summaryrefslogtreecommitdiff
path: root/kernel/printk
AgeCommit message (Collapse)Author
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-27Merge tag 'printk-for-4.21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Keep spinlocks busted until the end of panic() - Fix races between calculating number of messages that would fit into user space buffers, filling the buffers, and switching printk.time parameter - Some code clean up * tag 'printk-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: Remove print_prefix() calls with NULL buffer. printk: fix printk_time race. printk: Make printk_emit() local function. panic: avoid deadlocks in re-entrant console drivers
2018-12-12printk: Remove print_prefix() calls with NULL buffer.Tetsuo Handa
We can save lines/size by removing print_prefix() with buf == NULL. This patch makes no functional change. Link: http://lkml.kernel.org/r/1544521745-11925-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp To: Steven Rostedt <rostedt@goodmis.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-12-10printk: fix printk_time race.Tetsuo Handa
Since printk_time can be toggled via /sys/module/printk/parameters/time , it is not safe to assume that output length does not change across multiple msg_print_text() calls. If we hit this race, we can observe failures such as SYSLOG_ACTION_READ_ALL writes more bytes than userspace has supplied, SYSLOG_ACTION_SIZE_UNREAD returns -EFAULT when succeeded, SYSLOG_ACTION_READ reads garbage memory or even triggers an kernel oops at _copy_to_user() due to integer overflow. To close this race, get a snapshot value of printk_time and pass it to SYSLOG_ACTION_READ, SYSLOG_ACTION_READ_ALL, SYSLOG_ACTION_SIZE_UNREAD and kmsg_dump_get_buffer(). Link: http://lkml.kernel.org/r/555af37c-b9e0-f940-cb73-a78eba2d4944@i-love.sakura.ne.jp To: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-11-29printk: Make printk_emit() local function.Tetsuo Handa
printk_emit() is called from only devkmsg_write() in the same file. Save object size by making it a local function. Link: http://lkml.kernel.org/r/5cc99d2c-c408-34f7-d1fc-e1cd2a9e31da@i-love.sakura.ne.jp Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: remove _virt from APIs returning virtual addressMike Rapoport
The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-12printk: fix integer overflow in setup_log_buf()Sergey Senozhatsky
The way we calculate logbuf free space percentage overflows signed integer: int free; free = __LOG_BUF_LEN - log_next_idx; pr_info("early log buf free: %u(%u%%)\n", free, (free * 100) / __LOG_BUF_LEN); We support LOG_BUF_LEN of up to 1<<25 bytes. Since setup_log_buf() is called during early init, logbuf is mostly empty, so __LOG_BUF_LEN - log_next_idx is close to 1<<25. Thus when we multiply it by 100, we overflow signed integer value range: 100 is 2^6 + 2^5 + 2^2. Example, booting with LOG_BUF_LEN 1<<25 and log_buf_len=2G boot param: [ 0.075317] log_buf_len: -2147483648 bytes [ 0.075319] early log buf free: 33549896(-28%) Make "free" unsigned integer and use appropriate printk() specifier. Link: http://lkml.kernel.org/r/20181010113308.9337-1-sergey.senozhatsky@gmail.com To: Steven Rostedt <rostedt@goodmis.org> Cc: linux-kernel@vger.kernel.org Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-10-12printk: do not preliminary split up cont bufferSergey Senozhatsky
We have a proper 'overflow' check which tells us that we need to split up existing cont buffer in separate records: if (cont.len + len > sizeof(cont.buf)) cont_flush(); At the same time we also have one extra flush: "if cont buffer is 80% full then split it up" in cont_add(): if (cont.len > (sizeof(cont.buf) * 80) / 100) cont_flush(); This looks to be redundant, since the existing "overflow" check should work just fine, so remove this 80% check and wait for either a normal cont termination \n, for preliminary flush due to possible buffer overflow or for preliminary flush due to cont race. Link: http://lkml.kernel.org/r/20181002023836.4487-4-sergey.senozhatsky@gmail.com To: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: LKML <linux-kernel@vger.kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-10-12printk: lock/unlock console only for new logbuf entriesSergey Senozhatsky
