summaryrefslogtreecommitdiff
path: root/kernel/locking
AgeCommit message (Collapse)Author
2018-06-24Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "A set of fixes and updates for the locking code: - Prevent lockdep from updating irq state within its own code and thereby confusing itself. - Buid fix for older GCCs which mistreat anonymous unions - Add a missing lockdep annotation in down_read_non_onwer() which causes up_read_non_owner() to emit a lockdep splat - Remove the custom alpha dec_and_lock() implementation which is incorrect in terms of ordering and use the generic one. The remaining two commits are not strictly fixes. They provide irqsave variants of atomic_dec_and_lock() and refcount_dec_and_lock(). These are required to merge the relevant updates and cleanups into different maintainer trees for 4.19, so routing them into mainline without actual users is the sanest approach. They should have been in -rc1, but last weekend I took the liberty to just avoid computers in order to regain some mental sanity" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/qspinlock: Fix build for anonymous union in older GCC compilers locking/lockdep: Do not record IRQ state within lockdep code locking/rwsem: Fix up_read_non_owner() warning with DEBUG_RWSEMS locking/refcounts: Implement refcount_dec_and_lock_irqsave() atomic: Add irqsave variant of atomic_dec_and_lock() alpha: Remove custom dec_and_lock() implementation
2018-06-21locking/lockdep: Do not record IRQ state within lockdep codeSteven Rostedt (VMware)
While debugging where things were going wrong with mapping enabling/disabling interrupts with the lockdep state and actual real enabling and disabling interrupts, I had to silent the IRQ disabling/enabling in debug_check_no_locks_freed() because it was always showing up as it was called before the splat was. Use raw_local_irq_save/restore() for not only debug_check_no_locks_freed() but for all internal lockdep functions, as they hide useful information about where interrupts were used incorrectly last. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/lkml/20180404140630.3f4f4c7a@gandalf.local.home Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-20locking/rwsem: Fix up_read_non_owner() warning with DEBUG_RWSEMSWaiman Long
It was found that the use of up_read_non_owner() in NFS was causing the following warning when DEBUG_RWSEMS was configured. DEBUG_LOCKS_WARN_ON(sem->owner != ((struct task_struct *)(1UL << 0))) Looking into the rwsem.c file, it was discovered that the corresponding down_read_non_owner() function was not setting the owner field properly. This is fixed now, and the warning should be gone. Fixes: 5149cbac4235 ("locking/rwsem: Add DEBUG_RWSEMS to look for lock/unlock mismatches") Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Gavin Schenk <g.schenk@eckelmann.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-nfs@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1527168398-4291-1-git-send-email-longman@redhat.com
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-04Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: - Lots of tidying up changes all across the map for Linux's formal memory/locking-model tooling, by Alan Stern, Akira Yokosawa, Andrea Parri, Paul E. McKenney and SeongJae Park. Notable changes beyond an overall update in the tooling itself is the tidying up of spin_is_locked() semantics, which spills over into the kernel proper as well. - qspinlock improvements: the locking algorithm now guarantees forward progress whereas the previous implementation in mainline could starve threads indefinitely in cmpxchg() loops. Also other related cleanups to the qspinlock code (Will Deacon) - misc smaller improvements, cleanups and fixes all across the locking subsystem * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits) locking/rwsem: Simplify the is-owner-spinnable checks tools/memory-model: Add reference for 'Simplifying ARM concurrency' tools/memory-model: Update ASPLOS information MAINTAINERS, tools/memory-model: Update e-mail address for Andrea Parri tools/memory-model: Fix coding style in 'lock.cat' tools/memory-model: Remove out-of-date comments and code from lock.cat tools/memory-model: Improve mixed-access checking in lock.cat tools/memory-model: Improve comments in lock.cat tools/memory-model: Remove duplicated code from lock.cat tools/memory-model: Flag "cumulativity" and "propagation" tests tools/memory-model: Add model support for spin_is_locked() tools/memory-model: Add scripts to test memory model tools/memory-model: Fix coding style in 'linux-kernel.def' tools/memory-model: Model 'smp_store_mb()' tools/memory-order: Update the cheat-sheet to show that smp_mb__after_atomic() orders later RMW operations tools/memory-order: Improve key for SELF and SV tools/memory-model: Fix cheat sheet typo tools/memory-model: Update required version of herdtools7 tools/memory-model: Redefine rb in terms of rcu-fence tools/memory-model: Rename link and rcu-path to rcu-link and rb ...
2018-06-04Merge branch 'hch.procfs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull procfs updates from Al Viro: "Christoph's proc_create_... cleanups series" * 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits) xfs, proc: hide unused xfs procfs helpers isdn/gigaset: add back gigaset_procinfo assignment proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields tty: replace ->proc_fops with ->proc_show ide: replace ->proc_fops with ->proc_show ide: remove ide_driver_proc_write isdn: replace ->proc_fops with ->proc_show atm: switch to proc_create_seq_private atm: simplify procfs code bluetooth: switch to proc_create_seq_data netfilter/x_tables: switch to proc_create_seq_private netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data neigh: switch to proc_create_seq_data hostap: switch to proc_create_{seq,single}_data bonding: switch to proc_create_seq_data rtc/proc: switch to proc_create_single_data drbd: switch to proc_create_single resource: switch to proc_create_seq_data staging/rtl8192u: simplify procfs code jfs: simplify procfs code ...
