summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-04-25crypto: shash - remove shash_desc::flagsEric Biggers
The flags field in 'struct shash_desc' never actually does anything. The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP. However, no shash algorithm ever sleeps, making this flag a no-op. With this being the case, inevitably some users who can't sleep wrongly pass MAY_SLEEP. These would all need to be fixed if any shash algorithm actually started sleeping. For example, the shash_ahash_*() functions, which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP from the ahash API to the shash API. However, the shash functions are called under kmap_atomic(), so actually they're assumed to never sleep. Even if it turns out that some users do need preemption points while hashing large buffers, we could easily provide a helper function crypto_shash_update_large() which divides the data into smaller chunks and calls crypto_shash_update() and cond_resched() for each chunk. It's not necessary to have a flag in 'struct shash_desc', nor is it necessary to make individual shash algorithms aware of this at all. Therefore, remove shash_desc::flags, and document that the crypto_shash_*() functions can be called from any context. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-18crypto: cryptd - remove ability to instantiate ablkciphersEric Biggers
Remove cryptd_alloc_ablkcipher() and the ability of cryptd to create algorithms with the deprecated "ablkcipher" type. This has been unused since commit 0e145b477dea ("crypto: ablk_helper - remove ablk_helper"). Instead, cryptd_alloc_skcipher() is used. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-18crypto: ecrdsa - add EC-RDSA (GOST 34.10) algorithmVitaly Chikunov
Add Elliptic Curve Russian Digital Signature Algorithm (GOST R 34.10-2012, RFC 7091, ISO/IEC 14888-3) is one of the Russian (and since 2018 the CIS countries) cryptographic standard algorithms (called GOST algorithms). Only signature verification is supported, with intent to be used in the IMA. Summary of the changes: * crypto/Kconfig: - EC-RDSA is added into Public-key cryptography section. * crypto/Makefile: - ecrdsa objects are added. * crypto/asymmetric_keys/x509_cert_parser.c: - Recognize EC-RDSA and Streebog OIDs. * include/linux/oid_registry.h: - EC-RDSA OIDs are added to the enum. Also, a two currently not implemented curve OIDs are added for possible extension later (to not change numbering and grouping). * crypto/ecc.c: - Kenneth MacKay copyright date is updated to 2014, because vli_mmod_slow, ecc_point_add, ecc_point_mult_shamir are based on his code from micro-ecc. - Functions needed for ecrdsa are EXPORT_SYMBOL'ed. - New functions: vli_is_negative - helper to determine sign of vli; vli_from_be64 - unpack big-endian array into vli (used for a signature); vli_from_le64 - unpack little-endian array into vli (used for a public key); vli_uadd, vli_usub - add/sub u64 value to/from vli (used for increment/decrement); mul_64_64 - optimized to use __int128 where appropriate, this speeds up point multiplication (and as a consequence signature verification) by the factor of 1.5-2; vli_umult - multiply vli by a small value (speeds up point multiplication by another factor of 1.5-2, depending on vli sizes); vli_mmod_special - module reduction for some form of Pseudo-Mersenne primes (used for the curves A); vli_mmod_special2 - module reduction for another form of Pseudo-Mersenne primes (used for the curves B); vli_mmod_barrett - module reduction using pre-computed value (used for the curve C); vli_mmod_slow - more general module reduction which is much slower (used when the modulus is subgroup order); vli_mod_mult_slow - modular multiplication; ecc_point_add - add two points; ecc_point_mult_shamir - add two points multiplied by scalars in one combined multiplication (this gives speed up by another factor 2 in compare to two separate multiplications). ecc_is_pubkey_valid_partial - additional samity check is added. - Updated vli_mmod_fast with non-strict heuristic to call optimal module reduction function depending on the prime value; - All computations for the previously defined (two NIST) curves should not unaffected. * crypto/ecc.h: - Newly exported functions are documented. * crypto/ecrdsa_defs.h - Five curves are defined. * crypto/ecrdsa.c: - Signature verification is implemented. * crypto/ecrdsa_params.asn1, crypto/ecrdsa_pub_key.asn1: - Templates for BER decoder for EC-RDSA parameters and public key. Cc: linux-integrity@vger.kernel.org Signed-off-by: Vitaly Chikunov <vt@altlinux.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-18X.509: parse public key parameters from x509 for akcipherVitaly Chikunov
Some public key algorithms (like EC-DSA) keep in parameters field important data such as digest and curve OIDs (possibly more for different EC-DSA variants). Thus, just setting a public key (as for RSA) is not enough. Append parameters into the key stream for akcipher_set_{pub,priv}_key. Appended data is: (u32) algo OID, (u32) parameters length, parameters data. This does not affect current akcipher API nor RSA ciphers (they could ignore it). Idea of appending parameters to the key stream is by Herbert Xu. Cc: David Howells <dhowells@redhat.com> Cc: Denis Kenzior <denkenz@gmail.com> Cc: keyrings@vger.kernel.org Signed-off-by: Vitaly Chikunov <vt@altlinux.org> Reviewed-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-18crypto: akcipher - new verify API for public key algorithmsVitaly Chikunov
Previous akcipher .verify() just `decrypts' (using RSA encrypt which is using public key) signature to uncover message hash, which was then compared in upper level public_key_verify_signature() with the expected hash value, which itself was never passed into verify(). This approach was incompatible with EC-DSA family of algorithms, because, to verify a signature EC-DSA algorithm also needs a hash value as input; then it's used (together with a signature divided into halves `r||s') to produce a witness value, which is then compared with `r' to determine if the signature is correct. Thus, for EC-DSA, nor requirements of .verify() itself, nor its output expectations in public_key_verify_signature() wasn't sufficient. Make improved .verify() call which gets hash value as input and produce complete signature check without any output besides status. Now for the top level verification only crypto_akcipher_verify() needs to be called and its return value inspected. Make sure that `digest' is in kmalloc'd memory (in place of `output`) in {public,tpm}_key_verify_signature() as insisted by Herbert Xu, and will be changed in the following commit. Cc: David Howells <dhowells@redhat.com> Cc: keyrings@vger.kernel.org Signed-off-by: Vitaly Chikunov <vt@altlinux.org> Reviewed-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-18crypto: des_generic - Forbid 2-key in 3DES and add helpersHerbert Xu
This patch adds a requirement to the generic 3DES implementation such that 2-key 3DES (K1 == K3) is no longer allowed in FIPS mode. We will also provide helpers that may be used by drivers that implement 3DES to make the same check. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-08crypto: streebog - fix unaligned memory accessesEric Biggers
Don't cast the data buffer directly to streebog_uint512, as this violates alignment rules. Fixes: fe18957e8e87 ("crypto: streebog - add Streebog hash function") Cc: Vitaly Chikunov <vt@altlinux.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Vitaly Chikunov <vt@altlinux.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-08crypto: aes - Use ___cacheline_aligned for aes dataAndi Kleen
cacheline_aligned is a special section. It cannot be const at the same time because it's not read-only. It doesn't give any MMU protection. Mark it ____cacheline_aligned to not place it in a special section, but just align it in .rodata Cc: herbert@gondor.apana.org.au Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-08crypto: ccp - introduce SEV_GET_ID2 commandSingh, Brijesh
