summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2023-10-12Merge tag 'drm-fixes-2023-10-13' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly fixes, the core is msm and amdgpu with some scattered fixes across vmwgfx, panel and the core stuff. atomic-helper: - Relax checks for unregistered connectors dma-buf: - Work around race condition when retrieving fence timestamp gem: - Avoid OOB access in BO memory range panel: - boe-tv101wun-ml6: Fix flickering simpledrm: - Fix error output vwmgfx: - Fix size calculation in texture-state code - Ref GEM BOs in surfaces msm: - PHY/link training reset fix - msm8998 - correct highest bank bit - skip video mode if timing engine disabled - check irq_of_parse_and_map return code - add new lines to some prints - fail atomic check for max mdp clk test amdgpu: - Seamless boot fix - Fix TTM BO resource check - SI fix for doorbell handling" * tag 'drm-fixes-2023-10-13' of git://anongit.freedesktop.org/drm/drm: drm/tiny: correctly print `struct resource *` on error drm: Do not overrun array in drm_gem_get_pages() drm/atomic-helper: relax unregistered connector check drm/panel: boe-tv101wum-nl6: Completely pull GPW to VGL before TP term drm/amdgpu: fix SI failure due to doorbells allocation drm/amdgpu: add missing NULL check drm/amd/display: Don't set dpms_off for seamless boot drm/vmwgfx: Keep a gem reference to user bos in surfaces drm/vmwgfx: fix typo of sizeof argument drm/msm/dpu: fail dpu_plane_atomic_check() based on mdp clk limits dma-buf: add dma_fence_timestamp helper drm/msm/dp: Add newlines to debug printks drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow drm/msm/dsi: fix irq_of_parse_and_map() error checking drm/msm/dsi: skip the wait for video mode done if not applicable drm/msm/mdss: fix highest-bank-bit for msm8998 drm/msm/dp: do not reinitialize phy unless retry during link training
2023-10-13Merge tag 'drm-misc-fixes-2023-10-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * atomic-helper: Relax checks for unregistered connectors * dma-buf: Work around race condition when retrieving fence timestamp * gem: Avoid OOB access in BO memory range * panel: * boe-tv101wun-ml6: Fix flickering * simpledrm: Fix error output * vwmgfx: * Fix size calculation in texture-state code * Ref GEM BOs in surfaces Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231012111638.GA25037@linux-uq9g
2023-10-12Merge tag 'cgroup-for-6.6-rc5-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: - In cgroup1, the `tasks` file could have duplicate pids which can trigger a warning in seq_file. Fix it by removing duplicate items after sorting - Comment update * tag 'cgroup-for-6.6-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Fix incorrect css_set_rwsem reference in comment cgroup: Remove duplicates in cgroup v1 tasks file
2023-10-12Merge tag 'net-6.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from CAN and BPF. We have a regression in TC currently under investigation, otherwise the things that stand off most are probably the TCP and AF_PACKET fixes, with both issues coming from 6.5. Previous releases - regressions: - af_packet: fix fortified memcpy() without flex array. - tcp: fix crashes trying to free half-baked MTU probes - xdp: fix zero-size allocation warning in xskq_create() - can: sja1000: always restart the tx queue after an overrun - eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp - eth: nfp: avoid rmmod nfp crash issues - eth: octeontx2-pf: fix page pool frag allocation warning Previous releases - always broken: - mctp: perform route lookups under a RCU read-side lock - bpf: s390: fix clobbering the caller's backchain in the trampoline - phy: lynx-28g: cancel the CDR check work item on the remove path - dsa: qca8k: fix qca8k driver for Turris 1.x - eth: ravb: fix use-after-free issue in ravb_tx_timeout_work() - eth: ixgbe: fix crash with empty VF macvlan list" * tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits) rswitch: Fix imbalance phy_power_off() calling rswitch: Fix renesas_eth_sw_remove() implementation octeontx2-pf: Fix page pool frag allocation warning nfc: nci: assert requested protocol is valid af_packet: Fix fortified memcpy() without flex array. net: tcp: fix crashes trying to free half-baked MTU probes net/smc: Fix pos miscalculation in statistics nfp: flower: avoid rmmod nfp crash issues net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read ethtool: Fix mod state of verbose no_mask bitset net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn() mctp: perform route lookups under a RCU read-side lock net: skbuff: fix kernel-doc typos s390/bpf: Fix unwinding past the trampoline s390/bpf: Fix clobbering the caller's backchain in the trampoline net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp net/smc: Fix dependency of SMC on ISM ixgbe: fix crash with empty VF macvlan list net/mlx5e: macsec: use update_pn flag instead of PN comparation net: phy: mscc: macsec: reject PN update requests ...
