| Age | Commit message (Collapse) | Author |
|---|
|
And the shared helper ipcomp_init_state.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Allow specifying the xfrm interface if_id and link as part of a route
metadata using the lwtunnel infrastructure.
This allows for example using a single xfrm interface in collect_md
mode as the target of multiple routes each specifying a different if_id.
With the appropriate changes to iproute2, considering an xfrm device
ipsec1 in collect_md mode one can for example add a route specifying
an if_id like so:
ip route add <SUBNET> dev ipsec1 encap xfrm if_id 1
In which case traffic routed to the device via this route would use
if_id in the xfrm interface policy lookup.
Or in the context of vrf, one can also specify the "link" property:
ip route add <SUBNET> dev ipsec1 encap xfrm if_id 1 link_dev eth15
Note: LWT_XFRM_LINK uses NLA_U32 similar to IFLA_XFRM_LINK even though
internally "link" is signed. This is consistent with other _LINK
attributes in other devices as well as in bpf and should not have an
effect as device indexes can't be negative.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This commit adds support for 'collect_md' mode on xfrm interfaces.
Each net can have one collect_md device, created by providing the
IFLA_XFRM_COLLECT_METADATA flag at creation. This device cannot be
altered and has no if_id or link device attributes.
On transmit to this device, the if_id is fetched from the attached dst
metadata on the skb. If exists, the link property is also fetched from
the metadata. The dst metadata type used is METADATA_XFRM which holds
these properties.
On the receive side, xfrmi_rcv_cb() populates a dst metadata for each
packet received and attaches it to the skb. The if_id used in this case is
fetched from the xfrm state, and the link is fetched from the incoming
device. This information can later be used by upper layers such as tc,
ebpf, and ip rules.
Because the skb is scrubed in xfrmi_rcv_cb(), the attachment of the dst
metadata is postponed until after scrubing. Similarly, xfrm_input() is
adapted to avoid dropping metadata dsts by only dropping 'valid'
(skb_valid_dst(skb) == true) dsts.
Policy matching on packets arriving from collect_md xfrmi devices is
done by using the xfrm state existing in the skb's sec_path.
The xfrm_if_cb.decode_cb() interface implemented by xfrmi_decode_session()
is changed to keep the details of the if_id extraction tucked away
in xfrm_interface.c.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
XFRM interfaces provide the association of various XFRM transformations
to a netdevice using an 'if_id' identifier common to both the XFRM data
structures (polcies, states) and the interface. The if_id is configured by
the controlling entity (usually the IKE daemon) and can be used by the
administrator to define logical relations between different connections.
For example, different connections can share the if_id identifier so
that they pass through the same interface, . However, currently it is
not possible for connections using a different if_id to use the same
interface while retaining the logical separation between them, without
using additional criteria such as skb marks or different traffic
selectors.
When having a large number of connections, it is useful to have a the
logical separation offered by the if_id identifier but use a single
network interface. Similar to the way collect_md mode is used in IP
tunnels.
This patch attempts to enable different configuration mechanisms - such
as ebpf programs, LWT encapsulations, and TC - to attach metadata
to skbs which would carry the if_id. This way a single xfrm interface in
collect_md mode can demux traffic based on this configuration on tx and
provide this metadata on rx.
The XFRM metadata is somewhat similar to ip tunnel metadata in that it
has an "id", and shares similar configuration entities (bpf, tc, ...),
however, it does not necessarily represent an IP tunnel or use other
ip tunnel information, and also has an optional "link" property which
can be used for affecting underlying routing decisions.
Additional xfrm related criteria may also be added in the future.
Therefore, a new metadata type is introduced, to be used in subsequent
patches in the xfrm interface and configuration entities.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf, can and netfilter.
A little larger than usual but it's all fixes, no late features. It's
large partially because of timing, and partially because of follow ups
to stuff that got merged a week or so before the merge window and
wasn't as widely tested. Maybe the Bluetooth fixes are a little
alarming so we'll address that, but the rest seems okay and not scary.
Notably we're including a fix for the netfilter Kconfig [1], your WiFi
warning [2] and a bluetooth fix which should unblock syzbot [3].
Current release - regressions:
- Bluetooth:
- don't try to cancel uninitialized works [3]
- L2CAP: fix use-after-free caused by l2cap_chan_put
- tls: rx: fix device offload after recent rework
- devlink: fix UAF on failed reload and leftover locks in mlxsw
Current release - new code bugs:
- netfilter:
- flowtable: fix incorrect Kconfig dependencies [1]
- nf_tables: fix crash when nf_trace is enabled
- bpf:
- use proper target btf when exporting attach_btf_obj_id
- arm64: fixes for bpf trampoline support
- Bluetooth:
- ISO: unlock on error path in iso_sock_setsockopt()
- ISO: fix info leak in iso_sock_getsockopt()
- ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP
- ISO: fix memory corruption on iso_pinfo.base
- ISO: fix not using the correct QoS
- hci_conn: fix updating ISO QoS PHY
- phy: dp83867: fix get nvmem cell fail
Previous releases - regressions:
- wifi: cfg80211: fix validating BSS pointers in
__cfg80211_connect_result [2]
- atm: bring back zatm uAPI after ATM had been removed
- properly fix old bug making bonding ARP monitor mode not being able
to work with software devices with lockless Tx
- tap: fix null-deref on skb->dev in dev_parse_header_protocol
- revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps some
devices and breaks others
- netfilter:
- nf_tables: many fixes rejecting cross-object linking which may
lead to UAFs
- nf_tables: fix null deref due to zeroed list head
- nf_tables: validate variable length element extension
- bgmac: fix a BUG triggered by wrong bytes_compl
- bcmgenet: indicate MAC is in charge of PHY PM
Previous releases - always broken:
- bpf:
- fix bad pointer deref in bpf_sys_bpf() injected via test infra
- disallow non-builtin bpf programs calling the prog_run command
- don't reinit map value in prealloc_lru_pop
- fix UAFs during the read of map iterator fd
- fix invalidity check for values in sk local storage map
- reject sleepable program for non-resched map iterator
- mptcp:
- move subflow cleanup in mptcp_destroy_common()
- do not queue data on closed subflows
- virtio_net: fix memory leak inside XDP_TX with mergeable
- vsock: fix memory leak when multiple threads try to connect()
- rework sk_user_data sharing to prevent psock leaks
- geneve: fix TOS inheriting for ipv4
- tunnels & drivers: do not use RT_TOS for IPv6 flowlabel
- phy: c45 baset1: do not skip aneg configuration if clock role is
not specified
- rose: avoid overflow when /proc displays timer information
- x25: fix call timeouts in blocking connects
- can: mcp251x: fix race condition on receive interrupt
- can: j1939:
- replace user-reachable WARN_ON_ONCE() with netdev_warn_once()
- fix memory leak of skbs in j1939_session_destroy()
Misc:
- docs: bpf: clarify that many things are not uAPI
- seg6: initialize induction variable to first valid array index (to
silence clang vs objtool warning)
- can: ems_usb: fix clang 14's -Wunaligned-access warning"
* tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (117 commits)
net: atm: bring back zatm uAPI
dpaa2-eth: trace the allocated address instead of page struct
net: add missing kdoc for struct genl_multicast_group::flags
nfp: fix use-after-free in area_cache_get()
MAINTAINERS: use my korg address for mt7601u
mlxsw: minimal: Fix deadlock in ports creation
bonding: fix reference count leak in balance-alb mode
net: usb: qmi_wwan: Add support for Cinterion MV32
bpf: Shut up kern_sys_bpf warning.
