summaryrefslogtreecommitdiff
path: root/kernel/irq/manage.c
AgeCommit message (Collapse)Author
2019-05-07Merge tag 'printk-for-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow state reset of printk_once() calls. - Prevent crashes when dereferencing invalid pointers in vsprintf(). Only the first byte is checked for simplicity. - Make vsprintf warnings consistent and inlined. - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf modifiers. - Some clean up of vsprintf and test_printf code. * tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: lib/vsprintf: Make function pointer_string static vsprintf: Limit the length of inlined error messages vsprintf: Avoid confusion between invalid address and value vsprintf: Prevent crash when dereferencing invalid pointers vsprintf: Consolidate handling of unknown pointer specifiers vsprintf: Factor out %pO handler as kobject_string() vsprintf: Factor out %pV handler as va_format() vsprintf: Factor out %p[iI] handler as ip_addr_string() vsprintf: Do not check address of well-known strings vsprintf: Consistent %pK handling for kptr_restrict == 0 vsprintf: Shuffle restricted_pointer() printk: Tie printk_once / printk_deferred_once into .data.once for reset treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively lib/test_printf: Switch to bitmap_zalloc()
2019-04-09treewide: Switch printk users from %pf and %pF to %ps and %pS, respectivelySakari Ailus
%pF and %pf are functionally equivalent to %pS and %ps conversion specifiers. The former are deprecated, therefore switch the current users to use the preferred variant. The changes have been produced by the following command: git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \ while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done And verifying the result. Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: xen-devel@lists.xenproject.org Cc: linux-acpi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvdimm@lists.01.org Cc: linux-pci@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-btrfs@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: linux-mm@kvack.org Cc: ceph-devel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: David Sterba <dsterba@suse.com> (for btrfs) Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c) Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci) Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-03-24genirq: Prevent use-after-free and work list corruptionPrasad Sodagudi
When irq_set_affinity_notifier() replaces the notifier, then the reference count on the old notifier is dropped which causes it to be freed. But nothing ensures that the old notifier is not longer queued in the work list. If it is queued this results in a use after free and possibly in work list corruption. Ensure that the work is canceled before the reference is dropped. Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: marc.zyngier@arm.com Link: https://lkml.kernel.org/r/1553439424-6529-1-git-send-email-psodagud@codeaurora.org
2019-03-23genirq: Mark expected switch case fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. With -Wimplicit-fallthrough added to CFLAGS: kernel/irq/manage.c: In function ‘irq_do_set_affinity’: kernel/irq/manage.c:198:3: warning: this statement may fall through [-Wimplicit-fallthrough=] cpumask_copy(desc->irq_common_data.affinity, mask); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/irq/manage.c:199:2: note: here case IRQ_SET_MASK_OK_NOCOPY: ^~~~ Annotate it. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Link: https://lkml.kernel.org/r/20190228213714.GA9246@embeddedor
2019-02-23Merge tag 'irqchip-5.1' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier - Core pseudo-NMI handling code - Allow the default irq domain to be retrieved - A new interrupt controller for the Loongson LS1X platform - Affinity support for the SiFive PLIC - Better support for the iMX irqsteer driver - NUMA aware memory allocations for GICv3 - A handful of other fixes (i8259, GICv3, PLIC)
2019-02-14Merge branch 'linus' into irq/coreThomas Gleixner
Pick up upstream changes to avoid conflicts for pending patches.
2019-02-14genirq: Fix wrong name in request_percpu_nmi() descriptionJulien Thierry
ready_percpu_nmi() was the previous name of prepare_percpu_nmi(). Update request_percpu_nmi() comment with the correct function name. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Reported-by: Li Wei <liwei391@huawei.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-05genirq: Provide NMI management for percpu_devid interruptsJulien Thierry
Add support for percpu_devid interrupts treated as NMIs. Percpu_devid NMIs need to be setup/torn down on each CPU they target. The same restrictions as for global NMIs still apply for percpu_devid NMIs. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-05genirq: Provide basic NMI management for interrupt linesJulien Thierry
