summaryrefslogtreecommitdiff
path: root/kernel/entry
AgeCommit message (Collapse)Author
2021-11-19signal: Replace force_fatal_sig with force_exit_sig when in doubtEric W. Biederman
Recently to prevent issues with SECCOMP_RET_KILL and similar signals being changed before they are delivered SA_IMMUTABLE was added. Unfortunately this broke debuggers[1][2] which reasonably expect to be able to trap synchronous SIGTRAP and SIGSEGV even when the target process is not configured to handle those signals. Add force_exit_sig and use it instead of force_fatal_sig where historically the code has directly called do_exit. This has the implementation benefits of going through the signal exit path (including generating core dumps) without the danger of allowing userspace to ignore or change these signals. This avoids userspace regressions as older kernels exited with do_exit which debuggers also can not intercept. In the future is should be possible to improve the quality of implementation of the kernel by changing some of these force_exit_sig calls to force_fatal_sig. That can be done where it matters on a case-by-case basis with careful analysis. Reported-by: Kyle Huey <me@kylehuey.com> Reported-by: kernel test robot <oliver.sang@intel.com> [1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com [2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Fixes: a3616a3c0272 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die") Fixes: 83a1f27ad773 ("signal/powerpc: On swapcontext failure force SIGSEGV") Fixes: 9bc508cf0791 ("signal/s390: Use force_sigsegv in default_trap_handler") Fixes: 086ec444f866 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig") Fixes: c317d306d550 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails") Fixes: 695dd0d634df ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit") Fixes: 1fbd60df8a85 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.") Fixes: 941edc5bf174 ("exit/syscall_user_dispatch: Send ordinary signals on failure") Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Kyle Huey <khuey@kylehuey.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-11-10Merge branch 'exit-cleanups-for-v5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull exit cleanups from Eric Biederman: "While looking at some issues related to the exit path in the kernel I found several instances where the code is not using the existing abstractions properly. This set of changes introduces force_fatal_sig a way of sending a signal and not allowing it to be caught, and corrects the misuse of the existing abstractions that I found. A lot of the misuse of the existing abstractions are silly things such as doing something after calling a no return function, rolling BUG by hand, doing more work than necessary to terminate a kernel thread, or calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL). In the review a deficiency in force_fatal_sig and force_sig_seccomp where ptrace or sigaction could prevent the delivery of the signal was found. I have added a change that adds SA_IMMUTABLE to change that makes it impossible to interrupt the delivery of those signals, and allows backporting to fix force_sig_seccomp And Arnd found an issue where a function passed to kthread_run had the wrong prototype, and after my cleanup was failing to build." * 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits) soc: ti: fix wkup_m3_rproc_boot_thread return type signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV) exit/r8188eu: Replace the macro thread_exit with a simple return 0 exit/rtl8712: Replace the macro thread_exit with a simple return 0 exit/rtl8723bs: Replace the macro thread_exit with a simple return 0 signal/x86: In emulate_vsyscall force a signal instead of calling do_exit signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails exit/syscall_user_dispatch: Send ordinary signals on failure signal: Implement force_fatal_sig exit/kthread: Have kernel threads return instead of calling do_exit signal/s390: Use force_sigsegv in default_trap_handler signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved. signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON signal/sparc: In setup_tsb_params convert open coded BUG into BUG signal/powerpc: On swapcontext failure force SIGSEGV signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL) signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT signal/sparc32: Remove unreachable do_exit in do_sparc_fault ...
