summaryrefslogtreecommitdiff
path: root/kernel/power
AgeCommit message (Collapse)Author
2013-05-02Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for 3.10. Wierd bits: - OMAP drm changes required OMAP dss changes, in drivers/video, so I took them in here. - one more fbcon fix for font handover - VT switch avoidance in pm code - scatterlist helpers for gpu drivers - have acks from akpm Highlights: - qxl kms driver - driver for the spice qxl virtual GPU Nouveau: - fermi/kepler VRAM compression - GK110/nvf0 modesetting support. Tegra: - host1x core merged with 2D engine support i915: - vt switchless resume - more valleyview support - vblank fixes - modesetting pipe config rework radeon: - UVD engine support - SI chip tiling support - GPU registers initialisation from golden values. exynos: - device tree changes - fimc block support Otherwise: - bunches of fixes all over the place." * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (513 commits) qxl: update to new idr interfaces. drm/nouveau: fix build with nv50->nvc0 drm/radeon: fix handling of v6 power tables drm/radeon: clarify family checks in pm table parsing drm/radeon: consolidate UVD clock programming drm/radeon: fix UPLL_REF_DIV_MASK definition radeon: add bo tracking debugfs drm/radeon: add new richland pci ids drm/radeon: add some new SI PCI ids drm/radeon: fix scratch reg handling for UVD fence drm/radeon: allocate SA bo in the requested domain drm/radeon: fix possible segfault when parsing pm tables drm/radeon: fix endian bugs in atom_allocate_fb_scratch() OMAPDSS: TFP410: return EPROBE_DEFER if the i2c adapter not found OMAPDSS: VENC: Add error handling for venc_probe_pdata OMAPDSS: HDMI: Add error handling for hdmi_probe_pdata OMAPDSS: RFBI: Add error handling for rfbi_probe_pdata OMAPDSS: DSI: Add error handling for dsi_probe_pdata OMAPDSS: SDI: Add error handling for sdi_probe_pdata OMAPDSS: DPI: Add error handling for dpi_probe_pdata ...
2013-04-30Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge third batch of fixes from Andrew Morton: "Most of the rest. I still have two large patchsets against AIO and IPC, but they're a bit stuck behind other trees and I'm about to vanish for six days. - random fixlets - inotify - more of the MM queue - show_stack() cleanups - DMI update - kthread/workqueue things - compat cleanups - epoll udpates - binfmt updates - nilfs2 - hfs - hfsplus - ptrace - kmod - coredump - kexec - rbtree - pids - pidns - pps - semaphore tweaks - some w1 patches - relay updates - core Kconfig changes - sysrq tweaks" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits) Documentation/sysrq: fix inconstistent help message of sysrq key ethernet/emac/sysrq: fix inconstistent help message of sysrq key sparc/sysrq: fix inconstistent help message of sysrq key powerpc/xmon/sysrq: fix inconstistent help message of sysrq key ARM/etm/sysrq: fix inconstistent help message of sysrq key power/sysrq: fix inconstistent help message of sysrq key kgdb/sysrq: fix inconstistent help message of sysrq key lib/decompress.c: fix initconst notifier-error-inject: fix module names in Kconfig kernel/sys.c: make prctl(PR_SET_MM) generally available UAPI: remove empty Kbuild files menuconfig: print more info for symbol without prompts init/Kconfig: re-order CONFIG_EXPERT options to fix menuconfig display kconfig menu: move Virtualization drivers near other virtualization options Kconfig: consolidate CONFIG_DEBUG_STRICT_USER_COPY_CHECKS relay: use macro PAGE_ALIGN instead of FIX_SIZE kernel/relay.c: move FIX_SIZE macro into relay.c kernel/relay.c: remove unused function argument actor drivers/w1/slaves/w1_ds2760.c: fix the error handling in w1_ds2760_add_slave() drivers/w1/slaves/w1_ds2781.c: fix the error handling in w1_ds2781_add_slave() ...
