| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time around.
New drivers:
- New driver for Renesas R8A779H0 also known as R-Car V4M.
- New driver for the Awinic AW9523/B I2C GPIO expander. I found this
living out-of-tree in OpenWrt as an upstream attempt had stalled on
the finishing line, so I picked it up and finished the job.
Improvements:
- The Nomadik pin control driver was for years re-used out of tree
for the ST STA chips, and now the IP was re-used in a MIPS
automotive SoC called MobilEyeq5, so it has been split in pin
control and GPIO drivers so the latter can be reused by MobilEyeq5.
(Along with a long list of cleanups)
- A lot of overall cleanup and tidying up"
* tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (87 commits)
drivers/gpio/nomadik: move dummy nmk_gpio_dbg_show_one() to header
gpio: nomadik: remove BUG_ON() in nmk_gpio_populate_chip()
dt-bindings: pinctrl: qcom: update compatible name for match with driver
pinctrl: aw9523: Make the driver tristate
pinctrl: nomadik: fix dereference of error pointer
gpio: nomadik: Back out some managed resources
pinctrl: aw9523: Add proper terminator
pinctrl: core: comment that pinctrl_add_gpio_range() is deprecated
pinctrl: pinmux: Suppress error message for -EPROBE_DEFER
pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander
dt-bindings: pinctrl: Add bindings for Awinic AW9523/AW9523B
gpio: nomadik: Finish conversion to use firmware node APIs
gpio: nomadik: fix Kconfig dependencies inbetween pinctrl & GPIO
pinctrl: da9062: Add OF table
dt-bindings: pinctrl: at91: add sam9x7
pinctrl: ocelot: remove redundant assignment to variable ret
gpio: nomadik: grab optional reset control and deassert it at probe
gpio: nomadik: support mobileye,eyeq5-gpio
gpio: nomadik: handle variadic GPIO count
gpio: nomadik: support shared GPIO IRQs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"New features:
- axp20x_usb_power: report USB type
Cleanups:
- convert lots of drivers to use devm_power_supply_register()
- convert lots of reset drivers to use devm_register_sys_off_handler()
- constify device_type and power_supply_class
- axp20x_usb_power: use correct property to report input current limit
- mm8013: correct handling of "not charging" status register
- core: fix charge_behaviour formatting
- minor fixes cleanups"
* tag 'for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (66 commits)
power: supply: core: fix charge_behaviour formatting
power: supply: core: ease special formatting implementations
power: supply: mm8013: fix "not charging" detection
power: supply: move power_supply_attr_groups definition back to sysfs
power: supply: core: simplify power_supply_class_init
power: supply: core: add power_supply_for_each_device()
power: supply: core: make power_supply_class constant
power: supply: bq2415x_charger: report online status
power: supply: core: move power_supply_attr_group into #ifdef block
power: supply: core: Fix power_supply_init_attrs() stub
power: supply: bq27xxx: Report charge full state correctly
power: reset: rmobile-reset: Make sysc_base2 local
power: supply: core: constify the struct device_type usage
power: supply: axp288_fuel_gauge: Deny ROCK Pi X
power: reset: rmobile-reset: Map correct MMIO resource
power: reset: xgene-reboot: Fix a NULL vs IS_ERR() test
power: supply: axp288_fuel_gauge: Add STCK1A* Intel Compute Sticks to the deny-list
power: reset: syscon-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
power: reset: syscon-poweroff: Move device data into a struct
power: reset: restart-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- support for the following Bluetooth devices from Samsung: Samsung
wireless {Keyboard, GamePad, Action Mouse, Book Cover, Universal
Keyboard, HOGP Keyboard} (Sandeep C S)
- second version of code for applying proper quirk depending on
firmware version for lenovo/cptkbd (Mikhail Khvainitski)
- lenovo/cptkbd firmware-dependent quirk (Mikhail Khvainitski)
- assorted fixes and optimizations for amd-sfh (Basavaraj Natikar)
- dead code and dead data structures removal (Jiri Slaby, Jiapeng
Chong)
* tag 'hid-for-linus-2024031301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (25 commits)
HID: amd_sfh: Set the AMD SFH driver to depend on x86
HID: input: avoid polling stylus battery on Chromebook Pompom
HID: amd_sfh: Extend MP2 register access to SFH
HID: amd_sfh: Improve boot time when SFH is available
HID: amd_sfh: Avoid disabling the interrupt
HID: amd_sfh: Update HPD sensor structure elements
HID: amd_sfh: Increase sensor command timeout
HID: intel-ish-hid: ipc: Add Arrow Lake PCI device ID
HID: nintendo: Remove some unused functions
HID: hid-prodikeys: remove struct pk_device
HID: hid-prodikeys: remove unused struct pcmidi_snd members
HID: hid-multitouch: remove unused mt_application::dev_time
HID: hid-lg3ff: remove unused struct lg3ff_device
HID: protect hid_device::bpf by CONFIG_HID_BPF
HID: wacom: remove unused hid_data::pressure
HID: apple: remove unused members from struct apple_sc_backlight
HID: wacom: Clean up use of struct->wacom_wac
HID: samsung: Add Samsung wireless bookcover and universal keyboard support
HID: samsung: Add Samsung wireless action mouse support
HID: samsung: Add Samsung wireless gamepad support
...
|
|
Change the size parameters in lsm_list_modules(), lsm_set_self_attr()
and lsm_get_self_attr() from size_t to u32. This avoids the need to
have different interfaces for 32 and 64 bit systems.
Cc: stable@vger.kernel.org
Fixes: a04a1198088a ("LSM: syscalls for current process attributes")
Fixes: ad4aff9ec25f ("LSM: Create lsm_list_modules system call")
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reported-and-reviewed-by: Dmitry V. Levin <ldv@strace.io>
[PM: subject and metadata tweaks, syscall.h fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
While the commit d807ad80d811 ("drm/bridge: add ->edid_read hook and
drm_bridge_edid_read()") and the commit 27b8f91c08d9 ("drm/bridge:
remove ->get_edid callback") replaced ->get_edid() callback with the
->edid_read(), they failed to update documentation. Fix the drm_bridge
docs to point to edid_read().
Fixes: 27b8f91c08d9 ("drm/bridge: remove ->get_edid callback")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240310-drm-bridge-fix-docs-v1-1-70d3d741cb7a@linaro.org
|
|
Pull drm updates from Dave Airlie:
"Highlights are usual, more AMD IP blocks for future hw, i915/xe
changes, Displayport tunnelling support for i915, msm YUV over DP
changes, new tests for ttm, but its mostly a lot of stuff all over the
place from lots of people.