net/tls: Use RCU API to access tls_ctx->netdev
tls: rx: device: don't try to copy too much on detach
tls: rx: device: bound the frag walk
net_sched: cls_route: remove from list when handle is 0
selftests: forwarding: Fix failing tests with old libnet
net: refactor bpf_sk_reuseport_detach()
net: fix refcount bug in sk_psock_get (2)
selftests/bpf: Ensure sleepable program is rejected by hash map iter
selftests/bpf: Add write tests for sk local storage map iterator
selftests/bpf: Add tests for reading a dangling map iter fd
bpf: Only allow sleepable program for resched-able iterator
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix up direct references to the fwnode field in struct device
and extend ACPI device properties support.
Specifics:
- Replace direct references to the fwnode field in struct device with
dev_fwnode() and device_match_fwnode() (Andy Shevchenko)
- Make the ACPI code handling device properties support properties
with buffer values (Sakari Ailus)"
* tag 'acpi-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Fix error handling in acpi_init_properties()
ACPI: VIOT: Do not dereference fwnode in struct device
ACPI: property: Read buffer properties as integers
ACPI: property: Add support for parsing buffer property UUID
ACPI: property: Unify integer value reading functions
ACPI: property: Switch node property referencing from ifs to a switch
ACPI: property: Move property ref argument parsing into a new function
ACPI: property: Use acpi_object_type consistently in property ref parsing
ACPI: property: Tie data nodes to acpi handles
ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool
|
|
Pull more iomap updates from Darrick Wong:
"In the past 10 days or so I've not heard any ZOMG STOP style
complaints about removing ->writepage support from gfs2 or zonefs, so
here's the pull request removing them (and the underlying fs iomap
support) from the kernel:
- Remove iomap_writepage and all callers, since the mm apparently
never called the zonefs or gfs2 writepage functions"
* tag 'iomap-6.0-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: remove iomap_writepage
zonefs: remove ->writepage
gfs2: remove ->writepage
gfs2: stop using generic_writepages in gfs2_ail1_start_one
|
|
Pull ceph updates from Ilya Dryomov:
"We have a good pile of various fixes and cleanups from Xiubo, Jeff,
Luis and others, almost exclusively in the filesystem.
Several patches touch files outside of our normal purview to set the
stage for bringing in Jeff's long awaited ceph+fscrypt series in the
near future. All of them have appropriate acks and sat in linux-next
for a while"
* tag 'ceph-for-5.20-rc1' of https://github.com/ceph/ceph-client: (27 commits)
libceph: clean up ceph_osdc_start_request prototype
libceph: fix ceph_pagelist_reserve() comment typo
ceph: remove useless check for the folio
ceph: don't truncate file in atomic_open
ceph: make f_bsize always equal to f_frsize
ceph: flush the dirty caps immediatelly when quota is approaching
libceph: print fsid and epoch with osd id
libceph: check pointer before assigned to "c->rules[]"
ceph: don't get the inline data for new creating files
ceph: update the auth cap when the async create req is forwarded
ceph: make change_auth_cap_ses a global symbol
ceph: fix incorrect old_size length in ceph_mds_request_args
ceph: switch back to testing for NULL folio->private in ceph_dirty_folio
ceph: call netfs_subreq_terminated with was_async == false
ceph: convert to generic_file_llseek
ceph: fix the incorrect comment for the ceph_mds_caps struct
ceph: don't leak snap_rwsem in handle_cap_grant
ceph: prevent a client from exceeding the MDS maximum xattr size
ceph: choose auth MDS for getxattr with the Xs caps
ceph: add session already open notify support
...
