mmc: block: fix updating ext_csd caches on ioctl call
mmc: dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two more fixes (in three patches):
* ath9k_htc doesn't like QoS NDP frames, use regular ones
* hwsim: set up wmediumd for radios created later
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For some phy devices, even though they don't support the MMD extended
register access, it does have some side effect if we are trying to
read/write the MMD registers via indirect method. So introduce general
dummy stubs for MMD register access which these devices can use to avoid
such side effect.
Fixes: b6b5e8a69118 ("gianfar: Disable EEE autoneg by default")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing") added an
argument qos_ok to ieee80211_nullfunc_get to support QoS NDP. Despite
the claim in the commit log "Change all the drivers to *not* allow
QoS NDP for now, even though it looks like most of them should be OK
with that", this commit enables QoS NDP in response to beacons (see
change to mlme.c:ieee80211_send_nullfunc), causing ath9k_htc to lose
IP connectivity. See:
https://patchwork.kernel.org/patch/10241109/
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891060
Introduce a hardware flag to allow such buggy drivers to override the
correct default behaviour of mac80211 of sending QoS NDP packets.
Signed-off-by: Ben Caradoc-Davies <ben@transient.nz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Not much exciting here, almost entirely syzkaller fixes.
This is going to be on ongoing theme for some time, I think. Both
Google and Mellanox are now running syzkaller on different parts of
the user API.
Summary:
- Many bug fixes related to syzkaller from Leon Romanovsky. These are
still for the mlx driver and ucma interface.
- Fix a situation with port reuse for iWarp, discovered during
scale-up testing
- Bug fixes for the profile and restrack patches accepted during this
merge window
- Compile warning cleanups from Arnd, this is apparently the last
warning to make 32 bit builds quiet"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/ucma: Ensure that CM_ID exists prior to access it
RDMA/verbs: Remove restrack entry from XRCD structure
RDMA/ucma: Fix use-after-free access in ucma_close
RDMA/ucma: Check AF family prior resolving address
infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
infiniband: qplib_fp: fix pointer cast
IB/mlx5: Fix cleanup order on unload
RDMA/ucma: Don't allow join attempts for unsupported AF family
RDMA/ucma: Fix access to non-initialized CM_ID object
RDMA/core: Do not use invalid destination in determining port reuse
RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory
IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Two low-impact workqueue commits.
One fixes workqueue creation error path and the other removes the
unused cancel_work()"
* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: remove unused cancel_work()
workqueue: use put_device() instead of kfree()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu fixes from Tejun Heo:
"Late percpu pull request for v4.16-rc6.
- percpu allocator pool replenishing no longer triggers OOM or
warning messages.
Also, the alloc interface now understands __GFP_NORETRY and
__GFP_NOWARN. This is to allow avoiding OOMs from userland
triggered actions like bpf map creation.
Also added cond_resched() in alloc loop.
- perpcu allocation now can be interrupted by kill sigs to avoid
deadlocking OOM killer.
- Added Dennis Zhou as a co-maintainer.
He has rewritten the area map allocator, understands most of the
code base and has been responsive for all bug reports"
* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu_ref: Update doc to dissuade users from depending on internal RCU grace periods
mm: Allow to kill tasks doing pcpu_alloc() and waiting for pcpu_balance_workfn()
percpu: include linux/sched.h for cond_resched()
percpu: add a schedule point in pcpu_balance_workfn()
percpu: allow select gfp to be passed to underlying allocators
percpu: add __GFP_NORETRY semantics to the percpu balancing path
percpu: match chunk allocator declarations with definitions
percpu: add Dennis Zhou as a percpu co-maintainer
|
|
XRCD object is not implemented in the restrack, so lets remove it.
Fixes: 02d8883f520e ("RDMA/restrack: Add general infrastructure to track RDMA resources")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
grace periods
percpu_ref internally uses sched-RCU to implement the percpu -> atomic
mode switching and the documentation suggested that this could be
depended upon. This doesn't seem like a good idea.
* percpu_ref uses sched-RCU which has different grace periods regular
RCU. Users may combine percpu_ref with regular RCU usage and
incorrectly believe that regular RCU grace periods are performed by
percpu_ref. This can lead to, for example, use-after-free due to
premature freeing.
* percpu_ref has a grace period when switching from percpu to atomic
mode. It doesn't have one between the last put and release. This
distinction is subtle and can lead to surprising bugs.
* percpu_ref allows starting in and switching to atomic mode manually
for debugging and other purposes. This means that there may not be
any grace periods from kill to release.
