| Age | Commit message (Collapse) | Author |
|---|
|
A previous commit added a trylock for getting the SQPOLL thread info via
fdinfo, but this introduced a regression where we often fail to get it if
the thread is busy. For that case, we end up not printing the current CPU
and PID info.
Rather than rely on this lock, just print the pid we already stored in
the io_sq_data struct, and ensure we update the current CPU every time
we've slept or potentially rescheduled. The latter won't potentially be
100% accurate, but that wasn't the case before either as the task can
get migrated at any time unless it has been pinned at creation time.
We retain keeping the io_sq_data dereference inside the ctx->uring_lock,
as it has always been, as destruction of the thread and data happen below
that. We could make this RCU safe, but there's little point in doing that.
With this, we always print the last valid information we had, rather than
have spurious outputs with missing information.
Fixes: 7644b1a1c9a7 ("io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Syzbot reported a null-ptr-deref of sqd->thread inside
io_sqpoll_wq_cpu_affinity. It turns out the sqd->thread can go away
from under us during io_uring_register, in case the process gets a
fatal signal during io_uring_register.
It is not particularly hard to hit the race, and while I am not sure
this is the exact case hit by syzbot, it solves it. Finally, checking
->thread is enough to close the race because we locked sqd while
"parking" the thread, thus preventing it from going away.
I reproduced it fairly consistently with a program that does:
int main(void) {
...
io_uring_queue_init(RING_LEN, &ring1, IORING_SETUP_SQPOLL);
while (1) {
io_uring_register_iowq_aff(ring, 1, &mask);
}
}
Executed in a loop with timeout to trigger SIGTERM:
while true; do timeout 1 /a.out ; done
This will hit the following BUG() in very few attempts.
BUG: kernel NULL pointer dereference, address: 00000000000007a8
PGD 800000010e949067 P4D 800000010e949067 PUD 10e46e067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 15715 Comm: dead-sqpoll Not tainted 6.5.0-rc7-next-20230825-g193296236fa0-dirty #23
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:io_sqpoll_wq_cpu_affinity+0x27/0x70
Code: 90 90 90 0f 1f 44 00 00 55 53 48 8b 9f 98 03 00 00 48 85 db 74 4f
48 89 df 48 89 f5 e8 e2 f8 ff ff 48 8b 43 38 48 85 c0 74 22 <48> 8b b8
a8 07 00 00 48 89 ee e8 ba b1 00 00 48 89 df 89 c5 e8 70
RSP: 0018:ffffb04040ea7e70 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff93c010749e40 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffffffa7653331 RDI: 00000000ffffffff
RBP: ffffb04040ea7eb8 R08: 0000000000000000 R09: c0000000ffffdfff
R10: ffff93c01141b600 R11: ffffb04040ea7d18 R12: ffff93c00ea74840
R13: 0000000000000011 R14: 0000000000000000 R15: ffff93c00ea74800
FS: 00007fb7c276ab80(0000) GS:ffff93c36f200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000007a8 CR3: 0000000111634003 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die_body+0x1a/0x60
? page_fault_oops+0x154/0x440
? do_user_addr_fault+0x174/0x7b0
? exc_page_fault+0x63/0x140
? asm_exc_page_fault+0x22/0x30
? io_sqpoll_wq_cpu_affinity+0x27/0x70
__io_register_iowq_aff+0x2b/0x60
__io_uring_register+0x614/0xa70
__x64_sys_io_uring_register+0xaa/0x1a0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7fb7c226fec9
Code: 2e 00 b8 ca 00 00 00 0f 05 eb a5 66 0f 1f 44 00 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d 97 7f 2d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe2c0674f8 EFLAGS: 00000246 ORIG_RAX: 00000000000001ab
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb7c226fec9
RDX: 00007ffe2c067530 RSI: 0000000000000011 RDI: 0000000000000003
RBP: 00007ffe2c0675d0 R08: 00007ffe2c067550 R09: 00007ffe2c067550
R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffe2c067750 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Modules linked in:
CR2: 00000000000007a8
---[ end trace 0000000000000000 ]---
Reported-by: syzbot+c74fea926a78b8a91042@syzkaller.appspotmail.com
Fixes: ebdfefc09c6d ("io_uring/sqpoll: fix io-wq affinity when IORING_SETUP_SQPOLL is used")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/87v8cybuo6.fsf@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we setup the ring with SQPOLL, then that polling thread has its
own io-wq setup. This means that if the application uses
IORING_REGISTER_IOWQ_AFF to set the io-wq affinity, we should not be
setting it for the invoking task, but rather the sqpoll task.