The current definition and implementation of the SEV_GET_ID command does not provide the length of the unique ID returned by the firmware. As per the firmware specification, the firmware may return an ID length that is not restricted to 64 bytes as assumed by the SEV_GET_ID command. Introduce the SEV_GET_ID2 command to overcome with the SEV_GET_ID limitations. Deprecate the SEV_GET_ID in the favor of SEV_GET_ID2. At the same time update SEV API web link. Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Gary Hook <gary.hook@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Nathaniel McCallum <npmccallum@redhat.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-03-22crypto: simd,testmgr - introduce crypto_simd_usable()Eric Biggers
So that the no-SIMD fallback code can be tested by the crypto self-tests, add a macro crypto_simd_usable() which wraps may_use_simd(), but also returns false if the crypto self-tests have set a per-CPU bool to disable SIMD in crypto code on the current CPU. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-03-22crypto: x86/morus1280 - convert to use AEAD SIMD helpersEric Biggers
Convert the x86 implementations of MORUS-1280 to use the AEAD SIMD helpers, rather than hand-rolling the same functionality. This simplifies the code and also fixes the bug where the user-provided aead_request is modified. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-03-22crypto: x86/morus640 - convert to use AEAD SIMD helpersEric Biggers
Convert the x86 implementation of MORUS-640 to use the AEAD SIMD helpers, rather than hand-rolling the same functionality. This simplifies the code and also fixes the bug where the user-provided aead_request is modified. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-03-22crypto: simd - support wrapping AEAD algorithmsEric Biggers
Update the crypto_simd module to support wrapping AEAD algorithms. Previously it only supported skciphers. The code for each is similar. I'll be converting the x86 implementations of AES-GCM, AEGIS, and MORUS to use this. Currently they each independently implement the same functionality. This will not only simplify the code, but it will also fix the bug detected by the improved self-tests: the user-provided aead_request is modified. This is because these algorithms currently reuse the original request, whereas the crypto_simd helpers build a new request in the original request's context. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-03-17Merge tag 'kbuild-v5.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - add more Build-Depends to Debian source package - prefix header search paths with $(srctree)/ - make modpost show verbose section mismatch warnings - avoid hard-coded CROSS_COMPILE for h8300 - fix regression for Debian make-kpkg command - add semantic patch to detect missing put_device() - fix some warnings of 'make deb-pkg' - optimize NOSTDINC_FLAGS evaluation - add warnings about redundant generic-y - clean up Makefiles and scripts * tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove stale lxdialog/.gitignore kbuild: force all architectures except um to include mandatory-y kbuild: warn redundant generic-y Revert "modsign: Abort modules_install when signing fails" kbuild: Make NOSTDINC_FLAGS a simply expanded variable kbuild: deb-pkg: avoid implicit effects coccinelle: semantic code search for missing put_device() kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb kbuild: deb-pkg: add CONFIG_ prefix to kernel config options kbuild: add workaround for Debian make-kpkg kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG} unicore32: simplify linker script generation for decompressor h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- kbuild: move archive command to scripts/Makefile.lib modpost: always show verbose warning for section mismatch ia64: prefix header search path with $(srctree)/ libfdt: prefix header search paths with $(srctree)/ deb-pkg: generate correct build dependencies
2019-03-17kbuild: force all architectures except um to include mandatory-yMasahiro Yamada
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes the common Kbuild.asm file. Factor out the duplicated include directives to scripts/Makefile.asm-generic so that no architecture would opt out of the mandatory-y mechanism. um is not forced to include mandatory-y since it is a very exceptional case which does not support UAPI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-16Merge tag 'pidfd-v5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd system call from Christian Brauner: "This introduces the ability to use file descriptors from /proc/<pid>/ as stable handles on struct pid. Even if a pid is recycled the handle will not change. For a start these fds can be used to send signals to the processes they refer to. With the ability to use /proc/<pid> fds as stable handles on struct pid we can fix a long-standing issue where after a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. With this patchset we enable a variety of use cases. One obvious example is that we can now safely delegate an important part of process management - sending signals - to processes other than the parent of a given process by sending file descriptors around via scm rights and not fearing that the given process will have been recycled in the meantime. It also allows for easy testing whether a given process is still alive or not by sending signal 0 to a pidfd which is quite handy. There has been some interest in this feature e.g. from systems management (systemd, glibc) and container managers. I have requested and gotten comments from glibc to make sure that this syscall is suitable for their needs as well. In the future I expect it to take on most other pid-based signal syscalls. But such features are left for the future once they are needed. This has been sitting in linux-next for quite a while and has not caused any issues. It comes with selftests which verify basic functionality and also test that a recycled pid cannot be signaled via a pidfd. Jon has written about a prior version of this patchset. It should cover the basic functionality since not a lot has changed since then: https://lwn.net/Articles/773459/ The commit message for the syscall itself is extensively documenting the syscall, including it's functionality and extensibility" * tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: selftests: add tests for pidfd_send_signal() signal: add pidfd_send_signal() syscall
2019-03-16Merge tag 'devdax-for-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull device-dax updates from Dan Williams: "New device-dax infrastructure to allow persistent memory and other "reserved" / performance differentiated memories, to be assigned to the core-mm as "System RAM". Some users want to use persistent memory as additional volatile memory. They are willing to cope with potential performance differences, for example between DRAM and 3D Xpoint, and want to use typical Linux memory management apis rather than a userspace memory allocator layered over an mmap() of a dax file. The administration model is to decide how much Persistent Memory (pmem) to use as System RAM, create a device-dax-mode namespace of that size, and then assign it to the core-mm. The rationale for device-dax is that it is a generic memory-mapping driver that can be layered over any "special purpose" memory, not just pmem. On subsequent boots udev rules can be used to restore the memory assignment. One implication of using pmem as RAM is that mlock() no longer keeps data off persistent media. For this reason it is recommended to enable NVDIMM Security (previously merged for 5.0) to encrypt pmem contents at rest. We considered making this recommendation an actively enforced requirement, but in the end decided to leave it as a distribution / administrator policy to allow for emulation and test environments that lack security capable NVDIMMs. Summary: - Replace the /sys/class/dax device model with /sys/bus/dax, and include a compat driver so distributions can opt-in to the new ABI. - Allow for an alternative driver for the device-dax address-range - Introduce the 'kmem' driver to hotplug / assign a device-dax address-range to the core-mm. - Arrange