summaryrefslogtreecommitdiff
path: root/init
AgeCommit message (Collapse)Author
2022-03-24Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "Various misc subsystems, before getting into the post-linux-next material. 41 patches. Subsystems affected by this patch series: procfs, misc, core-kernel, lib, checkpatch, init, pipe, minix, fat, cgroups, kexec, kdump, taskstats, panic, kcov, resource, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits) Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang" kernel/resource: fix kfree() of bootmem memory again kcov: properly handle subsequent mmap calls kcov: split ioctl handling into locked and unlocked parts panic: move panic_print before kmsg dumpers panic: add option to dump all CPUs backtraces in panic_print docs: sysctl/kernel: add missing bit to panic_print taskstats: remove unneeded dead assignment kasan: no need to unset panic_on_warn in end_report() ubsan: no need to unset panic_on_warn in ubsan_epilogue() panic: unset panic_on_warn inside panic() docs: kdump: add scp example to write out the dump file docs: kdump: update description about sysfs file system support arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef riscv: mm: init: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef kexec: make crashk_res, crashk_low_res and crash_notes symbols always visible cgroup: use irqsave in cgroup_rstat_flush_locked(). fat: use pointer to simple type in put_user() minix: fix bug when opening a file with O_DIRECT ...
2022-03-24Merge tag 'net-next-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...
2022-03-23init/main.c: return 1 from handled __setup() functionsRandy Dunlap
initcall_blacklist() should return 1 to indicate that it handled its cmdline arguments. set_debug_rodata() should return 1 to indicate that it handled its cmdline arguments. Print a warning if the option string is invalid. This prevents these strings from being added to the 'init' program's environment as they are not init arguments/parameters. Link: https://lkml.kernel.org/r/20220221050901.23985-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Cc: Ingo Molnar <mingo@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23init: use ktime_us_delta() to make initcall_debug log more preciseMark-PK Tsai
Use ktime_us_delta() to make the initcall_debug log more precise than right shifting the result of ktime_to_ns() by 10 bits. Link: https://lkml.kernel.org/r/20220209053350.15771-1-mark-pk.tsai@mediatek.com Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Kees Cook <keescook@chromium.org> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: YJ Chiang <yj.chiang@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22Merge tag 'sched-core-2022-03-22' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Cleanups for SCHED_DEADLINE - Tracing updates/fixes - CPU Accounting fixes - First wave of changes to optimize the overhead of the scheduler build, from the fast-headers tree - including placeholder *_api.h headers for later header split-ups. - Preempt-dynamic using static_branch() for ARM64 - Isolation housekeeping mask rework; preperatory for further changes - NUMA-balancing: deal with CPU-less nodes - NUMA-balancing: tune systems that have multiple LLC cache domains per node (eg. AMD) - Updates to RSEQ UAPI in preparation for glibc usage - Lots of RSEQ/selftests, for same - Add Suren as PSI co-maintainer * tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits) sched/headers: ARM needs asm/paravirt_api_clock.h too sched/numa: Fix boot crash on arm64 systems headers/prep: Fix header to build standalone: <linux/psi.h> sched/headers: Only include <linux/entry-common.h> when CONFIG_GENERIC_ENTRY=y cgroup: Fix suspicious rcu_dereference_check() usage warning sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers sched/topology: Remove redundant variable and fix incorrect type in build_sched_domains sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity() sched/deadline,rt: Remove unused functions for !CONFIG_SMP sched/deadline: Use __node_2_[pdl|dle]() and rb_first_cached() consistently sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy() sched/deadline: Move bandwidth mgmt and reclaim functions into sched class source file sched/deadline: Remove unused def_dl_bandwidth sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE sched/tracing: Don't re-read p->state when emitting sched_switch event sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race sched/cpuacct: Remove redundant RCU read lock sched/cpuacct: Optimize away RCU read lock sched/cpuacct: Fix charge percpu cpuusage sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies ...
2022-03-22Merge tag 'locking-core-2022-03-21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "Changes in this cycle were: Bitops & cpumask: - Always inline various generic helpers, to improve code generation, but also for instrumentation, found by noinstr validation. - Add a x86-specific cpumask_clear_cpu() helper to improve code generation Atomics: - Fix atomic64_{read_acquire,set_release} fallbacks Lockdep: - Fix /proc/lockdep output loop iteration for classes - Fix /proc/lockdep potential access to invalid memory - Add Mark Rutland as reviewer for atomic primitives - Minor cleanups Jump labels: - Clean up the code a bit Misc: - Add __sched annotations to percpu rwsem primitives - Enable RT_MUTEXES on PREEMPT_RT by default - Stray v8086_mode() inlining fix, result of noinstr objtool validation" * tag 'locking-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: jump_label: Refactor #ifdef of struct static_key jump_label: Avoid unneeded casts in STATIC_KEY_INIT_{TRUE,FALSE} locking/lockdep: Iterate lock_classes directly when reading lockdep files x86/ptrace: Always inline v8086_mode() for instrumentation cpumask: Add a x86-specific cpumask_clear_cpu() helper locking: Enable RT_MUTEXES by default on PREEMPT_RT. locking/local_lock: Make the empty local_lock_*() function a macro. atomics: Fix atomic64_{read_acquire,set_release} fallbacks locking: Add missing __sched attributes cpumask: Always inline helpers which use bit manipulation functions asm-generic/bitops: Always inline all bit manipulation helpers locking/lockdep: Avoid potential access of invalid memory in lock_class lockdep: Use memset_startat() helper in reinit_class() MAINTAINERS: add myself as reviewer for atomics
