summaryrefslogtreecommitdiff
path: root/kernel/exit.c
AgeCommit message (Collapse)Author
2007-11-29wait_task_stopped(): pass correct exit_code to wait_noreap_copyout()Scott James Remnant
In wait_task_stopped() exit_code already contains the right value for the si_status member of siginfo, and this is simply set in the non WNOWAIT case. If you call waitid() with a stopped or traced process, you'll get the signal in siginfo.si_status as expected -- however if you call waitid(WNOWAIT) at the same time, you'll get the signal << 8 | 0x7f Pass it unchanged to wait_noreap_copyout(); we would only need to shift it and add 0x7f if we were returning it in the user status field and that isn't used for any function that permits WNOWAIT. Signed-off-by: Scott James Remnant <scott@ubuntu.com> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29wait_task_stopped(): don't use task_pid_nr_ns() locklessOleg Nesterov
wait_task_stopped(WNOWAIT) does task_pid_nr_ns() without tasklist/rcu lock, we can read an already freed memory. Use the cached pid_t value. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Looks-good-to: Roland McGrath <roland@redhat.com> Acked-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-15wait_task_stopped: Check p->exit_state instead of TASK_TRACEDRoland McGrath
The original meaning of the old test (p->state > TASK_STOPPED) was "not dead", since it was before TASK_TRACED existed and before the state/exit_state split. It was a wrong correction in commit 14bf01bb0599c89fc7f426d20353b76e12555308 to make this test for TASK_TRACED instead. It should have been changed when TASK_TRACED was introducted and again when exit_state was introduced. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Kees Cook <kees@ubuntu.com> Acked-by: Scott James Remnant <scott@ubuntu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19Uninline fork.c/exit.cAlexey Dobriyan
Save ~650 bytes here. add/remove: 4/0 grow/shrink: 0/7 up/down: 430/-1088 (-658) function old new delta __copy_fs_struct - 202 +202 __put_fs_struct - 112 +112 __exit_fs - 58 +58 __exit_files - 58 +58 exit_files 58 2 -56 put_fs_struct 112 5 -107 exit_fs 161 2 -159 sys_unshare 774 590 -184 copy_process 4031 3840 -191 do_exit 1791 1597 -194 copy_fs_struct 202 5 -197 No difference in lmbench lat_proc tests on 2-way Opteron 246. Smaaaal degradation on UP P4 (within errors). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19Use helpers to obtain task pid in printksPavel Emelyanov
The task_struct->pid member is going to be deprecated, so start using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in the kernel. The first thing to start with is the pid, printed to dmesg - in this case we may safely use task_pid_nr(). Besides, printks produce more (much more) than a half of all the explicit pid usage. [akpm@linux-foundation.org: git-drm went and changed lots of stuff] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19Isolate the explicit usage of signal->pgrpPavel Emelyanov
The pgrp field is not used widely around the kernel so it is now marked as deprecated with appropriate comment. The initialization of INIT_SIGNALS is trimmed because a) they are set to 0 automatically; b) gcc cannot properly initialize two anonymous (the second one is the one with the session) unions. In this particular case to make it compile we'd have to add some field initialized right before the .pgrp. This is the same patch as the 1ec320afdc9552c92191d5f89fcd1ebe588334ca one (from Cedric), but for the pgrp field. Some progress report: We have to deprecate the pid, tgid, session and pgrp fields on struct task_struct and struct signal_struct. The session and pgrp are already deprecated. The tgid value is close to being such - the worst known usage in in fs/locks.c and audit code. The pid field deprecation is mainly blocked by numerous printk-s around the kernel that print the tsk->pid to log. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: changes to show virtual ids to userPavel Emelyanov
This is the largest patch in the set. Make all (I hope) the places where the pid is shown to or get from user operate on the virtual pids. The idea is: - all in-kernel data structures must store either struct pid itself or the pid's global nr, obtained with pid_nr() call; - when seeking the task from kernel code with the stored id one should use find_task_by_pid() call that works with global pids; - when showing pid's numerical value to the user the virtual one should be used, but however when one shows task's pid outside this task's namespace the global one is to be used; - when getting the pid from userspace one need to consider this as the virtual one and use appropriate task/pid-searching functions. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: yet nuther build fix] [akpm@linux-foundation.org: remove unneeded casts] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: destroy pid namespace on init's deathSukadev Bhattiprolu