for the device-dax target-node to be onlined so that the newly added memory range can be uniquely referenced by numa apis" NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because we currently have special - and very annoying rules in the kernel about accessing PMEM only with the "MC safe" accessors, because machine checks inside the regular repeat string copy functions can be fatal in some (not described) circumstances. And apparently the PMEM modules can cause that a lot more than regular RAM. The argument is that this happens because PMEM doesn't necessarily get scrubbed at boot like RAM does, but that is planned to be added for the user space tooling. Quoting Dan from another email: "The exposure can be reduced in the volatile-RAM case by scanning for and clearing errors before it is onlined as RAM. The userspace tooling for that can be in place before v5.1-final. There's also runtime notifications of errors via acpi_nfit_uc_error_notify() from background scrubbers on the DIMM devices. With that mechanism the kernel could proactively clear newly discovered poison in the volatile case, but that would be additional development more suitable for v5.2. I understand the concern, and the need to highlight this issue by tapping the brakes on feature development, but I don't see PMEM as RAM making the situation worse when the exposure is also there via DAX in the PMEM case. Volatile-RAM is arguably a safer use case since it's possible to repair pages where the persistent case needs active application coordination" * tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: "Hotplug" persistent memory for use like normal RAM mm/resource: Let walk_system_ram_range() search child resources mm/memory-hotplug: Allow memory resources to be children mm/resource: Move HMM pr_debug() deeper into resource code mm/resource: Return real error codes from walk failures device-dax: Add a 'modalias' attribute to DAX 'bus' devices device-dax: Add a 'target_node' attribute device-dax: Auto-bind device after successful new_id acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node device-dax: Add /sys/class/dax backwards compatibility device-dax: Add support for a dax override driver device-dax: Move resource pinning+mapping into the common driver device-dax: Introduce bus + driver model device-dax: Start defining a dax bus model device-dax: Remove multi-resource infrastructure device-dax: Kill dax_region base device-dax: Kill dax_region ida
2019-03-16Merge tag 'nfs-for-5.1-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Bugfixes: - Fix an Oops in SUNRPC back channel tracepoints - Fix a SUNRPC client regression when handling oversized replies - Fix the minimal size for SUNRPC reply buffer allocation - rpc_decode_header() must always return a non-zero value on error - Fix a typo in pnfs_update_layout() Cleanup: - Remove redundant check for the reply length in call_decode()" * tag 'nfs-for-5.1-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Remove redundant check for the reply length in call_decode() SUNRPC: Handle the SYSTEM_ERR rpc error SUNRPC: rpc_decode_header() must always return a non-zero value on error SUNRPC: Use the ENOTCONN error on socket disconnect SUNRPC: Fix the minimal size for reply buffer allocation SUNRPC: Fix a client regression when handling oversized replies pNFS: Fix a typo in pnfs_update_layout fix null pointer deref in tracepoints in back channel
2019-03-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "ARM: - some cleanups - direct physical timer assignment - cache sanitization for 32-bit guests s390: - interrupt cleanup - introduction of the Guest Information Block - preparation for processor subfunctions in cpu models PPC: - bug fixes and improvements, especially related to machine checks and protection keys x86: - many, many cleanups, including removing a bunch of MMU code for unnecessary optimizations - AVIC fixes Generic: - memcg accounting" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits) kvm: vmx: fix formatting of a comment KVM: doc: Document the life cycle of a VM and its resources MAINTAINERS: Add KVM selftests to existing KVM entry Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()" KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char() KVM: PPC: Fix compilation when KVM is not enabled KVM: Minor cleanups for kvm_main.c KVM: s390: add debug logging for cpu model subfunctions KVM: s390: implement subfunction processor calls arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2 KVM: arm/arm64: Remove unused timer variable KVM: PPC: Book3S: Improve KVM reference counting KVM: PPC: Book3S HV: Fix build failure without IOMMU support Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()" x86: kvmguest: use TSC clocksource if invariant TSC is exposed KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes() KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children ...
2019-03-15Merge tag 'trace-v5.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes and cleanups from Steven Rostedt: "This contains a series of last minute clean ups, small fixes and error checks" * tag 'trace-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/probe: Verify alloc_trace_*probe() result tracing/probe: Check event/group naming rule at parsing tracing/probe: Check the size of argument name and body tracing/probe: Check event name length correctly tracing/probe: Check maxactive error cases tracing: kdb: Fix ftdump to not sleep trace/probes: Remove kernel doc style from non kernel doc comment tracing/probes: Make reserved_field_names static
2019-03-15Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - An improvement from Ard Biesheuvel, who noted that the identity map setup was taking a long time due to flush_cache_louis(). - Update a comment about dma_ops from Wolfram Sang. - Remove use of "-p" with ld, where this flag has been a no-op since 2004. - Remove the printing of the virtual memory layout, which is no longer useful since we hide pointers. - Correct SCU help text. - Remove legacy TWD registration method. - Add pgprot_device() implementation for mapping PCI sysfs resource files. - Initialise PFN limits earlier for kmemleak. - Fix argument count to match macro definition (affects clang builds) - Use unified assembler language almost everywhere for clang, and other clang improvements (from Stefan Agner, Nathan Chancellor). - Support security extension for noMMU and other noMMU cleanups (from Vladimir Murzin). - Remove unnecessary SMP bringup code (which was incorrectly copy'n' pasted from the ARM platform implementations) and remove it from the arch code to discourge further copys of it appearing. - Add Cortex A9 erratum preventing kexec working on some SoCs. - AMBA bus identification updates from Mike Leach. - More use of raw spinlocks to avoid -RT kernel issues (from Yang Shi and Sebastian Andrzej Siewior). - MCPM hyp/svc mode mismatch fixes from Marek Szyprowski. * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits) ARM: 8849/1: NOMMU: Fix encodings for PMSAv8's PRBAR4/PRLAR4 ARM: 8848/1: virt: Align GIC version check with arm64 counterpart ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used ARM: 8845/1: use unified assembler in c files ARM: 8844/1: use unified assembler in assembly files ARM: 8843/1: use unified assembler in headers ARM: 8841/1: use unified assembler in macros ARM: 8840/1: use a raw_spinlock_t in unwind ARM: 8839/1: kprobe: make patch_lock a raw_spinlock_t ARM: 8837/1: coresight: etmv4: Update ID register table to add UCI support ARM: 8836/1: drivers: amba: Update component matching to use the CoreSight UCI values. ARM: 8838/1: drivers: amba: Updates to component identification for driver matching. ARM: 8833/1: Ensure that NEON code always compiles with Clang ARM: avoid Cortex-A9 livelock on tight dmb loops ARM: smp: remove arch-provided "pen_release" ARM: actions: remove boot_lock and pen_release ARM: oxnas: remove CPU hotplug implementation ARM: qcom: remove unnecessary boot_lock ARM: 8832/1: NOMMU: Limit visibility for CONFIG_FLASH_{MEM_BASE,SIZE} ARM: 8831/1: NOMMU: pmsa-v8: remove unneeded semicolon ...