2013-04-30power/sysrq: fix inconstistent help message of sysrq keyzhangwei(Jovi)
Currently help message of /proc/sysrq-trigger highlight its upper-case characters, like below: SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) ... this would confuse user trigger sysrq by upper-case character, which is inconsistent with the real lower-case character registed key. This inconsistent help message will also lead more confused when 26 upper-case letters put into use in future. This patch fix power off sysrq key: "poweroff(o)" Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-05PM / sleep: invalidate TEST_CPUS and TEST_CORE support for freeze stateZhang Rui
freeze state is a software suspend state that does not run into low-level platform callbacks which may interact with BIOS. And freeze state does not need to disable the processors. But the current pm_test support misleads users because users can enter freeze state with pm_test set to TEST_CPUS/TEST_CORE, while this pm_test setting never takes actions. So, invalidate TEST_CPUS/TEST_CORE for freeze state in this patch. Then users will get an error instead, when trying to enter freeze state with pm_test mode set to TEST_CPUS/TEST_CORE. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-05PM / sleep: add TEST_PLATFORM support for freeze stateZhang Rui
Invoke freeze_enter() after suspend_test(TEST_PLATFORM) being invoked. So when setting /sys/power/pm_test to "platform", it can be used to check if freeze state is working well after all devices are suspended and before processors are blocked, Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-19Merge tag 'v3.9-rc3' into drm-intel-next-queuedDaniel Vetter
Backmerge so that I can merge Imre Deak's coalesced sg entries fixes, which depend upon the new for_each_sg_page introduce in commit a321e91b6d73ed011ffceed384c40d2785cf723b Author: Imre Deak <imre.deak@intel.com> Date: Wed Feb 27 17:02:56 2013 -0800 lib/scatterlist: add simple page iterator The merge itself is just two trivial conflicts: Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-20PM: make VT switching to the suspend console optional v3Jesse Barnes
KMS drivers can potentially restore the display configuration without userspace help. Such drivers can can call a new funciton, pm_vt_switch_required(false) if they support this feature. In that case, the PM layer won't VT switch to the suspend console at suspend time and then back to the original VT on resume, but rather leave things alone for a nicer looking suspend and resume sequence. v2: make a function so we can handle multiple drivers (Alan) v3: use a list to track device requests (Rafael) v4: Squash in build fix from Jesse for CONFIG_VT_CONSOLE_SLEEP=n v5: Squash in patch from Wu Fengguang to add a few missing static qualifiers. v6: Add missing EXPORT_SYMBOL. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> (v3) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-09suspend: enable freeze timeout configuration through sysLi Fei
At present, the value of timeout for freezing is 20s, which is meaningless in case that one thread is frozen with mutex locked and another thread is trying to lock the mutex, as this time of freezing will fail unavoidably. And if there is no new wakeup event registered, the system will waste at most 20s for such meaningless trying of freezing. With this patch, the value of timeout can be configured to smaller value, so such meaningless trying of freezing will be aborted in earlier time, and later freezing can be also triggered in earlier time. And more power will be saved. In normal case on mobile phone, it costs real little time to freeze processes. On some platform, it only costs about 20ms to freeze user space processes and 10ms to freeze kernel freezable threads. Signed-off-by: Liu Chuansheng <chuansheng.liu@intel.com> Signed-off-by: Li Fei <fei.li@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-09PM: Introduce suspend state PM_SUSPEND_FREEZEZhang Rui
PM_SUSPEND_FREEZE state is a general state that does not need any platform specific support, it equals frozen processes + suspended devices + idle processors. Compared with PM_SUSPEND_MEMORY, PM_SUSPEND_FREEZE saves less power because the system is still in a running state. PM_SUSPEND_FREEZE has less resume latency because it does not touch BIOS, and the processors are in idle state. Compared with RTPM/idle, PM_SUSPEND_FREEZE saves more power as 1. the processor has longer sleep time because processes are frozen. The deeper c-state the processor supports, more power saving we can get. 2. PM_SUSPEND_FREEZE uses system suspend code path, thus we can get more power saving from the devices that does not have good RTPM support. This state is useful for 1) platforms that do not have STR, or have a broken STR. 2) platforms that have an extremely low power idle state, which can be used to replace STR. The following describes how PM_SUSPEND_FREEZE state works. 1. echo freeze > /sys/power/state 2. the processes are frozen. 3. all the devices are suspended. 4. all the processors are blocked by a wait queue 5. all the processors idles and enters (Deep) c-state. 6. an interrupt fires. 7. a processor is woken up and handles the irq. 8. if it is a general event, a) the irq handler runs and quites. b) goto step 4. 