| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc/whatever driver fixes. They
include:
- IIO driver fixes for some reported problems
- nvmem driver fixes
- fpga driver fixes
- debugfs memory leak fix in the hv_balloon and irqdomain code
(irqdomain change was acked by the maintainer)
All have been in linux-next with no reported problems"
* tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits)
kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup()
HV: hv_balloon: fix memory leak with using debugfs_lookup()
nvmem: qcom-spmi-sdam: fix module autoloading
nvmem: core: fix return value
nvmem: core: fix cell removal on error
nvmem: core: fix device node refcounting
nvmem: core: fix registration vs use race
nvmem: core: fix cleanup after dev_set_name()
nvmem: core: remove nvmem_config wp_gpio
nvmem: core: initialise nvmem->id early
nvmem: sunxi_sid: Always use 32-bit MMIO reads
nvmem: brcm_nvram: Add check for kzalloc
iio: imu: fxos8700: fix MAGN sensor scale and unit
iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN
iio: imu: fxos8700: fix failed initialization ODR mode assignment
iio: imu: fxos8700: fix incorrect ODR mode readback
iio: light: cm32181: Fix PM support on system with 2 I2C resources
iio: hid: fix the retval in gyro_3d_capture_sample
iio: hid: fix the retval in accel_3d_capture_sample
iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m
...
|
|
All RISC-V platforms have a single HW IPI provided by the INTC local
interrupt controller. The HW method to trigger INTC IPI can be through
external irqchip (e.g. RISC-V AIA), through platform specific device
(e.g. SiFive CLINT timer), or through firmware (e.g. SBI IPI call).
To support multiple IPIs on RISC-V, add a generic IPI multiplexing
mechanism which help us create multiple virtual IPIs using a single
HW IPI. This generic IPI multiplexing is inspired by the Apple AIC
irqchip driver and it is shared by various RISC-V irqchip drivers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Hector Martin <marcan@marcan.st>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230103141221.772261-4-apatel@ventanamicro.com
|
|
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable <stable@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230202151554.2310273-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
msi_create_device_irq_domain() creates a firmware node for the new domain,
which is never freed. kmemleak reports:
unreferenced object 0xffff888120ba9a00 (size 96):
comm "systemd-modules", pid 221, jiffies 4294893411 (age 635.732s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 e0 19 8b 83 ff ff ff ff ................
00 00 00 00 00 00 00 00 18 9a ba 20 81 88 ff ff ........... ....
backtrace:
[<000000008cdbc98d>] __irq_domain_alloc_fwnode+0x51/0x2b0
[<00000000c57acf9d>] msi_create_device_irq_domain+0x283/0x670
[<000000009b567982>] __pci_enable_msix_range+0x49e/0xdb0
[<0000000077cc1445>] pci_alloc_irq_vectors_affinity+0x11f/0x1c0
[<00000000532e9ef5>] mlx5_irq_table_create+0x24c/0x940 [mlx5_core]
[<00000000fabd2b80>] mlx5_load+0x1fa/0x680 [mlx5_core]
[<000000006bb22ae4>] mlx5_init_one+0x485/0x670 [mlx5_core]
[<00000000eaa5e1ad>] probe_one+0x4c2/0x720 [mlx5_core]
[<00000000df8efb43>] local_pci_probe+0xd6/0x170
[<0000000085cb9924>] pci_device_probe+0x231/0x6e0
Use the proper free operation for the firmware wnode so the name is freed
during error unwind of msi_create_device_irq_domain() and also free the
node in msi_remove_device_irq_domain() if it was automatically allocated.
To avoid extra NULL pointer checks make irq_domain_free_fwnode() tolerant
of NULL.
Fixes: 27a6dea3ebaa ("genirq/msi: Provide msi_create/free_device_irq_domain()")
Reported-by: Omri Barazi <obarazi@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kalle Valo <kvalo@kernel.org>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/0-v2-24af6665e2da+c9-msi_leak_jgg@nvidia.com
|
|
group_cpus_evenly() has become a generic function which can be used for
other subsystems than the interrupt subsystem, so move it into lib/.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20221227022905.352674-6-ming.lei@redhat.com
|
|
Map irq vector into group, which allows to abstract the algorithm for
a generic use case outside of the interrupt core.
Rename irq_build_affinity_masks as group_cpus_evenly, so the API can be
reused for blk-mq to make default queue mapping even though irq vectors
aren't involved.