2022-03-21Merge tag 'hardening-v5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kernel hardening updates from Kees Cook: - Add arm64 Shadow Call Stack support for GCC 12 (Dan Li) - Avoid memset with stack offset randomization under Clang (Marco Elver) - Clean up stackleak plugin to play nice with .noinstr (Kees Cook) - Check stack depth for greater usercopy hardening coverage (Kees Cook) * tag 'hardening-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arm64: Add gcc Shadow Call Stack support m68k: Implement "current_stack_pointer" xtensa: Implement "current_stack_pointer" usercopy: Check valid lifetime via stack depth stack: Constrain and fix stack offset randomization with Clang builds stack: Introduce CONFIG_RANDOMIZE_KSTACK_OFFSET gcc-plugins/stackleak: Ignore .noinstr.text and .entry.text gcc-plugins/stackleak: Exactly match strings instead of prefixes gcc-plugins/stackleak: Provide verbose mode
2022-03-11sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headersFrederic Weisbecker
Displaying "PREEMPT" on kernel headers when CONFIG_PREEMPT_DYNAMIC=y can be misleading for anybody involved in remote debugging because it is then not guaranteed that there is an actual preemption behaviour. It depends on default Kconfig or boot defined choices. Therefore, tell about PREEMPT_DYNAMIC on static kernel headers and leave the search for the actual preemption behaviour to browsing dmesg. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220217111240.GA742892@lothringen
2022-02-14stack: Introduce CONFIG_RANDOMIZE_KSTACK_OFFSETMarco Elver
The randomize_kstack_offset feature is unconditionally compiled in when the architecture supports it. To add constraints on compiler versions, we require a dedicated Kconfig variable. Therefore, introduce RANDOMIZE_KSTACK_OFFSET. Furthermore, this option is now also configurable by EXPERT kernels: while the feature is supposed to have zero performance overhead when disabled, due to its use of static branches, there are few cases where giving a distribution the option to disable the feature entirely makes sense. For example, in very resource constrained environments, which would never enable the feature to begin with, in which case the additional kernel code size increase would be redundant. Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220131090521.1947110-1-elver@google.com
2022-02-11locking: Enable RT_MUTEXES by default on PREEMPT_RT.Sebastian Andrzej Siewior
The CONFIG_RT_MUTEXES option is enabled by CONFIG_FUTEX and CONFIG_I2C. If both are disabled then a CONFIG_PREEMPT_RT build fails to compile. It is not possible to have a PREEMPT_RT kernel without RT_MUTEX support because RT_MUTEX based locking is always used. Enable CONFIG_RT_MUTEXES by default on PREEMPT_RT builds. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/YgKmhjkcuqWXdUjQ@linutronix.de
2022-02-09Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-02-09 We've added 126 non-merge commits during the last 16 day(s) which contain a total of 201 files changed, 4049 insertions(+), 2215 deletions(-). The main changes are: 1) Add custom BPF allocator for JITs that pack multiple programs into a huge page to reduce iTLB pressure, from Song Liu. 2) Add __user tagging support in vmlinux BTF and utilize it from BPF verifier when generating loads, from Yonghong Song. 3) Add per-socket fast path check guarding from cgroup/BPF overhead when used by only some sockets, from Pavel Begunkov. 4) Continued libbpf deprecation work of APIs/features and removal of their usage from samples, selftests, libbpf & bpftool, from Andrii Nakryiko and various others. 5) Improve BPF instruction set documentation by adding byte swap instructions and cleaning up load/store section, from Christoph Hellwig. 6) Switch BPF preload infra to light skeleton and remove libbpf dependency from it, from Alexei Starovoitov. 7) Fix architecture-agnostic macros in libbpf for accessing syscall arguments from BPF progs for non-x86 architectures, from Ilya Leoshkevich. 8) Rework port members in struct bpf_sk_lookup and struct bpf_sock to be of 16-bit field with anonymous zero padding, from Jakub Sitnicki. 9) Add new bpf_copy_from_user_task() helper to read memory from a different task than current. Add ability to create sleepable BPF iterator progs, from Kenny Yu. 10) Implement XSK batching for ice's zero-copy driver used by AF_XDP and utilize TX batching API from XSK buffer pool, from Maciej Fijalkowski. 11) Generate temporary netns names for BPF selftests to avoid naming collisions, from Hangbin Liu. 12) Implement bpf_core_types_are_compat() with limited recursion for in-kernel usage, from Matteo Croce. 13) Simplify pahole version detection and finally enable CONFIG_DEBUG_INFO_DWARF5 to be selected with CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor. 14) Misc minor fixes to libbpf and selftests from various folks. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (126 commits) selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide libbpf: Fix compilation warning due to mismatched printf format selftests/bpf: Test BPF_KPROBE_SYSCALL macro libbpf: Add BPF_KPROBE_SYSCALL macro libbpf: Fix accessing the first syscall argument on s390 libbpf: Fix accessing the first syscall argument on arm64 libbpf: Allow overriding PT_REGS_PARM1{_CORE}_SYSCALL selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390 libbpf: Fix accessing syscall arguments on riscv libbpf: Fix riscv register names libbpf: Fix accessing syscall arguments on powerpc selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macro libbpf: Add PT_REGS_SYSCALL_REGS macro selftests/bpf: Fix an endianness issue in bpf_syscall_macro test bpf: Fix bpf_prog_pack build HPAGE_PMD_SIZE bpf: Fix leftover header->pages in sparc and powerpc code. libbpf: Fix signedness bug in btf_dump_array_data() selftests/bpf: Do not export subtest as standalone test bpf, x86_64: Fail gracefully on bpf_jit_binary_pack_finalize failures ... ==================== Link: https://lore.kernel.org/r/20220209210050.8425-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-06net: initialize init_net earlierEric Dumazet
While testing a patch that will follow later ("net: add netns refcount tracker to struct nsproxy") I found that devtmpfs_init() was called before init_net was initialized. This is a bug, because devtmpfs_setup() calls ksys_unshare(CLONE_NEWNS); This has the effect of increasing init_net refcount, which will be later overwritten to 1, as part of setup_net(&init_net) We had too many prior patches [1] trying to work around the root cause. Really, make sure init_net is in BSS section, and that net_ns_init() is called earlier at boot time. Note that another patch ("vfs: add netns refcount tracker to struct fs_context") also will need net_ns_init() being called before vfs_caches_init() As a bonus, this patch saves around 4KB in .data section. [1] f8c46cb39079 ("netns: do not call pernet ops for not yet set up init_net namespace") b5082df8019a ("net: Initialise init_net.count to 1") 734b65417b24 ("net: Statically initialize init_net.dev_base_head") v2: fixed a build error reported by kernel build bots (CONFIG_NET=n) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02block: remove genhd.hChristoph Hellwig