This patch makes it clear that the grace periods are percpu_ref's
internal implementation detail and can't be depended upon by the
users.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Pull KVM fixes from Paolo Bonzini:
"PPC:
- fix bug leading to lost IPIs and smp_call_function_many() lockups
on POWER9
ARM:
- locking fix
- reset fix
- GICv2 multi-source SGI injection fix
- GICv2-on-v3 MMIO synchronization fix
- make the console less verbose.
x86:
- fix device passthrough on AMD SME"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix device passthrough when SME is active
kvm: arm/arm64: vgic-v3: Tighten synchronization for guests using v2 on v3
KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintid
KVM: arm/arm64: Reduce verbosity of KVM init log
KVM: arm/arm64: Reset mapped IRQs on VM reset
KVM: arm/arm64: Avoid vcpu_load for other vcpu ioctls than KVM_RUN
KVM: arm/arm64: vgic: Add missing irq_lock to vgic_mmio_read_pending
KVM: PPC: Book3S HV: Fix trap number return from __kvmppc_vcore_entry
|
|
With reorder header off, received packets are untagged in skb_vlan_untag()
called from within __netif_receive_skb_core(), and later the tag will be
inserted back in vlan_do_receive().
This caused out of order vlan headers when we create a vlan device on top
of another vlan device, because vlan_do_receive() inserts a tag as the
outermost vlan tag. E.g. the outer tag is first removed in skb_vlan_untag()
and inserted back in vlan_do_receive(), then the inner tag is next removed
and inserted back as the outermost tag.
This patch fixes the behaviour by inserting the inner tag at the right
position.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we have a bridge with vlan_filtering on and a vlan device on top of
it, packets would be corrupted in skb_vlan_untag() called from
br_dev_xmit().
The problem sits in skb_reorder_vlan_header() used in skb_vlan_untag(),
which makes use of skb->mac_len. In this function mac_len is meant for
handling rx path with vlan devices with reorder_header disabled, but in
tx path mac_len is typically 0 and cannot be used, which is the problem
in this case.
The current code even does not properly handle rx path (skb_vlan_untag()
called from __netif_receive_skb_core()) with reorder_header off actually.
In rx path single tag case, it works as follows:
- Before skb_reorder_vlan_header()
mac_header data
v v
+-------------------+-------------+------+----
| ETH | VLAN | ETH |
| ADDRS | TPID | TCI | TYPE |
+-------------------+-------------+------+----
<-------- mac_len --------->
<------------->
to be removed
- After skb_reorder_vlan_header()
mac_header data
v v
+-------------------+------+----
| ETH | ETH |
| ADDRS | TYPE |
+-------------------+------+----
<-------- mac_len --------->
This is ok, but in rx double tag case, it corrupts packets:
- Before skb_reorder_vlan_header()
mac_header data
v v
+-------------------+-------------+-------------+------+----
| ETH | VLAN | VLAN | ETH |
| ADDRS | TPID | TCI | TPID | TCI | TYPE |
+-------------------+-------------+-------------+------+----
<--------------- mac_len ---------------->
<------------->
should be removed
<--------------------------->
actually will be removed
- After skb_reorder_vlan_header()
mac_header data
v v
+-------------------+------+----
| ETH | ETH |
| ADDRS | TYPE |
+-------------------+------+----
<--------------- mac_len ---------------->
So, two of vlan tags are both removed while only inner one should be
removed and mac_header (and mac_len) is broken.
skb_vlan_untag() is meant for removing the vlan header at (skb->data - 2),
so use skb->data and skb->mac_header to calculate the right offset.
Reported-by: Brandon Carpenter <brandon.carpenter@cypherpath.com>
Fixes: a6e18ff11170 ("vlan: Fix untag operations of stacked vlans with REORDER_HEADER off")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
- backport-friendly part of lock_parent() race fix
- a fix for an assumption in the heurisic used by path_connected() that
is not true on NFS
- livelock fixes for d_alloc_parallel()
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Teach path_connected to handle nfs filesystems with multiple roots.
fs: dcache: Use READ_ONCE when accessing i_dir_seq
fs: dcache: Avoid livelock between d_alloc_parallel and __d_add
lock_parent() needs to recheck if dentry got __dentry_kill'ed under it
|
|
On nfsv2 and nfsv3 the nfs server can export subsets of the same
filesystem and report the same filesystem identifier, so that the nfs
client can know they are the same filesystem. The subsets can be from
disjoint directory trees. The nfsv2 and nfsv3 filesystems provides no
way to find the common root of all directory trees exported form the
server with the same filesystem identifier.
The practical result is that in struct super s_root for nfs s_root is
not necessarily the root of the filesystem. The nfs mount code sets
s_root to the root of the first subset of the nfs filesystem that the
kernel mounts.
This effects the dcache invalidation code in generic_shutdown_super
currently called shrunk_dcache_for_umount and that code for years
has gone through an additional list of dentries that might be dentry
trees that need to be freed to accomodate nfs.
