| Age | Commit message (Collapse) | Author |
|---|
|
Architectures which don't define their own use the one in
asm-generic/bitops/lock.h. Get rid of all the ifdefs around "maybe we
don't have it".
Link: https://lkml.kernel.org/r/20231004165317.1061855-15-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace clear_bit_and_unlock_is_negative_byte() with
xor_unlock_is_negative_byte(). We have a few places that like to lock a
folio, set a flag and unlock it again. Allow for the possibility of
combining the latter two operations for efficiency. We are guaranteed
that the caller holds the lock, so it is safe to unlock it with the xor.
The caller must guarantee that nobody else will set the flag without
holding the lock; it is not safe to do this with the PG_dirty flag, for
example.
Link: https://lkml.kernel.org/r/20231004165317.1061855-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The console tracepoint is used by kcsan/kasan/kfence/kmsan test modules.
Since this tracepoint is not exported, these modules iterate over all
available tracepoints to find the console trace point. Export the trace
point so that it can be directly used.
Link: https://lkml.kernel.org/r/20230413100859.1492323-1-quic_pkondeti@quicinc.com
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Marco Elver <elver@google.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Size of the 'expect' array in the __report_matches is 1536 bytes, which
is exactly the default frame size warning limit of the xtensa
architecture.
As a result allmodconfig xtensa kernel builds with the gcc that does not
support the compiler plugins (which otherwise would push the said
warning limit to 2K) fail with the following message:
kernel/kcsan/kcsan_test.c:257:1: error: the frame size of 1680 bytes
is larger than 1536 bytes
Fix it by dynamically allocating the 'expect' array.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests and framework:
- introduce _NULL and _NOT_NULL macros to pointer error checks
- rework kunit_resource allocation policy to fix memory leaks when
caller doesn't specify free() function to be used when allocating
memory using kunit_add_resource() and kunit_alloc_resource() funcs.
- add ability to specify suite-level init and exit functions"
* tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (41 commits)
kunit: tool: Use qemu-system-i386 for i386 runs
kunit: fix executor OOM error handling logic on non-UML
kunit: tool: update riscv QEMU config with new serial dependency
kcsan: test: use new suite_{init,exit} support
kunit: tool: Add list of all valid test configs on UML
kunit: take `kunit_assert` as `const`
kunit: tool: misc cleanups
kunit: tool: minor cosmetic cleanups in kunit_parser.py
kunit: tool: make parser stop overwriting status of suites w/ no_tests
kunit: tool: remove dead parse_crash_in_log() logic
kunit: tool: print clearer error message when there's no TAP output
kunit: tool: stop using a shell to run kernel under QEMU
kunit: tool: update test counts summary line format
kunit: bail out of test filtering logic quicker if OOM
lib/Kconfig.debug: change KUnit tests to default to KUNIT_ALL_TESTS
kunit: Rework kunit_resource allocation policy
kunit: fix debugfs code to use enum kunit_status, not bool
kfence: test: use new suite_{init/exit} support, add .kunitconfig
kunit: add ability to specify suite-level init and exit functions
kunit: rename print_subtest_{start,end} for clarity (s/subtest/suite)
...
|
|
Use the newly added suite_{init,exit} support for suite-wide init and
cleanup. This avoids the unsupported method by which the test used to do
suite-wide init and cleanup (avoiding issues such as missing TAP
headers, and possible future conflicts).
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Per PREEMPT_DYNAMIC, checking CONFIG_PREEMPT doesn't tell you the actual
preemption model of the live kernel. Use the newly-introduced accessors
instead.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20211112185203.280040-4-valentin.schneider@arm.com
|
|
Some architectures do not define clear_bit_unlock_is_negative_byte().
Only test it when it is actually defined (similar to other usage, such
as in lib/test_kasan.c).
Link: https://lkml.kernel.org/r/202112050757.x67rHnFU-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The barrier tests in selftest and the kcsan_test module only need the
spinlock and mutex to test correct barrier instrumentation. Therefore,
these were initially placed on the stack.
However, lockdep asserts that locks are in static storage, and will
generate this warning:
| INFO: trying to register non-static key.
| The code is fine but needs lockdep annotation, or maybe
| you didn't initialize this object before use?
| turning off the locking correctness validator.
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.16.0-rc1+ #3208
| Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
| Call Trace:
| <TASK>
| dump_stack_lvl+0x88/0xd8
| dump_stack+0x15/0x1b
| register_lock_class+0x6b3/0x840
| ...
| test_barrier+0x490/0x14c7
| kcsan_selftest+0x47/0xa0
| ...
To fix, move the test locks into static storage.
Fixing the above also revealed that lock operations are strengthened on
first use with lockdep enabled, due to lockdep calling out into
non-instrumented files (recall that kernel/locking/lockdep.c is not
instrumented with KCSAN).
Only kcsan_test checks for over-instrumentation of *_lock() operations,
where we can simply "warm up" the test locks to avoid the test case
failing with lockdep.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Adds test cases to check that memory barriers are instrumented
correctly, and detection of missing memory barriers is working as
intended if CONFIG_KCSAN_STRICT=y.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Due to reordering accesses with weak memory modeling, any access can now
appear as "(reordered)".