core:
- EDID cleanups
- scheduler error handling fixes
- managed: add drmm_release_action() with tests
- add ratelimited drm debug print
- DPCD PSR early transport macro
- DP tunneling and bandwidth allocation helpers
- remove built-in edids
- dp: Avoid AUX transfers on powered-down displays
- dp: Add VSC SDP helpers
cross drivers:
- use new drm print helpers
- switch to ->read_edid callback
- gem: add stats for shared buffers plus updates to amdgpu, i915, xe
syncobj:
- fixes to waiting and sleeping
ttm:
- add tests
- fix errno codes
- simply busy-placement handling
- fix page decryption
media:
- tc358743: fix v4l device registration
video:
- move all kernel parameters for video behind CONFIG_VIDEO
sound:
- remove <drm/drm_edid.h> include from header
ci:
- add tests for msm
- fix apq8016 runner
efifb:
- use copy of global screen_info state
vesafb:
- use copy of global screen_info state
simplefb:
- fix logging
bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- samsung-dsim: add bsh-smm-s2/pro boards
- tc358767: fix regmap usage
- imx: add i.MX8MP HDMI PVI plus DT bindings
- imx: add i.MX8MP HDMI TX plus DT bindings
- sii902x: fix probing and unregistration
- tc358767: limit pixel PLL input range
- switch to new drm_bridge_read_edid() interface
panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync
in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
- add BOE TH101MB31IG002-28A plus DT bindings
- add EDT ETML1010G3DRA plus DT bindings
- add Novatek NT36672E LCD DSI plus DT bindings
- nt36523: support 120Hz timings, fix includes
- simple: fix display timings on RK32FN48H
- visionox-vtdr6130: fix initialization
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
panel-orientation-quirks:
- GPD Win Mini
amdgpu:
- Validate DMABuf imports in compute VMs
- Add RAS ACA framework
- PSP 13 fixes
- Misc code cleanups
- Replay fixes
- Atom interpretor PS, WS bounds checking
- DML2 fixes
- Audio fixes
- DCN 3.5 Z state fixes
- Remove deprecated ida_simple usage
- UBSAN fixes
- RAS fixes
- Enable seq64 infrastructure
- DC color block enablement
- Documentation updates
- DC documentation updates
- DMCUB updates
- ATHUB 4.1 support
- LSDMA 7.0 support
- JPEG DPG support
- IH 7.0 support
- HDP 7.0 support
- VCN 5.0 support
- SMU 13.0.6 updates
- NBIO 7.11 updates
- SDMA 6.1 updates
- MMHUB 3.3 updates
- DCN 3.5.1 support
- NBIF 6.3.1 support
- VPE 6.1.1 support
amdkfd:
- Validate DMABuf imports in compute VMs
- SVM fixes
- Trap handler updates and enhancements
- Fix cache size reporting
- Relocate the trap handler
radeon:
- Atom interpretor PS, WS bounds checking
- Misc code cleanups
xe:
- new query for GuC submission version
- Remove unused persistent exec_queues
- Add vram frequency sysfs attributes
- Add the flag XE_VM_BIND_FLAG_DUMPABLE
- Drop pre-production workarounds
- Drop kunit tests for unsupported platforms
- Start pumbling SR-IOV support with memory based interrupts for VF
- Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
to work with memory based interrupts
- Add GuC Doorbells Manager as prep work SR-IOV
- Implement additional workarounds for xe2 and MTL
- Program a few registers according to perfomance guide spec for Xe2
- Fix remaining 32b build issues and enable it back
- Fix build with CONFIG_DEBUG_FS=n
- Fix warnings from GuC ABI headers
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
- Release mmap mappings on rpm suspend
- Disable mid-thread preemption when not properly supported by
hardware
- Fix xe_exec by reserving extra fence slot for CPU bind
- Fix xe_exec with full long running exec queue
- Canonicalize addresses where needed for Xe2 and add to devcoredum
- Toggle USM support for Xe2
- Only allow 1 ufence per exec / bind IOCTL
- Add GuC firmware loading for Lunar Lake
- Add XE_VMA_PTE_64K VMA flag
i915:
- Add more ADL-N PCI IDs
- Enable fastboot also on older platforms
- Early transport for panel replay and PSR
- New ARL PCI IDs
- DP TPS4 PHY test pattern support
- Unify and improve VSC SDP for PSR and non-PSR cases
- Refactor memory regions and improve debug logging
- Rework global state serialization
- Remove unused CDCLK divider fields
- Unify HDCP connector logging format
- Use display instead of graphics version in display code
- Move VBT and opregion debugfs next to the implementation
- Abstract opregion interface, use opaque type
- MTL fixes
- HPD handling fixes
- Add GuC submission interface version query
- Atomically invalidate userptr on mmu-notifier
- Update handling of MMIO triggered reports
- Don't make assumptions about intel_wakeref_t type
- Extend driver code of Xe_LPG to Xe_LPG+
- Add flex arrays to struct i915_syncmap
- Allow for very slow HuC loading
- DP tunneling and bandwidth allocation support
msm:
- Correct bindings for MSM8976 and SM8650 platforms
- Start migration of MDP5 platforms to DPU driver
- X1E80100 MDSS support
- DPU:
- Improve DSC allocation, fixing several important corner cases
- Add support for SDM630/SDM660 platforms
- Simplify dpu_encoder_phys_ops
- Apply fixes targeting DSC support with a single DSC encoder
- Apply fixes for HCTL_EN timing configuration
- X1E80100 support
- Add support for YUV420 over DP
- GPU:
- fix sc7180 UBWC config
- fix a7xx LLC config
- new gpu support: a305B, a750, a702
- machine support: SM7150 (different power levels than other a618)
- a7xx devcoredump support
habanalabs:
- configure IRQ affinity according to NUMA node
- move HBM MMU page tables inside the HBM
- improve device reset
- check extended PCIe errors
ivpu:
- updates to firmware API
- refactor BO allocation
imx:
- use devm_ functions during init
hisilicon:
- fix EDID includes
mgag200:
- improve ioremap usage
- convert to struct drm_edid
- Work around PCI write bursts
nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes
qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations
rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes
ssd130x:
- support SSD133x plus DT bindings
tegra:
- fix error handling
tilcdc:
- make use of DRM managed release
v3d:
- show memory stats in debugfs
- Support display MMU page size
vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers
virtio:
- add venus capset defines
vkms:
- fix OOB access when programming the LUT
- Kconfig improvements
vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes
- list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
- fix null-pointer deref in execbuf
- refactor display-mode probing
- fix fencing for creating cursor MOBs
- fix cursor-memory lifetime
xlnx:
- fix live video input for ZynqMP DPSUB
lima:
- fix memory leak
loongson:
- fail if no VRAM present
meson:
- switch to new drm_bridge_read_edid() interface
renesas:
- add RZ/G2L DU support plus DT bindings
mxsfb:
- Use managed mode config
sun4i:
- HDMI: updates to atomic mode setting
mediatek:
- Add display driver for MT8188 VDOSYS1
- DSI driver cleanups
- Filter modes according to hardware capability
- Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
etnaviv:
- enhancements for NPU and MRT support"
* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
drm/amd/pm: wait for completion of the EnableGfxImu message
drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
drm/amdgpu: add smu 14.0.1 support
drm/amdgpu: add VPE 6.1.1 discovery support
drm/amdgpu/vpe: add VPE 6.1.1 support
drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
drm/amdgpu/vpe: add collaborate mode support for VPE
drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
drm/amdgpu/vpe: add multi instance VPE support
drm/amdgpu/discovery: add nbif v6_3_1 ip block
drm/amdgpu: Add nbif v6_3_1 ip block support
drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
arch/powerpc: Remove <linux/fb.h> from backlight code
macintosh/via-pmu-backlight: Include <linux/backlight.h>
fbdev/chipsfb: Include <linux/backlight.h>
drm/etnaviv: Restore some id values
drm/amdkfd: make kfd_class constant
drm/amdgpu: add ring timeout information in devcoredump
...
|
|
this code originally used the page allocator directly, but most code
shouldn't do that - PAGE_SIZE varies with architecture, and slab is
faster.
4k is also on the large side for typical usage, 512 bytes is a better
choice for typical usage that might be somewhat sparse.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Rename and export __file_remove_privs(); for a buffered write path that
doesn't take the inode lock we need to be able to check if the operation
needs to do work first.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
|
|
handling
To avoid issues with out of order cleanup, or ambiguity about when the
auto freed data is first instantiated, do it within the for loop definition.
The disadvantage is that the struct device_node *child variable creation
is not immediately obvious where this is used.
However, in many cases, if there is another definition of
struct device_node *child; the compiler / static analysers will notify us
that it is unused, or uninitialized.
Note that, in the vast majority of cases, the _available_ form should be
used and as code is converted to these scoped handers, we should confirm
that any cases that do not check for available have a good reason not
to.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240225142714.286440-3-jic23@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The recent addition of scope based cleanup support to the kernel
provides a convenient tool to reduce the chances of leaking reference
counts where of_node_put() should have been called in an error path.
This enables
struct device_node *child __free(device_node) = NULL;
for_each_child_of_node(np, child) {
if (test)
return test;
}
with no need for a manual call of of_node_put().
A following patch will reduce the scope of the child variable to the
for loop, to avoid an issues with ordering of autocleanup, and make it
obvious when this assigned a non NULL value.
In this simple example the gains are small but there are some very
complex error handling cases buried in these loops that will be
greatly simplified by enabling early returns with out the need
for this manual of_node_put() call.
Note that there are coccinelle checks in
scripts/coccinelle/iterators/for_each_child.cocci to detect a failure
to call of_node_put(). This new approach does not cause false positives.
Longer term we may want to add scripting to check this new approach is
done correctly with no double of_node_put() calls being introduced due
to the auto cleanup. It may also be useful to script finding places
this new approach is useful.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240225142714.286440-2-jic23@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add mempool_init_kvmalloc_pool() and mempool_create_kvmalloc_pool(),
which wrap kvmalloc() instead of kmalloc() - kmalloc() with a vmalloc()
fallback.