When I wrote path_connected I did not realize nfs was so special, and
it's hueristic for avoiding calling is_subdir can fail.
The practical case where this fails is when there is a move of a
directory from the subtree exposed by one nfs mount to the subtree
exposed by another nfs mount. This move can happen either locally or
remotely. With the remote case requiring that the move directory be cached
before the move and that after the move someone walks the path
to where the move directory now exists and in so doing causes the
already cached directory to be moved in the dcache through the magic
of d_splice_alias.
If someone whose working directory is in the move directory or a
subdirectory and now starts calling .. from the initial mount of nfs
(where s_root == mnt_root), then path_connected as a heuristic will
not bother with the is_subdir check. As s_root really is not the root
of the nfs filesystem this heuristic is wrong, and the path may
actually not be connected and path_connected can fail.
The is_subdir function might be cheap enough that we can call it
unconditionally. Verifying that will take some benchmarking and
the result may not be the same on all kernels this fix needs
to be backported to. So I am avoiding that for now.
Filesystems with snapshots such as nilfs and btrfs do something
similar. But as the directory tree of the snapshots are disjoint
from one another and from the main directory tree rename won't move
things between them and this problem will not occur.
Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes: 397d425dc26d ("vfs: Test for and handle paths that are unreachable from their mnt_root")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
kvm/arm fixes for 4.16, take 2
- Peace of mind locking fix in vgic_mmio_read_pending
- Allow hw-mapped interrupts to be reset when the VM resets
- Fix GICv2 multi-source SGI injection
- Fix MMIO synchronization for GICv2 on v3 emulation
- Remove excess verbosity on the console
|
|
Swap the positions of blk_addr and blksz in the tracepoint print arguments
so that they match the print format.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: d2f82254e4e8 ("mmc: core: Add members to mmc_request and mmc_data for CQE's")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The vgic code is trying to be clever when injecting GICv2 SGIs,
and will happily populate LRs with the same interrupt number if
they come from multiple vcpus (after all, they are distinct
interrupt sources).
Unfortunately, this is against the letter of the architecture,
and the GICv2 architecture spec says "Each valid interrupt stored
in the List registers must have a unique VirtualID for that
virtual CPU interface.". GICv3 has similar (although slightly
ambiguous) restrictions.
This results in guests locking up when using GICv2-on-GICv3, for
example. The obvious fix is to stop trying so hard, and inject
a single vcpu per SGI per guest entry. After all, pending SGIs
with multiple source vcpus are pretty rare, and are mostly seen
in scenario where the physical CPUs are severely overcomitted.
But as we now only inject a single instance of a multi-source SGI per
vcpu entry, we may delay those interrupts for longer than strictly
necessary, and run the risk of injecting lower priority interrupts
in the meantime.
In order to address this, we adopt a three stage strategy:
- If we encounter a multi-source SGI in the AP list while computing
its depth, we force the list to be sorted
- When populating the LRs, we prevent the injection of any interrupt
of lower priority than that of the first multi-source SGI we've
injected.
- Finally, the injection of a multi-source SGI triggers the request
of a maintenance interrupt when there will be no pending interrupt
in the LRs (HCR_NPIE).
At the point where the last pending interrupt in the LRs switches
from Pending to Active, the maintenance interrupt will be delivered,
allowing us to add the remaining SGIs using the same process.
Cc: stable@vger.kernel.org
Fixes: 0919e84c0fc1 ("KVM: arm/arm64: vgic-new: Add IRQ sync/flush framework")
Acked-by: Christoffer Dall <cdall@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
We currently don't allow resetting mapped IRQs from userspace, because
their state is controlled by the hardware. But we do need to reset the
state when the VM is reset, so we provide a function for the 'owner' of
the mapped interrupt to reset the interrupt state.
Currently only the timer uses mapped interrupts, so we call this
function from the timer reset logic.
Cc: stable@vger.kernel.org
Fixes: 4c60e360d6df ("KVM: arm/arm64: Provide a get_input_level for the arch timer")
Signed-off-by: Christoffer Dall <cdall@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Prior to the rework of PMTU information storage in commit
2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer."),
when a PMTU event advertising a PMTU smaller than
net.ipv4.route.min_pmtu was received, we would disable setting the DF
flag on packets by locking the MTU metric, and set the PMTU to
net.ipv4.route.min_pmtu.
Since then, we don't disable DF, and set PMTU to
net.ipv4.route.min_pmtu, so the intermediate router that has this link
with a small MTU will have to drop the packets.
This patch reestablishes pre-2.6.39 behavior by splitting
rtable->rt_pmtu into a bitfield with rt_mtu_locked and rt_pmtu.
rt_mtu_locked indicates that we shouldn't set the DF bit on that path,
and is checked in ip_dont_fragment().