Add functionality to allocate interrupt lines that will deliver IRQs as Non-Maskable Interrupts. These allocations are only successful if the irqchip provides the necessary support and allows NMI delivery for the interrupt line. Interrupt lines allocated for NMI delivery must be enabled/disabled through enable_nmi/disable_nmi_nosync to keep their state consistent. To treat a PERCPU IRQ as NMI, the interrupt must not be shared nor threaded, the irqchip directly managing the IRQ must be the root irqchip and the irqchip cannot be behind a slow bus. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-01-15genirq: Make sure the initial affinity is not emptySrinivas Ramana
If all CPUs in the irq_default_affinity mask are offline when an interrupt is initialized then irq_setup_affinity() can set an empty affinity mask for a newly allocated interrupt. Fix this by falling back to cpu_online_mask in case the resulting affinity mask is zero. Signed-off-by: Srinivas Ramana <sramana@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-msm@vger.kernel.org Link: https://lkml.kernel.org/r/1545312957-8504-1-git-send-email-sramana@codeaurora.org
2019-01-15genirq: Annotate implicit fall throughMathieu Malaterre
There is a plan to build the kernel with -Wimplicit-fallthrough. The fallthrough in __irq_set_trigger() lacks an annotation. Add it. Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190114203154.17125-1-malat@debian.org
2018-12-18genirq: Fix various typos in commentsIngo Molnar
Go over the IRQ subsystem source code (including irqchip drivers) and fix common typos in comments. No change in functionality intended. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org
2018-10-19genirq: Fix race on spurious interrupt detectionLukas Wunner
Commit 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of threaded irqs") made detection of spurious interrupts work for threaded handlers by: a) incrementing a counter every time the thread returns IRQ_HANDLED, and b) checking whether that counter has increased every time the thread is woken. However for oneshot interrupts, the commit unmasks the interrupt before incrementing the counter. If another interrupt occurs right after unmasking but before the counter is incremented, that interrupt is incorrectly considered spurious: time | irq_thread() | irq_thread_fn() | action->thread_fn() | irq_finalize_oneshot() | unmask_threaded_irq() /* interrupt is unmasked */ | | /* interrupt fires, incorrectly deemed spurious */ | | atomic_inc(&desc->threads_handled); /* counter is incremented */ v This is observed with a hi3110 CAN controller receiving data at high volume (from a separate machine sending with "cangen -g 0 -i -x"): The controller signals a huge number of interrupts (hundreds of millions per day) and every second there are about a dozen which are deemed spurious. In theory with high CPU load and the presence of higher priority tasks, the number of incorrectly detected spurious interrupts might increase beyond the 99,900 threshold and cause disablement of the interrupt. In practice it just increments the spurious interrupt count. But that can cause people to waste time investigating it over and over. Fix it by moving the accounting before the invocation of irq_finalize_oneshot(). [ tglx: Folded change log update ] Fixes: 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of threaded irqs") Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Akshay Bhat <akshay.bhat@timesys.com> Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com> Cc: stable@vger.kernel.org # v3.16+ Link: https://lkml.kernel.org/r/1dfd8bbd16163940648045495e3e9698e63b50ad.1539867047.git.lukas@wunner.de
2018-08-13Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull genirq updates from Thomas Gleixner: "The irq departement provides: - A synchronization fix for free_irq() to synchronize just the removed interrupt thread on shared interrupt lines. - Consolidate the multi low level interrupt entry handling and mvoe it to the generic code instead of adding yet another copy for RISC-V - Refactoring of the ARM LPI allocator and LPI exposure to the hypervisor - Yet another interrupt chip driver for the JZ4725B SoC - Speed up for /proc/interrupts as people seem to love reading this file with high frequency - Miscellaneous fixes and updates" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) irqchip/gic-v3-its: Make its_lock a raw_spin_lock_t genirq/irqchip: Remove MULTI_IRQ_HANDLER as it's now obselete openrisc: Use the new GENERIC_IRQ_MULTI_HANDLER arm64: Use the new GENERIC_IRQ_MULTI_HANDLER ARM: Convert to GENERIC_IRQ_MULTI_HANDLER irqchip: Port the ARM IRQ drivers to GENERIC_IRQ_MULTI_HANDLER irqchip/gic-v3-its: Reduce minimum LPI allocation to 1 for PCI devices dt-bindings: irqchip: renesas-irqc: Document r8a77980 support dt-bindings: irqchip: renesas-irqc: Document r8a77470 support irqchip/ingenic: Add support for the JZ4725B SoC irqchip/stm32: Add exti0 translation for stm32mp1 genirq: Remove redundant NULL pointer check in __free_irq() irqchip/gic-v3-its: Honor hypervisor enforced LPI range irqchip/gic-v3: Expose GICD_TYPER in the rdist structure irqchip/gic-v3-its: Drop chunk allocation compatibility irqchip/gic-v3-its: Move minimum LPI requirements to individual busses irqchip/gic-v3-its: Use full range of LPIs irqchip/gic-v3-its: Refactor LPI allocator genirq: Synchronize only with single thread on free_irq() genirq: Update code comments wrt recycled thread_mask ...