Match any permutation of accesses if CONFIG_KCSAN_WEAK_MEMORY=y, so that
we effectively match an access if it is denoted "(reordered)" or not.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The scoping of an access simply denotes the scope in which it may be
reordered. However, in reports, it'll be less confusing to say the
access is "reordered". This is more accurate when the race occurred.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Support generating the string representation of scoped read-write
accesses for completeness. They will become required in planned changes.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If an explicit access address is set, as is done for scoped accesses,
always start the stack trace from that location. get_stack_skipnr() is
changed into sanitize_stack_entries(), which if given an address, scans
the stack trace for a matching function and then replaces that entry
with the explicitly provided address.
The previous reports for scoped accesses were all over the place, which
could be quite confusing. We now always point at the start of the scope.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY=n, then we may also see data
races between the writers only. If we get unlucky and never capture a
read-write data race, but only the write-write data races, then the
test_no_value_change* test cases may incorrectly fail.
The second problem is that the initial value needs to be reset, as
otherwise we might actually observe a value change at the start.
Fix it by also looking for the write-write data races, and resetting the
value to what will be written.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Use the new kunit_skip() to skip tests if requirements were not met.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When the test is built into the kernel (not a module), kcsan_test_init()
and kunit_init() both use late_initcall(), which means kcsan_test_init()
might see a NULL debugfs_rootdir as parent dentry, resulting in
kcsan_test_init() and kcsan_debugfs_init() both trying to create a
debugfs node named "kcsan" in debugfs root. One of them will show an
error and be unsuccessful.
Defer kcsan_test_init() until we're sure kunit was initialized.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Add rules to ignore data-racy reads with only 1-bit value changes.
Details about the rules are captured in comments in
kernel/kcsan/permissive.h. More background follows.
While investigating a number of data races, we've encountered data-racy
accesses on flags variables to be very common. The typical pattern is a
reader masking all but one bit, and/or the writer setting/clearing only
1 bit (current->flags being a frequently encountered case; more examples
in mm/sl[au]b.c, which disable KCSAN for this reason).
Since these types of data-racy accesses are common (with the assumption
they are intentional and hard to miscompile) having the option (with
CONFIG_KCSAN_PERMISSIVE=y) to filter them will avoid forcing everyone to
mark them, and deliberately left to preference at this time.
One important motivation for having this option built-in is to move
closer to being able to enable KCSAN on CI systems or for testers
wishing to test the whole kernel, while more easily filtering
less interesting data races with higher probability.
For the implementation, we considered several alternatives, but had one
major requirement: that the rules be kept together with the Linux-kernel
tree. Adding them to the compiler would preclude us from making changes
quickly; if the rules require tweaks, having them part of the compiler
requires waiting another ~1 year for the next release -- that's not
realistic. We are left with the following options:
1. Maintain compiler plugins as part of the kernel-tree that
removes instrumentation for some accesses (e.g. plain-& with
1-bit mask). The analysis would be reader-side focused, as
no assumption can be made about racing writers.
Because it seems unrealistic to maintain 2 plugins, one for LLVM and
GCC, we would likely pick LLVM. Furthermore, no kernel infrastructure
exists to maintain LLVM plugins, and the build-system implications and
maintenance overheads do not look great (historically, plugins written
against old LLVM APIs are not guaranteed to work with newer LLVM APIs).
2. Find a set of rules that can be expressed in terms of
observed value changes, and make it part of the KCSAN runtime.
The analysis is writer-side focused, given we rely on observed
value changes.
The approach taken here is (2). While a complete approach requires both
(1) and (2), experiments show that the majority of data races involving
trivial bit operations on flags variables can be removed with (2) alone.
It goes without saying that the filtering of data races using (1) or (2)
does _not_ guarantee they are safe! Therefore, limiting ourselves to (2)
for now is the conservative choice for setups that wish to enable
CONFIG_KCSAN_PERMISSIVE=y.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Printing a 'long' variable using the '%d' format string is wrong
and causes a warning from gcc:
kernel/kcsan/kcsan_test.c: In function 'nthreads_gen_params':
include/linux/kern_levels.h:5:25: error: format '%d' expects argument of type 'int', but argument 3 has type 'long int' [-Werror=format=]
Use the appropriate format modifier.
Fixes: f6a149140321 ("kcsan: Switch to KUNIT_CASE_PARAM for parameterized tests")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lkml.kernel.org/r/20210421135059.3371701-1-arnd@kernel.org
|
|
Since KUnit now support parameterized tests via KUNIT_CASE_PARAM, update
KCSAN's test to switch to it for parameterized tests. This simplifies
parameterized tests and gets rid of the "parameters in case name"
workaround (hack).
At the same time, we can increase the maximum number of threads used,
because on systems with too few CPUs, KUnit allows us to now stop at the
maximum useful threads and not unnecessarily execute redundant test
cases with (the same) limited threads as had been the case before.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Per recently added KUnit style recommendations at
Documentation/dev-tools/kunit/style.rst, make the following changes to
the KCSAN test:
1. Rename 'kcsan-test.c' to 'kcsan_test.c'.
2. Rename suite name 'kcsan-test' to 'kcsan'.
3. Rename CONFIG_KCSAN_TEST to CONFIG_KCSAN_KUNIT_TEST and
default to KUNIT_ALL_TESTS.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