|
|
Pull more kvm updates from Paolo Bonzini:
- Xen timer fixes
- Documentation formatting fixes
- Make rseq selftest compatible with glibc-2.35
- Fix handling of illegal LEA reg, reg
- Cleanup creation of debugfs entries
- Fix steal time cache handling bug
- Fixes for MMIO caching
- Optimize computation of number of LBRs
- Fix uninitialized field in guest_maxphyaddr < host_maxphyaddr path
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: x86/MMU: properly format KVM_CAP_VM_DISABLE_NX_HUGE_PAGES capability table
Documentation: KVM: extend KVM_CAP_VM_DISABLE_NX_HUGE_PAGES heading underline
KVM: VMX: Adjust number of LBR records for PERF_CAPABILITIES at refresh
KVM: VMX: Use proper type-safe functions for vCPU => LBRs helpers
KVM: x86: Refresh PMU after writes to MSR_IA32_PERF_CAPABILITIES
KVM: selftests: Test all possible "invalid" PERF_CAPABILITIES.LBR_FMT vals
KVM: selftests: Use getcpu() instead of sched_getcpu() in rseq_test
KVM: selftests: Make rseq compatible with glibc-2.35
KVM: Actually create debugfs in kvm_create_vm()
KVM: Pass the name of the VM fd to kvm_create_vm_debugfs()
KVM: Get an fd before creating the VM
KVM: Shove vcpu stats_id init into kvm_vcpu_init()
KVM: Shove vm stats_id init into kvm_create_vm()
KVM: x86/mmu: Add sanity check that MMIO SPTE mask doesn't overlap gen
KVM: x86/mmu: rename trace function name for asynchronous page fault
KVM: x86/xen: Stop Xen timer before changing IRQ
KVM: x86/xen: Initialize Xen timer only once
KVM: SVM: Disable SEV-ES support if MMIO caching is disable
KVM: x86/mmu: Fully re-evaluate MMIO caching when SPTE masks change
KVM: x86: Tag kvm_mmu_x86_module_init() with __init
...
|
|
Jiri reports that linux-atm does not build without this header.
Bring it back. It's completely dead code but we can't break
the build for user space :(
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Fixes: 052e1f01bfae ("net: atm: remove support for ZeitNet ZN122x ATM devices")
Link: https://lore.kernel.org/all/8576aef3-37e4-8bae-bab5-08f82a78efd3@kernel.org/
Link: https://lore.kernel.org/r/20220810164547.484378-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge changes adding support for device properties with buffer values
to the ACPI device properties handling code.
* acpi-properties:
ACPI: property: Fix error handling in acpi_init_properties()
ACPI: property: Read buffer properties as integers
ACPI: property: Add support for parsing buffer property UUID
ACPI: property: Unify integer value reading functions
ACPI: property: Switch node property referencing from ifs to a switch
ACPI: property: Move property ref argument parsing into a new function
ACPI: property: Use acpi_object_type consistently in property ref parsing
ACPI: property: Tie data nodes to acpi handles
ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool
|
|
Multicast group flags were added in commit 4d54cc32112d ("mptcp: avoid
lock_fast usage in accept path"), but it missed adding the kdoc.
Mention which flags go into that field, and do the same for
op structs.
Link: https://lore.kernel.org/r/20220809232012.403730-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, tls_device_down synchronizes with tls_device_resync_rx using
RCU, however, the pointer to netdev is stored using WRITE_ONCE and
loaded using READ_ONCE.
Although such approach is technically correct (rcu_dereference is
essentially a READ_ONCE, and rcu_assign_pointer uses WRITE_ONCE to store
NULL), using special RCU helpers for pointers is more valid, as it
includes additional checks and might change the implementation
transparently to the callers.
Mark the netdev pointer as __rcu and use the correct RCU helpers to
access it. For non-concurrent access pass the right conditions that
guarantee safe access (locks taken, refcount value). Also use the
correct helper in mlx5e, where even READ_ONCE was missing.
The transition to RCU exposes existing issues, fixed by this commit:
1. bond_tls_device_xmit could read netdev twice, and it could become
NULL the second time, after the NULL check passed.
2. Drivers shouldn't stop processing the last packet if tls_device_down
just set netdev to NULL, before tls_dev_del was called. This prevents a
possible packet drop when transitioning to the fallback software mode.
Fixes: 89df6a810470 ("net/bonding: Implement TLS TX device offload")
Fixes: c55dcdd435aa ("net/tls: Fix use-after-free after the TLS device goes down and up")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Link: https://lore.kernel.org/r/20220810081602.1435800-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
bpf 2022-08-10
We've added 23 non-merge commits during the last 7 day(s) which contain
a total of 19 files changed, 424 insertions(+), 35 deletions(-).
The main changes are:
1) Several fixes for BPF map iterator such as UAFs along with selftests, from Hou Tao.
2) Fix BPF syscall program's {copy,strncpy}_from_bpfptr() to not fault, from Jinghao Jia.
3) Reject BPF syscall programs calling BPF_PROG_RUN, from Alexei Starovoitov and YiFei Zhu.
4) Fix attach_btf_obj_id info to pick proper target BTF, from Stanislav Fomichev.
5) BPF design Q/A doc update to clarify what is not stable ABI, from Paul E. McKenney.
6) Fix BPF map's prealloc_lru_pop to not reinitialize, from Kumar Kartikeya Dwivedi.
7) Fix bpf_trampoline_put to avoid leaking ftrace hash, from Jiri Olsa.
8) Fix arm64 JIT to address sparse errors around BPF trampoline, from Xu Kuohai.
9) Fix arm64 JIT to use kvcalloc instead of kcalloc for internal program address
offset buffer, from Aijun Sun.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (23 commits)
selftests/bpf: Ensure sleepable program is rejected by hash map iter
selftests/bpf: Add write tests for sk local storage map iterator
selftests/bpf: Add tests for reading a dangling map iter fd
bpf: Only allow sleepable program for resched-able iterator
bpf: Check the validity of max_rdwr_access for sock local storage map iterator
bpf: Acquire map uref in .init_seq_private for sock{map,hash} iterator
bpf: Acquire map uref in .init_seq_private for sock local storage map iterator
bpf: Acquire map uref in .init_seq_private for hash map iterator
bpf: Acquire map uref in .init_seq_private for array map iterator
bpf: Disallow bpf programs call prog_run command.
bpf, arm64: Fix bpf trampoline instruction endianness
selftests/bpf: Add test for prealloc_lru_pop bug
bpf: Don't reinit map value in prealloc_lru_pop
bpf: Allow calling bpf_prog_test kfuncs in tracing programs
bpf, arm64: Allocate program buffer using kvcalloc instead of kcalloc
selftests/bpf: Excercise bpf_obj_get_info_by_fd for bpf2bpf
bpf: Use proper target btf when exporting attach_btf_obj_id
mptcp, btf: Add struct mptcp_sock definition when CONFIG_MPTCP is disabled
bpf: Cleanup ftrace hash in bpf_trampoline_put
BPF: Fix potential bad pointer dereference in bpf_sys_bpf()
...
