| Age | Commit message (Collapse) | Author |
|---|
|
Add interconnect device bindings. These devices can be used
to describe any RPMh and NoC based interconnect devices.
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241204-sm8750_master_interconnects-v3-1-3d9aad4200e9@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Groups can be killed during a reset even though they did nothing wrong.
That usually happens when the FW is put in a bad state by other groups,
resulting in group suspension failures when the reset happens.
If we end up in that situation, flag the group innocent and report
innocence through a new DRM_PANTHOR_GROUP_STATE flag.
Bump the minor driver version to reflect the uAPI change.
Changes in v4:
- Add an entry to the driver version changelog
- Add R-bs
Changes in v3:
- Actually report innocence to userspace
Changes in v2:
- New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211080500.2349505-1-boris.brezillon@collabora.com
|
|
The new pid inode number allocation scheme is neat but I overlooked a
possible, even though unlikely, attack that can be used to trigger an
overflow on both 32bit and 64bit.
An unique 64 bit identifier was constructed for each struct pid by two
combining a 32 bit idr with a 32 bit generation number. A 32bit number
was allocated using the idr_alloc_cyclic() infrastructure. When the idr
wrapped around a 32 bit wraparound counter was incremented. The 32 bit
wraparound counter served as the upper 32 bits and the allocated idr
number as the lower 32 bits.
Since the idr can only allocate up to INT_MAX entries everytime a
wraparound happens INT_MAX - 1 entries are lost (Ignoring that numbering
always starts at 2 to avoid theoretical collisions with the root inode
number.).
If userspace fully populates the idr such that and puts itself into
control of two entries such that one entry is somewhere in the middle
and the other entry is the INT_MAX entry then it is possible to overflow
the wraparound counter. That is probably difficult to pull off but the
mere possibility is annoying.
The problem could be contained to 32 bit by switching to a data
structure such as the maple tree that allows allocating 64 bit numbers
on 64 bit machines. That would leave 32 bit in a lurch but that probably
doesn't matter that much. The other problem is that removing entries
form the maple tree is somewhat non-trivial because the removal code can
be called under the irq write lock of tasklist_lock and
irq{save,restore} code.
Instead, allocate unique identifiers for struct pid by simply
incrementing a 64 bit counter and insert each struct pid into the rbtree
so it can be looked up to decode file handles avoiding to leak actual
pids across pid namespaces in file handles.
On both 64 bit and 32 bit the same 64 bit identifier is used to lookup
struct pid in the rbtree. On 64 bit the unique identifier for struct pid
simply becomes the inode number. Comparing two pidfds continues to be as
simple as comparing inode numbers.
On 32 bit the 64 bit number assigned to struct pid is split into two 32
bit numbers. The lower 32 bits are used as the inode number and the
upper 32 bits are used as the inode generation number. Whenever a
wraparound happens on 32 bit the 64 bit number will be incremented by 2
so inode numbering starts at 2 again.
When a wraparound happens on 32 bit multiple pidfds with the same inode
number are likely to exist. This isn't a problem since before pidfs
pidfds used the anonymous inode meaning all pidfds had the same inode
number. On 32 bit sserspace can thus reconstruct the 64 bit identifier
by retrieving both the inode number and the inode generation number to
compare, or use file handles. This gives the same guarantees on both 32
bit and 64 bit.
Link: https://lore.kernel.org/r/20241214-gekoppelt-erdarbeiten-a1f9a982a5a6@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This allows filesystems such as pidfs to provide their custom permission
checks.
Link: https://lore.kernel.org/r/20241129-work-pidfs-file_handle-v1-5-87d803a42495@kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add the `microchip,sama7d65-pmc` compatible string to the existing binding,
since the SAMA7D65 PMC shares the same properties and clock requirements
as the SAMA7G5.
Export MCK3 and MCK5 to be accessed and referenced in DT to assign to
the clocks property for sama7d65 SoC.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/5252a28531deaee67af1edd8e72d45ca57783464.1733505542.git.Ryan.Wanner@microchip.com
[claudiu.beznea: use tabs instead of spaces in
include/dt-bindings/clock/at91.h]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add new socket option, SO_RCVPRIORITY, to include SO_PRIORITY in the
ancillary data returned by recvmsg().