2019-03-15Merge tag 'ntb-5.1' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB updates from Jon Mason: - fixes for switchtec debugability and mapping table entries - NTB transport improvements - a reworking of the peer_db_addr for better abstraction * tag 'ntb-5.1' of git://github.com/jonmason/ntb: NTB: add new parameter to peer_db_addr() db_bit and db_data NTB: ntb_transport: Ensure the destination buffer is mapped for TX DMA NTB: ntb_transport: Free MWs in ntb_transport_link_cleanup() ntb_hw_switchtec: Added support of >=4G memory windows ntb_hw_switchtec: NT req id mapping table register entry number should be 512 ntb_hw_switchtec: debug print 64bit aligned crosslink BAR Numbers
2019-03-15Merge tag 'sound-fix-5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Some cleaning after the first batch; mostly about HD-audio quirks but also some NULL dereference fixes in corner cases and a random build error fix, too" * tag 'sound-fix-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Add support headset mode for New DELL WYSE NB ALSA: hda/realtek - Add support headset mode for DELL WYSE AIO ALSA: hda/realtek: merge alc_fixup_headset_jack to alc295_fixup_chromebook ALSA: pcm: Fix function name in kernel-doc comment ALSA: hda: hdmi - add Icelake support ALSA: hda - add more quirks for HP Z2 G4 and HP Z240 ALSA: hda/realtek - Fixed Headset Mic JD not stable ALSA: hda/realtek: Enable headset MIC of Acer TravelMate X514-51T with ALC255 ALSA: hda/tegra: avoid build error without CONFIG_PM ALSA: usx2y: Fix potential NULL pointer dereference ALSA: hda: Avoid NULL pointer dereference at snd_hdac_stream_start()
2019-03-15Merge tag 'drm-next-2019-03-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes and updates from Dave Airlie: "A few various fixes pulls and one late etnaviv pull but it was nearly all fixes anyways. etnaviv: - late next pull - mmu mapping fix - build non-ARM arches - misc fixes i915: - HDCP state handling fix - shrinker interaction fix - atomic state leak fix qxl: - kick out framebuffers early fix amdgpu: - Powerplay fixes - DC fixes - BACO turned off for now on vega20 - Locking fix - KFD MQD fix - gfx9 golden register updates" * tag 'drm-next-2019-03-15' of git://anongit.freedesktop.org/drm/drm: (43 commits) drm/amdgpu: Update gc golden setting for vega family drm/amd/powerplay: correct power reading on fiji drm/amd/powerplay: set max fan target temperature as 105C drm/i915: Relax mmap VMA check drm/i915: Fix atomic state leak when resetting HDMI link drm/i915: Acquire breadcrumb ref before cancelling drm/i915/selftests: Always free spinner on __sseu_prepare error drm/i915: Reacquire priolist cache after dropping the engine lock drm/i915: Protect i915_active iterators from the shrinker drm/i915: HDCP state handling in ddi_update_pipe drm/qxl: remove conflicting framebuffers earlier drm/fb-helper: call vga_remove_vgacon automatically. drm: move i915_kick_out_vgacon to vgaarb drm/amd/display: don't call dm_pp_ function from an fpu block drm: add __user attribute to ptr_to_compat() drm/amdgpu: clear PDs/PTs only after initializing them drm/amd/display: Pass app_tf by value rather than by reference Revert "drm/amdgpu: use BACO reset on vega20 if platform support" drm/amd/powerplay: show the right override pcie parameters drm/amd/powerplay: honor the OD settings ...
2019-03-15Merge tag 'f2fs-for-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "We've continued mainly to fix bugs in this round, as f2fs has been shipped in more devices. Especially, we've focused on stabilizing checkpoint=disable feature, and provided some interfaces for QA. Enhancements: - expose FS_NOCOW_FL for pin_file - run discard jobs at unmount time with timeout - tune discarding thread to avoid idling which consumes power - some checking codes to address vulnerabilities - give random value to i_generation - shutdown with more flags for QA Bug fixes: - clean up stale objects when mount is failed along with checkpoint=disable - fix system being stuck due to wrong count by atomic writes - handle some corrupted disk cases - fix a deadlock in f2fs_read_inline_dir We've also added some minor build error fixes and clean-up patches" * tag 'f2fs-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (53 commits) f2fs: set pin_file under CAP_SYS_ADMIN f2fs: fix to avoid deadlock in f2fs_read_inline_dir() f2fs: fix to adapt small inline xattr space in __find_inline_xattr() f2fs: fix to do sanity check with inode.i_inline_xattr_size f2fs: give some messages for inline_xattr_size f2fs: don't trigger read IO for beyond EOF page f2fs: fix to add refcount once page is tagged PG_private f2fs: remove wrong comment in f2fs_invalidate_page() f2fs: fix to use kvfree instead of kzfree f2fs: print more parameters in trace_f2fs_map_blocks f2fs: trace f2fs_ioc_shutdown f2fs: fix to avoid deadlock of atomic file operations f2fs: fix to dirty inode for i_mode recovery f2fs: give random value to i_generation f2fs: no need to take page lock in readdir f2fs: fix to update iostat correctly in IPU path f2fs: fix encrypted page memory leak f2fs: make fault injection covering __submit_flush_wait() f2fs: fix to retry fill_super only if recovery failed f2fs: silence VM_WARN_ON_ONCE in mempool_alloc ...
2019-03-15Merge branch 'akpm' (rest of patches from Andrew)Linus Torvalds
Merge the left-over patches from Andrew Morton. This merges the remaining two patches from Andrew's pile of "little bit more MM". I mulled it over, and we emailed back and forth with Josef, and he pointed out where I was wrong. Rule #51 of kernel maintenance: when somebody makes it clear that they know the code better than you did, stop arguing and just apply the damn patch. Add a third patch by me to add a comment for the case that I had thought was buggy and Josef corrected me on. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: filemap: add a comment about FAULT_FLAG_RETRY_NOWAIT behavior filemap: drop the mmap_sem for all blocking operations filemap: kill page_cache_read usage in filemap_fault
2019-03-15filemap: kill page_cache_read usage in filemap_faultJosef Bacik
Patch series "drop the mmap_sem when doing IO in the fault path", v6. Now that we have proper isolation in place with cgroups2 we have started going through and fixing the various priority inversions. Most are all gone now, but this one is sort of weird since it's not necessarily a priority inversion that happens within the kernel, but rather because of something userspace does. We have giant applications that we want to protect, and parts of these giant applications do things like watch the system state to determine how healthy the box is for load balancing and such. This involves running 'ps' or other such utilities. These utilities will often walk /proc/<pid>/whatever, and these files can sometimes need to down_read(&task->mmap_sem). Not usually a big deal, but we noticed when we are stress testing that sometimes our protected application has latency spikes trying to get the mmap_sem for tasks that are in lower priority cgroups. This is because any down_write() on a semaphore essentially turns it into a mutex, so even if we currently have it held for reading, any new readers will not be allowed on to keep from starving the writer. This is fine, except a lower priority task could be stuck doing IO because it has been throttled to the point that its IO is taking much longer than normal. But because a higher priority group depends on this completing it is now stuck behind lower priority work. In order to avoid this particular priority inversion we want to