2018-08-03genirq: Make force irq threading setup more robustThomas Gleixner
The support of force threading interrupts which are set up with both a primary and a threaded handler wreckaged the setup of regular requested threaded interrupts (primary handler == NULL). The reason is that it does not check whether the primary handler is set to the default handler which wakes the handler thread. Instead it replaces the thread handler with the primary handler as it would do with force threaded interrupts which have been requested via request_irq(). So both the primary and the thread handler become the same which then triggers the warnon that the thread handler tries to wakeup a not configured secondary thread. Fortunately this only happens when the driver omits the IRQF_ONESHOT flag when requesting the threaded interrupt, which is normaly caught by the sanity checks when force irq threading is disabled. Fix it by skipping the force threading setup when a regular threaded interrupt is requested. As a consequence the interrupt request which lacks the IRQ_ONESHOT flag is rejected correctly instead of silently wreckaging it. Fixes: 2a1d3ab8986d ("genirq: Handle force threading of irqs with primary and thread handler") Reported-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de> Cc: stable@vger.kernel.org
2018-07-17genirq: Remove redundant NULL pointer check in __free_irq()RAGHU Halharvi
The NULL pointer check in __free_irq() triggers a 'dereference before NULL pointer check' warning in static code analysis. It turns out that the check is redundant because all callers have a NULL pointer check already. Remove it. Signed-off-by: RAGHU Halharvi <raghuhack78@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20180717102009.7708-1-raghuhack78@gmail.com
2018-06-24genirq: Synchronize only with single thread on free_irq()Lukas Wunner
When pciehp is converted to threaded IRQ handling, removal of unplugged devices below a PCIe hotplug port happens synchronously in the IRQ thread. Removal of devices typically entails a call to free_irq() by their drivers. If those devices share their IRQ with the hotplug port, __free_irq() deadlocks because it calls synchronize_irq() to wait for all hard IRQ handlers as well as all threads sharing the IRQ to finish. Actually it's sufficient to wait only for the IRQ thread of the removed device, so call synchronize_hardirq() to wait for all hard IRQ handlers to finish, but no longer for any threads. Compensate by rearranging the control flow in irq_wait_for_interrupt() such that the device's thread is allowed to run one last time after kthread_stop() has been called. kthread_stop() blocks until the IRQ thread has completed. On completion the IRQ thread clears its oneshot thread_mask bit. This is safe because __free_irq() holds the request_mutex, thereby preventing __setup_irq() from handing out the same oneshot thread_mask bit to a newly requested action. Stack trace for posterity: INFO: task irq/17-pciehp:94 blocked for more than 120 seconds. schedule+0x28/0x80 synchronize_irq+0x6e/0xa0 __free_irq+0x15a/0x2b0 free_irq+0x33/0x70 pciehp_release_ctrl+0x98/0xb0 pcie_port_remove_service+0x2f/0x40 device_release_driver_internal+0x157/0x220 bus_remove_device+0xe2/0x150 device_del+0x124/0x340 device_unregister+0x16/0x60 remove_iter+0x1a/0x20 device_for_each_child+0x4b/0x90 pcie_port_device_remove+0x1e/0x30 pci_device_remove+0x36/0xb0 device_release_driver_internal+0x157/0x220 pci_stop_bus_device+0x7d/0xa0 pci_stop_bus_device+0x3d/0xa0 pci_stop_and_remove_bus_device+0xe/0x20 pciehp_unconfigure_device+0xb8/0x160 pciehp_disable_slot+0x84/0x130 pciehp_ist+0x158/0x190 irq_thread_fn+0x1b/0x50 irq_thread+0x143/0x1a0 kthread+0x111/0x130 Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-pci@vger.kernel.org Link: https://lkml.kernel.org/r/d72b41309f077c8d3bee6cc08ad3662d50b5d22a.1529828292.git.lukas@wunner.de
2018-06-24genirq: Update code comments wrt recycled thread_maskLukas Wunner
Previously a race existed between __free_irq() and __setup_irq() wherein the thread_mask of a just removed action could be handed out to a newly added action and the freed irq thread would then tread on the oneshot mask bit of the newly added irq thread in irq_finalize_oneshot(): time | __free_irq() | raw_spin_lock_irqsave(&desc->lock, flags); | <remove action from linked list> | raw_spin_unlock_irqrestore(&desc->lock, flags); | | __setup_irq() | raw_spin_lock_irqsave(&desc->lock, flags); | <traverse linked list to determine oneshot mask bit> | raw_spin_unlock_irqrestore(&desc->lock, flags); | | irq_thread() of freed irq (__free_irq() waits in synchronize_irq()) | irq_thread_fn() | irq_finalize_oneshot() | raw_spin_lock_irq(&desc->lock); | desc->threads_oneshot &= ~action->thread_mask; | raw_spin_unlock_irq(&desc->lock); v The race was known at least since 2012 when it was documented in a code comment by commit e04268b0effc ("genirq: Remove paranoid warnons and bogus fixups"). The race itself is harmless as nothing touches any of the potentially freed data after synchronize_irq(). In 2017 the race was close by commit 9114014cf4e6 ("genirq: Add mutex to irq desc to serialize request/free_irq()"), apparently inadvertantly so because the race is neither mentioned in the commit message nor was the code comment updated. Make up for that. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-pci@vger.kernel.org Link: https://lkml.kernel.org/r/32fc25aa35ecef4b2692f57687bb7fc2a57230e2.1529828292.git.lukas@wunner.de
