Age | Commit message (Collapse) | Author |
|
Add a possible_interfaces member to struct phy_device to indicate which
interfaces a clause 45 PHY may switch between depending on the media.
This must be populated by the PHY driver by the time the .config_init()
method completes according to the PHYs host-side configuration.
For example, the Marvell 88x3310 PHY can switch between 10GBASE-R,
5GBASE-R, 2500BASE-X, and SGMII on the host side depending on the media
side speed, so all these interface modes are set in the
possible_interfaces member.
This allows phylib users (such as phylink) to know in advance which
interface modes to expect, which allows them to appropriately restrict
the advertised link modes according to the capabilities of other parts
of the link.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add a supported_interfaces member to phylib so we know which
interfaces a PHY supports. Currently, set any unconverted driver
to indicate all interfaces are supported.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Provide phy driver start/stop hooks so that the PHY driver knows when
the network driver is starting or stopping. This will be used for the
Marvell 10G driver so that we can sanely refuse to start if the PHYs
firmware is not present, and also so that we can sanely support SFPs
behind the PHY.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Allow phylib drivers to pass the hardware-resolved pause state to MAC
drivers, rather than using the software-based pause resolution code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
There are several places which open code comparing PHY IDs. Provide a
couple of helpers to assist with this, using a slightly simpler test
than the original:
- phy_id_compare() compares two arbitary PHY IDs and a mask of the
significant bits in the ID.
- phydev_id_compare() compares the bound phydev with the specified
PHY ID, using the bound driver's mask.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
We currently parse the SFP EEPROM to a bitmap of ethtool link modes,
and then attempt to convert the link modes to a PHY interface mode.
While this works at present, there are cases where this is sub-optimal.
For example, where a module can operate with several different PHY
interface modes.
To start addressing this, arrange for the SFP EEPROM parsing to also
provide a bitmap of the possible PHY interface modes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Add DSA support for the phylink mac_prepare() and mac_finish() calls.
These were introduced last year at phylink level as part of the PCS
support.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
As there are no users of phylink_helper_basex_speed(), we can now
remove this functionality.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add the following unlocked accessors to complete the set:
__mdiobus_modify()
__mdiodev_read()
__mdiodev_write()
__mdiodev_modify()
__mdiodev_modify_changed()
which we will need for Marvell DSA PCS conversion.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add phylink_pcs_inband() to indicate whether the PCS should be using
inband signalling.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add phylink PCS enable/disable callbacks that will allow us to place
IEEE 802.3 register compliant PCS in power-down mode while not being
used.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
phylink_set_10g_modes() is no longer used with the conversion of
drivers to phylink_generic_validate(), so we can remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
phylink_config's pcs_poll is no longer used, let's get rid of it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
With drivers converted over to using phylink PCS, there is no need for
the struct dsa_switch member "pcs_poll" to exist anymore - there is a
flag in the struct phylink_pcs which indicates whether this PCS needs
to be polled which supersedes this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add DSA support for the phylink mac_select_pcs() method so DSA drivers
can return provide phylink with the appropriate PCS for the PHY
interface mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
stmmac explicitly calls the xpcs driver to validate the ethtool
linkmodes. This is no longer necessary as phylink now supports
validation through a PCS method. Convert both drivers to use this
new mechanism.
Tested-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add a function to the xpcs driver to retrieve the supported PHY
interface modes, which can be used by drivers to fill in phylink's
supported_interfaces mask.
We validate the interface bit index to ensure that it fits within the
bitmap as xpcs lists PHY_INTERFACE_MODE_MAX in an entry.
Tested-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add a hook for PCS to validate the link parameters. This avoids MAC
drivers having to have knowledge of their PCS in their validate()
method, thereby allowing several MAC drivers to be simplfied.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
mac_select_pcs() allows us to have an explicit point to query which
PCS the MAC wishes to use for a particular PHY interface mode, thereby
allowing us to add support to validate the link settings with the PCS.
Phylink will also use this to select the PCS to be used during a major
configuration event without the MAC driver needing to call
phylink_set_pcs().