2023-10-12cgroup: Fix incorrect css_set_rwsem reference in commentWaiman Long
Since commit f0d9a5f17575 ("cgroup: make css_set_rwsem a spinlock and rename it to css_set_lock"), css_set_rwsem has been replaced by css_set_lock. That commit, however, missed the css_set_rwsem reference in include/linux/cgroup-defs.h. Fix that by changing it to css_set_lock as well. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2023-10-12af_packet: Fix fortified memcpy() without flex array.Kuniyuki Iwashima
Sergei Trofimovich reported a regression [0] caused by commit a0ade8404c3b ("af_packet: Fix warning of fortified memcpy() in packet_getname()."). It introduced a flex array sll_addr_flex in struct sockaddr_ll as a union-ed member with sll_addr to work around the fortified memcpy() check. However, a userspace program uses a struct that has struct sockaddr_ll in the middle, where a flex array is illegal to exist. include/linux/if_packet.h:24:17: error: flexible array member 'sockaddr_ll::<unnamed union>::<unnamed struct>::sll_addr_flex' not at end of 'struct packet_info_t' 24 | __DECLARE_FLEX_ARRAY(unsigned char, sll_addr_flex); | ^~~~~~~~~~~~~~~~~~~~ To fix the regression, let's go back to the first attempt [1] telling memcpy() the actual size of the array. Reported-by: Sergei Trofimovich <slyich@gmail.com> Closes: https://github.com/NixOS/nixpkgs/pull/252587#issuecomment-1741733002 [0] Link: https://lore.kernel.org/netdev/20230720004410.87588-3-kuniyu@amazon.com/ [1] Fixes: a0ade8404c3b ("af_packet: Fix warning of fortified memcpy() in packet_getname().") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20231009153151.75688-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-11Merge tag 'fs_for_v6.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota regression fix from Jan Kara. * tag 'fs_for_v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Fix slow quotaoff
2023-10-10net: skbuff: fix kernel-doc typosRandy Dunlap
Correct punctuation and drop an extraneous word. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231008214121.25940-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-10Merge tag 'hyperv-fixes-signed-20231009' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - fixes for Hyper-V VTL code (Saurabh Sengar and Olaf Hering) - fix hv_kvp_daemon to support keyfile based connection profile (Shradha Gupta) * tag 'hyperv-fixes-signed-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hv/hv_kvp_daemon:Support for keyfile based connection profile hyperv: reduce size of ms_hyperv_info x86/hyperv: Add common print prefix "Hyper-V" in hv_init x86/hyperv: Remove hv_vtl_early_init initcall x86/hyperv: Restrict get_vtl to only VTL platforms
2023-10-10Merge tag 'sound-6.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of pending fixes since a couple of weeks ago, which became slightly bigger than usual due to my vacation. Most of changes are about ASoC device-specific fixes while USB- and HD-audio received quirks as usual. All fixes, including two ASoC core changes, are reasonably small and safe to apply" * tag 'sound-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ALSA: usb-audio: Fix microphone sound on Nexigo webcam. ALSA: hda/realtek: Change model for Intel RVP board ALSA: usb-audio: Fix microphone sound on Opencomm2 Headset ALSA: hda: cs35l41: Cleanup and fix double free in firmware request ASoC: dt-bindings: fsl,micfil: Document #sound-dai-cells ASoC: amd: yc: Fix non-functional mic on Lenovo 82YM ASoC: tlv320adc3xxx: BUG: Correct micbias setting ASoC: rt5682: Fix regulator enable/disable sequence ASoC: hdmi-codec: Fix broken channel map reporting ASoC: core: Do not call link_exit() on uninitialized rtd objects ASoC: core: Print component name when printing log ASoC: SOF: amd: fix for firmware reload failure after playback ASoC: fsl-asoc-card: use integer type for fll_id and pll_id ASoC: fsl_sai: Don't disable bitclock for i.MX8MP dt-bindings: ASoC: rockchip: Add compatible for RK3128 spdif ASoC: soc-generic-dmaengine-pcm: Fix function name in comment ALSA: hda/realtek - ALC287 merge RTK codec with CS CS35L41 AMP ASoC: simple-card: fixup asoc_simple_probe() error handling ASoC: simple-card-utils: fixup simple_util_startup() error handling ASoC: Intel: sof_sdw: add support for SKU 0B14 ...
2023-10-10net: macsec: indicate next pn update when offloadingRadu Pirea (NXP OSS)
Indicate next PN update using update_pn flag in macsec_context. Offloaded MACsec implementations does not know whether or not the MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume that next PN should always updated, but this is not always true. The PN can be reset to its initial value using the following command: $ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case Or, the update PN command will succeed even if the driver does not support PN updates. $ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case Comparing the initial PN with the new PN value is not a solution. When the user updates the PN using its initial value the command will succeed, even if the driver does not support it. Like this: $ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \ ead3664f508eb06c40ac7104cdae4ce5 $ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-06Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "A typo fix for a PMU driver, a workround for a side-channel erratum on Cortex-A520 and a fix for the local timer save/restore when using ACPI with Qualcomm's custom CPUs: - Workaround for Cortex-A520 erratum #2966298 - Fix typo in Arm CMN PMU driver that breaks counter overflow handling - Fix timer handling across idle for Qualcomm custom CPUs" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: cpuidle, ACPI: Evaluate LPI arch_flags for broadcast timer arm64: errata: Add Cortex-A520 speculative unprivileged load workaround arm64: Add Cortex-A520 CPU part definition perf/arm-cmn: Fix the unhandled overflow status of counter 4 to 7
2023-10-06Merge tag 'drm-fixes-2023-10-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Regular weekly pull, all seems pretty normal, i915 and amdgpu mostly. There is one small new uAPI addition for nouveau but getting it in now avoids a bunch of userspace dances, and it's for a userspace that hasn't yet released, so should have no side effects. i915: - Fix for OpenGL CTS regression on Compute Shaders - Fix for default engines initialization - Fix TLB invalidation for Multi-GT devices amdgpu: - Add missing unique_id for GC 11.0.3 - Fix memory leak in FRU error path - Fix PCIe link reporting on some SMU 11 parts - Fix ACPI _PR3 detection - Fix DISPCLK WDIVIDER handling in OTG code tests: - Fix kunit release panel: - panel-orientation: Add quirk for One Mix 25 nouveau: - Report IB limit via getparams - Replace some magic numbers with constants - small clean up" * tag 'drm-fixes-2023-10-06' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: apply edge-case DISPCLK WDIVIDER changes to master OTG pipes only drm/amd: Fix detection of _PR3 on the PCIe root port drm/amd: Fix logic error in sienna_cichlid_update_pcie_parameters() drm/amdgpu: Fix a memory leak drm/amd/pm: add unique_id for gc 11.0.3 drm/i915: Invalidate the TLBs on each GT drm/i915: Register engines early to avoid type confusion drm/i915: Don't set PIPE_CONTROL_FLUSH_L3 for aux inval drm/nouveau: exec: report max pushs through getparam drm/nouveau: chan: use channel class definitions drm/nouveau: chan: use struct nvif_mclass drm: panel-orientation-quirks: Add quirk for One Mix 2S drm/tests: Fix kunit_release_action ctx argument
2023-10-06quota: Fix slow quotaoffJan Kara