2018-06-19genirq: Fix editing error in a commentJonathan Neuschäfer
When the comment was reflowed to a wider format, the "*" snuck in. Fixes: ae88a23b32fa ("irq: refactor and clean up the free_irq() code flow") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20180617124018.25539-1-j.neuschaefer@gmx.net
2018-06-10Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 updates and fixes from Thomas Gleixner: - Fix the (late) fallout from the vector management rework causing hlist corruption and irq descriptor reference leaks caused by a missing sanity check. The straight forward fix triggered another long standing issue to surface. The pre rework code hid the issue due to being way slower, but now the chance that user space sees an EBUSY error return when updating irq affinities is way higher, though quite a bunch of userspace tools do not handle it properly despite the fact that EBUSY could be returned for at least 10 years. It turned out that the EBUSY return can be avoided completely by utilizing the existing delayed affinity update mechanism for irq remapped scenarios as well. That's a bit more error handling in the kernel, but avoids fruitless fingerpointing discussions with tool developers. - Decouple PHYSICAL_MASK from AMD SME as its going to be required for the upcoming Intel memory encryption support as well. - Handle legacy device ACPI detection properly for newer platforms - Fix the wrong argument ordering in the vector allocation tracepoint - Simplify the IDT setup code for the APIC=n case - Use the proper string helpers in the MTRR code - Remove a stale unused VDSO source file - Convert the microcode update lock to a raw spinlock as its used in atomic context. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel_rdt: Enable CMT and MBM on new Skylake stepping x86/apic/vector: Print APIC control bits in debugfs genirq/affinity: Defer affinity setting if irq chip is busy x86/platform/uv: Use apic_ack_irq() x86/ioapic: Use apic_ack_irq() irq_remapping: Use apic_ack_irq() x86/apic: Provide apic_ack_irq() genirq/migration: Avoid out of line call if pending is not set genirq/generic_pending: Do not lose pending affinity update x86/apic/vector: Prevent hlist corruption and leaks x86/vector: Fix the args of vector_alloc tracepoint x86/idt: Simplify the idt_setup_apic_and_irq_gates() x86/platform/uv: Remove extra parentheses x86/mm: Decouple dynamic __PHYSICAL_MASK from AMD SME x86: Mark native_set_p4d() as __always_inline x86/microcode: Make the late update update_lock a raw lock for RT x86/mtrr: Convert to use strncpy_from_user() helper x86/mtrr: Convert to use match_string() helper x86/vdso: Remove unused file x86/i8237: Register device based on FADT legacy boot flag
2018-06-06genirq/affinity: Defer affinity setting if irq chip is busyThomas Gleixner
The case that interrupt affinity setting fails with -EBUSY can be handled in the kernel completely by using the already available generic pending infrastructure. If a irq_chip::set_affinity() fails with -EBUSY, handle it like the interrupts for which irq_chip::set_affinity() can only be invoked from interrupt context. Copy the new affinity mask to irq_desc::pending_mask and set the affinity pending bit. The next raised interrupt for the affected irq will check the pending bit and try to set the new affinity from the handler. This avoids that -EBUSY is returned when an affinity change is requested from user space and the previous change has not been cleaned up. The new affinity will take effect when the next interrupt is raised from the device. Fixes: dccfe3147b42 ("x86/vector: Simplify vector move cleanup") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Song Liu <songliubraving@fb.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <liu.song.a23@gmail.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: stable@vger.kernel.org Cc: Mike Travis <mike.travis@hpe.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Tariq Toukan <tariqt@mellanox.com> Link: https://lkml.kernel.org/r/20180604162224.819273597@linutronix.de
2018-06-05ide: don't enable/disable interrupts in force threaded-IRQ modeSebastian Andrzej Siewior
The interrupts are enabled/disabled so the interrupt handler can run with enabled interrupts while serving the interrupt and not lose other interrupts especially the timer tick. If the system runs with force-threaded interrupts then there is no need to enable the interrupts. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-20genirq: Add missing SPDX identifiersThomas Gleixner
Add SPDX identifiers to files - which contain an explicit license boiler plate or reference - which do not contain a license reference and were not updated in the initial SPDX conversion because the license was deduced by the scanners via EXPORT_SYMBOL_GPL as GPL2.0 only. [ tglx: Moved adding identifiers from the patch which removes the references/boilerplate ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Link: https://lkml.kernel.org/r/20180314212030.668321222@linutronix.de
2018-03-20genirq: Cleanup top of file commentsThomas Gleixner
Remove pointless references to the file name itself and condense the information so it wastes less space. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Link: https://lkml.kernel.org/r/20180314212030.412095827@linutronix.de
2018-03-20genirq: Pass desc to __irq_free instead of irq numberUwe Kleine König