2018-05-25locking/rwsem: Simplify the is-owner-spinnable checksOleg Nesterov
Add the trivial owner_on_cpu() helper for rwsem_can_spin_on_owner() and rwsem_spin_on_owner(), it also allows to make rwsem_can_spin_on_owner() a bit more clear. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Waiman Long <longman@redhat.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jan Kara <jack@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Theodore Y. Ts'o <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180518165534.GA22348@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-25Merge branch 'linus' into locking/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-16locking/percpu-rwsem: Annotate rwsem ownership transfer by setting ↵Waiman Long
RWSEM_OWNER_UNKNOWN The filesystem freezing code needs to transfer ownership of a rwsem embedded in a percpu-rwsem from the task that does the freezing to another one that does the thawing by calling percpu_rwsem_release() after freezing and percpu_rwsem_acquire() before thawing. However, the new rwsem debug code runs afoul with this scheme by warning that the task that releases the rwsem isn't the one that acquires it, as reported by Amir Goldstein: DEBUG_LOCKS_WARN_ON(sem->owner != get_current()) WARNING: CPU: 1 PID: 1401 at /home/amir/build/src/linux/kernel/locking/rwsem.c:133 up_write+0x59/0x79 Call Trace: percpu_up_write+0x1f/0x28 thaw_super_locked+0xdf/0x120 do_vfs_ioctl+0x270/0x5f1 ksys_ioctl+0x52/0x71 __x64_sys_ioctl+0x16/0x19 do_syscall_64+0x5d/0x167 entry_SYSCALL_64_after_hwframe+0x49/0xbe To work properly with the rwsem debug code, we need to annotate that the rwsem ownership is unknown during the tranfer period until a brave soul comes forward to acquire the ownership. During that period, optimistic spinning will be disabled. Reported-by: Amir Goldstein <amir73il@gmail.com> Tested-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jan Kara <jack@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Theodore Y. Ts'o <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-fsdevel@vger.kernel.org Link: http://lkml.kernel.org/r/1526420991-21213-3-git-send-email-longman@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-16locking/rwsem: Add a new RWSEM_ANONYMOUSLY_OWNED flagWaiman Long
There are use cases where a rwsem can be acquired by one task, but released by another task. In thess cases, optimistic spinning may need to be disabled. One example will be the filesystem freeze/thaw code where the task that freezes the filesystem will acquire a write lock on a rwsem and then un-owns it before returning to userspace. Later on, another task will come along, acquire the ownership, thaw the filesystem and release the rwsem. Bit 0 of the owner field was used to designate that it is a reader owned rwsem. It is now repurposed to mean that the owner of the rwsem is not known. If only bit 0 is set, the rwsem is reader owned. If bit 0 and other bits are set, it is writer owned with an unknown owner. One such value for the latter case is (-1L). So we can set owner to 1 for reader-owned, -1 for writer-owned. The owner is unknown in both cases. To handle transfer of rwsem ownership, the higher level code should set the owner field to -1 to indicate a write-locked rwsem with unknown owner. Optimistic spinning will be disabled in this case. Once the higher level code figures who the new owner is, it can then set the owner field accordingly. Tested-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jan Kara <jack@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Theodore Y. Ts'o <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-fsdevel@vger.kernel.org Link: http://lkml.kernel.org/r/1526420991-21213-2-git-send-email-longman@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-16proc: introduce proc_create_single{,_data}Christoph Hellwig
Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16proc: introduce proc_create_seq{,_data}Christoph Hellwig
Variants of proc_create{,_data} that directly take a struct seq_operations argument and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-14locking/lockdep: Move sanity check to inside lockdep_print_held_locks()Tetsuo Handa
Calling lockdep_print_held_locks() on a running thread is considered unsafe. Since all callers should follow that rule and the sanity check is not heavy, this patch moves the sanity check to inside lockdep_print_held_locks(). As a side effect of this patch, the number of locks held by running threads will be printed as well. This change will be preferable when we want to know which threads might be relevant to a problem but are unable to print any clues because that thread is running. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1523011279-8206-2-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-14locking/lockdep: Use for_each_process_thread() for debug_show_all_locks()Tetsuo Handa
debug_show_all_locks() tries to grab the tasklist_lock for two seconds, but calling while_each_thread() without tasklist_lock held is not safe. See the following commit for more information: 4449a51a7c281602 ("vm_is_stack: use for_each_thread() rather then buggy while_each_thread()") Change debug_show_all_locks() from "do_each_thread()/while_each_thread() with possibility of missing tasklist_lock" to "for_each_process_thread() with RCU", and add a call to touch_all_softlockup_watchdogs() like show_state_filter() does. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1523011279-8206-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-04locking/mutex: Optimize __mutex_trylock_fast()Peter Zijlstra