====================
Link: https://lore.kernel.org/r/20220810190624.10748-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller reports refcount bug as follows:
------------[ cut here ]------------
refcount_t: saturated; leaking memory.
WARNING: CPU: 1 PID: 3605 at lib/refcount.c:19 refcount_warn_saturate+0xf4/0x1e0 lib/refcount.c:19
Modules linked in:
CPU: 1 PID: 3605 Comm: syz-executor208 Not tainted 5.18.0-syzkaller-03023-g7e062cda7d90 #0
<TASK>
__refcount_add_not_zero include/linux/refcount.h:163 [inline]
__refcount_inc_not_zero include/linux/refcount.h:227 [inline]
refcount_inc_not_zero include/linux/refcount.h:245 [inline]
sk_psock_get+0x3bc/0x410 include/linux/skmsg.h:439
tls_data_ready+0x6d/0x1b0 net/tls/tls_sw.c:2091
tcp_data_ready+0x106/0x520 net/ipv4/tcp_input.c:4983
tcp_data_queue+0x25f2/0x4c90 net/ipv4/tcp_input.c:5057
tcp_rcv_state_process+0x1774/0x4e80 net/ipv4/tcp_input.c:6659
tcp_v4_do_rcv+0x339/0x980 net/ipv4/tcp_ipv4.c:1682
sk_backlog_rcv include/net/sock.h:1061 [inline]
__release_sock+0x134/0x3b0 net/core/sock.c:2849
release_sock+0x54/0x1b0 net/core/sock.c:3404
inet_shutdown+0x1e0/0x430 net/ipv4/af_inet.c:909
__sys_shutdown_sock net/socket.c:2331 [inline]
__sys_shutdown_sock net/socket.c:2325 [inline]
__sys_shutdown+0xf1/0x1b0 net/socket.c:2343
__do_sys_shutdown net/socket.c:2351 [inline]
__se_sys_shutdown net/socket.c:2349 [inline]
__x64_sys_shutdown+0x50/0x70 net/socket.c:2349
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
During SMC fallback process in connect syscall, kernel will
replaces TCP with SMC. In order to forward wakeup
smc socket waitqueue after fallback, kernel will sets
clcsk->sk_user_data to origin smc socket in
smc_fback_replace_callbacks().
Later, in shutdown syscall, kernel will calls
sk_psock_get(), which treats the clcsk->sk_user_data
as psock type, triggering the refcnt warning.
So, the root cause is that smc and psock, both will use
sk_user_data field. So they will mismatch this field
easily.
This patch solves it by using another bit(defined as
SK_USER_DATA_PSOCK) in PTRMASK, to mark whether
sk_user_data points to a psock object or not.
This patch depends on a PTRMASK introduced in commit f1ff5ce2cd5e
("net, sk_msg: Clear sk_user_data pointer on clone if tagged").
For there will possibly be more flags in the sk_user_data field,
this patch also refactor sk_user_data flags code to be more generic
to improve its maintainability.
Reported-and-tested-by: syzbot+5f26f85569bd179c18ce@syzkaller.appspotmail.com
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- pNFS/flexfiles: Fix infinite looping when the RDMA connection
errors out
Bugfixes:
- NFS: fix port value parsing
- SUNRPC: Reinitialise the backchannel request buffers before reuse
- SUNRPC: fix expiry of auth creds
- NFSv4: Fix races in the legacy idmapper upcall
- NFS: O_DIRECT fixes from Jeff Layton
- NFSv4.1: Fix OP_SEQUENCE error handling
- SUNRPC: Fix an RPC/RDMA performance regression
- NFS: Fix case insensitive renames
- NFSv4/pnfs: Fix a use-after-free bug in open
- NFSv4.1: RECLAIM_COMPLETE must handle EACCES
Features:
- NFSv4.1: session trunking enhancements
- NFSv4.2: READ_PLUS performance optimisations
- NFS: relax the rules for rsize/wsize mount options
- NFS: don't unhash dentry during unlink/rename
- SUNRPC: Fail faster on bad verifier
- NFS/SUNRPC: Various tracing improvements"
* tag 'nfs-for-5.20-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (46 commits)
NFS: Improve readpage/writepage tracing
NFS: Improve O_DIRECT tracing
NFS: Improve write error tracing
NFS: don't unhash dentry during unlink/rename
NFSv4/pnfs: Fix a use-after-free bug in open
NFS: nfs_async_write_reschedule_io must not recurse into the writeback code
SUNRPC: Don't reuse bvec on retransmission of the request
SUNRPC: Reinitialise the backchannel request buffers before reuse
NFSv4.1: RECLAIM_COMPLETE must handle EACCES
NFSv4.1 probe offline transports for trunking on session creation
SUNRPC create a function that probes only offline transports
SUNRPC export xprt_iter_rewind function
SUNRPC restructure rpc_clnt_setup_test_and_add_xprt
NFSv4.1 remove xprt from xprt_switch if session trunking test fails
SUNRPC create an rpc function that allows xprt removal from rpc_clnt
SUNRPC enable back offline transports in trunking discovery
SUNRPC create an iterator to list only OFFLINE xprts
NFSv4.1 offline trunkable transports on DESTROY_SESSION
SUNRPC add function to offline remove trunkable transports
SUNRPC expose functions for offline remote xprt functionality
...
|
|
Rename the tracepoint function from trace_kvm_async_pf_doublefault() to
trace_kvm_async_pf_repeated_fault() to make it clear, since double fault
has nothing to do with this trace function.