Given that irq_to_desc() is a radix_tree_lookup and the reverse operation is only a pointer dereference and that all callers of __free_irq already have the desc, pass the desc instead of the irq number. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: kernel@pengutronix.de Link: https://lkml.kernel.org/r/20180319105202.9794-1-u.kleine-koenig@pengutronix.de
2018-02-16genirq: Let irq thread follow the effective hard irq affinityThomas Gleixner
In case of threaded interrupts the thread follows the affinity setting of the hard interrupt. The related function uses the affinity mask which was set by either from user space or via one of the kernel mechanisms. This mask can be wider than the resulting effective affinity of the hard interrupt. As a consequence the thread might become affine to a completely different CPU. Use the effective interrupt affinity if the architecture supports it, so the hard interrupt and the thread stay on the same CPU. Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2017-11-14Merge tag 'irqchip-4.15-4' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip updates for 4.15, take #4 from Marc Zyngier - A core irq fix for legacy cases where the irq trigger is not reported by firmware - A couple of GICv3/4 fixes (Kconfig, of-node refcount, error handling) - Trivial pr_err fixes
2017-11-13Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq core updates from Thomas Gleixner: "A rather large update for the interrupt core code and the irq chip drivers: - Add a new bitmap matrix allocator and supporting changes, which is used to replace the x86 vector allocator which comes with separate pull request. This allows to replace the convoluted nested loop allocation function in x86 with a facility which supports the recently added property of managed interrupts proper and allows to switch to a best effort vector reservation scheme, which addresses problems with vector exhaustion. - A large update to the ARM GIC-V3-ITS driver adding support for range selectors. - New interrupt controllers: - Meson and Meson8 GPIO - BCM7271 L2 - Socionext EXIU If you expected that this will stop at some point, I have to disappoint you. There are new ones posted already. Sigh! - STM32 interrupt controller support for new platforms. - A pile of fixes, cleanups and updates to the MIPS GIC driver - The usual small fixes, cleanups and updates all over the place. Most visible one is to move the irq chip drivers Kconfig switches into a separate Kconfig menu" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) genirq: Fix type of shifting literal 1 in __setup_irq() irqdomain: Drop pointless NULL check in virq_debug_show_one genirq/proc: Return proper error code when irq_set_affinity() fails irq/work: Use llist_for_each_entry_safe irqchip: mips-gic: Print warning if inherited GIC base is used irqchip/mips-gic: Add pr_fmt and reword pr_* messages irqchip/stm32: Move the wakeup on interrupt mask irqchip/stm32: Fix initial values irqchip/stm32: Add stm32h7 support dt-bindings/interrupt-controllers: Add compatible string for stm32h7 irqchip/stm32: Add multi-bank management irqchip/stm32: Select GENERIC_IRQ_CHIP irqchip/exiu: Add support for Socionext Synquacer EXIU controller dt-bindings: Add description of Socionext EXIU interrupt controller irqchip/gic-v3-its: Fix VPE activate callback return value irqchip: mips-gic: Make IPI bitmaps static irqchip: mips-gic: Share register writes in gic_set_type() irqchip: mips-gic: Remove gic_vpes variable irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs irqchip: mips-gic: Configure EIC when CPUs come online ...
2017-11-12genirq: Fix type of shifting literal 1 in __setup_irq()Rasmus Villemoes
If ffz() ever returns a value >= 31 then the following shift is undefined behaviour because the literal 1 which gets shifted is treated as signed integer. In practice, the bug is probably harmless, since the first undefined shift count is 31 which results - ignoring UB - in (int)(0x80000000). This gets sign extended so bit 32-63 will be set as well and all subsequent __setup_irq() calls would just end up hitting the -EBUSY branch. However, a sufficiently aggressive optimizer may use the UB of 1<<31 to decide that doesn't happen, and hence elide the sign-extension code, so that subsequent calls can indeed get ffz > 31. In any case, the right thing to do is to make the literal 1UL. [ tglx: For this to happen a single interrupt would have to be shared by 32 devices. Hardware like that does not exist and would have way more problems than that. ] Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20171030213548.16831-1-linux@rasmusvillemoes.dk
2017-11-10genirq: Track whether the trigger type has been setMarc Zyngier
When requesting a shared interrupt, we assume that the firmware support code (DT or ACPI) has called irqd_set_trigger_type already, so that we can retrieve it and check that the requester is being reasonnable. Unfortunately, we still have non-DT, non-ACPI systems around, and these guys won't call irqd_set_trigger_type before requesting the interrupt. The consequence is that we fail the request that would have worked before. We can either chase all these use cases (boring), or address it in core code (easier). Let's have a per-irq_desc flag that indicates whether irqd_set_trigger_type has been called, and let's just check it when checking for a shared interrupt. If it hasn't been set, just take whatever the interrupt requester asks. Fixes: 382bd4de6182 ("genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs") Cc: stable@vger.kernel.org Reported-and-tested-by: Petr Cvek <petrcvekcz@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-29genirq: Document vcpu_info usage for percpu_devid interruptsChristoffer Dall