This is part of a bcachefs cleanup - dropping an internal kvpmalloc()
helper (which predates kvmalloc()) along with mempool helpers; this
replaces the bcachefs-private kvpmalloc_pool.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: linux-mm@kvack.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, isofs, udf, and quota updates from Jan Kara:
"A lot of material this time:
- removal of a lot of GFP_NOFS usage from ext2, udf, quota (either it
was legacy or replaced with scoped memalloc_nofs_*() API)
- removal of BUG_ONs in quota code
- conversion of UDF to the new mount API
- tightening quota on disk format verification
- fix some potentially unsafe use of RCU pointers in quota code and
annotate everything properly to make sparse happy
- a few other small quota, ext2, udf, and isofs fixes"
* tag 'fs_for_v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (26 commits)
udf: remove SLAB_MEM_SPREAD flag usage
quota: remove SLAB_MEM_SPREAD flag usage
isofs: remove SLAB_MEM_SPREAD flag usage
ext2: remove SLAB_MEM_SPREAD flag usage
ext2: mark as deprecated
udf: convert to new mount API
udf: convert novrs to an option flag
MAINTAINERS: add missing git address for ext2 entry
quota: Detect loops in quota tree
quota: Properly annotate i_dquot arrays with __rcu
quota: Fix rcu annotations of inode dquot pointers
isofs: handle CDs with bad root inode but good Joliet root directory
udf: Avoid invalid LVID used on mount
quota: Fix potential NULL pointer dereference
quota: Drop GFP_NOFS instances under dquot->dq_lock and dqio_sem
quota: Set nofs allocation context when acquiring dqio_sem
ext2: Remove GFP_NOFS use in ext2_xattr_cache_insert()
ext2: Drop GFP_NOFS use in ext2_get_blocks()
ext2: Drop GFP_NOFS allocation from ext2_init_block_alloc_info()
udf: Remove GFP_NOFS allocation in udf_expand_file_adinicb()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
- fsnotify optimizations to reduce cost of fsnotify when nobody is
watching
- fix longstanding wart that system could not be suspended when some
process was waiting for response to fanotify permission event
- some spelling fixes
* tag 'fsnotify_for_v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: allow freeze when waiting response for permission events
fanotify: Fix misspelling of "writable"
fsnotify: Fix misspelling of "writable"
inotify: Fix misspelling of "writable"
fsnotify: Add fsnotify_sb_has_watchers() helper
fsnotify: optimize the case of no parent watcher
|
|
Pull xfs updates from Chandan Babu:
- Online repair updates:
- More ondisk structures being repaired:
- Inode's mode field by trying to obtain file type value from
the a directory entry
- Quota counters
- Link counts of inodes
- FS summary counters
- Support for in-memory btrees has been added to support repair
of rmap btrees
- Misc changes:
- Report corruption of metadata to the health tracking subsystem
- Enable indirect health reporting when resources are scarce
- Reduce memory usage while repairing refcount btree
- Extend "Bmap update" intent item to support atomic extent
swapping on the realtime device
- Extend "Bmap update" intent item to support extended attribute
fork and unwritten extents
- Code cleanups:
- Bmap log intent
- Btree block pointer checking
- Btree readahead
- Buffer target
- Symbolic link code
- Remove mrlock wrapper around the rwsem
- Convert all the GFP_NOFS flag usages to use the scoped
memalloc_nofs_save() API instead of direct calls with the GFP_NOFS
- Refactor and simplify xfile abstraction. Lower level APIs in shmem.c
are required to be exported in order to achieve this
- Skip checking alignment constraints for inode chunk allocations when
block size is larger than inode chunk size
- Do not submit delwri buffers collected during log recovery when an
error has been encountered
- Fix SEEK_HOLE/DATA for file regions which have active COW extents
- Fix lock order inversion when executing error handling path during
shrinking a filesystem
- Remove duplicate ifdefs
* tag 'xfs-6.9-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (183 commits)
xfs: shrink failure needs to hold AGI buffer
mm/shmem.c: Use new form of *@param in kernel-doc
kernel-doc: Add unary operator * to $type_param_ref
xfs: use kvfree() in xlog_cil_free_logvec()
xfs: xfs_btree_bload_prep_block() should use __GFP_NOFAIL
xfs: fix scrub stats file permissions
xfs: fix log recovery erroring out on refcount recovery failure
xfs: move symlink target write function to libxfs
xfs: move remote symlink target read function to libxfs
xfs: move xfs_symlink_remote.c declarations to xfs_symlink_remote.h
xfs: xfs_bmap_finish_one should map unwritten extents properly
xfs: support deferred bmap updates on the attr fork
xfs: support recovering bmap intent items targetting realtime extents
xfs: add a realtime flag to the bmap update log redo items
xfs: add a xattr_entry helper
xfs: fix xfs_bunmapi to allow unmapping of partial rt extents
xfs: move xfs_bmap_defer_add to xfs_bmap_item.c
xfs: reuse xfs_bmap_update_cancel_item
xfs: add a bi_entry helper
xfs: remove xfs_trans_set_bmap_flags
...
|
|
- removal of unused data structures all over the place (Jiri Slaby)
|
|
As Linus suggested this enables pidfs unconditionally. A key property to
retain is the ability to compare pidfds by inode number (cf. [1]).
That's extremely helpful just as comparing namespace file descriptors by
inode number is. They are used in a variety of scenarios where they need
to be compared, e.g., when receiving a pidfd via SO_PEERPIDFD from a
socket to trivially authenticate a the sender and various other
use-cases.
For 64bit systems this is pretty trivial to do. For 32bit it's slightly
more annoying as we discussed but we simply add a dumb ida based
allocator that gets used on 32bit. This gives the same guarantees about
inode numbers on 64bit without any overflow risk. Practically, we'll
never run into overflow issues because we're constrained by the number
of processes that can exist on 32bit and by the number of open files
that can exist on a 32bit system. On 64bit none of this matters and
things are very simple.
If 32bit also needs the uniqueness guarantee they can simply parse the
contents of /proc/<pid>/fd/<nr>. The uniqueness guarantees have a
variety of use-cases. One of the most obvious ones is that they will
make pidfiles (or "pidfdfiles", I guess) reliable as the unique
identifier can be placed into there that won't be reycled. Also a
frequent request.
Note, I took the chance and simplified path_from_stashed() even further.
Instead of passing the inode number explicitly to path_from_stashed() we
let the filesystem handle that internally. So path_from_stashed() ends
up even simpler than it is now. This is also a good solution allowing
the cleanup code to be clean and consistent between 32bit and 64bit. The
cleanup path in prepare_anon_dentry() is also switched around so we put
the inode before the dentry allocation. This means we only have to call
the cleanup handler for the filesystem's inode data once and can rely
->evict_inode() otherwise.
Aside from having to have a bit of extra code for 32bit it actually ends
up a nice cleanup for path_from_stashed() imho.
Tested on both 32 and 64bit including error injection.
Link: https://github.com/systemd/systemd/pull/31713 [1]
Link: https://lore.kernel.org/r/20240312-dingo-sehnlich-b3ecc35c6de7@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Christophe Leroy did most of the work on this release, first with a
few cleanups on CONFIG_STRICT_KERNEL_RWX and ending with error
handling for when set_memory_XX() can fail.
This is part of a larger effort to clean up all these callers which
can fail, modules is just part of it"
* tag 'modules-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Don't ignore errors from set_memory_XX()
lib/test_kmod: fix kernel-doc warnings
powerpc: Simplify strict_kernel_rwx_enabled()
modules: Remove #ifdef CONFIG_STRICT_MODULE_RWX around rodata_enabled
init: Declare rodata_enabled and mark_rodata_ro() at all time
module: Change module_enable_{nx/x/ro}() to more explicit names
module: Use set_memory_rox()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Measure initrd and command line using the CC protocol if the ordinary
TCG2 protocol is not implemented, typically on TDX confidential VMs
- Avoid creating mappings that are both writable and executable while
running in the EFI boot services. This is a prerequisite for getting
the x86 shim loader signed by MicroSoft again, which allows the
distros to install on x86 PCs that ship with EFI secure boot enabled.
- API update for struct platform_driver::remove()
* tag 'efi-next-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
virt: efi_secret: Convert to platform remove callback returning void
x86/efistub: Remap kernel text read-only before dropping NX attribute
efi/libstub: Add get_event_log() support for CC platforms
efi/libstub: Measure into CC protocol if TCG2 protocol is absent
efi/libstub: Add Confidential Computing (CC) measurement typedefs
efi/tpm: Use symbolic GUID name from spec for final events table
efi/libstub: Use TPM event typedefs from the TCG PC Client spec
|
|
'clk-rate-exclusive' into clk-next
- Increase dev_id len for clkdev lookups
* clk-samsung: (25 commits)
clk: samsung: Add CPU clock support for Exynos850
clk: samsung: Pass mask to wait_until_mux_stable()
clk: samsung: Keep register offsets in chip specific structure
clk: samsung: Keep CPU clock chip specific data in a dedicated struct
clk: samsung: Pass register layout type explicitly to CLK_CPU()
clk: samsung: Pass actual CPU clock registers base to CPU_CLK()
clk: samsung: Group CPU clock functions by chip
clk: samsung: Use single CPU clock notifier callback for all chips
clk: samsung: Reduce params count in exynos_register_cpu_clock()
clk: samsung: Pull struct exynos_cpuclk into clk-cpu.c
clk: samsung: Improve clk-cpu.c style
dt-bindings: clock: exynos850: Add CMU_CPUCLK0 and CMU_CPUCL1
clk: samsung: gs101: add support for cmu_peric1
clk: samsung: gs101: drop extra empty line
dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit
clk: samsung: exynos850: Propagate SPI IPCLK rate change
clk: samsung: gs101: gpio_peric0_pclk needs to be kept on
clk: samsung: exynos850: Add PDMA clocks
dt-bindings: clock: tesla,fsd: Fix spelling mistake
clk: samsung: gs101: add support for cmu_peric0
...
