summaryrefslogtreecommitdiff
path: root/kernel/fork.c
AgeCommit message (Collapse)Author
2022-05-01mm: Fix PASID use-after-free issueFenghua Yu
The PASID is being freed too early. It needs to stay around until after device drivers that might be using it have had a chance to clear it out of the hardware. The relevant refcounts are: mmget() /mmput() refcount the mm's address space mmgrab()/mmdrop() refcount the mm itself The PASID is currently tied to the life of the mm's address space and freed in __mmput(). This makes logical sense because the PASID can't be used once the address space is gone. But, this misses an important point: even after the address space is gone, the PASID will still be programmed into a device. Device drivers might, for instance, still need to flush operations that are outstanding and need to use that PASID. They do this at file->release() time. Device drivers call the IOMMU driver to hold a reference on the mm itself and drop it at file->release() time. But, the IOMMU driver holds a reference on the mm itself, not the address space. The address space (and the PASID) is long gone by the time the driver tries to clean up. This is effectively a use-after-free bug on the PASID. To fix this, move the PASID free operation from __mmput() to __mmdrop(). This ensures that the IOMMU driver's existing mmgrab() keeps the PASID allocated until it drops its mm reference. Fixes: 701fac40384f ("iommu/sva: Assign a PASID to mm on PASID allocation and free it on mm exit") Reported-by: Zhangfei Gao <zhangfei.gao@foxmail.com> Suggested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Suggested-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Zhangfei Gao <zhangfei.gao@foxmail.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Link: https://lore.kernel.org/r/20220428180041.806809-1-fenghua.yu@intel.com
2022-03-24kasan, arm64: reset pointer tags of vmapped stacksAndrey Konovalov
Once tag-based KASAN modes start tagging vmalloc() allocations, kernel stacks start getting tagged if CONFIG_VMAP_STACK is enabled. Reset the tag of kernel stack pointers after allocation in arch_alloc_vmap_stack(). For SW_TAGS KASAN, when CONFIG_KASAN_STACK is enabled, the instrumentation can't handle the SP register being tagged. For HW_TAGS KASAN, there's no instrumentation-related issues. However, the impact of having a tagged SP register needs to be properly evaluated, so keep it non-tagged for now. Note, that the memory for the stack allocation still gets tagged to catch vmalloc-into-stack out-of-bounds accesses. [andreyknvl@google.com: fix case when a stack is retrieved from cached_stacks] Link: https://lkml.kernel.org/r/f50c5f96ef896d7936192c888b0c0a7674e33184.1644943792.git.andreyknvl@google.com [dan.carpenter@oracle.com: remove unnecessary check in alloc_thread_stack_node()] Link: https://lkml.kernel.org/r/20220301080706.GB17208@kili Link: https://lkml.kernel.org/r/698c5ab21743c796d46c15d075b9481825973e34.1643047180.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marco Elver <elver@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24kasan, fork: reset pointer tags of vmapped stacksAndrey Konovalov
Once tag-based KASAN modes start tagging vmalloc() allocations, kernel stacks start getting tagged if CONFIG_VMAP_STACK is enabled. Reset the tag of kernel stack pointers after allocation in alloc_thread_stack_node(). For SW_TAGS KASAN, when CONFIG_KASAN_STACK is enabled, the instrumentation can't handle the SP register being tagged. For HW_TAGS KASAN, there's no instrumentation-related issues. However, the impact of having a tagged SP register needs to be properly evaluated, so keep it non-tagged for now. Note, that the memory for the stack allocation still gets tagged to catch vmalloc-into-stack out-of-bounds accesses. Link: https://lkml.kernel.org/r/c6c96f012371ecd80e1936509ebcd3b07a5956f7.1643047180.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Acked-by: Marco Elver <elver@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24Merge tag 'net-next-5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...
2022-03-22Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Alexei Starovoitov says: ==================== pull-request: bpf-next 2022-03-21 v2 We've added 137 non-merge commits during the last 17 day(s) which contain a total of 143 files changed, 7123 insertions(+), 1092 deletions(-). The main changes are: 1) Custom SEC() handling in libbpf, from Andrii. 2) subskeleton support, from Delyan. 3) Use btf_tag to recognize __percpu pointers in the verifier, from Hao. 4) Fix net.core.bpf_jit_harden race, from Hou. 5) Fix bpf_sk_lookup remote_port on big-endian, from Jakub. 6) Introduce fprobe (multi kprobe) _without_ arch bits, from Masami. The arch specific bits will come later. 7) Introduce multi_kprobe bpf programs on top of fprobe, from Jiri. 8) Enable non-atomic allocations in local storage, from Joanne. 9) Various var_off ptr_to_btf_id fixed, from Kumar. 10) bpf_ima_file_hash helper, from Roberto. 11) Add "live packet" mode for XDP in BPF_PROG_RUN, from Toke. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (137 commits) selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" bpftool: Fix a bug in subskeleton code generation bpf: Fix bpf_prog_pack when PMU_SIZE is not defined bpf: Fix bpf_prog_pack for multi-node setup bpf: Fix warning for cast from restricted gfp_t in verifier bpf, arm: Fix various typos in comments libbpf: Close fd in bpf_object__reuse_map bpftool: Fix print error when show bpf map bpf: Fix kprobe_multi return probe backtrace Revert "bpf: Add support to inline bpf_get_func_ip helper on x86" bpf: Simplify check in btf_parse_hdr() selftests/bpf/test_lirc_mode2.sh: Exit with proper code bpf: Check for NULL return from bpf_get_btf_vmlinux selftests/bpf: Test skipping stacktrace bpf: Adjust BPF stack helper functions to accommodate skip > 0 bpf: Select proper size for bpf_prog_pack ... ==================== Link: https://lore.kernel.org/r/20220322050159.5507-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21Merge tag 'core-core-2022-03-21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core process handling RT latency updates from Thomas Gleixner: - Reduce the amount of work to release a task stack in context switch. There is no real reason to do cgroup accounting and memory freeing in this performance sensitive context. Aside of this the invoked functions cannot be called from this preemption disabled context on PREEMPT_RT enabled kernels. Solve this by moving the accounting into do_exit() and delaying the freeing of the stack unless the vmap stack can be cached. - Provide a mechanism to delay raising signals from atomic context on PREEMPT_RT enabled kernels as sighand::lock cannot be acquired. Store the information in the task struct and raise it in the exit path. * tag 'core-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: signal, x86: Delay calling signals in atomic on RT enabled kernels fork: Use IS_ENABLED() in account_kernel_stack() fork: Only cache the VMAP stack in finish_task_switch() fork: Move task stack accounting to do_exit() fork: Move memcg_charge_kernel_stack() into CONFIG_VMAP_STACK fork: Don't assign the stack pointer in dup_task_struct() fork, IA64: Provide alloc_thread_stack_node() for IA64 fork: Duplicate task_struct before stack allocation fork: Redo ifdefs around task stack handling