No functional change, just rename vector as group.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20221227022905.352674-5-ming.lei@redhat.com
|
|
Prepare for abstracting irq_build_affinity_masks() into a public function
for assigning all CPUs evenly into several groups.
Don't pass irq_affinity_desc array to irq_build_affinity_masks, instead
return a cpumask array by storing each assigned group into one element of
the array.
This allows to provide a generic interface for grouping all CPUs evenly
from a NUMA and CPU locality viewpoint, and the cost is one extra allocation
in irq_build_affinity_masks(), which should be fine since it is done via
GFP_KERNEL and irq_build_affinity_masks() is a slow path anyway.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20221227022905.352674-4-ming.lei@redhat.com
|
|
Pass affinity managed mask array to irq_build_affinity_masks() so that the
index of the first affinity managed vector is always zero.
This allows to simplify the implementation a bit.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20221227022905.352674-3-ming.lei@redhat.com
|
|
The 'firstvec' parameter is always same with the parameter of
'startvec', so use 'startvec' directly inside irq_build_affinity_masks().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20221227022905.352674-2-ming.lei@redhat.com
|
|
s390 doesn't use irq_domains, so it has no place to set
IRQ_DOMAIN_FLAG_ISOLATED_MSI. Instead of continuing to abuse the iommu
subsystem to convey this information add a simple define which s390 can
make statically true. The define will cause msi_device_has_isolated() to
return true.
Remove IOMMU_CAP_INTR_REMAP from the s390 iommu driver.
Link: https://lore.kernel.org/r/8-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
What x86 calls "interrupt remapping" is one way to achieve isolated MSI,
make it clear this is talking about isolated MSI, no matter how it is
achieved. This matches the new driver facing API name of
msi_device_has_isolated_msi()
No functional change.
Link: https://lore.kernel.org/r/6-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
After converting the users of irq_domain_check_msi_remap() it and the
helpers are no longer needed.
The new version does not require all the #ifdef helpers and inlines
because CONFIG_GENERIC_MSI_IRQ always requires CONFIG_IRQ_DOMAIN and
IRQ_DOMAIN_HIERARCHY.
Link: https://lore.kernel.org/r/5-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This will replace irq_domain_check_msi_remap() in following patches.
The new API makes it more clear what "msi_remap" actually means from a
functional perspective instead of identifying an implementation specific
HW feature.
Isolated MSI means that HW modeled by an irq_domain on the path from the
initiating device to the CPU will validate that the MSI message specifies
an interrupt number that the device is authorized to trigger. This must
block devices from triggering interrupts they are not authorized to
trigger. Currently authorization means the MSI vector is one assigned to
the device.
This is interesting for securing VFIO use cases where a rouge MSI (eg
created by abusing a normal PCI MemWr DMA) must not allow the VFIO
userspace to impact outside its security domain, eg userspace triggering
interrupts on kernel drivers, a VM triggering interrupts on the
hypervisor, or a VM triggering interrupts on another VM.
As this is actually modeled as a per-irq_domain property, not a global
platform property, correct the interface to accept the device parameter
and scan through only the part of the irq_domains hierarchy originating
from the source device.
Locate the new code in msi.c as it naturally only works with
CONFIG_GENERIC_MSI_IRQ, which also requires CONFIG_IRQ_DOMAIN and
IRQ_DOMAIN_HIERARCHY.
Link: https://lore.kernel.org/r/1-v3-3313bb5dd3a3+10f11-secure_msi_jgg@nvidia.com
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
With the introduction of threaded interrupt handlers, it is virtually
never safe to call disable_irq() from non-premptible context.
Thus: Update the documentation, add an explicit might_sleep() to catch any
offenders. This is more obvious and straight forward than the implicit
might_sleep() check deeper down in the disable_irq() call chain.
Fixes: 3aa551c9b4c4 ("genirq: add threaded interrupt handler support")
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221216150441.200533-3-manfred@colorfullife.com
|
|
domain is present
On architectures such as s390 that do not use irq domains for MSI,
returning 0 as the maximum MSI index is a bit counter-productive,
as it indicates that no MSI can be allocated. Bad idea.
Instead, return the maximum we're willing to support in the MSI
backing store (MSI_XA_DOMAIN_SIZE), and let the arch code do its
usual thing.
Thanks to Matthew Rosato for fixing the fix.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[maz: commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/87fsdgzpqs.ffs@tglx
|
|
For architectures such as s390 and powerpc that do not use
irq domains for MSIs, dev->msi.domain is always NULL, so
the per-device, per-bus MSI domain is also guaranteed to
be NULL.
