summaryrefslogtreecommitdiff
path: root/kernel/futex.c
AgeCommit message (Collapse)Author
2017-03-23futex,rt_mutex: Introduce rt_mutex_init_waiter()Peter Zijlstra
Since there's already two copies of this code, introduce a helper now before adding a third one. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170322104151.950039479@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23futex: Pull rt_mutex_futex_unlock() out from under hb->lockPeter Zijlstra
There's a number of 'interesting' problems, all caused by holding hb->lock while doing the rt_mutex_unlock() equivalient. Notably: - a PI inversion on hb->lock; and, - a SCHED_DEADLINE crash because of pointer instability. The previous changes: - changed the locking rules to cover {uval,pi_state} with wait_lock. - allow to do rt_mutex_futex_unlock() without dropping wait_lock; which in turn allows to rely on wait_lock atomicity completely. - simplified the waiter conundrum. It's now sufficient to hold rtmutex::wait_lock and a reference on the pi_state to protect the state consistency, so hb->lock can be dropped before calling rt_mutex_futex_unlock(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170322104151.900002056@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23futex: Rework inconsistent rt_mutex/futex_q statePeter Zijlstra
There is a weird state in the futex_unlock_pi() path when it interleaves with a concurrent futex_lock_pi() at the point where it drops hb->lock. In this case, it can happen that the rt_mutex wait_list and the futex_q disagree on pending waiters, in particular rt_mutex will find no pending waiters where futex_q thinks there are. In this case the rt_mutex unlock code cannot assign an owner. The futex side fixup code has to cleanup the inconsistencies with quite a bunch of interesting corner cases. Simplify all this by changing wake_futex_pi() to return -EAGAIN when this situation occurs. This then gives the futex_lock_pi() code the opportunity to continue and the retried futex_unlock_pi() will now observe a coherent state. The only problem is that this breaks RT timeliness guarantees. That is, consider the following scenario: T1 and T2 are both pinned to CPU0. prio(T2) > prio(T1) CPU0 T1 lock_pi() queue_me() <- Waiter is visible preemption T2 unlock_pi() loops with -EAGAIN forever Which is undesirable for PI primitives. Future patches will rectify this. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170322104151.850383690@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23futex: Cleanup refcountingPeter Zijlstra
Add a put_pit_state() as counterpart for get_pi_state() so the refcounting becomes consistent. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170322104151.801778516@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23futex: Change locking rulesPeter Zijlstra
Currently futex-pi relies on hb->lock to serialize everything. But hb->lock creates another set of problems, especially priority inversions on RT where hb->lock becomes a rt_mutex itself. The rt_mutex::wait_lock is the most obvious protection for keeping the futex user space value and the kernel internal pi_state in sync. Rework and document the locking so rt_mutex::wait_lock is held accross all operations which modify the user space value and the pi state. This allows to invoke rt_mutex_unlock() (including deboost) without holding hb->lock as a next step. Nothing yet relies on the new locking rules. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170322104151.751993333@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23futex,rt_mutex: Provide futex specific rt_mutex APIPeter Zijlstra
Part of what makes futex_unlock_pi() intricate is that rt_mutex_futex_unlock() -> rt_mutex_slowunlock() can drop rt_mutex::wait_lock. This means it cannot rely on the atomicy of wait_lock, which would be preferred in order to not rely on hb->lock so much. The reason rt_mutex_slowunlock() needs to drop wait_lock is because it can race with the rt_mutex fastpath, however futexes have their own fast path. Since futexes already have a bunch of separate rt_mutex accessors, complete that set and implement a rt_mutex variant without fastpath for them. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170322104151.702962446@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23futex: Use smp_store_release() in mark_wake_futex()Peter Zijlstra
Since the futex_q can dissapear the instruction after assigning NULL, this really should be a RELEASE barrier. That stops loads from hitting dead memory too. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170322104151.604296452@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-23futex: Cleanup variable names for futex_top_waiter()Peter Zijlstra
futex_top_waiter() returns the top-waiter on the pi_mutex. Assinging this to a variable 'match' totally obscures the code. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170322104151.554710645@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-14futex: Add missing error handling to FUTEX_REQUEUE_PIPeter Zijlstra