2022-03-21Merge tag 'x86-pasid-2022-03-21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 PASID support from Thomas Gleixner: "Reenable ENQCMD/PASID support: - Simplify the PASID handling to allocate the PASID once, associate it to the mm of a process and free it on mm_exit(). The previous attempt of refcounted PASIDs and dynamic alloc()/free() turned out to be error prone and too complex. The PASID space is 20bits, so the case of resource exhaustion is a pure academic concern. - Populate the PASID MSR on demand via #GP to avoid racy updates via IPIs. - Reenable ENQCMD and let objtool check for the forbidden usage of ENQCMD in the kernel. - Update the documentation for Shared Virtual Addressing accordingly" * tag 'x86-pasid-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/x86: Update documentation for SVA (Shared Virtual Addressing) tools/objtool: Check for use of the ENQCMD instruction in the kernel x86/cpufeatures: Re-enable ENQCMD x86/traps: Demand-populate PASID MSR via #GP sched: Define and initialize a flag to identify valid PASID in the task x86/fpu: Clear PASID when copying fpstate iommu/sva: Assign a PASID to mm on PASID allocation and free it on mm exit kernel/fork: Initialize mm's PASID iommu/ioasid: Introduce a helper to check for valid PASIDs mm: Change CONFIG option for mm->pasid field iommu/sva: Rename CONFIG_IOMMU_SVA_LIB to CONFIG_IOMMU_SVA
2022-03-17rethook: Add a generic return hookMasami Hiramatsu
Add a return hook framework which hooks the function return. Most of the logic came from the kretprobe, but this is independent from kretprobe. Note that this is expected to be used with other function entry hooking feature, like ftrace, fprobe, adn kprobes. Eventually this will replace the kretprobe (e.g. kprobe + rethook = kretprobe), but at this moment, this is just an additional hook. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/164735285066.1084943.9259661137330166643.stgit@devnote2
2022-03-05mm: refactor vm_area_struct::anon_vma_name usage codeSuren Baghdasaryan
Avoid mixing strings and their anon_vma_name referenced pointers by using struct anon_vma_name whenever possible. This simplifies the code and allows easier sharing of anon_vma_name structures when they represent the same name. [surenb@google.com: fix comment] Link: https://lkml.kernel.org/r/20220223153613.835563-1-surenb@google.com Link: https://lkml.kernel.org/r/20220224231834.1481408-1-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Suggested-by: Matthew Wilcox <willy@infradead.org> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Colin Cross <ccross@google.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Alexey Gladkov <legion@kernel.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Chris Hyser <chris.hyser@oracle.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Collingbourne <pcc@google.com> Cc: Xiaofeng Cao <caoxiaofeng@yulong.com> Cc: David Hildenbrand <david@redhat.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-02-22fork: Use IS_ENABLED() in account_kernel_stack()Sebastian Andrzej Siewior
Not strickly needed but checking CONFIG_VMAP_STACK instead of task_stack_vm_area()' result allows the compiler the remove the else path in the CONFIG_VMAP_STACK case where the pointer can't be NULL. Check for CONFIG_VMAP_STACK in order to use the proper path. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-9-bigeasy@linutronix.de
2022-02-22fork: Only cache the VMAP stack in finish_task_switch()Sebastian Andrzej Siewior
The task stack could be deallocated later, but for fork()/exec() kind of workloads (say a shell script executing several commands) it is important that the stack is released in finish_task_switch() so that in VMAP_STACK case it can be cached and reused in the new task. For PREEMPT_RT it would be good if the wake-up in vfree_atomic() could be avoided in the scheduling path. Far worse are the other free_thread_stack() implementations which invoke __free_pages()/ kmem_cache_free() with disabled preemption. Cache the stack in free_thread_stack() in the VMAP_STACK case and RCU-delay the free path otherwise. Free the stack in the RCU callback. In the VMAP_STACK case this is another opportunity to fill the cache. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-8-bigeasy@linutronix.de
2022-02-22fork: Move task stack accounting to do_exit()Sebastian Andrzej Siewior
There is no need to perform the stack accounting of the outgoing task in its final schedule() invocation which happens with preemption disabled. The task is leaving, the resources will be freed and the accounting can happen in do_exit() before the actual schedule invocation which frees the stack memory. Move the accounting of the stack memory from release_task_stack() to exit_task_stack_account() which then can be invoked from do_exit(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-7-bigeasy@linutronix.de
2022-02-22fork: Move memcg_charge_kernel_stack() into CONFIG_VMAP_STACKSebastian Andrzej Siewior
memcg_charge_kernel_stack() is only used in the CONFIG_VMAP_STACK case. Move memcg_charge_kernel_stack() into the CONFIG_VMAP_STACK block and invoke it from within alloc_thread_stack_node(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-6-bigeasy@linutronix.de
2022-02-22fork: Don't assign the stack pointer in dup_task_struct()Sebastian Andrzej Siewior
All four versions of alloc_thread_stack_node() assign now task_struct::stack in case the allocation was successful. Let alloc_thread_stack_node() return an error code instead of the stack pointer and remove the stack assignment in dup_task_struct(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-5-bigeasy@linutronix.de
2022-02-22fork, IA64: Provide alloc_thread_stack_node() for IA64Sebastian Andrzej Siewior
Provide a generic alloc_thread_stack_node() for IA64 and CONFIG_ARCH_THREAD_STACK_ALLOCATOR which returns stack pointer and sets task_struct::stack so it behaves exactly like the other implementations. Rename IA64's alloc_thread_stack_node() and add the generic version to the fork code so it is in one place _and_ to drastically lower the chances of fat fingering the IA64 code. Do the same for free_thread_stack(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-4-bigeasy@linutronix.de
2022-02-22fork: Duplicate task_struct before stack allocationSebastian Andrzej Siewior
alloc_thread_stack_node() already populates the task_struct::stack member except on IA64. The stack pointer is saved and populated again because IA64 needs it and arch_dup_task_struct() overwrites it. Allocate thread's stack after task_struct has been duplicated as a preparation for further changes. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-3-bigeasy@linutronix.de
2022-02-22fork: Redo ifdefs around task stack handlingSebastian Andrzej Siewior
The use of ifdef CONFIG_VMAP_STACK is confusing in terms what is actually happenning and what can happen. For instance from reading free_thread_stack() it appears that in the CONFIG_VMAP_STACK case it may receive a non-NULL vm pointer but it may also be NULL in which case __free_pages() is used to free the stack. This is however not the case because in the VMAP case a non-NULL pointer is always returned here. Since it looks like this might happen, the compiler creates the correct dead code with the invocation to __free_pages() and everything around it. Twice. Add spaces between the ifdef and the identifer to recognize the ifdef level which is currently in scope. Add the current identifer as a comment behind #else and #endif. Move the code within free_thread_stack() and alloc_thread_stack_node() into the relevant ifdef blocks. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220217102406.3697941-2-bigeasy@linutronix.de