* clk-imx:
clk: imx: imx8mp: Fix SAI_MCLK_SEL definition
clk: imx: scu: Use common error handling code in imx_clk_scu_alloc_dev()
clk: imx: composite-8m: Delete two unnecessary initialisations in __imx8m_clk_hw_composite()
clk: imx: composite-8m: Less function calls in __imx8m_clk_hw_composite() after error detection
* clk-rockchip:
clk: rockchip: rk3399: Allow to set rate of clk_i2s0_frac's parent
clk: rockchip: rk3588: use linked clock ID for GATE_LINK
clk: rockchip: rk3588: fix indent
clk: rockchip: rk3588: fix pclk_vo0grf and pclk_vo1grf
dt-bindings: clock: rk3588: add missing PCLK_VO1GRF
dt-bindings: clock: rk3588: drop CLK_NR_CLKS
clk: rockchip: rk3588: fix CLK_NR_CLKS usage
clk: rockchip: rk3568: Add PLL rate for 128MHz
* clk-clkdev:
clkdev: Update clkdev id usage to allow for longer names
* clk-rate-exclusive:
clk: Add a devm variant of clk_rate_exclusive_get()
|
|
'clk-microchip' into clk-next
* clk-remove:
clk: starfive: jh7110-vout: Convert to platform remove callback returning void
clk: starfive: jh7110-isp: Convert to platform remove callback returning void
clk: imx: imx8-acm: Convert to platform remove callback returning void
* clk-amlogic:
clk: meson: Add missing clocks to axg_clk_regmaps
* clk-qcom: (62 commits)
clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times
dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller
clk: qcom: drop the SC7180 Modem subsystem clock driver
clk: qcom: Use qcom_branch_set_clk_en()
clk: qcom: branch: Add a helper for setting the enable bit
clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const
clk: qcom: gcc-sc8180x: Add missing UFS QREF clocks
clk: qcom: gcc-msm8953: add more resets
clk: qcom: videocc-*: switch to module_platform_driver
...
* clk-parent:
clk: Fix clk_core_get NULL dereference
* clk-microchip:
clk: microchip: mpfs: convert MSSPLL outputs to clk_divider
clk: microchip: mpfs: add missing MSSPLL outputs
clk: microchip: mpfs: setup for using other mss pll outputs
clk: microchip: mpfs: split MSSPLL in two
dt-bindings: can: mpfs: add missing required clock
dt-bindings: clock: mpfs: add more MSSPLL output definitions
|
|
'clk-allwinner' into clk-next
* clk-aspeed:
clk: ast2600: Add FSI parent clock with correct rate
dt-bindings: clock: ast2600: Add FSI clock
* clk-keystone:
clk: keystone: sci-clk: Adding support for non contiguous clocks
* clk-mobileye:
dt-bindings: reset: mobileye,eyeq5-reset: add bindings
dt-bindings: clock: mobileye,eyeq5-clk: add bindings
clk: fixed-factor: add fwname-based constructor functions
clk: fixed-factor: add optional accuracy support
* clk-allwinner:
clk: sunxi: usb: fix kernel-doc warnings
clk: sunxi: sun9i-cpus: fix kernel-doc warnings
clk: sunxi: a20-gmac: fix kernel-doc warnings
|
|
and 'clk-bulk' into clk-next
- Add a devm_clk_bulk_get_all_enable() API to get and enable all clks
for a device
- Fix some static checker errors in the hisilicon clk driver
* clk-renesas: (25 commits)
clk: renesas: r8a779h0: Add RPC-IF clock
clk: renesas: r8a779h0: Add SYS-DMAC clocks
clk: renesas: r8a779h0: Add SDHI clock
clk: renesas: r8a779h0: Add EtherAVB clocks
clk: renesas: r9a07g04[34]: Fix typo for sel_shdi variable
clk: renesas: r9a07g04[34]: Use SEL_SDHI1_STS status configuration for SD1 mux
clk: renesas: r8a779f0: Correct PFC/GPIO parent clock
clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks
clk: renesas: r8a779h0: Add I2C clocks
clk: renesas: r8a779h0: Add watchdog clock
clk: renesas: r8a779h0: Add PFC/GPIO clocks
clk: renesas: r8a779g0: Fix PCIe clock name
clk: renesas: cpg-mssr: Add support for R-Car V4M
clk: renesas: rcar-gen4: Add support for FRQCRC1
clk: renesas: r9a07g043: Add clock and reset entries for CRU
clk: renesas: r9a08g045: Add clock and reset support for watchdog
dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
dt-bindings: power: Add r8a779h0 SYSC power domain definitions
dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
...
* clk-cleanup:
clk: zynq: Prevent null pointer dereference caused by kmalloc failure
clk: fractional-divider: Use bit operations consistently
clk: fractional-divider: Move mask calculations out of lock
clk: ti: dpll3xxx: use correct function names in kernel-doc
clk: clocking-wizard: Remove redundant initialization of pointer div_addr
clk: keystone: sci-clk: match func name comment to actual
clk: cdce925: Remove redundant assignment to variable 'rate'
MAINTAINERS: drop Sekhar Nori
* clk-hisilicon:
clk: hisilicon: Use devm_kcalloc() instead of devm_kzalloc()
clk: hisilicon: hi3559a: Fix an erroneous devm_kfree()
clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister()
* clk-mediatek:
clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()
clk: mediatek: add infracfg reset controller for mt7988
dt-bindings: reset: mediatek: add MT7988 infracfg reset IDs
dt-bindings: clock: mediatek: convert SSUSBSYS to the json-schema clock
dt-bindings: clock: mediatek: convert PCIESYS to the json-schema clock
dt-bindings: clock: mediatek: convert hifsys to the json-schema clock
clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical
clk: mediatek: mt8183: Correct parent of CLK_INFRA_SSPM_32K_SELF
clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe()
clk: mediatek: mt8135: Fix an error handling path in clk_mt8135_apmixed_probe()
* clk-bulk:
clk: Provide managed helper to get and enable bulk clocks
|
|
acomp's users might want to know if acomp is really async to optimize
themselves. One typical user which can benefit from exposed async stat is
zswap.
In zswap, zsmalloc is the most commonly used allocator for (and perhaps
the only one). For zsmalloc, we cannot sleep while we map the compressed
memory, so we copy it to a temporary buffer. By knowing the alg won't
sleep can help zswap to avoid the need for a buffer. This shows
noticeable improvement in load/store latency of zswap.
Link: https://lkml.kernel.org/r/20240222081135.173040-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts one change in commit 924bd6a8c967 ("mm/x86: drop two
unnecessary pud_leaf() definitions").
One issue with that is it broke nopmd builds for at least both arm64 and
riscv (CONFIG_PGTABLE_LEVELS=2). The other issue is it was overlooked that
it's a common change rather than x86 specific (relevant to the commit
message of the commit).
Normally there's no need for empty definition of pXd_leaf() because of the
fallback functions, however this logic may not apply to pgtable-nopmd.h,
because that's a header that can even be used by arch *pgtable.h headers,
which can use the *_leaf() definitions _before_ the fallback functions are
defined. Leave it there to pass PGTABLE_LEVELS=2 builds.
Link: https://lkml.kernel.org/r/Ze8vFNV9YSdgC2S7@x1n
Fixes: 924bd6a8c967 ("mm/x86: drop two unnecessary pud_leaf() definitions")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403090900.OwPqmRuI-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202403101607.a42gaLOS-lkp@intel.com/
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These mostly change the thermal core in a few ways allowing thermal
drivers to be simplified, in particular in their removal and failing
probe handling parts that are notoriously prone to errors, and
propagate the changes to several drivers.
Apart from that, support for a new platform is added (Intel Lunar
Lake-M), some bugs are fixed and some code is cleaned up, as usual.
Specifics:
- Store zone trips table and zone operations directly in struct
thermal_zone_device (Rafael Wysocki)
- Fix up flex array initialization during thermal zone device
registration (Nathan Chancellor)
- Rework writable trip points handling in the thermal core and
several drivers (Rafael Wysocki)
- Thermal core code cleanups (Dan Carpenter, Flavio Suligoi)
- Use thermal zone accessor functions in the int340x Intel thermal
driver (Rafael Wysocki)
- Add Lunar Lake-M PCI ID to the int340x Intel thermal driver
(Srinivas Pandruvada)
- Minor fixes for thermal governors (Rafael Wysocki, Di Shen)
- Trip point handling fixes for the iwlwifi wireless driver (Rafael
Wysocki)
- Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno)"
* tag 'thermal-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
thermal: core: remove unnecessary check in trip_point_hyst_store()
thermal: intel: int340x_thermal: Use thermal zone accessor functions
thermal: core: Remove excess empty line from a comment
thermal: int340x: processor_thermal: Add Lunar Lake-M PCI ID
thermal: core: Eliminate writable trip points masks
thermal: of: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: imx: Set THERMAL_TRIP_FLAG_RW_TEMP directly
wifi: iwlwifi: mvm: Set THERMAL_TRIP_FLAG_RW_TEMP directly
mlxsw: core_thermal: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: intel: Set THERMAL_TRIP_FLAG_RW_TEMP directly
thermal: core: Drop the .set_trip_hyst() thermal zone operation
thermal: core: Add flags to struct thermal_trip
thermal: core: Move initial num_trips assignment before memcpy()
thermal: Get rid of CONFIG_THERMAL_WRITABLE_TRIPS
thermal: intel: Adjust ops handling during thermal zone registration
thermal: ACPI: Constify acpi_thermal_zone_ops
thermal: core: Store zone ops in struct thermal_zone_device
thermal: intel: Discard trip tables after zone registration
thermal: ACPI: Discard trips table after zone registration
thermal: core: Store zone trips table in struct thermal_zone_device
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These modify the ACPI device events and processor enumeration code to
take the 'enabled' _STA bit into account as mandated by the ACPI
specification, convert several platform drivers to using a remove
callback that returns void, add some new quirks for ACPI IRQ override
and other things, address assorted issues and clean up code.