There is no good reason to keep genhd.h separate from the main blkdev.h header that includes it. So fold the contents of genhd.h into blkdev.h and remove genhd.h entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02kbuild: Add CONFIG_PAHOLE_VERSIONNathan Chancellor
There are a few different places where pahole's version is turned into a three digit form with the exact same command. Move this command into scripts/pahole-version.sh to reduce the amount of duplication across the tree. Create CONFIG_PAHOLE_VERSION so the version code can be used in Kconfig to enable and disable configuration options based on the pahole version, which is already done in a couple of places. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220201205624.652313-3-nathan@kernel.org
2022-01-22lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()Vlastimil Babka
Currently, enabling CONFIG_STACKDEPOT means its stack_table will be allocated from memblock, even if stack depot ends up not actually used. The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit. This is fine for use-cases such as KASAN which is also a config option and has overhead on its own. But it's an issue for functionality that has to be actually enabled on boot (page_owner) or depends on hardware (GPU drivers) and thus the memory might be wasted. This was raised as an issue [1] when attempting to add stackdepot support for SLUB's debug object tracking functionality. It's common to build kernels with CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or create only specific kmem caches with debugging for testing purposes. It would thus be more efficient if stackdepot's table was allocated only when actually going to be used. This patch thus makes the allocation (and whole stack_depot_init() call) optional: - Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current well-defined point of allocation as part of mem_init(). Make CONFIG_KASAN select this flag. - Other users have to call stack_depot_init() as part of their own init when it's determined that stack depot will actually be used. This may depend on both config and runtime conditions. Convert current users which are page_owner and several in the DRM subsystem. Same will be done for SLUB later. - Because the init might now be called after the boot-time memblock allocation has given all memory to the buddy allocator, change stack_depot_init() to allocate stack_table with kvmalloc() when memblock is no longer available. Also handle allocation failure by disabling stackdepot (could have theoretically happened even with memblock allocation previously), and don't unnecessarily align the memblock allocation to its own size anymore. [1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> # stackdepot Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> From: Colin Ian King <colin.king@canonical.com> Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message There is a spelling mistake of the work allocation so fix this and re-phrase the message to make it easier to read. Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Vlastimil Babka <vbabka@suse.cz> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup On FLATMEM, we call page_ext_init_flatmem_late() just before kmem_cache_init() which means stack_depot_init() (called by page owner init) will not recognize properly it should use kvmalloc() and not memblock_alloc(). memblock_alloc() will also not issue a warning and return a block memory that can be invalid and cause kernel page fault when saving stacks, as reported by the kernel test robot [1]. Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so that slab_is_available() is true during stack_depot_init(). SPARSEMEM doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(), but a different page_ext_init() even later in the boot process. Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue. While at it, also actually resolve a checkpatch warning in stack_depot_init() from DRM CI, which was supposed to be in the original patch already. [1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3 Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended locks without backoff") landing recently to -next adding a new stack depot user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup4 Due to 4e66934eaadc ("lib: add reference counting tracking infrastructure") landing recently to net-next adding a new stack depot user in lib/ref_tracker.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Slab <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-19Merge tag 'kbuild-v5.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add new kconfig target 'make mod2noconfig', which will be useful to speed up the build and test iteration. - Raise the minimum supported version of LLVM to 11.0.0 - Refactor certs/Makefile - Change the format of include/config/auto.conf to stop double-quoting string type CONFIG options. - Fix ARCH=sh builds in dash - Separate compression macros for general purposes (cmd_bzip2 etc.) and the ones for decompressors (cmd_bzip2_with_size etc.) - Misc Makefile cleanups * tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kbuild: add cmd_file_size arch: decompressor: remove useless vmlinux.bin.all-y kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22} kbuild: drop $(size_append) from cmd_zstd sh: rename suffix-y to suffix_y doc: kbuild: fix default in `imply` table microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV} certs: move scripts/extract-cert to certs/ kbuild: do not quote string values in include/config/auto.conf kbuild: do not include include/config/auto.conf from shell scripts certs: simplify $(srctree)/ handling and remove config_filename macro kbuild: stop using config_filename in scripts/Makefile.modsign certs: remove misleading comments about GCC PR certs: refactor file cleaning certs: remove unneeded -I$(srctree) option for system_certificates.o certs: unify duplicated cmd_extract_certs and improve the log certs: use $< and $@ to simplify the key generation rule kbuild: remove headers_check stub kbuild: move headers_check.pl to usr/include/ certs: use if_changed to re-generate the key when the key type is changed ...