2022-02-20Merge tag 'sched_urgent_for_v5.17_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: "Fix task exposure order when forking tasks" * tag 'sched_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix yet more sched_fork() races
2022-02-20Merge tag 'pidfd.v5.17-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd fix from Christian Brauner: "This fixes a problem reported by lockdep when installing a pidfd via fd_install() with siglock and the tasklisk write lock held in copy_process() when calling clone()/clone3() with CLONE_PIDFD. Originally a pidfd was created prior to holding any of these locks but this required a call to ksys_close(). So quite some time ago in 6fd2fe494b17 ("copy_process(): don't use ksys_close() on cleanups") we switched to a get_unused_fd_flags() + fd_install() model. As part of that we moved fd_install() as late as possible. This was done for two main reasons. First, because we needed to ensure that we call fd_install() past the point of no return as once that's called the fd is live in the task's file table. Second, because we tried to ensure that the fd is visible in /proc/<pid>/fd/<pidfd> right when the task is visible. This fix moves the fd_install() to an even later point which means that a task will be visible in proc while the pidfd isn't yet under /proc/<pid>/fd/<pidfd>. While this is a user visible change it's very unlikely that this will have any impact. Nobody should be relying on that and if they do we need to come up with something better but again, it's doubtful this is relevant" * tag 'pidfd.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: copy_process(): Move fd_install() out of sighand->siglock critical section
2022-02-19sched: Fix yet more sched_fork() racesPeter Zijlstra
Where commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") fixed a fork race vs cgroup, it opened up a race vs syscalls by not placing the task on the runqueue before it gets exposed through the pidhash. Commit 13765de8148f ("sched/fair: Fix fault in reweight_entity") is trying to fix a single instance of this, instead fix the whole class of issues, effectively reverting this commit. Fixes: 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Tadeusz Struk <tadeusz.struk@linaro.org> Tested-by: Zhang Qiao <zhangqiao22@huawei.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lkml.kernel.org/r/YgoeCbwj5mbCR0qA@hirez.programming.kicks-ass.net
2022-02-17ucounts: Enforce RLIMIT_NPROC not RLIMIT_NPROC+1Eric W. Biederman
Michal Koutný <mkoutny@suse.com> wrote: > It was reported that v5.14 behaves differently when enforcing > RLIMIT_NPROC limit, namely, it allows one more task than previously. > This is consequence of the commit 21d1c5e386bc ("Reimplement > RLIMIT_NPROC on top of ucounts") that missed the sharpness of > equality in the forking path. This can be fixed either by fixing the test or by moving the increment to be before the test. Fix it my moving copy_creds which contains the increment before is_ucounts_overlimit. In the case of CLONE_NEWUSER the ucounts in the task_cred changes. The function is_ucounts_overlimit needs to use the final version of the ucounts for the new process. Which means moving the is_ucounts_overlimit test after copy_creds is necessary. Both the test in fork and the test in set_user were semantically changed when the code moved to ucounts. The change of the test in fork was bad because it was before the increment. The test in set_user was wrong and the change to ucounts fixed it. So this fix only restores the old behavior in one lcation not two. Link: https://lkml.kernel.org/r/20220204181144.24462-1-mkoutny@suse.com Link: https://lkml.kernel.org/r/20220216155832.680775-2-ebiederm@xmission.com Cc: stable@vger.kernel.org Reported-by: Michal Koutný <mkoutny@suse.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-02-15sched: Define and initialize a flag to identify valid PASID in the taskPeter Zijlstra
Add a new single bit field to the task structure to track whether this task has initialized the IA32_PASID MSR to the mm's PASID. Initialize the field to zero when creating a new task with fork/clone. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220207230254.3342514-8-fenghua.yu@intel.com
2022-02-15iommu/sva: Assign a PASID to mm on PASID allocation and free it on mm exitFenghua Yu
PASIDs are process-wide. It was attempted to use refcounted PASIDs to free them when the last thread drops the refcount. This turned out to be complex and error prone. Given the fact that the PASID space is 20 bits, which allows up to 1M processes to have a PASID associated concurrently, PASID resource exhaustion is not a realistic concern. Therefore, it was decided to simplify the approach and stick with lazy on demand PASID allocation, but drop the eager free approach and make an allocated PASID's lifetime bound to the lifetime of the process. Get rid of the refcounting mechanisms and replace/rename the interfaces to reflect this new approach. [ bp: Massage commit message. ] Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20220207230254.3342514-6-fenghua.yu@intel.com
2022-02-14kernel/fork: Initialize mm's PASIDFenghua Yu
A new mm doesn't have a PASID yet when it's created. Initialize the mm's PASID on fork() or for init_mm to INVALID_IOASID (-1). INIT_PASID (0) is reserved for kernel legacy DMA PASID. It cannot be allocated to a user process. Initializing the process's PASID to 0 may cause confusion that's why the process uses the reserved kernel legacy DMA PASID. Initializing the PASID to INVALID_IOASID (-1) explicitly tells the process doesn't have a valid PASID yet. Even though the only user of mm_pasid_init() is in fork.c, define it in <linux/sched/mm.h> as the first of three mm/pasid life cycle functions (init/set/drop) to keep these all together. Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220207230254.3342514-5-fenghua.yu@intel.com
2022-02-14mm: Change CONFIG option for mm->pasid fieldFenghua Yu
This currently depends on CONFIG_IOMMU_SUPPORT. But it is only needed when CONFIG_IOMMU_SVA option is enabled. Change the CONFIG guards around definition and initialization of mm->pasid field. Suggested-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20220207230254.3342514-3-fenghua.yu@intel.com
2022-02-11copy_process(): Move fd_install() out of sighand->siglock critical sectionWaiman Long