Add an sqpoll helper that parks the thread and updates the affinity,
and use that one if we're using SQPOLL.
Fixes: fe76421d1da1 ("io_uring: allow user configurable IO thread CPU affinity")
Cc: stable@vger.kernel.org # 5.10+
Link: https://github.com/axboe/liburing/discussions/884
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The sq thread actively releases CPU resources by calling the
cond_resched() and schedule() interfaces when it is idle. Therefore,
more resources are available for other threads to run.
There exists a problem in sq thread: it does not unlock sqd->lock before
releasing CPU resources every time. This makes other threads pending on
sqd->lock for a long time. For example, the following interfaces all
require sqd->lock: io_sq_offload_create(), io_register_iowq_max_workers()
and io_ring_exit_work().
Before the sq thread releases CPU resources, unlocking sqd->lock will
provide the user a better experience because it can respond quickly to
user requests.
Signed-off-by: Kanchan Joshi<joshi.k@samsung.com>
Signed-off-by: Wenwen Chen<wenwen.chen@samsung.com>
Link: https://lore.kernel.org/r/20230525082626.577862-1-wenwen.chen@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Users may specify a CPU where the sqpoll thread would run. This may
conflict with cpuset operations because of strict PF_NO_SETAFFINITY
requirement. That flag is unnecessary for polling "kernel" threads, see
the reasoning in commit 01e68ce08a30 ("io_uring/io-wq: stop setting
PF_NO_SETAFFINITY on io-wq workers"). Drop the flag on poll threads too.
Fixes: 01e68ce08a30 ("io_uring/io-wq: stop setting PF_NO_SETAFFINITY on io-wq workers")
Link: https://lore.kernel.org/all/20230314162559.pnyxdllzgw7jozgx@blackpad/
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20230314183332.25834-1-mkoutny@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Change the return type to void since it always return 0, and no need
to do the checking in syscall io_uring_enter.
Signed-off-by: Quanfa Fu <quanfafu@gmail.com>
Link: https://lore.kernel.org/r/20230115071519.554282-1-quanfafu@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently @audit_context is allocated twice for io_uring workers:
1. copy_process() calls audit_alloc();
2. io_sq_thread() or io_wqe_worker() calls audit_alloc_kernel() (which
is effectively audit_alloc()) and overwrites @audit_context,
causing:
BUG: memory leak
unreferenced object 0xffff888144547400 (size 1024):
<...>
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8135cfc3>] audit_alloc+0x133/0x210
[<ffffffff81239e63>] copy_process+0xcd3/0x2340
[<ffffffff8123b5f3>] create_io_thread+0x63/0x90
[<ffffffff81686604>] create_io_worker+0xb4/0x230
[<ffffffff81686f68>] io_wqe_enqueue+0x248/0x3b0
[<ffffffff8167663a>] io_queue_iowq+0xba/0x200
[<ffffffff816768b3>] io_queue_async+0x113/0x180
[<ffffffff816840df>] io_req_task_submit+0x18f/0x1a0
[<ffffffff816841cd>] io_apoll_task_func+0xdd/0x120
[<ffffffff8167d49f>] tctx_task_work+0x11f/0x570
[<ffffffff81272c4e>] task_work_run+0x7e/0xc0
[<ffffffff8125a688>] get_signal+0xc18/0xf10
[<ffffffff8111645b>] arch_do_signal_or_restart+0x2b/0x730
[<ffffffff812ea44e>] exit_to_user_mode_prepare+0x5e/0x180
[<ffffffff844ae1b2>] syscall_exit_to_user_mode+0x12/0x20
[<ffffffff844a7e80>] do_syscall_64+0x40/0x80
Then,
3. io_sq_thread() or io_wqe_worker() frees @audit_context using
audit_free();
4. do_exit() eventually calls audit_free() again, which is okay
because audit_free() does a NULL check.
As suggested by Paul Moore, fix it by deleting audit_alloc_kernel() and
redundant audit_free() calls.
Fixes: 5bd2182d58e9 ("audit,io_uring,io-wq: add some basic audit support to io_uring")
Suggested-by: Paul Moore <paul@paul-moore.com>
Cc: stable@vger.kernel.org
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20220803222343.31673-1-yepeilin.cs@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_uring/io_uring.h already includes io_uring_types.h, no need to
include it every time. Kill it in a bunch of places, it prepares us for
following patches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/94d8c943fbe0ef949981c508ddcee7fc1c18850f.1655384063.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
