summaryrefslogtreecommitdiff
path: root/kernel/irq/proc.c
AgeCommit message (Collapse)Author
2018-06-22genirq: Speedup show_interrupts()Eric Dumazet
Since commit 425a5072dcd1 ("genirq: Free irq_desc with rcu"), show_interrupts() can be switched to rcu locking, which removes possible contention on sparse_irq_lock. The per_cpu count scan and print can be done without holding desc spinlock. And there is no need to call kstat_irqs_cpu() and abuse irq_to_desc() while holding rcu read lock, since desc and desc->kstat_irqs wont disappear or change. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Eric Dumazet <eric.dumazet@gmail.com> Link: https://lkml.kernel.org/r/20180620150332.163320-1-edumazet@google.com
2018-05-16proc: introduce proc_create_single{,_data}Christoph Hellwig
Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-03-20genirq: Cleanup top of file commentsThomas Gleixner
Remove pointless references to the file name itself and condense the information so it wastes less space. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Link: https://lkml.kernel.org/r/20180314212030.412095827@linutronix.de
2017-11-13Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq core updates from Thomas Gleixner: "A rather large update for the interrupt core code and the irq chip drivers: - Add a new bitmap matrix allocator and supporting changes, which is used to replace the x86 vector allocator which comes with separate pull request. This allows to replace the convoluted nested loop allocation function in x86 with a facility which supports the recently added property of managed interrupts proper and allows to switch to a best effort vector reservation scheme, which addresses problems with vector exhaustion. - A large update to the ARM GIC-V3-ITS driver adding support for range selectors. - New interrupt controllers: - Meson and Meson8 GPIO - BCM7271 L2 - Socionext EXIU If you expected that this will stop at some point, I have to disappoint you. There are new ones posted already. Sigh! - STM32 interrupt controller support for new platforms. - A pile of fixes, cleanups and updates to the MIPS GIC driver - The usual small fixes, cleanups and updates all over the place. Most visible one is to move the irq chip drivers Kconfig switches into a separate Kconfig menu" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) genirq: Fix type of shifting literal 1 in __setup_irq() irqdomain: Drop pointless NULL check in virq_debug_show_one genirq/proc: Return proper error code when irq_set_affinity() fails irq/work: Use llist_for_each_entry_safe irqchip: mips-gic: Print warning if inherited GIC base is used irqchip/mips-gic: Add pr_fmt and reword pr_* messages irqchip/stm32: Move the wakeup on interrupt mask irqchip/stm32: Fix initial values irqchip/stm32: Add stm32h7 support dt-bindings/interrupt-controllers: Add compatible string for stm32h7 irqchip/stm32: Add multi-bank management irqchip/stm32: Select GENERIC_IRQ_CHIP irqchip/exiu: Add support for Socionext Synquacer EXIU controller dt-bindings: Add description of Socionext EXIU interrupt controller irqchip/gic-v3-its: Fix VPE activate callback return value irqchip: mips-gic: Make IPI bitmaps static irqchip: mips-gic: Share register writes in gic_set_type() irqchip: mips-gic: Remove gic_vpes variable irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs irqchip: mips-gic: Configure EIC when CPUs come online ...
2017-11-12genirq/proc: Return proper error code when irq_set_affinity() failsWen Yaxng
write_irq_affinity() returns the number of written bytes, which means success, unconditionally whether the actual irq_set_affinity() call succeeded or not. Add proper error handling and pass the error code returned from irq_set_affinity() back to user space in case of failure. [ tglx: Fixed coding style and massaged changelog ] Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn> Cc: zhong.weidong@zte.com.cn Link: https://lkml.kernel.org/r/1510106103-184761-1-git-send-email-wen.yang99@zte.com.cn
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-25genirq/proc: Avoid uninitalized variable warningThomas Gleixner
kernel/irq/proc.c: In function ‘show_irq_affinity’: include/linux/cpumask.h:24:29: warning: ‘mask’ may be used uninitialized in this function [-Wmaybe-uninitialized] #define cpumask_bits(maskp) ((maskp)->bits) gcc is silly, but admittedly it can't know that this won't be called with anything else than the enumerated constants. Shut up the warning by creating a default clause. Fixes: 6bc6d4abd22e ("genirq/proc: Use the the accessor to report the effective affinity Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-08-25genirq: Fix semicolon.cocci warningskbuild test robot
kernel/irq/proc.c:69:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 0d3f54257dc3 ("genirq: Introduce effective affinity mask") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: kbuild-all@01.org Link: http://lkml.kernel.org/r/20170822075053.GA93890@lkp-hsx02
2017-08-18genirq/proc: Use the the accessor to report the effective affinityMarc Zyngier
If CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK is defined, but that the interrupt is not single target, the effective affinity reported in /proc/irq/x/effective_affinity will be empty, which is not the truth. Instead, use the accessor to report the affinity, which will pick the right mask. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Chris Zankel <chris@zankel.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: http://lkml.kernel.org/r/20170818083925.10108-3-marc.zyngier@arm.com
2017-06-22genirq: Introduce effective affinity maskThomas Gleixner
There is currently no way to evaluate the effective affinity mask of a given interrupt. Many irq chips allow only a single target CPU or a subset of CPUs in the affinity mask. Updating the mask at the time of setting the affinity to the subset would be counterproductive because information for cpu hotplug about assigned interrupt affinities gets lost. On CPU hotplug it's also pointless to force migrate an interrupt, which is not targeted at the CPU effectively. But currently the information is not available. Provide a seperate mask to be updated by the irq_chip->irq_set_affinity() implementations. Implement the read only proc files so the user can see the effective mask as well w/o trying to deduce it from /proc/interrupts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235446.247834245@linutronix.de
2017-06-22genirq/proc: Replace ever repeating type castThomas Gleixner
The proc file setup repeats the same ugly type cast for the irq number over and over. Do it once and hand in the local void pointer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235446.160866358@linutronix.de
2017-06-22genirq: Remove pointless arg from show_irq_affinityThomas Gleixner
The third argument of the internal helper function is unused. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235446.004958600@linutronix.de
2017-06-22genirq: Remove mask argument from setup_affinity()Thomas Gleixner
No point to have this alloc/free dance of cpumasks. Provide a static mask for setup_affinity() and protect it proper. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.851571573@linutronix.de
2017-02-10genirq: Fix /proc/interrupts output alignmentH Hartley Sweeten
If the irq_desc being output does not have a domain associated the information following the 'name' is not aligned correctly. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Link: http://lkml.kernel.org/r/20170210165416.5629-1-hsweeten@visionengravers.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-04Merge branch 'irq/for-block' into irq/coreThomas Gleixner
Pull the irq affinity managing code which is in a seperate branch for block developers to pull.
2016-07-04genirq: Introduce IRQD_AFFINITY_MANAGED flagThomas Gleixner
Interupts marked with this flag are excluded from user space interrupt affinity changes. Contrary to the IRQ_NO_BALANCING flag, the kernel internal affinity mechanism is not blocked. This flag will be used for multi-queue device interrupts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: axboe@fb.com Cc: agordeev@redhat.com Link: http://lkml.kernel.org/r/1467621574-8277-3-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-06-10genirq: Remove unnecessary memset() callsWeongyo Jeong
sprintf() and snprintf() implementation of kernel guarantees that its result is terminated with null byte if size is larger than 0. So we don't need to call memset() at all. Signed-off-by: Weongyo Jeong <weongyo.linux@gmail.com> Link: http://lkml.kernel.org/r/1459451703-5744-1-git-send-email-weongyo.linux@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-06-10genirq: Remove redundant NULL check of irq_descJianyu Zhan
for_each_irq_desc() macro has already skipped NULL irq_desc, don't bother to check it again. Signed-off-by: Jianyu Zhan <nasa4836@gmail.com> Cc: mingo@kernel.org Cc: yhlu.kernel@gmail.com Link: http://lkml.kernel.org/r/1458395959-7046-1-git-send-email-nasa4836@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-15genirq: Use a common macro to go through the actions listDaniel Lezcano
The irq code browses the list of actions differently to inspect the element one by one. Even if it is not a problem, for the sake of consistent code, provide a macro similar to for_each_irq_desc in order to have the same loop to go through the actions list and use it in the code. [ tglx: Renamed the macro ] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1452765253-31148-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-10genirq/PM: Restore system wake up from chained interruptsGrygorii Strashko
Commit e509bd7da149 ("genirq: Allow migration of chained interrupts by installing default action") breaks PCS wake up IRQ behaviour on TI OMAP based platforms (dra7-evm). TI OMAP IRQ wake up configuration: GIC-irqchip->PCM_IRQ |- omap_prcm_register_chain_handler |- PRCM-irqchip -> PRCM_IO_IRQ |- pcs_irq_chain_handler |- pinctrl-irqchip -> PCS_uart1_wakeup_irq This happens because IRQ PM code (irq/pm.c) is expected to ignore chained interrupts by default: static bool suspend_device_irq(struct irq_desc *desc) { if (!desc->action || desc->no_suspend_depth) return false; - it's expected !desc->action = true for chained interrupts; but, after above change, all chained interrupt descriptors will have default action handler installed - chained_action. As result, chained interrupts will be silently disabled during system suspend. Hence, fix it by introducing helper function irq_desc_is_chained() and use it in suspend_device_irq() for chained interrupts identification and skip them, once detected. Fixes: e509bd7da149 ("genirq: Allow migration of chained interrupts..") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Tony Lindgren <tony@atomide.com> Cc: <nsekhar@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tony Lindgren <tony@atomide.com> Link: http://lkml.kernel.org/r/1447149492-20699-1-git-send-email-grygorii.strashko@ti.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13Merge branch 'linus' into irq/coreThomas Gleixner