This is analogous to the existing support for SO_RCVMARK,
as implemented in commit 6fd1d51cfa253 ("net: SO_RCVMARK socket option
for SO_MARK with recvmsg()").
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-5-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Linux socket API currently allows setting SO_PRIORITY at the
socket level, applying a uniform priority to all packets sent through
that socket. The exception to this is IP_TOS, when the priority value
is calculated during the handling of
ancillary data, as implemented in commit f02db315b8d8 ("ipv4: IP_TOS
and IP_TTL can be specified as ancillary data").
However, this is a computed
value, and there is currently no mechanism to set a custom priority
via control messages prior to this patch.
According to this patch, if SO_PRIORITY is specified as ancillary data,
the packet is sent with the priority value set through
sockc->priority, overriding the socket-level values
set via the traditional setsockopt() method. This is analogous to
the existing support for SO_MARK, as implemented in
commit c6af0c227a22 ("ip: support SO_MARK cmsg").
If both cmsg SO_PRIORITY and IP_TOS are passed, then the one that
takes precedence is the last one in the cmsg list.
This patch has the side effect that raw_send_hdrinc now interprets cmsg
IP_TOS.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-3-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expose an "unblock after N reports" OA property, to allow userspace threads
to be woken up less frequently.
Co-developed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212224903.1853862-1-ashutosh.dixit@intel.com
|
|
Zbigniew mentioned at Linux Plumber's that systemd is interested in
switching to execveat() for service execution, but can't, because the
contents of /proc/pid/comm are the file descriptor which was used,
instead of the path to the binary[1]. This makes the output of tools like
top and ps useless, especially in a world where most fds are opened
CLOEXEC so the number is truly meaningless.
When the filename passed in is empty (e.g. with AT_EMPTY_PATH), use the
dentry's filename for "comm" instead of using the useless numeral from
the synthetic fdpath construction. This way the actual exec machinery
is unchanged, but cosmetically the comm looks reasonable to admins
investigating things.
Instead of adding TASK_COMM_LEN more bytes to bprm, use one of the unused
flag bits to indicate that we need to set "comm" from the dentry.
Suggested-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Suggested-by: Tycho Andersen <tandersen@netflix.com>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://github.com/uapi-group/kernel-features#set-comm-field-before-exec [1]
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Tested-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Using strscpy() meant that the final character in task->comm may be
non-NUL for a moment before the "string too long" truncation happens.
Instead of adding a new use of the ambiguous strncpy(), we'd want to
use memtostr_pad() which enforces being able to check at compile time
that sizes are sensible, but this requires being able to see string
buffer lengths. Instead of trying to inline __set_task_comm() (which
needs to call trace and perf functions), just open-code it. But to
make sure we're always safe, add compile-time checking like we already
do for get_task_comm().
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next 2024-12-16
The following pull-request contains mlx5 IFC updates.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add device cap abs_native_port_num
net/mlx5: qos: Add ifc support for cross-esw scheduling
net/mlx5: Add support for new scheduling elements
net/mlx5: Add ConnectX-8 device to ifc
net/mlx5: ifc: Reorganize mlx5_ifc_flow_table_context_bits
====================
Link: https://patch.msgid.link/20241216124028.973763-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC performs value range tracking for variables as a way to provide better
diagnostics. One place this is regularly seen is with warnings associated
with bounds-checking, e.g. -Wstringop-overflow, -Wstringop-overread,
-Warray-bounds, etc. In order to keep the signal-to-noise ratio high,
warnings aren't emitted when a value range spans the entire value range
representable by a given variable. For example:
unsigned int len;
char dst[8];
...
memcpy(dst, src, len);
If len's value is unknown, it has the full "unsigned int" range of [0,
UINT_MAX], and GCC's compile-time bounds checks against memcpy() will
be ignored. However, when a code path has been able to narrow the range:
if (len > 16)
return;
memcpy(dst, src, len);
Then the range will be updated for the execution path. Above, len is
now [0, 16] when reading memcpy(), so depending on other optimizations,
we might see a -Wstringop-overflow warning like:
error: '__builtin_memcpy' writing between 9 and 16 bytes into region of size 8 [-Werror=stringop-overflow]
When building with CONFIG_FORTIFY_SOURCE, the fortified run-time bounds
checking can appear to narrow value ranges of lengths for memcpy(),
depending on how the compiler constructs the execution paths during
optimization passes, due to the checks against the field sizes. For
example:
if (p_size_field != SIZE_MAX &&
p_size != p_size_field && p_size_field < size)
As intentionally designed, these checks only affect the kernel warnings
emitted at run-time and do not block the potentially overflowing memcpy(),
so GCC thinks it needs to produce a warning about the resulting value
range that might be reaching the memcpy().