I was made aware of the following lockdep splat: [ 2516.308763] ===================================================== [ 2516.309085] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected [ 2516.309433] 5.14.0-51.el9.aarch64+debug #1 Not tainted [ 2516.309703] ----------------------------------------------------- [ 2516.310149] stress-ng/153663 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 2516.310512] ffff0000e422b198 (&newf->file_lock){+.+.}-{2:2}, at: fd_install+0x368/0x4f0 [ 2516.310944] and this task is already holding: [ 2516.311248] ffff0000c08140d8 (&sighand->siglock){-.-.}-{2:2}, at: copy_process+0x1e2c/0x3e80 [ 2516.311804] which would create a new lock dependency: [ 2516.312066] (&sighand->siglock){-.-.}-{2:2} -> (&newf->file_lock){+.+.}-{2:2} [ 2516.312446] but this new dependency connects a HARDIRQ-irq-safe lock: [ 2516.312983] (&sighand->siglock){-.-.}-{2:2} : [ 2516.330700] Possible interrupt unsafe locking scenario: [ 2516.331075] CPU0 CPU1 [ 2516.331328] ---- ---- [ 2516.331580] lock(&newf->file_lock); [ 2516.331790] local_irq_disable(); [ 2516.332231] lock(&sighand->siglock); [ 2516.332579] lock(&newf->file_lock); [ 2516.332922] <Interrupt> [ 2516.333069] lock(&sighand->siglock); [ 2516.333291] *** DEADLOCK *** [ 2516.389845] stack backtrace: [ 2516.390101] CPU: 3 PID: 153663 Comm: stress-ng Kdump: loaded Not tainted 5.14.0-51.el9.aarch64+debug #1 [ 2516.390756] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2516.391155] Call trace: [ 2516.391302] dump_backtrace+0x0/0x3e0 [ 2516.391518] show_stack+0x24/0x30 [ 2516.391717] dump_stack_lvl+0x9c/0xd8 [ 2516.391938] dump_stack+0x1c/0x38 [ 2516.392247] print_bad_irq_dependency+0x620/0x710 [ 2516.392525] check_irq_usage+0x4fc/0x86c [ 2516.392756] check_prev_add+0x180/0x1d90 [ 2516.392988] validate_chain+0x8e0/0xee0 [ 2516.393215] __lock_acquire+0x97c/0x1e40 [ 2516.393449] lock_acquire.part.0+0x240/0x570 [ 2516.393814] lock_acquire+0x90/0xb4 [ 2516.394021] _raw_spin_lock+0xe8/0x154 [ 2516.394244] fd_install+0x368/0x4f0 [ 2516.394451] copy_process+0x1f5c/0x3e80 [ 2516.394678] kernel_clone+0x134/0x660 [ 2516.394895] __do_sys_clone3+0x130/0x1f4 [ 2516.395128] __arm64_sys_clone3+0x5c/0x7c [ 2516.395478] invoke_syscall.constprop.0+0x78/0x1f0 [ 2516.395762] el0_svc_common.constprop.0+0x22c/0x2c4 [ 2516.396050] do_el0_svc+0xb0/0x10c [ 2516.396252] el0_svc+0x24/0x34 [ 2516.396436] el0t_64_sync_handler+0xa4/0x12c [ 2516.396688] el0t_64_sync+0x198/0x19c [ 2517.491197] NET: Registered PF_ATMPVC protocol family [ 2517.491524] NET: Registered PF_ATMSVC protocol family [ 2591.991877] sched: RT throttling activated One way to solve this problem is to move the fd_install() call out of the sighand->siglock critical section. Before commit 6fd2fe494b17 ("copy_process(): don't use ksys_close() on cleanups"), the pidfd installation was done without holding both the task_list lock and the sighand->siglock. Obviously, holding these two locks are not really needed to protect the fd_install() call. So move the fd_install() call down to after the releases of both locks. Link: https://lore.kernel.org/r/20220208163912.1084752-1-longman@redhat.com Fixes: 6fd2fe494b17 ("copy_process(): don't use ksys_close() on cleanups") Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2022-01-17Merge branch 'signal-for-v5.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull signal/exit/ptrace updates from Eric Biederman: "This set of changes deletes some dead code, makes a lot of cleanups which hopefully make the code easier to follow, and fixes bugs found along the way. The end-game which I have not yet reached yet is for fatal signals that generate coredumps to be short-circuit deliverable from complete_signal, for force_siginfo_to_task not to require changing userspace configured signal delivery state, and for the ptrace stops to always happen in locations where we can guarantee on all architectures that the all of the registers are saved and available on the stack. Removal of profile_task_ext, profile_munmap, and profile_handoff_task are the big successes for dead code removal this round. A bunch of small bug fixes are included, as most of the issues reported were small enough that they would not affect bisection so I simply added the fixes and did not fold the fixes into the changes they were fixing. There was a bug that broke coredumps piped to systemd-coredump. I dropped the change that caused that bug and replaced it entirely with something much more restrained. Unfortunately that required some rebasing. Some successes after this set of changes: There are few enough calls to do_exit to audit in a reasonable amount of time. The lifetime of struct kthread now matches the lifetime of struct task, and the pointer to struct kthread is no longer stored in set_child_tid. The flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is removed. Issues where task->exit_code was examined with signal->group_exit_code should been examined were fixed. There are several loosely related changes included because I am cleaning up and if I don't include them they will probably get lost. The original postings of these changes can be found at: https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org I trimmed back the last set of changes to only the obviously correct once. Simply because there was less time for review than I had hoped" * 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits) ptrace/m68k: Stop open coding ptrace_report_syscall ptrace: Remove unused regs argument from ptrace_report_syscall ptrace: Remove second setting of PT_SEIZED in ptrace_attach taskstats: Cleanup the use of task->exit_code exit: Use the correct exit_code in /proc/<pid>/stat exit: Fix the exit_code for wait_task_zombie exit: Coredumps reach do_group_exit exit: Remove profile_handoff_task exit: Remove profile_task_exit & profile_munmap signal: clean up kernel-doc comments signal: Remove the helper signal_group_exit signal: Rename group_exit_task group_exec_task coredump: Stop setting signal->group_exit_task signal: Remove SIGNAL_GROUP_COREDUMP signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process signal: Make coredump handling explicit in complete_signal signal: Have prepare_signal detect coredumps using signal->core_state signal: Have the oom killer detect coredumps using signal->core_state exit: Move force_uaccess back into do_exit exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit ...
2022-01-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc updates from Andrew Morton: "146 patches. Subsystems affected by this patch series: kthread, ia64, scripts, ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak, dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap, memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb, userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp, ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits) mm/damon: hide kernel pointer from tracepoint event mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging mm/damon/dbgfs: remove an unnecessary variable mm/damon: move the implementation of damon_insert_region to damon.h mm/damon: add access checking for hugetlb pages Docs/admin-guide/mm/damon/usage: update for schemes statistics mm/damon/dbgfs: support all DAMOS stats Docs/admin-guide/mm/damon/reclaim: document statistics parameters mm/damon/reclaim: provide reclamation statistics mm/damon/schemes: account how many times quota limit has exceeded mm/damon/schemes: account scheme actions that successfully applied mm/damon: remove a mistakenly added comment for a future feature Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning Docs/admin-guide/mm/damon/usage: remove redundant information Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks mm/damon: convert macro functions to static inline functions mm/damon: modify damon_rand() macro to static inline function mm/damon: move damon_rand() definition into damon.h ...