2022-01-17Merge branch 'modules-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module updates from Luis Chamberlain: "The biggest change here is in-kernel support for module decompression. This change is being made to help support LSMs like LoadPin as otherwise it loses link between the source of kernel module on the disk and binary blob that is being loaded into the kernel. kmod decompression is still done by userspace even with this is done, both because there are no measurable gains in not doing so and as it adds a secondary extra check for validating the module before loading it into the kernel. The rest of the changes are minor, the only other change worth mentionin there is Jessica Yu is now bowing out of maintenance of modules as she's taking a break from work. While there were other changes posted for modules, those have not yet received much review of testing so I'm not yet comfortable in merging any of those changes yet." * 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: module: fix signature check failures when using in-kernel decompression kernel: Fix spelling mistake "compresser" -> "compressor" MAINTAINERS: add mailing lists for kmod and modules module.h: allow #define strings to work with MODULE_IMPORT_NS module: add in-kernel support for decompressing MAINTAINERS: Remove myself as modules maintainer module: Remove outdated comment
2022-01-12Merge tag 'perf_core_for_v5.17_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Borislav Petkov: "Cleanup of the perf/kvm interaction." * tag 'perf_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Drop guest callback (un)register stubs KVM: arm64: Drop perf.c and fold its tiny bits of code into arm.c KVM: arm64: Hide kvm_arm_pmu_available behind CONFIG_HW_PERF_EVENTS=y KVM: arm64: Convert to the generic perf callbacks KVM: x86: Move Intel Processor Trace interrupt handler to vmx.c KVM: Move x86's perf guest info callbacks to generic KVM KVM: x86: More precisely identify NMI from guest when handling PMI KVM: x86: Drop current_vcpu for kvm_running_vcpu + kvm_arch_vcpu variable perf/core: Use static_call to optimize perf_guest_info_callbacks perf: Force architectures to opt-in to guest callbacks perf: Add wrappers for invoking guest callbacks perf/core: Rework guest callbacks to prepare for static_call support perf: Drop dead and useless guest "support" from arm, csky, nds32 and riscv perf: Stop pretending that perf can handle multiple guest callbacks KVM: x86: Register Processor Trace interrupt hook iff PT enabled in guest KVM: x86: Register perf callbacks after calling vendor's hardware_setup() perf: Protect perf_guest_cbs with RCU
2022-01-11module: add in-kernel support for decompressingDmitry Torokhov
Current scheme of having userspace decompress kernel modules before loading them into the kernel runs afoul of LoadPin security policy, as it loses link between the source of kernel module on the disk and binary blob that is being loaded into the kernel. To solve this issue let's implement decompression in kernel, so that we can pass a file descriptor of compressed module file into finit_module() which will keep LoadPin happy. To let userspace know what compression/decompression scheme kernel supports it will create /sys/module/compression attribute. kmod can read this attribute and decide if it can pass compressed file to finit_module(). New MODULE_INIT_COMPRESSED_DATA flag indicates that the kernel should attempt to decompress the data read from file descriptor prior to trying load the module. To simplify things kernel will only implement single decompression method matching compression method selected when generating modules. This patch implements gzip and xz; more can be added later, Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-01-11Merge tag 'locking_core_for_v5.17_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Borislav Petkov: "Lots of cleanups and preparation. Highlights: - futex: Cleanup and remove runtime futex_cmpxchg detection - rtmutex: Some fixes for the PREEMPT_RT locking infrastructure - kcsan: Share owner_on_cpu() between mutex,rtmutex and rwsem and annotate the racy owner->on_cpu access *once*. - atomic64: Dead-Code-Elemination" [ Description above by Peter Zijlstra ] * tag 'locking_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/atomic: atomic64: Remove unusable atomic ops futex: Fix additional regressions locking: Allow to include asm/spinlock_types.h from linux/spinlock_types_raw.h x86/mm: Include spinlock_t definition in pgtable. locking: Mark racy reads of owner->on_cpu locking: Make owner_on_cpu() into <linux/sched.h> lockdep/selftests: Adapt ww-tests for PREEMPT_RT lockdep/selftests: Skip the softirq related tests on PREEMPT_RT lockdep/selftests: Unbalanced migrate_disable() & rcu_read_lock(). lockdep/selftests: Avoid using local_lock_{acquire|release}(). lockdep: Remove softirq accounting on PREEMPT_RT. locking/rtmutex: Add rt_mutex_lock_nest_lock() and rt_mutex_lock_killable(). locking/rtmutex: Squash self-deadlock check for ww_rt_mutex. locking: Remove rt_rwlock_is_contended(). sched: Trigger warning if ->migration_disabled counter underflows. futex: Fix sparc32/m68k/nds32 build regression futex: Remove futex_cmpxchg detection futex: Ensure futex_atomic_cmpxchg_inatomic() is present kernel/locking: Use a pointer in ww_mutex_trylock().
2022-01-11Merge tag 'kcsan.2022.01.09a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull KCSAN updates from Paul McKenney: "This provides KCSAN fixes and also the ability to take memory barriers into account for weakly-ordered systems. This last can increase the probability of detecting certain types of data races" * tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits) kcsan: Only test clear_bit_unlock_is_negative_byte if arch defines it kcsan: Avoid nested contexts reading inconsistent reorder_access kcsan: Turn barrier instrumentation into macros kcsan: Make barrier tests compatible with lockdep kcsan: Support WEAK_MEMORY with Clang where no objtool support exists compiler_attributes.h: Add __disable_sanitizer_instrumentation objtool, kcsan: Remove memory barrier instrumentation from noinstr objtool, kcsan: Add memory barrier instrumentation to whitelist sched, kcsan: Enable memory barrier instrumentation mm, kcsan: Enable barrier instrumentation x86/qspinlock, kcsan: Instrument barrier of pv_queued_spin_unlock() x86/barriers, kcsan: Use generic instrumentation for non-smp barriers asm-generic/bitops, kcsan: Add instrumentation for barriers locking/atomics, kcsan: Add instrumentation for barriers locking/barriers, kcsan: Support generic instrumentation locking/barriers, kcsan: Add instrumentation for barriers kcsan: selftest: Add test case to check memory barrier instrumentation kcsan: Ignore GCC 11+ warnings about TSan runtime support kcsan: test: Add test cases for memory barrier instrumentation kcsan: test: Match reordered or normal accesses ...