9. if it is a real wake event, say, power button pressing, keyboard touch, mouse moving, a) the irq handler runs and activate the wakeup source b) wakeup_source_activate() notifies the wait queue. c) system starts resuming from PM_SUSPEND_FREEZE 10. all the devices are resumed. 11. all the processes are unfrozen. 12. system is back to working. Known Issue: The wakeup of this new PM_SUSPEND_FREEZE state may behave differently from the previous suspend state. Take ACPI platform for example, there are some GPEs that only enabled when the system is in sleep state, to wake the system backk from S3/S4. But we are not touching these GPEs during transition to PM_SUSPEND_FREEZE. This means we may lose some wake event. But on the other hand, as we do not disable all the Interrupts during PM_SUSPEND_FREEZE, we may get some extra "wakeup" Interrupts, that are not available for S3/S4. The patches has been tested on an old Sony laptop, and here are the results: Average Power: 1. RPTM/idle for half an hour: 14.8W, 12.6W, 14.1W, 12.5W, 14.4W, 13.2W, 12.9W 2. Freeze for half an hour: 11W, 10.4W, 9.4W, 11.3W 10.5W 3. RTPM/idle for three hours: 11.6W 4. Freeze for three hours: 10W 5. Suspend to Memory: 0.5~0.9W Average Resume Latency: 1. RTPM/idle with a black screen: (From pressing keyboard to screen back) Less than 0.2s 2. Freeze: (From pressing power button to screen back) 2.50s 3. Suspend to Memory: (From pressing power button to screen back) 4.33s >From the results, we can see that all the platforms should benefit from this patch, even if it does not have Low Power S0. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06driver-core: constify data for class_find_device()Michał Mirosław
All in-kernel users of class_find_device() don't really need mutable data for match callback. In two places (kernel/power/suspend_test.c, drivers/scsi/osd/osd_uld.c) this patch changes match callbacks to use const search data. The const is propagated to rtc_class_open() and power_supply_get_by_name() parameters. Note that there's a dev reference leak in suspend_test.c that's not touched in this patch. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-26PM: don't use [delayed_]work_pending()Tejun Heo
There's no need to test whether a (delayed) work item is pending before queueing, flushing or cancelling it, so remove work_pending() tests used in those cases. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-12-12Merge branch 'for-3.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup changes from Tejun Heo: "A lot of activities on cgroup side. The big changes are focused on making cgroup hierarchy handling saner. - cgroup_rmdir() had peculiar semantics - it allowed cgroup destruction to be vetoed by individual controllers and tried to drain refcnt synchronously. The vetoing never worked properly and caused good deal of contortions in cgroup. memcg was the last reamining user. Michal Hocko removed the usage and cgroup_rmdir() path has been simplified significantly. This was done in a separate branch so that the memcg people can base further memcg changes on top. - The above allowed cleaning up cgroup lifecycle management and implementation of generic cgroup iterators which are used to improve hierarchy support. - cgroup_freezer updated to allow migration in and out of a frozen cgroup and handle hierarchy. If a cgroup is frozen, all descendant cgroups are frozen. - netcls_cgroup and netprio_cgroup updated to handle hierarchy properly. - Various fixes and cleanups. - Two merge commits. One to pull in memcg and rmdir cleanups (needed to build iterators). The other pulled in cgroup/for-3.7-fixes for device_cgroup fixes so that further device_cgroup patches can be stacked on top." Fixed up a trivial conflict in mm/memcontrol.c as per Tejun (due to commit bea8c150a7 ("memcg: fix hotplugged memory zone oops") in master touching code close to commit 2ef37d3fe4 ("memcg: Simplify mem_cgroup_force_empty_list error handling") in for-3.8) * 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (65 commits) cgroup: update Documentation/cgroups/00-INDEX cgroup_rm_file: don't delete the uncreated files cgroup: remove subsystem files when remounting cgroup cgroup: use cgroup_addrm_files() in cgroup_clear_directory() cgroup: warn about broken hierarchies only after css_online cgroup: list_del_init() on removed events cgroup: fix lockdep warning for event_control cgroup: move list add after list head initilization netprio_cgroup: allow nesting and inherit config on cgroup creation netprio_cgroup: implement netprio[_set]_prio() helpers netprio_cgroup: use cgroup->id instead of cgroup_netprio_state->prioidx netprio_cgroup: reimplement priomap expansion netprio_cgroup: shorten variable names in extend_netdev_table() netprio_cgroup: simplify write_priomap() netcls_cgroup: move config inheritance to ->css_online() and remove .broken_hierarchy marking cgroup: remove obsolete guarantee from cgroup_task_migrate. cgroup: add cgroup->id cgroup, cpuset: remove cgroup_subsys->post_clone() cgroup: s/CGRP_CLONE_CHILDREN/CGRP_CPUSET_CLONE_CHILDREN/ cgroup: rename ->create/post_create/pre_destroy/destroy() to ->css_alloc/online/offline/free() ...