Terminate all processes in a namespace when the reaper of the namespace is exiting. We do this by walking the pidmap of the namespace and sending SIGKILL to all processes. Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Acked-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: prepare proc_flust_task() to flush entries from multiple ↵Pavel Emelyanov
proc trees The first part is trivial - we just make the proc_flush_task() to operate on arbitrary vfsmount with arbitrary ids and pass the pid and global proc_mnt to it. The other change is more tricky: I moved the proc_flush_task() call in release_task() higher to address the following problem. When flushing task from many proc trees we need to know the set of ids (not just one pid) to find the dentries' names to flush. Thus we need to pass the task's pid to proc_flush_task() as struct pid is the only object that can provide all the pid numbers. But after __exit_signal() task has detached all his pids and this information is lost. This creates a tiny gap for proc_pid_lookup() to bring some dentries back to tree and keep them in hash (since pids are still alive before __exit_signal()) till the next shrink, but since proc_flush_task() does not provide a 100% guarantee that the dentries will be flushed, this is OK to do so. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: move exit_task_namespaces()Pavel Emelyanov
Make task release its namespaces after it has reparented all his children to child_reaper, but before it notifies its parent about its death. The reason to release namespaces after reparenting is that when task exits it may send a signal to its parent (SIGCHLD), but if the parent has already exited its namespaces there will be no way to decide what pid to dever to him - parent can be from different namespace. The reason to release namespace before notifying the parent it that when task sends a SIGCHLD to parent it can call wait() on this taks and release it. But releasing the mnt namespace implies dropping of all the mounts in the mnt namespace and NFS expects the task to have valid sighand pointer. Thanks to Oleg for pointing out some races that can apear and helping with patches and fixes. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: rework forget_original_parent()Oleg Nesterov
A pid namespace is a "view" of a particular set of tasks on the system. They work in a similar way to filesystem namespaces. A file (or a process) can be accessed in multiple namespaces, but it may have a different name in each. In a filesystem, this name might be /etc/passwd in one namespace, but /chroot/etc/passwd in another. For processes, a process may have pid 1234 in one namespace, but be pid 1 in another. This allows new pid namespaces to have basically arbitrary pids, and not have to worry about what pids exist in other namespaces. This is essential for checkpoint/restart where a restarted process's pid might collide with an existing process on the system's pid. In this particular implementation, pid namespaces have a parent-child relationship, just like processes. A process in a pid namespace may see all of the processes in the same namespace, as well as all of the processes in all of the namespaces which are children of its namespace. Processes may not, however, see others which are in their parent's namespace, but not in their own. The same goes for sibling namespaces. The know issue to be solved in the nearest future is signal handling in the namespace boundary. That is, currently the namespace's init is treated like an ordinary task that can be killed from within an namespace. Ideally, the signal handling by the namespace's init should have two sides: when signaling the init from its namespace, the init should look like a real init task, i.e. receive only those signals, that is explicitly wants to; when signaling the init from one of the parent namespaces, init should look like an ordinary task, i.e. receive any signal, only taking the general permissions into account. The pid namespace was developed by Pavel Emlyanov and Sukadev Bhattiprolu and we eventually came to almost the same implementation, which differed in some details. This set is based on Pavel's patches, but it includes comments and patches that from Sukadev. Many thanks to Oleg, who reviewed the patches, pointed out many BUGs