It is currently unclear how to set the VCPU affinity for a percpu_devid interrupt , since the Linux irq_data structure describes the state for multiple interrupts, one for each physical CPU on the system. Since each such interrupt can be associated with different VCPUs or none at all, associating a single VCPU state with such an interrupt does not capture the necessary semantics. The implementers of irq_set_affinity are the Intel and AMD IOMMUs, and the ARM GIC irqchip. The Intel and AMD callers do not appear to use percpu_devid interrupts, and the ARM GIC implementation only checks the pointer against NULL vs. non-NULL. Therefore, simply update the function documentation to explain the expected use in the context of percpu_devid interrupts, allowing future changes or additions to irqchip implementers to do the right thing. Signed-off-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: kvm@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Eric Auger <eric.auger@redhat.com> Cc: kvmarm@lists.cs.columbia.edu Cc: linux-arm-kernel@lists.infradead.org Link: https://lkml.kernel.org/r/1509093281-15225-13-git-send-email-cdall@linaro.org
2017-10-09genirq/cpuhotplug: Enforce affinity setting on startup of managed irqsThomas Gleixner
Managed interrupts can end up in a stale state on CPU hotplug. If the interrupt is not targeting a single CPU, i.e. the affinity mask spawns multiple CPUs then the following can happen: After boot: dstate: 0x01601200 IRQD_ACTIVATED IRQD_IRQ_STARTED IRQD_SINGLE_TARGET IRQD_AFFINITY_SET IRQD_AFFINITY_MANAGED node: 0 affinity: 24-31 effectiv: 24 pending: 0 After offlining CPU 31 - 24 dstate: 0x01a31000 IRQD_IRQ_DISABLED IRQD_IRQ_MASKED IRQD_SINGLE_TARGET IRQD_AFFINITY_SET IRQD_AFFINITY_MANAGED IRQD_MANAGED_SHUTDOWN node: 0 affinity: 24-31 effectiv: 24 pending: 0 Now CPU 25 gets onlined again, so it should get the effective interrupt affinity for this interruopt, but due to the x86 interrupt affinity setter restrictions this ends up after restarting the interrupt with: dstate: 0x01601300 IRQD_ACTIVATED IRQD_IRQ_STARTED IRQD_SINGLE_TARGET IRQD_AFFINITY_SET IRQD_SETAFFINITY_PENDING IRQD_AFFINITY_MANAGED node: 0 affinity: 24-31 effectiv: 24 pending: 24-31 So the interrupt is still affine to CPU 24, which was the last CPU to go offline of that affinity set and the move to an online CPU within 24-31, in this case 25, is pending. This mechanism is x86/ia64 specific as those architectures cannot move interrupts from thread context and do this when an interrupt is actually handled. So the move is set to pending. Whats worse is that offlining CPU 25 again results in: dstate: 0x01601300 IRQD_ACTIVATED IRQD_IRQ_STARTED IRQD_SINGLE_TARGET IRQD_AFFINITY_SET IRQD_SETAFFINITY_PENDING IRQD_AFFINITY_MANAGED node: 0 affinity: 24-31 effectiv: 24 pending: 24-31 This means the interrupt has not been shut down, because the outgoing CPU is not in the effective affinity mask, but of course nothing notices that the effective affinity mask is pointing at an offline CPU. In the case of restarting a managed interrupt the move restriction does not apply, so the affinity setting can be made unconditional. This needs to be done _before_ the interrupt is started up as otherwise the condition for moving it from thread context would not longer be fulfilled. With that change applied onlining CPU 25 after offlining 31-24 results in: dstate: 0x01600200 IRQD_ACTIVATED IRQD_IRQ_STARTED IRQD_SINGLE_TARGET IRQD_AFFINITY_MANAGED node: 0 affinity: 24-31 effectiv: 25 pending: And after offlining CPU 25: dstate: 0x01a30000 IRQD_IRQ_DISABLED IRQD_IRQ_MASKED IRQD_SINGLE_TARGET IRQD_AFFINITY_MANAGED IRQD_MANAGED_SHUTDOWN node: 0 affinity: 24-31 effectiv: 25 pending: which is the correct and expected result. Fixes: 761ea388e8c4 ("genirq: Handle managed irqs gracefully in irq_startup()") Reported-by: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: axboe@kernel.dk Cc: linux-scsi@vger.kernel.org Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: mpe@ellerman.id.au Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: keith.busch@intel.com Cc: peterz@infradead.org Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
2017-10-09genirq: Warn when effective affinity is not updatedThomas Gleixner
Emit a one time warning when the effective affinity mask is enabled in Kconfig, but the interrupt chip does not update the mask in its irq_set_affinity() callback, Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
2017-09-25genirq: Separate activation and startupThomas Gleixner
Activation of an interrupt and startup are currently a combo functionlity. That works so far, but upcoming changes require a strict separation because the activation can fail in future. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.754334077@linutronix.de
2017-09-25genirq/debugfs: Show debug information for all irq descriptorsThomas Gleixner
Currently the debugfs shows only information about actively used interrupts like /proc/irq/ does. That's fine for most cases, but not helpful when internals of allocated, but unused interrupt descriptors have to debugged. It's also useful to provide information about all descriptors so leaks can be debugged in a simpler way. Move the debugfs registration to the descriptor allocation code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.355525908@linutronix.de