Note that if mac_select_pcs() is present, the supported_interfaces
bitmap must be filled in; this avoids mac_select_pcs() being called
with PHY_INTERFACE_MODE_NA when we want to get support for all
interface types. Phylink will return an error in phylink_create()
unless this condition is satisfied.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Use the legacy flag to indicate whether we should operate in legacy
mode. This allows us to stop using the presence of a PCS as an
indicator to the age of the phylink user, and make PCS presence
optional.
Legacy mode involves:
1) calling mac_config() whenever the link comes up
2) calling mac_config() whenever the inband advertisement changes,
possibly followed by a call to mac_an_restart()
3) making use of mac_an_restart()
4) making use of mac_pcs_get_state()
All the above functionality was moved to a seperate "PCS" block of
operations in March 2020.
Update the documents to indicate that the differences that this flag
makes.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add a boolean to phylink_config to indicate whether a driver has not
been updated for the changes in commit 7cceb599d15d ("net: phylink:
avoid mac_config calls"), and thus are reliant on the old behaviour.
We were currently keying the phylink behaviour on the presence of a
PCS, but this is sub-optimal for modern drivers that may not have a
PCS.
This commit merely introduces the new flag, but does not add any use,
since we need all legacy drivers to set this flag before it can be
used. Once these legacy drivers have been updated, we can remove this
flag.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Phylink needs slightly more information than phylink_get_interfaces()
allows us to get from the DSA drivers - we need the MAC capabilities.
Replace the phylink_get_interfaces() method with phylink_get_caps() to
allow DSA drivers to fill in the phylink_config MAC capabilities field
as well.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Some devices expose memory-mapped c22-compliant PHYs. Because these
devices do not have an MDIO bus, we cannot use the existing helpers.
Refactor the existing helpers to allow supplying the values for c22
registers directly, instead of using MDIO to access them. Only get_state
and set_adversisement are converted, since they contain the most complex
logic.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add a generic validate() implementation using the supported_interfaces
and a bitmask of MAC pause/speed/duplex capabilities. This allows us
to entirely eliminate many driver private validate() implementations.
We expose the underlying phylink_get_linkmodes() function so that
drivers which have special needs can still benefit from conversion.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Pull drm fixes from Dave Airlie:
"There is only the amdgpu runtime pm regression fix in here:
amdgpu:
- suspend/resume fix
- fix runtime PM regression"
* tag 'drm-fixes-2022-01-07' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: disable runpm if we are the primary adapter
fbdev: fbmem: add a helper to determine if an aperture is used by a fw fb
drm/amd/pm: keep the BACO feature enabled for suspend
|
|
ssh://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.16-2021-12-31:
amdgpu:
- Suspend/resume fix
- Restore runtime pm behavior with efifb
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211231143825.11479-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski"
"Networking fixes, including fixes from bpf, and WiFi. One last pull
request, turns out some of the recent fixes did more harm than good.
Current release - regressions:
- Revert "xsk: Do not sleep in poll() when need_wakeup set", made the
problem worse
- Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in
__fixed_phy_register", broke EPROBE_DEFER handling
- Revert "net: usb: r8152: Add MAC pass-through support for more
Lenovo Docks", broke setups without a Lenovo dock
Current release - new code bugs:
- selftests: set amt.sh executable
Previous releases - regressions:
- batman-adv: mcast: don't send link-local multicast to mcast routers
Previous releases - always broken:
- ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY
- sctp: hold endpoint before calling cb in
sctp_transport_lookup_process
- mac80211: mesh: embed mesh_paths and mpp_paths into
ieee80211_if_mesh to avoid complicated handling of sub-object
allocation failures
- seg6: fix traceroute in the presence of SRv6
- tipc: fix a kernel-infoleak in __tipc_sendmsg()"
* tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
selftests: set amt.sh executable
Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks"
sfc: The RX page_ring is optional
iavf: Fix limit of total number of queues to active queues of VF
i40e: Fix incorrect netdev's real number of RX/TX queues
i40e: Fix for displaying message regarding NVM version
i40e: fix use-after-free in i40e_sync_filters_subtask()
i40e: Fix to not show opcode msg on unsuccessful VF MAC change
ieee802154: atusb: fix uninit value in atusb_set_extended_addr
mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
mac80211: initialize variable have_higher_than_11mbit
sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc
netrom: fix copying in user data in nr_setsockopt
udp6: Use Segment Routing Header for dest address if present
icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
seg6: export get_srh() for ICMP handling
Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
ipv6: Do cleanup if attribute validation fails in multipath route
ipv6: Continue processing multipath route even if gateway attribute is invalid
net/fsl: Remove leftover definition in xgmac_mdio
...
|
|
When finding the socket to report an error on, if the invoking packet
is using Segment Routing, the IPv6 destination address is that of an
intermediate router, not the end destination. Extract the ultimate
destination address from the segment address.