and made valuable advises on how to make this set cleaner. This patch: We have to call exit_task_namespaces() only after the exiting task has reparented all his children and is sure that no other threads will reparent theirs for it. Why this is needed is explained in appropriate patch. This one only reworks the forget_original_parent() so that after calling this a task cannot be/become parent of any other task. We check PF_EXITING instead of ->exit_state while choosing the new parent. Note that tasklits_lock acts as a barrier, everyone who takes tasklist after us (when forget_original_parent() drops it) must see PF_EXITING. The other changes are just cleanups. They just move some code from exit_notify to forget_original_parent(). It is a bit silly to declare ptrace_dead in exit_notify(), take tasklist, pass ptrace_dead to forget_original_parent(), unlock-lock-unlock tasklist, and then use ptrace_dead. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19whitespace fixes: task exit handlingDaniel Walker
Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19kernel/exit.c: Use list_for_each_entry(_safe) instead of list_for_each(_safe)Matthias Kaehlcke
kernel/exit.c: Convert list_for_each(_safe) to list_for_each_entry(_safe) in forget_original_parent(), exit_notify() and do_wait() Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19Make access to task's nsproxy lighterPavel Emelyanov
When someone wants to deal with some other taks's namespaces it has to lock the task and then to get the desired namespace if the one exists. This is slow on read-only paths and may be impossible in some cases. E.g. Oleg recently noticed a race between unshare() and the (sent for review in cgroups) pid namespaces - when the task notifies the parent it has to know the parent's namespace, but taking the task_lock() is impossible there - the code is under write locked tasklist lock. On the other hand switching the namespace on task (daemonize) and releasing the namespace (after the last task exit) is rather rare operation and we can sacrifice its speed to solve the issues above. The access to other task namespaces is proposed to be performed like this: rcu_read_lock(); nsproxy = task_nsproxy(tsk); if (nsproxy != NULL) { / * * work with the namespaces here * e.g. get the reference on one of them * / } / * * NULL task_nsproxy() means that this task is * almost dead (zombie) * / rcu_read_unlock(); This patch has passed the review by Eric and Oleg :) and, of course, tested. [clg@fr.ibm.com: fix unshare()] [ebiederm@xmission.com: Update get_net_ns_by_pid] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: define is_global_init() and is_container_init()Serge E. Hallyn
is_init() is an ambiguous name for the pid==1 check. Split it into is_global_init() and is_container_init(). A cgroup init has it's tsk->pid == 1. A global init also has it's tsk->pid == 1 and it's active pid namespace is the init_pid_ns. But rather than check the active pid namespace, compare the task structure with 'init_pid_ns.child_reaper', which is initialized during boot to the /sbin/init process and never changes. Changelog: 2.6.22-rc4-mm2-pidns1: - Use 'init_pid_ns.child_reaper' to determine if a given task is the global init (/sbin/init) process. This would improve performance and remove dependence on the task_pid(). 2.6.21-mm2-pidns2: - [Sukadev Bhattiprolu] Changed is_container_init() calls in {powerpc, ppc,avr32}/traps.c for the _exception() call to is_global_init(). This way, we kill only the cgroup if the cgroup's init has a bug rather than force a kernel panic. [akpm@linux-foundation.org: fix comment] [sukadev@us.ibm.com: Use is_global_init() in arch/m32r/mm/fault.c] [bunk@stusta.de: kernel/pid.c: remove unused exports] [sukadev@us.ibm.com: Fix capability.c to work with threaded init] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Acked-by: Pavel Emelianov <xemul@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Herbert Poetzel <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: rename child_reaper() functionSukadev Bhattiprolu
Rename the child_reaper() function to task_child_reaper() to be similar to other task_* functions and to distinguish the function from 'struct pid_namspace.child_reaper'. Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Herbert Poetzel <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: round up the APIPavel Emelianov