Use try_cmpxchg to avoid the pointless TEST instruction.. And add the (missing) atomic_long_try_cmpxchg*() wrappery. On x86_64 this gives: 0000000000000710 <mutex_lock>: 0000000000000710 <mutex_lock>: 710: 65 48 8b 14 25 00 00 mov %gs:0x0,%rdx 710: 65 48 8b 14 25 00 00 mov %gs:0x0,%rdx 717: 00 00 717: 00 00 715: R_X86_64_32S current_task 715: R_X86_64_32S current_task 719: 31 c0 xor %eax,%eax 719: 31 c0 xor %eax,%eax 71b: f0 48 0f b1 17 lock cmpxchg %rdx,(%rdi) 71b: f0 48 0f b1 17 lock cmpxchg %rdx,(%rdi) 720: 48 85 c0 test %rax,%rax 720: 75 02 jne 724 <mutex_lock+0x14> 723: 75 02 jne 727 <mutex_lock+0x17> 722: f3 c3 repz retq 725: f3 c3 repz retq 724: eb da jmp 700 <__mutex_lock_slowpath> 727: eb d7 jmp 700 <__mutex_lock_slowpath> 726: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1) 729: 0f 1f 80 00 00 00 00 nopl 0x0(%rax) 72d: 00 00 00 On ARM64 this gives: 000000000000638 <mutex_lock>: 0000000000000638 <mutex_lock>: 638: d5384101 mrs x1, sp_el0 638: d5384101 mrs x1, sp_el0 63c: d2800002 mov x2, #0x0 63c: d2800002 mov x2, #0x0 640: f9800011 prfm pstl1strm, [x0] 640: f9800011 prfm pstl1strm, [x0] 644: c85ffc03 ldaxr x3, [x0] 644: c85ffc03 ldaxr x3, [x0] 648: ca020064 eor x4, x3, x2 648: ca020064 eor x4, x3, x2 64c: b5000064 cbnz x4, 658 <mutex_lock+0x20> 64c: b5000064 cbnz x4, 658 <mutex_lock+0x20> 650: c8047c01 stxr w4, x1, [x0] 650: c8047c01 stxr w4, x1, [x0] 654: 35ffff84 cbnz w4, 644 <mutex_lock+0xc> 654: 35ffff84 cbnz w4, 644 <mutex_lock+0xc> 658: b40000c3 cbz x3, 670 <mutex_lock+0x38> 658: b5000043 cbnz x3, 660 <mutex_lock+0x28> 65c: a9bf7bfd stp x29, x30, [sp,#-16]! 65c: d65f03c0 ret 660: 910003fd mov x29, sp 660: a9bf7bfd stp x29, x30, [sp,#-16]! 664: 97ffffef bl 620 <__mutex_lock_slowpath> 664: 910003fd mov x29, sp 668: a8c17bfd ldp x29, x30, [sp],#16 668: 97ffffee bl 620 <__mutex_lock_slowpath> 66c: d65f03c0 ret 66c: a8c17bfd ldp x29, x30, [sp],#16 670: d65f03c0 ret 670: d65f03c0 ret Reported-by: Matthew Wilcox <mawilcox@microsoft.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27locking/qspinlock: Remove duplicate clear_pending() function from PV codeWill Deacon
The native clear_pending() function is identical to the PV version, so the latter can simply be removed. This fixes the build for systems with >= 16K CPUs using the PV lock implementation. Reported-by: Waiman Long <longman@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boqun.feng@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/20180427101619.GB21705@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27locking/qspinlock: Add stat tracking for pending vs. slowpathWaiman Long
Currently, the qspinlock_stat code tracks only statistical counts in the PV qspinlock code. However, it may also be useful to track the number of locking operations done via the pending code vs. the MCS lock queue slowpath for the non-PV case. The qspinlock stat code is modified to do that. The stat counter pv_lock_slowpath is renamed to lock_slowpath so that it can be used by both the PV and non-PV cases. Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Waiman Long <longman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boqun.feng@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1524738868-31318-14-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27locking/qspinlock: Use try_cmpxchg() instead of cmpxchg() when lockingWill Deacon
When reaching the head of an uncontended queue on the qspinlock slow-path, using a try_cmpxchg() instead of a cmpxchg() operation to transition the lock work to _Q_LOCKED_VAL generates slightly better code for x86 and pretty much identical code for arm64. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Waiman Long <longman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boqun.feng@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1524738868-31318-13-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27locking/qspinlock: Elide back-to-back RELEASE operations with smp_wmb()Will Deacon
The qspinlock slowpath must ensure that the MCS node is fully initialised before it can be reached by another other CPU. This is currently enforced by using a RELEASE operation when updating the tail and also when linking the node into the waitqueue, since the control dependency off xchg_tail is insufficient to enforce sufficient ordering, see: 95bcade33a8a ("locking/qspinlock: Ensure node is initialised before updating prev->next") Back-to-back RELEASE operations may be expensive on some architectures, particularly those that implement them using fences under the hood. We can replace the two RELEASE operations with a single smp_wmb() fence and use RELAXED operations for the subsequent publishing of the node. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Waiman Long <longman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boqun.feng@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1524738868-31318-12-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27locking/qspinlock: Use smp_cond_load_relaxed() to wait for next nodeWill Deacon
When a locker reaches the head of the queue and takes the lock, a concurrent locker may enqueue and force the lock holder to spin whilst its node->next field is initialised. Rather than open-code a READ_ONCE/cpu_relax() loop, this can be implemented using smp_cond_load_relaxed() instead. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Waiman Long <longman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boqun.feng@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1524738868-31318-10-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27locking/mcs: Use smp_cond_load_acquire() in MCS spin loopJason Low