2021-10-29exit/syscall_user_dispatch: Send ordinary signals on failureEric W. Biederman
Use force_fatal_sig instead of calling do_exit directly. This ensures the ordinary signal handling path gets invoked, core dumps as appropriate get created, and for multi-threaded processes all of the threads are terminated not just a single thread. When asked Gabriel Krisman Bertazi <krisman@collabora.com> said [1]: > ebiederm@xmission.com (Eric W. Biederman) asked: > > > Why does do_syscal_user_dispatch call do_exit(SIGSEGV) and > > do_exit(SIGSYS) instead of force_sig(SIGSEGV) and force_sig(SIGSYS)? > > > > Looking at the code these cases are not expected to happen, so I would > > be surprised if userspace depends on any particular behaviour on the > > failure path so I think we can change this. > > Hi Eric, > > There is not really a good reason, and the use case that originated the > feature doesn't rely on it. > > Unless I'm missing yet another problem and others correct me, I think > it makes sense to change it as you described. > > > Is using do_exit in this way something you copied from seccomp? > > I'm not sure, its been a while, but I think it might be just that. The > first prototype of SUD was implemented as a seccomp mode. If at some point it becomes interesting we could relax "force_fatal_sig(SIGSEGV)" to instead say "force_sig_fault(SIGSEGV, SEGV_MAPERR, sd->selector)". I avoid doing that in this patch to avoid making it possible to catch currently uncatchable signals. Cc: Gabriel Krisman Bertazi <krisman@collabora.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> [1] https://lkml.kernel.org/r/87mtr6gdvi.fsf@collabora.com Link: https://lkml.kernel.org/r/20211020174406.17889-14-ebiederm@xmission.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2021-09-22entry: rseq: Call rseq_handle_notify_resume() in tracehook_notify_resume()Sean Christopherson
Invoke rseq_handle_notify_resume() from tracehook_notify_resume() now that the two function are always called back-to-back by architectures that have rseq. The rseq helper is stubbed out for architectures that don't support rseq, i.e. this is a nop across the board. Note, tracehook_notify_resume() is horribly named and arguably does not belong in tracehook.h as literally every line of code in it has nothing to do with tracing. But, that's been true since commit a42c6ded827d ("move key_repace_session_keyring() into tracehook_notify_resume()") first usurped tracehook_notify_resume() back in 2012. Punt cleaning that mess up to future patches. No functional change intended. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210901203030.1292304-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: rseq: Update rseq when processing NOTIFY_RESUME on xfer to KVM guestSean Christopherson
Invoke rseq's NOTIFY_RESUME handler when processing the flag prior to transferring to a KVM guest, which is roughly equivalent to an exit to userspace and processes many of the same pending actions. While the task cannot be in an rseq critical section as the KVM path is reachable only by via ioctl(KVM_RUN), the side effects that apply to rseq outside of a critical section still apply, e.g. the current CPU needs to be updated if the task is migrated. Clearing TIF_NOTIFY_RESUME without informing rseq can lead to segfaults and other badness in userspace VMMs that use rseq in combination with KVM, e.g. due to the CPU ID being stale after task migration. Fixes: 72c3c0fe54a3 ("x86/kvm: Use generic xfer to guest work function") Reported-by: Peter Foley <pefoley@google.com> Bisected-by: Doug Evans <dje@google.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210901203030.1292304-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-31tick/nohz: Only check for RCU deferred wakeup on user/guest entry when neededFrederic Weisbecker
Checking for and processing RCU-nocb deferred wakeup upon user/guest entry is only relevant when nohz_full runs on the local CPU, otherwise the periodic tick should take care of it. Make sure we don't needlessly pollute these fast-paths as a -3% performance regression on a will-it-scale.per_process_ops has been reported so far. Fixes: 47b8ff194c1f (entry: Explicitly flush pending rcuog wakeup before last rescheduling point) Fixes: 4ae7dc97f726 (entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point) Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210527113441.465489-1-frederic@kernel.org
2021-04-26Merge tag 'core-entry-2021-04-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core entry updates from Thomas Gleixner: "A trivial cleanup of typo fixes" * tag 'core-entry-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Fix typos in comments
2021-04-19preempt/dynamic: Fix typo in macro conditional statementZhouyi Zhou
Commit 40607ee97e4e ("preempt/dynamic: Provide irqentry_exit_cond_resched() static call") tried to provide irqentry_exit_cond_resched() static call in irqentry_exit, but has a typo in macro conditional statement. Fixes: 40607ee97e4e ("preempt/dynamic: Provide irqentry_exit_cond_resched() static call") Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210410073523.5493-1-zhouzhouyi@gmail.com
2021-03-22entry: Fix typos in commentsIngo Molnar
Fix 3 single-word typos in the generic syscall entry code. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-17entry: Explicitly flush pending rcuog wakeup before last rescheduling pointFrederic Weisbecker
Following the idle loop model, cleanly check for pending rcuog wakeup before the last rescheduling point on resuming to user mode. This way we can avoid to do it from rcu_user_enter() with the last resort self-IPI hack that enforces rescheduling. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210131230548.32970-5-frederic@kernel.org