2022-01-10Merge tag 'pm-5.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "The most signigicant change here is the addition of a new cpufreq 'P-state' driver for AMD processors as a better replacement for the venerable acpi-cpufreq driver. There are also other cpufreq updates (in the core, intel_pstate, ARM drivers), PM core updates (mostly related to adding new macros for declaring PM operations which should make the lives of driver developers somewhat easier), and a bunch of assorted fixes and cleanups. Summary: - Add new P-state driver for AMD processors (Huang Rui). - Fix initialization of min and max frequency QoS requests in the cpufreq core (Rafael Wysocki). - Fix EPP handling on Alder Lake in intel_pstate (Srinivas Pandruvada). - Make intel_pstate update cpuinfo.max_freq when notified of HWP capabilities changes and drop a redundant function call from that driver (Rafael Wysocki). - Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel, Stephen Boyd, Vladimir Zapolskiy). - Fix double devm_remap() in the Mediatek cpufreq driver (Hector Yuan). - Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz Luba). - Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman). - Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman). - Fix two comments in cpuidle code (Jason Wang, Yang Li). - Allow model-specific normal EPB value to be used in the intel_epb sysfs attribute handling code (Srinivas Pandruvada). - Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki). - Add safety net to supplier device release in the runtime PM core code (Rafael Wysocki). - Capture device status before disabling runtime PM for it (Rafael Wysocki). - Add new macros for declaring PM operations to allow drivers to avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and update some drivers to use these macros (Paul Cercueil). - Allow ACPI hardware signature to be honoured during restore from hibernation (David Woodhouse). - Update outdated operating performance points (OPP) documentation (Tang Yizhou). - Reduce log severity for informative message regarding frequency transition failures in devfreq (Tzung-Bi Shih). - Add DRAM frequency controller devfreq driver for Allwinner sunXi SoCs (Samuel Holland). - Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd Bergmann). - Add support for new layout of Psys PowerLimit Register on SPR to the Intel RAPL power capping driver (Zhang Rui). - Fix typo in a comment in idle_inject.c (Jason Wang). - Remove unused function definition from the DTPM (Dynamit Thermal Power Management) power capping framework (Daniel Lezcano). - Reduce DTPM trace verbosity (Daniel Lezcano)" * tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits) x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment cpuidle: use default_groups in kobj_type x86: intel_epb: Allow model specific normal EPB value MAINTAINERS: Add AMD P-State driver maintainer entry Documentation: amd-pstate: Add AMD P-State driver introduction cpufreq: amd-pstate: Add AMD P-State performance attributes cpufreq: amd-pstate: Add AMD P-State frequencies attributes cpufreq: amd-pstate: Add boost mode support for AMD P-State cpufreq: amd-pstate: Add trace for AMD P-State module cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution cpufreq: amd-pstate: Add fast switch function for AMD P-State cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors ACPI: CPPC: Add CPPC enable register function ACPI: CPPC: Check present CPUs for determining _CPC is valid ACPI: CPPC: Implement support for SystemIO registers x86/msr: Add AMD CPPC MSR definitions x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag cpufreq: use default_groups in kobj_type ...
2022-01-08kbuild: do not quote string values in include/config/auto.confMasahiro Yamada
The previous commit fixed up all shell scripts to not include include/config/auto.conf. Now that include/config/auto.conf is only included by Makefiles, we can change it into a more Make-friendly form. Previously, Kconfig output string values enclosed with double-quotes (both in the .config and include/config/auto.conf): CONFIG_X="foo bar" Unlike shell, Make handles double-quotes (and single-quotes as well) verbatim. We must rip them off when used. There are some patterns: [1] $(patsubst "%",%,$(CONFIG_X)) [2] $(CONFIG_X:"%"=%) [3] $(subst ",,$(CONFIG_X)) [4] $(shell echo $(CONFIG_X)) These are not only ugly, but also fragile. [1] and [2] do not work if the value contains spaces, like CONFIG_X=" foo bar " [3] does not work correctly if the value contains double-quotes like CONFIG_X="foo\"bar" [4] seems to work better, but has a cost of forking a process. Anyway, quoted strings were always PITA for our Makefiles. This commit changes Kconfig to stop quoting in include/config/auto.conf. These are the string type symbols referenced in Makefiles or scripts: ACPI_CUSTOM_DSDT_FILE ARC_BUILTIN_DTB_NAME ARC_TUNE_MCPU BUILTIN_DTB_SOURCE CC_IMPLICIT_FALLTHROUGH CC_VERSION_TEXT CFG80211_EXTRA_REGDB_KEYDIR EXTRA_FIRMWARE EXTRA_FIRMWARE_DIR EXTRA_TARGETS H8300_BUILTIN_DTB INITRAMFS_SOURCE LOCALVERSION MODULE_SIG_HASH MODULE_SIG_KEY NDS32_BUILTIN_DTB NIOS2_DTB_SOURCE OPENRISC_BUILTIN_DTB SOC_CANAAN_K210_DTB_SOURCE SYSTEM_BLACKLIST_HASH_LIST SYSTEM_REVOCATION_KEYS SYSTEM_TRUSTED_KEYS TARGET_CPU UNUSED_KSYMS_WHITELIST XILINX_MICROBLAZE0_FAMILY XILINX_MICROBLAZE0_HW_VER XTENSA_VARIANT_NAME I checked them one by one, and fixed up the code where necessary. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-01-05mm: Make SLAB_MERGE_DEFAULT depend on SL[AU]BHyeonggon Yoo
SLOB always manage objects of different caches in same page regardless of SLAB_MERGE_DEFAULT. Because it has no effect on SLOB, make it depend on SLAB || SLUB. Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/r/20211225060921.13584-1-42.hyeyoo@gmail.com