For qspinlocks on ARM64, we would like to use WFE instead of purely spinning. Qspinlocks internally have lock contenders spin on an MCS lock. Update arch_mcs_spin_lock_contended() such that it uses the new smp_cond_load_acquire() so that ARM64 can also override this spin loop with its own implementation using WFE. On x86, this can also be cheaper than spinning on smp_load_acquire(). Signed-off-by: Jason Low <jason.low2@hp.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Waiman Long <longman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boqun.feng@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1524738868-31318-9-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27locking/qspinlock: Use atomic_cond_read_acquire()Will Deacon
Rather than dig into the counter field of the atomic_t inside the qspinlock structure so that we can call smp_cond_load_acquire(), use atomic_cond_read_acquire() instead, which operates on the atomic_t directly. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Waiman Long <longman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boqun.feng@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1524738868-31318-8-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27locking/qspinlock: Kill cmpxchg() loop when claiming lock from head of queueWill Deacon
When a queued locker reaches the head of the queue, it claims the lock by setting _Q_LOCKED_VAL in the lockword. If there isn't contention, it must also clear the tail as part of this operation so that subsequent lockers can avoid taking the slowpath altogether. Currently this is expressed as a cmpxchg() loop that practically only runs up to two iterations. This is confusing to the reader and unhelpful to the compiler. Rewrite the cmpxchg() loop without the loop, so that a failed cmpxchg() implies that there is contention and we just need to write to _Q_LOCKED_VAL without considering the rest of the lockword. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Waiman Long <longman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boqun.feng@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1524738868-31318-7-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27locking/qspinlock: Remove unbounded cmpxchg() loop from locking slowpathWill Deacon
The qspinlock locking slowpath utilises a "pending" bit as a simple form of an embedded test-and-set lock that can avoid the overhead of explicit queuing in cases where the lock is held but uncontended. This bit is managed using a cmpxchg() loop which tries to transition the uncontended lock word from (0,0,0) -> (0,0,1) or (0,0,1) -> (0,1,1). Unfortunately, the cmpxchg() loop is unbounded and lockers can be starved indefinitely if the lock word is seen to oscillate between unlocked (0,0,0) and locked (0,0,1). This could happen if concurrent lockers are able to take the lock in the cmpxchg() loop without queuing and pass it around amongst themselves. This patch fixes the problem by unconditionally setting _Q_PENDING_VAL using atomic_fetch_or, and then inspecting the old value to see whether we need to spin on the current lock owner, or whether we now effectively hold the lock. The tricky scenario is when concurrent lockers end up queuing on the lock and the lock becomes available, causing us to see a lockword of (n,0,0). With pending now set, simply queuing could lead to deadlock as the head of the queue may not have observed the pending flag being cleared. Conversely, if the head of the queue did observe pending being cleared, then it could transition the lock from (n,0,0) -> (0,0,1) meaning that any attempt to "undo" our setting of the pending bit could race with a concurrent locker trying to set it. We handle this race by preserving the pending bit when taking the lock after reaching the head of the queue and leaving the tail entry intact if we saw pending set, because we know that the tail is going to be updated shortly. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Waiman Long <longman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boqun.feng@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1524738868-31318-6-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27locking/qspinlock: Bound spinning on pending->locked transition in slowpathWill Deacon
If a locker taking the qspinlock slowpath reads a lock value indicating that only the pending bit is set, then it will spin whilst the concurrent pending->locked transition takes effect. Unfortunately, there is no guarantee that such a transition will ever be observed since concurrent lockers could continuously set pending and hand over the lock amongst themselves, leading to starvation. Whilst this would probably resolve in practice, it means that it is not possible to prove liveness properties about the lock and means that lock acquisition time is unbounded. Rather than removing the pending->locked spinning from the slowpath altogether (which has been shown to heavily penalise a 2-threaded locking stress test on x86), this patch replaces the explicit spinning with a call to atomic_cond_read_relaxed and allows the architecture to provide a bound on the number of spins. For architectures that can respond to changes in cacheline state in their smp_cond_load implementation, it should be sufficient to use the default bound of 1. Suggested-by: Waiman Long <longman@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Waiman Long <longman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boqun.feng@gmail.com Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1524738868-31318-4-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-27locking/qspinlock: Merge 'struct __qspinlock' into 'struct qspinlock'Will Deacon