2021-02-17preempt/dynamic: Provide irqentry_exit_cond_resched() static callPeter Zijlstra (Intel)
Provide static call to control IRQ preemption (called in CONFIG_PREEMPT) so that we can override its behaviour when preempt= is overriden. Since the default behaviour is full preemption, its call is initialized to provide IRQ preemption when preempt= isn't passed. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-8-frederic@kernel.org
2021-02-06entry: Use different define for selector variable in SUDGabriel Krisman Bertazi
Michael Kerrisk suggested that, from an API perspective, it is a bad idea to share the PR_SYS_DISPATCH_ defines between the prctl operation and the selector variable. Therefore, define two new constants to be used by SUD's selector variable and update the corresponding documentation and test cases. While this changes the API syscall user dispatch has never been part of a Linux release, it will show up for the first time in 5.11. Suggested-by: Michael Kerrisk (man-pages) <mtk.manpages@gmail.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210205184321.2062251-1-krisman@collabora.com
2021-02-06entry: Ensure trap after single-step on system call returnGabriel Krisman Bertazi
Commit 299155244770 ("entry: Drop usage of TIF flags in the generic syscall code") introduced a bug on architectures using the generic syscall entry code, in which processes stopped by PTRACE_SYSCALL do not trap on syscall return after receiving a TIF_SINGLESTEP. The reason is that the meaning of TIF_SINGLESTEP flag is overloaded to cause the trap after a system call is executed, but since the above commit, the syscall call handler only checks for the SYSCALL_WORK flags on the exit work. Split the meaning of TIF_SINGLESTEP such that it only means single-step mode, and create a new type of SYSCALL_WORK to request a trap immediately after a syscall in single-step mode. In the current implementation, the SYSCALL_WORK flag shadows the TIF_SINGLESTEP flag for simplicity. Update x86 to flip this bit when a tracer enables single stepping. Fixes: 299155244770 ("entry: Drop usage of TIF flags in the generic syscall code") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Kyle Huey <me@kylehuey.com> Link: https://lore.kernel.org/r/87h7mtc9pr.fsf_-_@collabora.com
2021-01-28entry: Unbreak single step reporting behaviourYuxuan Shui
The move of TIF_SYSCALL_EMU to SYSCALL_WORK_SYSCALL_EMU broke single step reporting. The original code reported the single step when TIF_SINGLESTEP was set and TIF_SYSCALL_EMU was not set. The SYSCALL_WORK conversion got the logic wrong and now the reporting only happens when both bits are set. Restore the original behaviour. [ tglx: Massaged changelog and dropped the pointless double negation ] Fixes: 64eb35f701f0 ("ptrace: Migrate TIF_SYSCALL_EMU to use SYSCALL_WORK flag") Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com> Link: https://lore.kernel.org/r/877do3gaq9.fsf@m5Zedd9JOGzJrf0
2020-12-14Merge tag 'core-mm-2020-12-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull kmap updates from Thomas Gleixner: "The new preemtible kmap_local() implementation: - Consolidate all kmap_atomic() internals into a generic implementation which builds the base for the kmap_local() API and make the kmap_atomic() interface wrappers which handle the disabling/enabling of preemption and pagefaults. - Switch the storage from per-CPU to per task and provide scheduler support for clearing mapping when scheduling out and restoring them when scheduling back in. - Merge the migrate_disable/enable() code, which is also part of the scheduler pull request. This was required to make the kmap_local() interface available which does not disable preemption when a mapping is established. It has to disable migration instead to guarantee that the virtual address of the mapped slot is the same across preemption. - Provide better debug facilities: guard pages and enforced utilization of the mapping mechanics on 64bit systems when the architecture allows it. - Provide the new kmap_local() API which can now be used to cleanup the kmap_atomic() usage sites all over the place. Most of the usage sites do not require the implicit disabling of preemption and pagefaults so the penalty on 64bit and 32bit non-highmem systems is removed and quite some of the code can be simplified. A wholesale conversion is not possible because some usage depends on the implicit side effects and some need to be cleaned up because they work around these side effects. The migrate disable side effect is only effective on highmem systems and when enforced debugging is enabled. On 64bit and 32bit non-highmem systems the overhead is completely avoided" * tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) ARM: highmem: Fix cache_is_vivt() reference x86/crashdump/32: Simplify copy_oldmem_page() io-mapping: Provide iomap_local variant mm/highmem: Provide kmap_local* sched: highmem: Store local kmaps in task struct x86: Support kmap_local() forced debugging mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL microblaze/mm/highmem: Add dropped #ifdef back xtensa/mm/highmem: Make generic kmap_atomic() work correctly mm/highmem: Take kmap_high_get() properly into account highmem: High implementation details and document API Documentation/io-mapping: Remove outdated blurb io-mapping: Cleanup atomic iomap mm/highmem: Remove the old kmap_atomic cruft highmem: Get rid of kmap_types.h xtensa/mm/highmem: Switch to generic kmap atomic sparc/mm/highmem: Switch to generic kmap atomic powerpc/mm/highmem: Switch to generic kmap atomic nds32/mm/highmem: Switch to generic kmap atomic ...