Specifics:
- Rearrange Device Check and Bus Check notification handling in the
ACPI device hotplug code to make it get the "enabled" _STA bit into
account (Rafael Wysocki)
- Modify acpi_processor_add() to skip processors with the "enabled"
_STA bit clear, as per the specification (Rafael Wysocki)
- Stop failing Device Check notification handling without a valid
reason (Rafael Wysocki)
- Defer enumeration of devices that depend on a device with an ACPI
device ID equalt to INTC10CF to address probe ordering issues on
some platforms (Wentong Wu)
- Constify acpi_bus_type (Ricardo Marliere)
- Make the ACPI-specific suspend-to-idle code take the Low-Power S0
Idle MSFT UUID into account on non-AMD systems (Rafael Wysocki)
- Add ACPI IRQ override quirks for some new platforms (Sergey
Kalinichev, Maxim Kudinov, Alexey Froloff, Sviatoslav Harasymchuk,
Nicolas Haye)
- Make the NFIT parsing code use acpi_evaluate_dsm_typed() (Andy
Shevchenko)
- Fix a memory leak in acpi_processor_power_exit() (Armin Wolf)
- Make it possible to quirk the CSI-2 and MIPI DisCo for Imaging
properties parsing and add a quirk for Dell XPS 9315 (Sakari Ailus)
- Prevent false-positive static checker warnings from triggering by
intializing some variables in the ACPI thermal code to zero (Colin
Ian King)
- Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and
make that function generic (Hans de Goede)
- Make the ACPI backlight code handle fetching EDID that is longer
than 256 bytes (Mario Limonciello)
- Skip initialization of GHES_ASSIST structures for Machine Check
Architecture in APEI (Avadhut Naik)
- Convert several plaform drivers in the ACPI subsystem to using a
remove callback that returns void (Uwe Kleine-König)
- Drop the long-deprecated custom_method debugfs interface that is
problematic from the security standpoint (Rafael Wysocki)
- Use %pe in a couple of places in the ACPI code for easier error
decoding (Onkarnath)
- Fix register width information handling during system memory
accesses in the ACPI CPPC library (Jarred White)
- Add AMD CPPC V2 support for family 17h processors to the ACPI CPPC
library (Perry Yuan)"
* tag 'acpi-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
ACPI: resource: Use IRQ override on Maibenben X565
ACPI: CPPC: Use access_width over bit_width for system memory accesses
ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors
ACPI: APEI: Skip initialization of GHES_ASSIST structures for Machine Check Architecture
ACPI: scan: Consolidate Device Check and Bus Check notification handling
ACPI: scan: Rework Device Check and Bus Check notification handling
ACPI: scan: Make acpi_processor_add() check the device enabled bit
ACPI: scan: Relocate acpi_bus_trim_one()
ACPI: scan: Fix device check notification handling
ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override
ACPI: pfr_update: Convert to platform remove callback returning void
ACPI: pfr_telemetry: Convert to platform remove callback returning void
ACPI: fan: Convert to platform remove callback returning void
ACPI: GED: Convert to platform remove callback returning void
ACPI: DPTF: Convert to platform remove callback returning void
ACPI: AGDI: Convert to platform remove callback returning void
ACPI: TAD: Convert to platform remove callback returning void
ACPI: APEI: GHES: Convert to platform remove callback returning void
ACPI: property: Polish ignoring bad data nodes
ACPI: thermal_lib: Initialize temp_decik to zero
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"From the functional perspective, the most significant change here is
the addition of support for Energy Models that can be updated
dynamically at run time.
There is also the addition of LZ4 compression support for hibernation,
the new preferred core support in amd-pstate, new platforms support in
the Intel RAPL driver, new model-specific EPP handling in intel_pstate
and more.
Apart from that, the cpufreq default transition delay is reduced from
10 ms to 2 ms (along with some related adjustments), the system
suspend statistics code undergoes a significant rework and there is a
usual bunch of fixes and code cleanups all over.
Specifics:
- Allow the Energy Model to be updated dynamically (Lukasz Luba)
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V)
- Fix and clean up system suspend statistics collection (Rafael
Wysocki)
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki)
- Fix PCI hibernation support description (Yiwei Lin)
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy)
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah)
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li)
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus)
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat)
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin)
- Enable preferred core support in the amd-pstate cpufreq driver
(Meng Li)
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li)
- Allow intel_pstate to assign model-specific values to strings used
in the EPP sysfs interface and make it do so on Meteor Lake
(Srinivas Pandruvada)
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby)
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar)
- Change default transition delay in cpufreq to 2ms (Qais Yousef)
- Remove references to 10ms minimum sampling rate from comments in
the cpufreq code (Pierre Gondois)
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef)
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova)
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois)
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle)
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng)
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang)
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano)
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda)
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)
- Fix a couple of warnings in the OPP core code related to W=1 builds
(Viresh Kumar)
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar)
- Extend dev_pm_opp_data with turbo support (Sibi Sankar)
- dt-bindings: drop maxItems from inner items (David Heidelberg)"
* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
dt-bindings: opp: drop maxItems from inner items
OPP: debugfs: Fix warning around icc_get_name()
OPP: debugfs: Fix warning with W=1 builds
cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
OPP: Extend dev_pm_opp_data with turbo support
Fix cpupower-frequency-info.1 man page typo
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
PM: sleep: wakeirq: fix wake irq warning in system suspend
powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
cpufreq: Don't unregister cpufreq cooling on CPU hotplug
PM: suspend: Set mem_sleep_current during kernel command line setup
cpufreq: Honour transition_latency over transition_delay_us
cpufreq: Limit resolving a frequency to policy min/max
Documentation: PM: Fix runtime_pm.rst markdown syntax
cpufreq: amd-pstate: adjust min/max limit perf
cpufreq: Remove references to 10ms min sampling rate
cpufreq: intel_pstate: Update default EPPs for Meteor Lake
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"Core:
- Log a message when unused PM domains gets disabled
- Scale down parent/child performance states in the reverse order
Providers:
- qcom: rpmpd: Add power domains support for MSM8974, MSM8974PRO,
PMA8084 and PM8841
- renesas: rcar-gen4-sysc: Reduce atomic delays
- renesas: rcar-sysc: Adjust the waiting time to cover the worst case
- renesas: r8a779h0-sysc: Add support for the r8a779h0 PM domains
- imx: imx8mp-blk-ctrl: Add the fdcc clock to the hdmimix domains
- imx: imx8mp-blk-ctrl: Error out if domains are missing in DT
Improve support for multiple PM domains:
- Add two helper functions to attach/detach multiple PM domains
- Convert a couple of drivers to use the new helper functions"
* tag 'pmdomain-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (22 commits)
pmdomain: renesas: rcar-gen4-sysc: Reduce atomic delays
pmdomain: renesas: Adjust the waiting time to cover the worst case
pmdomain: qcom: rpmpd: Add MSM8974PRO+PMA8084 power domains
pmdomain: qcom: rpmpd: Add MSM8974+PM8841 power domains
pmdomain: core: constify of_phandle_args in add device and subdomain
pmdomain: core: constify of_phandle_args in xlate
media: venus: Convert to dev_pm_domain_attach|detach_list() for vcodec
remoteproc: qcom_q6v5_adsp: Convert to dev_pm_domain_attach|detach_list()
remoteproc: imx_rproc: Convert to dev_pm_domain_attach|detach_list()
remoteproc: imx_dsp_rproc: Convert to dev_pm_domain_attach|detach_list()
PM: domains: Add helper functions to attach/detach multiple PM domains
pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix domain
pmdomain: mediatek: Use devm_platform_ioremap_resource() in init_scp()
pmdomain: renesas: r8a779h0-sysc: Add r8a779h0 support
pmdomain: imx8mp-blk-ctrl: Error out if domains are missing in DT
pmdomain: ti: Add a null pointer check to the omap_prm_domain_init
pmdomain: renesas: rcar-gen4-sysc: Remove unneeded includes
pmdomain: core: Print a message when unused power domains are disabled
pmdomain: qcom: rpmpd: Keep one RPM handle for all RPMPDs
pmdomain: core: Scale down parent/child performance states in reverse order
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Amphenol ChipCap 2
- ASPEED g6 PWM/Fan tach
- Astera Labs PT5161L retimer
- ASUS ROG RYUJIN II 360 AIO cooler
- LTC4282
- Microsoft Surface devices
- MPS MPQ8785 Synchronous Step-Down Converter
- NZXT Kraken X and Z series AIO CPU coolers
Additional chip support in existing drivers:
- Ayaneo Air Plus 7320u (oxp-sensors)
- INA260 (ina2xx)
- XPS 9315 (dell-smm)
- MSI customer ID (nct6683)
Devicetree bindings updates:
- Common schema for hardware monitoring devices
- Common schema for fans
- Update chip descriptions to use common schema
- Document regulator properties in several drivers
- Explicit bindings for infineon buck converters
Other improvements:
- Replaced rbtree with maple tree register cache in several drivers
- Added support for humidity min/max alarm and volatage fault
attributes to hwmon core
- Dropped non-functional I2C_CLASS_HWMON support for drivers w/o
detect()
- Dropped obsolete and redundant entried from MAINTAINERS
- Cleaned up axi-fan-control and coretemp drivers
- Minor fixes and improvements in several other drivers"
* tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (70 commits)
hwmon: (dell-smm) Add XPS 9315 to fan control whitelist
hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach
dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control
dt-bindings: hwmon: fan: Add fan binding to schema
dt-bindings: hwmon: tda38640: Add interrupt & regulator properties
hwmon: (amc6821) add of_match table
dt-bindings: hwmon: lm75: use common hwmon schema
hwmon: (sis5595) drop unused DIV_TO_REG function
dt-bindings: hwmon: reference common hwmon schema
dt-bindings: hwmon: lltc,ltc4286: use common hwmon schema
dt-bindings: hwmon: adi,adm1275: use common hwmon schema
dt-bindings: hwmon: ti,ina2xx: use common hwmon schema
dt-bindings: hwmon: add common properties
hwmon: (pmbus/ir38064) Use PMBUS_REGULATOR_ONE to declare regulator
hwmon: (pmbus/lm25066) Use PMBUS_REGULATOR_ONE to declare regulator
hwmon: (pmbus/tda38640) Use PMBUS_REGULATOR_ONE to declare regulator
regulator: dt-bindings: promote infineon buck converters to their own binding
dt-bindings: hwmon/pmbus: ti,lm25066: document regulators
dt-bindings: hwmon: nuvoton,nct6775: Add compatible value for NCT6799
MAINTAINERS: Drop redundant hwmon entries
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The biggest feature is the locking overhaul. Up until now the
synchronization in the GPIO subsystem was broken. There was a single
spinlock "protecting" multiple data structures but doing it wrong (as
evidenced by several places where it would be released when a sleeping
function was called and then reacquired without checking the protected
state).