'struct __qspinlock' provides a handy union of fields so that subcomponents of the lockword can be accessed by name, without having to manage shifts and masks explicitly and take endianness into account. This is useful in qspinlock.h and also potentially in arch headers, so move the 'struct __qspinlock' into 'struct qspinlock' and kill the extra definition. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Waiman Long <longman@redhat.com> Acked-by: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1524738868-31318-3-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-31locking/rwsem: Add DEBUG_RWSEMS to look for lock/unlock mismatchesWaiman Long
For a rwsem, locking can either be exclusive or shared. The corresponding exclusive or shared unlock must be used. Otherwise, the protected data structures may get corrupted or the lock may be in an inconsistent state. In order to detect such anomaly, a new configuration option DEBUG_RWSEMS is added which can be enabled to look for such mismatches and print warnings that that happens. Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1522445280-7767-2-git-send-email-longman@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-31Merge branch 'linus' into locking/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-29lockdep: Make the lock debug output more usefulTetsuo Handa
The lock debug output in print_lock() has a few shortcomings: - It prints the hlock->acquire_ip field in %px and %pS format. That's redundant information. - It lacks information about the lock object itself. The lock class is not helpful to identify a particular instance of a lock. Change the output so it prints: - hlock->instance to allow identification of a particular lock instance. - only the %pS format of hlock->ip_acquire which is sufficient to decode the actual code line with faddr2line. The resulting output is: 3 locks held by a.out/31106: #0: 00000000b0f753ba (&mm->mmap_sem){++++}, at: copy_process.part.41+0x10d5/0x1fe0 #1: 00000000ef64d539 (&mm->mmap_sem/1){+.+.}, at: copy_process.part.41+0x10fe/0x1fe0 #2: 00000000b41a282e (&mapping->i_mmap_rwsem){++++}, at: copy_process.part.41+0x12f2/0x1fe0 [ tglx: Massaged changelog ] Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: linux-mm@kvack.org Cc: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/201803271941.GBE57310.tVSOJLQOFFOHFM@I-love.SAKURA.ne.jp
2018-03-28locking/rtmutex: Handle non enqueued waiters gracefully in remove_waiter()Peter Zijlstra
In -RT task_blocks_on_rt_mutex() may return with -EAGAIN due to (->pi_blocked_on == PI_WAKEUP_INPROGRESS) before it added itself as a waiter. In such a case remove_waiter() must not be called because without a waiter it will trigger the BUG_ON() statement. This was initially reported by Yimin Deng. Thomas Gleixner fixed it then with an explicit check for waiters before calling remove_waiter(). Instead of an explicit NULL check before calling rt_mutex_top_waiter() make the function return NULL if there are no waiters. With that fixed the now pointless NULL check is removed from rt_mutex_slowlock(). Reported-and-debugged-by: Yimin Deng <yimin11.deng@gmail.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/CAAh1qt=DCL9aUXNxanP5BKtiPp3m+qj4yB+gDohhXPVFCxWwzg@mail.gmail.com Link: https://lkml.kernel.org/r/20180327121438.sss7hxg3crqy4ecd@linutronix.de
2018-03-20locking/mutex: Improve documentationMatthew Wilcox
On Wed, Mar 14, 2018 at 01:56:31PM -0700, Andrew Morton wrote: > My memory is weak and our documentation is awful. What does > mutex_lock_killable() actually do and how does it differ from > mutex_lock_interruptible()? Add kernel-doc for mutex_lock_killable() and mutex_lock_io(). Reword the kernel-doc for mutex_lock_interruptible(). Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: cl@linux.com Cc: tj@kernel.org Link: http://lkml.kernel.org/r/20180315115812.GA9949@bombadil.infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-12Merge tag 'v4.16-rc5' into locking/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-09rtmutex: Make rt_mutex_futex_unlock() safe for irq-off callsitesBoqun Feng
When running rcutorture with TREE03 config, CONFIG_PROVE_LOCKING=y, and kernel cmdline argument "rcutorture.gp_exp=1", lockdep reports a HARDIRQ-safe->HARDIRQ-unsafe deadlock: ================================ WARNING: inconsistent lock state 4.16.0-rc4+ #1 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. takes: __schedule+0xbe/0xaf0 {IN-HARDIRQ-W} state was registered at: _raw_spin_lock+0x2a/0x40 scheduler_tick+0x47/0xf0 ... other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&rq->lock); <Interrupt> lock(&rq->lock); *** DEADLOCK *** 1 lock held by rcu_torture_rea/724: rcu_torture_read_lock+0x0/0x70 stack backtrace: CPU: 2 PID: 724 Comm: rcu_torture_rea Not tainted 4.16.0-rc4+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: lock_acquire+0x90/0x200 ? __schedule+0xbe/0xaf0 _raw_spin_lock+0x2a/0x40 ? __schedule+0xbe/0xaf0 __schedule+0xbe/0xaf0 preempt_schedule_irq+0x2f/0x60 retint_kernel+0x1b/0x2d RIP: 0010:rcu_read_unlock_special+0x0/0x680 ? rcu_torture_read_unlock+0x60/0x60 __rcu_read_unlock+0x64/0x70 rcu_torture_read_unlock+0x17/0x60 rcu_torture_reader+0x275/0x450 ? rcutorture_booster_init+0x110/0x110 ? rcu_torture_stall+0x230/0x230 ? kthread+0x10e/0x130 kthread+0x10e/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ? call_usermodehelper_exec_async+0x11a/0x150 ret_from_fork+0x3a/0x50 This happens with the following even sequence: preempt_schedule_irq(); local_irq_enable(); __schedule(): local_irq_disable(); // irq off ... rcu_note_context_switch(): rcu_note_preempt_context_switch(): rcu_read_unlock_special(): local_irq_save(flags); ... raw_spin_unlock_irqrestore(...,flags); // irq remains off rt_mutex_futex_unlock(): raw_spin_lock_irq(); ... raw_spin_unlock_irq(); // accidentally set irq on <return to __schedule()> rq_lock(): raw_spin_lock(); // acquiring rq->lock with irq on which means rq->lock becomes a HARDIRQ-unsafe lock, which can cause deadlocks in scheduler code. This problem was introduced by commit 02a7c234e540 ("rcu: Suppress lockdep false-positive ->boost_mtx complaints"). That brought the user of rt_mutex_futex_unlock() with irq off. To fix this, replace the *lock_irq() in rt_mutex_futex_unlock() with *lock_irq{save,restore}() to make it safe to call rt_mutex_futex_unlock() with irq off. Fixes: 02a7c234e540 ("rcu: Suppress lockdep false-positive ->boost_mtx complaints") Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Link: https://lkml.kernel.org/r/20180309065630.8283-1-boqun.feng@gmail.com