2012-11-29Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: PM / Freezer: Fixup compile error of try_to_freeze_nowarn() driver core / PM: move the calling to device_pm_remove behind the calling to bus_remove_device PM / Hibernate: use rb_entry PM / sysfs: replace strict_str* with kstrto*
2012-11-15PM / Hibernate: use rb_entryDavidlohr Bueso
Since the software suspend extents are organized in an rbtree, use rb_entry instead of container_of, as it is semantically more appropriate in order to get a node as it is iterated. Signed-off-by: Davidlohr Bueso <dave@gnu.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15PM / sysfs: replace strict_str* with kstrto*Daniel Walter
Replace strict_strtoul() with kstrtoul() in pm_async_store() and pm_qos_power_write(). [rjw: Modified subject and changelog.] Signed-off-by: Daniel Walter <sahne@0x90.at> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-10-26freezer: change ptrace_stop/do_signal_stop to use freezable_schedule()Oleg Nesterov
try_to_freeze_tasks() and cgroup_freezer rely on scheduler locks to ensure that a task doing STOPPED/TRACED -> RUNNING transition can't escape freezing. This mostly works, but ptrace_stop() does not necessarily call schedule(), it can change task->state back to RUNNING and check freezing() without any lock/barrier in between. We could add the necessary barrier, but this patch changes ptrace_stop() and do_signal_stop() to use freezable_schedule(). This fixes the race, freezer_count() and freezer_should_skip() carefully avoid the race. And this simplifies the code, try_to_freeze_tasks/update_if_frozen no longer need to use task_is_stopped_or_traced() checks with the non trivial assumptions. We can rely on the mechanism which was specially designed to mark the sleeping task as "frozen enough". v2: As Tejun pointed out, we can also change get_signal_to_deliver() and move try_to_freeze() up before 'relock' label. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2012-10-23PM / QoS: Introduce request and constraint data types for PM QoS flagsRafael J. Wysocki
Introduce struct pm_qos_flags_request and struct pm_qos_flags representing PM QoS flags request type and PM QoS flags constraint type, respectively. With these definitions the data structures will be arranged so that the list member of a struct pm_qos_flags object will contain the head of a list of struct pm_qos_flags_request objects representing all of the "flags" requests present for the given device. Then, the effective_flags member of a struct pm_qos_flags object will contain the bitwise OR of the flags members of all the struct pm_qos_flags_request objects in the list. Additionally, introduce helper function pm_qos_update_flags() allowing the caller to manage the list of struct pm_qos_flags_request pointed to by the list member of struct pm_qos_flags. The flags are of type s32 so that the request's "value" field is always of the same type regardless of what kind of request it is (latency requests already have value fields of type s32). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Acked-by: mark gross <markgross@thegnar.org>
2012-09-17Merge branch 'pm-qos'Rafael J. Wysocki
* pm-qos: PM / QoS: Add return code to pm_qos_get_value function.
2012-09-17Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: properly __init-annotate pm_sysrq_init() PM / wakeup: Use irqsave/irqrestore for events_lock PM / Freezer: Fix small typo "regrigerator" PM / Sleep: Print name of wakeup source that aborts suspend
2012-09-10properly __init-annotate pm_sysrq_init()Jan Beulich
This is used only as argument to subsys_initcall(). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-07PM / QoS: Add return code to pm_qos_get_value function.Luis Gonzalez Fernandez
pm_qos_get_value don't return a return code in all cases. It's sure that anything interesting happend after BUG() but this prevent any compilation warning. [rjw: Chaneged the new return value to PM_QOS_DEFAULT_VALUE.] Signed-off-by: Luis Gonzalez Fernandez <luisgf@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-04PM / Domains: Add power off/on function for system core suspend stageRafael J. Wysocki
Introduce function pm_genpd_syscore_switch() and two wrappers around it, pm_genpd_syscore_poweroff() and pm_genpd_syscore_poweron(), allowing the callers to let the generic PM domains framework know that the given device is not necessary any more and its PM domain can be turned off (the former) or that the given device will be required immediately, so its PM domain has to be turned on (the latter) during the system core (syscore) stage of system suspend (or hibernation) and resume. These functions will be used for handling devices registered as clock sources and clock event devices that belong to PM domains. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-08-23PM / Freezer: Fix small typo "regrigerator"Sedat Dilek