One possible workaround is to set net.ipv4.route.min_pmtu to a value low
enough to accommodate the lowest MTU encountered.
Fixes: 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a small clump of USB fixes for 4.16-rc6.
Nothing major, just a number of fixes in lots of different drivers, as
well as a PHY driver fix that snuck into this tree. Full details are
in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
usb: musb: Fix external abort in musb_remove on omap2430
phy: qcom-ufs: add MODULE_LICENSE tag
usb: typec: tcpm: fusb302: Do not log an error on -EPROBE_DEFER
USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM
usbip: vudc: fix null pointer dereference on udc->lock
xhci: Fix front USB ports on ASUS PRIME B350M-A
usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"
usb: usbmon: Read text within supplied buffer size
usb: host: xhci-rcar: add support for r8a77965
USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h
usb: xhci: dbc: Fix lockdep warning
xhci: fix endpoint context tracer output
Revert "typec: tcpm: Only request matching pdos"
usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
usb: quirks: add control message delay for 1b1c:1b20
uas: fix comparison for error code
usb: gadget: udc: renesas_usb3: add binging for r8a77965
usb: renesas_usbhs: add binding for r8a77965
usb: dwc2: fix STM32F7 USB OTG HS compatible
dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core binding
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty core and serial driver fixes for 4.16-rc6.
They resolve some newly reported bugs, as well as some very old ones,
which is always nice to see. There is also a new device id added in
here for good measure.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: imx: fix bogus dev_err
serial: sh-sci: prevent lockup on full TTY buffers
serial: 8250_pci: Add Brainboxes UC-260 4 port serial device
earlycon: add reg-offset to physical address before mapping
serial: core: mark port as initialized in autoconfig
serial: 8250_pci: Don't fail on multiport card class
tty/serial: atmel: add new version check for usart
tty: make n_tty_read() always abort if hangup is in progress
|
|
Andrei Vagin reported a KASAN: slab-out-of-bounds error in
skb_update_prio()
Since SYNACK might be attached to a request socket, we need to
get back to the listener socket.
Since this listener is manipulated without locks, add const
qualifiers to sock_cgroup_prioidx() so that the const can also
be used in skb_update_prio()
Also add the const qualifier to sock_cgroup_classid() for consistency.
Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Found this by accident.
There are no usages of bare cancel_work() in current kernel source.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This patch validates user provided input to prevent integer overflow due
to integer manipulation in the mlx5_ib_create_srq function.
Cc: syzkaller <syzkaller@googlegroups.com>
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2018-03-13
1) Refuse to insert 32 bit userspace socket policies on 64
bit systems like we do it for standard policies. We don't
have a compat layer, so inserting socket policies from
32 bit userspace will lead to a broken configuration.
2) Make the policy hold queue work without the flowcache.
Dummy bundles are not chached anymore, so we need to
generate a new one on each lookup as long as the SAs
are not yet in place.
3) Fix the validation of the esn replay attribute. The
The sanity check in verify_replay() is bypassed if
the XFRM_STATE_ESN flag is not set. Fix this by doing
the sanity check uncoditionally.
From Florian Westphal.
4) After most of the dst_entry garbage collection code
is removed, we may leak xfrm_dst entries as they are
neither cached nor tracked somewhere. Fix this by
reusing the 'uncached_list' to track xfrm_dst entries
too. From Xin Long.
5) Fix a rcu_read_lock/rcu_read_unlock imbalance in
xfrm_get_tos() From Xin Long.
6) Fix an infinite loop in xfrm_get_dst_nexthop. On
transport mode we fetch the child dst_entry after
we continue, so this pointer is never updated.
Fix this by fetching it before we continue.
7) Fix ESN sequence number gap after IPsec GSO packets.
We accidentally increment the sequence number counter
on the xfrm_state by one packet too much in the ESN
case. Fix this by setting the sequence number to the
correct value.
8) Reset the ethernet protocol after decapsulation only if a
mac header was set. Otherwise it breaks configurations
with TUN devices. From Yossi Kuperman.
9) Fix __this_cpu_read() usage in preemptible code. Use
this_cpu_read() instead in ipcomp_alloc_tfms().
From Greg Hackmann.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree, they are:
1) Fixed hashtable representation doesn't support timeout flag, skip it
otherwise rules to add elements from the packet fail bogusly fail with
EOPNOTSUPP.
2) Fix bogus error with 32-bits ebtables userspace and 64-bits kernel,
patch from Florian Westphal.
3) Sanitize proc names in several x_tables extensions, also from Florian.
4) Add sanitization to ebt_among wormhash logic, from Florian.
5) Missing release of hook array in flowtable.