This change allows traceroute to function in the presence of Segment
Routing.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RFC8754 says:
ICMP error packets generated within the SR domain are sent to source
nodes within the SR domain. The invoking packet in the ICMP error
message may contain an SRH. Since the destination address of a packet
with an SRH changes as each segment is processed, it may not be the
destination used by the socket or application that generated the
invoking packet.
For the source of an invoking packet to process the ICMP error
message, the ultimate destination address of the IPv6 header may be
required. The following logic is used to determine the destination
address for use by protocol-error handlers.
* Walk all extension headers of the invoking IPv6 packet to the
routing extension header preceding the upper-layer header.
- If routing header is type 4 Segment Routing Header (SRH)
o The SID at Segment List[0] may be used as the destination
address of the invoking packet.
Mangle the skb so the network header points to the invoking packet
inside the ICMP packet. The seg6 helpers can then be used on the skb
to find any segment routing headers. If found, mark this fact in the
IPv6 control block of the skb, and store the offset into the packet of
the SRH. Then restore the skb back to its old state.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An ICMP error message can contain in its message body part of an IPv6
packet which invoked the error. Such a packet might contain a segment
router header. Export get_srh() so the ICMP code can make use of it.
Since his changes the scope of the function from local to global, add
the seg6_ prefix to keep the namespace clean. And move it into seg6.c
so it is always available, not just when IPV6_SEG6_LWTUNNEL is
enabled.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The same fix in commit 5ec7d18d1813 ("sctp: use call_rcu to free endpoint")
is also needed for dumping one asoc and sock after the lookup.
Fixes: 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mike Galbraith, Alexey Avramov and Darrick Wong all reported similar
problems due to reclaim throttling for excessive lengths of time. In
Alexey's case, a memory hog that should go OOM quickly stalls for
several minutes before stalling. In Mike and Darrick's cases, a small
memcg environment stalled excessively even though the system had enough
memory overall.
Commit 69392a403f49 ("mm/vmscan: throttle reclaim when no progress is
being made") introduced the problem although commit a19594ca4a8b
("mm/vmscan: increase the timeout if page reclaim is not making
progress") made it worse. Systems at or near an OOM state that cannot
be recovered must reach OOM quickly and memcg should kill tasks if a
memcg is near OOM.
To address this, only stall for the first zone in the zonelist, reduce
the timeout to 1 tick for VMSCAN_THROTTLE_NOPROGRESS and only stall if
the scan control nr_reclaimed is 0, kswapd is still active and there
were excessive pages pending for writeback. If kswapd has stopped
reclaiming due to excessive failures, do not stall at all so that OOM
triggers relatively quickly. Similarly, if an LRU is simply congested,
only lightly throttle similar to NOPROGRESS.
Alexey's original case was the most straight forward
for i in {1..3}; do tail /dev/zero; done
On vanilla 5.16-rc1, this test stalled heavily, after the patch the test
completes in a few seconds similar to 5.15.
Alexey's second test case added watching a youtube video while tail runs
10 times. On 5.15, playback only jitters slightly, 5.16-rc1 stalls a
lot with lots of frames missing and numerous audio glitches. With this
patch applies, the video plays similarly to 5.15.
[lkp@intel.com: Fix W=1 build warning]
Link: https://lore.kernel.org/r/99e779783d6c7fce96448a3402061b9dc1b3b602.camel@gmx.de
Link: https://lore.kernel.org/r/20211124011954.7cab9bb4@mail.inbox.lv
Link: https://lore.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net
Link: https://lore.kernel.org/r/20211202150614.22440-1-mgorman@techsingularity.net
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/20211124011954.7cab9bb4@mail.inbox.lv/
Reported-and-tested-by: Alexey Avramov <hakavlad@inbox.lv>
Reported-and-tested-by: Mike Galbraith <efault@gmx.de>
Reported-and-tested-by: Darrick J. Wong <djwong@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Tracked-by: Thorsten Leemhuis <regressions@leemhuis.info>
Fixes: 69392a403f49 ("mm/vmscan: throttle reclaim when no progress is being made")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a function for drivers to check if the a firmware initialized
fb is corresponds to their aperture. This allows drivers to check if the
device corresponds to what the firmware set up as the display device.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215203
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1840
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from.. Santa?