2021-12-30Merge branch 'cpufreq/arm/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq updates for 5.17-rc1 from Viresh Kumar: "- Qcom cpufreq driver updates improve irq support (Ard Biesheuvel, Stephen Boyd, and Vladimir Zapolskiy). - Fixes double devm_remap for mediatek driver (Hector Yuan). - Introduces thermal pressure helpers (Lukasz Luba)." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: mediatek-hw: Fix double devm_remap in hotplug case cpufreq: qcom-hw: Use optional irq API cpufreq: qcom-hw: Set CPU affinity of dcvsh interrupts cpufreq: qcom-hw: Fix probable nested interrupt handling cpufreq: qcom-cpufreq-hw: Avoid stack buffer for IRQ name arch_topology: Remove unused topology_set_thermal_pressure() and related cpufreq: qcom-cpufreq-hw: Use new thermal pressure update function cpufreq: qcom-cpufreq-hw: Update offline CPUs per-cpu thermal pressure thermal: cpufreq_cooling: Use new thermal pressure update function arch_topology: Introduce thermal pressure update function
2021-12-13Merge tag 'v5.16-rc5' into locking/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-12-09kcsan: Remove redundant zero-initialization of globalsMarco Elver
They are implicitly zero-initialized, remove explicit initialization. It keeps the upcoming additions to kcsan_ctx consistent with the rest. No functional change intended. Signed-off-by: Marco Elver <elver@google.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-12-02init/Kconfig: Drop linker version check for LD_ORPHAN_WARNNathan Chancellor
The minimum supported version of LLVM has been raised to 11.0.0, meaning this check is always true, so it can be dropped. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-11-25futex: Remove futex_cmpxchg detectionArnd Bergmann
Now that all architectures have a working futex implementation in any configuration, remove the runtime detection code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Vineet Gupta <vgupta@kernel.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Link: https://lore.kernel.org/r/20211026100432.1730393-2-arnd@kernel.org
2021-11-25futex: Ensure futex_atomic_cmpxchg_inatomic() is presentArnd Bergmann
The boot-time detection of futex_atomic_cmpxchg_inatomic() has a bug on some 32-bit arm builds, and Thomas Gleixner suggested that setting CONFIG_HAVE_FUTEX_CMPXCHG would avoid the problem, as it is always present anyway. Looking into which other architectures could do the same showed that almost all architectures have it, the exceptions being: - some old 32-bit MIPS uniprocessor cores without ll/sc - one xtensa variant with no SMP - 32-bit SPARC when built for SMP Fix MIPS And Xtensa by rearranging the generic code to let it be used as a fallback. For SPARC, the SMP definition just ends up turning off futex anyway, so this can be done at Kconfig time instead. Note that sparc32 glibc requires the CASA instruction for its mutexes anyway, which is only available when running on SPARCv9 or LEON CPUs, but needs to be implemented in the sparc32 kernel for those. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/20211026100432.1730393-1-arnd@kernel.org
2021-11-23arch_topology: Remove unused topology_set_thermal_pressure() and relatedLukasz Luba
There is no need of this function (and related) since code has been converted to use the new arch_update_thermal_pressure() API. The old code can be removed. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-11-17perf: Force architectures to opt-in to guest callbacksSean Christopherson
Introduce GUEST_PERF_EVENTS and require architectures to select it to allow registering and using guest callbacks in perf. This will hopefully make it more difficult for new architectures to add useless "support" for guest callbacks, e.g. via copy+paste. Stubbing out the helpers has the happy bonus of avoiding a load of perf_guest_cbs when GUEST_PERF_EVENTS=n on arm64/x86. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20211111020738.2512932-9-seanjc@google.com
2021-11-14kbuild: Fix -Wimplicit-fallthrough=5 error for GCC 5.x and 6.xGustavo A. R. Silva
-Wimplicit-fallthrough=5 was under cc-option because it was only available in GCC 7.x and newer so the build is now broken for GCC 5.x and 6.x: gcc: error: unrecognized command line option '-Wimplicit-fallthrough=5'; did you mean '-Wno-fallthrough'? Fix this by moving -Wimplicit-fallthrough=5 under cc-option. Fixes: dee2b702bcf0 ("kconfig: Add support for -Wimplicit-fallthrough") Reported-by: Nathan Chancellor <nathan@kernel.org> Co-developed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-14kconfig: Add support for -Wimplicit-fallthroughGustavo A. R. Silva
Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang. The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH, which is enabled by default. Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This bugfix only appears in Clang 14.0.0, so older versions still contain the bug and -Wimplicit-fallthrough won't be enabled for them, for now. This concludes a long journey and now we are finally getting rid of the unintentional fallthrough bug-class in the kernel, entirely. :) Link: https://github.com/llvm/llvm-project/commit/9ed4a94d6451046a51ef393cd62f00710820a7e8 [1] Link: https://bugs.llvm.org/show_bug.cgi?id=51094 [2] Link: https://github.com/KSPP/linux/issues/115 Link: https://github.com/ClangBuiltLinux/linux/issues/236 Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-14Merge tag 'sched_urgent_for_v5.16_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Avoid touching ~100 config files in order to be able to select the preemption model - clear cluster CPU masks too, on the CPU unplug path - prevent use-after-free in cfs - Prevent a race condition when updating CPU cache domains - Factor out common shared part of smp_prepare_cpus() into a common helper which can be called by both baremetal and Xen, in order to fix a booting of Xen PV guests * tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: preempt: Restore preemption model selection configs arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology() sched/fair: Prevent dead task groups from regaining cfs_rq's sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain() x86/smp: Factor out parts of native_smp_prepare_cpus()