use the existing retry mechanism to stop from holding the mmap_sem at all if we are going to do IO. This already exists in the read case sort of, but needed to be extended for more than just grabbing the page lock. With io.latency we throttle at submit_bio() time, so the readahead stuff can block and even page_cache_read can block, so all these paths need to have the mmap_sem dropped. The other big thing is ->page_mkwrite. btrfs is particularly shitty here because we have to reserve space for the dirty page, which can be a very expensive operation. We use the same retry method as the read path, and simply cache the page and verify the page is still setup properly the next pass through ->page_mkwrite(). I've tested these patches with xfstests and there are no regressions. This patch (of 3): If we do not have a page at filemap_fault time we'll do this weird forced page_cache_read thing to populate the page, and then drop it again and loop around and find it. This makes for 2 ways we can read a page in filemap_fault, and it's not really needed. Instead add a FGP_FOR_MMAP flag so that pagecache_get_page() will return a unlocked page that's in pagecache. Then use the normal page locking and readpage logic already in filemap_fault. This simplifies the no page in page cache case significantly. [akpm@linux-foundation.org: fix comment text] [josef@toxicpanda.com: don't unlock null page in FGP_FOR_MMAP case] Link: http://lkml.kernel.org/r/20190312201742.22935-1-josef@toxicpanda.com Link: http://lkml.kernel.org/r/20181211173801.29535-2-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Tejun Heo <tj@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc patches from Andrew Morton: - a little bit more MM - a few fixups [ The "little bit more MM" is actually just one of the three patches Andrew sent for mm/filemap.c, I'm still mulling over two more of them from Josef Bacik - Linus ] * emailed patches from Andrew Morton <akpm@linux-foundation.org>: include/linux/swap.h: use offsetof() instead of custom __swapoffset macro tools/testing/selftests/proc/proc-pid-vm.c: test with vsyscall in mind zram: default to lzo-rle instead of lzo filemap: pass vm_fault to the mmap ra helpers
2019-03-14include/linux/swap.h: use offsetof() instead of custom __swapoffset macroPi-Hsun Shih
Use offsetof() to calculate offset of a field to take advantage of compiler built-in version when possible, and avoid UBSAN warning when compiling with Clang: UBSAN: Undefined behaviour in mm/swapfile.c:3010:38 member access within null pointer of type 'union swap_header' CPU: 6 PID: 1833 Comm: swapon Tainted: G S 4.19.23 #43 Call trace: dump_backtrace+0x0/0x194 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0x70/0x94 ubsan_epilogue+0x14/0x44 ubsan_type_mismatch_common+0xf4/0xfc __ubsan_handle_type_mismatch_v1+0x34/0x54 __se_sys_swapon+0x654/0x1084 __arm64_sys_swapon+0x1c/0x24 el0_svc_common+0xa8/0x150 el0_svc_compat_handler+0x2c/0x38 el0_svc_compat+0x8/0x18 Link: http://lkml.kernel.org/r/20190312081902.223764-1-pihsun@chromium.org Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14Merge tag 'pm-5.1-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are mostly fixes and cleanups on top of the previously merged power management material for 5.1-rc1 with one cpupower utility update that wasn't pushed earlier due to unfortunate timing. Specifics: - Fix registration of new cpuidle governors partially broken during the 5.0 development cycle by mistake (Rafael Wysocki). - Avoid integer overflows in the menu cpuidle governor by making it discard the overflowing data points upfront (Rafael Wysocki). - Fix minor mistake in the recent update of the iowait boost computation in the intel_pstate driver (Rafael Wysocki). - Drop incorrect __init annotation from one function in the pxa2xx cpufreq driver (Arnd Bergmann). - Fix the operating performance points (OPP) framework initialization for devices in multiple power domains if only one of them is scalable (Rajendra Nayak). - Fix mistake in dev_pm_opp_set_rate() which causes it to skip updating the performance state if the new frequency is the same as the old one (Viresh Kumar). - Rework the cancellation of wakeup source timers to avoid potential issues with it and do some cleanups unlocked by that change (Viresh Kumar, Rafael Wysocki). - Clean up the code computing the active/suspended time of devices in the PM-runtime framework after recent changes (Ulf Hansson). - Make the power management infrastructure code use pr_fmt() consistently (Joe Perches). - Clean up the generic power domains (genpd) framework somewhat (Aisheng Dong). - Improve kerneldoc comments for two functions in the cpufreq core (Rafael Wysocki). - Fix typo in a PM QoS file description comment (Aisheng Dong). - Update the handling of CPU boost frequencies in the cpupower utility (Abhishek Goel)" * tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: governor: Add new governors to cpuidle_governors again cpufreq: intel_pstate: Fix up iowait_boost computation PM / OPP: Update performance state when freq == old_freq PM / wakeup: Drop wakeup_source_drop() PM / wakeup: Rework wakeup source timer cancellation PM / domains: Remove one unnecessary blank line PM / Domains: Return early for all errors in _genpd_power_off() PM / Domains: Improve warn for multiple states but no governor OPP: Fix handling of multiple power domains PM / QoS: Fix typo in file description cpufreq: pxa2xx: remove incorrect __init annotation PM-runtime: Call pm_runtime_active|suspended_time() from sysfs PM-runtime: Consolidate code to get active/suspended time PM: Add and use pr_fmt() cpufreq: Improve kerneldoc comments for cpufreq_cpu_get/put() cpuidle: menu: Avoid overflows when computing variance tools/power/cpupower: Display boost frequency separately
2019-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "More fixes in the queue: 1) Netfilter nat can erroneously register the device notifier twice, fix from Florian Westphal. 2) Use after free in nf_tables, from Pablo Neira Ayuso. 3) Parallel update of steering rule fix in mlx5 river, from Eli Britstein. 4) RX processing panic in lan743x, fix from Bryan Whitehead. 5) Use before initialization of TCP_SKB_CB, fix from Christoph Paasch. 6) Fix locking in SRIOV mode of mlx4 driver, from Jack Morgenstein. 7) Fix TX stalls in lan743x due to mishandling of interrupt ACKing modes, from Bryan Whitehead. 8) Fix infoleak in l2tp_ip6_recvmsg(), from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) pptp: dst_release sk_dst_cache in pptp_sock_destruct MAINTAINERS: GENET & SYSTEMPORT: Add internal Broadcom list l2tp: fix infoleak in l2tp_ip6_recvmsg() net/tls: Inform user space about send buffer availability net_sched: return correct value for *notify* functions lan743x: Fix TX Stall Issue net/mlx4_core: Fix qp mtt size calculation net/mlx4_core: Fix locking in SRIOV mode when switching between events and polling net/mlx4_core: Fix reset flow when in command polling mode mlxsw: minimal: Initialize base_mac mlxsw: core: Prevent duplication during QSFP module initialization net: dwmac-sun8i: fix a missing check of of_get_phy_mode net: sh_eth: fix a missing check of of_get_phy_mode net: 8390: fix potential NULL pointer dereferences net: fujitsu: fix a potential NULL pointer dereference net: qlogic: fix a potential NULL pointer dereference isdn: hfcpci: fix potential NULL pointer dereference Documentation: devicetree: add a new optional property for port mac address net: rocker: fix a potential NULL pointer dereference net: qlge: fix a potential NULL pointer dereference ...