We tried to use an RW semaphore before but the main issue with GPIO is
that we have drivers implementing the interfaces in both sleeping and
non-sleeping ways as well as user-facing interfaces that can be called
both from process as well as atomic contexts. Both ends converge in
the same code paths that can use neither spinlocks nor mutexes. The
only reasonable way out is to use SRCU and go mostly lockless. To that
end: we add several SRCU structs in relevant places and use them to
assure consistency between API calls together with atomic reads and
writes of GPIO descriptor flags where it makes sense.
This code has spent several weeks in next and has received several
fixes in the first week or two after which it stabilized nicely. The
GPIO subsystem is now resilient to providers being suddenly unbound.
We managed to also remove the existing character device RW semaphore
and the obsolete global spinlock.
Other than the locking rework we have one new driver (for Chromebook
EC), much appreciated documentation improvements from Kent and the
regular driver improvements, DT-bindings updates and GPIOLIB core
tweaks.
Serialization rework:
- use SRCU to serialize access to the global GPIO device list, to
GPIO device structs themselves and to GPIO descriptors
- make the GPIO subsystem resilient to the GPIO providers being
unbound while the API calls are in progress
- don't dereference the SRCU-protected chip pointer if the
information we need can be obtained from the GPIO device structure
- move some of the information contained in struct gpio_chip to
struct gpio_device to further reduce the need to dereference the
former
- pass the GPIO device struct instead of the GPIO chip to sysfs
callback to, again, reduce the need for accessing the latter
- get GPIO descriptors from the GPIO device, not from the chip for
the same reason
- allow for mostly lockless operation of the GPIO driver API: assure
consistency with SRCU and atomic operations
- remove the global GPIO spinlock
- remove the character device RW semaphore
Core GPIOLIB:
- constify pointers in GPIO API where applicable
- unify the GPIO counting APIs for ACPI and OF
- provide a macro for iterating over all GPIOs, not only the ones
that are requested
- remove leftover typedefs
- pass the consumer device to GPIO core in
devm_fwnode_gpiod_get_index() for improved logging
- constify the GPIO bus type
- don't warn about removing GPIO chips with descriptors still held by
users as we can now handle this situation gracefully
- remove unused logging helpers
- unexport functions that are only used internally in the GPIO
subsystem
- set the device type (assign the relevant struct device_type) for
GPIO devices
New drivers:
- add the ChromeOS EC GPIO driver
Driver improvements:
- allow building gpio-vf610 with COMPILE_TEST as well as disabling it
in menuconfig (before it was always built for i.MX cofigs)
- count the number of EICs using the device properties instead of
hard-coding it in gpio-eic-sprd
- improve the device naming, extend the debugfs output and add
lockdep asserts to gpio-sim
DT bindings:
- document the 'label' property for gpio-pca9570
- convert aspeed,ast2400-gpio bindings to DT schema
- disallow unevaluated properties for gpio-mvebu
- document a new model in renesas,rcar-gpio
Documentation:
- improve the character device kerneldocs in user-space headers
- add proper documentation for the character device uAPI (both v1 and v2)
- move the sysfs and gpio-mockup docs into the "obsolete" section
- improve naming consistency for GPIO terms
- clarify the line values description for sysfs
- minor docs improvements
- improve the driver API contract for setting GPIO direction
- mark unsafe APIs as deprecated in kerneldocs and suggest
replacements
Other:
- remove an obsolete test from selftests"
* tag 'gpio-updates-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
gpio: sysfs: repair export returning -EPERM on 1st attempt
selftest: gpio: remove obsolete gpio-mockup test
gpiolib: Deduplicate cleanup for-loop in gpiochip_add_data_with_key()
dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schema
gpio: acpi: Make acpi_gpio_count() take firmware node as a parameter
gpio: of: Make of_gpio_get_count() take firmware node as a parameter
gpiolib: Pass consumer device through to core in devm_fwnode_gpiod_get_index()
gpio: sim: use for_each_hwgpio()
gpio: provide for_each_hwgpio()
gpio: don't warn about removing GPIO chips with active users anymore
gpio: sim: delimit the fwnode name with a ":" when generating labels
gpio: sim: add lockdep asserts
gpio: Add ChromeOS EC GPIO driver
gpio: constify of_phandle_args in of_find_gpio_device_by_xlate()
gpio: fix memory leak in gpiod_request_commit()
gpio: constify opaque pointer "data" in gpio_device_find()
gpio: cdev: fix a NULL-pointer dereference with DEBUG enabled
gpio: uapi: clarify default_values being logical
gpio: sysfs: fix inverted pointer logic
gpio: don't let lockdep complain about inherently dangerous RCU usage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release sees some exciting changes from David Lechner which
implements some optimisations that have been talked about for a long
time which allows client drivers to pre-prepare SPI messages for
repeated or low latency use. This lets us move work out of latency
sensitive paths and avoid repeating work for frequently performed
operations. As well as being useful in itself this will also be used
in future to allow controllers to directly trigger SPI operations (eg,
from interrupts).
Otherwise this release has mostly been focused on cleanups, plus a
couple of new devices:
- Support for pre-optimising messages
- A big set of updates from Uwe Kleine-König moving drivers to use
APIs with more modern terminology for controllers
- Major overhaul of the s3c64xx driver
- Support for Google GS101 and Samsung Exynos850"
* tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits)
spi: Introduce SPI_INVALID_CS and is_valid_cs()
spi: Fix types of the last chip select storage variables
spi: Consistently use BIT for cs_index_mask
spi: Exctract spi_dev_check_cs() helper
spi: Exctract spi_set_all_cs_unused() helper
spi: s3c64xx: switch exynos850 to new port config data
spi: s3c64xx: switch gs101 to new port config data
spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id
spi: s3c64xx: get rid of the OF alias ID dependency
spi: s3c64xx: introduce s3c64xx_spi_set_port_id()
spi: s3c64xx: let the SPI core determine the bus number
spi: s3c64xx: allow FIFO depth to be determined from the compatible
spi: s3c64xx: retrieve the FIFO depth from the device tree
spi: s3c64xx: determine the fifo depth only once
spi: s3c64xx: allow full FIFO masks
spi: s3c64xx: define a magic value
spi: dt-bindings: introduce FIFO depth properties
spi: axi-spi-engine: use struct_size() macro
spi: axi-spi-engine: use __counted_by() attribute
spi: axi-spi-engine: remove p from struct spi_engine_message_state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a very quiet release, mostly cleanups, API updates and
simple device additions. I messed up slightly and there are a couple
of duplicated commits resulting from me leaving things in my inbox
which didn't seem worth removing by the time I noticed them.