Asynchronous Page Fault (APF) is an artifact generated by KVM when it
cannot find a physical page to satisfy an EPT violation. KVM uses APF to
tell the guest OS to do something else such as scheduling other guest
processes to make forward progress. However, when another guest process
also touches a previously APFed page, KVM halts the vCPU instead of
generating a repeated APF to avoid wasting cycles.
Double fault (#DF) clearly has a different meaning and a different
consequence when triggered. #DF requires two nested contributory exceptions
instead of two page faults faulting at the same address. A prevous bug on
APF indicates that it may trigger a double fault in the guest [1] and
clearly this trace function has nothing to do with it. So rename this
function should be a valid choice.
No functional change intended.
[1] https://www.spinics.net/lists/kvm/msg214957.html
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220807052141.69186-1-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull remaining MM updates from Andrew Morton:
"Three patch series - two that perform cleanups and one feature:
- hugetlb_vmemmap cleanups from Muchun Song
- hardware poisoning support for 1GB hugepages, from Naoya Horiguchi
- highmem documentation fixups from Fabio De Francesco"
* tag 'mm-stable-2022-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
Documentation/mm: add details about kmap_local_page() and preemption
highmem: delete a sentence from kmap_local_page() kdocs
Documentation/mm: rrefer kmap_local_page() and avoid kmap()
Documentation/mm: avoid invalid use of addresses from kmap_local_page()
Documentation/mm: don't kmap*() pages which can't come from HIGHMEM
highmem: specify that kmap_local_page() is callable from interrupts
highmem: remove unneeded spaces in kmap_local_page() kdocs
mm, hwpoison: enable memory error handling on 1GB hugepage
mm, hwpoison: skip raw hwpoison page in freeing 1GB hugepage
mm, hwpoison: make __page_handle_poison returns int
mm, hwpoison: set PG_hwpoison for busy hugetlb pages
mm, hwpoison: make unpoison aware of raw error info in hwpoisoned hugepage
mm, hwpoison, hugetlb: support saving mechanism of raw error pages
mm/hugetlb: make pud_huge() and follow_huge_pud() aware of non-present pud entry
mm/hugetlb: check gigantic_page_runtime_supported() in return_unused_surplus_pages()
mm: hugetlb_vmemmap: use PTRS_PER_PTE instead of PMD_SIZE / PAGE_SIZE
mm: hugetlb_vmemmap: move code comments to vmemmap_dedup.rst
mm: hugetlb_vmemmap: improve hugetlb_vmemmap code readability
mm: hugetlb_vmemmap: replace early_param() with core_param()
mm: hugetlb_vmemmap: move vmemmap code related to HugeTLB to hugetlb_vmemmap.c
...
|
|
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for 6.0:
- Introduce a 'struct cxl_region' object with support for
provisioning and assembling persistent memory regions.
- Introduce alloc_free_mem_region() to accompany the existing
request_free_mem_region() as a method to allocate physical memory
capacity out of an existing resource.
- Export insert_resource_expand_to_fit() for the CXL subsystem to
late-publish CXL platform windows in iomem_resource.
- Add a polled mode PCI DOE (Data Object Exchange) driver service and
use it in cxl_pci to retrieve the CDAT (Coherent Device Attribute
Table)"
* tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (74 commits)
cxl/hdm: Fix skip allocations vs multiple pmem allocations
cxl/region: Disallow region granularity != window granularity
cxl/region: Fix x1 interleave to greater than x1 interleave routing
cxl/region: Move HPA setup to cxl_region_attach()
cxl/region: Fix decoder interleave programming
Documentation: cxl: remove dangling kernel-doc reference
cxl/region: describe targets and nr_targets members of cxl_region_params
cxl/regions: add padding for cxl_rr_ep_add nested lists
cxl/region: Fix IS_ERR() vs NULL check
cxl/region: Fix region reference target accounting
cxl/region: Fix region commit uninitialized variable warning
cxl/region: Fix port setup uninitialized variable warnings
cxl/region: Stop initializing interleave granularity
cxl/hdm: Fix DPA reservation vs cxl_endpoint_decoder lifetime
cxl/acpi: Minimize granularity for x1 interleaves
cxl/region: Delete 'region' attribute from root decoders
cxl/acpi: Autoload driver for 'cxl_acpi' test devices
cxl/region: decrement ->nr_targets on error in cxl_region_attach()
cxl/region: prevent underflow in ways_to_cxl()
cxl/region: uninitialized variable in alloc_hpa()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Outside the pinctrl driver and DT bindings we hit some Arm DT files,
patched by the maintainers.
Other than that it is business as usual.
Core changes:
- Add PINCTRL_PINGROUP() helper macro (and use it in the AMD driver).
New drivers:
- Intel Meteor Lake support.
- Reneasas RZ/V2M and r8a779g0 (R-Car V4H).
- AXP209 variants AXP221, AXP223 and AXP809.
- Qualcomm MSM8909, PM8226, PMP8074 and SM6375.
- Allwinner D1.
Improvements:
- Proper pin multiplexing in the AMD driver.
- Mediatek MT8192 can use generic drive strength and pin bias, then
fixes on top plus some I2C pin group fixes.
- Have the Allwinner Sunplus SP7021 use the generic DT schema and
make interrupts optional.
- Handle Qualcomm SC7280 ADSP.
- Handle Qualcomm MSM8916 CAMSS GP clock muxing.
- High impedance bias on ZynqMP.
- Serialize StarFive access to MMIO.