2019-03-14Merge tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: - dmatest updates for modularizing common struct and code - remove SG support for VDMA xilinx IP and updates to driver - Update to dw driver to support Intel iDMA controllers multi-block support - tegra updates for proper reporting of residue - Add Snow Ridge ioatdma device id and support for IOATDMA v3.4 - struct_size() usage and useless LIST_HEAD cleanups in subsystem. - qDMA controller driver for Layerscape SoCs - stm32-dma PM Runtime support - And usual updates to imx-sdma, sprd, Documentation, fsl-edma, bcm2835, qcom_hidma etc * tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (81 commits) dmaengine: imx-sdma: fix consistent dma test failures dmaengine: imx-sdma: add a test for imx8mq multi sdma devices dmaengine: imx-sdma: add clock ratio 1:1 check dmaengine: dmatest: move test data alloc & free into functions dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func() dmaengine: dmatest: wrap src & dst data into a struct dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4 dmaengine: ioatdma: add descriptor pre-fetch support for v3.4 dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4 dmaengine: ioatdma: Add Snow Ridge ioatdma device id dmaengine: sprd: Change channel id to slave id for DMA cell specifier dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier dmaengine: mv_xor: Use correct device for DMA API Documentation :dmaengine: clarify DMA desc. pointer after submission Documentation: dmaengine: fix dmatest.rst warning dmaengine: k3dma: Add support for dma-channel-mask dmaengine: k3dma: Delete axi_config dmaengine: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware Documentation: bindings: dma: Add binding for dma-channel-mask Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp ...
2019-03-14Merge tag 'rproc-v5.1' of git://github.com/andersson/remoteprocLinus Torvalds
Pull remoteproc updates from Bjorn Andersson: "This contains the last patches in Loic's remoteproc resource table handling changes, a number of updates to documentation, support for invoking the crash handler (for testing purposes), a fix for the handling of virtio devices during recovery, performance state votes in Qualcomm modem driver, support for specifying board specific firmware path for Qualcomm modem driver and improved support for graceful shutdown of Qualcomm remoteprocs" * tag 'rproc-v5.1' of git://github.com/andersson/remoteproc: (33 commits) remoteproc: fix for "dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag" remoteproc: fix rproc_check_carveout_da() returned error and comments remoteproc: fix trace buffer va initialization remoteproc: fix rproc_alloc_carveout() for rproc with iommu domain remoteproc: add warning on resource table cast remoteproc: fix rproc_alloc_carveout() bad variable cast remoteproc: fix rproc_da_to_va in case of unallocated carveout remoteproc: correct rproc_mem_entry_init() comments remoteproc: fix recovery procedure rpmsg: virtio: change header file sort style rpmsg: virtio: allocate buffer from parent remoteproc: st: add reserved memory support remoteproc: create vdev subdevice with specific dma memory pool remoteproc: q6v5_adsp: Remove voting for lpass_aon clock dt-binding: remoteproc: Remove lpass_aon clock from adsp pil clock list remoteproc: q6v5-mss: Active powerdomain for SDM845 remoteproc: q6v5-mss: Vote for rpmh power domains remoteproc: qcom: Add support for parsing fw dt bindings remoteproc: qcom_q6v5: don't auto boot remote processor remoteproc: qcom: Wait for shutdown-ack/ind on sysmon shutdown ...
2019-03-14Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk subsystem updates from Stephen Boyd: "We have a fairly balanced mix of clk driver updates and clk framework updates this time around. It's the usual pile of new drivers for new hardware out there and the normal small fixes and updates, but then we have some core framework changes too. In the core framework, we introduce support for a clk_get_optional() API to get clks that may not always be populated and a way to devm manage clkdev lookups registered by provider drivers. We also do some refactoring to simplify the interface between clkdev and the common clk framework so we can reuse the DT parsing and clk_get() path in provider drivers in the future. This work will continue in the next few cycles while we convert how providers specify clk parents. On the driver side, the biggest part of the dirstat is the Amlogic clk driver that got support for the G12A SoC. It dominates with almost half the overall diff, while the second largest part of the diff is in the i.MX clk driver that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor and Qualcomm drivers rounding out the big part of the dirstat because they both got new hardware support for SoCs. The rest is just various updates and non-critical fixes for existing drivers. Core: - Convert a few clk bindings to JSON schema format - Add a {devm_}clk_get_optional() API - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups - Start rewriting clk parent registration and supporting device links by moving around code that supports clk_get() and DT parsing of the 'clocks' property New Drivers: - Add Qualcomm MSM8998 RPM managed clks - IPA clk support on Qualcomm RPMh clk controllers - Actions Semi S500 SoC clk support - Support for fixed rate clks populated from an MMIO register - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H - Add TMU (timer) clocks on Renesas RZ/G2E - Add Amlogic G12A Always-On Clock Controller - Add 32k clock generation for Amlogic AXG - Add support for the Mali GPU clocks on Amlogic Meson8 - Add Amlogic G12A EE clock controller driver - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E - Add i.MX8MM SoC clk driver support Removed Drivers: - Remove clps711x driver as the board support is gone Updates: - 3rd ECO fix for Mediatek MT2712 SoCs - Updates for Qualcomm MSM8998 GCC clks - Random static analysis fixes for clk drivers - Support for sleeping gpios in the clk-gpio type - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.) - Split LCDC into two clks on the Marvell MMP2 SoC - Various DT of_node refcount fixes - Get rid of CLK_IS_BASIC from TI code (yay!) - TI Autoidle clk support - Fix Amlogic Meson8 APB clock ID name - Claim input clocks through DT for Amlogic AXG and GXBB - Correct the DU (display unit) parent clock on Renesas RZ/G2E - Exynos5433 IMEM CMU crypto clk support (SlimSS) - Fix for the PLL-MIPI on the Allwinner A23 - Fix Rockchip rk3328 PLL rate calculation - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066 - i.MX SCU clk driver clk_set_parent() and cpufreq support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT clk: fixup default index for of_clk_get_by_name() clk: Move of_clk_*() APIs into clk.c from clkdev.c clk: Inform the core about consumer devices clk: Introduce of_clk_get_hw_from_clkspec() clk: core: clarify the check for runtime PM clk: Combine __clk_get() and __clk_create_clk() clk: imx8mq: add GPIO clocks to clock tree clk: mediatek: correct cpu clock name for MT8173 SoC clk: imx: Refactor entire sccg pll clk clk: imx: scu: add cpu frequency scaling support clk: mediatek: Mark bus and DRAM related clocks as critical clk: mediatek: Add flags to mtk_gate clk: mediatek: Add MUX_FLAGS macro clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks clk: ingenic: Remove set but not used variable 'enable' clk: at91: programmable: remove unneeded register read clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel clk: mediatek: add MUX_GATE_FLAGS_2 ...