Bring in upstream updates for patches which depend on them
2015-10-09genirq: Allow migration of chained interrupts by installing default actionMika Westerberg
When a CPU is offlined all interrupts that have an action are migrated to other still online CPUs. However, if the interrupt has chained handler installed this is not done. Chained handlers are used by GPIO drivers which support interrupts, for instance. When the affinity is not corrected properly we end up in situation where most interrupts are not arriving to the online CPUs anymore. For example on Intel Braswell system which has SD-card card detection signal connected to a GPIO the IO-APIC routing entries look like below after CPU1 is offlined: pin30, enabled , level, low , V(52), IRR(0), S(0), logical , D(03), M(1) pin31, enabled , level, low , V(42), IRR(0), S(0), logical , D(03), M(1) pin32, enabled , level, low , V(62), IRR(0), S(0), logical , D(03), M(1) pin5b, enabled , level, low , V(72), IRR(0), S(0), logical , D(03), M(1) The problem here is that the destination mask still contains both CPUs even if CPU1 is already offline. This means that the IO-APIC still routes interrupts to the other CPU as well. We solve the problem by providing a default action for chained interrupts. This action allows the migration code to correct affinity (as it finds desc->action != NULL). Also make the default action handler to emit a warning if for some reason a chained handler ends up calling it. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Link: http://lkml.kernel.org/r/1444039935-30475-1-git-send-email-mika.westerberg@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-01genirq: Fix race in register_irq_proc()Ben Hutchings
Per-IRQ directories in procfs are created only when a handler is first added to the irqdesc, not when the irqdesc is created. In the case of a shared IRQ, multiple tasks can race to create a directory. This race condition seems to have been present forever, but is easier to hit with async probing. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Link: http://lkml.kernel.org/r/1443266636.2004.2.camel@decadent.org.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org
2015-09-16genirq: Move field 'affinity' from irq_data into irq_common_dataJiang Liu
Irq affinity mask is per-irq instead of per irqchip, so move it into struct irq_common_data. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/1433303281-27688-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12genirq: Introduce helper function irq_data_get_node()Jiang Liu
Introduce helper function irq_data_get_node() and variants thereof to hide struct irq_data implementation details. Convert the core code to use them. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/1433145945-789-5-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-02-13irq: use %*pb[l] to print bitmaps including cpumasks and nodemasksTejun Heo
printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13genirq: Prevent proc race against freeing of irq descriptorsThomas Gleixner
Since the rework of the sparse interrupt code to actually free the unused interrupt descriptors there exists a race between the /proc interfaces to the irq subsystem and the code which frees the interrupt descriptor. CPU0 CPU1 show_interrupts() desc = irq_to_desc(X); free_desc(desc) remove_from_radix_tree(); kfree(desc); raw_spinlock_irq(&desc->lock); /proc/interrupts is the only interface which can actively corrupt kernel memory via the lock access. /proc/stat can only read from freed memory. Extremly hard to trigger, but possible. The interfaces in /proc/irq/N/ are not affected by this because the removal of the proc file is serialized in procfs against concurrent readers/writers. The removal happens before the descriptor is freed. For architectures which have CONFIG_SPARSE_IRQ=n this is a non issue as the descriptor is never freed. It's merely cleared out with the irq descriptor lock held. So any concurrent proc access will either see the old correct value or the cleared out ones. Protect the lookup and access to the irq descriptor in show_interrupts() with the sparse_irq_lock. Provide kstat_irqs_usr() which is protecting the lookup and access with sparse_irq_lock and switch /proc/stat to use it. Document the existing kstat_irqs interfaces so it's clear that the caller needs to take care about protection. The users of these interfaces are either not affected due to SPARSE_IRQ=n or already protected against removal. Fixes: 1f5a5b87f78f "genirq: Implement a sane sparse_irq allocator" Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org