2020-12-02entry: Add syscall_exit_to_user_mode_work()Sven Schnelle
This is the same as syscall_exit_to_user_mode() but without calling exit_to_user_mode(). This can be used if there is an architectural reason to avoid the combo function, e.g. restarting a syscall without returning to userspace. Before returning to user space the caller has to invoke exit_to_user_mode(). [ tglx: Amended comments ] Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201201142755.31931-6-svens@linux.ibm.com
2020-12-02entry: Add exit_to_user_mode() wrapperSven Schnelle
Called from architecture specific code when syscall_exit_to_user_mode() is not suitable. It simply calls __exit_to_user_mode(). This way __exit_to_user_mode() can still be inlined because it is declared static __always_inline. [ tglx: Amended comments and moved it to a different place in the header ] Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201201142755.31931-5-svens@linux.ibm.com
2020-12-02entry_Add_enter_from_user_mode_wrapperSven Schnelle
To be called from architecture specific code if the combo interfaces are not suitable. It simply calls __enter_from_user_mode(). This way __enter_from_user_mode will still be inlined because it is declared static __always_inline. [ tglx: Amend comments and move it to a different location in the header ] Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201201142755.31931-4-svens@linux.ibm.com
2020-12-02entry: Rename exit_to_user_mode()Sven Schnelle
In order to make this function publicly available rename it so it can still be inlined. An additional exit_to_user_mode() function will be added with a later commit. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201201142755.31931-3-svens@linux.ibm.com
2020-12-02entry: Rename enter_from_user_mode()Sven Schnelle
In order to make this function publicly available rename it so it can still be inlined. An additional enter_from_user_mode() function will be added with a later commit. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201201142755.31931-2-svens@linux.ibm.com
2020-12-02entry: Support Syscall User Dispatch on common syscall entryGabriel Krisman Bertazi
Syscall User Dispatch (SUD) must take precedence over seccomp and ptrace, since the use case is emulation (it can be invoked with a different ABI) such that seccomp filtering by syscall number doesn't make sense in the first place. In addition, either the syscall is dispatched back to userspace, in which case there is no resource for to trace, or the syscall will be executed, and seccomp/ptrace will execute next. Since SUD runs before tracepoints, it needs to be a SYSCALL_WORK_EXIT as well, just to prevent a trace exit event when dispatch was triggered. For that, the on_syscall_dispatch() examines context to skip the tracepoint, audit and other work. [ tglx: Add a comment on the exit side ] Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201127193238.821364-5-krisman@collabora.com
2020-12-02kernel: Implement selective syscall userspace redirectionGabriel Krisman Bertazi
Introduce a mechanism to quickly disable/enable syscall handling for a specific process and redirect to userspace via SIGSYS. This is useful for processes with parts that require syscall redirection and parts that don't, but who need to perform this boundary crossing really fast, without paying the cost of a system call to reconfigure syscall handling on each boundary transition. This is particularly important for Windows games running over Wine. The proposed interface looks like this: prctl(PR_SET_SYSCALL_USER_DISPATCH, <op>, <off>, <length>, [selector]) The range [<offset>,<offset>+<length>) is a part of the process memory map that is allowed to by-pass the redirection code and dispatch syscalls directly, such that in fast paths a process doesn't need to disable the trap nor the kernel has to check the selector. This is essential to return from SIGSYS to a blocked area without triggering another SIGSYS from rt_sigreturn. selector is an optional pointer to a char-sized userspace memory region that has a key switch for the mechanism. This key switch is set to either PR_SYS_DISPATCH_ON, PR_SYS_DISPATCH_OFF to enable and disable the redirection without calling the kernel. The feature is meant to be set per-thread and it is disabled on fork/clone/execv. Internally, this doesn't add overhead to the syscall hot path, and it requires very little per-architecture support. I avoided using seccomp, even though it duplicates some functionality, due to previous feedback that maybe it shouldn't mix with seccomp since it is not a security mechanism. And obviously, this should never be considered a security mechanism, since any part of the program can by-pass it by using the syscall dispatcher. For the sysinfo benchmark, which measures the overhead added to executing a native syscall that doesn't require interception, the overhead using only the direct dispatcher region to issue syscalls is pretty much irrelevant. The overhead of using the selector goes around 40ns for a native (unredirected) syscall in my system, and it is (as expected) dominated by the supervisor-mode user-address access. In fact, with SMAP off, the overhead is consistently less than 5ns on my test box. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201127193238.821364-4-krisman@collabora.com