====================
|
|
registered
Now when using 'ss' in iproute, kernel would try to load all _diag
modules, which also causes corresponding family and proto modules
to be loaded as well due to module dependencies.
Like after running 'ss', sctp, dccp, af_packet (if it works as a module)
would be loaded.
For example:
$ lsmod|grep sctp
$ ss
$ lsmod|grep sctp
sctp_diag 16384 0
sctp 323584 5 sctp_diag
inet_diag 24576 4 raw_diag,tcp_diag,sctp_diag,udp_diag
libcrc32c 16384 3 nf_conntrack,nf_nat,sctp
As these family and proto modules are loaded unintentionally, it
could cause some problems, like:
- Some debug tools use 'ss' to collect the socket info, which loads all
those diag and family and protocol modules. It's noisy for identifying
issues.
- Users usually expect to drop sctp init packet silently when they
have no sense of sctp protocol instead of sending abort back.
- It wastes resources (especially with multiple netns), and SCTP module
can't be unloaded once it's loaded.
...
In short, it's really inappropriate to have these family and proto
modules loaded unexpectedly when just doing debugging with inet_diag.
This patch is to introduce sock_load_diag_module() where it loads
the _diag module only when it's corresponding family or proto has
been already registered.
Note that we can't just load _diag module without the family or
proto loaded, as some symbols used in _diag module are from the
family or proto module.
v1->v2:
- move inet proto check to inet_diag to avoid a compiling err.
v2->v3:
- define sock_load_diag_module in sock.c and export one symbol
only.
- improve the changelog.
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In 664fcf123a30e (net: phy: Threaded interrupts allow some simplification)
the phy_interrupt system was changed to use a traditional threaded
interrupt scheme instead of a workqueue approach.
With this change, the phy status check moved into phy_change, which
did not report back to the caller whether or not the interrupt was
handled. This means that, in the case of a shared phy interrupt,
only the first phydev's interrupt registers are checked (since
phy_interrupt() would always return IRQ_HANDLED). This leads to
interrupt storms when it is a secondary device that's actually the
interrupt source.
Signed-off-by: Brad Mouring <brad.mouring@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
recent and hashlimit both create /proc files, but only check that
name is 0 terminated.
This can trigger WARN() from procfs when name is "" or "/".
Add helper for this and then use it for both.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: <syzbot+0502b00edac2a0680b61@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- fix sparc build issue when OF_IRQ not enabled (Guenter Roeck)
- fix enumeration of devices below switches on DesignWare-based
controllers (Koen Vandeputte)
* tag 'pci-v4.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: dwc: Fix enumeration end when reaching root subordinate
PCI: Move of_irq_parse_and_map_pci() declaration under OF_IRQ
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One notable fix to properly advertise our support for a new firmware
feature, caused by two series conflicting semantically but not
textually.
There's a new ioctl for the new ocxl driver, which is not a fix, but
needed to complete the userspace API and good to have before the
driver is in a released kernel.
Finally three minor selftest fixes, and a fix for intermittent build
failures for some obscure platforms, caused by a missing make
dependency.
Thanks to: Alastair D'Silva, Bharata B Rao, Guenter Roeck"
* tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Fix vector5 in ibm architecture vector table
ocxl: Document the OCXL_IOCTL_GET_METADATA IOCTL
ocxl: Add get_metadata IOCTL to share OCXL information to userspace
selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable
selftests/powerpc: Fix missing clean of pmu/lib.o
powerpc/boot: Fix random libfdt related build errors
selftests/powerpc: Skip tm-trap if transactional memory is not enabled
|
|
After commit fc72d1d54dd9 ("tuntap: XDP transmission"), we can
actually queueing XDP pointers in the pointer ring, so we should
examine the pointer type before freeing the pointer.
Fixes: fc72d1d54dd9 ("tuntap: XDP transmission")
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
"A miscellaneous pile of MIPS fixes for 4.16:
- move put_compat_sigset() to evade hardened usercopy warnings (4.16)
- select ARCH_HAVE_PC_{SERIO,PARPORT} for Loongson64 platforms (4.16)
- fix kzalloc() failure handling in ath25 (3.19) and Octeon (4.0)
- fix disabling of IPIs during BMIPS suspend (3.19)"
* tag 'mips_fixes_4.16_4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: BMIPS: Do not mask IPIs during suspend
MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_SERIO
MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_PARPORT
signals: Move put_compat_sigset to compat.h to silence hardened usercopy
MIPS: OCTEON: irq: Check for null return on kzalloc allocation
MIPS: ath25: Check for kzalloc allocation failure
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-03-08
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix various BPF helpers which adjust the skb and its GSO information
with regards to SCTP GSO. The latter is a special case where gso_size
is of value GSO_BY_FRAGS, so mangling that will end up corrupting
the skb, thus bail out when seeing SCTP GSO packets, from Daniel(s).