Eric has reported that commit dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide") heavily increases runtime of generic/270 xfstest for ext4 in nojournal mode. The reason for this is that ext4 in nojournal mode leaves dquots dirty until the last dqput() and thus the cleanup done in quota_release_workfn() has to write them all. Due to the way quota_release_workfn() is written this results in synchronize_srcu() call for each dirty dquot which makes the dquot cleanup when turning quotas off extremely slow. To be able to avoid synchronize_srcu() for each dirty dquot we need to rework how we track dquots to be cleaned up. Instead of keeping the last dquot reference while it is on releasing_dquots list, we drop it right away and mark the dquot with new DQ_RELEASING_B bit instead. This way we can we can remove dquot from releasing_dquots list when new reference to it is acquired and thus there's no need to call synchronize_srcu() each time we drop dq_list_lock. References: https://lore.kernel.org/all/ZRytn6CxFK2oECUt@debian-BULLSEYE-live-builder-AMD64 Reported-by: Eric Whitney <enwlinux@gmail.com> Fixes: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide") CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
2023-10-06Merge tag 'drm-misc-fixes-2023-10-05' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * test: Fix kunit release * panel-orientation: Add quirk for One Mix 25 * nouveau: * Report IB limit via getparams * Replace some magic numbers with constants * Clean up Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231005092632.GA17332@linux-uq9g
2023-10-05Merge tag 'net-6.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from Bluetooth, netfilter, BPF and WiFi. I didn't collect precise data but feels like we've got a lot of 6.5 fixes here. WiFi fixes are most user-awaited. Current release - regressions: - Bluetooth: fix hci_link_tx_to RCU lock usage Current release - new code bugs: - bpf: mprog: fix maximum program check on mprog attachment - eth: ti: icssg-prueth: fix signedness bug in prueth_init_tx_chns() Previous releases - regressions: - ipv6: tcp: add a missing nf_reset_ct() in 3WHS handling - vringh: don't use vringh_kiov_advance() in vringh_iov_xfer(), it doesn't handle zero length like we expected - wifi: - cfg80211: fix cqm_config access race, fix crashes with brcmfmac - iwlwifi: mvm: handle PS changes in vif_cfg_changed - mac80211: fix mesh id corruption on 32 bit systems - mt76: mt76x02: fix MT76x0 external LNA gain handling - Bluetooth: fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER - l2tp: fix handling of transhdrlen in __ip{,6}_append_data() - dsa: mv88e6xxx: avoid EEPROM timeout when EEPROM is absent - eth: stmmac: fix the incorrect parameter after refactoring Previous releases - always broken: - net: replace calls to sock->ops->connect() with kernel_connect(), prevent address rewrite in kernel_bind(); otherwise BPF hooks may modify arguments, unexpectedly to the caller - tcp: fix delayed ACKs when reads and writes align with MSS - bpf: - verifier: unconditionally reset backtrack_state masks on global func exit - s390: let arch_prepare_bpf_trampoline return program size, fix struct_ops offsets - sockmap: fix accounting of available bytes in presence of PEEKs - sockmap: reject sk_msg egress redirects to non-TCP sockets - ipv4/fib: send netlink notify when delete source address routes - ethtool: plca: fix width of reads when parsing netlink commands - netfilter: nft_payload: rebuild vlan header on h_proto access - Bluetooth: hci_codec: fix leaking memory of local_codecs - eth: intel: ice: always add legacy 32byte RXDID in supported_rxdids - eth: stmmac: - dwmac-stm32: fix resume on STM32 MCU - remove buggy and unneeded stmmac_poll_controller, depend on NAPI - ibmveth: always recompute TCP pseudo-header checksum, fix use of the driver with Open vSwitch - wifi: - rtw88: rtw8723d: fix MAC address offset in EEPROM - mt76: fix lock dependency problem for wed_lock - mwifiex: sanity check data reported by the device - iwlwifi: ensure ack flag is properly cleared - iwlwifi: mvm: fix a memory corruption due to bad pointer arithm - iwlwifi: mvm: fix incorrect usage of scan API Misc: - wifi: mac80211: work around Cisco AP 9115 VHT MPDU length" * tag 'net-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits) MAINTAINERS: update Matthieu's email address mptcp: userspace pm allow creating id 0 subflow mptcp: fix delegated action races net: stmmac: remove unneeded stmmac_poll_controller net: lan743x: also select PHYLIB net: ethernet: mediatek: disable irq before schedule napi net: mana: Fix oversized sge0 for GSO packets net: mana: Fix the tso_bytes calculation net: mana: Fix TX CQE error handling netlink: annotate data-races around sk->sk_err sctp: update hb timer immediately after users change hb_interval sctp: update transport state when processing a dupcook packet tcp: fix delayed ACKs for MSS boundary condition tcp: fix quick-ack counting to count actual ACKs of new data page_pool: fix documentation typos tipc: fix a potential deadlock on &tx->lock net: stmmac: dwmac-stm32: fix resume on STM32 MCU ipv4: Set offload_failed flag in fibmatch results netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure netfilter: nf_tables: Deduplicate nft_register_obj audit logs ...
2023-10-05net: mana: Fix oversized sge0 for GSO packetsHaiyang Zhang
Handle the case when GSO SKB linear length is too large. MANA NIC requires GSO packets to put only the header part to SGE0, otherwise the TX queue may stop at the HW level. So, use 2 SGEs for the skb linear part which contains more than the packet header. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05dma-buf: add dma_fence_timestamp helperChristian König
When a fence signals there is a very small race window where the timestamp isn't updated yet. sync_file solves this by busy waiting for the timestamp to appear, but on other ocassions didn't handled this correctly. Provide a dma_fence_timestamp() helper function for this and use it in all appropriate cases. Another alternative would be to grab the spinlock when that happens. v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case the accurate timestamp is needed and/or the timestamp is not based on ktime (e.g. hw timestamp) v3 chk: drop the parameter again for unified handling Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 1774baa64f93 ("drm/scheduler: Change scheduled fence track v2") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com
2023-10-04tcp: fix quick-ack counting to count actual ACKs of new dataNeal Cardwell
This commit fixes quick-ack counting so that it only considers that a quick-ack has been provided if we are sending an ACK that newly acknowledges data. The code was erroneously using the number of data segments in outgoing skbs when deciding how many quick-ack credits to remove. This logic does not make sense, and could cause poor performance in request-response workloads, like RPC traffic, where requests or responses can be multi-segment skbs. When a TCP connection decides to send N quick-acks, that is to accelerate the cwnd growth of the congestion control module controlling the remote endpoint of the TCP connection. That quick-ack decision is purely about the incoming data and outgoing ACKs. It has nothing to do with the outgoing data or the size of outgoing data. And in particular, an ACK only serves the intended purpose of allowing the remote congestion control to grow the congestion window quickly if the ACK is ACKing or SACKing new data. The fix is simple: only count packets as serving the goal of the quickack mechanism if they are ACKing/SACKing new data. We can tell whether this is the case by checking inet_csk_ack_scheduled(), since we schedule an ACK exactly when we are ACKing/SACKing new data. Fixes: fc6415bcb0f5 ("[TCP]: Fix quick-ack decrementing with TSO.") Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20231001151239.1866845-1-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04Merge tag 'nf-23-10-04' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Florian Westphal says: ==================== netfilter patches for net First patch resolves a regression with vlan header matching, this was broken since 6.5 release. From myself. Second patch fixes an ancient problem with sctp connection tracking in case INIT_ACK packets are delayed. This comes with a selftest, both patches from Xin Long. Patch 4 extends the existing nftables audit selftest, from Phil Sutter. Patch 5, also from Phil, avoids a situation where nftables would emit an audit record twice. This was broken since 5.13 days. Patch 6, from myself, avoids spurious insertion failure if we encounter an overlapping but expired range during element insertion with the 'nft_set_rbtree' backend. This problem exists since 6.2. * tag 'nf-23-10-04' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure netfilter: nf_tables: Deduplicate nft_register_obj audit logs selftests: netfilter: Extend nft_audit.sh selftests: netfilter: test for sctp collision processing in nf_conntrack netfilter: handle the connecting collision properly in nf_conntrack_proto_sctp netfilter: nft_payload: rebuild vlan header on h_proto access ==================== Link: https://lore.kernel.org/r/20231004141405.28749-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04page_pool: fix documentation typosRandy Dunlap