The set of functions process_session, task_session, process_group and task_pgrp is confusing, as the names can be mixed with each other when looking at the code for a long time. The proposals are to * equip the functions that return the integer with _nr suffix to represent that fact, * and to make all functions work with task (not process) by making the common prefix of the same name. For monotony the routines signal_session() and set_signal_session() are replaced with task_session_nr() and set_task_session(), especially since they are only used with the explicit task->signal dereference. Signed-off-by: Pavel Emelianov <xemul@openvz.org> Acked-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19Task Control Groups: make cpusets a client of cgroupsPaul Menage
Remove the filesystem support logic from the cpusets system and makes cpusets a cgroup subsystem The "cpuset" filesystem becomes a dummy filesystem; attempts to mount it get passed through to the cgroup filesystem with the appropriate options to emulate the old cpuset filesystem behaviour. Signed-off-by: Paul Menage <menage@google.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19Task Control Groups: add fork()/exit() hooksPaul Menage
This adds the necessary hooks to the fork() and exit() paths to ensure that new children inherit their parent's cgroup assignments, and that exiting processes release reference counts on their cgroups. Signed-off-by: Paul Menage <menage@google.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Shrink task_struct if CONFIG_FUTEX=nAlexey Dobriyan
robust_list, compat_robust_list, pi_state_list, pi_state_cache are really used if futexes are on. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17exec: RT sub-thread can livelock and monopolize CPU on execOleg Nesterov
de_thread() yields waiting for ->group_leader to be a zombie. This deadlocks if an rt-prio execer shares the same cpu with ->group_leader. Change the code to use ->group_exit_task/notify_count mechanics. This patch certainly uglifies the code, perhaps someone can suggest something better. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17wait_task_stopped/continued: remove unneeded p->signal != NULL checkOleg Nesterov
The child was found on ->children list under tasklist_lock, it must have a valid ->signal. __exit_signal() both removes the task from parent->children and clears ->signal "atomically" under write_lock(tasklist). Remove unneeded checks. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17wait_task_zombie: don't fight with non-existing race with a dying ptraceeOleg Nesterov
The "p->exit_signal == -1 && p->ptrace == 0" check and the comment are bogus. We already did exactly the same check in eligible_child(), we did not drop tasklist_lock since then, and both variables need write_lock(tasklist) to be changed. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17exit_notify: don't take tasklist for TIF_SIGPENDING re-targetingOleg Nesterov
->siglock provides enough protection to iterate over the thread group. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17wait_task_zombie: fix 2/3 races vs forget_original_parent()Oleg Nesterov
Two threads, T1 and T2. T2 ptraces P, and P is not a child of ptracer's thread group. P exits and goes to TASK_ZOMBIE. T1 does wait_task_zombie(P): P->exit_state = TASK_DEAD; ... read_unlock(&tasklist_lock); T2 does exit(), takes tasklist, forget_original_parent() does __ptrace_unlink(P) but doesn't call do_notify_parent(P) because p->exit_state == EXIT_DEAD. Now, P is not visible to our process: __ptrace_unlink() removed it from ->children. We should send notification to P->parent and release P if and only if SIGCHLD is ignored. And we have 3 bugs: 1. P->parent does do_wait() and gets -ECHILD (P is on ->parent->children, but its state is TASK_DEAD). 2. // wait_task_zombie() continues if (put_user(...)) { // TODO: is this safe? p->exit_state = EXIT_ZOMBIE; return; } we return without notification/release, task_struct leaked. Solution: ignore -EFAULT and proceed. It is an application's bug if we can't fill infop/stat_addr (in case of VM_FAULT_OOM we have much more problems). 3. // wait_task_zombie() continues if (p->real_parent != p->parent) { // Not taken, it was untraced'ed ... } release_task(p); we released the task which we shouldn't. Solution: check ->real_parent != ->parent before, under tasklist_lock, but use ptrace_unlink() instead of __ptrace_unlink() to check ->ptrace. This patch hopefully solves 2 and 3, the 1st bug will be fixed later, we need some cleanups in forget_original_parent/reparent_thread. However, the first race is very unlikely and not critical, so I hope it makes sense to fix 1 and 2 for now. 4. Small cleanup: don't "restore" EXIT_ZOMBIE unless we know we are not going to realease the child. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17wait_task_zombie: remove unneeded child->signal checkOleg Nesterov