2017-09-25genirq: Check __free_irq() return value for NULLAlexandru Moise
__free_irq() can return a NULL irqaction for example when trying to free already-free IRQ, but the callsite unconditionally dereferences the returned pointer. Fix this by adding a check and return NULL. Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20170919200412.GA29985@gmail.com
2017-08-23genirq: Let irq_set_vcpu_affinity() iterate over hierarchyMarc Zyngier
When assigning an interrupt to a vcpu, it is not unlikely that the level of the hierarchy implementing irq_set_vcpu_affinity is not the top level (think a generic MSI domain on top of a virtualization aware interrupt controller). In such a case, let's iterate over the hierarchy until we find an irqchip implementing it. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-07-12genirq: Keep chip buslock across irq_request/release_resources()Thomas Gleixner
Moving the irq_request/release_resources() callbacks out of the spinlocked, irq disabled and bus locked region, unearthed an interesting abuse of the irq_bus_lock/irq_bus_sync_unlock() callbacks. The OMAP GPIO driver does merily power management inside of them. The irq_request_resources() callback of this GPIO irqchip calls a function which reads a GPIO register. That read aborts now because the clock of the GPIO block is not magically enabled via the irq_bus_lock() callback. Move the callbacks under the bus lock again to prevent this. In the free_irq() path this requires to drop the bus_lock before calling synchronize_irq() and reaquiring it before calling the irq_release_resources() callback. The bus lock can't be held because: 1) The data which has been changed between bus_lock/un_lock is cached in the irq chip driver private data and needs to go out to the irq chip via the slow bus (usually SPI or I2C) before calling synchronize_irq(). That's the reason why this bus_lock/unlock magic exists in the first place, as you cannot do SPI/I2C transactions while holding desc->lock with interrupts disabled. 2) synchronize_irq() will actually deadlock, if there is a handler on flight. These chips use threaded handlers for obvious reasons, as they allow to do SPI/I2C communication. When the threaded handler returns then bus_lock needs to be taken in irq_finalize_oneshot() as we need to talk to the actual irq chip once more. After that the threaded handler is marked done, which makes synchronize_irq() return. So if we hold bus_lock accross the synchronize_irq() call, the handler cannot mark itself done because it blocks on the bus lock. That in turn makes synchronize_irq() wait forever on the threaded handler to complete.... Add the missing unlock of desc->request_mutex in the error path of __free_irq() and add a bunch of comments to explain the locking and protection rules. Fixes: 46e48e257360 ("genirq: Move irq resource handling out of spinlocked region") Reported-and-tested-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reported-and-tested-by: Tony Lindgren <tony@atomide.com> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Not-longer-ranted-at-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Marc Zyngier <marc.zyngier@arm.com>
2017-07-06genirq: Allow to pass the IRQF_TIMER flag with percpu irq requestDaniel Lezcano
The irq timings infrastructure tracks when interrupts occur in order to statistically predict te next interrupt event. There is no point to track timer interrupts and try to predict them because the next expiration time is already known. This can be avoided via the IRQF_TIMER flag which is passed by timer drivers in request_irq(). It marks the interrupt as timer based which alloes to ignore these interrupts in the timings code. Per CPU interrupts which are requested via request_percpu_+irq() have no flag argument, so marking per cpu timer interrupts is not possible and they get tracked pointlessly. Add __request_percpu_irq() as a variant of request_percpu_irq() with a flags argument and make request_percpu_irq() an inline wrapper passing flags = 0. The flag parameter is restricted to IRQF_TIMER as all other IRQF_ flags make no sense for per cpu interrupts. The next step is to convert all existing users of request_percpu_irq() and then remove the wrapper and the underscores. [ tglx: Massaged changelog ] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: nicolas.pitre@linaro.org Cc: vincent.guittot@linaro.org Cc: rafael@kernel.org Link: http://lkml.kernel.org/r/1499344144-3964-1-git-send-email-daniel.lezcano@linaro.org
2017-07-04genirq/timings: Move free timings out of spinlocked regionThomas Gleixner
No point to do memory management from a interrupt disabled spin locked region. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Julia Cartwright <julia@ni.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Cc: linux-rockchip@lists.infradead.org Cc: John Keeping <john@metanate.com> Cc: linux-gpio@vger.kernel.org Link: http://lkml.kernel.org/r/20170629214344.196130646@linutronix.de
2017-07-04genirq: Move irq resource handling out of spinlocked regionThomas Gleixner