2022-01-15mm: move anon_vma declarations to linux/mm_inline.hArnd Bergmann
The patch to add anonymous vma names causes a build failure in some configurations: include/linux/mm_types.h: In function 'is_same_vma_anon_name': include/linux/mm_types.h:924:37: error: implicit declaration of function 'strcmp' [-Werror=implicit-function-declaration] 924 | return name && vma_name && !strcmp(name, vma_name); | ^~~~~~ include/linux/mm_types.h:22:1: note: 'strcmp' is defined in header '<string.h>'; did you forget to '#include <string.h>'? This should not really be part of linux/mm_types.h in the first place, as that header is meant to only contain structure defintions and need a minimum set of indirect includes itself. While the header clearly includes more than it should at this point, let's not make it worse by including string.h as well, which would pull in the expensive (compile-speed wise) fortify-string logic. Move the new functions into a separate header that only needs to be included in a couple of locations. Link: https://lkml.kernel.org/r/20211207125710.2503446-1-arnd@kernel.org Fixes: "mm: add a field to store names for private anonymous memory" Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Colin Cross <ccross@google.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15mm: add a field to store names for private anonymous memoryColin Cross
In many userspace applications, and especially in VM based applications like Android uses heavily, there are multiple different allocators in use. At a minimum there is libc malloc and the stack, and in many cases there are libc malloc, the stack, direct syscalls to mmap anonymous memory, and multiple VM heaps (one for small objects, one for big objects, etc.). Each of these layers usually has its own tools to inspect its usage; malloc by compiling a debug version, the VM through heap inspection tools, and for direct syscalls there is usually no way to track them. On Android we heavily use a set of tools that use an extended version of the logic covered in Documentation/vm/pagemap.txt to walk all pages mapped in userspace and slice their usage by process, shared (COW) vs. unique mappings, backing, etc. This can account for real physical memory usage even in cases like fork without exec (which Android uses heavily to share as many private COW pages as possible between processes), Kernel SamePage Merging, and clean zero pages. It produces a measurement of the pages that only exist in that process (USS, for unique), and a measurement of the physical memory usage of that process with the cost of shared pages being evenly split between processes that share them (PSS). If all anonymous memory is indistinguishable then figuring out the real physical memory usage (PSS) of each heap requires either a pagemap walking tool that can understand the heap debugging of every layer, or for every layer's heap debugging tools to implement the pagemap walking logic, in which case it is hard to get a consistent view of memory across the whole system. Tracking the information in userspace leads to all sorts of problems. It either needs to be stored inside the process, which means every process has to have an API to export its current heap information upon request, or it has to be stored externally in a filesystem that somebody needs to clean up on crashes. It needs to be readable while the process is still running, so it has to have some sort of synchronization with every layer of userspace. Efficiently tracking the ranges requires reimplementing something like the kernel vma trees, and linking to it from every layer of userspace. It requires more memory, more syscalls, more runtime cost, and more complexity to separately track regions that the kernel is already tracking. This patch adds a field to /proc/pid/maps and /proc/pid/smaps to show a userspace-provided name for anonymous vmas. The names of named anonymous vmas are shown in /proc/pid/maps and /proc/pid/smaps as [anon:<name>]. Userspace can set the name for a region of memory by calling prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME, start, len, (unsigned long)name) Setting the name to NULL clears it. The name length limit is 80 bytes including NUL-terminator and is checked to contain only printable ascii characters (including space), except '[',']','\','$' and '`'. Ascii strings are being used to have a descriptive identifiers for vmas, which can be understood by the users reading /proc/pid/maps or /proc/pid/smaps. Names can be standardized for a given system and they can include some variable parts such as the name of the allocator or a library, tid of the thread using it, etc. The name is stored in a pointer in the shared union in vm_area_struct that points to a null terminated string. Anonymous vmas with the same name (equivalent strings) and are otherwise mergeable will be merged. The name pointers are not shared between vmas even if they contain the same name. The name pointer is stored in a union with fields that are only used on file-backed mappings, so it does not increase memory usage. CONFIG_ANON_VMA_NAME kernel configuration is introduced to enable this feature. It keeps the feature disabled by default to prevent any additional memory overhead and to avoid confusing procfs parsers on systems which are not ready to support named anonymous vmas. The patch is based on the original patch developed by Colin Cross, more specifically on its latest version [1] posted upstream by Sumit Semwal. It used a userspace pointer to store vma names. In that design, name pointers could be shared between vmas. However during the last upstreaming attempt, Kees Cook raised concerns [2] about this approach and suggested to copy the name into kernel memory space, perform validity checks [3] and store as a string referenced from vm_area_struct. One big concern is about fork() performance which would need to strdup anonymous vma names. Dave Hansen suggested experimenting with worst-case scenario of forking a process with 64k vmas having longest possible names [4]. I ran this experiment on an ARM64 Android device and recorded a worst-case regression of almost 40% when forking such a process. This regression is addressed in the followup patch which replaces the pointer to a name with a refcounted structure that allows sharing the name pointer between vmas of the same name. Instead of duplicating the string during fork() or when splitting a vma it increments the refcount. [1] https://lore.kernel.org/linux-mm/20200901161459.11772-4-sumit.semwal@linaro.org/ [2] https://lore.kernel.org/linux-mm/202009031031.D32EF57ED@keescook/ [3] https://lore.kernel.org/linux-mm/202009031022.3834F692@keescook/ [4] https://lore.kernel.org/linux-mm/5d0358ab-8c47-2f5f-8e43-23b89d6a8e95@intel.com/ Changes for prctl(2) manual page (in the options section): PR_SET_VMA Sets an attribute specified in arg2 for virtual memory areas starting from the address specified in arg3 and spanning the size specified in arg4. arg5 specifies the value of the attribute to be set. Note that assigning an attribute to a virtual memory area might prevent it from being merged with adjacent virtual memory areas due to the difference in that attribute's value. Currently, arg2 must be one of: PR_SET_VMA_ANON_NAME Set a name for anonymous virtual memory areas. arg5 should be a pointer to a null-terminated string containing the name. The name length including null byte cannot exceed 80 bytes. If arg5 is NULL, the name of the appropriate anonymous virtual memory areas will be reset. The name can contain only printable ascii characters (including space), except '[',']','\','$' and '`'. This feature is available only if the kernel is built with the CONFIG_ANON_VMA_NAME option enabled. [surenb@google.com: docs: proc.rst: /proc/PID/maps: fix malformed table] Link: https://lkml.kernel.org/r/20211123185928.2513763-1-surenb@google.com [surenb: rebased over v5.15-rc6, replaced userpointer with a kernel copy, added input sanitization and CONFIG_ANON_VMA_NAME config. The bulk of the work here was done by Colin Cross, therefore, with his permission, keeping him as the author] Link: https://lkml.kernel.org/r/20211019215511.3771969-2-surenb@google.com Signed-off-by: Colin Cross <ccross@google.