Prior to commit 5c2992ee7fd8a29 ("printk: remove console flushing special cases for partial buffered lines") we would do console_cont_flush() for each pr_cont() to print cont fragments, so console_unlock() would actually print data: pr_cont(); console_lock(); console_unlock() console_cont_flush(); // print cont fragment ... pr_cont(); console_lock(); console_unlock() console_cont_flush(); // print cont fragment We don't do console_cont_flush() anymore, so when we do pr_cont() console_unlock() does nothing (unless we flushed the cont buffer): pr_cont(); console_lock(); console_unlock(); // noop ... pr_cont(); console_lock(); console_unlock(); // noop ... pr_cont(); cont_flush(); console_lock(); console_unlock(); // print data We also wakeup klogd purposelessly for pr_cont() output - un-flushed cont buffer is not stored in log_buf; there is nothing to pull. Thus we can console_lock()/console_unlock()/wake_up_klogd() only when we know that we log_store()-ed a message and there is something to print to the consoles/syslog. Link: http://lkml.kernel.org/r/20181002023836.4487-3-sergey.senozhatsky@gmail.com To: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: LKML <linux-kernel@vger.kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-10-12printk: keep kernel cont support always enabledSergey Senozhatsky
Since commit 5c2992ee7fd8a29 ("printk: remove console flushing special cases for partial buffered lines") we don't print cont fragments to the consoles; cont lines are now proper log_buf entries and there is no "consecutive continuation flag" anymore: we either have 'c' entries that mark continuation lines without fragments; or '-' entries that mark normal logbuf entries. There are no '+' entries anymore. However, we still have a small leftover - presence of ext_console drivers disables kernel cont support and we flush each pr_cont() and store it as a separate log_buf entry. Previously, it worked because msg_print_ext_header() had that "an optional external merge of the records" functionality: if (msg->flags & LOG_CONT) cont = (prev_flags & LOG_CONT) ? '+' : 'c'; We don't do this as of now, so keep kernel cont always enabled. Note from pmladek: The original purpose was to get full information including the metadata and dictionary via extended console drivers, see commit 6fe29354befe4c46e ("printk: implement support for extended console drivers"). The dictionary probably was the most important part but it was actually lost: static void cont_flush(void) { [...] log_store(cont.facility, cont.level, cont.flags, cont.ts_nsec, NULL, 0, cont.buf, cont.len); Nobody noticed because the only dictionary user is dev_printk() and dev_cont() is _not_ defined. Link: http://lkml.kernel.org/r/20181002023836.4487-2-sergey.senozhatsky@gmail.com To: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: LKML <linux-kernel@vger.kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> [pmladek@suse.com: Updated commit message] Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-10-09printk: Give error on attempt to set log buffer length to over 2GHe Zhe
The current printk() is ready to handle log buffer size up to 2G. Give an explicit error for users who want to use larger log buffer. Also fix printk formatting to show the 2G as a positive number. Link: http://lkml.kernel.org/r/20181008135916.gg4kkmoki5bgtco5@pathway.suse.cz Cc: rostedt@goodmis.org Cc: linux-kernel@vger.kernel.org Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> [pmladek: Fixed to the really safe limit 2GB.] Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-10-05printk: Add KBUILD_MODNAME and remove a redundant print prefixHe Zhe
Add KBUILD_MODNAME to make prints more clear. Link: http://lkml.kernel.org/r/1538239553-81805-3-git-send-email-zhe.he@windriver.com Cc: rostedt@goodmis.org Cc: linux-kernel@vger.kernel.org Signed-off-by: He Zhe <zhe.he@windriver.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-10-05printk: Correct wrong castingHe Zhe
log_first_seq and console_seq are 64-bit unsigned integers. Correct a wrong casting that might cut off the output. Link: http://lkml.kernel.org/r/1538239553-81805-2-git-send-email-zhe.he@windriver.com Cc: rostedt@goodmis.org Cc: linux-kernel@vger.kernel.org Signed-off-by: He Zhe <zhe.he@windriver.com> [sergey.senozhatsky@gmail.com: More descriptive commit message] Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-10-05printk: Fix panic caused by passing log_buf_len to command lineHe Zhe