2014-03-19genirq: procfs: Make smp_affinity values go+rChema Gonzalez
Includes: - /proc/irq/default_smp_affinity - /proc/irq/*/affinity_hint - /proc/irq/*/smp_affinity - /proc/irq/*/smp_affinity_list Users can distill the same information by reading /proc/interrupts. Signed-off-by: Chema Gonzalez <chema@google.com> Cc: Eric Dumazet <edumazet@google.com> Link: http://lkml.kernel.org/r/1394765455-1217-1-git-send-email-chema@google.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-24irqdomain: Include hwirq number in /proc/interruptsGrant Likely
Add the hardware interrupt number to the output of /proc/interrupts. It is often important to have access to the hardware interrupt number because it identifies exactly how an interrupt signal is wired up to the interrupt controller. This is especially important when using irq_domains since irq numbers get dynamically allocated in that case, and have no relation to the actual hardware number. Note: This output is currently conditional on whether or not the irq_domain pointer is set; however hwirq could still be used without irq_domain. It may be worthwhile to always output the hwirq number regardless of the domain pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Olof Johansson <olof@lixom.net> Cc: Ben Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-05-01proc: Supply a function to remove a proc entry by PDEDavid Howells
Supply a function (proc_remove()) to remove a proc entry (and any subtree rooted there) by proc_dir_entry pointer rather than by name and (optionally) root dir entry pointer. This allows us to eliminate all remaining pde->name accesses outside of procfs. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Grant Likely <grant.likely@linaro.or> cc: linux-acpi@vger.kernel.org cc: openipmi-developer@lists.sourceforge.net cc: devicetree-discuss@lists.ozlabs.org cc: linux-pci@vger.kernel.org cc: netdev@vger.kernel.org cc: netfilter-devel@vger.kernel.org cc: alsa-devel@alsa-project.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09procfs: new helper - PDE_DATA(inode)Al Viro
The only part of proc_dir_entry the code outside of fs/proc really cares about is PDE(inode)->data. Provide a helper for that; static inline for now, eventually will be moved to fs/proc, along with the knowledge of struct proc_dir_entry layout. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22new helper: file_inode(file)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-26irq: Remove smp_affinity_list when unregister irq procYinghai Lu
commit 4b06042(bitmap, irq: add smp_affinity_list interface to /proc/irq) causes the following warning: [ 274.239500] WARNING: at fs/proc/generic.c:850 remove_proc_entry+0x24c/0x27a() [ 274.251761] remove_proc_entry: removing non-empty directory 'irq/184', leaking at least 'smp_affinity_list' Remove the new file in the exit path. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Mike Travis <travis@sgi.com> Link: http://lkml.kernel.org/r/4DDDE094.6050505@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-25bitmap, irq: add smp_affinity_list interface to /proc/irqMike Travis
Manually adjusting the smp_affinity for IRQ's becomes unwieldy when the cpu count is large. Setting smp affinity to cpus 256 to 263 would be: echo 000000ff,00000000,00000000,00000000,00000000,00000000,00000000,00000000 > smp_affinity instead of: echo 256-263 > smp_affinity_list Think about what it looks like for cpus around say, 4088 to 4095. We already have many alternate "list" interfaces: /sys/devices/system/cpu/cpuX/indexY/shared_cpu_list /sys/devices/system/cpu/cpuX/topology/thread_siblings_list /sys/devices/system/cpu/cpuX/topology/core_siblings_list /sys/devices/system/node/nodeX/cpulist /sys/devices/pci***/***/local_cpulist Add a companion interface, smp_affinity_list to use cpu lists instead of cpu maps. This conforms to other companion interfaces where both a map and a list interface exists. This required adding a bitmap_parselist_user() function in a manner similar to the bitmap_parse_user() function. [akpm@linux-foundation.org: make __bitmap_parselist() static] Signed-off-by: Mike Travis <travis@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jack Steiner <steiner@sgi.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-02genirq: Fix typo CONFIG_GENIRC_IRQ_SHOW_LEVELGeert Uytterhoeven
commit ab7798ffcf98b11a9525cf65bacdae3fd58d357f ("genirq: Expand generic show_interrupts()") added the Kconfig option GENERIC_IRQ_SHOW_LEVEL to accomodate PowerPC, but this doesn't actually enable the functionality due to a typo in the #ifdef check. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linux/PPC Development <linuxppc-dev@lists.ozlabs.org> Link: http://lkml.kernel.org/r/%3Calpine.DEB.2.00.1104302251370.19068%40ayla.of.borg%3E Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29alpha: Use generic show_interrupts()Thomas Gleixner
The only subtle difference is that alpha uses ACTUAL_NR_IRQS and prints the IRQF_DISABLED flag. Change the generic implementation to deal with ACTUAL_NR_IRQS if defined. The IRQF_DISABLED printing is pointless, as we nowadays run all interrupts with irqs disabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-25genirq: Expand generic show_interrupts()Thomas Gleixner