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Glauber <jan.glauber@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Landley <rob@landley.net> Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com> Cc: Shaohua Li <shli@fusionio.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-08exit: Remove profile_handoff_taskEric W. Biederman
All profile_handoff_task does is notify the task_free_notifier chain. The helpers task_handoff_register and task_handoff_unregister are used to add and delete entries from that chain and are never called. So remove the dead code and make it much easier to read and reason about __put_task_struct. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/87fspyw6m0.fsf@email.froward.int.ebiederm.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-01-08kthread: Generalize pf_io_worker so it can point to struct kthreadEric W. Biederman
The point of using set_child_tid to hold the kthread pointer was that it already did what is necessary. There are now restrictions on when set_child_tid can be initialized and when set_child_tid can be used in schedule_tail. Which indicates that continuing to use set_child_tid to hold the kthread pointer is a bad idea. Instead of continuing to use the set_child_tid field of task_struct generalize the pf_io_worker field of task_struct and use it to hold the kthread pointer. Rename pf_io_worker (which is a void * pointer) to worker_private so it can be used to store kthreads struct kthread pointer. Update the kthread code to store the kthread pointer in the worker_private field. Remove the places where set_child_tid had to be dealt with carefully because kthreads also used it. Link: https://lkml.kernel.org/r/CAHk-=wgtFAA9SbVYg0gR1tqPMC17-NYcs0GQkaYg1bGhh1uJQQ@mail.gmail.com Link: https://lkml.kernel.org/r/87a6grvqy8.fsf_-_@email.froward.int.ebiederm.org Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-12-20fork: Rename bad_fork_cleanup_threadgroup_lock to bad_fork_cleanup_delayacctEric W. Biederman
I just fixed a bug in copy_process when using the label bad_fork_cleanup_threadgroup_lock. While fixing the bug I looked closer at the label and realized it has been misnamed since 568ac888215c ("cgroup: reduce read locked section of cgroup_threadgroup_rwsem during fork"). Fix the name so that fork is easier to understand. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-12-20fork: Stop protecting back_fork_cleanup_cgroup_lock with CONFIG_NUMAEric W. Biederman
Mark Brown <broonie@kernel.org> reported: > This is also causing further build errors including but not limited to: > > /tmp/next/build/kernel/fork.c: In function 'copy_process': > /tmp/next/build/kernel/fork.c:2106:4: error: label 'bad_fork_cleanup_threadgroup_lock' used but not defined > 2106 | goto bad_fork_cleanup_threadgroup_lock; > | ^~~~ It turns out that I messed up and was depending upon a label protected by an ifdef. Move the label out of the ifdef as the ifdef around the label no longer makes sense (if it ever did). Link: https://lkml.kernel.org/r/YbugCP144uxXvRsk@sirena.org.uk Fixes: 40966e316f86 ("kthread: Ensure struct kthread is present for all kthreads") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-12-13kthread: Ensure struct kthread is present for all kthreadsEric W. Biederman
Today the rules are a bit iffy and arbitrary about which kernel threads have struct kthread present. Both idle threads and thread started with create_kthread want struct kthread present so that is effectively all kernel threads. Make the rule that if PF_KTHREAD and the task is running then struct kthread is present. This will allow the kernel thread code to using tsk->exit_code with different semantics from ordinary processes. To make ensure that struct kthread is present for all kernel threads move it's allocation into copy_process. Add a deallocation of struct kthread in exec for processes that were kernel threads. Move the allocation of struct kthread for the initial thread earlier so that it is not repeated for each additional idle thread. Move the initialization of struct kthread into set_kthread_struct so that the structure is always and reliably initailized. Clear set_child_tid in free_kthread_struct to ensure the kthread struct is reliably freed during exec. The function free_kthread_struct does not need to clear vfork_done during exec as exec_mm_release called from exec_mmap has already cleared vfork_done. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-11-29fork: move copy_io to block/blk-ioc.cChristoph Hellwig
Move the copying of the I/O context to the block layer as that is where we can use the proper low-level interfaces. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211126115817.2087431-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-14Merge tag 'timers-urgent-2021-11-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix for POSIX CPU timers to address a problem where POSIX CPU timer delivery stops working for a new child task because copy_process() copies state information which is only valid for the parent task" * tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()
2021-11-09Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "87 patches. Subsystems affected by this patch series: mm (pagecache and hugetlb), procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs, init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork, sysvfs, kcov, gdb, resource, selftests, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits) ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL ipc: check checkpoint_restore_ns_capable() to modify C/R proc files selftests/kselftest/runner/run_one(): allow running non-executable files virtio-mem: disallow mapping virtio-mem memory via /dev/mem kernel/resource: disallow access to exclusive system RAM regions kernel/resource: clean up and optimize iomem_is_exclusive() scripts/gdb: handle split debug for vmlinux kcov: replace local_irq_save() with a local_lock_t kcov: avoid enable+disable interrupts if !in_task() kcov: allocate per-CPU memory on the relevant node Documentation/kcov: define `ip' in the example Documentation/kcov: include types.h in the example sysv: use BUILD_BUG_ON instead of runtime check kernel/fork.c: unshare(): use swap() to make code cleaner seq_file: fix passing wrong private data seq_file: move seq_escape() to a header signal: remove duplicate include in signal.h crash_dump: remove duplicate include in crash_dump.h crash_dump: fix boolreturn.cocci warning hfs/hfsplus: use WARN_ON for sanity check ...