So checking one without checking the other is bound to result
in a splat, followed by a memory leak as we don't free the MSI
descriptors.
Add the missing check.
Reported-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/e570e70d-19bc-101b-0481-ff9a3cab3504@linux.ibm.com
|
|
For supporting post MSI-X enable allocations and for the upcoming PCI/IMS
support a separate interface is required which allows not only the
allocation of a specific index, but also the allocation of any, i.e. the
next free index. The latter is especially required for IMS because IMS
completely does away with index to functionality mappings which are
often found in MSI/MSI-X implementation.
But even with MSI-X there are devices where only the first few indices have
a fixed functionality and the rest is freely assignable by software,
e.g. to queues.
msi_domain_alloc_irq_at() is also different from the range based interfaces
as it always enforces that the MSI descriptor is allocated by the core code
and not preallocated by the caller like the PCI/MSI[-X] enable code path
does.
msi_domain_alloc_irq_at() can be invoked with the index argument set to
MSI_ANY_INDEX which makes the core code pick the next free index. The irq
domain can provide a prepare_desc() operation callback in it's
msi_domain_ops to do domain specific post allocation initialization before
the actual Linux interrupt and the associated interrupt descriptor and
hierarchy alloccations are conducted.
The function also takes an optional @icookie argument which is of type
union msi_instance_cookie. This cookie is not used by the core code and is
stored in the allocated msi_desc::data::icookie. The meaning of the cookie
is completely implementation defined. In case of IMS this might be a PASID
or a pointer to a device queue, but for the MSI core it's opaque and not
used in any way.
The function returns a struct msi_map which on success contains the
allocated index number and the Linux interrupt number so the caller can
spare the index to Linux interrupt number lookup.
On failure map::index contains the error code and map::virq is 0.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.501359457@linutronix.de
|
|
The existing MSI domain ops msi_prepare() and set_desc() turned out to be
unsuitable for implementing IMS support.
msi_prepare() does not operate on the MSI descriptors. set_desc() lacks
an irq_domain pointer and has a completely different purpose.
Introduce a prepare_desc() op which allows IMS implementations to amend an
MSI descriptor which was allocated by the core code, e.g. by adjusting the
iomem base or adding some data based on the allocated index. This is way
better than requiring that all IMS domain implementations preallocate the
MSI descriptor and then allocate the interrupt.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.444560717@linutronix.de
|
|
Provide new bus tokens for the upcoming per device PCI/MSI and PCI/MSIX
interrupt domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.917219885@linutronix.de
|
|
Per device domains provide the real domain size to the core code. This
allows range checking on insertion of MSI descriptors and also paves the
way for dynamic index allocations which are required e.g. for IMS. This
avoids external mechanisms like bitmaps on the device side and just
utilizes the core internal MSI descriptor storxe for it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.798556374@linutronix.de
|
|
Provide an interface to match a per device domain bus token. This allows to
query which type of domain is installed for a particular domain id. Will be
used for PCI to avoid frequent create/remove cycles for the MSI resp. MSI-X
domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.738047902@linutronix.de
|
|
Now that all prerequsites are in place, provide the actual interfaces for
creating and removing per device interrupt domains.
MSI device interrupt domains are created from the provided
msi_domain_template which is duplicated so that it can be modified for the
particular device.
The name of the domain and the name of the interrupt chip are composed by
"$(PREFIX)$(CHIPNAME)-$(DEVNAME)"
$PREFIX: The optional prefix provided by the underlying MSI parent domain
via msi_parent_ops::prefix.
$CHIPNAME: The name of the irq_chip in the template
$DEVNAME: The name of the device
The domain is further initialized through a MSI parent domain callback which
fills in the required functionality for the parent domain or domains further
down the hierarchy. This initialization can fail, e.g. when the requested
feature or MSI domain type cannot be supported.
The domain pointer is stored in the pointer array inside of msi_device_data
which is attached to the domain.
The domain can be removed via the API or left for disposal via devres when
the device is torn down. The API removal is useful e.g. for PCI to have
seperate domains for MSI and MSI-X, which are mutually exclusive and always
occupy the default domain id slot.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.678838546@linutronix.de
|
|
Split the functionality of msi_create_irq_domain() so it can
be reused for creating per device irq domains.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.559086358@linutronix.de
|
|
To allow proper range checking especially for dynamic allocations add a
size field to struct msi_domain_info. If the field is 0 then the size is
unknown or unlimited (up to MSI_MAX_INDEX) to provide backwards
compability.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.501144862@linutronix.de
|
|
MSI parent domains must have some control over the MSI domains which are
built on top. On domain creation they need to fill in e.g. architecture
specific chip callbacks or msi domain ops to make the outermost domain
parent agnostic which is obviously required for architecture independence
etc.