2018-02-28locking/lockdep: Show unadorned pointersBorislav Petkov
Show unadorned pointers in lockdep reports - lockdep is a debugging facility and hashing pointers there doesn't make a whole lotta sense. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20180226134926.23069-1-bp@alien8.de
2018-02-13locking/qspinlock: Ensure node->count is updated before initialising nodeWill Deacon
When queuing on the qspinlock, the count field for the current CPU's head node is incremented. This needn't be atomic because locking in e.g. IRQ context is balanced and so an IRQ will return with node->count as it found it. However, the compiler could in theory reorder the initialisation of node[idx] before the increment of the head node->count, causing an IRQ to overwrite the initialised node and potentially corrupt the lock state. Avoid the potential for this harmful compiler reordering by placing a barrier() between the increment of the head node->count and the subsequent node initialisation. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1518528177-19169-3-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-13locking/qspinlock: Ensure node is initialised before updating prev->nextWill Deacon
When a locker ends up queuing on the qspinlock locking slowpath, we initialise the relevant mcs node and publish it indirectly by updating the tail portion of the lock word using xchg_tail. If we find that there was a pre-existing locker in the queue, we subsequently update their ->next field to point at our node so that we are notified when it's our turn to take the lock. This can be roughly illustrated as follows: /* Initialise the fields in node and encode a pointer to node in tail */ tail = initialise_node(node); /* * Exchange tail into the lockword using an atomic read-modify-write * operation with release semantics */ old = xchg_tail(lock, tail); /* If there was a pre-existing waiter ... */ if (old & _Q_TAIL_MASK) { prev = decode_tail(old); smp_read_barrier_depends(); /* ... then update their ->next field to point to node. WRITE_ONCE(prev->next, node); } The conditional update of prev->next therefore relies on the address dependency from the result of xchg_tail ensuring order against the prior initialisation of node. However, since the release semantics of the xchg_tail operation apply only to the write portion of the RmW, then this ordering is not guaranteed and it is possible for the CPU to return old before the writes to node have been published, consequently allowing us to point prev->next to an uninitialised node. This patch fixes the problem by making the update of prev->next a RELEASE operation, which also removes the reliance on dependency ordering. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1518528177-19169-2-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-30Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes relate to making lock_is_held() et al (and external wrappers of them) work on const data types - this requires const propagation through the depths of lockdep. This removes a number of ugly type hacks the external helpers used" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Convert some users to const lockdep: Make lockdep checking constant lockdep: Assign lock keys on registration
2018-01-30Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main RCU changes in this cycle were: - Updates to use cond_resched() instead of cond_resched_rcu_qs() where feasible (currently everywhere except in kernel/rcu and in kernel/torture.c). Also a couple of fixes to avoid sending IPIs to offline CPUs. - Updates to simplify RCU's dyntick-idle handling. - Updates to remove almost all uses of smp_read_barrier_depends() and read_barrier_depends(). - Torture-test updates. - Miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) torture: Save a line in stutter_wait(): while -> for torture: Eliminate torture_runnable and perf_runnable torture: Make stutter less vulnerable to compilers and races locking/locktorture: Fix num reader/writer corner cases locking/locktorture: Fix rwsem reader_delay torture: Place all torture-test modules in one MAINTAINERS group rcutorture/kvm-build.sh: Skip build directory check rcutorture: Simplify functions.sh include path rcutorture: Simplify logging rcutorture/kvm-recheck-*: Improve result directory readability check rcutorture/kvm.sh: Support execution from any directory rcutorture/kvm.sh: Use consistent help text for --qemu-args rcutorture/kvm.sh: Remove unused variable, `alldone` rcutorture: Remove unused script, config2frag.sh rcutorture/configinit: Fix build directory error message rcutorture: Preempt RCU-preempt readers more vigorously torture: Reduce #ifdefs for preempt_schedule() rcu: Remove have_rcu_nocb_mask from tree_plugin.h rcu: Add comment giving debug strategy for double call_rcu() tracing, rcu: Hide trace event rcu_nocb_wake when not used ...