2021-11-11mm: allow only SLUB on PREEMPT_RTIngo Molnar
Memory allocators may disable interrupts or preemption as part of the allocation and freeing process. For PREEMPT_RT it is important that these sections remain deterministic and short and therefore don't depend on the size of the memory to allocate/ free or the inner state of the algorithm. Until v3.12-RT the SLAB allocator was an option but involved several changes to meet all the requirements. The SLUB design fits better with PREEMPT_RT model and so the SLAB patches were dropped in the 3.12-RT patchset. Comparing the two allocator, SLUB outperformed SLAB in both throughput (time needed to allocate and free memory) and the maximal latency of the system measured with cyclictest during hackbench. SLOB was never evaluated since it was unlikely that it preforms better than SLAB. During a quick test, the kernel crashed with SLOB enabled during boot. Disable SLAB and SLOB on PREEMPT_RT. [bigeasy@linutronix.de: commit description] Link: https://lkml.kernel.org/r/20211015210336.gen3tib33ig5q2md@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-11preempt: Restore preemption model selection configsValentin Schneider
Commit c597bfddc9e9 ("sched: Provide Kconfig support for default dynamic preempt mode") changed the selectable config names for the preemption model. This means a config file must now select CONFIG_PREEMPT_BEHAVIOUR=y rather than CONFIG_PREEMPT=y to get a preemptible kernel. This means all arch config files would need to be updated - right now they'll all end up with the default CONFIG_PREEMPT_NONE_BEHAVIOUR. Rather than touch a good hundred of config files, restore usage of CONFIG_PREEMPT{_NONE, _VOLUNTARY}. Make them configure: o The build-time preemption model when !PREEMPT_DYNAMIC o The default boot-time preemption model when PREEMPT_DYNAMIC Add siblings of those configs with the _BUILD suffix to unconditionally designate the build-time preemption model (PREEMPT_DYNAMIC is built with the "highest" preemption model it supports, aka PREEMPT). Downstream configs should by now all be depending / selected by CONFIG_PREEMPTION rather than CONFIG_PREEMPT, so only a few sites need patching up. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Marco Elver <elver@google.com> Link: https://lore.kernel.org/r/20211110202448.4054153-2-valentin.schneider@arm.com
2021-11-09Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "87 patches. Subsystems affected by this patch series: mm (pagecache and hugetlb), procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs, init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork, sysvfs, kcov, gdb, resource, selftests, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits) ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL ipc: check checkpoint_restore_ns_capable() to modify C/R proc files selftests/kselftest/runner/run_one(): allow running non-executable files virtio-mem: disallow mapping virtio-mem memory via /dev/mem kernel/resource: disallow access to exclusive system RAM regions kernel/resource: clean up and optimize iomem_is_exclusive() scripts/gdb: handle split debug for vmlinux kcov: replace local_irq_save() with a local_lock_t kcov: avoid enable+disable interrupts if !in_task() kcov: allocate per-CPU memory on the relevant node Documentation/kcov: define `ip' in the example Documentation/kcov: include types.h in the example sysv: use BUILD_BUG_ON instead of runtime check kernel/fork.c: unshare(): use swap() to make code cleaner seq_file: fix passing wrong private data seq_file: move seq_escape() to a header signal: remove duplicate include in signal.h crash_dump: remove duplicate include in crash_dump.h crash_dump: fix boolreturn.cocci warning hfs/hfsplus: use WARN_ON for sanity check ...
2021-11-09init: make unknown command line param message clearerAndrew Halaney
The prior message is confusing users, which is the exact opposite of the goal. If the message is being seen, one of the following situations is happening: 1. the param is misspelled 2. the param is not valid due to the kernel configuration 3. the param is intended for init but isn't after the '--' delineator on the command line To make that more clear to the user, explicitly mention "kernel command line" and also note that the params are still passed to user space to avoid causing any alarm over params intended for init. Link: https://lkml.kernel.org/r/20211013223502.96756-1-ahalaney@redhat.com Fixes: 86d1919a4fb0 ("init: print out unknown kernel parameters") Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc updates from Andrew Morton: "257 patches. Subsystems affected by this patch series: scripts, ocfs2, vfs, and mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache, gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools, memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm, vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram, cleanups, kfence, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits) mm/damon: remove return value from before_terminate callback mm/damon: fix a few spelling mistakes in comments and a pr_debug message mm/damon: simplify stop mechanism Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions Docs/admin-guide/mm/damon/start: simplify the content Docs/admin-guide/mm/damon/start: fix a wrong link Docs/admin-guide/mm/damon/start: fix wrong example commands mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on mm/damon: remove unnecessary variable initialization Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM) selftests/damon: support watermarks mm/damon/dbgfs: support watermarks mm/damon/schemes: activate schemes based on a watermarks mechanism tools/selftests/damon: update for regions prioritization of schemes mm/damon/dbgfs: support prioritization weights mm/damon/vaddr,paddr: support pageout prioritization mm/damon/schemes: prioritize regions within the quotas mm/damon/selftests: support schemes quotas mm/damon/dbgfs: support quotas of schemes ...