A zombie must have a valid ->signal, we are going to release it and __exit_signal() starts with BUG_ON(!sig). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17handle the multi-threaded init's exit() properlyOleg Nesterov
With or without this patch, multi-threaded init's are not fully supported, but do_exit() is completely wrong. This becomes a real problem when we support pid namespaces. 1. do_exit() panics when the main thread of /sbin/init exits. It should not until the whole thread group exits. Move the code below, under the "if (group_dead)" check. Note: this means that forget_original_parent() can use an already dead child_reaper()'s task_struct. This is OK for /sbin/init because - do_wait() from alive sub-thread still can reap a zombie, we iterate over all sub-thread's ->children lists - do_notify_parent() will wakeup some alive sub-thread because it sends the group-wide signal However, we should remove choose_new_parent()->BUG_ON(reaper->exit_state) for this. 2. We are playing games with ->nsproxy->pid_ns. This code is bogus today, and it has to be changed anyway when we really support pid namespaces, just remove it. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Roland McGrath <roland@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17pi-futex: set PF_EXITING without taking ->pi_lockOleg Nesterov
It is a bit annoying that do_exit() takes ->pi_lock to set PF_EXITING. All we need is to synchronize with lookup_pi_state() which saw this task without PF_EXITING under ->pi_lock. Change do_exit() to use spin_unlock_wait(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Clean up duplicate includes in kernel/Jesper Juhl
This patch cleans up duplicate includes in kernel/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Satyam Sharma <ssatyam@cse.iitk.ac.in> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15sched: guest CPU accounting: add guest-CPU /proc/<pid>/stat fieldsLaurent Vivier
like for cpustat, introduce the "gtime" (guest time of the task) and "cgtime" (guest time of the task children) fields for the tasks. Modify signal_struct and task_struct. Modify /proc/<pid>/stat to display these new fields. Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Acked-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-20signalfd simplificationDavide Libenzi
This simplifies signalfd code, by avoiding it to remain attached to the sighand during its lifetime. In this way, the signalfd remain attached to the sighand only during poll(2) (and select and epoll) and read(2). This also allows to remove all the custom "tsk == current" checks in kernel/signal.c, since dequeue_signal() will only be called by "current". I think this is also what Ben was suggesting time ago. The external effect of this, is that a thread can extract only its own private signals and the group ones. I think this is an acceptable behaviour, in that those are the signals the thread would be able to fetch w/out signalfd. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31Assign task_struct.exit_code before taskstats_exit()Jonathan Lim
taskstats.ac_exitcode is assigned to task_struct.exit_code in bacct_add_tsk() through the following kernel function calls: do_exit() taskstats_exit() fill_pid() bacct_add_tsk() The problem is that in do_exit(), task_struct.exit_code is set to 'code' only after taskstats_exit() has been called. So we need to move the assignment before taskstats_exit(). Signed-off-by: Jonathan Lim <jlim@sgi.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-03Kill some obsolete sub-thread-ptrace stuffOleg Nesterov
There is a couple of subtle checks which were needed to handle ptracing from the same thread group. This was deprecated a long ago, imho this code just complicates the understanding. And, the "->parent->signal->flags & SIGNAL_GROUP_EXIT" check in exit_notify() is not right. SIGNAL_GROUP_EXIT can mean exec(), not exit_group(). This means ptracer can lose a ptraced zombie on exec(). Minor problem, but still the bug. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19Freezer: avoid freezing kernel threads prematurelyRafael J. Wysocki
