| Age | Commit message (Collapse) | Author |
|---|
|
Most of this code is basically self contained, move it out of the core
io_uring file to bring a bit more separation to the registration related
bits. This moves another ~10% of the code into register.c.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for FUTEX_WAKE/WAIT primitives.
IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as
it does support passing in a bitset.
Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and
FUTEX_WAIT_BITSET.
For both of them, they are using the futex2 interface.
FUTEX_WAKE is straight forward, as those can always be done directly from
the io_uring submission without needing async handling. For FUTEX_WAIT,
things are a bit more complicated. If the futex isn't ready, then we
rely on a callback via futex_queue->wake() when someone wakes up the
futex. From that calback, we queue up task_work with the original task,
which will post a CQE and wake it, if necessary.
Cancelations are supported, both from the application point-of-view,
but also to be able to cancel pending waits if the ring exits before
all events have occurred. The return value of futex_unqueue() is used
to gate who wins the potential race between cancelation and futex
wakeups. Whomever gets a 'ret == 1' return from that claims ownership
of the io_uring futex request.
This is just the barebones wait/wake support. PI or REQUEUE support is
not added at this point, unclear if we might look into that later.
Likewise, explicit timeouts are not supported either. It is expected
that users that need timeouts would do so via the usual io_uring
mechanism to do that using linked timeouts.
The SQE format is as follows:
`addr` Address of futex
`fd` futex2(2) FUTEX2_* flags
`futex_flags` io_uring specific command flags. None valid now.
`addr2` Value of futex
`addr3` Mask to wake/wait
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This adds support for an async version of waitid(2), in a fully async
version. If an event isn't immediately available, wait for a callback
to trigger a retry.
The format of the sqe is as follows:
sqe->len The 'which', the idtype being queried/waited for.
sqe->fd The 'pid' (or id) being waited for.
sqe->file_index The 'options' being set.
sqe->addr2 A pointer to siginfo_t, if any, being filled in.
buf_index, add3, and waitid_flags are reserved/unused for now.
waitid_flags will be used for options for this request type. One
interesting use case may be to add multi-shot support, so that the
request stays armed and posts a notification every time a monitored
process state change occurs.
Note that this does not support rusage, on Arnd's recommendation.
See the waitid(2) man page for details on the arguments.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add internal part of send zerocopy notifications. There are two main
structures, the first one is struct io_notif, which carries inside
struct ubuf_info and maps 1:1 to it. io_uring will be binding a number
of zerocopy send requests to it and ask to complete (aka flush) it. When
flushed and all attached requests and skbs complete, it'll generate one
and only one CQE. There are intended to be passed into the network layer
as struct msghdr::msg_ubuf.
The second concept is notification slots. The userspace will be able to
register an array of slots and subsequently addressing them by the index
in the array. Slots are independent of each other. Each slot can have
only one notifier at a time (called active notifier) but many notifiers
during the lifetime. When active, a notifier not going to post any
completion but the userspace can attach requests to it by specifying
the corresponding slot while issueing send zc requests. Eventually, the
userspace will want to "flush" the notifier losing any way to attach
new requests to it, however it can use the next atomatically added
notifier of this slot or of any other slot.
When the network layer is done with all enqueued skbs attached to a
notifier and doesn't need the specified in them user data, the flushed
notifier will post a CQE.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3ecf54c31a85762bf679b0a432c9f43ecf7e61cc.1657643355.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We already have the declarations in opdef.h, move the rest into its own
file rather than in the main io_uring.c file.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move both the opcodes related to it, and the internals code dealing with
it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This also helps cleanup the io_uring.h cancel parts, as we can make
things static in the cancel.c file, mostly.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a io_poll_issue() rather than export the general task_work locking
and io_issue_sqe(), and put the io_op_defs definition and structure into
a separate header file so that poll can use it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This also means moving a bit more of the fixed file handling to the
filetable side, which makes sense separately too.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While at it, convert the handlers to just use io_eopnotsupp_prep()
if CONFIG_NET isn't set.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Would be nice to sort out Kconfig for this and don't even compile
epoll.c if we don't have epoll configured.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This splits out sync_file_range, fsync, and fallocate.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This splits out splice and tee support.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This splits out renameat, unlinkat, mkdirat, symlinkat, and linkat.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for splitting io_uring up a bit, move it into its own
top level directory. It didn't really belong in fs/ anyway, as it's
not a file system only API.
This adds io_uring/ and moves the core files in there, and updates the
MAINTAINERS file for the new location.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