Thomas spotted that fixup_pi_state_owner() can return errors and we fail to unlock the rt_mutex in that case. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170304093558.867401760@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-14futex: Fix potential use-after-free in FUTEX_REQUEUE_PIPeter Zijlstra
While working on the futex code, I stumbled over this potential use-after-free scenario. Dmitry triggered it later with syzkaller. pi_mutex is a pointer into pi_state, which we drop the reference on in unqueue_me_pi(). So any access to that pointer after that is bad. Since other sites already do rt_mutex_unlock() with hb->lock held, see for example futex_lock_pi(), simply move the unlock before unqueue_me_pi(). Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170304093558.801744246@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/mm.h> We are going to split <linux/sched/mm.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/mm.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. The APIs that are going to be moved first are: mm_alloc() __mmdrop() mmdrop() mmdrop_async_fn() mmdrop_async() mmget_not_zero() mmput() mmput_async() get_task_mm() mm_access() mm_release() Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/wake_q.h> We are going to split <linux/sched/wake_q.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/wake_q.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27mm: add new mmgrab() helperVegard Nossum
Apart from adding the helper function itself, the rest of the kernel is converted mechanically using: git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)->mm_count);/mmgrab\(\1\);/' git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)\.mm_count);/mmgrab\(\&\1\);/' This is needed for a later patch that hooks into the helper, but might be a worthwhile cleanup on its own. (Michal Hocko provided most of the kerneldoc comment.) Link: http://lkml.kernel.org/r/20161218123229.22952-1-vegard.nossum@oracle.com Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-13futex: Move futex_init() to core_initcallYang Yang
The UEVENT user mode helper is enabled before the initcalls are executed and is available when the root filesystem has been mounted. The user mode helper is triggered by device init calls and the executable might use the futex syscall. futex_init() is marked __initcall which maps to device_initcall, but there is no guarantee that futex_init() is invoked _before_ the first device init call which triggers the UEVENT user mode helper. If the user mode helper uses the futex syscall before futex_init() then the syscall crashes with a NULL pointer dereference because the futex subsystem has not been initialized yet. Move futex_init() to core_initcall so futexes are initialized before the root filesystem is mounted and the usermode helper becomes available. [ tglx: Rewrote changelog ] Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Cc: jiang.biao2@zte.com.cn Cc: jiang.zhengxiong@zte.com.cn Cc: zhong.weidong@zte.com.cn Cc: deng.huali@zte.com.cn Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1483085875-6130-1-git-send-email-yang.yang29@zte.com.cn Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25ktime: Get rid of the unionThomas Gleixner
ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-11-21sched/wake_q: Rename WAKE_Q to DEFINE_WAKE_QWaiman Long
Currently the wake_q data structure is defined by the WAKE_Q() macro. This macro, however, looks like a function doing something as "wake" is a verb. Even checkpatch.pl was confused as it reported warnings like WARNING: Missing a blank line after declarations #548: FILE: kernel/futex.c:3665: + int ret; + WAKE_Q(wake_q); This patch renames the WAKE_Q() macro to DEFINE_WAKE_Q() which clarifies what the macro is doing and eliminates the checkpatch.pl warnings. Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1479401198-1765-1-git-send-email-longman@redhat.com [ Resolved conflict and added missing rename. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-05futex: Add some more function commentryThomas Gleixner
Add some more comments and reformat existing ones to kernel doc style. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Link: http://lkml.kernel.org/r/1464770609-30168-1-git-send-email-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29futex: Assume all mappings are private on !MMU systemsThomas Gleixner
To quote Rick why there is no need for shared mapping on !MMU systems: |With MMU, shared futex keys need to identify the physical backing for |a memory address because it may be mapped at different addresses in |different processes (or even multiple times in the same process). |Without MMU this cannot happen. You only have physical addresses. So |the "private futex" behavior of using the virtual address as the key |is always correct (for both shared and private cases) on nommu |systems. This patch disables the FLAGS_SHARED in a way that allows the compiler to remove that code. [bigeasy: Added changelog ] Reported-by: Rich Felker <dalias@libc.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20160729143230.GA21715@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-06-08futex: Calculate the futex key based on a tail page for file-based futexesMel Gorman