Correct grammar for better readability. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/r/20231001003846.29541-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04Merge tag 'wireless-2023-09-27' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Quite a collection of fixes this time, really too many to list individually. Many stack fixes, even rfkill (found by simulation and the new eevdf scheduler)! Also a bigger maintainers file cleanup, to remove old and redundant information. * tag 'wireless-2023-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (32 commits) wifi: iwlwifi: mvm: Fix incorrect usage of scan API wifi: mac80211: Create resources for disabled links wifi: cfg80211: avoid leaking stack data into trace wifi: mac80211: allow transmitting EAPOL frames with tainted key wifi: mac80211: work around Cisco AP 9115 VHT MPDU length wifi: cfg80211: Fix 6GHz scan configuration wifi: mac80211: fix potential key leak wifi: mac80211: fix potential key use-after-free wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling wifi: brcmfmac: Replace 1-element arrays with flexible arrays wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet wifi: rtw88: rtw8723d: Fix MAC address offset in EEPROM rfkill: sync before userspace visibility/changes wifi: mac80211: fix mesh id corruption on 32 bit systems wifi: cfg80211: add missing kernel-doc for cqm_rssi_work wifi: cfg80211: fix cqm_config access race wifi: iwlwifi: mvm: Fix a memory corruption issue wifi: iwlwifi: Ensure ack flag is properly cleared. wifi: iwlwifi: dbg_ini: fix structure packing iwlwifi: mvm: handle PS changes in vif_cfg_changed ... ==================== Link: https://lore.kernel.org/r/20230927095835.25803-2-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04cpuidle, ACPI: Evaluate LPI arch_flags for broadcast timerOza Pawandeep
Arm® Functional Fixed Hardware Specification defines LPI states, which provide an architectural context loss flags field that can be used to describe the context that might be lost when an LPI state is entered. - Core context Lost - General purpose registers. - Floating point and SIMD registers. - System registers, include the System register based - generic timer for the core. - Debug register in the core power domain. - PMU registers in the core power domain. - Trace register in the core power domain. - Trace context loss - GICR - GICD Qualcomm's custom CPUs preserves the architectural state, including keeping the power domain for local timers active. when core is power gated, the local timers are sufficient to wake the core up without needing broadcast timer. The patch fixes the evaluation of cpuidle arch_flags, and moves only to broadcast timer if core context lost is defined in ACPI LPI. Fixes: a36a7fecfe60 ("ACPI / processor_idle: Add support for Low Power Idle(LPI) states") Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Oza Pawandeep <quic_poza@quicinc.com> Link: https://lore.kernel.org/r/20231003173333.2865323-1-quic_poza@quicinc.com Signed-off-by: Will Deacon <will@kernel.org>
2023-10-04Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-10-02 We've added 11 non-merge commits during the last 12 day(s) which contain a total of 12 files changed, 176 insertions(+), 41 deletions(-). The main changes are: 1) Fix BPF verifier to reset backtrack_state masks on global function exit as otherwise subsequent precision tracking would reuse them, from Andrii Nakryiko. 2) Several sockmap fixes for available bytes accounting, from John Fastabend. 3) Reject sk_msg egress redirects to non-TCP sockets given this is only supported for TCP sockets today, from Jakub Sitnicki. 4) Fix a syzkaller splat in bpf_mprog when hitting maximum program limits with BPF_F_BEFORE directive, from Daniel Borkmann and Nikolay Aleksandrov. 5) Fix BPF memory allocator to use kmalloc_size_roundup() to adjust size_index for selecting a bpf_mem_cache, from Hou Tao. 6) Fix arch_prepare_bpf_trampoline return code for s390 JIT, from Song Liu. 7) Fix bpf_trampoline_get when CONFIG_BPF_JIT is turned off, from Leon Hwang. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Use kmalloc_size_roundup() to adjust size_index selftest/bpf: Add various selftests for program limits bpf, mprog: Fix maximum program check on mprog attachment bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets bpf, sockmap: Add tests for MSG_F_PEEK bpf, sockmap: Do not inc copied_seq when PEEK flag set bpf: tcp_read_skb needs to pop skb regardless of seq bpf: unconditionally reset backtrack_state masks on global func exit bpf: Fix tr dereferencing selftests/bpf: Check bpf_cubic_acked() is called via struct_ops s390/bpf: Let arch_prepare_bpf_trampoline return program size ==================== Link: https://lore.kernel.org/r/20231002113417.2309-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04netfilter: handle the connecting collision properly in nf_conntrack_proto_sctpXin Long
In Scenario A and B below, as the delayed INIT_ACK always changes the peer vtag, SCTP ct with the incorrect vtag may cause packet loss. Scenario A: INIT_ACK is delayed until the peer receives its own INIT_ACK 192.168.1.2 > 192.168.1.1: [INIT] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT] [init tag: 1414468151] 192.168.1.2 > 192.168.1.1: [INIT ACK] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT ACK] [init tag: 1650211246] * 192.168.1.2 > 192.168.1.1: [COOKIE ECHO] 192.168.1.1 > 192.168.1.2: [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: [COOKIE ACK] Scenario B: INIT_ACK is delayed until the peer completes its own handshake 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] * This patch fixes it as below: In SCTP_CID_INIT processing: - clear ct->proto.sctp.init[!dir] if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir]. (Scenario E) - set ct->proto.sctp.init[dir]. In SCTP_CID_INIT_ACK processing: - drop it if !ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario B, Scenario C) - drop it if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario A) In SCTP_CID_COOKIE_ACK processing: - clear ct->proto.sctp.init[dir] and ct->proto.sctp.init[!dir]. (Scenario D) Also, it's important to allow the ct state to move forward with cookie_echo and cookie_ack from the opposite dir for the collision scenarios. There are also other Scenarios where it should allow the packet through, addressed by the processing above: Scenario C: new CT is created by INIT_ACK. Scenario D: start INIT on the existing ESTABLISHED ct. Scenario E: start INIT after the old collision on the existing ESTABLISHED ct. 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] (both side are stopped, then start new connection again in hours) 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 242308742] Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-10-04drm/nouveau: exec: report max pushs through getparamDanilo Krummrich