2020-11-24sched: highmem: Store local kmaps in task structThomas Gleixner
Instead of storing the map per CPU provide and use per task storage. That prepares for local kmaps which are preemptible. The context switch code is preparatory and not yet in use because kmap_atomic() runs with preemption disabled. Will be made usable in the next step. The context switch logic is safe even when an interrupt happens after clearing or before restoring the kmaps. The kmap index in task struct is not modified so any nesting kmap in an interrupt will use unused indices and on return the counter is the same as before. Also add an assert into the return to user space code. Going back to user space with an active kmap local is a nono. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20201118204007.372935758@linutronix.de
2020-11-16entry: Drop usage of TIF flags in the generic syscall codeGabriel Krisman Bertazi
Now that the flags migration in the common syscall entry code is complete and the code relies exclusively on thread_info::syscall_work, clean up the accesses to TI flags in that path. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-10-krisman@collabora.com
2020-11-16ptrace: Migrate TIF_SYSCALL_EMU to use SYSCALL_WORK flagGabriel Krisman Bertazi
On architectures using the generic syscall entry code the architecture independent syscall work is moved to flags in thread_info::syscall_work. This removes architecture dependencies and frees up TIF bits. Define SYSCALL_WORK_SYSCALL_EMU, use it in the generic entry code and convert the code which uses the TIF specific helper functions to use the new *_syscall_work() helpers which either resolve to the new mode for users of the generic entry code or to the TIF based functions for the other architectures. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-8-krisman@collabora.com
2020-11-16ptrace: Migrate to use SYSCALL_TRACE flagGabriel Krisman Bertazi
On architectures using the generic syscall entry code the architecture independent syscall work is moved to flags in thread_info::syscall_work. This removes architecture dependencies and frees up TIF bits. Define SYSCALL_WORK_SYSCALL_TRACE, use it in the generic entry code and convert the code which uses the TIF specific helper functions to use the new *_syscall_work() helpers which either resolve to the new mode for users of the generic entry code or to the TIF based functions for the other architectures. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-7-krisman@collabora.com
2020-11-16tracepoints: Migrate to use SYSCALL_WORK flagGabriel Krisman Bertazi
On architectures using the generic syscall entry code the architecture independent syscall work is moved to flags in thread_info::syscall_work. This removes architecture dependencies and frees up TIF bits. Define SYSCALL_WORK_SYSCALL_TRACEPOINT, use it in the generic entry code and convert the code which uses the TIF specific helper functions to use the new *_syscall_work() helpers which either resolve to the new mode for users of the generic entry code or to the TIF based functions for the other architectures. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-6-krisman@collabora.com
2020-11-16seccomp: Migrate to use SYSCALL_WORK flagGabriel Krisman Bertazi
On architectures using the generic syscall entry code the architecture independent syscall work is moved to flags in thread_info::syscall_work. This removes architecture dependencies and frees up TIF bits. Define SYSCALL_WORK_SECCOMP, use it in the generic entry code and convert the code which uses the TIF specific helper functions to use the new *_syscall_work() helpers which either resolve to the new mode for users of the generic entry code or to the TIF based functions for the other architectures. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-5-krisman@collabora.com
2020-11-16entry: Wire up syscall_work in common entry codeGabriel Krisman Bertazi
Prepare the common entry code to use the SYSCALL_WORK flags. They will be defined in subsequent patches for each type of syscall work. SYSCALL_WORK_ENTRY/EXIT are defined for the transition, as they will replace the TIF_ equivalent defines. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-4-krisman@collabora.com
2020-11-15entry: Fix spelling/typo errors in irq entry codeIra Weiny
s/reguired/required/ s/Interupts/Interrupts/ s/quiescient/quiescent/ s/assemenbly/assembly/ Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201104230157.3378023-1-ira.weiny@intel.com
2020-11-04x86/entry: Move nmi entry/exit into common codeThomas Gleixner
Lockdep state handling on NMI enter and exit is nothing specific to X86. It's not any different on other architectures. Also the extra state type is not necessary, irqentry_state_t can carry the necessary information as well. Move it to common code and extend irqentry_state_t to carry lockdep state. [ Ira: Make exit_rcu and lockdep a union as they are mutually exclusive between the IRQ and NMI exceptions, and add kernel documentation for struct irqentry_state_t ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201102205320.1458656-7-ira.weiny@intel.com
2020-11-04Merge branch 'core/urgent' into core/entryThomas Gleixner
Pick up the entry fix before further modifications.