Mike Galbraith reported that the LTP test case futex_wake04 was broken by commit 65d8fc777f6d ("futex: Remove requirement for lock_page() in get_futex_key()"). This test case uses futexes backed by hugetlbfs pages and so there is an associated inode with a futex stored on such pages. The problem is that the key is being calculated based on the head page index of the hugetlbfs page and not the tail page. Prior to the optimisation, the page lock was used to stabilise mappings and pin the inode is file-backed which is overkill. If the page was a compound page, the head page was automatically looked up as part of the page lock operation but the tail page index was used to calculate the futex key. After the optimisation, the compound head is looked up early and the page lock is only relied upon to identify truncated pages, special pages or a shmem page moving to swapcache. The head page is looked up because without the page lock, special care has to be taken to pin the inode correctly. However, the tail page is still required to calculate the futex key so this patch records the tail page. On vanilla 4.6, the output of the test case is; futex_wake04 0 TINFO : Hugepagesize 2097152 futex_wake04 1 TFAIL : futex_wake04.c:126: Bug: wait_thread2 did not wake after 30 secs. With the patch applied futex_wake04 0 TINFO : Hugepagesize 2097152 futex_wake04 1 TPASS : Hi hydra, thread2 awake! Fixes: 65d8fc777f6d "futex: Remove requirement for lock_page() in get_futex_key()" Reported-and-tested-by: Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160608132522.GM2469@suse.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-05-22x86: remove more uaccess_32.h complexityLinus Torvalds
I'm looking at trying to possibly merge the 32-bit and 64-bit versions of the x86 uaccess.h implementation, but first this needs to be cleaned up. For example, the 32-bit version of "__copy_from_user_inatomic()" is mostly the special cases for the constant size, and it's actually almost never relevant. Most users aren't actually using a constant size anyway, and the few cases that do small constant copies are better off just using __get_user() instead. So get rid of the unnecessary complexity. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-21futex: Acknowledge a new waiter in counter before plistDavidlohr Bueso
Otherwise an incoming waker on the dest hash bucket can miss the waiter adding itself to the plist during the lockless check optimization (small window but still the correct way of doing this); similarly to the decrement counterpart. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: bigeasy@linutronix.de Cc: dvhart@infradead.org Cc: stable@kernel.org Link: http://lkml.kernel.org/r/1461208164-29150-1-git-send-email-dave@stgolabs.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-20futex: Handle unlock_pi race gracefullySebastian Andrzej Siewior
If userspace calls UNLOCK_PI unconditionally without trying the TID -> 0 transition in user space first then the user space value might not have the waiters bit set. This opens the following race: CPU0 CPU1 uval = get_user(futex) lock(hb) lock(hb) futex |= FUTEX_WAITERS .... unlock(hb) cmpxchg(futex, uval, newval) So the cmpxchg fails and returns -EINVAL to user space, which is wrong because the futex value is valid. To handle this (yes, yet another) corner case gracefully, check for a flag change and retry. [ tglx: Massaged changelog and slightly reworked implementation ] Fixes: ccf9e6a80d9e ("futex: Make unlock_pi more robust") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Darren Hart <dvhart@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1460723739-5195-1-git-send-email-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-08futex: Replace barrier() in unqueue_me() with READ_ONCE()Jianyu Zhan
Commit e91467ecd1ef ("bug in futex unqueue_me") introduced a barrier() in unqueue_me() to prevent the compiler from rereading the lock pointer which might change after a check for NULL. Replace the barrier() with a READ_ONCE() for the following reasons: 1) READ_ONCE() is a weaker form of barrier() that affects only the specific load operation, while barrier() is a general compiler level memory barrier. READ_ONCE() was not available at the time when the barrier was added. 2) Aside of that READ_ONCE() is descriptive and self explainatory while a barrier without comment is not clear to the casual reader. No functional change. [ tglx: Massaged changelog ] Signed-off-by: Jianyu Zhan <nasa4836@gmail.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Cc: dave@stgolabs.net Cc: peterz@infradead.org Cc: linux@rasmusvillemoes.dk Cc: akpm@linux-foundation.org Cc: fengguang.wu@intel.com Cc: bigeasy@linutronix.de Link: http://lkml.kernel.org/r/1457314344-5685-1-git-send-email-nasa4836@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-17futex: Remove requirement for lock_page() in get_futex_key()Mel Gorman