2018-01-24locking/lockdep: Avoid triggering hardlockup from debug_show_all_locks()Tejun Heo
debug_show_all_locks() iterates all tasks and print held locks whole holding tasklist_lock. This can take a while on a slow console device and may end up triggering NMI hardlockup detector if someone else ends up waiting for tasklist_lock. Touch the NMI watchdog while printing the held locks to avoid spuriously triggering the hardlockup detector. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/20180122220055.GB1771050@devbig577.frc2.facebook.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-18lockdep: Make lockdep checking constantMatthew Wilcox
There are several places in the kernel which would like to pass a const pointer to lockdep_is_held(). Constify the entire path so nobody has to trick the compiler. Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Link: https://lkml.kernel.org/r/20180117151414.23686-3-willy@infradead.org
2018-01-18lockdep: Assign lock keys on registrationMatthew Wilcox
Lockdep is assigning lock keys when a lock was looked up. This is unnecessary; if the lock has never been registered then it is known that it is not locked. It also complicates the calling convention. Switch to assigning the lock key in register_lock_class(). Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Link: https://lkml.kernel.org/r/20180117151414.23686-2-willy@infradead.org
2018-01-14futex: Avoid violating the 10th rule of futexPeter Zijlstra
Julia reported futex state corruption in the following scenario: waiter waker stealer (prio > waiter) futex(WAIT_REQUEUE_PI, uaddr, uaddr2, timeout=[N ms]) futex_wait_requeue_pi() futex_wait_queue_me() freezable_schedule() <scheduled out> futex(LOCK_PI, uaddr2) futex(CMP_REQUEUE_PI, uaddr, uaddr2, 1, 0) /* requeues waiter to uaddr2 */ futex(UNLOCK_PI, uaddr2) wake_futex_pi() cmp_futex_value_locked(uaddr2, waiter) wake_up_q() <woken by waker> <hrtimer_wakeup() fires, clears sleeper->task> futex(LOCK_PI, uaddr2) __rt_mutex_start_proxy_lock() try_to_take_rt_mutex() /* steals lock */ rt_mutex_set_owner(lock, stealer) <preempted> <scheduled in> rt_mutex_wait_proxy_lock() __rt_mutex_slowlock() try_to_take_rt_mutex() /* fails, lock held by stealer */ if (timeout && !timeout->task) return -ETIMEDOUT; fixup_owner() /* lock wasn't acquired, so, fixup_pi_state_owner skipped */ return -ETIMEDOUT; /* At this point, we've returned -ETIMEDOUT to userspace, but the * futex word shows waiter to be the owner, and the pi_mutex has * stealer as the owner */ futex_lock(LOCK_PI, uaddr2) -> bails with EDEADLK, futex word says we're owner. And suggested that what commit: 73d786bd043e ("futex: Rework inconsistent rt_mutex/futex_q state") removes from fixup_owner() looks to be just what is needed. And indeed it is -- I completely missed that requeue_pi could also result in this case. So we need to restore that, except that subsequent patches, like commit: 16ffa12d7425 ("futex: Pull rt_mutex_futex_unlock() out from under hb->lock") changed all the locking rules. Even without that, the sequence: - if (rt_mutex_futex_trylock(&q->pi_state->pi_mutex)) { - locked = 1; - goto out; - } - raw_spin_lock_irq(&q->pi_state->pi_mutex.wait_lock); - owner = rt_mutex_owner(&q->pi_state->pi_mutex); - if (!owner) - owner = rt_mutex_next_owner(&q->pi_state->pi_mutex); - raw_spin_unlock_irq(&q->pi_state->pi_mutex.wait_lock); - ret = fixup_pi_state_owner(uaddr, q, owner); already suggests there were races; otherwise we'd never have to look at next_owner. So instead of doing 3 consecutive wait_lock sections with who knows what races, we do it all in a single section. Additionally, the usage of pi_state->owner in fixup_owner() was only safe because only the rt_mutex owner would modify it, which this additional case wrecks. Luckily the values can only change away and not to the value we're testing, this means we can do a speculative test and double check once we have the wait_lock. Fixes: 73d786bd043e ("futex: Rework inconsistent rt_mutex/futex_q state") Reported-by: Julia Cartwright <julia@ni.com> Reported-by: Gratian Crisan <gratian.crisan@ni.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Julia Cartwright <julia@ni.com> Tested-by: Gratian Crisan <gratian.crisan@ni.com> Cc: Darren Hart <dvhart@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20171208124939.7livp7no2ov65rrc@hirez.programming.kicks-ass.net
2018-01-03Merge branch 'for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Updates to use cond_resched() instead of cond_resched_rcu_qs() where feasible (currently everywhere except in kernel/rcu and in kernel/torture.c). Also a couple of fixes to avoid sending IPIs to offline CPUs. - Updates to simplify RCU's dyntick-idle handling. - Updates to remove almost all uses of smp_read_barrier_depends() and read_barrier_depends(). - Miscellaneous fixes. - Torture-test updates. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-12locking/lockdep: Remove the cross-release locking checksIngo Molnar