- Conversion of several drivers to GPIO descriptors
- Build out the features of of the MP8859 driver
- Support for Qualcomm PM4125 and PM6150"
* tag 'regulator-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (31 commits)
regulator: lp8788-buck: fix copy and paste bug in lp8788_dvs_gpio_request()
regulator: core: make regulator_class constant
regulator: da9121: Remove unused of_gpio.h
regulator: userspace-consumer: add module device table
regulator: dt-bindings: gpio-regulator: Fix "gpios-states" and "states" array bounds
regulator: mp8859: Implement set_current_limit()
regulator: mp8859: Report slew rate
regulator: mp8859: Support status and error readback
regulator: mp8859: Support active discharge control
regulator: mp8859: Support mode operations
regulator: mp8859: Support enable control
regulator: mp8859: Validate and log device identifier information
regulator: mp8859: Specify register accessibility and enable caching
regulator: max8998: Convert to GPIO descriptors
regulator: max8997: Convert to GPIO descriptors
regulator: lp8788-buck: Fully convert to GPIO descriptors
regulator: da9055: Fully convert to GPIO descriptors
regulator: max8973: Finalize switch to GPIO descriptors
regulator: dt-bindings: qcom,usb-vbus-regulator: add support for PM4125
regulator: dt-bindings: qcom,usb-vbus-regulator: add support for PM4125
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Just two updates this time around, a rework of max_register handling
which enables us to support devices with only one register better and
a new test which will be used to validate use of some new SPI
optimisations which will be coming in during this merge window"
* tag 'regmap-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Add a test for ranges in combination with windows
regmap: rework ->max_register handling
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Drop the use of BLK_BOUNCE_HIGH
- Fix partition switch for GP3
- Remove usage of the deprecated ida_simple API
MMC host:
- cqhci: Update bouncing email-addresses in MAINTAINERS
- davinci_mmc: Use sg_miter for PIO
- dw_mmc-hi3798cv200: Convert the DT bindings to YAML
- dw_mmc-hi3798mv200: Add driver for the new dw_mmc variant
- fsl-imx-esdhc: A couple of corrections/updates to the DT bindings
- meson-mx-sdhc: Drop use of the ->card_hw_reset() callback
- moxart-mmc: Use sg_miter for PIO
- moxart-mmc: Fix accounting for DMA transfers
- mvsdio: Use sg_miter for PIO
- mxcmmc: Use sg_miter for PIO
- omap: Use sg_miter for PIO
- renesas,sdhi: Add support for R-Car V4M variant
- sdhci-esdhc-mcf: Use sg_miter for swapping
- sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002 variants
- sh_mmcif: Use sg_miter for PIO
- tmio: Avoid concurrent runs of mmc_request_done()"
* tag 'mmc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (44 commits)
mmc: core: make mmc_host_class constant
mmc: core: Fix switch on gp3 partition
mmc: tmio: comment the ERR_PTR usage in this driver
mmc: mmc_spi: Don't mention DMA direction
mmc: dw_mmc: Remove unused of_gpio.h
mmc: dw_mmc: add support for hi3798mv200
dt-bindings: mmc: hisilicon,hi3798cv200-dw-mshc: add Hi3798MV200 binding
dt-bindings: mmc: dw-mshc-hi3798cv200: convert to YAML
mmc: dw_mmc-hi3798cv200: remove MODULE_ALIAS()
mmc: core: Use a struct device* as in-param to mmc_of_parse_clk_phase()
mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove function
mmc: tmio: avoid concurrent runs of mmc_request_done()
dt-bindings: mmc: fsl-imx-mmc: Document the required clocks
mmc: sh_mmcif: Advance sg_miter before reading blocks
mmc: sh_mmcif: sg_miter must not be atomic
mmc: sdhci-esdhc-mcf: Flag the sg_miter as atomic
dt-bindings: mmc: fsl-imx-esdhc: add default and 100mhz state
mmc: core: constify the struct device_type usage
mmc: sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002
dt-bindings: mmc: sdhci-of-dwcmhsc: Add Sophgo CV1800B and SG2002 support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains the usual amount of driver and device tree changes.
Additionally there is a big rework of how pwm lowlevel drivers are
registered to prepare adding character device support.
Thanks to Dharma Balasubiramani, Dong Aisheng, Duje Mihanović, Jerome
Brunet, Raag Jadav and Rafał Miłecki for their contributions. And
sorry for those who still need some patience because I didn't manage
to empty my review queue"
* tag 'pwm/for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (185 commits)
pwm: imx-tpm: fix probe crash due to access registers without clock
pwm: meson: generalize 4 inputs clock on meson8 pwm type
dt-bindings: pwm: amlogic: Add a new binding for meson8 pwm types
dt-bindings: pwm: amlogic: fix s4 bindings
pwm: dwc: simplify error handling
pwm: dwc: Add 16 channel support for Intel Elkhart Lake
pwm: dwc: drop redundant error check
staging: greybus: pwm: Make use of devm_pwmchip_alloc() function
staging: greybus: pwm: Rework how the number of PWM lines is determined
staging: greybus: pwm: Drop unused gb_connection_set_data()
staging: greybus: pwm: Rely on pwm framework to pass a valid hwpwm
staging: greybus: pwm: Make use of pwmchip_parent() accessor
staging: greybus: pwm: Change prototype of helpers to prepare further changes
leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
drm/bridge: ti-sn65dsi86: Make use of devm_pwmchip_alloc() function
drm/bridge: ti-sn65dsi86: Make use of pwmchip_parent() accessor
gpio: mvebu: Make use of devm_pwmchip_alloc() function
pwm: xilinx: Make use of devm_pwmchip_alloc() function
pwm: xilinx: Prepare removing pwm_chip from driver data
pwm: vt8500: Make use of devm_pwmchip_alloc() function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware updates from Tzung-Bi Shih:
- Allow userspace to automatically load coreboot modules by adding
modaliases and sending uevents
- Make bus_type const
* tag 'tag-chrome-platform-firmware-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
firmware: coreboot: Replace tag with id table in driver struct
firmware: coreboot: Generate aliases for coreboot modules
firmware: coreboot: Generate modalias uevent for devices
firmware: coreboot: make coreboot_bus_type const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM core's IO submission (which include dm-io and dm-bufio) such
that a bio's IO priority is propagated. Work focused on enabling both
DM crypt and verity targets to retain the appropriate IO priority
- Fix DM raid reshape logic to not allow an empty flush bio to be
requeued due to false concern about the bio, which doesn't have a
data payload, accessing beyond the end of the device
- Fix DM core's internal resume so that it properly calls both presume
and resume methods, which fixes the potential for a postsuspend and
resume imbalance
- Update DM verity target to set DM_TARGET_SINGLETON flag because it
doesn't make sense to have a DM table with a mix of targets that
include dm-verity
- Small cleanups in DM crypt, thin, and integrity targets
- Fix references to dm-devel mailing list to use latest list address
* tag 'for-6.9/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: call the resume method on internal suspend
dm raid: fix false positive for requeue needed during reshape
dm-integrity: set max_integrity_segments in dm_integrity_io_hints
dm: update relevant MODULE_AUTHOR entries to latest dm-devel mailing list
dm ioctl: update DM_DRIVER_EMAIL to new dm-devel mailing list
dm verity: set DM_TARGET_SINGLETON feature flag
dm crypt: Fix IO priority lost when queuing write bios
dm verity: Fix IO priority lost when reading FEC and hash
dm bufio: Support IO priority
dm io: Support IO priority
dm crypt: remove redundant state settings after waking up
dm thin: add braces around conditional code that spans lines
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- fix leaked pages on dma_set_decrypted() failure (Rick Edgecombe)
- add a new swiotlb debugfs file (ZhangPeng)
* tag 'dma-mapping-6.9-2024-03-11' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: Leak pages on dma_set_decrypted() failure
swiotlb: add debugfs to track swiotlb transient pool usage
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Constification of bus_type pointer
- Preparations for user-space page-fault delivery
- Use a named kmem_cache for IOVA magazines
Intel VT-d changes from Lu Baolu:
- Add RBTree to track iommu probed devices
- Add Intel IOMMU debugfs document
- Cleanup and refactoring
ARM-SMMU Updates from Will Deacon:
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2: Support for Qualcomm X1E80100 MDSS
- SMMUv3: Significant rework of the driver's STE manipulation and
domain handling code. This is the initial part of a larger scale
rework aiming to improve the driver's implementation of the
IOMMU-API in preparation for hooking up IOMMUFD support.
AMD-Vi Updates:
- Refactor GCR3 table support for SVA
- Cleanups
Some smaller cleanups and fixes"
* tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu: Fix compilation without CONFIG_IOMMU_INTEL
iommu/amd: Fix sleeping in atomic context
iommu/dma: Document min_align_mask assumption
iommu/vt-d: Remove scalabe mode in domain_context_clear_one()
iommu/vt-d: Remove scalable mode context entry setup from attach_dev
iommu/vt-d: Setup scalable mode context entry in probe path
iommu/vt-d: Fix NULL domain on device release
iommu: Add static iommu_ops->release_domain
iommu/vt-d: Improve ITE fault handling if target device isn't present
iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected
PCI: Make pci_dev_is_disconnected() helper public for other drivers
iommu/vt-d: Use device rbtree in iopf reporting path
iommu/vt-d: Use rbtree to track iommu probed devices
iommu/vt-d: Merge intel_svm_bind_mm() into its caller
iommu/vt-d: Remove initialization for dynamically heap-allocated rcu_head
iommu/vt-d: Remove treatment for revoking PASIDs with pending page faults
iommu/vt-d: Add the document for Intel IOMMU debugfs
iommu/vt-d: Use kcalloc() instead of kzalloc()
iommu/vt-d: Remove INTEL_IOMMU_BROKEN_GFX_WA
iommu: re-use local fwnode variable in iommu_ops_from_fwnode()
...
|
|
This reverts commit cb1a393c40eee2f1692c995ea0cc6e45bfccde4d.