When dealing with key handling for shared futexes, we can drastically reduce the usage/need of the page lock. 1) For anonymous pages, the associated futex object is the mm_struct which does not require the page lock. 2) For inode based, keys, we can check under RCU read lock if the page mapping is still valid and take reference to the inode. This just leaves one rare race that requires the page lock in the slow path when examining the swapcache. Additionally realtime users currently have a problem with the page lock being contended for unbounded periods of time during futex operations. Task A get_futex_key() lock_page() ---> preempted Now any other task trying to lock that page will have to wait until task A gets scheduled back in, which is an unbound time. With this patch, we pretty much have a lockless futex_get_key(). Experiments show that this patch can boost/speedup the hashing of shared futexes with the perf futex benchmarks (which is good for measuring such change) by up to 45% when there are high (> 100) thread counts on a 60 core Westmere. Lower counts are pretty much in the noise range or less than 10%, but mid range can be seen at over 30% overall throughput (hash ops/sec). This makes anon-mem shared futexes much closer to its private counterpart. Signed-off-by: Mel Gorman <mgorman@suse.de> [ Ported on top of thp refcount rework, changelog, comments, fixes. ] Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Chris Mason <clm@fb.com> Cc: Darren Hart <dvhart@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: dave@stgolabs.net Link: http://lkml.kernel.org/r/1455045314-8305-3-git-send-email-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-17futex: Rename barrier references in ordering guaranteesDavidlohr Bueso
Ingo suggested we rename how we reference barriers A and B regarding futex ordering guarantees. This patch replaces, for both barriers, MB (A) with smp_mb(); (A), such that: - We explicitly state that the barriers are SMP, and - We standardize how we reference these across futex.c helping readers follow what barrier does what and where. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Chris Mason <clm@fb.com> Cc: Darren Hart <dvhart@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: dave@stgolabs.net Link: http://lkml.kernel.org/r/1455045314-8305-2-git-send-email-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-26rtmutex: Make wait_lock irq safeThomas Gleixner
Sasha reported a lockdep splat about a potential deadlock between RCU boosting rtmutex and the posix timer it_lock. CPU0 CPU1 rtmutex_lock(&rcu->rt_mutex) spin_lock(&rcu->rt_mutex.wait_lock) local_irq_disable() spin_lock(&timer->it_lock) spin_lock(&rcu->mutex.wait_lock) --> Interrupt spin_lock(&timer->it_lock) This is caused by the following code sequence on CPU1 rcu_read_lock() x = lookup(); if (x) spin_lock_irqsave(&x->it_lock); rcu_read_unlock(); return x; We could fix that in the posix timer code by keeping rcu read locked across the spinlocked and irq disabled section, but the above sequence is common and there is no reason not to support it. Taking rt_mutex.wait_lock irq safe prevents the deadlock. Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
2016-01-20ptrace: use fsuid, fsgid, effective creds for fs access checksJann Horn
By checking the effective credentials instead of the real UID / permitted capabilities, ensure that the calling process actually intended to use its credentials. To ensure that all ptrace checks use the correct caller credentials (e.g. in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS flag), use two new flags and require one of them to be set. The problem was that when a privileged task had temporarily dropped its privileges, e.g. by calling setreuid(0, user_uid), with the intent to perform following syscalls with the credentials of a user, it still passed ptrace access checks that the user would not be able to pass. While an attacker should not be able to convince the privileged task to perform a ptrace() syscall, this is a problem because the ptrace access check is reused for things in procfs. In particular, the following somewhat interesting procfs entries only rely on ptrace access checks: /proc/$pid/stat - uses the check for determining whether pointers should be visible, useful for bypassing ASLR /proc/$pid/maps - also useful for bypassing ASLR /proc/$pid/cwd - useful for gaining access to restricted directories that contain files with lax permissions, e.g. in this scenario: lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar drwx------ root root /root drwxr-xr-x root root /root/foobar -rw-r--r-- root root /root/foobar/secret Therefore, on a system where a root-owned mode 6755 binary changes its effective credentials as described and then dumps a user-specified file, this could be used by an attacker to reveal the memory layout of root's processes or reveal the contents of files he is not allowed to access (through /proc/$pid/cwd). [akpm@linux-foundation.org: fix warning] Signed-off-by: Jann Horn <jann@thejh.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15mm: bring in additional flag for fixup_user_fault to signal unlockDominik Dingel