Report the maximum number of IBs that can be pushed with a single DRM_IOCTL_NOUVEAU_EXEC through DRM_IOCTL_NOUVEAU_GETPARAM. While the maximum number of IBs per ring might vary between chipsets, the kernel will make sure that userspace can only push a fraction of the maximum number of IBs per ring per job, such that we avoid a situation where there's only a single job occupying the ring, which could potentially lead to the ring run dry. Using DRM_IOCTL_NOUVEAU_GETPARAM to report the maximum number of IBs that can be pushed with a single DRM_IOCTL_NOUVEAU_EXEC implies that all channels of a given device have the same ring size. Reviewed-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231002135008.10651-3-dakr@redhat.com
2023-10-03ipv4/fib: send notify when delete source address routesHangbin Liu
After deleting an interface address in fib_del_ifaddr(), the function scans the fib_info list for stray entries and calls fib_flush() and fib_table_flush(). Then the stray entries will be deleted silently and no RTM_DELROUTE notification will be sent. This lack of notification can make routing daemons, or monitor like `ip monitor route` miss the routing changes. e.g. + ip link add dummy1 type dummy + ip link add dummy2 type dummy + ip link set dummy1 up + ip link set dummy2 up + ip addr add 192.168.5.5/24 dev dummy1 + ip route add 7.7.7.0/24 dev dummy2 src 192.168.5.5 + ip -4 route 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 + ip monitor route + ip addr del 192.168.5.5/24 dev dummy1 Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5 Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5 As Ido reminded, fib_table_flush() isn't only called when an address is deleted, but also when an interface is deleted or put down. The lack of notification in these cases is deliberate. And commit 7c6bb7d2faaf ("net/ipv6: Add knob to skip DELROUTE message on device down") introduced a sysctl to make IPv6 behave like IPv4 in this regard. So we can't send the route delete notify blindly in fib_table_flush(). To fix this issue, let's add a new flag in "struct fib_info" to track the deleted prefer source address routes, and only send notify for them. After update: + ip monitor route + ip addr del 192.168.5.5/24 dev dummy1 Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5 Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5 Deleted 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5 Suggested-by: Thomas Haller <thaller@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230922075508.848925-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-01Merge tag 'kbuild-fixes-v6.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix the module compression with xz so the in-kernel decompressor works - Document a kconfig idiom to express an optional dependency between modules - Make modpost, when W=1 is given, detect broken drivers that reference .exit.* sections - Remove unused code * tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove stale code for 'source' symlink in packaging scripts modpost: Don't let "driver"s reference .exit.* vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macros modpost: add missing else to the "of" check Documentation: kbuild: explain handling optional dependencies kbuild: Use CRC32 and a 1MiB dictionary for XZ compressed modules
2023-10-01Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Fourteen hotfixes, eleven of which are cc:stable. The remainder pertain to issues which were introduced after 6.5" * tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: Crash: add lock to serialize crash hotplug handling selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions() mm, memcg: reconsider kmem.limit_in_bytes deprecation mm: zswap: fix potential memory corruption on duplicate store arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries mm: hugetlb: add huge page size param to set_huge_pte_at() maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states maple_tree: add mas_is_active() to detect in-tree walks nilfs2: fix potential use after free in nilfs_gccache_submit_read_data() mm: abstract moving to the next PFN mm: report success more often from filemap_map_folio_range() fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
2023-10-01Merge tag 'timers-urgent-2023-10-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "Fix a spurious kernel warning during CPU hotplug events that may trigger when timer/hrtimer softirqs are pending, which are otherwise hotplug-safe and don't merit a warning" * tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Tag (hr)timer softirq as hotplug safe
2023-10-01neighbour: fix data-races around n->outputEric Dumazet
n->output field can be read locklessly, while a writer might change the pointer concurrently. Add missing annotations to prevent load-store tearing. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01Merge tag 'for-net-2023-09-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth bluetooth pull request for net: - Fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER - Fix handling of listen for ISO unicast - Fix build warnings - Fix leaking content of local_codecs - Add shutdown function for QCA6174 - Delete unused hci_req_prepare_suspend() declaration - Fix hci_link_tx_to RCU lock usage - Avoid redundant authentication Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-01vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macrosMasahiro Yamada
Remove the left-over of commit e24f6628811e ("modpost: remove all traces of cpuinit/cpuexit sections"). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2023-09-30Merge tag 'dma-mapping-6.6-2023-09-30' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - fix the narea calculation in swiotlb initialization (Ross Lagerwall) - fix the check whether a device has used swiotlb (Petr Tesarik) * tag 'dma-mapping-6.6-2023-09-30' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: fix the check whether a device has used software IO TLB swiotlb: use the calculated number of areas
2023-09-29mm: hugetlb: add huge page size param to set_huge_pte_at()Ryan Roberts
Patch series "Fix set_huge_pte_at() panic on arm64", v2. This series fixes a bug in arm64's implementation of set_huge_pte_at(), which can result in an unprivileged user causing a kernel panic. The problem was triggered when running the new uffd poison mm selftest for HUGETLB memory. This test (and the uffd poison feature) was merged for v6.5-rc7. Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable (correctly this time) to get it backported to v6.5, where the issue first showed up. Description of Bug ================== arm64's huge pte implementation supports multiple huge page sizes, some of which are implemented in the page table with multiple contiguous entries. So set_huge_pte_at() needs to work out how big the logical pte is, so that it can also work out how many physical ptes (or pmds) need to be written. It previously did this by grabbing the folio out of the pte and querying its size. However, there are cases when the pte being set is actually a swap entry. But this also used to work fine, because for huge ptes, we only ever saw migration entries and hwpoison entries. And both of these types of swap entries have a PFN embedded, so the code would grab that and everything still worked out. But over time, more calls to set_huge_pte_at() have been added that set swap entry types that do not embed a PFN. And this causes the code to go bang. The triggering case is for the uffd poison test, commit 99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") - added in v6.5-rc7. Although review shows that there are other call sites that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger on arm64 because arm64 doesn't support UFFD WP. If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise, it will dereference