2019-03-14Merge branches 'pm-core', 'pm-sleep' and 'pm-qos'Rafael J. Wysocki
* pm-core: PM-runtime: Call pm_runtime_active|suspended_time() from sysfs PM-runtime: Consolidate code to get active/suspended time * pm-sleep: PM / wakeup: Drop wakeup_source_drop() PM / wakeup: Rework wakeup source timer cancellation * pm-qos: PM / QoS: Fix typo in file description
2019-03-14Merge tag 'drm-misc-next-fixes-2019-03-13' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next - qxl: Remove the conflicting framebuffers earlier - Split out some i915 code into the fb_helper to allow the above Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190313192158.k3qssf733khsqodn@flea
2019-03-13ALSA: pcm: Fix function name in kernel-doc commentRicardo Biehl Pasquali
Signed-off-by: Ricardo Biehl Pasquali <pasqualirb@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-13Merge tag 'pwm/for-5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "The changes for this cycle are across the board. The bulk of it is cleanups, but there's also new device support in some drivers as well as more conversions to the atomic API" * tag 'pwm/for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (24 commits) pwm: atmel: Remove useless symbolic definitions pwm: bcm-kona: Update macros to remove braces around numbers pwm: imx27: Only enable the clocks once in .get_state() pwm: rcar: Improve calculation of divider pwm: rcar: Remove legacy APIs pwm: rcar: Use "atomic" API on rcar_pwm_resume() pwm: rcar: Add support "atomic" API pwm: atmel: Add support for SAM9X60's PWM controller pwm: atmel: Add PWM binding for SAM9X60 pwm: atmel: Rename objects of type atmel_pwm_data pwm: atmel: Add support for controllers with 32 bit counters pwm: atmel: Add struct atmel_pwm_data pwm: Add MediaTek MT8183 display PWM driver support pwm: hibvt: Add hi3559v100 support dt-bindings: pwm: hibvt: Add hi3559v100 support pwm: hibvt: Use individual struct per of-data pwm: imx: Signedness bug in imx_pwm_get_state() pwm: imx: Split into two drivers pwm: imx: Don't print an error on -EPROBE_DEFER pwm: imx: Set driver data earlier simplifying the end of ->probe() ...
2019-03-13Merge tag 'mailbox-v5.1' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - mailbox-test: support multiple controller instances - misc cleanup: IMX, STM32 and Tegra - new driver: ZynqMP IPI * tag 'mailbox-v5.1' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: imx: keep MU irq working during suspend/resume dt-bindings: mailbox: Add Xilinx IPI Mailbox mailbox: ZynqMP IPI mailbox controller mailbox: stm32-ipcc: remove useless device_init_wakeup call mailbox: stm32-ipcc: do not enable wakeup source by default mailbox: mailbox-test: fix null pointer if no mmio mailbox: mailbox-test: fix debugfs in multi-instances mailbox: tegra-hsp: mark suspend function as __maybe_unused
2019-03-13Merge tag 'libnvdimm-for-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The bulk of this has been in -next since before the merge window opened, with no known collisions / issues reported. The only detail worth noting, outside the summary below, is that the "libnvdimm-start-pad" topic has been truncated to just cleanups and small fixes. The full topic branch would have doubled down on hacks around the "section alignment" limitation of the core-mm, instead effort is now being spent to address that root issue in the memory hotplug implementation for v5.2. - Fix nfit-bus command submission regression - Support retrieval of short-ARS results if the ARS state is "requires continuation", and even if the "no_init_ars" module parameter is specified - Allow busy-polling of the kernel ARS state by allowing root to reset the exponential back-off timer - Filter potentially stale ARS results by tracking query-ARS relative to the previous start-ARS - Enhance dax_device alignment checks - Add support for the Hyper-V family of device-specific-methods (DSMs) - Add several fixes and workarounds for Hyper-V compatibility - Fix support to cache the dirty-shutdown-count at init" * tag 'libnvdimm-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (25 commits) libnvdimm/namespace: Clean up holder_class_store() libnvdimm/of_pmem: Fix platform_no_drv_owner.cocci warnings acpi/nfit: Update NFIT flags error message libnvdimm/btt: Fix LBA masking during 'free list' population libnvdimm/btt: Remove unnecessary code in btt_freelist_init libnvdimm/pfn: Remove dax_label_reserve dax: Check the end of the block-device capacity with dax_direct_access() nfit/ars: Avoid stale ARS results nfit/ars: Allow root to busy-poll the ARS state machine nfit/ars: Introduce scrub_flags nfit/ars: Remove ars_start_flags nfit/ars: Attempt short-ARS even in the no_init_ars case nfit/ars: Attempt a short-ARS whenever the ARS state is idle at boot acpi/nfit: Require opt-in for read-only label configurations libnvdimm/pmem: Honor force_raw for legacy pmem regions libnvdimm/pfn: Account for PAGE_SIZE > info-block-size in nd_pfn_init() libnvdimm: Fix altmap reservation size calculation libnvdimm, pfn: Fix over-trim in trim_pfn_device() acpi/nfit: Fix bus command validation libnvdimm/dimm: Add a no-BLK quirk based on NVDIMM family ...
2019-03-13Merge tag 'upstream-5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI and UBIFS updates from Richard Weinberger: - A new interface for UBI to deal better with read disturb - Reject unsupported ioctl flags in UBIFS (xfstests found it) * tag 'upstream-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: wl: Silence uninitialized variable warning ubifs: Reject unsupported ioctl flags explicitly ubi: Expose the bitrot interface ubi: Introduce in_pq()
2019-03-13tracing: kdb: Fix ftdump to not sleepDouglas Anderson
As reported back in 2016-11 [1], the "ftdump" kdb command triggers a BUG for "sleeping function called from invalid context". kdb's "ftdump" command wants to call ring_buffer_read_prepare() in atomic context. A very simple solution for this is to add allocation flags to ring_buffer_read_prepare() so kdb can call it without triggering the allocation error. This patch does that. Note that in the original email thread about this, it was suggested that perhaps the solution for kdb was to either preallocate the buffer ahead of time or create our own iterator. I'm hoping that this alternative of adding allocation flags to ring_buffer_read_prepare() can be considered since it means I don't need to duplicate more of the core trace code into "trace_kdb.c" (for either creating my own iterator or re-preparing a ring allocator whose memory was already allocated). NOTE: another option for kdb is to actually figure out how to make it reuse the existing ftrace_dump() function and totally eliminate the duplication. This sounds very appealing and actually works (the "sr z" command can be seen to properly dump the ftrace buffer). The downside here is that ftrace_dump() fully consumes the trace buffer. Unless that is changed I'd rather not use it because it means "ftdump | grep xyz" won't be very useful to search the ftrace buffer since it will throw away the whole trace on the first grep. A future patch to dump only the last few lines of the buffer will also be hard to implement. [1] https://lkml.kernel.org/r/20161117191605.GA21459@google.com Link: http://lkml.kernel.org/r/20190308193205.213659-1-dianders@chromium.org Reported-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-12f2fs: print more parameters in trace_f2fs_map_blocksChao Yu
for better map_blocks trace. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12f2fs: trace f2fs_ioc_shutdownChao Yu
This patch supports to trace f2fs_ioc_shutdown. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12f2fs: correct spelling mistakeZeng Guangyue
correct spelling mistake for "nunmber" Signed-off-by: Zeng Guangyue <zengguangyue@hisilicon.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12Merge tag 'ceph-for-5.1-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "The highlights are: - rbd will now ignore discards that aren't aligned and big enough to actually free up some space (myself). This is controlled by the new alloc_size map option and can be disabled if needed. - support for rbd deep-flatten feature (myself). Deep-flatten allows "rbd flatten" to fully disconnect the clone image and its snapshots from the parent and make the parent snapshot removable. - a new round of cap handling improvements (Zheng Yan). The kernel client should now be much more prompt about releasing its caps and it is possible to put a limit on the number of caps held. - support for getting ceph.dir.pin extended attribute (Zheng Yan)" * tag 'ceph-for-5.1-rc1' of git://github.com/ceph/ceph-client: (26 commits) Documentation: modern versions of ceph are not backed by btrfs rbd: advertise support for RBD_FEATURE_DEEP_FLATTEN rbd: whole-object write and zeroout should copyup when snapshots exist rbd: copyup with an empty snapshot context (aka deep-copyup) rbd: introduce rbd_obj_issue_copyup_ops() rbd: stop copying num_osd_ops in rbd_obj_issue_copyup() rbd: factor out __rbd_osd_req_create() rbd: clear ->xferred on error from rbd_obj_issue_copyup() rbd: remove experimental designation from kernel layering ceph: add mount option to limit caps count ceph: periodically trim stale dentries ceph: delete stale dentry when last reference is dropped ceph: remove dentry_lru file from debugfs ceph: touch existing cap when handling reply ceph: pass inclusive lend parameter to filemap_write_and_wait_range() rbd: round off and ignore discards that are too small rbd: handle DISCARD and WRITE_ZEROES separately rbd: get rid of obj_req->obj_request_count libceph: use struct_size() for kmalloc() in crush_decode() ceph: send cap releases more aggressively ...