Aside of being conceptually wrong, there is also an actual (hard to trigger and mostly theoretical) problem. CPU0 CPU1 free_irq(X) interrupt X spin_lock(desc->lock) wake irq thread() spin_unlock(desc->lock) spin_lock(desc->lock) remove action() shutdown_irq() release_resources() thread_handler() spin_unlock(desc->lock) access released resources. synchronize_irq() Move the release resources invocation after synchronize_irq() so it's guaranteed that the threaded handler has finished. Move the resource request call out of the desc->lock held region as well, so the invocation context is the same for both request and release. This solves the problems with those functions on RT as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Julia Cartwright <julia@ni.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Cc: linux-rockchip@lists.infradead.org Cc: John Keeping <john@metanate.com> Cc: linux-gpio@vger.kernel.org Link: http://lkml.kernel.org/r/20170629214344.117028181@linutronix.de
2017-07-04genirq: Add mutex to irq desc to serialize request/free_irq()Thomas Gleixner
The irq_request/release_resources() callbacks ar currently invoked under desc->lock with interrupts disabled. This is a source of problems on RT and conceptually not required. Add a seperate mutex to struct irq_desc which allows to serialize request/free_irq(), which can be used to move the resource functions out of the desc->lock held region. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Julia Cartwright <julia@ni.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Cc: linux-rockchip@lists.infradead.org Cc: John Keeping <john@metanate.com> Cc: linux-gpio@vger.kernel.org Link: http://lkml.kernel.org/r/20170629214344.039220922@linutronix.de
2017-07-04genirq: Move bus locking into __setup_irq()Thomas Gleixner
There is no point in having the irq_bus_lock() protection around all callers to __setup_irq(). Move it into __setup_irq(). This is also a preparatory patch for addressing the issues with the irq resource callbacks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Julia Cartwright <julia@ni.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Cc: linux-rockchip@lists.infradead.org Cc: John Keeping <john@metanate.com> Cc: linux-gpio@vger.kernel.org Link: http://lkml.kernel.org/r/20170629214343.960949031@linutronix.de
2017-06-24genirq/timings: Add infrastructure to track the interrupt timingsDaniel Lezcano
The interrupt framework gives a lot of information about each interrupt. It does not keep track of when those interrupts occur though, which is a prerequisite for estimating the next interrupt arrival for power management purposes. Add a mechanism to record the timestamp for each interrupt occurrences in a per-CPU circular buffer to help with the prediction of the next occurrence using a statistical model. Each CPU can store up to IRQ_TIMINGS_SIZE events <irq, timestamp>, the current value of IRQ_TIMINGS_SIZE is 32. Each event is encoded into a single u64, where the high 48 bits are used for the timestamp and the low 16 bits are for the irq number. A static key is introduced so when the irq prediction is switched off at runtime, the overhead is near to zero. It results in most of the code in internals.h for inline reasons and a very few in the new file timings.c. The latter will contain more in the next patch which will provide the statistical model for the next event prediction. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-1-git-send-email-daniel.lezcano@linaro.org
2017-06-22genirq: Add force argument to irq_startup()Thomas Gleixner
In order to handle managed interrupts gracefully on irq_startup() so they won't lose their assigned affinity, it's necessary to allow startups which keep the interrupts in managed shutdown state, if none of the assigend CPUs is online. This allows drivers to request interrupts w/o the CPUs being online, which avoid online/offline churn in drivers. Add a force argument which can override that decision and let only request_irq() and enable_irq() allow the managed shutdown handling. enable_irq() is required, because the interrupt might be requested with IRQF_NOAUTOEN and enable_irq() invokes irq_startup() which would then wreckage the assignment again. All other callers force startup and potentially break the assigned affinity. No functional change as this only adds the function argument. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235447.112094565@linutronix.de
2017-06-22genirq: Move pending helpers to internal.hChristoph Hellwig
So that the affinity code can reuse them. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170619235445.109426284@linutronix.de
2017-06-22genirq: Move initial affinity setup to irq_startup()Thomas Gleixner
The startup vs. setaffinity ordering of interrupts depends on the IRQF_NOAUTOEN flag. Chained interrupts are not getting any affinity assignment at all. A regular interrupt is started up and then the affinity is set. A IRQF_NOAUTOEN marked interrupt is not started up, but the affinity is set nevertheless. Move the affinity setup to startup_irq() so the ordering is always the same and chained interrupts get the proper default affinity assigned as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235445.020534783@linutronix.de
2017-06-22genirq: Rename setup_affinity() to irq_setup_affinity()Thomas Gleixner
Rename it with a proper irq_ prefix and make it available for other files in the core code. Preparatory patch for moving the irq affinity setup around. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.928501004@linutronix.de
2017-06-22genirq: Remove mask argument from setup_affinity()Thomas Gleixner
No point to have this alloc/free dance of cpumasks. Provide a static mask for setup_affinity() and protect it proper. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.851571573@linutronix.de
2017-06-22genirq/debugfs: Add proper debugfs interfaceThomas Gleixner
Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>