a bad pointer in page_folio(): static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry) { VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry)); return page_folio(pfn_to_page(swp_offset_pfn(entry))); } Fix === The simplest fix would have been to revert the dodgy cleanup commit 18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since things have moved on, this would have required an audit of all the new set_huge_pte_at() call sites to see if they should be converted to set_huge_swap_pte_at(). As per the original intent of the change, it would also leave us open to future bugs when people invariably get it wrong and call the wrong helper. So instead, I've added a huge page size parameter to set_huge_pte_at(). This means that the arm64 code has the size in all cases. It's a bigger change, due to needing to touch the arches that implement the function, but it is entirely mechanical, so in my view, low risk. I've compile-tested all touched arches; arm64, parisc, powerpc, riscv, s390, sparc (and additionally x86_64). I've additionally booted and run mm selftests against arm64, where I observe the uffd poison test is fixed, and there are no other regressions. This patch (of 2): In order to fix a bug, arm64 needs to be told the size of the huge page for which the pte is being set in set_huge_pte_at(). Provide for this by adding an `unsigned long sz` parameter to the function. This follows the same pattern as huge_pte_clear(). This commit makes the required interface modifications to the core mm as well as all arches that implement this function (arm64, parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed in a separate commit. No behavioral changes intended. Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx] Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change] Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> [6.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-29maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW statesLiam R. Howlett
When updating the maple tree iterator to avoid rewalks, an issue was introduced when shifting beyond the limits. This can be seen by trying to go to the previous address of 0, which would set the maple node to MAS_NONE and keep the range as the last entry. Subsequent calls to mas_find() would then search upwards from mas->last and skip the value at mas->index/mas->last. This showed up as a bug in mprotect which skips the actual VMA at the current range after attempting to go to the previous VMA from 0. Since MAS_NONE may already be set when searching for a value that isn't contained within a node, changing the handling of MAS_NONE in mas_find() would make the code more complicated and error prone. Furthermore, there was no way to tell which limit was hit, and thus which action to take (next or the entry at the current range). This solution is to add two states to track what happened with the previous iterator action. This allows for the expected behaviour of the next command to return the correct item (either the item at the range requested, or the next/previous). Tests are also added and updated accordingly. Link: https://lkml.kernel.org/r/20230921181236.509072-3-Liam.Howlett@oracle.com Link: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b Link: https://lore.kernel.org/linux-mm/20230921181236.509072-1-Liam.Howlett@oracle.com/ Fixes: 39193685d585 ("maple_tree: try harder to keep active node with mas_prev()") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Pedro Falcato <pedro.falcato@gmail.com> Closes: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b Closes: https://bugs.archlinux.org/task/79656 Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-29maple_tree: add mas_is_active() to detect in-tree walksLiam R. Howlett
Patch series "maple_tree: Fix mas_prev() state regression". Pedro Falcato retported an mprotect regression [1] which was bisected back to the iterator changes for maple tree. Root cause analysis showed the mas_prev() running off the end of the VMA space (previous from 0) followed by mas_find(), would skip the first value. This patchset introduces maple state underflow/overflow so the sequence of calls on the maple state will return what the user expects. Users who encounter this bug may see mprotect(), userfaultfd_register(), and mlock() fail on VMAs mapped with address 0. This patch (of 2): Instead of constantly checking each possibility of the maple state, create a fast path that will skip over checking unlikely states. Link: https://lkml.kernel.org/r/20230921181236.509072-1-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20230921181236.509072-2-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Pedro Falcato <pedro.falcato@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-29mm: abstract moving to the next PFNMatthew Wilcox (Oracle)
In order to fix the L1TF vulnerability, x86 can invert the PTE bits for PROT_NONE VMAs, which means we cannot move from one PTE to the next by adding 1 to the PFN field of the PTE. This results in the BUG reported at [1]. Abstract advancing the PTE to the next PFN through a pte_next_pfn() function/macro. Link: https://lkml.kernel.org/r/20230920040958.866520-1-willy@infradead.org Fixes: bcc6cc832573 ("mm: add default definition of set_ptes()") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by: syzbot+55cc72f8cc3a549119df@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/000000000000d099fa0604f03351@google.com [1] Reviewed-by: Yin Fengwei <fengwei.yin@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-29Merge tag 'ceph-for-6.6-rc4' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "A series that fixes an involved 'double watch error' deadlock in RBD marked for stable and two cleanups" * tag 'ceph-for-6.6-rc4' of https://github.com/ceph/ceph-client: rbd: take header_rwsem in rbd_dev_refresh() only when updating rbd: decouple parent info read-in from updating rbd_dev rbd: decouple header read-in from updating rbd_dev->header rbd: move rbd_dev_refresh() definition Revert "ceph: make members in struct ceph_mds_request_args_ext a union" ceph: remove unnecessary check for NULL in parse_longname()
2023-09-29Merge tag 'ata-6.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA fixes from Damien Le Moal: "A larger than usual set of fixes for 6.6-rc4 due to the unexpected number of fixes needed to address ATA disks suspend/resume issues. In more detail: - Add missing additionalProperties on child nodes to the pata-common DT bindings (Rob) - Fix handling of the REPORT SUPPORTED OPERATION CODES command to ignore reserved bits (Niklas) - Increase port multiplier soft reset timeout to accomodate slow devices and avoid issues on wakeup (Matthias) - A couple of minor code fixes to avoid compilation warnings in libata-core and libata-eh (me) - Many patches from me to address suspend/resume issues, and in particular a potential deadlock on resume due to the SCSI disk driver resume operation not being synchronized with libata EH port resume handling. This is addressed by changing the scsi disk driver disk start/stop control to allow libata to execute disk suspend (spin down) and resume (spin up) on its own during system suspend/resume. Runtime suspend/resume control remains with the SCSI disk driver. Other fixes include: - Fix libata power management request issuing to avoid races - Establish a link between ATA ports and SCSI devices to order PM operations - Fix device removal to avoid issues with driver rmmod removal - Fix synchronization of libata device rescan and SCSI disk resume operation - Remove libsas PM operations as suspend/resume is handled directly by the sas controller resume - Fix the SCSI disk driver to not issue commands to suspended disks, thus avoiding potential system lock-up on resume" * tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-eh: Fix compilation warning in ata_eh_link_report() ata: libata-core: Fix compilation warning in ata_dev_config_ncq() scsi: sd: Do not issue commands to suspended disks on shutdown ata: libata-core: Do not register PM operations for SAS ports ata: libata-scsi: Fix delayed scsi_rescan_device() execution scsi: Do not attempt to rescan suspended devices ata: libata-scsi: Disable scsi device manage_system_start_stop scsi: sd: Differentiate system and runtime start/stop management ata: libata-scsi: link ata port and scsi device ata: libata-core: Fix port and device removal ata: libata-core: Fix ata_port_request_pm() locking ata: libata-sata: increase PMP SRST timeout to 10s ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes
2023-09-29ASoC: core: Do not call link_exit() on uninitialized rtd objectsAmadeusz Sławiński
On init we have sequence: for_each_card_prelinks(card, i, dai_link) { ret = snd_soc_add_pcm_runtime(card, dai_link); ret = init_some_other_things(...); if (ret) goto probe_end: for_each_card_rtds(card, rtd) { ret = soc_init_pcm_runtime(card, rtd); probe_end: while on exit: for_each_card_rtds(card, rtd) snd_soc_link_exit(rtd); If init_some_other_things() step fails due to error we end up with not fully setup rtds and try to call snd_soc_link_exit on them, which depending on contents on .link_exit handler, can end up dereferencing NULL pointer. Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230929103243.705433-2-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-28scsi: Do not attempt to rescan suspended devicesDamien Le Moal
scsi_rescan_device() takes a scsi device lock before executing a device handler and device driver rescan methods. Waiting for the completion of any command issued to the device by these methods will thus be done with the device lock held. As a result, there is a risk of deadlocking within the power management code if scsi_rescan_device() is called to handle a device resume with the associated scsi device not yet resumed. Avoid such situation by checking that the target scsi device is in the running state, that is, fully capable of executing commands, before proceeding with the rescan and bailout returning -EWOULDBLOCK otherwise. With this error return, the caller can retry rescaning the device after a delay. The state check is done with the device lock held and is thus safe against incoming suspend power management operations. Fixes: 6aa0365a3c85 ("ata: libata-scsi: Avoid deadlock on rescan after device resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org>
2023-09-28ata: libata-scsi: Disable scsi device manage_system_start_stopDamien Le Moal
The introduction of a device link to create a consumer/supplier relationship between the scsi device of an ATA device and the ATA port of that ATA device fixes the ordering of system suspend and resume operations. For suspend, the scsi device is suspended first and the ata port after it. This is fine as this allows the synchronize cache and START STOP UNIT commands issued by the scsi disk driver to be executed before the ata port is disabled. For resume operations, the ata port is resumed first, followed by the scsi device. This allows having the request queue of the scsi device to be unfrozen after the ata port resume is scheduled in EH, thus avoiding to see new requests prematurely issued to the ATA device. Since libata sets manage_system_start_stop to 1, the scsi disk resume operation also results in issuing a START STOP UNIT command to the device being resumed so that the device exits standby power mode. However, restoring the ATA device to the active power mode must be synchronized with libata EH processing of the port resume operation to avoid either 1) seeing the start stop unit command being received too early when the port is not yet resumed and ready to accept commands, or after the port resume process issues commands such as IDENTIFY to revalidate the device. In this last case, the risk is that the device revalidation fails with timeout errors as the drive is still spun down. Commit 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") disabled issuing the START STOP UNIT command to avoid issues with it. But this is incorrect as transitioning a device to the active power mode from the standby power mode set on suspend requires a media access command. The IDENTIFY, READ LOG and SET FEATURES commands executed in libata EH context triggered by the ata port resume operation may thus fail. Fix these synchronization issues is by handling a device power mode transitions for system suspend and resume directly in libata EH context, without relying on the scsi disk driver management triggered with the manage_system_start_stop flag. To do this, the following libata helper functions are introduced: 1) ata_dev_power_set_standby(): This function issues a STANDBY IMMEDIATE command to transitiom a device to the standby power mode. For HDDs, this spins down the disks. This function applies only to ATA and ZAC devices and does nothing otherwise. This function also does nothing for devices that have the ATA_FLAG_NO_POWEROFF_SPINDOWN or ATA_FLAG_NO_HIBERNATE_SPINDOWN flag set. For suspend, call ata_dev_power_set_standby() in ata_eh_handle_port_suspend() before the port is disabled and frozen. ata_eh_unload() is also modified to transition all enabled devices to the standby power mode when the system is shutdown or devices removed. 2) ata_dev_power_set_active() and This function applies to ATA or ZAC devices and issues a VERIFY command for 1 sector at LBA 0 to transition the device to the active power mode. For HDDs, since this function will complete only once the disk spin up. Its execution uses the same timeouts as for reset, to give the drive enough time to complete spinup without triggering a command timeout. For resume, call ata_dev_power_set_active() in ata_eh_revalidate_and_attach() after the port has been enabled and before any other command is issued to the device. With these changes, the manage_system_start_stop and no_start_on_resume scsi device flags do not need to be set in ata_scsi_dev_config(). The flag manage_runtime_start_stop is still set to allow the sd driver to spinup/spindown a disk through the sd runtime operations. Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-28scsi: sd: Differentiate system and runtime start/stop managementDamien Le Moal
The underlying device and driver of a SCSI disk may have different system and runtime power mode control requirements. This is because runtime power management affects only the SCSI disk, while system level power management affects all devices, including the controller for the SCSI disk. For instance, issuing a START STOP UNIT command when a SCSI disk is runtime suspended and resumed is fine: the command is translated to a STANDBY IMMEDIATE command to spin down the ATA disk and to a VERIFY command to wake it up. The SCSI disk runtime operations have no effect on the ata port device used to connect the ATA disk. However, for system suspend/resume operations, the ATA port used to connect the device will also be suspended and resumed, with the resume operation requiring re-validating the device link and the device itself. In this case, issuing a VERIFY command to spinup the disk must be done before starting to revalidate the device, when the ata port is being resumed. In such case, we must not allow the SCSI disk driver to issue START STOP UNIT commands. Allow a low level driver to refine the SCSI disk start/stop management by differentiating system and runtime cases with two new SCSI device flags: manage_system_start_stop and manage_runtime_start_stop. These new flags replace the current manage_start_stop flag. Drivers setting the manage_start_stop are modifed to set both new flags, thus preserving the existing start/stop management behavior. For backward compatibility, the old manage_start_stop sysfs device attribute is kept as a read-only attribute showing a value of 1 for devices enabling both new flags and 0 otherwise. Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-28ata: libata-scsi: link ata port and scsi deviceDamien Le Moal