2020-11-04entry: Fix the incorrect ordering of lockdep and RCU checkThomas Gleixner
When an exception/interrupt hits kernel space and the kernel is not currently in the idle task then RCU must be watching. irqentry_enter() validates this via rcu_irq_enter_check_tick(), which in turn invokes lockdep when taking a lock. But at that point lockdep does not yet know about the fact that interrupts have been disabled by the CPU, which triggers a lockdep splat complaining about inconsistent state. Invoking trace_hardirqs_off() before rcu_irq_enter_check_tick() defeats the point of rcu_irq_enter_check_tick() because trace_hardirqs_off() uses RCU. So use the same sequence as for the idle case and tell lockdep about the irq state change first, invoke the RCU check and then do the lockdep and tracer update. Fixes: a5497bab5f72 ("entry: Provide generic interrupt entry/exit code") Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87y2jhl19s.fsf@nanos.tec.linutronix.de
2020-10-29entry: Fixup irqentry_enter() commentIra Weiny
irq_enter_from_user_mode() was changed to irqentry_enter_from_user_mode(). Update the comment within irqentry_enter() to reflect this change. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201028163632.965518-1-ira.weiny@intel.com
2020-10-29entry: Add support for TIF_NOTIFY_SIGNALJens Axboe
Add TIF_NOTIFY_SIGNAL handling in the generic entry code, which if set, will return true if signal_pending() is used in a wait loop. That causes an exit of the loop so that notify_signal tracehooks can be run. If the wait loop is currently inside a system call, the system call is restarted once task_work has been processed. In preparation for only having arch_do_signal() handle syscall restarts if _TIF_SIGPENDING isn't set, rename it to arch_do_signal_or_restart(). Pass in a boolean that tells the architecture specific signal handler if it should attempt to get a signal, or just process a potential syscall restart. For !CONFIG_GENERIC_ENTRY archs, add the TIF_NOTIFY_SIGNAL handling to get_signal(). This is done to minimize the needed architecture changes to support this feature. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Link: https://lore.kernel.org/r/20201026203230.386348-3-axboe@kernel.dk
2020-10-23Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull arch task_work cleanups from Jens Axboe: "Two cleanups that don't fit other categories: - Finally get the task_work_add() cleanup done properly, so we don't have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates all callers, and also fixes up the documentation for task_work_add(). - While working on some TIF related changes for 5.11, this TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch duplication for how that is handled" * tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block: task_work: cleanup notification modes tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
2020-10-18Merge tag 'core-rcu-2020-10-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU changes from Ingo Molnar: - Debugging for smp_call_function() - RT raw/non-raw lock ordering fixes - Strict grace periods for KASAN - New smp_call_function() torture test - Torture-test updates - Documentation updates - Miscellaneous fixes [ This doesn't actually pull the tag - I've dropped the last merge from the RCU branch due to questions about the series. - Linus ] * tag 'core-rcu-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits) smp: Make symbol 'csd_bug_count' static kernel/smp: Provide CSD lock timeout diagnostics smp: Add source and destination CPUs to __call_single_data rcu: Shrink each possible cpu krcp rcu/segcblist: Prevent useless GP start if no CBs to accelerate torture: Add gdb support rcutorture: Allow pointer leaks to test diagnostic code rcutorture: Hoist OOM registry up one level refperf: Avoid null pointer dereference when buf fails to allocate rcutorture: Properly synchronize with OOM notifier rcutorture: Properly set rcu_fwds for OOM handling torture: Add kvm.sh --help and update help message rcutorture: Add CONFIG_PROVE_RCU_LIST to TREE05 torture: Update initrd documentation rcutorture: Replace HTTP links with HTTPS ones locktorture: Make function torture_percpu_rwsem_init() static torture: document --allcpus argument added to the kvm.sh script rcutorture: Output number of elapsed grace periods rcutorture: Remove KCSAN stubs rcu: Remove unused "cpu" parameter from rcu_report_qs_rdp() ...