- Immutable gpiochip for BCM2835, Ingenic, Qualcomm SPMI GPIO"
* tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (117 commits)
dt-bindings: pinctrl: qcom,pmic-gpio: add PM8226 constraints
pinctrl: qcom: Make PINCTRL_SM8450 depend on PINCTRL_MSM
pinctrl: qcom: sm8250: Fix PDC map
pinctrl: amd: Fix an unused variable
dt-bindings: pinctrl: mt8186: Add and use drive-strength-microamp
dt-bindings: pinctrl: mt8186: Add gpio-line-names property
ARM: dts: imxrt1170-pinfunc: Add pinctrl binding header
pinctrl: amd: Use unicode for debugfs output
pinctrl: amd: Fix newline declaration in debugfs output
pinctrl: at91: Fix typo 'the the' in comment
dt-bindings: pinctrl: st,stm32: Correct 'resets' property name
pinctrl: mvebu: Missing a blank line after declarations.
pinctrl: qcom: Add SM6375 TLMM driver
dt-bindings: pinctrl: Add DT schema for SM6375 TLMM
dt-bindings: pinctrl: mt8195: Use drive-strength-microamp in examples
Revert "pinctrl: qcom: spmi-gpio: make the irqchip immutable"
pinctrl: imx93: Add MODULE_DEVICE_TABLE()
pinctrl: sunxi: Add driver for Allwinner D1
pinctrl: sunxi: Make some layout parameters dynamic
pinctrl: sunxi: Refactor register/offset calculation
...
|
|
Commit 50a896cf2d6f ("genetlink: properly support per-op policy dumping")
seems to have copy'n'pasted things a little incorrectly.
The #define CTRL_ATTR_MCAST_GRP_MAX should have stayed right
after the previous enum. The new CTRL_ATTR_POLICY_* needs
its own define for MAX and that max should not contain the
superfluous _DUMP in the name.
We probably can't do anything about the CTRL_ATTR_POLICY_DUMP_MAX
any more, there's likely code which uses it. For consistency
(*cough* codegen *cough*) let's add the correctly name define
nonetheless.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
s/by caused/be caused/
s/ax88786/ax88796/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7db4b622d2c3e5af58c1d1f32b81836f4af71f18.1659801746.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let's have a look at this piece of code in __bread_slow:
get_bh(bh);
bh->b_end_io = end_buffer_read_sync;
submit_bh(REQ_OP_READ, 0, bh);
wait_on_buffer(bh);
if (buffer_uptodate(bh))
return bh;
Neither wait_on_buffer nor buffer_uptodate contain any memory barrier.
Consequently, if someone calls sb_bread and then reads the buffer data,
the read of buffer data may be executed before wait_on_buffer(bh) on
architectures with weak memory ordering and it may return invalid data.
Fix this bug by adding a memory barrier to set_buffer_uptodate and an
acquire barrier to buffer_uptodate (in a similar way as
folio_test_uptodate and folio_mark_uptodate).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull nfsd updates from Chuck Lever:
"Work on 'courteous server', which was introduced in 5.19, continues
apace. This release introduces a more flexible limit on the number of
NFSv4 clients that NFSD allows, now that NFSv4 clients can remain in
courtesy state long after the lease expiration timeout. The client
limit is adjusted based on the physical memory size of the server.
The NFSD filecache is a cache of files held open by NFSv4 clients or
recently touched by NFSv2 or NFSv3 clients. This cache had some
significant scalability constraints that have been relieved in this
release. Thanks to all who contributed to this work.
A data corruption bug found during the most recent NFS bake-a-thon
that involves NFSv3 and NFSv4 clients writing the same file has been
addressed in this release.
This release includes several improvements in CPU scalability for
NFSv4 operations. In addition, Neil Brown provided patches that
simplify locking during file lookup, creation, rename, and removal
that enables subsequent work on making these operations more scalable.
We expect to see that work materialize in the next release.
There are also numerous single-patch fixes, clean-ups, and the usual
improvements in observability"
* tag 'nfsd-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (78 commits)
lockd: detect and reject lock arguments that overflow
NFSD: discard fh_locked flag and fh_lock/fh_unlock
NFSD: use (un)lock_inode instead of fh_(un)lock for file operations
NFSD: use explicit lock/unlock for directory ops
NFSD: reduce locking in nfsd_lookup()
NFSD: only call fh_unlock() once in nfsd_link()
NFSD: always drop directory lock in nfsd_unlink()
NFSD: change nfsd_create()/nfsd_symlink() to unlock directory before returning.
NFSD: add posix ACLs to struct nfsd_attrs
NFSD: add security label to struct nfsd_attrs
NFSD: set attributes when creating symlinks
NFSD: introduce struct nfsd_attrs
NFSD: verify the opened dentry after setting a delegation
NFSD: drop fh argument from alloc_init_deleg
NFSD: Move copy offload callback arguments into a separate structure
NFSD: Add nfsd4_send_cb_offload()
NFSD: Remove kmalloc from nfsd4_do_async_copy()
NFSD: Refactor nfsd4_do_copy()
NFSD: Refactor nfsd4_cleanup_inter_ssc() (2/2)
NFSD: Refactor nfsd4_cleanup_inter_ssc() (1/2)
...
|
|
Extend struct nft_data_desc to add a flag field that specifies
nft_data_init() is being called for set element data.
Use it to disallow jump to implicit chain from set element, only jump
to chain via immediate expression is allowed.
Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Instead of parsing the data and then validate that type and length are
correct, pass a description of the expected data so it can be validated
upfront before parsing it to bail out earlier.
This patch adds a new .size field to specify the maximum size of the
data area. The .len field is optional and it is used as an input/output
field, it provides the specific length of the expected data in the input
path. If then .len field is not specified, then obtained length from the
netlink attribute is stored. This is required by cmp, bitwise, range and
immediate, which provide no netlink attribute that describes the data
length. The immediate expression uses the destination register type to
infer the expected data type.
Relying on opencoded validation of the expected data might lead to
subtle bugs as described in 7e6bc1f6cabc ("netfilter: nf_tables:
stricter validation of element data").
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Don't leak request pointers, but use the "device:inode" labelling that
is used by all the other trace points. Furthermore, replace use of page
indexes with an offset, again in order to align behaviour with other
NFS trace points.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
s/_IPT_LOG_H/_IP6T_LOG_H/
While at it add some surrounding space to ease reading.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Update template to validate variable length extensions. This patch adds
a new .ext_len[id] field to the template to store the expected extension
length. This is used to sanity check the initialization of the variable
length extension.