Kernel threads should not have TIF_FREEZE set when user space processes are being frozen, since otherwise some of them might be frozen prematurely. To prevent this from happening we can (1) make exit_mm() unset TIF_FREEZE unconditionally just after clearing tsk->mm and (2) make try_to_freeze_tasks() check if p->mm is different from zero and PF_BORROWED_MM is unset in p->flags when user space processes are to be frozen. Namely, when user space processes are being frozen, we only should set TIF_FREEZE for tasks that have p->mm different from NULL and don't have PF_BORROWED_MM set in p->flags. For this reason task_lock() must be used to prevent try_to_freeze_tasks() from racing with use_mm()/unuse_mm(), in which p->mm and p->flags.PF_BORROWED_MM are changed under task_lock(p). Also, we need to prevent the following scenario from happening: * daemonize() is called by a task spawned from a user space code path * freezer checks if the task has p->mm set and the result is positive * task enters exit_mm() and clears its TIF_FREEZE * freezer sets TIF_FREEZE for the task * task calls try_to_freeze() and goes to the refrigerator, which is wrong at that point This requires us to acquire task_lock(p) before p->flags.PF_BORROWED_MM and p->mm are examined and release it after TIF_FREEZE is set for p (or it turns out that TIF_FREEZE should not be set). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17Freezer: make kernel threads nonfreezable by defaultRafael J. Wysocki
Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16Audit: add TTY input auditingMiloslav Trmac
Add TTY input auditing, used to audit system administrator's actions. This is required by various security standards such as DCID 6/3 and PCI to provide non-repudiation of administrator's actions and to allow a review of past actions if the administrator seems to overstep their duties or if the system becomes misconfigured for unknown reasons. These requirements do not make it necessary to audit TTY output as well. Compared to an user-space keylogger, this approach records TTY input using the audit subsystem, correlated with other audit events, and it is completely transparent to the user-space application (e.g. the console ioctls still work). TTY input auditing works on a higher level than auditing all system calls within the session, which would produce an overwhelming amount of mostly useless audit events. Add an "audit_tty" attribute, inherited across fork (). Data read from TTYs by process with the attribute is sent to the audit subsystem by the kernel. The audit netlink interface is extended to allow modifying the audit_tty attribute, and to allow sending explanatory audit events from user-space (for example, a shell might send an event containing the final command, after the interactive command-line editing and history expansion is performed, which might be difficult to decipher from the TTY input alone). Because the "audit_tty" attribute is inherited across fork (), it would be set e.g. for sshd restarted within an audited session. To prevent this, the audit_tty attribute is cleared when a process with no open TTY file descriptors (e.g. after daemon startup) opens a TTY. See https://www.redhat.com/archives/linux-audit/2007-June/msg00000.html for a more detailed rationale document for an older version of this patch. [akpm@linux-foundation.org: build fix] Signed-off-by: Miloslav Trmac <mitr@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16Add generic exit-time stack-depth checking to CONFIG_DEBUG_STACK_USAGEJeff Dike
Add generic exit-time stack-depth checking to CONFIG_DEBUG_STACK_USAGE. This also adds UML support. Tested on UML and i386. [akpm@linux-foundation.org: cleanups, speedups, tweaks] Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-09sched: update delay-accounting to use CFS's precise statsBalbir Singh
update delay-accounting to use CFS's precise stats. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09sched: clean up the rt priority macrosIngo Molnar
clean up the rt priority macros, pointed out by Andrew Morton. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-09sched: remove sched_exit()Ingo Molnar
remove sched_exit(): the elaborate dance of us trying to recover timeslices given to child tasks never really worked. CFS does not need it either. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-06-08pi-futex: fix exit races and locking problemsAlexey Kuznetsov