log_buf_len_setup does not check input argument before passing it to simple_strtoull. The argument would be a NULL pointer if "log_buf_len", without its value, is set in command line and thus causes the following panic. PANIC: early exception 0xe3 IP 10:ffffffffaaeacd0d error 0 cr2 0x0 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc4-yocto-standard+ #1 [ 0.000000] RIP: 0010:_parse_integer_fixup_radix+0xd/0x70 ... [ 0.000000] Call Trace: [ 0.000000] simple_strtoull+0x29/0x70 [ 0.000000] memparse+0x26/0x90 [ 0.000000] log_buf_len_setup+0x17/0x22 [ 0.000000] do_early_param+0x57/0x8e [ 0.000000] parse_args+0x208/0x320 [ 0.000000] ? rdinit_setup+0x30/0x30 [ 0.000000] parse_early_options+0x29/0x2d [ 0.000000] ? rdinit_setup+0x30/0x30 [ 0.000000] parse_early_param+0x36/0x4d [ 0.000000] setup_arch+0x336/0x99e [ 0.000000] start_kernel+0x6f/0x4ee [ 0.000000] x86_64_start_reservations+0x24/0x26 [ 0.000000] x86_64_start_kernel+0x6f/0x72 [ 0.000000] secondary_startup_64+0xa4/0xb0 This patch adds a check to prevent the panic. Link: http://lkml.kernel.org/r/1538239553-81805-1-git-send-email-zhe.he@windriver.com Cc: stable@vger.kernel.org Cc: rostedt@goodmis.org Cc: linux-kernel@vger.kernel.org Signed-off-by: He Zhe <zhe.he@windriver.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-10-02printk: CON_PRINTBUFFER console registration is a bit racySergey Senozhatsky
CON_PRINTBUFFER console registration requires us to do several preparation steps: - Rollback console_seq to replay logbuf messages which were already seen on other consoles; - Set exclusive_console flag so console_unlock() will ->write() logbuf messages only to the exclusive_console driver. The way we do it, however, is a bit racy logbuf_lock_irqsave(flags); console_seq = syslog_seq; console_idx = syslog_idx; logbuf_unlock_irqrestore(flags); << preemption enabled << irqs enabled exclusive_console = newcon; console_unlock(); We rollback console_seq under logbuf_lock with IRQs disabled, but we set exclusive_console with local IRQs enabled and logbuf unlocked. If the system oops-es or panic-s before we set exclusive_console - and given that we have IRQs and preemption enabled there is such a possibility - we will re-play all logbuf messages to every registered console, which may be a bit annoying and time consuming. Move exclusive_console assignment to the same IRQs-disabled and logbuf_lock-protected section where we rollback console_seq. Link: http://lkml.kernel.org/r/20180928095304.9972-1-sergey.senozhatsky@gmail.com To: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-10-02printk: Do not miss new messages when replaying the logPetr Mladek
The variable "exclusive_console" is used to reply all existing messages on a newly registered console. It is cleared when all messages are out. The problem is that new messages might appear in the meantime. These are then visible only on the exclusive console. The obvious solution is to clear "exclusive_console" after we replay all messages that were already proceed before we started the reply. Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Link: http://lkml.kernel.org/r/20180913123406.14378-1-pmladek@suse.com To: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: linux-kernel@vger.kernel.org Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-09-13Merge tag 'printk-for-4.19-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk fix from Petr Mladek: "Revert a commit that caused "quiet", "debug", and "loglevel" early parameters to be ignored for early boot messages" * tag 'printk-for-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: Revert "printk: make sure to print log on console."
2018-09-11Revert "printk: make sure to print log on console."Petr Mladek
This reverts commit 375899cddcbb26881b03cb3fbdcfd600e4e67f4a. The visibility of early messages did not longer take into account "quiet", "debug", and "loglevel" early parameters. It would be possible to invalidate and recompute LOG_NOCONS flag for the affected messages. But it would be hairy. Instead this patch just reverts the problematic commit. We could come up with a better solution for the original problem. For example, we could simplify the logic and just mark messages that should always be visible or always invisible on the console. Also this patch reverts the related build fix commit ffaa619af1b06 ("printk: Fix warning about unused suppress_message_printing"). Finally, this patch does not put back the unused LOG_NOCONS flag. Link: http://lkml.kernel.org/r/20180910145747.emvfzv4mzlk5dfqk@pathway.suse.cz Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: linux-kernel@vger.kernel.org Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Maninder Singh <maninder1.s@samsung.com> Reported-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-09-06printk/tracing: Do not trace printk_nmi_enter()Steven Rostedt (VMware)