During Jason's work with postcopy migration support for s390 a problem regarding gmap faults was discovered. The gmap code will call fixup_user_fault which will end up always in handle_mm_fault. Till now we never cared about retries, but as the userfaultfd code kind of relies on it. this needs some fix. This patchset does not take care of the futex code. I will now look closer at this. This patch (of 2): With the introduction of userfaultfd, kvm on s390 needs fixup_user_fault to pass in FAULT_FLAG_ALLOW_RETRY and give feedback if during the faulting we ever unlocked mmap_sem. This patch brings in the logic to handle retries as well as it cleans up the current documentation. fixup_user_fault was not having the same semantics as filemap_fault. It never indicated if a retry happened and so a caller wasn't able to handle that case. So we now changed the behaviour to always retry a locked mmap_sem. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Jason J. Herne" <jjherne@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15futex, thp: remove special case for THP in get_futex_keyKirill A. Shutemov
With new THP refcounting, we don't need tricks to stabilize huge page. If we've got reference to tail page, it can't split under us. This patch effectively reverts a5b338f2b0b1 ("thp: update futex compound knowledge"). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Tested-by: Artem Savkov <artem.savkov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-20futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT opDarren Hart
While reviewing Michael Kerrisk's recent futex manpage update, I noticed that we allow the FUTEX_CLOCK_REALTIME flag for FUTEX_WAIT_BITSET but not for FUTEX_WAIT. FUTEX_WAIT is treated as a simple version for FUTEX_WAIT_BITSET internally (with a bitmask of FUTEX_BITSET_MATCH_ANY). As such, I cannot come up with a reason for this exclusion for FUTEX_WAIT. This change does modify the behavior of the futex syscall, changing a call with FUTEX_WAIT | FUTEX_CLOCK_REALTIME from returning -ENOSYS, to be equivalent to FUTEX_WAIT_BITSET | FUTEX_CLOCK_REALTIME with a bitset of FUTEX_BITSET_MATCH_ANY. Reported-by: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Link: http://lkml.kernel.org/r/9f3bdc116d79d23f5ee72ceb9a2a857f5ff8fa29.1450474525.git.dvhart@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-20futex: Cleanup the goto confusion in requeue_pi()Thomas Gleixner
out_unlock: does not only drop the locks, it also drops the refcount on the pi_state. Really intuitive. Move the label after the put_pi_state() call and use 'break' in the error handling path of the requeue loop. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <darren@dvhart.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Bhuvanesh_Surachari@mentor.com Cc: Andy Lowe <Andy_Lowe@mentor.com> Link: http://lkml.kernel.org/r/20151219200607.526665141@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-20futex: Remove pointless put_pi_state calls in requeue()Thomas Gleixner
In the error handling cases we neither have pi_state nor a reference to it. Remove the pointless code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <darren@dvhart.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Bhuvanesh_Surachari@mentor.com Cc: Andy Lowe <Andy_Lowe@mentor.com> Link: http://lkml.kernel.org/r/20151219200607.432780944@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-20futex: Document pi_state refcounting in requeue codeThomas Gleixner
Documentation of the pi_state refcounting in the requeue code is non existent. Add it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <darren@dvhart.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Bhuvanesh_Surachari@mentor.com Cc: Andy Lowe <Andy_Lowe@mentor.com> Link: http://lkml.kernel.org/r/20151219200607.335938312@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-20futex: Rename free_pi_state() to put_pi_state()Thomas Gleixner
free_pi_state() is confusing as it is in fact only freeing/caching the pi state when the last reference is gone. Rename it to put_pi_state() which reflects better what it is doing. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <darren@dvhart.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Bhuvanesh_Surachari@mentor.com Cc: Andy Lowe <Andy_Lowe@mentor.com> Link: http://lkml.kernel.org/r/20151219200607.259636467@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-20futex: Drop refcount if requeue_pi() acquired the rtmutexThomas Gleixner