2021-11-09kernel/fork.c: unshare(): use swap() to make code cleanerRan Xiaokai
Use swap() instead of reimplementing it. Link: https://lkml.kernel.org/r/20210909022046.8151-1-ran.xiaokai@zte.com.cn Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Cc: Gabriel Krisman Bertazi <krisman@collabora.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Alexey Gladkov <legion@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-03Merge branch 'per_signal_struct_coredumps-for-v5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull per signal_struct coredumps from Eric Biederman: "Current coredumps are mixed up with the exit code, the signal handling code, and the ptrace code making coredumps much more complicated than necessary and difficult to follow. This series of changes starts with ptrace_stop and cleans it up, making it easier to follow what is happening in ptrace_stop. Then cleans up the exec interactions with coredumps. Then cleans up the coredump interactions with exit. Finally the coredump interactions with the signal handling code is cleaned up. The first and last changes are bug fixes for minor bugs. I believe the fact that vfork followed by execve can kill the process the called vfork if exec fails is sufficient justification to change the userspace visible behavior. In previous discussions some of these changes were organized differently and individually appeared to make the code base worse. As currently written I believe they all stand on their own as cleanups and bug fixes. Which means that even if the worst should happen and the last change needs to be reverted for some unimaginable reason, the code base will still be improved. If the worst does not happen there are a more cleanups that can be made. Signals that generate coredumps can easily become eligible for short circuit delivery in complete_signal. The entire rendezvous for generating a coredump can move into get_signal. The function force_sig_info_to_task be written in a way that does not modify the signal handling state of the target task (because coredumps are eligible for short circuit delivery). Many of these future cleanups can be done another way but nothing so cleanly as if coredumps become per signal_struct" * 'per_signal_struct_coredumps-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: coredump: Limit coredumps to a single thread group coredump: Don't perform any cleanups before dumping core exit: Factor coredump_exit_mm out of exit_mm exec: Check for a pending fatal signal instead of core_state ptrace: Remove the unnecessary arguments from arch_ptrace_stop signal: Remove the bogus sigkill_pending in ptrace_stop
2021-11-02posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()Michael Pratt
copy_process currently copies task_struct.posix_cputimers_work as-is. If a timer interrupt arrives while handling clone and before dup_task_struct completes then the child task will have: 1. posix_cputimers_work.scheduled = true 2. posix_cputimers_work.work queued. copy_process clears task_struct.task_works, so (2) will have no effect and posix_cpu_timers_work will never run (not to mention it doesn't make sense for two tasks to share a common linked list). Since posix_cpu_timers_work never runs, posix_cputimers_work.scheduled is never cleared. Since scheduled is set, future timer interrupts will skip scheduling work, with the ultimate result that the task will never receive timer expirations. Together, the complete flow is: 1. Task 1 calls clone(), enters kernel. 2. Timer interrupt fires, schedules task work on Task 1. 2a. task_struct.posix_cputimers_work.scheduled = true 2b. task_struct.posix_cputimers_work.work added to task_struct.task_works. 3. dup_task_struct() copies Task 1 to Task 2. 4. copy_process() clears task_struct.task_works for Task 2. 5. Future timer interrupts on Task 2 see task_struct.posix_cputimers_work.scheduled = true and skip scheduling work. Fix this by explicitly clearing contents of task_struct.posix_cputimers_work in copy_process(). This was never meant to be shared or inherited across tasks in the first place. Fixes: 1fb497dd0030 ("posix-cpu-timers: Provide mechanisms to defer timer handling to task_work") Reported-by: Rhys Hiltner <rhys@justin.tv> Signed-off-by: Michael Pratt <mpratt@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211101210615.716522-1-mpratt@google.com
2021-11-01Merge tag 'sched-core-2021-11-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Thomas Gleixner: - Revert the printk format based wchan() symbol resolution as it can leak the raw value in case that the symbol is not resolvable. - Make wchan() more robust and work with all kind of unwinders by enforcing that the task stays blocked while unwinding is in progress. - Prevent sched_fork() from accessing an invalid sched_task_group - Improve asymmetric packing logic - Extend scheduler statistics to RT and DL scheduling classes and add statistics for bandwith burst to the SCHED_FAIR class. - Properly account SCHED_IDLE entities - Prevent a potential deadlock when initial priority is assigned to a newly created kthread. A recent change to plug a race between cpuset and __sched_setscheduler() introduced a new lock dependency which is now triggered. Break the lock dependency chain by moving the priority assignment to the thread function. - Fix the idle time reporting in /proc/uptime for NOHZ enabled systems. - Improve idle balancing in general and especially for NOHZ enabled systems. - Provide proper interfaces for live patching so it does not have to fiddle with scheduler internals. - Add cluster aware scheduling support. - A small set of tweaks for RT (irqwork, wait_task_inactive(), various scheduler options and delaying mmdrop) - The usual small tweaks and improvements all over the place * tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits) sched/fair: Cleanup newidle_balance sched/fair: Remove sysctl_sched_migration_cost condition sched/fair: Wait before decaying max_newidle_lb_cost sched/fair: Skip update_blocked_averages if we are defering load balance sched/fair: Account update_blocked_averages in newidle_balance cost x86: Fix __get_wchan() for !STACKTRACE sched,x86: Fix L2 cache mask sched/core: Remove rq_relock() sched: Improve wake_up_all_idle_cpus() take #2 irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support. sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ sched: Add cluster scheduler level for x86 sched: Add cluster scheduler level in core and related Kconfig for ARM64 topology: Represent clusters of CPUs within a die sched: Disable -Wunused-but-set-variable sched: Add wrapper for get_wchan() to keep task blocked x86: Fix get_wchan() to support the ORC unwinder proc: Use task_is_running() for wchan in /proc/$pid/stat ...
2021-10-18kernel: remove spurious blkdev.h includesChristoph Hellwig
Various files have acquired spurious includes of <linux/blkdev.h> over time. Remove them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-14kernel/sched: Fix sched_fork() access an invalid sched_task_groupZhang Qiao
There is a small race between copy_process() and sched_fork() where child->sched_task_group point to an already freed pointer. parent doing fork() | someone moving the parent | to another cgroup -------------------------------+------------------------------- copy_process() + dup_task_struct()<1> parent move to another cgroup, and free the old cgroup. <2> + sched_fork() + __set_task_cpu()<3> + task_fork_fair() + sched_slice()<4> In the worst case, this bug can lead to "use-after-free" and cause panic as shown above: (1) parent copy its sched_task_group to child at <1>; (2) someone move the parent to another cgroup and free the old cgroup at <2>; (3) the sched_task_group and cfs_rq that belong to the old cgroup will be accessed at <3> and <4>, which cause a panic: [] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [] PGD 8000001fa0a86067 P4D 8000001fa0a86067 PUD 2029955067 PMD 0 [] Oops: 0000 [#1] SMP PTI [] CPU: 7 PID: 648398 Comm: ebizzy Kdump: loaded Tainted: G OE --------- - - 4.18.0.x86_64+ #1 [] RIP: 0010:sched_slice+0x84/0xc0 [] Call Trace: [] task_fork_fair+0x81/0x120 [] sched_fork+0x132/0x240 [] copy_process.part.5+0x675/0x20e0 [] ? __handle_mm_fault+0x63f/0x690 [] _do_fork+0xcd/0x3b0 [] do_syscall_64+0x5d/0x1d0 [] entry_SYSCALL_64_after_hwframe+0x65/0xca [] RIP: 0033:0x7f04418cd7e1 Between cgroup_can_fork() and cgroup_post_fork(), the cgroup membership and thus sched_task_group can't change. So update child's sched_task_group at sched_post_fork() and move task_fork() and __set_task_cpu() (where accees the sched_task_group) from sched_fork() to sched_post_fork(). Fixes: 8323f26ce342 ("sched: Fix race in task_group") Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lkml.kernel.org/r/20210915064030.2231-1-zhangqiao22@huawei.com