1. New entries can be added to tsk->pi_state_list after task completed exit_pi_state_list(). The result is memory leakage and deadlocks. 2. handle_mm_fault() is called under spinlock. The result is obvious. 3. results in self-inflicted deadlock inside glibc. Sometimes futex_lock_pi returns -ESRCH, when it is not expected and glibc enters to for(;;) sleep() to simulate deadlock. This problem is quite obvious and I think the patch is right. Though it looks like each "if" in futex_lock_pi() got some stupid special case "else if". :-) 4. sometimes futex_lock_pi() returns -EDEADLK, when nobody has the lock. The reason is also obvious (see comment in the patch), but correct fix is far beyond my comprehension. I guess someone already saw this, the chunk: if (rt_mutex_trylock(&q.pi_state->pi_mutex)) ret = 0; is obviously from the same opera. But it does not work, because the rtmutex is really taken at this point: wake_futex_pi() of previous owner reassigned it to us. My fix works. But it looks very stupid. I would think about removal of shift of ownership in wake_futex_pi() and making all the work in context of process taking lock. From: Thomas Gleixner <tglx@linutronix.de> Fix 1) Avoid the tasklist lock variant of the exit race fix by adding an additional state transition to the exit code. This fixes also the issue, when a task with recursive segfaults is not able to release the futexes. Fix 2) Cleanup the lookup_pi_state() failure path and solve the -ESRCH problem finally. Fix 3) Solve the fixup_pi_state_owner() problem which needs to do the fixup in the lock protected section by using the in_atomic userspace access functions. This removes also the ugly lock drop / unqueue inside of fixup_pi_state() Fix 4) Fix a stale lock in the error path of futex_wake_pi() Added some error checks for verification. The -EDEADLK problem is solved by the rtmutex fixups. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23recalc_sigpending_tsk fixesRoland McGrath
Steve Hawkes discovered a problem where recalc_sigpending_tsk was called in do_sigaction but no signal_wake_up call was made, preventing later signals from waking up blocked threads with TIF_SIGPENDING already set. In fact, the few other calls to recalc_sigpending_tsk outside the signals code are also subject to this problem in other race conditions. This change makes recalc_sigpending_tsk private to the signals code. It changes the outside calls, as well as do_sigaction, to use the new recalc_sigpending_and_wake instead. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: <Steve.Hawkes@motorola.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11signal/timer/event: signalfd coreDavide Libenzi
This patch series implements the new signalfd() system call. I took part of the original Linus code (and you know how badly it can be broken :), and I added even more breakage ;) Signals are fetched from the same signal queue used by the process, so signalfd will compete with standard kernel delivery in dequeue_signal(). If you want to reliably fetch signals on the signalfd file, you need to block them with sigprocmask(SIG_BLOCK). This seems to be working fine on my Dual Opteron machine. I made a quick test program for it: http://www.xmailserver.org/signafd-test.c The signalfd() system call implements signal delivery into a file descriptor receiver. The signalfd file descriptor if created with the following API: int signalfd(int ufd, const sigset_t *mask, size_t masksize); The "ufd" parameter allows to change an existing signalfd sigmask, w/out going to close/create cycle (Linus idea). Use "ufd" == -1 if you want a brand new signalfd file. The "mask" allows to specify the signal mask of signals that we are interested in. The "masksize" parameter is the size of "mask". The signalfd fd supports the poll(2) and read(2) system calls. The poll(2) will return POLLIN when signals are available to be dequeued. As a direct consequence of supporting the Linux poll subsystem, the signalfd fd can use used together with epoll(2) too. The read(2) system call will return a "struct signalfd_siginfo" structure in the userspace supplied buffer. The return value is the number of bytes copied in the supplied buffer, or -1 in case of error. The read(2) call can also return 0, in case the sighand structure to which the signalfd was attached, has been orphaned. The O_NONBLOCK flag is also supported, and read(2) will return -EAGAIN in case no signal is available. If the size of the buffer passed to read(2) is lower than sizeof(struct signalfd_siginfo), -EINVAL is returned. A read from the signalfd can also return -ERESTARTSYS in case a signal hits the process. The format of the struct signalfd_siginfo is, and the valid fields depends of the (->code & __SI_MASK) value, in the same way a struct siginfo would: struct signalfd_siginfo { __u32 signo; /* si_signo */ __s32 err; /* si_errno */ __s32 code; /* si_code */ __u32 pid; /* si_pid */ __u32 uid; /* si_uid */ __s32 fd; /* si_fd */ __u32 tid; /* si_fd */ __u32 band; /* si_band */ __u32 overrun; /* si_overrun */ __u32 trapno; /* si_trapno */ __s32 status; /* si_status */ __s32 svint; /* si_int */ __u64 svptr; /* si_ptr */ __u64 utime; /* si_utime */ __u64 stime; /* si_stime */ __u64 addr; /* si_addr */ }; [akpm@linux-foundation.org: fix signalfd_copyinfo() on i386] Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11attach_pid() with struct pid parameterSukadev Bhattiprolu