2) Fix a compilation error in bpftool where BPF_FS_MAGIC is not defined
due to too old kernel headers in the system, from Jiri.
3) Increase the number of x64 JIT passes in order to allow larger images
to converge instead of punting them to interpreter or having them
rejected when the interpreter is not built into the kernel, from Daniel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is mostly fixes for driver specific issues (nine of them) and the
storvsc performance improvement with interrupt handling which was
dropped from the previous fixes pull request.
We also have two regressions: one is a double call_rcu() in ATA error
handling and the other is a missed conversion to BLK_STS_OK in
__scsi_error_from_host_byte()"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedi: Fix kernel crash during port toggle
scsi: qla2xxx: Fix FC-NVMe LUN discovery
scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()
scsi: core: Avoid that ATA error handling can trigger a kernel hang or oops
scsi: qla2xxx: ensure async flags are reset correctly
scsi: qla2xxx: do not check login_state if no loop id is assigned
scsi: qla2xxx: Fixup locking for session deletion
scsi: qla2xxx: Fix NULL pointer crash due to active timer for ABTS
scsi: mpt3sas: wait for and flush running commands on shutdown/unload
scsi: mpt3sas: fix oops in error handlers after shutdown/unload
scsi: storvsc: Spread interrupts when picking a channel for I/O requests
scsi: megaraid_sas: Do not use 32-bit atomic request descriptor for Ventura controllers
|
|
Marek reported a LOCKDEP issue occurring on 32bit host,
that we tracked down to the fact that usbnet could either
run from soft or hard irqs.
This patch adds u64_stats_update_begin_irqsave() and
u64_stats_update_end_irqrestore() helpers to solve this case.
[ 17.768040] ================================
[ 17.772239] WARNING: inconsistent lock state
[ 17.776511] 4.16.0-rc3-next-20180227-00007-g876c53a7493c #453 Not tainted
[ 17.783329] --------------------------------
[ 17.787580] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[ 17.793607] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[ 17.798751] (&syncp->seq#5){?.-.}, at: [<9b22e5f0>]
asix_rx_fixup_internal+0x188/0x288
[ 17.806790] {IN-HARDIRQ-W} state was registered at:
[ 17.811677] tx_complete+0x100/0x208
[ 17.815319] __usb_hcd_giveback_urb+0x60/0xf0
[ 17.819770] xhci_giveback_urb_in_irq+0xa8/0x240
[ 17.824469] xhci_td_cleanup+0xf4/0x16c
[ 17.828367] xhci_irq+0xe74/0x2240
[ 17.831827] usb_hcd_irq+0x24/0x38
[ 17.835343] __handle_irq_event_percpu+0x98/0x510
[ 17.840111] handle_irq_event_percpu+0x1c/0x58
[ 17.844623] handle_irq_event+0x38/0x5c
[ 17.848519] handle_fasteoi_irq+0xa4/0x138
[ 17.852681] generic_handle_irq+0x18/0x28
[ 17.856760] __handle_domain_irq+0x6c/0xe4
[ 17.860941] gic_handle_irq+0x54/0xa0
[ 17.864666] __irq_svc+0x70/0xb0
[ 17.867964] arch_cpu_idle+0x20/0x3c
[ 17.871578] arch_cpu_idle+0x20/0x3c
[ 17.875190] do_idle+0x144/0x218
[ 17.878468] cpu_startup_entry+0x18/0x1c
[ 17.882454] start_kernel+0x394/0x400
[ 17.886177] irq event stamp: 161912
[ 17.889616] hardirqs last enabled at (161912): [<7bedfacf>]
__netdev_alloc_skb+0xcc/0x140
[ 17.897893] hardirqs last disabled at (161911): [<d58261d0>]
__netdev_alloc_skb+0x94/0x140
[ 17.904903] exynos5-hsi2c 12ca0000.i2c: tx timeout
[ 17.906116] softirqs last enabled at (161904): [<387102ff>]
irq_enter+0x78/0x80
[ 17.906123] softirqs last disabled at (161905): [<cf4c628e>]
irq_exit+0x134/0x158
[ 17.925722].
[ 17.925722] other info that might help us debug this:
[ 17.933435] Possible unsafe locking scenario:
[ 17.933435].
[ 17.940331] CPU0
[ 17.942488] ----
[ 17.944894] lock(&syncp->seq#5);
[ 17.948274] <Interrupt>
[ 17.950847] lock(&syncp->seq#5);
[ 17.954386].
[ 17.954386] *** DEADLOCK ***
[ 17.954386].
[ 17.962422] no locks held by swapper/0/0.