We have seen this manifest a few times now, with the most recent being
with cpumasks:
In function ‘bitmap_copy’,
inlined from ‘cpumask_copy’ at ./include/linux/cpumask.h:839:2,
inlined from ‘__padata_set_cpumasks’ at kernel/padata.c:730:2:
./include/linux/fortify-string.h:114:33: error: ‘__builtin_memcpy’ reading between 257 and 536870904 bytes from a region of size 256 [-Werror=stringop-overread]
114 | #define __underlying_memcpy __builtin_memcpy
| ^
./include/linux/fortify-string.h:633:9: note: in expansion of macro ‘__underlying_memcpy’
633 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
./include/linux/fortify-string.h:678:26: note: in expansion of macro ‘__fortify_memcpy_chk’
678 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
./include/linux/bitmap.h:259:17: note: in expansion of macro ‘memcpy’
259 | memcpy(dst, src, len);
| ^~~~~~
kernel/padata.c: In function ‘__padata_set_cpumasks’:
kernel/padata.c:713:48: note: source object ‘pcpumask’ of size [0, 256]
713 | cpumask_var_t pcpumask,
| ~~~~~~~~~~~~~~^~~~~~~~
This warning is _not_ emitted when CONFIG_FORTIFY_SOURCE is disabled,
and with the recent -fdiagnostics-details we can confirm the origin of
the warning is due to FORTIFY's bounds checking:
../include/linux/bitmap.h:259:17: note: in expansion of macro 'memcpy'
259 | memcpy(dst, src, len);
| ^~~~~~
'__padata_set_cpumasks': events 1-2
../include/linux/fortify-string.h:613:36:
612 | if (p_size_field != SIZE_MAX &&
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
613 | p_size != p_size_field && p_size_field < size)
| ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
| |
| (1) when the condition is evaluated to false
| (2) when the condition is evaluated to true
'__padata_set_cpumasks': event 3
114 | #define __underlying_memcpy __builtin_memcpy
| ^
| |
| (3) out of array bounds here
Note that the cpumask warning started appearing since bitmap functions
were recently marked __always_inline in commit ed8cd2b3bd9f ("bitmap:
Switch from inline to __always_inline"), which allowed GCC to gain
visibility into the variables as they passed through the FORTIFY
implementation.
In order to silence these false positives but keep otherwise deterministic
compile-time warnings intact, hide the length variable from GCC with
OPTIMIZE_HIDE_VAR() before calling the builtin memcpy.
Additionally add a comment about why all the macro args have copies with
const storage.
Reported-by: "Thomas Weißschuh" <linux@weissschuh.net>
Closes: https://lore.kernel.org/all/db7190c8-d17f-4a0d-bc2f-5903c79f36c2@t-8ch.de/
Reported-by: Nilay Shroff <nilay@linux.ibm.com>
Closes: https://lore.kernel.org/all/20241112124127.1666300-1-nilay@linux.ibm.com/
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Explicitly check that there is at least online vCPU before iterating over
all vCPUs. Because the max index is an unsigned long, passing "0 - 1" in
the online_vcpus==0 case results in xa_for_each_range() using an unlimited
max, i.e. allows it to access vCPU0 when it shouldn't. This will allow
KVM to safely _erase_ from vcpu_array if the last stages of vCPU creation
fail, i.e. without generating a use-after-free if a different task happens
to be concurrently iterating over all vCPUs.
Note, because xa_for_each_range() is a macro, kvm_for_each_vcpu() subtly
reloads online_vcpus after each iteration, i.e. adding an extra load
doesn't meaningfully impact the total cost of iterating over all vCPUs.
And because online_vcpus is never decremented, there is no risk of a
reload triggering a walk of the entire xarray.
Cc: Will Deacon <will@kernel.org>
Cc: Michal Luczaj <mhal@rbox.co>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241009150455.1057573-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Explicitly verify the target vCPU is fully online _prior_ to clamping the
index in kvm_get_vcpu(). If the index is "bad", the nospec clamping will
generate '0', i.e. KVM will return vCPU0 instead of NULL.