The structure contains:
1) A bitfield which exposes the supported functional features. This
allows to check for features and is also used in the initialization
callback to mask out unsupported features when the actual domain
implementation requests a broader range, e.g. on x86 PCI multi-MSI
is only supported by remapping domains but not by the underlying
vector domain. The PCI/MSI code can then always request multi-MSI
support, but the resulting feature set after creation might not
have it set.
2) An optional string prefix which is put in front of domain and chip
names during creation of the MSI domain. That allows to keep the
naming schemes e.g. on x86 where PCI-MSI domains have a IR- prefix
when interrupt remapping is enabled.
3) An initialization callback to sanity check the domain info of
the to be created MSI domain, to restrict features and to
apply changes in MSI ops and interrupt chip callbacks to
accomodate to the particular MSI parent implementation and/or
the underlying hierarchy.
Add a conveniance function to delegate the initialization from the
MSI parent domain to an underlying domain in the hierarchy.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232325.382485843@linutronix.de
|
|
Now that all users are converted remove the old interfaces.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.694291814@linutronix.de
|
|
Provide two sorts of interfaces to handle the different use cases:
- msi_domain_alloc_irqs_range():
Handles a caller defined precise range
- msi_domain_alloc_irqs_all():
Allocates all interrupts associated to a domain by scanning the
allocated MSI descriptors
The latter is useful for the existing PCI/MSI support which does not have
range information available.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.396497163@linutronix.de
|
|
Provide two sorts of interfaces to handle the different use cases:
- msi_domain_free_irqs_range():
Handles a caller defined precise range
- msi_domain_free_irqs_all():
Frees all interrupts associated to a domain
The latter is useful for device teardown and to handle the legacy MSI support
which does not have any range information available.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.337844751@linutronix.de
|
|
Allocating simple interrupt descriptors in the core code has to be multi
device irqdomain aware for the upcoming PCI/IMS support.
Change the interfaces to take a domain id into account. Use the internal
control struct for transport of arguments.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.279112474@linutronix.de
|
|
Change the descriptor free functions to take a domain id to prepare for the
upcoming multi MSI domain per device support.
To avoid changing and extending the interfaces over and over use an core
internal control struct and hand the pointer through the various functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.220788011@linutronix.de
|
|
Change the descriptor allocation and insertion functions to take a domain
id to prepare for the upcoming multi MSI domain per device support.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.163043028@linutronix.de
|
|
This reflects the functionality better. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.103554618@linutronix.de
|
|
In preparation of the upcoming per device multi MSI domain support, change
the interface to support lookups based on domain id and zero based index
within the domain.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230314.044613697@linutronix.de
|
|
To support multiple MSI interrupt domains per device it is necessary to
segment the xarray MSI descriptor storage. Each domain gets up to
MSI_MAX_INDEX entries.
Change the iterators so they operate with domain ids and take the domain
offsets into account.
The publicly available iterators which are mostly used in legacy
implementations and the PCI/MSI core default to MSI_DEFAULT_DOMAIN (0)
which is the id for the existing "global" domains.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.985498981@linutronix.de
|
|
With the upcoming per device MSI interrupt domain support it is necessary
to store the domain pointers per device.
Instead of delegating that storage to device drivers or subsystems add a
domain pointer to the msi_dev_domain array in struct msi_device_data.
This pointer is also used to take care of tearing down the irq domains when
msi_device_data is cleaned up via devres.
The interfaces into the MSI core will be changed from irqdomain pointer
based interfaces to domain id based interfaces to support multiple MSI
domains on a single device (e.g. PCI/MSI[-X] and PCI/IMS.
Once the per device domain support is complete the irq domain pointer in
struct device::msi.domain will not longer contain a pointer to the "global"
MSI domain. It will contain a pointer to the MSI parent domain instead.
It would be a horrible maze of conditionals to evaluate all over the place
which domain pointer should be used, i.e. the "global" one in
device::msi::domain or one from the internal pointer array.
To avoid this evaluate in msi_setup_device_data() whether the irq domain
which is associated to a device is a "global" or a parent MSI domain. If it
is global then copy the pointer into the first entry of the msi_dev_domain
array.