Noticed when digging into a suspend issue in linux-next (next-20120821). For more details see <http://marc.info/?t=134554708000002&r=1&w=2>. Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-08-08Revert "NMI watchdog: fix for lockup detector breakage on resume"Rafael J. Wysocki
Revert commit 45226e9 (NMI watchdog: fix for lockup detector breakage on resume) which breaks resume from system suspend on my SH7372 Mackerel board (by causing a NULL pointer dereference to happen) and is generally wrong, because it abuses the CPU hotplug functionality in a shamelessly blatant way. The original issue should be addressed through appropriate syscore resume callback instead. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-30NMI watchdog: fix for lockup detector breakage on resumeSameer Nanda
On the suspend/resume path the boot CPU does not go though an offline->online transition. This breaks the NMI detector post-resume since it depends on PMU state that is lost when the system gets suspended. Fix this by forcing a CPU offline->online transition for the lockup detector on the boot CPU during resume. To provide more context, we enable NMI watchdog on Chrome OS. We have seen several reports of systems freezing up completely which indicated that the NMI watchdog was not firing for some reason. Debugging further, we found a simple way of repro'ing system freezes -- issuing the command 'tasket 1 sh -c "echo nmilockup > /proc/breakme"' after the system has been suspended/resumed one or more times. With this patch in place, the system freeze result in panics, as expected. These panics provide a nice stack trace for us to debug the actual issue causing the freeze. [akpm@linux-foundation.org: fiddle with code comment] [akpm@linux-foundation.org: make lockup_detector_bootcpu_resume() conditional on CONFIG_SUSPEND] [akpm@linux-foundation.org: fix section errors] Signed-off-by: Sameer Nanda <snanda@chromium.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Don Zickus <dzickus@redhat.com> Cc: Mandeep Singh Baines <msb@chromium.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-22Merge tag 'pm-for-3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: - ACPI conversion to PM handling based on struct dev_pm_ops. - Conversion of a number of platform drivers to PM handling based on struct dev_pm_ops and removal of empty legacy PM callbacks from a couple of PCI drivers. - Suspend-to-both for in-kernel hibernation from Bojan Smojver. - cpuidle fixes and cleanups from ShuoX Liu, Daniel Lezcano and Preeti Murthy. - cpufreq bug fixes from Jonghwa Lee and Stephen Boyd. - Suspend and hibernate fixes from Srivatsa Bhat and Colin Cross. - Generic PM domains framework updates. - RTC CMOS wakeup signaling update from Paul Fox. - sparse warnings fixes from Sachin Kamat. - Build warnings fixes for the generic PM domains framework and PM sysfs code. - sysfs switch for printing device suspend times from Sameer Nanda. - Documentation fix from Oskar Schirmer. * tag 'pm-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (70 commits) cpufreq: Fix sysfs deadlock with concurrent hotplug/frequency switch EXYNOS: bugfix on retrieving old_index from freqs.old PM / Sleep: call early resume handlers when suspend_noirq fails PM / QoS: Use NULL pointer instead of plain integer in qos.c PM / QoS: Use NULL pointer instead of plain integer in pm_qos.h PM / Sleep: Require CAP_BLOCK_SUSPEND to use wake_lock/wake_unlock PM / Sleep: Add missing static storage class specifiers in main.c cpuilde / ACPI: remove time from acpi_processor_cx structure cpuidle / ACPI: remove usage from acpi_processor_cx structure cpuidle / ACPI : remove latency_ticks from acpi_processor_cx structure rtc-cmos: report wakeups from interrupt handler PM / Sleep: Fix build warning in sysfs.c for CONFIG_PM_SLEEP unset PM / Domains: Fix build warning for CONFIG_PM_RUNTIME unset olpc-xo15-sci: Use struct dev_pm_ops for power management PM / Domains: Replace plain integer with NULL pointer in domain.c file PM / Domains: Add missing static storage class specifier in domain.c file PM / crypto / ux500: Use struct dev_pm_ops for power management PM / IPMI: Remove empty legacy PCI PM callbacks tpm_nsc: Use struct dev_pm_ops for power management tpm_tis: Use struct dev_pm_ops for power management ...