No regressions on our radar at this point. The igc problem fixed here
was the last one I was tracking but it was broken in previous
releases, anyway. Mostly driver fixes and a couple of largish SMC
fixes.
Current release - regressions:
- xsk: initialise xskb free_list_node, fixup for a -rc7 fix
Current release - new code bugs:
- mlx5: handful of minor fixes:
- use first online CPU instead of hard coded CPU
- fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'
- fix skb memory leak when TC classifier action offloads are disabled
- fix memory leak with rules with internal OvS port
Previous releases - regressions:
- igc: do not enable crosstimestamping for i225-V models
Previous releases - always broken:
- udp: use datalen to cap ipv6 udp max gso segments
- fix use-after-free in tw_timer_handler due to early free of stats
- smc: fix kernel panic caused by race of smc_sock
- smc: don't send CDC/LLC message if link not ready, avoid timeouts
- sctp: use call_rcu to free endpoint, avoid UAF in sock diag
- bridge: mcast: add and enforce query interval minimum
- usb: pegasus: do not drop long Ethernet frames
- mlx5e: fix ICOSQ recovery flow for XSK
- nfc: uapi: use kernel size_t to fix user-space builds"
* tag 'net-5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
fsl/fman: Fix missing put_device() call in fman_port_probe
selftests: net: using ping6 for IPv6 in udpgro_fwd.sh
Documentation: fix outdated interpretation of ip_no_pmtu_disc
net/ncsi: check for error return from call to nla_put_u32
net: bridge: mcast: fix br_multicast_ctx_vlan_global_disabled helper
net: fix use-after-free in tw_timer_handler
selftests: net: Fix a typo in udpgro_fwd.sh
selftests/net: udpgso_bench_tx: fix dst ip argument
net: bridge: mcast: add and enforce startup query interval minimum
net: bridge: mcast: add and enforce query interval minimum
ipv6: raw: check passed optlen before reading
xsk: Initialise xskb free_list_node
net/mlx5e: Fix wrong features assignment in case of error
net/mlx5e: TC, Fix memory leak with rules with internal port
ionic: Initialize the 'lif->dbid_inuse' bitmap
igc: Fix TX timestamp support for non-MSI-X platforms
igc: Do not enable crosstimestamping for i225-V models
net/smc: fix kernel panic caused by race of smc_sock
net/smc: don't send CDC/LLC message if link not ready
NFC: st21nfca: Fix memory leak in device probe and remove
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"Another EFI fix for v5.16:
- Prevent missing prototype warning from breaking the build under
CONFIG_WERROR=y"
* tag 'efi-urgent-for-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Move efifb_setup_from_dmi() prototype from arch headers
|
|
Fix user-space builds if it includes /usr/include/linux/nfc.h before
some of other headers:
/usr/include/linux/nfc.h:281:9: error: unknown type name ‘size_t’
281 | size_t service_name_len;
| ^~~~~~
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace sa_family_t with __kernel_sa_family_t to fix the following
linux/nfc.h userspace compilation errors:
/usr/include/linux/nfc.h:266:2: error: unknown type name 'sa_family_t'
sa_family_t sa_family;
/usr/include/linux/nfc.h:274:2: error: unknown type name 'sa_family_t'
sa_family_t sa_family;
Fixes: 23b7869c0fd0 ("NFC: add the NFC socket raw protocol")
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Prevent clang from reordering the reachable annotation in
an inline asm statement without inputs
- Fix objtool builds on non-glibc systems due to undefined
__always_inline
* tag 'objtool_urgent_for_v5.16_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
compiler.h: Fix annotation macro misplacement with Clang
uapi: Fix undefined __always_inline on non-glibc systems
|
|
Merge misc fixes from Andrew Morton:
"9 patches.