This allows to convert interfaces and implementation to domain ids while
keeping everything existing working.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.923860399@linutronix.de
|
|
The upcoming support for multiple MSI domains per device requires storage
for the MSI descriptors and in a second step storage for the irqdomain
pointers.
Move the xarray into a separate data structure msi_dev_domain and create an
array with size 1 in msi_device_data, which can be expanded later when the
support for per device domains is implemented.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.864887773@linutronix.de
|
|
In the upcoming per device MSI domain concept the MSI parent domains are
not allowed to be used as regular MSI domains where the MSI allocation/free
operations are applicable.
Add appropriate checks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.806128070@linutronix.de
|
|
irq_domain::dev is a misnomer as it's usually the rule that a device
pointer points to something which is directly related to the instance.
irq_domain::dev can point to some other device for power management to
ensure that this underlying device is not powered down when an interrupt is
allocated.
The upcoming per device MSI domains really require a pointer to the device
which instantiated the irq domain and not to some random other device which
is required for power management down the chain.
Rename irq_domain::dev to irq_domain::pm_dev and fixup the few sites which
use that pointer.
Conversion was done with the help of coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.574541683@linutronix.de
|
|
It's truly a MSI only flag and for the upcoming per device MSI domains this
must be in the MSI flags so it can be set during domain setup without
exposing this quirk outside of x86.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.454246167@linutronix.de
|
|
Fault injection tests trigger warnings like this:
kernfs: can not remove 'chip_name', no directory
WARNING: CPU: 0 PID: 253 at fs/kernfs/dir.c:1616 kernfs_remove_by_name_ns+0xce/0xe0
RIP: 0010:kernfs_remove_by_name_ns+0xce/0xe0
Call Trace:
<TASK>
remove_files.isra.1+0x3f/0xb0
sysfs_remove_group+0x68/0xe0
sysfs_remove_groups+0x41/0x70
__kobject_del+0x45/0xc0
kobject_del+0x29/0x40
free_desc+0x42/0x70
irq_free_descs+0x5e/0x90
The reason is that the interrupt descriptor sysfs handling does not roll
back on a failing kobject_add() during allocation. If the descriptor is
freed later on, kobject_del() is invoked with a not added kobject resulting
in the above warnings.
A proper rollback in case of a kobject_add() failure would be the straight
forward solution. But this is not possible due to the way how interrupt
descriptor sysfs handling works.
Interrupt descriptors are allocated before sysfs becomes available. So the
sysfs files for the early allocated descriptors are added later in the boot
process. At this point there can be nothing useful done about a failing
kobject_add(). For consistency the interrupt descriptor allocation always
treats kobject_add() failures as non-critical and just emits a warning.
To solve this problem, keep track in the interrupt descriptor whether
kobject_add() was successful or not and make the invocation of
kobject_del() conditional on that.
[ tglx: Massage changelog, comments and use a state bit. ]
Fixes: ecb3f394c5db ("genirq: Expose interrupt information through sysfs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221128151612.1786122-1-yangyingliang@huawei.com
|
|
No more users.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122015.807616900@linutronix.de
|
|
Adjust to reality and remove another layer of pointless Kconfig
indirection. CONFIG_GENERIC_MSI_IRQ is good enough to serve
all purposes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122014.524842979@linutronix.de
|
|
Add a bus token member to struct msi_domain_info and let
msi_create_irq_domain() set the bus token.
That allows to remove the bus token updates at the call sites.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122014.294554462@linutronix.de
|
|
Now that the last user is gone, confine it to the core code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122014.179595843@linutronix.de
|
|
To prepare for removing the exposure of __msi_domain_free_irqs() provide a
post_free() callback in the MSI domain ops which can be used to solve
the problem of the only user of __msi_domain_free_irqs() in arch/powerpc.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122014.063153448@linutronix.de
|
|
Nothing outside of the core code requires this.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122014.004725919@linutronix.de
|
|
W=1 complains about this.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122013.947071142@linutronix.de
|
|
When a range of descriptors is freed then all of them are not associated to
a linux interrupt. Remove the filter and add a warning to the free function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122013.888850936@linutronix.de
|
|
There are no associated MSI descriptors in the requested range when the MSI
descriptor allocation fails. Use MSI_DESC_ALL as the filter which prepares
the next step to get rid of the filter for freeing.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122013.831151822@linutronix.de
|
|
The force parameter in irq_set_affinity_deactivated() is not used,
get rid of it.
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221007103236.599-1-angus.chen@jaguarmicro.com
|