Since the arm64 WXN patch has been reverted, remove this hook as it
would not have any users.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/ZfGESD3a91lxH367@arm.com
|
|
The .get_modes() callback is supposed to return the number of modes,
never a negative error code. If a negative value is returned, it'll just
be interpreted as a negative count, and added to previous calculations.
Document the rules, but handle the negative values gracefully with an
error message.
Cc: stable@vger.kernel.org
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/50208c866facc33226a3c77b82bb96aeef8ef310.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Pick up support for injecting errors via ACPI EINJ into the CXL protocol
for v6.9.
|
|
Pick up support for CXL "HMEM reporting" for v6.9, i.e. build an HMAT
from CXL CDAT and PCIe switch information.
|
|
There exist card implementations with a CDAT table using a fixed size
buffer, but with entries filled in that do not fill the whole table
length size. Then, the last entry in the CDAT table may not mark the
end of the CDAT table buffer specified by the length field in the CDAT
header. It can be shorter with trailing unused (zero'ed) data. The
actual table length is determined while reading all CDAT entries of
the table with DOE.
If the table is greater than expected (containing zero'ed trailing
data), the CDAT parser fails with:
[ 48.691717] Malformed DSMAS table length: (24:0)
[ 48.702084] [CDAT:0x00] Invalid zero length
[ 48.711460] cxl_port endpoint1: Failed to parse CDAT: -22
In addition, a check of the table buffer length is missing to prevent
an out-of-bound access then parsing the CDAT table.
Hardening code against device returning borked table. Fix that by
providing an optional buffer length argument to
acpi_parse_entries_array() that can be used by cdat_table_parse() to
propagate the buffer size down to its users to check the buffer
length. This also prevents a possible out-of-bound access mentioned.
Add a check to warn about a malformed CDAT table length.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/ZdEnopFO0Tl3t2O1@rric.localdomain
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Move CXL protocol error types from einj.c (now einj-core.c) to einj-cxl.c.
einj-cxl.c implements the necessary handling for CXL protocol error
injection and exposes an API for the CXL core to use said functionality,
while also allowing the EINJ module to be built without CXL support.
Because CXL error types targeting CXL 1.0/1.1 ports require special
handling, only allow them to be injected through the new cxl debugfs
interface (next commit) and return an error when attempting to inject
through the legacy interface.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ben Cheatham <Benjamin.Cheatham@amd.com>
Link: https://lore.kernel.org/r/20240311142508.31717-3-Benjamin.Cheatham@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
"Improve the behavior during panic. The issues were found when testing
the ongoing changes introducing atomic consoles and printk kthreads:
- pr_flush() has to wait for the last reserved record instead of the
last finalized one. Note that records are finalized in random order
when generated by more CPUs in parallel.
- Ignore non-finalized records during panic(). Messages printed on
panic-CPU are always finalized. Messages printed by other CPUs
might never be finalized when the CPUs get stopped.
- Block new printk() calls on non-panic CPUs completely. Backtraces
are printed before entering the panic mode. Later messages would
just mess information printed by the panic CPU.
- Do not take console_lock in console_flush_on_panic() at all. The
original code did try_lock()/console_unlock(). The unlock part
might cause a deadlock when panic() happened in a scheduler code.
- Fix conversion of 64-bit sequence number for 32-bit atomic
operations"
* tag 'printk-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
dump_stack: Do not get cpu_sync for panic CPU
panic: Flush kernel log buffer at the end
printk: Avoid non-panic CPUs writing to ringbuffer
printk: Disable passing console lock owner completely during panic()
printk: ringbuffer: Skip non-finalized records in panic
printk: Wait for all reserved records with pr_flush()
printk: ringbuffer: Cleanup reader terminology
printk: Add this_cpu_in_panic()
printk: For @suppress_panic_printk check for other CPU in panic
printk: ringbuffer: Clarify special lpos values
printk: ringbuffer: Do not skip non-finalized records with prb_next_seq()
printk: Use prb_first_seq() as base for 32bit seq macros
printk: Adjust mapping for 32bit seq macros
printk: nbcon: Relocate 32bit seq macros
|
|
Yes, yes, I know the slab people were planning on going slow and letting
every subsystem fight this thing on their own. But let's just rip off
the band-aid and get it over and done with. I don't want to see a
number of unnecessary pull requests just to get rid of a flag that no
longer has any meaning.
This was mainly done with a couple of 'sed' scripts and then some manual
cleanup of the end result.
Link: https://lore.kernel.org/all/CAHk-=wji0u+OOtmAOD-5JV3SXcRJF___k_+8XNKmak0yd5vW1Q@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Freelist loading optimization (Chengming Zhou)
When the per-cpu slab is depleted and a new one loaded from the cpu
partial list, optimize the loading to avoid an irq enable/disable
cycle. This results in a 3.5% performance improvement on the "perf
bench sched messaging" test.
- Kernel boot parameters cleanup after SLAB removal (Xiongwei Song)
Due to two different main slab implementations we've had boot
parameters prefixed either slab_ and slub_ with some later becoming
an alias as both implementations gained the same functionality (i.e.
slab_nomerge vs slub_nomerge). In order to eventually get rid of the
implementation-specific names, the canonical and documented
parameters are now all prefixed slab_ and the slub_ variants become
deprecated but still working aliases.
- SLAB_ kmem_cache creation flags cleanup (Vlastimil Babka)
The flags had hardcoded #define values which became tedious and
error-prone when adding new ones. Assign the values via an enum that
takes care of providing unique bit numbers. Also deprecate
SLAB_MEM_SPREAD which was only used by SLAB, so it's a no-op since
SLAB removal. Assign it an explicit zero value. The removals of the
flag usage are handled independently in the respective subsystems,
with a final removal of any leftover usage planned for the next
release.
- Misc cleanups and fixes (Chengming Zhou, Xiaolei Wang, Zheng Yejian)
Includes removal of unused code or function parameters and a fix of a
memleak.
* tag 'slab-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: remove PARTIAL_NODE slab_state
mm, slab: remove memcg_from_slab_obj()
mm, slab: remove the corner case of inc_slabs_node()
mm/slab: Fix a kmemleak in kmem_cache_destroy()
mm, slab, kasan: replace kasan_never_merge() with SLAB_NO_MERGE
mm, slab: use an enum to define SLAB_ cache creation flags
mm, slab: deprecate SLAB_MEM_SPREAD flag
mm, slab: fix the comment of cpu partial list
mm, slab: remove unused object_size parameter in kmem_cache_flags()
mm/slub: remove parameter 'flags' in create_kmalloc_caches()
mm/slub: remove unused parameter in next_freelist_entry()
mm/slub: remove full list manipulation for non-debug slab
mm/slub: directly load freelist from cpu partial slab in the likely case
mm/slub: make the description of slab_min_objects helpful in doc
mm/slub: replace slub_$params with slab_$params in slub.rst
mm/slub: unify all sl[au]b parameters with "slab_$param"
Documentation: kernel-parameters: remove noaliencache
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Promote IMA/EVM to a proper LSM
This is the bulk of the diffstat, and the source of all the changes
in the VFS code. Prior to the start of the LSM stacking work it was
important that IMA/EVM were separate from the rest of the LSMs,
complete with their own hooks, infrastructure, etc. as it was the
only way to enable IMA/EVM at the same time as a LSM.
However, now that the bulk of the LSM infrastructure supports
multiple simultaneous LSMs, we can simplify things greatly by
bringing IMA/EVM into the LSM infrastructure as proper LSMs. This is
something I've wanted to see happen for quite some time and Roberto
was kind enough to put in the work to make it happen.
- Use the LSM hook default values to simplify the call_int_hook() macro
Previously the call_int_hook() macro required callers to supply a
default return value, despite a default value being specified when
the LSM hook was defined.
This simplifies the macro by using the defined default return value
which makes life easier for callers and should also reduce the number
of return value bugs in the future (we've had a few pop up recently,
hence this work).
- Use the KMEM_CACHE() macro instead of kmem_cache_create()
The guidance appears to be to use the KMEM_CACHE() macro when
possible and there is no reason why we can't use the macro, so let's
use it.
- Fix a number of comment typos in the LSM hook comment blocks
Not much to say here, we fixed some questionable grammar decisions in
the LSM hook comment blocks.
* tag 'lsm-pr-20240312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (28 commits)
cred: Use KMEM_CACHE() instead of kmem_cache_create()
lsm: use default hook return value in call_int_hook()
lsm: fix typos in security/security.c comment headers
integrity: Remove LSM
ima: Make it independent from 'integrity' LSM
evm: Make it independent from 'integrity' LSM
evm: Move to LSM infrastructure
ima: Move IMA-Appraisal to LSM infrastructure
ima: Move to LSM infrastructure
integrity: Move integrity_kernel_module_request() to IMA
security: Introduce key_post_create_or_update hook
security: Introduce inode_post_remove_acl hook
security: Introduce inode_post_set_acl hook
security: Introduce inode_post_create_tmpfile hook
security: Introduce path_post_mknod hook
security: Introduce file_release hook
security: Introduce file_post_open hook
security: Introduce inode_post_removexattr hook
security: Introduce inode_post_setattr hook
security: Align inode_setattr hook definition with EVM
...
|