In practice, the bug is unlikely to cause problems, as it will only come
into play if userspace or the guest is buggy or misbehaving, e.g. KVM may
send interrupts to vCPU0 instead of dropping them on the floor.
However, returning vCPU0 when it shouldn't exist per online_vcpus is
problematic now that KVM uses an xarray for the vCPUs array, as KVM needs
to insert into the xarray before publishing the vCPU to userspace (see
commit c5b077549136 ("KVM: Convert the kvm->vcpus array to a xarray")),
i.e. before vCPU creation is guaranteed to succeed.
As a result, incorrectly providing access to vCPU0 will trigger a
use-after-free if vCPU0 is dereferenced and kvm_vm_ioctl_create_vcpu()
bails out of vCPU creation due to an error and frees vCPU0. Commit
afb2acb2e3a3 ("KVM: Fix vcpu_array[0] races") papered over that issue, but
in doing so introduced an unsolvable teardown conundrum. Preventing
accesses to vCPU0 before it's fully online will allow reverting commit
afb2acb2e3a3, without re-introducing the vcpu_array[0] UAF race.
Fixes: 1d487e9bf8ba ("KVM: fix spectrev1 gadgets")
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241009150455.1057573-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add SET_STATE ioctl to configure device power mode for aie2 device.
Three modes are supported initially.
POWER_MODE_DEFAULT: Enable clock gating and set DPM (Dynamic Power
Management) level to value which has been set by resource solver or
maximum DPM level the device supports.
POWER_MODE_HIGH: Enable clock gating and set DPM level to maximum DPM
level the device supports.
POWER_MODE_TURBO: Disable clock gating and set DPM level to maximum DPM
level the device supports.
Disabling clock gating means all clocks always run on full speed. And
the different clock frequency are used based on DPM level been set.
Initially, the driver set the power mode to default mode.
Co-developed-by: Narendra Gutta <VenkataNarendraKumar.Gutta@amd.com>
Signed-off-by: Narendra Gutta <VenkataNarendraKumar.Gutta@amd.com>
Co-developed-by: George Yang <George.Yang@amd.com>
Signed-off-by: George Yang <George.Yang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213232933.1545388-4-lizhi.hou@amd.com
|
|
The macros giving the direction of the crossing thresholds use the BIT
macro which is not exported to the userspace. Consequently when an
userspace program includes the header, it fails to compile.
Replace the macros by their litteral to allow the compilation of
userspace program using this header.
Fixes: 445936f9e258 ("thermal: core: Add user thresholds support")
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20241212201311.4143196-1-daniel.lezcano@linaro.org
[ rjw: Add Fixes: ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Three small fixes for the soc tree:
- devicetee fix for the Arm Juno reference machine, to allow more
interesting PCI configurations
- build fix for SCMI firmware on the NXP i.MX platform
- fix for a race condition in Arm FF-A firmware"
* tag 'soc-fixes-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: fvp: Update PCIe bus-range property
firmware: arm_ffa: Fix the race around setting ffa_dev->properties
firmware: arm_scmi: Fix i.MX build dependency
|
|
The corresponding driver was removed two years ago but the platform data
header was left behind. Remove it now.
Fixes: 3c9cb34939fb ("input: remove davinci keyboard driver")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241216083218.22926-1-brgl@bgdev.pl
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Cross-merge bpf fixes after downstream PR.
No conflicts.
Adjacent changes in:
Auto-merging include/linux/bpf.h
Auto-merging include/linux/bpf_verifier.h
Auto-merging kernel/bpf/btf.c
Auto-merging kernel/bpf/verifier.c
Auto-merging kernel/trace/bpf_trace.c
Auto-merging tools/testing/selftests/bpf/progs/test_tp_btf_nullable.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
All folios that f2fs sees belong to f2fs and not to the swapcache
so it can dereference folio->mapping directly like all other
filesystems do.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Remove accesses to page->index and page->mapping as well as
unnecessary calls to page_file_mapping().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The connector->eld is accessed by the .get_eld() callback. This access
can collide with the drm_edid_to_eld() updating the data at the same
time. Add drm_connector.eld_mutex to protect the data from concurrenct
access. Individual drivers are not updated (to reduce possible issues
while applying the patch), maintainers are to find a best suitable way
to lock that mutex while accessing the ELD data.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-1-c9bce1ee8bea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce support for ETHTOOL_MSG_TSCONFIG_GET/SET ethtool netlink socket
to read and configure hwtstamp configuration of a PHC provider. Note that
simultaneous hwtstamp isn't supported; configuring a new one disables the
previous setting.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Either the MAC or the PHY can provide hwtstamp, so we should be able to
read the tsinfo for any hwtstamp provider.