2020-10-17tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()Jens Axboe
All the callers currently do this, clean it up and move the clearing into tracehook_notify_resume() instead. Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-12Merge tag 'x86_cleanups_for_v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Borislav Petkov: "Misc minor cleanups" * tag 'x86_cleanups_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry: Fix typo in comments for syscall_enter_from_user_mode() x86/resctrl: Fix spelling in user-visible warning messages x86/entry/64: Do not include inst.h in calling.h x86/mpparse: Remove duplicate io_apic.h include
2020-10-09Merge branch 'for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull v5.10 RCU changes from Paul E. McKenney: - Debugging for smp_call_function(). - Strict grace periods for KASAN. The point of this series is to find RCU-usage bugs, so the corresponding new RCU_STRICT_GRACE_PERIOD Kconfig option depends on both DEBUG_KERNEL and RCU_EXPERT, and is further disabled by dfefault. Finally, the help text includes a goodly list of scary caveats. - New smp_call_function() torture test. - Torture-test updates. - Documentation updates. - Miscellaneous fixes. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-09-22x86/entry: Fix typo in comments for syscall_enter_from_user_mode()Kees Cook
Just to help myself and others with finding the correct function names, fix a typo for "usermode" vs "user_mode". Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200919080936.259819-1-keescook@chromium.org
2020-09-14core/entry: Report syscall correctly for trace and auditKees Cook
On v5.8 when doing seccomp syscall rewrites (e.g. getpid into getppid as seen in the seccomp selftests), trace (and audit) correctly see the rewritten syscall on entry and exit: seccomp_bpf-1307 [000] .... 22974.874393: sys_enter: NR 110 (... seccomp_bpf-1307 [000] .N.. 22974.874401: sys_exit: NR 110 = 1304 With mainline we see a mismatched enter and exit (the original syscall is incorrectly visible on entry): seccomp_bpf-1030 [000] .... 21.806766: sys_enter: NR 39 (... seccomp_bpf-1030 [000] .... 21.806767: sys_exit: NR 110 = 1027 When ptrace or seccomp change the syscall, this needs to be visible to trace and audit at that time as well. Update the syscall earlier so they see the correct value. Fixes: d88d59b64ca3 ("core/entry: Respect syscall number rewrites") Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20200912005826.586171-1-keescook@chromium.org
2020-09-04x86/entry: Unbreak 32bit fast syscallThomas Gleixner
Andy reported that the syscall treacing for 32bit fast syscall fails: # ./tools/testing/selftests/x86/ptrace_syscall_32 ... [RUN] SYSEMU [FAIL] Initial args are wrong (nr=224, args=10 11 12 13 14 4289172732) ... [RUN] SYSCALL [FAIL] Initial args are wrong (nr=29, args=0 0 0 0 0 4289172732) The eason is that the conversion to generic entry code moved the retrieval of the sixth argument (EBP) after the point where the syscall entry work runs, i.e. ptrace, seccomp, audit... Unbreak it by providing a split up version of syscall_enter_from_user_mode(). - syscall_enter_from_user_mode_prepare() establishes state and enables interrupts - syscall_enter_from_user_mode_work() runs the entry work Replace the call to syscall_enter_from_user_mode() in the 32bit fast syscall C-entry with the split functions and stick the EBP retrieval between them. Fixes: 27d6b4d14f5c ("x86/entry: Use generic syscall entry function") Reported-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/87k0xdjbtt.fsf@nanos.tec.linutronix.de
2020-08-24rcu: Remove unused __rcu_is_watching() functionPaul E. McKenney
The x86/entry work removed all uses of __rcu_is_watching(), therefore this commit removes it entirely. Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <x86@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-08-21core/entry: Respect syscall number rewritesThomas Gleixner
The transcript of the x86 entry code to the generic version failed to reload the syscall number from ptregs after ptrace and seccomp have run, which both can modify the syscall number in ptregs. It returns the original syscall number instead which is obviously not the right thing to do. Reload the syscall number to fix that. Fixes: 142781e108b1 ("entry: Provide generic syscall entry functionality") Reported-by: Kyle Huey <me@kylehuey.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Kyle Huey <me@kylehuey.com> Tested-by: Kees Cook <keescook@chromium.org> Acked-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/87blj6ifo8.fsf@nanos.tec.linutronix.de
2020-07-26entry: Correct 'noinstr' attributesIngo Molnar