attach_pid() currently takes a pid_t and then uses find_pid() to find the corresponding struct pid. Sometimes we already have the struct pid. We can then skip find_pid() if attach_pid() were to take a struct pid parameter. Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: <containers@lists.osdl.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11getrusage(): fill ru_inblock and ru_oublock fields if possibleEric Dumazet
If CONFIG_TASK_IO_ACCOUNTING is defined, we update io accounting counters for each task. This patch permits reporting of values using the well known getrusage() syscall, filling ru_inblock and ru_oublock instead of null values. As TASK_IO_ACCOUNTING currently counts bytes counts, we approximate blocks count doing : nr_blocks = nr_bytes / 512 Example of use : ---------------------- After patch is applied, /usr/bin/time command can now give a good approximation of IO that the process had to do. $ /usr/bin/time grep tototo /usr/include/* Command exited with non-zero status 1 0.00user 0.02system 0:02.11elapsed 1%CPU (0avgtext+0avgdata 0maxresident)k 24288inputs+0outputs (0major+259minor)pagefaults 0swaps $ /usr/bin/time dd if=/dev/zero of=/tmp/testfile count=1000 1000+0 enregistrements lus 1000+0 enregistrements écrits 512000 octets (512 kB) copiés, 0,00326601 seconde, 157 MB/s 0.00user 0.00system 0:00.00elapsed 80%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+3000outputs (0major+299minor)pagefaults 0swaps Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09change kernel threads to ignore signals instead of blocking themOleg Nesterov
Currently kernel threads use sigprocmask(SIG_BLOCK) to protect against signals. This doesn't prevent the signal delivery, this only blocks signal_wake_up(). Every "killall -33 kthreadd" means a "struct siginfo" leak. Change kthreadd_setup() to set all handlers to SIG_IGN instead of blocking them (make a new helper ignore_signals() for that). If the kernel thread needs some signal, it should use allow_signal() anyway, and in that case it should not use CLONE_SIGHAND. Note that we can't change daemonize() (should die!) in the same way, because it can be used along with CLONE_SIGHAND. This means that allow_signal() still should unblock the signal to work correctly with daemonize()ed threads. However, disallow_signal() doesn't block the signal any longer but ignores it. NOTE: with or without this patch the kernel threads are not protected from handle_stop_signal(), this seems harmless, but not good. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09Change reparent_to_init to reparent_to_kthreaddEric W. Biederman
When a kernel thread calls daemonize, instead of reparenting the thread to init reparent the thread to kthreadd next to the threads created by kthread_create. This is really just a stop gap until daemonize goes away, but it does ensure no kernel threads are under init and they are all in one place that is easy to find. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07Return EPERM not ECHILD on security_task_wait failureRoland McGrath
wait* syscalls return -ECHILD even when an individual PID of a live child was requested explicitly, when security_task_wait denies the operation. This means that something like a broken SELinux policy can produce an unexpected failure that looks just like a bug with wait or ptrace or something. This patch makes do_wait return -EACCES (or other appropriate error returned from security_task_wait() instead of -ECHILD if some children were ruled out solely because security_task_wait failed. [jmorris@namei.org: switch error code to EACCES] Signed-off-by: Roland McGrath <roland@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Cc: Chris Wright <chrisw@sous-sol.org> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-29[PATCH] pid: Properly detect orphaned process groups in exit_notifyEric W. Biederman
In commit 0475ac0845f9295bc5f69af45f58dff2c104c8d1 when converting the orphaned process group handling to use struct pid I made a small mistake. I accidentally replaced an == with a !=. Besides just being a dumb thing to do apparently this has a bad side effect. The improper orphaned process group detection causes kwin to die after a suspend/resume cycle. I'm amazed this patch has been around as long as it has without anyone else noticing something funny going on. And the following people deserve credit for spotting and helping to reproduce this. Thanks to: Sid Boyce <g3vbv@blueyonder.co.uk> Thanks to: "Michael Wu" Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>