Some archs want to print extra information for certain irq_chips which is per irq and not per chip. Allow them to provide a chip callback to print the chip name and the extra information. PowerPC wants to print the LEVEL/EDGE type information. Make it configurable. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-17genirq: show_interrupts: Check desc->name before printing it blindlyThomas Gleixner
desc->name is not required and not used by all architectures. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Reuse existing can set affinty checkThomas Gleixner
Add a !desc check while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add IRQ_MOVE_PENDING to irq_data.stateThomas Gleixner
chip implementations need to know about it. Keep status in sync until all users are fixed. Accessor function: irqd_is_setaffinity_pending(irqdata) Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Implement generic irq_show_interrupts()Thomas Gleixner
All archs implement show_interrupts() in more or less the same way. That's tons of duplicated code with different bugs with no value. Implement a generic version and deprecate show_interrupts() Unfortunately we need some ifdeffery for !GENERIC_HARDIRQ archs. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Do not copy affinity before setThomas Gleixner
While rumaging through arch code I found that there are a few workarounds which deal with the fact that the initial affinity setting from request_irq() copies the mask into irq_data->affinity before the chip code is called. In the normal path we unconditionally copy the mask when the chip code returns 0. Copy after the code is called and add a return code IRQ_SET_MASK_OK_NOCOPY for the chip functions, which prevents the copy. That way we see the real mask when the chip function decided to truncate it further as some arches do. IRQ_SET_MASK_OK is 0, which is the current behaviour. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-01genirq: Fix incorrect proc spurious outputKenji Kaneshige
Since commit a1afb637(switch /proc/irq/*/spurious to seq_file) all /proc/irq/XX/spurious files show the information of irq 0. Current irq_spurious_proc_open() passes on NULL as the 3rd argument, which is used as an IRQ number in irq_spurious_proc_show(), to the single_open(). Because of this, all the /proc/irq/XX/spurious file shows IRQ 0 information regardless of the IRQ number. To fix the problem, irq_spurious_proc_open() must pass on the appropreate data (IRQ number) to single_open(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Yong Zhang <yong.zhang0@gmail.com> LKML-Reference: <4CF4B778.90604@jp.fujitsu.com> Cc: stable@kernel.org [2.6.33+] Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-12genirq: Prepare proc for real sparse irq supportThomas Gleixner
/proc/irq never removes any entries, but when irq descriptors can be freed for real this is necessary. Otherwise we'd reference a freed descriptor in /proc/irq/N Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Provide compat handling for chip->set_affinity()Thomas Gleixner
Wrap the old chip function set_affinity() until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121842.732894108@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04genirq: Convert core code to irq_dataThomas Gleixner
Convert all references in the core code to orq, chip, handler_data, chip_data, msi_desc, affinity to irq_data.* Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-05-12genirq: Clear CPU mask in affinity_hint when none is providedPeter P Waskiewicz Jr
When an interrupt is disabled and torn down, the CPU mask returned through affinity_hint right now is all CPUs. Also, for drivers that don't provide an affinity_hint mask, this can be misleading. There should be no hint at all, meaning an empty CPU mask. [ tglx: use zalloc_cpumask_var instead of clearing it under the lock ] Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Cc: davem@davemloft.net Cc: arjan@linux.jf.intel.com Cc: bhutchings@solarflare.com LKML-Reference: <20100505205638.5426.87189.stgit@ppwaskie-hc2.jf.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-05-03genirq: Add CPU mask affinity hintPeter P Waskiewicz Jr
This patch adds a cpumask affinity hint to the irq_desc structure, along with a registration function and a read-only proc entry for each interrupt. This affinity_hint handle for each interrupt can be used by underlying drivers that need a better mechanism to control interrupt affinity. The underlying driver can register a cpumask for the interrupt, which will allow the driver to provide the CPU mask for the interrupt to anything that requests it. The intent is to extend the userspace daemon, irqbalance, to help hint to it a preferred CPU mask to balance the interrupt into. [ tglx: Fixed compile warnings, added WARN_ON, made SMP only ] Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Cc: davem@davemloft.net Cc: arjan@linux.jf.intel.com Cc: bhutchings@solarflare.com LKML-Reference: <20100430214445.3992.41647.stgit@ppwaskie-hc2.jf.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-04-13Merge branch 'linus' into irq/coreThomas Gleixner
Reason: Get the upstream IRQF_DISABLED related changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>