2012-07-18Make wait_for_device_probe() also do scsi_complete_async_scans()Linus Torvalds
Commit a7a20d103994 ("sd: limit the scope of the async probe domain") make the SCSI device probing run device discovery in it's own async domain. However, as a result, the partition detection was no longer synchronized by async_synchronize_full() (which, despite the name, only synchronizes the global async space, not all of them). Which in turn meant that "wait_for_device_probe()" would not wait for the SCSI partitions to be parsed. And "wait_for_device_probe()" was what the boot time init code relied on for mounting the root filesystem. Now, most people never noticed this, because not only is it timing-dependent, but modern distributions all use initrd. So the root filesystem isn't actually on a disk at all. And then before they actually mount the final disk filesystem, they will have loaded the scsi-wait-scan module, which not only does the expected wait_for_device_probe(), but also does scsi_complete_async_scans(). [ Side note: scsi_complete_async_scans() had also been partially broken, but that was fixed in commit 43a8d39d0137 ("fix async probe regression"), so that same commit a7a20d103994 had actually broken setups even if you used scsi-wait-scan explicitly ] Solve this problem by just moving the scsi_complete_async_scans() call into wait_for_device_probe(). Everybody who wants to wait for device probing to finish really wants the SCSI probing to complete, so there's no reason not to do this. So now "wait_for_device_probe()" really does what the name implies, and properly waits for device probing to finish. This also removes the now unnecessary extra calls to scsi_complete_async_scans(). Reported-and-tested-by: Artem S. Tashkinov <t.artem@mailcity.com> Cc: Dan Williams <dan.j.williams@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <jbottomley@parallels.com> Cc: Borislav Petkov <bp@amd64.org> Cc: linux-scsi <linux-scsi@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-19PM / Sleep: Require CAP_BLOCK_SUSPEND to use wake_lock/wake_unlockRafael J. Wysocki
Require processes wanting to use the wake_lock/wake_unlock sysfs files to have the CAP_BLOCK_SUSPEND capability, which also is required for the eventpoll EPOLLWAKEUP flag to be effective, so that all interfaces related to blocking autosleep depend on the same capability. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@vger.kernel.org Acked-by: Michael Kerrisk <mtk.man-pages@gmail.com>
2012-07-01PM / Hibernate: Print hibernation/thaw progress indicator one line at a time.Bojan Smojver
With the introduction of suspend to both into in-kernel hibernation code, dmesg was getting polluted with backspace characters printed as part of image saving progress indicator. This patch introduces printing of progress indicator on image save/load every 10% and one line at a time. As an additional benefit, all other messages emitted by the kernel during hibernation/thaw should now print cleanly as well. Signed-off-by: Bojan Smojver <bojan@rexursive.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-01PM / Sleep: Separate printing suspend times from initcall_debugRafael J. Wysocki
Change the behavior of the newly introduced /sys/power/pm_print_times attribute so that its initial value depends on initcall_debug, but setting it to 0 will cause device suspend/resume times not to be printed, even if initcall_debug has been set. This way, the people who use initcall_debug for reasons other than PM debugging will be able to switch the suspend/resume times printing off, if need be. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-01PM / Sleep: add knob for printing device resume timesSameer Nanda
Added a new knob called /sys/power/pm_print_times. Setting it to 1 enables printing of time taken by devices to suspend and resume. Setting it to 0 disables this printing (unless overridden by initcall_debug kernel command line option). Signed-off-by: Sameer Nanda <snanda@chromium.org> Acked-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-01ftrace: Disable function tracing during suspend/resume and hibernation, againSrivatsa S. Bhat
If function tracing is enabled for some of the low-level suspend/resume functions, it leads to triple fault during resume from suspend, ultimately ending up in a reboot instead of a resume (or a total refusal to come out of suspended state, on some machines). This issue was explained in more detail in commit f42ac38c59e0a03d (ftrace: disable tracing for suspend to ram). However, the changes made by that commit got reverted by commit cbe2f5a6e84eebb (tracing: allow tracing of suspend/resume & hibernation code again). So, unfortunately since things are not yet robust enough to allow tracing of low-level suspend/resume functions, suspend/resume is still broken when ftrace is enabled. So fix this by disabling function tracing during suspend/resume & hibernation. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-01PM / Hibernate: Enable suspend to both for in-kernel hibernation.Bojan Smojver
It is often useful to suspend to memory after hibernation image has been written to disk. If the battery runs out or power is otherwise lost, the computer will resume from the hibernated image. If not, it will resume from memory and hibernation image will be discarded. Signed-off-by: Bojan Smojver <bojan@rexursive.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-18PM / Hibernate: Use get_gendisk to verify partition if resume_file is ↵Minho Ban
integer format Sometimes resume= parameter comes in integer style (e.g. major:minor) and then name_to_dev_t can not detect partition properly. (especially async device like usb, mmc). This patch calls get_gendisk() if resumewait is true and resume_file is in integer format to work around this problem. Signed-off-by: Minho Ban <mhban@samsung.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-11PM / Sleep: User space wakeup sources garbage collector Kconfig optionRafael J. Wysocki