If the proxy lock in the requeue loop acquires the rtmutex for a waiter then it acquired also refcount on the pi_state related to the futex, but the waiter side does not drop the reference count. Add the missing free_pi_state() call. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <darren@dvhart.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Bhuvanesh_Surachari@mentor.com Cc: Andy Lowe <Andy_Lowe@mentor.com> Link: http://lkml.kernel.org/r/20151219200607.178132067@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org
2015-11-04Merge tag 'driver-core-4.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the "big" driver core updates for 4.4-rc1. Primarily a bunch of debugfs updates, with a smattering of minor driver core fixes and updates as well. All have been in linux-next for a long time" * tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: debugfs: Add debugfs_create_ulong() of: to support binding numa node to specified device in devicetree debugfs: Add read-only/write-only bool file ops debugfs: Add read-only/write-only size_t file ops debugfs: Add read-only/write-only x64 file ops debugfs: Consolidate file mode checks in debugfs_create_*() Revert "mm: Check if section present during memory block (un)registering" driver-core: platform: Provide helpers for multi-driver modules mm: Check if section present during memory block (un)registering devres: fix a for loop bounds check CMA: fix CONFIG_CMA_SIZE_MBYTES overflow in 64bit base/platform: assert that dev_pm_domain callbacks are called unconditionally sysfs: correctly handle short reads on PREALLOC attrs. base: soc: siplify ida usage kobject: move EXPORT_SYMBOL() macros next to corresponding definitions kobject: explain what kobject's sd field is debugfs: document that debugfs_remove*() accepts NULL and error values debugfs: Pass bool pointer to debugfs_create_bool() ACPI / EC: Fix broken 64bit big-endian users of 'global_lock'
2015-10-04debugfs: Pass bool pointer to debugfs_create_bool()Viresh Kumar
Its a bit odd that debugfs_create_bool() takes 'u32 *' as an argument, when all it needs is a boolean pointer. It would be better to update this API to make it accept 'bool *' instead, as that will make it more consistent and often more convenient. Over that bool takes just a byte. That required updates to all user sites as well, in the same commit updating the API. regmap core was also using debugfs_{read|write}_file_bool(), directly and variable types were updated for that to be bool as well. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-22futex: Force hot variables into a single cache lineRasmus Villemoes
futex_hash() references two global variables: the base pointer futex_queues and the size of the array futex_hashsize. The latter is marked __read_mostly, while the former is not, so they are likely to end up very far from each other. This means that futex_hash() is likely to encounter two cache misses. We could mark futex_queues as __read_mostly as well, but that doesn't guarantee they'll end up next to each other (and even if they do, they may still end up in different cache lines). So put the two variables in a small singleton struct with sufficient alignment and mark that as __read_mostly. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/1441834601-13633-1-git-send-email-linux@rasmusvillemoes.dk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-20futex: Make should_fail_futex() statickbuild test robot
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: kbuild-all@01.org Cc: tipbuild@zytor.com Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <darren@dvhart.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Brian Silverman <bsilver16384@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-20futex: Fault/error injection capabilitiesDavidlohr Bueso
Although futexes are well known for being a royal pita, we really have very little debugging capabilities - except for relying on tglx's eye half the time. By simply making use of the existing fault-injection machinery, we can improve this situation, allowing generating artificial uaddress faults and deadlock scenarios. Of course, when this is disabled in production systems, the overhead for failure checks is practically zero -- so this is very cheap at the same time. Future work would be nice to now enhance trinity to make use of this. There is a special tunable 'ignore-private', which can filter out private futexes. Given the tsk->make_it_fail filter and this option, pi futexes can be narrowed down pretty closely. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <darren@dvhart.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Link: http://lkml.kernel.org/r/1435645562-975-3-git-send-email-dave@stgolabs.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-20futex: Enhance comments in futex_lock_pi() for blocking pathsDavidlohr Bueso