2021-11-06memblock: use memblock_free for freeing virtual pointersMike Rapoport
Rename memblock_free_ptr() to memblock_free() and use memblock_free() when freeing a virtual pointer so that memblock_free() will be a counterpart of memblock_alloc() The callers are updated with the below semantic patch and manual addition of (void *) casting to pointers that are represented by unsigned long variables. @@ identifier vaddr; expression size; @@ ( - memblock_phys_free(__pa(vaddr), size); + memblock_free(vaddr, size); | - memblock_free_ptr(vaddr, size); + memblock_free(vaddr, size); ) [sfr@canb.auug.org.au: fixup] Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Juergen Gross <jgross@suse.com> Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06memblock: rename memblock_free to memblock_phys_freeMike Rapoport
Since memblock_free() operates on a physical range, make its name reflect it and rename it to memblock_phys_free(), so it will be a logical counterpart to memblock_phys_alloc(). The callers are updated with the below semantic patch: @@ expression addr; expression size; @@ - memblock_free(addr, size); + memblock_phys_free(addr, size); Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Juergen Gross <jgross@suse.com> Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06mm: create a new system state and fix core_kernel_text()Christophe Leroy
core_kernel_text() considers that until system_state in at least SYSTEM_RUNNING, init memory is valid. But init memory is freed a few lines before setting SYSTEM_RUNNING, so we have a small period of time when core_kernel_text() is wrong. Create an intermediate system state called SYSTEM_FREEING_INIT that is set before starting freeing init memory, and use it in core_kernel_text() to report init memory invalid earlier. Link: https://lkml.kernel.org/r/9ecfdee7dd4d741d172cb93ff1d87f1c58127c9a.1633001016.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06mm: disable NUMA_BALANCING_DEFAULT_ENABLED and TRANSPARENT_HUGEPAGE on ↵Sebastian Andrzej Siewior
PREEMPT_RT TRANSPARENT_HUGEPAGE: There are potential non-deterministic delays to an RT thread if a critical memory region is not THP-aligned and a non-RT buffer is located in the same hugepage-aligned region. It's also possible for an unrelated thread to migrate pages belonging to an RT task incurring unexpected page faults due to memory defragmentation even if khugepaged is disabled. Regular HUGEPAGEs are not affected by this can be used. NUMA_BALANCING: There is a non-deterministic delay to mark PTEs PROT_NONE to gather NUMA fault samples, increased page faults of regions even if mlocked and non-deterministic delays when migrating pages. [Mel Gorman worded 99% of the commit description]. Link: https://lore.kernel.org/all/20200304091159.GN3818@techsingularity.net/ Link: https://lore.kernel.org/all/20211026165100.ahz5bkx44lrrw5pt@linutronix.de/ Link: https://lkml.kernel.org/r/20211028143327.hfbxjze7palrpfgp@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-01Merge tag 'trace-v5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - kprobes: Restructured stack unwinder to show properly on x86 when a stack dump happens from a kretprobe callback. - Fix to bootconfig parsing - Have tracefs allow owner and group permissions by default (only denying others). There's been pressure to allow non root to tracefs in a controlled fashion, and using groups is probably the safest. - Bootconfig memory managament updates. - Bootconfig clean up to have the tools directory be less dependent on changes in the kernel tree. - Allow perf to be traced by function tracer. - Rewrite of function graph tracer to be a callback from the function tracer instead of having its own trampoline (this change will happen on an arch by arch basis, and currently only x86_64 implements it). - Allow multiple direct trampolines (bpf hooks to functions) be batched together in one synchronization. - Allow histogram triggers to add variables that can perform calculations against the event's fields. - Use the linker to determine architecture callbacks from the ftrace trampoline to allow for proper parameter prototypes and prevent warnings from the compiler. - Extend histogram triggers to key off of variables. - Have trace recursion use bit magic to determine preempt context over if branches. - Have trace recursion disable preemption as all use cases do anyway. - Added testing for verification of tracing utilities. - Various small clean ups and fixes. * tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits) tracing/histogram: Fix semicolon.cocci warnings tracing/histogram: Fix documentation inline emphasis warning tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together tracing: Show size of requested perf buffer bootconfig: Initialize ret in xbc_parse_tree() ftrace: do CPU checking after preemption disabled ftrace: disable preemption when recursion locked tracing/histogram: Document expression arithmetic and constants tracing/histogram: Optimize division by a power of 2 tracing/histogram: Covert expr to const if both operands are constants tracing/histogram: Simplify handling of .sym-offset in expressions tracing: Fix operator precedence for hist triggers expression tracing: Add division and multiplication support for hist triggers tracing: Add support for creating hist trigger variables from literal selftests/ftrace: Stop tracing while reading the trace file by default MAINTAINERS: Update KPROBES and TRACING entries test_kprobes: Move it from kernel/ to lib/ docs, kprobes: Remove invalid URL and add new reference samples/kretprobes: Fix return value if register_kretprobe() failed lib/bootconfig: Fix the xbc_get_info kerneldoc ...
2021-10-18block: move elevator.h to block/Christoph Hellwig
Except for the features passed to blk_queue_required_elevator_features, elevator.h is only needed internally to the block layer. Move the ELEVATOR_F_* definitions to blkdev.h, and the move elevator.h to block/, dropping all the spurious includes outside of that. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-13-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-10bootconfig: init: Fix memblock leak in xbc_make_cmdline()Masami Hiramatsu
Free unused memblock in a error case to fix memblock leak in xbc_make_cmdline(). Link: https://lkml.kernel.org/r/163177339181.682366.8713781325929549256.stgit@devnote2 Fixes: 51887d03aca1 ("bootconfig: init: Allow admin to use bootconfig for kernel command line") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-10-10bootconfig: Rename xbc_destroy_all() to xbc_exit()Masami Hiramatsu
Avoid using this noisy name and use more calm one. This is just a name change. No functional change. Link: https://lkml.kernel.org/r/163187295918.2366983.5231840238429996027.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-10-10bootconfig: Add xbc_get_info() for the node informationMasami Hiramatsu
Add xbc_get_info() API which allows user to get the number of used xbc_nodes and the size of bootconfig data. This is also useful for checking the bootconfig is initialized or not. Link: https://lkml.kernel.org/r/163177340877.682366.4360676589783197627.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-10-10bootconfig: Allocate xbc_data inside xbc_init()Masami Hiramatsu
Allocate 'xbc_data' in the xbc_init() so that it does not need to care about the ownership of the copied data. Link: https://lkml.kernel.org/r/163177339986.682366.898762699429769117.stgit@devnote2 Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>