Enhance 'get' command to retrieve tsinfo of hwtstamp providers within a
network topology.
Add support for a specific dump command to retrieve all hwtstamp
providers within the network topology, with added functionality for
filtered dump to target a single interface.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce the description of a hwtstamp provider, mainly defined with a
the hwtstamp source and the phydev pointer.
Add a hwtstamp provider description within the netdev structure to
allow saving the hwtstamp we want to use. This prepares for future
support of an ethtool netlink command to select the desired hwtstamp
provider. By default, the old API that does not support hwtstamp
selectability is used, meaning the hwtstamp provider pointer is unset.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This introduces 5 counters to keep track of key updates:
Tls{Rx,Tx}Rekey{Ok,Error} and TlsRxRekeyReceived.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a TLS handshake record carrying a KeyUpdate message is received,
all subsequent records will be encrypted with a new key. We need to
stop decrypting incoming records with the old key, and wait until
userspace provides a new key.
Make a note of this in the RX context just after decrypting that
record, and stop recvmsg/splice calls with EKEYEXPIRED until the new
key is available.
key_update_pending can't be combined with the existing bitfield,
because we will read it locklessly in ->poll.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the abs_native_port_num is set, the native_port_num reported
by the device may not be continuous and bigger than the num_lag_ports.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241212221329.961628-2-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add a new audit message type to capture nlmsg-related information. This
is similar to LSM_AUDIT_DATA_IOCTL_OP which was added for the other
SELinux extended permission (ioctl).
Adding a new type is preferred to adding to the existing
lsm_network_audit structure which contains irrelevant information for
the netlink sockets (i.e., dport, sport).
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
[PM: change "nlnk-msgtype" to "nl-msgtype" as discussed]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Sundry build and misc fixes
* tag 'arc-6.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: build: Try to guess GCC variant of cross compiler
ARC: bpf: Correct conditional check in 'check_jmp_32'
ARC: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices
ARC: build: Use __force to suppress per-CPU cmpxchg warnings
ARC: fix reference of dependency for PAE40 config
ARC: build: disallow invalid PAE40 + 4K page config
arc: rename aux.h to arc_aux.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Prevent incorrect dequeueing of the deadline dlserver helper task and
fix its time accounting
- Properly track the CFS runqueue runnable stats
- Check the total number of all queued tasks in a sched fair's runqueue
hierarchy before deciding to stop the tick
- Fix the scheduling of the task that got woken last (NEXT_BUDDY) by
preventing those from being delayed
* tag 'sched_urgent_for_v6.13_rc3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/dlserver: Fix dlserver time accounting
sched/dlserver: Fix dlserver double enqueue
sched/eevdf: More PELT vs DELAYED_DEQUEUE
sched/fair: Fix sched_can_stop_tick() for fair tasks
sched/fair: Fix NEXT_BUDDY
|
|
This change introduces netlink notifications for multicast address
changes. The following features are included:
* Addition and deletion of multicast addresses are reported using
RTM_NEWMULTICAST and RTM_DELMULTICAST messages with AF_INET and
AF_INET6.
* Two new notification groups: RTNLGRP_IPV4_MCADDR and
RTNLGRP_IPV6_MCADDR are introduced for receiving these events.
This change allows user space applications (e.g., ip monitor) to
efficiently track multicast group memberships by listening for netlink
events. Previously, applications relied on inefficient polling of
procfs, introducing delays. With netlink notifications, applications
receive realtime updates on multicast group membership changes,
enabling more precise metrics collection and system monitoring.
This change also unlocks the potential for implementing a wide range
of sophisticated multicast related features in user space by allowing
applications to combine kernel provided multicast address information
with user space data and communicate decisions back to the kernel for
more fine grained control. This mechanism can be used for various
purposes, including multicast filtering, IGMP/MLD offload, and
IGMP/MLD snooping.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Co-developed-by: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Signed-off-by: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Link: https://lore.kernel.org/r/20180906091056.21109-1-pruddy@vyatta.att-mail.com
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Userspace wants to now about the used power supply extensions,
for example to handle a device extended by a certain extension
differently or to discover information about the extending device.