Fixes: c8b5d129ee29 ("net: usbnet: support 64bit stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we exceed current packets limit and we have more than one
segment in the list returned by skb_gso_segment(), netem drops
only the first one, skipping the rest, hence kmemleak reports:
unreferenced object 0xffff880b5d23b600 (size 1024):
comm "softirq", pid 0, jiffies 4384527763 (age 2770.629s)
hex dump (first 32 bytes):
00 80 23 5d 0b 88 ff ff 00 00 00 00 00 00 00 00 ..#]............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d8a19b9d>] __alloc_skb+0xc9/0x520
[<000000001709b32f>] skb_segment+0x8c8/0x3710
[<00000000c7b9bb88>] tcp_gso_segment+0x331/0x1830
[<00000000c921cba1>] inet_gso_segment+0x476/0x1370
[<000000008b762dd4>] skb_mac_gso_segment+0x1f9/0x510
[<000000002182660a>] __skb_gso_segment+0x1dd/0x620
[<00000000412651b9>] netem_enqueue+0x1536/0x2590 [sch_netem]
[<0000000005d3b2a9>] __dev_queue_xmit+0x1167/0x2120
[<00000000fc5f7327>] ip_finish_output2+0x998/0xf00
[<00000000d309e9d3>] ip_output+0x1aa/0x2c0
[<000000007ecbd3a4>] tcp_transmit_skb+0x18db/0x3670
[<0000000042d2a45f>] tcp_write_xmit+0x4d4/0x58c0
[<0000000056a44199>] tcp_tasklet_func+0x3d9/0x540
[<0000000013d06d02>] tasklet_action+0x1ca/0x250
[<00000000fcde0b8b>] __do_softirq+0x1b4/0x5a3
[<00000000e7ed027c>] irq_exit+0x1e2/0x210
Fix it by adding the rest of the segments, if any, to skb 'to_free'
list. Add new __qdisc_drop_all() and qdisc_drop_all() functions
because they can be useful in the future if we need to drop segmented
GSO packets in other places.
Fixes: 6071bd1aa13e ("netem: Segment GSO packets on enqueue")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When inserting duplicate objects (those with the same key),
current rhlist implementation messes up the chain pointers by
updating the bucket pointer instead of prev next pointer to the
newly inserted node. This causes missing elements on removal and
travesal.
Fix that by properly updating pprev pointer to point to
the correct rhash_head next pointer.
Issue: 1241076
Change-Id: I86b2c140bcb4aeb10b70a72a267ff590bb2b17e7
Fixes: ca26893f05e8 ('rhashtable: Add rhlist interface')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull sigingo fix from Eric Biederman:
"The kbuild test robot found that I accidentally moved si_pkey when I
was cleaning up siginfo_t. A short followed by an int with the int
having 8 byte alignment. Sheesh siginfo_t is a weird structure.
I have now corrected it and added build time checks that with a little
luck will catch any similar future mistakes. The build time checks
were sufficient for me to verify the bug and to verify my fix. So they
are at least useful this once."
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal/x86: Include the field offsets in the build time checks
signal: Correct the offset of si_pkey in struct siginfo
|
|
Corsair Strafe RGB keyboard does not respond to usb control messages
sometimes and hence generates timeouts.
Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair
Strafe RGB keyboard") tried to fix those timeouts by adding
USB_QUIRK_DELAY_INIT.
Unfortunately, even with this quirk timeouts of usb_control_msg()
can still be seen, but with a lower frequency (approx. 1 out of 15):
[ 29.103520] usb 1-8: string descriptor 0 read error: -110
[ 34.363097] usb 1-8: can't set config #1, error -110
Adding further delays to different locations where usb control
messages are issued just moves the timeouts to other locations,
e.g.:
[ 35.400533] usbhid 1-8:1.0: can't add hid device: -110
[ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110
The only way to reliably avoid those issues is having a pause after
each usb control message. In approx. 200 boot cycles no more timeouts
were seen.
Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary
to have the delay in hub_port_connect() after hub_port_init().
The overall boot time seems not to be influenced by these additional
delays, even on fast machines and lightweight distributions.
Fixes: de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard")
Cc: stable@vger.kernel.org
Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The change moving addr_lsb into the _sigfault union failed to take
into account that _sigfault._addr_bnd._lower being a pointer forced
the entire union to have pointer alignment. In practice this only
mattered for the offset of si_pkey which is why this has taken so long
to discover.
To correct this change _dummy_pkey and _dummy_bnd to have pointer type.