This code (CONFIG_LOCKDEP_CROSSRELEASE=y and CONFIG_LOCKDEP_COMPLETIONS=y), while it found a number of old bugs initially, was also causing too many false positives that caused people to disable lockdep - which is arguably a worse overall outcome. If we disable cross-release by default but keep the code upstream then in practice the most likely outcome is that we'll allow the situation to degrade gradually, by allowing entropy to introduce more and more false positives, until it overwhelms maintenance capacity. Another bad side effect was that people were trying to work around the false positives by uglifying/complicating unrelated code. There's a marked difference between annotating locking operations and uglifying good code just due to bad lock debugging code ... This gradual decrease in quality happened to a number of debugging facilities in the kernel, and lockdep is pretty complex already, so we cannot risk this outcome. Either cross-release checking can be done right with no false positives, or it should not be included in the upstream kernel. ( Note that it might make sense to maintain it out of tree and go through the false positives every now and then and see whether new bugs were introduced. ) Cc: Byungchul Park <byungchul.park@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-12locking/core: Remove break_lock field when CONFIG_GENERIC_LOCKBREAK=yWill Deacon
When CONFIG_GENERIC_LOCKBEAK=y, locking structures grow an extra int ->break_lock field which is used to implement raw_spin_is_contended() by setting the field to 1 when waiting on a lock and clearing it to zero when holding a lock. However, there are a few problems with this approach: - There is a write-write race between a CPU successfully taking the lock (and subsequently writing break_lock = 0) and a waiter waiting on the lock (and subsequently writing break_lock = 1). This could result in a contended lock being reported as uncontended and vice-versa. - On machines with store buffers, nothing guarantees that the writes to break_lock are visible to other CPUs at any particular time. - READ_ONCE/WRITE_ONCE are not used, so the field is potentially susceptible to harmful compiler optimisations, Consequently, the usefulness of this field is unclear and we'd be better off removing it and allowing architectures to implement raw_spin_is_contended() by providing a definition of arch_spin_is_contended(), as they can when CONFIG_GENERIC_LOCKBREAK=n. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1511894539-7988-3-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-12locking/core: Fix deadlock during boot on systems with GENERIC_LOCKBREAKWill Deacon
Commit: a8a217c22116 ("locking/core: Remove {read,spin,write}_can_lock()") removed the definition of raw_spin_can_lock(), causing the GENERIC_LOCKBREAK spin_lock() routines to poll the ->break_lock field when waiting on a lock. This has been reported to cause a deadlock during boot on s390, because the ->break_lock field is also set by the waiters, and can potentially remain set indefinitely if no other CPUs come in to take the lock after it has been released. This patch removes the explicit spinning on ->break_lock from the waiters, instead relying on the outer trylock() operation to determine when the lock is available. Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Tested-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: a8a217c22116 ("locking/core: Remove {read,spin,write}_can_lock()") Link: http://lkml.kernel.org/r/1511894539-7988-2-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-11Merge branches 'cond_resched.2017.12.04a', 'dyntick.2017.11.28a', ↵Paul E. McKenney
'fixes.2017.12.11a', 'srbd.2017.12.05a' and 'torture.2017.12.11a' into HEAD cond_resched.2017.12.04a: Convert cond_resched_rcu_qs() to cond_resched() dyntick.2017.11.28a: Make RCU dynticks handle interrupts from NMI fixes.2017.12.11a: Miscellaneous fixes srbd.2017.12.05a: Remove now-redundant smp_read_barrier_depends() torture.2017.12.11a: Torture-testing update
2017-12-11torture: Eliminate torture_runnable and perf_runnablePaul E. McKenney
The purpose of torture_runnable is to allow rcutorture and locktorture to be started and stopped via sysfs when they are built into the kernel (as in not compiled as loadable modules). However, the 0444 permissions for both instances of torture_runnable prevent this use case from ever being put into practice. Given that there have been no complaints about this deficiency, it is reasonable to conclude that no one actually makes use of this sysfs capability. The perf_runnable module parameter for rcuperf is in the same situation. This commit therefore removes both torture_runnable instances as well as perf_runnable. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11locking/locktorture: Fix num reader/writer corner casesDavidlohr Bueso
Things can explode for locktorture if the user does combinations of nwriters_stress=0 nreaders_stress=0. Fix this by not assuming we always want to torture writer threads. Reported-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Jeremy Linton <jeremy.linton@arm.com>