2021-10-08coredump: Limit coredumps to a single thread groupEric W. Biederman
Today when a signal is delivered with a handler of SIG_DFL whose default behavior is to generate a core dump not only that process but every process that shares the mm is killed. In the case of vfork this looks like a real world problem. Consider the following well defined sequence. if (vfork() == 0) { execve(...); _exit(EXIT_FAILURE); } If a signal that generates a core dump is received after vfork but before the execve changes the mm the process that called vfork will also be killed (as the mm is shared). Similarly if the execve fails after the point of no return the kernel delivers SIGSEGV which will kill both the exec'ing process and because the mm is shared the process that called vfork as well. As far as I can tell this behavior is a violation of people's reasonable expectations, POSIX, and is unnecessarily fragile when the system is low on memory. Solve this by making a userspace visible change to only kill a single process/thread group. This is possible because Jann Horn recently modified[1] the coredump code so that the mm can safely be modified while the coredump is happening. With LinuxThreads long gone I don't expect anyone to have a notice this behavior change in practice. To accomplish this move the core_state pointer from mm_struct to signal_struct, which allows different thread groups to coredump simultatenously. In zap_threads remove the work to kill anything except for the current thread group. v2: Remove core_state from the VM_BUG_ON_MM print to fix compile failure when CONFIG_DEBUG_VM is enabled. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> [1] a07279c9a8cd ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot") Fixes: d89f3847def4 ("[PATCH] thread-aware coredumps, 2.5.43-C3") History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Link: https://lkml.kernel.org/r/87y27mvnke.fsf@disp2133 Link: https://lkml.kernel.org/r/20211007144701.67592574@canb.auug.org.au Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-10-06coredump: Don't perform any cleanups before dumping coreEric W. Biederman
Rename coredump_exit_mm to coredump_task_exit and call it from do_exit before PTRACE_EVENT_EXIT, and before any cleanup work for a task happens. This ensures that an accurate copy of the process can be captured in the coredump as no cleanup for the process happens before the coredump completes. This also ensures that PTRACE_EVENT_EXIT will not be visited by any thread until the coredump is complete. Add a new flag PF_POSTCOREDUMP so that tasks that have passed through coredump_task_exit can be recognized and ignored in zap_process. Now that all of the coredumping happens before exit_mm remove code to test for a coredump in progress from mm_release. Replace "may_ptrace_stop()" with a simple test of "current->ptrace". The other tests in may_ptrace_stop all concern avoiding stopping during a coredump. These tests are no longer necessary as it is now guaranteed that fatal_signal_pending will be set if the code enters ptrace_stop during a coredump. The code in ptrace_stop is guaranteed not to stop if fatal_signal_pending returns true. Until this change "ptrace_event(PTRACE_EVENT_EXIT)" could call ptrace_stop without fatal_signal_pending being true, as signals are dequeued in get_signal before calling do_exit. This is no longer an issue as "ptrace_event(PTRACE_EVENT_EXIT)" is no longer reached until after the coredump completes. Link: https://lkml.kernel.org/r/874kaax26c.fsf@disp2133 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-09-08mm/hugetlb: initialize hugetlb_usage in mm_initLiu Zixian
After fork, the child process will get incorrect (2x) hugetlb_usage. If a process uses 5 2MB hugetlb pages in an anonymous mapping, HugetlbPages: 10240 kB and then forks, the child will show, HugetlbPages: 20480 kB The reason for double the amount is because hugetlb_usage will be copied from the parent and then increased when we copy page tables from parent to child. Child will have 2x actual usage. Fix this by adding hugetlb_count_init in mm_init. Link: https://lkml.kernel.org/r/20210826071742.877-1-liuzixian4@huawei.com Fixes: 5d317b2b6536 ("mm: hugetlb: proc: add HugetlbPages field to /proc/PID/status") Signed-off-by: Liu Zixian <liuzixian4@huawei.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "147 patches, based on 7d2a07b769330c34b4deabeed939325c77a7ec2f. Subsystems affected by this patch series: mm (memory-hotplug, rmap, ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan), alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib, checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig, selftests, ipc, and scripts" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits) scripts: check_extable: fix typo in user error message mm/workingset: correct kernel-doc notations ipc: replace costly bailout check in sysvipc_find_ipc() selftests/memfd: remove unused variable Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH configs: remove the obsolete CONFIG_INPUT_POLLDEV prctl: allow to setup brk for et_dyn executables pid: cleanup the stale comment mentioning pidmap_init(). kernel/fork.c: unexport get_{mm,task}_exe_file coredump: fix memleak in dump_vma_snapshot() fs/coredump.c: log if a core dump is aborted due to changed file permissions nilfs2: use refcount_dec_and_lock() to fix potential UAF nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group nilfs2: fix NULL pointer in nilfs_##name##_attr_release nilfs2: fix memory leak in nilfs_sysfs_create_device_group trap: cleanup trap_init() init: move usermodehelper_enable() to populate_rootfs() ...
2021-09-08kernel/fork.c: unexport get_{mm,task}_exe_fileChristoph Hellwig
Only used by core code and the tomoyo which can't be a module either. Link: https://lkml.kernel.org/r/20210820095430.445242-1-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-04Merge tag 'denywrite-for-5.15' of git://github.com/davidhildenbrand/linuxLinus Torvalds
Pull MAP_DENYWRITE removal from David Hildenbrand: "Remove all in-tree usage of MAP_DENYWRITE from the kernel and remove VM_DENYWRITE. There are some (minor) user-visible changes: - We no longer deny write access to shared libaries loaded via legacy uselib(); this behavior matches modern user space e.g. dlopen(). - We no longer deny write access to the elf interpreter after exec completed, treating it just like shared libraries (which it often is). - We always deny write access to the file linked via /proc/pid/exe: sys_prctl(PR_SET_MM_MAP/EXE_FILE) will fail if write access to the file cannot be denied, and write access to the file will remain denied until the link is effectivel gone (exec, termination, sys_prctl(PR_SET_MM_MAP/EXE_FILE)) -- just as if exec'ing the file. Cross-compiled for a bunch of architectures (alpha, microblaze, i386, s390x, ...) and verified via ltp that especially the relevant tests (i.e., creat07 and execve04) continue working as expected" * tag 'denywrite-for-5.15' of git://github.com/davidhildenbrand/linux: fs: update documentation of get_write_access() and friends mm: ignore MAP_DENYWRITE in ksys_mmap_pgoff() mm: remove VM_DENYWRITE binfmt: remove in-tree usage of MAP_DENYWRITE kernel/fork: always deny write access to current MM exe_file kernel/fork: factor out replacing the current MM exe_file binfmt: don't use MAP_DENYWRITE when loading shared libraries via uselib()
generated by cgit (git 2.34.1) at 2024-06-13 05:36:51 +0000