Subsystems affected by this patch series: mm (kfence, mempolicy,
memory-failure, pagemap, pagealloc, damon, and memory-failure),
core-kernel, and MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page()
mm/damon/dbgfs: protect targets destructions with kdamond_lock
mm/page_alloc: fix __alloc_size attribute for alloc_pages_exact_nid
mm: delete unsafe BUG from page_cache_add_speculative()
mm, hwpoison: fix condition in free hugetlb page path
MAINTAINERS: mark more list instances as moderated
kernel/crash_core: suppress unknown crashkernel parameter warning
mm: mempolicy: fix THP allocations escaping mempolicy restrictions
kfence: fix memory leak when cat kfence objects
|
|
The second parameter of alloc_pages_exact_nid is the one indicating the
size of memory pointed by the returned pointer.
Link: https://lkml.kernel.org/r/YbjEgwhn4bGblp//@coeus
Fixes: abd58f38dfb4 ("mm/page_alloc: add __alloc_size attributes for better bounds checking")
Signed-off-by: Thibaut Sautereau <thibaut.sautereau@ssi.gouv.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Levente Polyak <levente@leventepolyak.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It is not easily reproducible, but on 5.16-rc I have several times hit
the VM_BUG_ON_PAGE(PageTail(page), page) in
page_cache_add_speculative(): usually from filemap_get_read_batch() for
an ext4 read, yesterday from next_uptodate_page() from
filemap_map_pages() for a shmem fault.
That BUG used to be placed where page_ref_add_unless() had succeeded,
but now it is placed before folio_ref_add_unless() is attempted: that is
not safe, since it is only the acquired reference which makes the page
safe from racing THP collapse or split.
We could keep the BUG, checking PageTail only when
folio_ref_try_add_rcu() has succeeded; but I don't think it adds much
value - just delete it.
Link: https://lkml.kernel.org/r/8b98fc6f-3439-8614-c3f3-945c659a1aba@google.com
Fixes: 020853b6f5ea ("mm: Add folio_try_get_rcu()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch is to delay the endpoint free by calling call_rcu() to fix
another use-after-free issue in sctp_sock_dump():
BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20
Call Trace:
__lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218
lock_acquire+0x1ed/0x520 kernel/locking/lockdep.c:3844
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
_raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168
spin_lock_bh include/linux/spinlock.h:334 [inline]
__lock_sock+0x203/0x350 net/core/sock.c:2253
lock_sock_nested+0xfe/0x120 net/core/sock.c:2774
lock_sock include/net/sock.h:1492 [inline]
sctp_sock_dump+0x122/0xb20 net/sctp/diag.c:324
sctp_for_each_transport+0x2b5/0x370 net/sctp/socket.c:5091
sctp_diag_dump+0x3ac/0x660 net/sctp/diag.c:527
__inet_diag_dump+0xa8/0x140 net/ipv4/inet_diag.c:1049
inet_diag_dump+0x9b/0x110 net/ipv4/inet_diag.c:1065
netlink_dump+0x606/0x1080 net/netlink/af_netlink.c:2244
__netlink_dump_start+0x59a/0x7c0 net/netlink/af_netlink.c:2352
netlink_dump_start include/linux/netlink.h:216 [inline]
inet_diag_handler_cmd+0x2ce/0x3f0 net/ipv4/inet_diag.c:1170
__sock_diag_cmd net/core/sock_diag.c:232 [inline]
sock_diag_rcv_msg+0x31d/0x410 net/core/sock_diag.c:263
netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2477
sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:274
This issue occurs when asoc is peeled off and the old sk is freed after
getting it by asoc->base.sk and before calling lock_sock(sk).
To prevent the sk free, as a holder of the sk, ep should be alive when
calling lock_sock(). This patch uses call_rcu() and moves sock_put and
ep free into sctp_endpoint_destroy_rcu(), so that it's safe to try to
hold the ep under rcu_read_lock in sctp_transport_traverse_process().
If sctp_endpoint_hold() returns true, it means this ep is still alive
and we have held it and can continue to dump it; If it returns false,
it means this ep is dead and can be freed after rcu_read_unlock, and
we should skip it.