Use PTR_ERR() in nft_set_elem_init() to report errors since, after this
update, there are two reason why this might fail, either because of
ENOMEM or insufficient room in the extension field (EINVAL).
Kernels up until 7e6bc1f6cabc ("netfilter: nf_tables: stricter
validation of element data") allowed to copy more data to the extension
than was allocated. This ext_len field allows to validate if the
destination has the correct size as additional check.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache updates from David Howells:
- Fix a cookie access ref leak if a cookie is invalidated a second time
before the first invalidation is actually processed.
- Add a tracepoint to log cookie lookup failure
* tag 'fscache-fixes-20220809' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache: add tracepoint when failing cookie
fscache: don't leak cookie access refs if invalidation is in progress or failed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"Fix AFS refcount handling.
The first patch converts afs to use refcount_t for its refcounts and
the second patch fixes afs_put_call() and afs_put_server() to save the
values they're going to log in the tracepoint before decrementing the
refcount"
* tag 'afs-fixes-20220802' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix access after dec in put functions
afs: Use refcount_t rather than atomic_t
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull setgid updates from Christian Brauner:
"This contains the work to move setgid stripping out of individual
filesystems and into the VFS itself.
Creating files that have both the S_IXGRP and S_ISGID bit raised in
directories that themselves have the S_ISGID bit set requires
additional privileges to avoid security issues.
When a filesystem creates a new inode it needs to take care that the
caller is either in the group of the newly created inode or they have
CAP_FSETID in their current user namespace and are privileged over the
parent directory of the new inode. If any of these two conditions is
true then the S_ISGID bit can be raised for an S_IXGRP file and if not
it needs to be stripped.
However, there are several key issues with the current implementation:
- S_ISGID stripping logic is entangled with umask stripping.
For example, if the umask removes the S_IXGRP bit from the file
about to be created then the S_ISGID bit will be kept.
The inode_init_owner() helper is responsible for S_ISGID stripping
and is called before posix_acl_create(). So we can end up with two
different orderings:
1. FS without POSIX ACL support
First strip umask then strip S_ISGID in inode_init_owner().
In other words, if a filesystem doesn't support or enable POSIX
ACLs then umask stripping is done directly in the vfs before
calling into the filesystem:
2. FS with POSIX ACL support
First strip S_ISGID in inode_init_owner() then strip umask in
posix_acl_create().
In other words, if the filesystem does support POSIX ACLs then
unmask stripping may be done in the filesystem itself when
calling posix_acl_create().
Note that technically filesystems are free to impose their own
ordering between posix_acl_create() and inode_init_owner() meaning
that there's additional ordering issues that influence S_ISGID
inheritance.
(Note that the commit message of commit 1639a49ccdce ("fs: move
S_ISGID stripping into the vfs_*() helpers") gets the ordering
between inode_init_owner() and posix_acl_create() the wrong way
around. I realized this too late.)
- Filesystems that don't rely on inode_init_owner() don't get S_ISGID
stripping logic.
While that may be intentional (e.g. network filesystems might just
defer setgid stripping to a server) it is often just a security
issue.
Note that mandating the use of inode_init_owner() was proposed as
an alternative solution but that wouldn't fix the ordering issues
and there are examples such as afs where the use of
inode_init_owner() isn't possible.
In any case, we should also try the cleaner and generalized
solution first before resorting to this approach.
- We still have S_ISGID inheritance bugs years after the initial
round of S_ISGID inheritance fixes:
e014f37db1a2 ("xfs: use setattr_copy to set vfs inode attributes")
01ea173e103e ("xfs: fix up non-directory creation in SGID directories")
fd84bfdddd16 ("ceph: fix up non-directory creation in SGID directories")
All of this led us to conclude that the current state is too messy.
While we won't be able to make it completely clean as
posix_acl_create() is still a filesystem specific call we can improve
the S_SIGD stripping situation quite a bit by hoisting it out of
inode_init_owner() and into the respective vfs creation operations.
The obvious advantage is that we don't need to rely on individual
filesystems getting S_ISGID stripping right and instead can
standardize the ordering between S_ISGID and umask stripping directly
in the VFS.
A few short implementation notes:
- The stripping logic needs to happen in vfs_*() helpers for the sake
of stacking filesystems such as overlayfs that rely on these
helpers taking care of S_ISGID stripping.
- Security hooks have never seen the mode as it is ultimately seen by
the filesystem because of the ordering issue we mentioned. Nothing
is changed for them. We simply continue to strip the umask before
passing the mode down to the security hooks.
- The following filesystems use inode_init_owner() and thus relied on
S_ISGID stripping: spufs, 9p, bfs, btrfs, ext2, ext4, f2fs,
hfsplus, hugetlbfs, jfs, minix, nilfs2, ntfs3, ocfs2, omfs,
overlayfs, ramfs, reiserfs, sysv, ubifs, udf, ufs, xfs, zonefs,
bpf, tmpfs.
We've audited all callchains as best as we could. More details can
be found in the commit message to 1639a49ccdce ("fs: move S_ISGID
stripping into the vfs_*() helpers")"
* tag 'fs.setgid.v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
ceph: rely on vfs for setgid stripping
fs: move S_ISGID stripping into the vfs_*() helpers
fs: Add missing umask strip in vfs_tmpfile
fs: add mode_strip_sgid() helper
|
|
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more iov_iter updates from Al Viro:
- more new_sync_{read,write}() speedups - ITER_UBUF introduction
- ITER_PIPE cleanups
- unification of iov_iter_get_pages/iov_iter_get_pages_alloc and
switching them to advancing semantics
- making ITER_PIPE take high-order pages without splitting them
- handling copy_page_from_iter() for high-order pages properly
* tag 'pull-work.iov_iter-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
fix copy_page_from_iter() for compound destinations
hugetlbfs: copy_page_to_iter() can deal with compound pages
copy_page_to_iter(): don't split high-order page in case of ITER_PIPE
expand those iov_iter_advance()...