2019-03-12Merge tag 'nfs-for-5.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "Highlights include: Stable fixes: - Fixes for NFS I/O request leakages - Fix error handling paths in the NFS I/O recoalescing code - Reinitialise NFSv4.1 sequence results before retransmitting a request - Fix a soft lockup in the delegation recovery code - Bulk destroy of layouts needs to be safe w.r.t. umount - Prevent thundering herd issues when the SUNRPC socket is not connected - Respect RPC call timeouts when retrying transmission Features: - Convert rpc auth layer to use xdr_streams - Config option to disable insecure RPCSEC_GSS crypto types - Reduce size of RPC receive buffers - Readdirplus optimization by cache mechanism - Convert SUNRPC socket send code to use iov_iter() - SUNRPC micro-optimisations to avoid indirect calls - Add support for the pNFS LAYOUTERROR operation and use it with the pNFS/flexfiles driver - Add trace events to report non-zero NFS status codes - Various removals of unnecessary dprintks Bugfixes and cleanups: - Fix a number of sparse warnings and documentation format warnings - Fix nfs_parse_devname to not modify it's argument - Fix potential corruption of page being written through pNFS/blocks - fix xfstest generic/099 failures on nfsv3 - Avoid NFSv4.1 "false retries" when RPC calls are interrupted - Abort I/O early if the pNFS/flexfiles layout segment was invalidated - Avoid unnecessary pNFS/flexfiles layout invalidations" * tag 'nfs-for-5.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (90 commits) SUNRPC: Take the transport send lock before binding+connecting SUNRPC: Micro-optimise when the task is known not to be sleeping SUNRPC: Check whether the task was transmitted before rebind/reconnect SUNRPC: Remove redundant calls to RPC_IS_QUEUED() SUNRPC: Clean up SUNRPC: Respect RPC call timeouts when retrying transmission SUNRPC: Fix up RPC back channel transmission SUNRPC: Prevent thundering herd when the socket is not connected SUNRPC: Allow dynamic allocation of back channel slots NFSv4.1: Bump the default callback session slot count to 16 SUNRPC: Convert remaining GFP_NOIO, and GFP_NOWAIT sites in sunrpc NFS/flexfiles: Clean up mirror DS initialisation NFS/flexfiles: Remove dead code in ff_layout_mirror_valid() NFS/flexfile: Simplify nfs4_ff_layout_select_ds_stateid() NFS/flexfile: Simplify nfs4_ff_layout_ds_version() NFS/flexfiles: Simplify ff_layout_get_ds_cred() NFS/flexfiles: Simplify nfs4_ff_find_or_create_ds_client() NFS/flexfiles: Simplify nfs4_ff_layout_select_ds_fh() NFS/flexfiles: Speed up read failover when DSes are down NFS/flexfiles: Don't invalidate DS deviceids for being unresponsive ...
2019-03-12Merge tag 'fuse-update-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: "Scalability and performance improvements, as well as minor bug fixes and cleanups" * tag 'fuse-update-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (25 commits) fuse: cache readdir calls if filesystem opts out of opendir fuse: support clients that don't implement 'opendir' fuse: lift bad inode checks into callers fuse: multiplex cached/direct_io file operations fuse add copy_file_range to direct io fops fuse: use iov_iter based generic splice helpers fuse: Switch to using async direct IO for FOPEN_DIRECT_IO fuse: use atomic64_t for khctr fuse: clean up aborted fuse: Protect ff->reserved_req via corresponding fi->lock fuse: Protect fi->nlookup with fi->lock fuse: Introduce fi->lock to protect write related fields fuse: Convert fc->attr_version into atomic64_t fuse: Add fuse_inode argument to fuse_prepare_release() fuse: Verify userspace asks to requeue interrupt that we really sent fuse: Do some refactoring in fuse_dev_do_write() fuse: Wake up req->waitq of only if not background fuse: Optimize request_end() by not taking fiq->waitq.lock fuse: Kill fasync only if interrupt is queued in queue_interrupt() fuse: Remove stale comment in end_requests() ...
2019-03-12Merge branch 'work.mount' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount infrastructure updates from Al Viro: "The rest of core infrastructure; no new syscalls in that pile, but the old parts are switched to new infrastructure. At that point conversions of individual filesystems can happen independently; some are done here (afs, cgroup, procfs, etc.), there's also a large series outside of that pile dealing with NFS (quite a bit of option-parsing stuff is getting used there - it's one of the most convoluted filesystems in terms of mount-related logics), but NFS bits are the next cycle fodder. It got seriously simplified since the last cycle; documentation is probably the weakest bit at the moment - I considered dropping the commit introducing Documentation/filesystems/mount_api.txt (cutting the size increase by quarter ;-), but decided that it would be better to fix it up after -rc1 instead. That pile allows to do followup work in independent branches, which should make life much easier for the next cycle. fs/super.c size increase is unpleasant; there's a followup series that allows to shrink it considerably, but I decided to leave that until the next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits) afs: Use fs_context to pass parameters over automount afs: Add fs_context support vfs: Add some logging to the core users of the fs_context log vfs: Implement logging through fs_context vfs: Provide documentation for new mount API vfs: Remove kern_mount_data() hugetlbfs: Convert to fs_context cpuset: Use fs_context kernfs, sysfs, cgroup, intel_rdt: Support fs_context cgroup: store a reference to cgroup_ns into cgroup_fs_context cgroup1_get_tree(): separate "get cgroup_root to use" into a separate helper cgroup_do_mount(): massage calling conventions cgroup: stash cgroup_root reference into cgroup_fs_context cgroup2: switch to option-by-option parsing cgroup1: switch to option-by-option parsing cgroup: take options parsing into ->parse_monolithic() cgroup: fold cgroup1_mount() into cgroup1_get_tree() cgroup: start switching to fs_context ipc: Convert mqueue fs to fs_context proc: Add fs_context support to procfs ...
2019-03-12Merge branch 'work.iov_iter' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull iov_iter updates from Al Viro: "A couple of iov_iter patches - Christoph's crapectomy (the last remaining user of iov_for_each() went away with lustre, IIRC) and Eric'c optimization of sanity checks" * 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: iov_iter: optimize page_copy_sane() uio: remove the unused iov_for_each macro