Make it possible to configure out the user space wakeup sources garbage collector for debugging and default Android builds. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Arve Hjønnevåg <arve@android.com>
2012-05-11PM / Sleep: Make the limit of user space wakeup sources configurableRafael J. Wysocki
Make it possible to configure out the check against the limit of user space wakeup sources for debugging and default Android builds. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Arve Hjønnevåg <arve@android.com>
2012-05-05PM / Sleep: Fix a mistake in a conditional in autosleep_store()Arve Hjønnevåg
The condition check in autosleep_store() is incorrect and prevents /sys/power/autosleep from working as advertised. Fix that. [rjw: Added the changelog.] Signed-off-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-01PM / Sleep: Add user space interface for manipulating wakeup sources, v3Rafael J. Wysocki
Android allows user space to manipulate wakelocks using two sysfs file located in /sys/power/, wake_lock and wake_unlock. Writing a wakelock name and optionally a timeout to the wake_lock file causes the wakelock whose name was written to be acquired (it is created before is necessary), optionally with the given timeout. Writing the name of a wakelock to wake_unlock causes that wakelock to be released. Implement an analogous interface for user space using wakeup sources. Add the /sys/power/wake_lock and /sys/power/wake_unlock files allowing user space to create, activate and deactivate wakeup sources, such that writing a name and optionally a timeout to wake_lock causes the wakeup source of that name to be activated, optionally with the given timeout. If that wakeup source doesn't exist, it will be created and then activated. Writing a name to wake_unlock causes the wakeup source of that name, if there is one, to be deactivated. Wakeup sources created with the help of wake_lock that haven't been used for more than 5 minutes are garbage collected and destroyed. Moreover, there can be only WL_NUMBER_LIMIT wakeup sources created with the help of wake_lock present at a time. The data type used to track wakeup sources created by user space is called "struct wakelock" to indicate the origins of this feature. This version of the patch includes an rbtree manipulation fix from John Stultz. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NeilBrown <neilb@suse.de>
2012-05-01PM / Sleep: Add "prevent autosleep time" statistics to wakeup sourcesRafael J. Wysocki
Android uses one wakelock statistics that is only necessary for opportunistic sleep. Namely, the prevent_suspend_time field accumulates the total time the given wakelock has been locked while "automatic suspend" was enabled. Add an analogous field, prevent_sleep_time, to wakeup sources and make it behave in a similar way. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01PM / Sleep: Implement opportunistic sleep, v2Rafael J. Wysocki
Introduce a mechanism by which the kernel can trigger global transitions to a sleep state chosen by user space if there are no active wakeup sources. It consists of a new sysfs attribute, /sys/power/autosleep, that can be written one of the strings returned by reads from /sys/power/state, an ordered workqueue and a work item carrying out the "suspend" operations. If a string representing the system's sleep state is written to /sys/power/autosleep, the work item triggering transitions to that state is queued up and it requeues itself after every execution until user space writes "off" to /sys/power/autosleep. That work item enables the detection of wakeup events using the functions already defined in drivers/base/power/wakeup.c (with one small modification) and calls either pm_suspend(), or hibernate() to put the system into a sleep state. If a wakeup event is reported while the transition is in progress, it will abort the transition and the "system suspend" work item will be queued up again. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NeilBrown <neilb@suse.de>
2012-05-01PM / Hibernate: Hibernate/thaw fixes/improvementsBojan Smojver
1. Do not allocate memory for buffers from emergency pools, unless absolutely required. Do not warn about and do not retry non-essential failed allocations. 2. Do not check the amount of free pages left on every single page write, but wait until one map is completely populated and then check. 3. Set maximum number of pages for read buffering consistently, instead of inadvertently depending on the size of the sector type. 4. Fix copyright line, which I missed when I submitted the hibernation threading patch. 5. Dispense with bit shifting arithmetic to improve readability. 6. Really recalculate the number of pages required to be free after all allocations have been done. 7. Fix calculation of pages required for read buffering. Only count in pages that do not belong to high memory. Signed-off-by: Bojan Smojver <bojan@rexursive.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-04-24PM / Hibernate: fix the number of pages used for hibernate/thaw bufferingBojan Smojver
Hibernation regression fix, since 3.2. Calculate the number of required free pages based on non-high memory pages only, because that is where the buffers will come from. Commit 081a9d043c983f161b78fdc4671324d1342b86bc introduced a new buffer page allocation logic during hibernation, in order to improve the performance. The amount of pages allocated was calculated based on total amount of pages available, although only non-high memory pages are usable for this purpose. This caused hibernation code to attempt to over allocate pages on platforms that have high memory, which led to hangs. Signed-off-by: Bojan Smojver <bojan@rexursive.com> Signed-off-by: Rafael J. Wysocki <rjw@suse.de>
2012-03-28PM / QoS: add pm_qos_update_request_timeout() APIMyungJoo Ham