Add a sysfs directory to the power supply device.
This directory contains links which are named after the used extension
and point to the device implementing that extension.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241211-power-supply-extensions-v6-4-9d9dc3f3d387@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Pull bpf fixes from Daniel Borkmann:
- Fix a bug in the BPF verifier to track changes to packet data
property for global functions (Eduard Zingerman)
- Fix a theoretical BPF prog_array use-after-free in RCU handling of
__uprobe_perf_func (Jann Horn)
- Fix BPF tracing to have an explicit list of tracepoints and their
arguments which need to be annotated as PTR_MAYBE_NULL (Kumar
Kartikeya Dwivedi)
- Fix a logic bug in the bpf_remove_insns code where a potential error
would have been wrongly propagated (Anton Protopopov)
- Avoid deadlock scenarios caused by nested kprobe and fentry BPF
programs (Priya Bala Govindasamy)
- Fix a bug in BPF verifier which was missing a size check for
BTF-based context access (Kumar Kartikeya Dwivedi)
- Fix a crash found by syzbot through an invalid BPF prog_array access
in perf_event_detach_bpf_prog (Jiri Olsa)
- Fix several BPF sockmap bugs including a race causing a refcount
imbalance upon element replace (Michal Luczaj)
- Fix a use-after-free from mismatching BPF program/attachment RCU
flavors (Jann Horn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (23 commits)
bpf: Avoid deadlock caused by nested kprobe and fentry bpf programs
selftests/bpf: Add tests for raw_tp NULL args
bpf: Augment raw_tp arguments with PTR_MAYBE_NULL
bpf: Revert "bpf: Mark raw_tp arguments with PTR_MAYBE_NULL"
selftests/bpf: Add test for narrow ctx load for pointer args
bpf: Check size for BTF-based ctx access of pointer members
selftests/bpf: extend changes_pkt_data with cases w/o subprograms
bpf: fix null dereference when computing changes_pkt_data of prog w/o subprogs
bpf: Fix theoretical prog_array UAF in __uprobe_perf_func()
bpf: fix potential error return
selftests/bpf: validate that tail call invalidates packet pointers
bpf: consider that tail calls invalidate packet pointers
selftests/bpf: freplace tests for tracking of changes_packet_data
bpf: check changes_pkt_data property for extension programs
selftests/bpf: test for changing packet data from global functions
bpf: track changes_pkt_data property for global functions
bpf: refactor bpf_helper_changes_pkt_data to use helper number
bpf: add find_containing_subprog() utility function
bpf,perf: Fix invalid prog_array access in perf_event_detach_bpf_prog
bpf: Fix UAF via mismatching bpf_prog/attachment RCU flavors
...
|
|
'srcu.2024.12.14a' and 'torture-test.2024.12.14a' into rcu-merge.2024.12.14a
fixes.2024.12.14a: RCU fixes
rcutorture.2024.12.14a: Torture-test updates
srcu.2024.12.14a: SRCU updates
torture-test.2024.12.14a: Adding an extra test, fixes
|
|
This commit fixes a typo in which a comment needed to have been updated
from srcu_check_read_flavor() to __srcu_check_read_flavor().
Reported-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Closes: https://lore.kernel.org/all/b75d1fcd-6fcd-4619-bb5c-507fa599ee28@amd.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
For almost 20 years, the int return value from srcu_read_lock() has
been always either zero or one. This commit therefore documents the
fact that it will be non-negative, and does the same for the underlying
__srcu_read_lock().
[ paulmck: Apply Andrii Nakryiko feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
This commit converts rcutorture.c values for the reader_flavor module
parameter from hexadecimal to the SRCU_READ_FLAVOR_* C-preprocessor
macros. The actual modprobe or kernel-boot-parameter values for
read_flavor must still be entered in hexadecimal.