The noinstr attribute is to be specified before the return type in the same way 'inline' is used. Similar cases were recently fixed for x86 in commit 7f6fa101dfac ("x86: Correct noinstr qualifiers"), but the generic entry code was based on the the original version and did not carry the fix over. Fixes: a5497bab5f72 ("entry: Provide generic interrupt entry/exit code") Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200725091951.744848-3-mingo@kernel.org
2020-07-24entry: Provide infrastructure for work before transitioning to guest modeThomas Gleixner
Entering a guest is similar to exiting to user space. Pending work like handling signals, rescheduling, task work etc. needs to be handled before that. Provide generic infrastructure to avoid duplication of the same handling code all over the place. The transfer to guest mode handling is different from the exit to usermode handling, e.g. vs. rseq and live patching, so a separate function is used. The initial list of work items handled is: TIF_SIGPENDING, TIF_NEED_RESCHED, TIF_NOTIFY_RESUME Architecture specific TIF flags can be added via defines in the architecture specific include files. The calling convention is also different from the syscall/interrupt entry functions as KVM invokes this from the outer vcpu_run() loop with interrupts and preemption enabled. To prevent missing a pending work item it invokes a check for pending TIF work from interrupt disabled code right before transitioning to guest mode. The lockdep, RCU and tracing state handling is also done directly around the switch to and from guest mode. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200722220519.833296398@linutronix.de
2020-07-24entry: Provide generic interrupt entry/exit codeThomas Gleixner
Like the syscall entry/exit code interrupt/exception entry after the real low level ASM bits should not be different accross architectures. Provide a generic version based on the x86 code. irqentry_enter() is called after the low level entry code and irqentry_exit() must be invoked right before returning to the low level code which just contains the actual return logic. The code before irqentry_enter() and irqentry_exit() must not be instrumented. Code after irqentry_enter() and before irqentry_exit() can be instrumented. irqentry_enter() invokes irqentry_enter_from_user_mode() if the interrupt/exception came from user mode. If if entered from kernel mode it handles the kernel mode variant of establishing state for lockdep, RCU and tracing depending on the kernel context it interrupted (idle, non-idle). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200722220519.723703209@linutronix.de
2020-07-24entry: Provide generic syscall exit functionThomas Gleixner
Like syscall entry all architectures have similar and pointlessly different code to handle pending work before returning from a syscall to user space. 1) One-time syscall exit work: - rseq syscall exit - audit - syscall tracing - tracehook (single stepping) 2) Preparatory work - Exit to user mode loop (common TIF handling). - Architecture specific one time work arch_exit_to_user_mode_prepare() - Address limit and lockdep checks 3) Final transition (lockdep, tracing, context tracking, RCU). Invokes arch_exit_to_user_mode() to handle e.g. speculation mitigations Provide a generic version based on the x86 code which has all the RCU and instrumentation protections right. Provide a variant for interrupt return to user mode as well which shares the above #2 and #3 work items. After syscall_exit_to_user_mode() and irqentry_exit_to_user_mode() the architecture code just has to return to user space. The code after returning from these functions must not be instrumented. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20200722220519.613977173@linutronix.de
2020-07-24entry: Provide generic syscall entry functionalityThomas Gleixner
On syscall entry certain work needs to be done: - Establish state (lockdep, context tracking, tracing) - Conditional work (ptrace, seccomp, audit...) This code is needlessly duplicated and different in all architectures. Provide a generic version based on the x86 implementation which has all the RCU and instrumentation bits right. As interrupt/exception entry from user space needs parts of the same functionality, provide a function for this as well. syscall_enter_from_user_mode() and irqentry_enter_from_user_mode() must be called right after the low level ASM entry. The calling code must be non-instrumentable. After the functions returns state is correct and the subsequent functions can be instrumented. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20200722220519.513463269@linutronix.de