The new API, pm_qos_update_request_timeout() is to provide a timeout with pm_qos_update_request. For example, pm_qos_update_request_timeout(req, 100, 1000), means that QoS request on req with value 100 will be active for 1000 microseconds. After 1000 microseconds, the QoS request thru req is reset. If there were another pm_qos_update_request(req, x) during the 1000 us, this new request with value x will override as this is another request on the same req handle. A new request on the same req handle will always override the previous request whether it is the conventional request or it is the new timeout request. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Gross <markgross@thegnar.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-03-28PM / Sleep: Mitigate race between the freezer and request_firmware()Rafael J. Wysocki
There is a race condition between the freezer and request_firmware() such that if request_firmware() is run on one CPU and freeze_processes() is run on another CPU and usermodehelper_disable() called by it succeeds to grab umhelper_sem for writing before usermodehelper_read_trylock() called from request_firmware() acquires it for reading, the request_firmware() will fail and trigger a WARN_ON() complaining that it was called at a wrong time. However, in fact, it wasn't called at a wrong time and freeze_processes() simply happened to be executed simultaneously. To avoid this race, at least in some cases, modify usermodehelper_read_trylock() so that it doesn't fail if the freezing of tasks has just started and hasn't been completed yet. Instead, during the freezing of tasks, it will try to freeze the task that has called it so that it can wait until user space is thawed without triggering the scary warning. For this purpose, change usermodehelper_disabled so that it can take three different values, UMH_ENABLED (0), UMH_FREEZING and UMH_DISABLED. The first one means that usermode helpers are enabled, the last one means "hard disable" (i.e. the system is not ready for usermode helpers to be used) and the second one is reserved for the freezer. Namely, when freeze_processes() is started, it sets usermodehelper_disabled to UMH_FREEZING which tells usermodehelper_read_trylock() that it shouldn't fail just yet and should call try_to_freeze() if woken up and cannot return immediately. This way all freezable tasks that happen to call request_firmware() right before freeze_processes() is started and lose the race for umhelper_sem with it will be frozen and will sleep until thaw_processes() unsets usermodehelper_disabled. [For the non-freezable callers of request_firmware() the race for umhelper_sem against freeze_processes() is unfortunately unavoidable.] Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org
2012-03-28PM / Sleep: Move disabling of usermode helpers to the freezerRafael J. Wysocki
The core suspend/hibernation code calls usermodehelper_disable() to avoid race conditions between the freezer and the starting of usermode helpers and each code path has to do that on its own. However, it is always called right before freeze_processes() and usermodehelper_enable() is always called right after thaw_processes(). For this reason, to avoid code duplication and to make the connection between usermodehelper_disable() and the freezer more visible, make freeze_processes() call it and remove the direct usermodehelper_disable() and usermodehelper_enable() calls from all suspend/hibernation code paths. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org
2012-03-28PM / Hibernate: Disable usermode helpers right before freezing tasksRafael J. Wysocki
There is no reason to call usermodehelper_disable() before creating memory bitmaps in hibernate() and software_resume(), so call it right before freeze_processes(), in accordance with the other suspend and hibernation code. Consequently, call usermodehelper_enable() right after the thawing of tasks rather than after freeing the memory bitmaps. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org
2012-03-21Merge tag 'pm-for-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates for 3.4 from Rafael Wysocki: "Assorted extensions and fixes including: * Introduction of early/late suspend/hibernation device callbacks. * Generic PM domains extensions and fixes. * devfreq updates from Axel Lin and MyungJoo Ham. * Device PM QoS updates. * Fixes of concurrency problems with wakeup sources. * System suspend and hibernation fixes." * tag 'pm-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (43 commits) PM / Domains: Check domain status during hibernation restore of devices PM / devfreq: add relation of recommended frequency. PM / shmobile: Make MTU2 driver use pm_genpd_dev_always_on() PM / shmobile: Make CMT driver use pm_genpd_dev_always_on() PM / shmobile: Make TMU driver use pm_genpd_dev_always_on() PM / Domains: Introduce "always on" device flag PM / Domains: Fix hibernation restore of devices, v2 PM / Domains: Fix handling of wakeup devices during system resume sh_mmcif / PM: Use PM QoS latency constraint tmio_mmc / PM: Use PM QoS latency constraint PM / QoS: Make it possible to expose PM QoS latency constraints PM / Sleep: JBD and JBD2 missing set_freezable() PM / Domains: Fix include for PM_GENERIC_DOMAINS=n case PM / Freezer: Remove references to TIF_FREEZE in comments PM / Sleep: Add more wakeup source initialization routines PM / Hibernate: Enable usermodehelpers in hibernate() error path PM / Sleep: Make __pm_stay_awake() delete wakeup source timers PM / Sleep: Fix race conditions related to wakeup source timer function PM / Sleep: Fix possible infinite loop during wakeup source destruction PM / Hibernate: print physical addresses consistently with other parts of kernel ...
2012-03-20power: remove the second argument of k[un]map_atomic()Cong Wang
Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-04Merge branch 'pm-qos'Rafael J. Wysocki
* pm-qos: PM / QoS: unconditionally build the feature PM / QoS: Simplify PM QoS expansion/merge