Reported-by: kernel test robot <shun.hao@intel.com>
Fixes: b68a68d3dcc1 ("signal: Move addr_lsb into the _sigfault union for clarity")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Since commit 4670d610d592 ("PCI: Move OF-related PCI functions into
PCI core"), sparc:allmodconfig fails to build with the following error.
pcie-cadence-host.c:(.text+0x4c4): undefined reference to `of_irq_parse_and_map_pci'
pcie-cadence-host.c:(.text+0x4c8): undefined reference to `of_irq_parse_and_map_pci'
of_irq_parse_and_map_pci() is now only available if OF_IRQ is enabled.
Make its declaration and its dummy function dependent on OF_IRQ to solve
the problem.
Fixes: 4670d610d592 ("PCI: Move OF-related PCI functions into PCI core")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
Pull networking fixes from David Miller:
1) Use an appropriate TSQ pacing shift in mac80211, from Toke
Høiland-Jørgensen.
2) Just like ipv4's ip_route_me_harder(), we have to use skb_to_full_sk
in ip6_route_me_harder, from Eric Dumazet.
3) Fix several shutdown races and similar other problems in l2tp, from
James Chapman.
4) Handle missing XDP flush properly in tuntap, for real this time.
From Jason Wang.
5) Out-of-bounds access in powerpc ebpf tailcalls, from Daniel
Borkmann.
6) Fix phy_resume() locking, from Andrew Lunn.
7) IFLA_MTU values are ignored on newlink for some tunnel types, fix
from Xin Long.
8) Revert F-RTO middle box workarounds, they only handle one dimension
of the problem. From Yuchung Cheng.
9) Fix socket refcounting in RDS, from Ka-Cheong Poon.
10) Don't allow ppp unit registration to an unregistered channel, from
Guillaume Nault.
11) Various hv_netvsc fixes from Stephen Hemminger.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (98 commits)
hv_netvsc: propagate rx filters to VF
hv_netvsc: filter multicast/broadcast
hv_netvsc: defer queue selection to VF
hv_netvsc: use napi_schedule_irqoff
hv_netvsc: fix race in napi poll when rescheduling
hv_netvsc: cancel subchannel setup before halting device
hv_netvsc: fix error unwind handling if vmbus_open fails
hv_netvsc: only wake transmit queue if link is up
hv_netvsc: avoid retry on send during shutdown
virtio-net: re enable XDP_REDIRECT for mergeable buffer
ppp: prevent unregistered channels from connecting to PPP units
tc-testing: skbmod: fix match value of ethertype
mlxsw: spectrum_switchdev: Check success of FDB add operation
net: make skb_gso_*_seglen functions private
net: xfrm: use skb_gso_validate_network_len() to check gso sizes
net: sched: tbf: handle GSO_BY_FRAGS case in enqueue
net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len
rds: Incorrect reference counting in TCP socket creation
net: ethtool: don't ignore return from driver get_fecparam method
vrf: check forwarding on the original netdevice when generating ICMP dest unreachable
...
|
|
They're very hard to use properly as they do not consider the
GSO_BY_FRAGS case. Code should use skb_gso_validate_network_len
and skb_gso_validate_mac_len as they do consider this case.
Make the seglen functions static, which stops people using them
outside of skbuff.c
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If you take a GSO skb, and split it into packets, will the network
length (L3 headers + L4 headers + payload) of those packets be small
enough to fit within a given MTU?
skb_gso_validate_mtu gives you the answer to that question. However,
we recently added to add a way to validate the MAC length of a split GSO
skb (L2+L3+L4+payload), and the names get confusing, so rename
skb_gso_validate_mtu to skb_gso_validate_network_len
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A 4.16 regression fix, three fixes for -stable, and a cleanup fix:
- During the merge window support for the new ACPI NVDIMM Platform
Capabilities structure disabled support for "deep flush", a
force-unit- access like mechanism for persistent memory. Restore
that mechanism.
- VFIO like RDMA is yet one more memory registration / pinning
interface that is incompatible with Filesystem-DAX. Disable long
term pins of Filesystem-DAX mappings via VFIO.
- The Filesystem-DAX detection to prevent long terms pins mistakenly
also disabled Device-DAX pins which are not subject to the same
block- map collision concerns.
- Similar to the setup path, softlockup warnings can trigger in the
shutdown path for large persistent memory namespaces. Teach
for_each_device_pfn() to perform cond_resched() in all cases.
- Boaz noticed that the might_sleep() in dax_direct_access() is stale
as of the v4.15 kernel.
These have received a build success notification from the 0day robot,
and the longterm pin fixes have appeared in -next. However, I recently
rebased the tree to remove some other fixes that need to be reworked
after review feedback.
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
memremap: fix softlockup reports at teardown
libnvdimm: re-enable deep flush for pmem devices via fsync()
vfio: disable filesystem-dax page pinning
dax: fix vma_is_fsdax() helper
dax: ->direct_access does not sleep anymore
|