... serves a bit better to clarify between blocking and non-blocking code paths. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <darren@dvhart.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Link: http://lkml.kernel.org/r/1435645562-975-2-git-send-email-dave@stgolabs.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-24Merge branch 'sched-locking-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Thomas Gleixner: "These locking updates depend on the alreay merged sched/core branch: - Lockless top waiter wakeup for rtmutex (Davidlohr) - Reduce hash bucket lock contention for PI futexes (Sebastian) - Documentation update (Davidlohr)" * 'sched-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rtmutex: Update stale plist comments futex: Lower the lock contention on the HB lock during wake up locking/rtmutex: Implement lockless top-waiter wakeup
2015-06-22Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "A rather largish update for everything time and timer related: - Cache footprint optimizations for both hrtimers and timer wheel - Lower the NOHZ impact on systems which have NOHZ or timer migration disabled at runtime. - Optimize run time overhead of hrtimer interrupt by making the clock offset updates smarter - hrtimer cleanups and removal of restrictions to tackle some problems in sched/perf - Some more leap second tweaks - Another round of changes addressing the 2038 problem - First step to change the internals of clock event devices by introducing the necessary infrastructure - Allow constant folding for usecs/msecs_to_jiffies() - The usual pile of clockevent/clocksource driver updates The hrtimer changes contain updates to sched, perf and x86 as they depend on them plus changes all over the tree to cleanup API changes and redundant code, which got copied all over the place. The y2038 changes touch s390 to remove the last non 2038 safe code related to boot/persistant clock" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits) clocksource: Increase dependencies of timer-stm32 to limit build wreckage timer: Minimize nohz off overhead timer: Reduce timer migration overhead if disabled timer: Stats: Simplify the flags handling timer: Replace timer base by a cpu index timer: Use hlist for the timer wheel hash buckets timer: Remove FIFO "guarantee" timers: Sanitize catchup_timer_jiffies() usage hrtimer: Allow hrtimer::function() to free the timer seqcount: Introduce raw_write_seqcount_barrier() seqcount: Rename write_seqcount_barrier() hrtimer: Fix hrtimer_is_queued() hole hrtimer: Remove HRTIMER_STATE_MIGRATE selftest: Timers: Avoid signal deadlock in leap-a-day timekeeping: Copy the shadow-timekeeper over the real timekeeper last clockevents: Check state instead of mode in suspend/resume path selftests: timers: Add leap-second timer edge testing to leap-a-day.c ntp: Do leapsecond adjustment in adjtimex read path time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edge ntp: Introduce and use SECS_PER_DAY macro instead of 86400 ...
2015-06-22Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes are: - lockless wakeup support for futexes and IPC message queues (Davidlohr Bueso, Peter Zijlstra) - Replace spinlocks with atomics in thread_group_cputimer(), to improve scalability (Jason Low) - NUMA balancing improvements (Rik van Riel) - SCHED_DEADLINE improvements (Wanpeng Li) - clean up and reorganize preemption helpers (Frederic Weisbecker) - decouple page fault disabling machinery from the preemption counter, to improve debuggability and robustness (David Hildenbrand) - SCHED_DEADLINE documentation updates (Luca Abeni) - topology CPU masks cleanups (Bartosz Golaszewski) - /proc/sched_debug improvements (Srikar Dronamraju)" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits) sched/deadline: Remove needless parameter in dl_runtime_exceeded() sched: Remove superfluous resetting of the p->dl_throttled flag sched/deadline: Drop duplicate init_sched_dl_class() declaration sched/deadline: Reduce rq lock contention by eliminating locking of non-feasible target sched/deadline: Make init_sched_dl_class() __init sched/deadline: Optimize pull_dl_task() sched/preempt: Add static_key() to preempt_notifiers sched/preempt: Fix preempt notifiers documentation about hlist_del() within unsafe iteration sched/stop_machine: Fix deadlock between multiple stop_two_cpus() sched/debug: Add sum_sleep_runtime to /proc/<pid>/sched sched/debug: Replace vruntime with wait_sum in /proc/sched_debug sched/debug: Properly format runnable tasks in /proc/sched_debug sched/numa: Only consider less busy nodes as numa balancing destinations Revert 095bebf61a46 ("sched/numa: Do not move past the balance point if unbalanced") sched/fair: Prevent throttling in early pick_next_task_fair() preempt: Reorganize the notrace definitions a bit preempt: Use preempt_schedule_context() as the official tracing preemption point sched: Make preempt_schedule_context() function-tracing safe x86: Remove cpu_sibling_mask() and cpu_core_mask() x86: Replace cpu_**_mask() with topology_**_cpumask() ...