There is no direct device ancestry defined between an ata_device and its scsi device which prevents the power management code from correctly ordering suspend and resume operations. Create such ancestry with the ata device as the parent to ensure that the scsi device (child) is suspended before the ata device and that resume handles the ata device before the scsi device. The parent-child (supplier-consumer) relationship is established between the ata_port (parent) and the scsi device (child) with the function device_add_link(). The parent used is not the ata_device as the PM operations are defined per port and the status of all devices connected through that port is controlled from the port operations. The device link is established with the new function ata_scsi_slave_alloc(), and this function is used to define the ->slave_alloc callback of the scsi host template of all ata drivers. Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: John Garry <john.g.garry@oracle.com>
2023-09-27Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A single fix for libata: older devices don't support command duration limits (CDL) and some don't support report opcodes, meaning there's no way to tell if they support the command or not. Reduce the problems of incorrectly using CDL commands on older devices by checking SCSI spec compliance at SPC-5 (the spec which introduced the command) before turning on CDL" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: ata: Do no try to probe for CDL on old drives
2023-09-27timers: Tag (hr)timer softirq as hotplug safeFrederic Weisbecker
Specific stress involving frequent CPU-hotplug operations, such as running rcutorture for example, may trigger the following message: NOHZ tick-stop error: local softirq work is pending, handler #02!!!" This happens in the CPU-down hotplug process, after CPUHP_AP_SMPBOOT_THREADS whose teardown callback parks ksoftirqd, and before the target CPU shuts down through CPUHP_AP_IDLE_DEAD. In this fragile intermediate state, softirqs waiting for threaded handling may be forever ignored and eventually reported by the idle task as in the above example. However some vectors are known to be safe as long as the corresponding subsystems have teardown callbacks handling the migration of their events. The above error message reports pending timers softirq although this vector can be considered as hotplug safe because the CPUHP_TIMERS_PREPARE teardown callback performs the necessary migration of timers after the death of the CPU. Hrtimers also have a similar hotplug handling. Therefore this error message, as far as (hr-)timers are concerned, can be considered spurious and the relevant softirq vectors can be marked as hotplug safe. Fixes: 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230912104406.312185-6-frederic@kernel.org
2023-09-27swiotlb: fix the check whether a device has used software IO TLBPetr Tesarik
When CONFIG_SWIOTLB_DYNAMIC=y, devices which do not use the software IO TLB can avoid swiotlb lookup. A flag is added by commit 1395706a1490 ("swiotlb: search the software IO TLB only if the device makes use of it"), the flag is correctly set, but it is then never checked. Add the actual check here. Note that this code is an alternative to the default pool check, not an additional check, because: 1. swiotlb_find_pool() also searches the default pool; 2. if dma_uses_io_tlb is false, the default swiotlb pool is not used. Tested in a KVM guest against a QEMU RAM-backed SATA disk over virtio and *not* using software IO TLB, this patch increases IOPS by approx 2% for 4-way parallel I/O. The write memory barrier in swiotlb_dyn_alloc() is not needed, because a newly allocated pool must always be observed by swiotlb_find_slots() before an address from that pool is passed to is_swiotlb_buffer(). Correctness was verified using the following litmus test: C swiotlb-new-pool (* * Result: Never * * Check that a newly allocated pool is always visible when the * corresponding swiotlb buffer is visible. *) { mem_pools = default; } P0(int **mem_pools, int *pool) { /* add_mem_pool() */ WRITE_ONCE(*pool, 999); rcu_assign_pointer(*mem_pools, pool); } P1(int **mem_pools, int *flag, int *buf) { /* swiotlb_find_slots() */ int *r0; int r1; rcu_read_lock(); r0 = READ_ONCE(*mem_pools); r1 = READ_ONCE(*r0); rcu_read_unlock(); if (r1) { WRITE_ONCE(*flag, 1); smp_mb(); } /* device driver (presumed) */ WRITE_ONCE(*buf, r1); } P2(int **mem_pools, int *flag, int *buf) { /* device driver (presumed) */ int r0 = READ_ONCE(*buf); /* is_swiotlb_buffer() */ int r1; int *r2; int r3; smp_rmb(); r1 = READ_ONCE(*flag); if (r1) { /* swiotlb_find_pool() */ rcu_read_lock(); r2 = READ_ONCE(*mem_pools); r3 = READ_ONCE(*r2); rcu_read_unlock(); } } exists (2:r0<>0 /\ 2:r3=0) (* Not found. *) Fixes: 1395706a1490 ("swiotlb: search the software IO TLB only if the device makes use of it") Reported-by: Jonathan Corbet <corbet@lwn.net> Closes: https://lore.kernel.org/linux-iommu/87a5uz3ob8.fsf@meer.lwn.net/ Signed-off-by: Petr Tesarik <petr@tesarici.cz> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-09-25ata: libata-sata: increase PMP SRST timeout to 10sMatthias Schiffer
On certain SATA controllers, softreset fails after wakeup from S2RAM with the message "softreset failed (1st FIS failed)", sometimes resulting in drives not being detected again. With the increased timeout, this issue is avoided. Instead, "softreset failed (device not ready)" is now logged 1-2 times; this later failure seems to cause fewer problems however, and the drives are detected reliably once they've spun up and the probe is retried. The issue was observed with the primary SATA controller of the QNAP TS-453B, which is an "Intel Corporation Celeron/Pentium Silver Processor SATA Controller [8086:31e3] (rev 06)" integrated in the Celeron J4125 CPU, and the following drives: - Seagate IronWolf ST12000VN0008 - Seagate IronWolf ST8000NE0004 The SATA controller seems to be more relevant to this issue than the drives, as the same drives are always detected reliably on the secondary SATA controller on the same board (an ASMedia 106x) without any "softreset failed" errors even without the increased timeout. Fixes: e7d3ef13d52a ("libata: change drive ready wait after hard reset to 5s") Cc: stable@vger.kernel.org Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-09-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "ARM: - Fix EL2 Stage-1 MMIO mappings where a random address was used - Fix SMCCC function number comparison when the SVE hint is set RISC-V: - Fix KVM_GET_REG_LIST API for ISA_EXT registers - Fix reading ISA_EXT register of a missing extension - Fix ISA_EXT register handling in get-reg-list test - Fix filtering of AIA registers in get-reg-list test x86: - Fixes for TSC_AUX virtualization - Stop zapping page tables asynchronously, since we don't zap them as often as before" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Do not use user return MSR support for virtualized TSC_AUX KVM: SVM: Fix TSC_AUX virtualization setup KVM: SVM: INTERCEPT_RDTSCP is never intercepted anyway KVM: x86/mmu: Stop zapping invalidated TDP MMU roots asynchronously KVM: x86/mmu: Do not filter address spaces in for_each_tdp_mmu_root_yield_safe() KVM: x86/mmu: Open code leaf invalidation from mmu_notifier KVM: riscv: selftests: Selectively filter-out AIA registers KVM: riscv: selftests: Fix ISA_EXT register handling in get-reg-list RISC-V: KVM: Fix riscv_vcpu_get_isa_ext_single() for missing extensions RISC-V: KVM: Fix KVM_GET_REG_LIST API for ISA_EXT registers KVM: selftests: Assert that vasprintf() is successful KVM: arm64: nvhe: Ignore SVE hint in SMCCC function ID KVM: arm64: Properly return allocated EL2 VA from hyp_alloc_private_va_range()
generated by cgit (git 2.34.1) at 2025-05-20 02:34:57 +0000