In sctp_sock_dump(), after locking the sk, if this ep is different from
tsp->asoc->ep, it means during this dumping, this asoc was peeled off
before calling lock_sock(), and the sk should be skipped; If this ep is
the same with tsp->asoc->ep, it means no peeloff happens on this asoc,
and due to lock_sock, no peeloff will happen either until release_sock.
Note that delaying endpoint free won't delay the port release, as the
port release happens in sctp_endpoint_destroy() before calling call_rcu().
Also, freeing endpoint by call_rcu() makes it safe to access the sk by
asoc->base.sk in sctp_assocs_seq_show() and sctp_rcv().
Thanks Jones to bring this issue up.
v1->v2:
- improve the changelog.
- add kfree(ep) into sctp_endpoint_destroy_rcu(), as Jakub noticed.
Reported-by: syzbot+9276d76e83e3bcde6c99@syzkaller.appspotmail.com
Reported-by: Lee Jones <lee.jones@linaro.org>
Fixes: d25adbeb0cdb ("sctp: fix an use-after-free issue in sctp_sock_dump")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- revert "tipc: use consistent GFP flags"
Previous releases - regressions:
- igb: fix deadlock caused by taking RTNL in runtime resume path
- accept UFOv6 packages in virtio_net_hdr_to_skb
- netfilter: fix regression in looped (broad|multi)cast's MAC
handling
- bridge: fix ioctl old_deviceless bridge argument
- ice: xsk: do not clear status_error0 for ntu + nb_buffs descriptor,
avoid stalls when multiple sockets use an interface
Previous releases - always broken:
- inet: fully convert sk->sk_rx_dst to RCU rules
- veth: ensure skb entering GRO are not cloned
- sched: fix zone matching for invalid conntrack state
- bonding: fix ad_actor_system option setting to default
- nf_tables: fix use-after-free in nft_set_catchall_destroy()
- lantiq_xrx200: increase buffer reservation to avoid mem corruption
- ice: xsk: avoid leaking app buffers during clean up
- tun: avoid double free in tun_free_netdev"
* tag 'net-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5M
r8152: sync ocp base
r8152: fix the force speed doesn't work for RTL8156
net: bridge: fix ioctl old_deviceless bridge argument
net: stmmac: ptp: fix potentially overflowing expression
net: dsa: tag_ocelot: use traffic class to map priority on injected header
veth: ensure skb entering GRO are not cloned.
asix: fix wrong return value in asix_check_host_enable()
asix: fix uninit-value in asix_mdio_read()
sfc: falcon: Check null pointer of rx_queue->page_ring
sfc: Check null pointer of rx_queue->page_ring
net: ks8851: Check for error irq
drivers: net: smc911x: Check for error irq
fjes: Check for error irq
bonding: fix ad_actor_system option setting to default
igb: fix deadlock caused by taking RTNL in RPM resume path
gve: Correct order of processing device options
net: skip virtio_net_hdr_set_proto if protocol already set
net: accept UFOv6 packages in virtio_net_hdr_to_skb
docs: networking: replace skb_hwtstamp_tx with skb_tstamp_tx
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is my last set of fixes for 5.16, including
- multiple code fixes for the op-tee firmware driver
- Two patches for allwinner SoCs, one fixing the phy mode on a board,
the other one fixing a driver bug in the "RSB" bus driver. This was
originally targeted for 5.17, but seemed worth moving to 5.16
- Two small fixes for devicetree files on i.MX platforms, resolving
problems with ethernet and i2c"
* tag 'arm-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
optee: Suppress false positive kmemleak report in optee_handle_rpc()
tee: optee: Fix incorrect page free bug
arm64: dts: lx2160a: fix scl-gpios property name
tee: handle lookup of shm with reference count 0
ARM: dts: imx6qdl-wandboard: Fix Ethernet support
bus: sunxi-rsb: Fix shutdown
arm64: dts: allwinner: orangepi-zero-plus: fix PHY mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix memblock_phys_alloc() section mismatch error
There are section mismatch errors when compiler refuses to inline
one-line wrapper memblock_phys_alloc(). Make memblock_phys_alloc()
__always_inline to avoid these mismatch issues"
* tag 'fixes-2021-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix memblock_phys_alloc() section mismatch error
|
|
Fix modpost Section mismatch error in memblock_phys_alloc()
[...]