Link: https://lore.kernel.org/all/c48c9dca-fe07-4833-acaa-28c827e5a79e@amd.com/
Suggested-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
This commit checks to see if the RCU reader has been preempted within
its read-side critical section for RCU flavors supporting this notion
(currently only preemptible RCU). If such a preemption occurred, then
this is printed at the end of the "Failure/close-call rcutorture reader
segments" list at the end of the rcutorture run.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
Writing PMBus protected registers does succeed from the smbus perspective,
even if the write is ignored by the device and a communication fault is
raised. This fault will silently be caught and cleared by pmbus irq if one
has been registered.
This means that the regulator call may return succeed although the
operation was ignored.
With this change, the operation which are not supported will be properly
flagged as such and the regulator framework won't even try to execute them.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[groeck: Adjust to EXPORT_SYMBOL_NS_GPL API change]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
To simplify the !CONFIG_THERMAL case in the hwmon core,
add a !CONFIG_THERMAL stub for thermal_zone_device_update().
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Current use cases of torture_sched_setaffinity() are well served by its
unconditional warning on error. However, an upcoming use case for a
preemption kthread needs to avoid warnings that might otherwise arise
when that kthread attempted to bind itself to a CPU on its way offline.
This commit therefore adds a dowarn argument that, when false, suppresses
the warning.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
This allows filesystems such as pidfs to provide their custom open.
Link: https://lore.kernel.org/r/20241129-work-pidfs-file_handle-v1-3-87d803a42495@kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pseudo-filesystems might reasonably wish to implement the export ops
(particularly for name_to_handle_at/open_by_handle_at); plumb this
through pseudo_fs_context
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Erin Shepherd <erin.shepherd@e43.eu>
Link: https://lore.kernel.org/r/20241113-pidfs_fh-v2-1-9a4d28155a37@e43.eu
Link: https://lore.kernel.org/r/20241129-work-pidfs-file_handle-v1-1-87d803a42495@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Recently we received a patchset that aims to enable file handle encoding
and decoding via name_to_handle_at(2) and open_by_handle_at(2).
A crucical step in the patch series is how to go from inode number to
struct pid without leaking information into unprivileged contexts. The
issue is that in order to find a struct pid the pid number in the
initial pid namespace must be encoded into the file handle via
name_to_handle_at(2). This can be used by containers using a separate
pid namespace to learn what the pid number of a given process in the
initial pid namespace is. While this is a weak information leak it could
be used in various exploits and in general is an ugly wart in the design.
To solve this problem a new way is needed to lookup a struct pid based
on the inode number allocated for that struct pid. The other part is to
remove the custom inode number allocation on 32bit systems that is also
an ugly wart that should go away.
So, a new scheme is used that I was discusssing with Tejun some time
back. A cyclic ida is used for the lower 32 bits and a the high 32 bits
are used for the generation number. This gives a 64 bit inode number
that is unique on both 32 bit and 64 bit. The lower 32 bit number is
recycled slowly and can be used to lookup struct pids.
Link: https://lore.kernel.org/r/20241129-work-pidfs-v2-1-61043d66fbce@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
gpmc_get_client_irq() last use was removed by
commit ac28e47ccc3f ("ARM: OMAP2+: Remove legacy gpmc-nand.c")
gpmc_ticks_to_ns() last use was removed by
commit 2514830b8b8c ("ARM: OMAP2+: Remove gpmc-onenand")
Remove them.
gpmc_clk_ticks_to_ns() is now only used in some DEBUG
code; move inside the ifdef to avoid unused warnings.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20241211214227.107980-1-linux@treblig.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add dt-schema documentation for the Exynos990 SoC CMU.
This clock management unit has a topmost block (CMU_TOP)
that generates top clocks for other blocks. Currently the
only other block implemented is CMU_HSI0, which provides
clocks for the USB part of the SoC.
Also, device-tree binding definitions added for these blocks:
- CMU_TOP
- CMU_HSI0
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Link: https://lore.kernel.org/r/20241209-exynos990-cmu-v4-1-57f07080f9e4@mentallysanemainliners.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Since the physical address support in skcipher_walk is not used anymore,
remove all the code associated with it. This includes:
- The skcipher_walk_async() and skcipher_walk_complete() functions;
- The SKCIPHER_WALK_PHYS flag and everything conditional on it;
- The buffers, phys, and virt.page fields in struct skcipher_walk;
- struct skcipher_walk_buffer.
As a result, skcipher_walk now just supports virtual addresses.
Physical address support in skcipher_walk is unneeded because drivers
that need physical addresses just use the scatterlists directly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