pipe_get_pages(): switch to append_pipe()
get rid of non-advancing variants
ceph: switch the last caller of iov_iter_get_pages_alloc()
9p: convert to advancing variant of iov_iter_get_pages_alloc()
af_alg_make_sg(): switch to advancing variant of iov_iter_get_pages()
iter_to_pipe(): switch to advancing variant of iov_iter_get_pages()
block: convert to advancing variants of iov_iter_get_pages{,_alloc}()
iov_iter: advancing variants of iov_iter_get_pages{,_alloc}()
iov_iter: saner helper for page array allocation
fold __pipe_get_pages() into pipe_get_pages()
ITER_XARRAY: don't open-code DIV_ROUND_UP()
unify the rest of iov_iter_get_pages()/iov_iter_get_pages_alloc() guts
unify xarray_get_pages() and xarray_get_pages_alloc()
unify pipe_get_pages() and pipe_get_pages_alloc()
iov_iter_get_pages(): sanity-check arguments
iov_iter_get_pages_alloc(): lift freeing pages array on failure exits into wrapper
...
|
|
mechanical change; will be further massaged in subsequent commits
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Most of the users immediately follow successful iov_iter_get_pages()
with advancing by the amount it had returned.
Provide inline wrappers doing that, convert trivial open-coded
uses of those.
BTW, iov_iter_get_pages() never returns more than it had been asked
to; such checks in cifs ought to be removed someday...
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
All their callers are next to each other; all of them
want the total amount of pages and, possibly, the
offset in the partial final buffer.
Combine into a new helper (pipe_npages()), fix the
bogosity in pipe_space_for_user(), while we are at it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Equivalent of single-segment iovec. Initialized by iov_iter_ubuf(),
checked for by iter_is_ubuf(), otherwise behaves like ITER_IOVEC
ones.
We are going to expose the things like ->write_iter() et.al. to those
in subsequent commits.
New predicate (user_backed_iter()) that is true for ITER_IOVEC and
ITER_UBUF; places like direct-IO handling should use that for
checking that pages we modify after getting them from iov_iter_get_pages()
would need to be dirtied.
DO NOT assume that replacing iter_is_iovec() with user_backed_iter()
will solve all problems - there's code that uses iter_is_iovec() to
decide how to poke around in iov_iter guts and for that the predicate
replacement obviously won't suffice.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
kmap_local_page() should always be preferred in place of kmap() and
kmap_atomic(). "Only use when really necessary." is not consistent with
the Documentation/mm/highmem.rst and these kdocs it embeds.
Therefore, delete the above-mentioned sentence from kdocs.
Link: https://lkml.kernel.org/r/20220728154844.10874-7-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In a recent thread about converting kmap() to kmap_local_page(), the
safety of calling kmap_local_page() was questioned.[1]
"any context" should probably be enough detail for users who want to know
whether or not kmap_local_page() can be called from interrupts. However,
Linux still has kmap_atomic() which might make users think they must use
the latter in interrupts.
Add "including interrupts" for better clarity.
[1] https://lore.kernel.org/lkml/3187836.aeNJFYEL58@opensuse/
Link: https://lkml.kernel.org/r/20220728154844.10874-3-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "highmem: Extend kmap_local_page() documentation", v2.
The Highmem interface is evolving and the current documentation does not
reflect the intended uses of each of the calls. Furthermore, after a
recent series of reworks, the differences of the calls can still be
confusing and may lead to the expanded use of calls which are deprecated.
This series is the second round of changes towards an enhanced
documentation of the Highmem's interface; at this stage the patches are
only focused to kmap_local_page().
In addition it also contains some minor clean ups.
This patch (of 7):
In the kdocs of kmap_local_page(), the description of @page starts after
several unnecessary spaces.
Therefore, remove those spaces.
Link: https://lkml.kernel.org/r/20220728154844.10874-1-fmdefrancesco@gmail.com
Link: https://lkml.kernel.org/r/20220728154844.10874-2-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now error handling code is prepared, so remove the blocking code and
enable memory error handling on 1GB hugepage.
Link: https://lkml.kernel.org/r/20220714042420.1847125-9-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If memory_failure() fails to grab page refcount on a hugetlb page because
it's busy, it returns without setting PG_hwpoison on it. This not only
loses a chance of error containment, but breaks the rule that
action_result() should be called only when memory_failure() do any of
handling work (even if that's just setting PG_hwpoison). This
inconsistency could harm code maintainability.
So set PG_hwpoison and call hugetlb_set_page_hwpoison() for such a case.
Link: https://lkml.kernel.org/r/20220714042420.1847125-6-naoya.horiguchi@linux.dev
Fixes: 405ce051236c ("mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Raw error info list needs to be removed when hwpoisoned hugetlb is
unpoisoned. And unpoison handler needs to know how many errors there are
in the target hugepage. So add them.
HPageVmemmapOptimized(hpage) and HPageRawHwpUnreliable(hpage)) sometimes
can't be unpoisoned, so skip them.
Link: https://lkml.kernel.org/r/20220714042420.1847125-5-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When handling memory error on a hugetlb page, the error handler tries to
dissolve and turn it into 4kB pages. If it's successfully dissolved,
PageHWPoison flag is moved to the raw error page, so that's all right.
However, dissolve sometimes fails, then the error page is left as
hwpoisoned hugepage. It's useful if we can retry to dissolve it to save
healthy pages, but that's not possible now because the information about
where the raw error pages is lost.
Use the private field of a few tail pages to keep that information. The
code path of shrinking hugepage pool uses this info to try delayed
dissolve. In order to remember multiple errors in a hugepage, a
singly-linked list originated from SUBPAGE_INDEX_HWPOISON-th tail page is
constructed. Only simple operations (adding an entry or clearing all) are
required and the list is assumed not to be very long, so this simple data
structure should be enough.
If we failed to save raw error info, the hwpoison hugepage has errors on
unknown subpage, then this new saving mechanism does not work any more, so
disable saving new raw error info and freeing hwpoison hugepages.
Link: https://lkml.kernel.org/r/20220714042420.1847125-4-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