WARNING: modpost: vmlinux.o(.text.unlikely+0x1dcc): Section mismatch in reference
from the function memblock_phys_alloc() to the function .init.text:memblock_phys_alloc_range()
The function memblock_phys_alloc() references
the function __init memblock_phys_alloc_range().
This is often because memblock_phys_alloc lacks a __init
annotation or the annotation of memblock_phys_alloc_range is wrong.
ERROR: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
[...]
memblock_phys_alloc() is a one-line wrapper, make it __always_inline to
avoid these section mismatches.
Reported-by: k2ci <kernel-bot@kylinos.cn>
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
[rppt: slightly massaged changelog ]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20211217020754.2874872-1-liu.yun@linux.dev
|
|
When building with Clang and CONFIG_TRACE_BRANCH_PROFILING, there are a
lot of unreachable warnings, like:
arch/x86/kernel/traps.o: warning: objtool: handle_xfd_event()+0x134: unreachable instruction
Without an input to the inline asm, 'volatile' is ignored for some
reason and Clang feels free to move the reachable() annotation away from
its intended location.
Fix that by re-adding the counter value to the inputs.
Fixes: f1069a8756b9 ("compiler.h: Avoid using inline asm operand modifiers")
Fixes: c199f64ff93c ("instrumentation.h: Avoid using inline asm operand modifiers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/0417e96909b97a406323409210de7bf13df0b170.1636410380.git.jpoimboe@redhat.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: x86@kernel.org
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Miroslav Benes <mbenes@suse.cz>
|
|
This macro is defined by glibc itself, which makes the issue go unnoticed on
those systems. On non-glibc systems it causes build failures on several
utilities and libraries, like bpftool and objtool.
Fixes: 1d509f2a6ebc ("x86/insn: Support big endian cross-compiles")
Fixes: 2d7ce0e8a704 ("tools/virtio: more stubs")
Fixes: 3fb321fde22d ("selftests/net: ipv6 flowlabel")
Fixes: 50b3ed57dee9 ("selftests/bpf: test bpf flow dissection")
Fixes: 9cacf81f8161 ("bpf: Remove extra lock_sock for TCP_ZEROCOPY_RECEIVE")
Fixes: a4b2061242ec ("tools include uapi: Grab a copy of linux/in.h")
Fixes: b12d6ec09730 ("bpf: btf: add btf print functionality")
Fixes: c0dd967818a2 ("tools, include: Grab a copy of linux/erspan.h")
Fixes: c4b6014e8bb0 ("tools: Add copy of perf_event.h to tools/include/linux/")
Signed-off-by: Ismael Luceno <ismael@iodev.co.uk>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20211115134647.1921-1-ismael@iodev.co.uk
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
|
|
virtio_net_hdr_set_proto infers skb->protocol from the virtio_net_hdr
gso_type, to avoid packets getting dropped for lack of a proto type.
Its protocol choice is a guess, especially in the case of UFO, where
the single VIRTIO_NET_HDR_GSO_UDP label covers both UFOv4 and UFOv6.
Skip this best effort if the field is already initialized. Whether
explicitly from userspace, or implicitly based on an earlier call to
dev_parse_header_protocol (which is more robust, but was introduced
after this patch).
Fixes: 9d2f67e43b73 ("net/packet: fix packet drop as of virtio gso")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211220145027.2784293-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Skb with skb->protocol 0 at the time of virtio_net_hdr_to_skb may have
a protocol inferred from virtio_net_hdr with virtio_net_hdr_set_proto.
Unlike TCP, UDP does not have separate types for IPv4 and IPv6. Type
VIRTIO_NET_HDR_GSO_UDP is guessed to be IPv4/UDP. As of the below
commit, UFOv6 packets are dropped due to not matching the protocol as
obtained from dev_parse_header_protocol.
Invert the test to take that L2 protocol field as starting point and
pass both UFOv4 and UFOv6 for VIRTIO_NET_HDR_GSO_UDP.
Fixes: 924a9bc362a5 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct")
Link: https://lore.kernel.org/netdev/CABcq3pG9GRCYqFDBAJ48H1vpnnX=41u+MhQnayF1ztLH4WX0Fw@mail.gmail.com/
Reported-by: Andrew Melnichenko <andrew@daynix.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211220144901.2784030-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|