2015-06-19futex: Lower the lock contention on the HB lock during wake upSebastian Andrzej Siewior
wake_futex_pi() wakes the task before releasing the hash bucket lock (HB). The first thing the woken up task usually does is to acquire the lock which requires the HB lock. On SMP Systems this leads to blocking on the HB lock which is released by the owner shortly after. This patch rearranges the unlock path by first releasing the HB lock and then waking up the task. [ tglx: Fixed up the rtmutex unlock path ] Originally-from: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Link: http://lkml.kernel.org/r/20150617083350.GA2433@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-19locking/arch: Rename set_mb() to smp_store_mb()Peter Zijlstra
Since set_mb() is really about an smp_mb() -- not a IO/DMA barrier like mb() rename it to match the recent smp_load_acquire() and smp_store_release(). Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-08futex: Implement lockless wakeupsDavidlohr Bueso
Given the overall futex architecture, any chance of reducing hb->lock contention is welcome. In this particular case, using wake-queues to enable lockless wakeups addresses very much real world performance concerns, even cases of soft-lockups in cases of large amounts of blocked tasks (which is not hard to find in large boxes, using but just a handful of futex). At the lowest level, this patch can reduce latency of a single thread attempting to acquire hb->lock in highly contended scenarios by a up to 2x. At lower counts of nr_wake there are no regressions, confirming, of course, that the wake_q handling overhead is practically non existent. For instance, while a fair amount of variation, the extended pef-bench wakeup benchmark shows for a 20 core machine the following avg per-thread time to wakeup its share of tasks: nr_thr ms-before ms-after 16 0.0590 0.0215 32 0.0396 0.0220 48 0.0417 0.0182 64 0.0536 0.0236 80 0.0414 0.0097 96 0.0672 0.0152 Naturally, this can cause spurious wakeups. However there is no core code that cannot handle them afaict, and furthermore tglx does have the point that other events can already trigger them anyway. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Chris Mason <clm@fb.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: George Spelvin <linux@horizon.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1430494072-30283-3-git-send-email-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-22futex: Remove bogus hrtimer_active() checkThomas Gleixner
The check for hrtimer_active() after starting the timer is pointless. If the timer is inactive it has expired already and therefor the task pointer is already NULL. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20150414203502.985825453@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-02-24Merge tag 'v4.0-rc1' into locking/core, to refresh the tree before merging ↵Ingo Molnar
new changes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18locking/futex: Check PF_KTHREAD rather than !p->mm to filter out kthreadsOleg Nesterov
attach_to_pi_owner() checks p->mm to prevent attaching to kthreads and this looks doubly wrong: 1. It should actually check PF_KTHREAD, kthread can do use_mm(). 2. If this task is not kthread and it is actually the lock owner we can wrongly return -EPERM instead of -ESRCH or retry-if-EAGAIN. And note that this wrong EPERM is the likely case unless the exiting task is (auto)reaped quickly, we check ->mm before PF_EXITING. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Darren Hart <darren@dvhart.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mateusz Guzik <mguzik@redhat.com> Link: http://lkml.kernel.org/r/20150202140536.GA26406@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>