I hit the following splat in my tests: ------------[ cut here ]------------ IRQs not enabled as expected WARNING: CPU: 3 PID: 0 at kernel/time/tick-sched.c:982 tick_nohz_idle_enter+0x44/0x8c Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6table_filter ip6_tables ipv6 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.19.0-rc2-test+ #2 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 EIP: tick_nohz_idle_enter+0x44/0x8c Code: ec 05 00 00 00 75 26 83 b8 c0 05 00 00 00 75 1d 80 3d d0 36 3e c1 00 75 14 68 94 63 12 c1 c6 05 d0 36 3e c1 01 e8 04 ee f8 ff <0f> 0b 58 fa bb a0 e5 66 c1 e8 25 0f 04 00 64 03 1d 28 31 52 c1 8b EAX: 0000001c EBX: f26e7f8c ECX: 00000006 EDX: 00000007 ESI: f26dd1c0 EDI: 00000000 EBP: f26e7f40 ESP: f26e7f38 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010296 CR0: 80050033 CR2: 0813c6b0 CR3: 2f342000 CR4: 001406f0 Call Trace: do_idle+0x33/0x202 cpu_startup_entry+0x61/0x63 start_secondary+0x18e/0x1ed startup_32_smp+0x164/0x168 irq event stamp: 18773830 hardirqs last enabled at (18773829): [<c040150c>] trace_hardirqs_on_thunk+0xc/0x10 hardirqs last disabled at (18773830): [<c040151c>] trace_hardirqs_off_thunk+0xc/0x10 softirqs last enabled at (18773824): [<c0ddaa6f>] __do_softirq+0x25f/0x2bf softirqs last disabled at (18773767): [<c0416bbe>] call_on_stack+0x45/0x4b ---[ end trace b7c64aa79e17954a ]--- After a bit of debugging, I found what was happening. This would trigger when performing "perf" with a high NMI interrupt rate, while enabling and disabling function tracer. Ftrace uses breakpoints to convert the nops at the start of functions to calls to the function trampolines. The breakpoint traps disable interrupts and this makes calls into lockdep via the trace_hardirqs_off_thunk in the entry.S code. What happens is the following: do_idle { [interrupts enabled] <interrupt> [interrupts disabled] TRACE_IRQS_OFF [lockdep says irqs off] [...] TRACE_IRQS_IRET test if pt_regs say return to interrupts enabled [yes] TRACE_IRQS_ON [lockdep says irqs are on] <nmi> nmi_enter() { printk_nmi_enter() [traced by ftrace] [ hit ftrace breakpoint ] <breakpoint exception> TRACE_IRQS_OFF [lockdep says irqs off] [...] TRACE_IRQS_IRET [return from breakpoint] test if pt_regs say interrupts enabled [no] [iret back to interrupt] [iret back to code] tick_nohz_idle_enter() { lockdep_assert_irqs_enabled() [lockdep say no!] Although interrupts are indeed enabled, lockdep thinks it is not, and since we now do asserts via lockdep, it gives a false warning. The issue here is that printk_nmi_enter() is called before lockdep_off(), which disables lockdep (for this reason) in NMIs. By simply not allowing ftrace to see printk_nmi_enter() (via notrace annotation) we keep lockdep from getting confused. Cc: stable@vger.kernel.org Fixes: 42a0bb3f71383 ("printk/nmi: generic solution for safe printk in NMI") Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-30notifier: Remove notifier header file wherever not usedMukesh Ojha
The conversion of the hotplug notifiers to a state machine left the notifier.h includes around in some places. Remove them. Signed-off-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1535114033-4605-1-git-send-email-mojha@codeaurora.org
2018-08-23Merge tag 'fbdev-v4.19' of https://github.com/bzolnier/linuxLinus Torvalds
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "Mostly small fixes and cleanups for fb drivers (the biggest updates are for udlfb and pxafb drivers). This also adds deferred console takeover support to the console code and efifb driver. Summary: - add support for deferred console takeover, when enabled defers fbcon taking over the console from the dummy console until the first text is displayed on the console - together with the "quiet" kernel commandline option this allows fbcon to still be used together with a smooth graphical bootup (Hans de Goede) - improve console locking debugging code (Thomas Zimmermann) - copy the ACPI BGRT boot graphics to the framebuffer when deferred console takeover support is used in efifb driver (Hans de Goede) - update udlfb driver - fix lost console when the user unplugs a USB adapter, fix the screen corruption issue, fix locking and add some performance optimizations (Mikulas Patocka) - update pxafb driver - fix using uninitialized memory, switch to devm_* API, handle initialization errors and add support for lcd-supply regulator (Daniel Mack) - add support for boards booted with a DeviceTree in pxa3xx_gcu driver (Daniel Mack) - rename omap2 module to omap2fb.ko to avoid conflicts with omap1 driver (Arnd Bergmann) - enable ACPI-based enumeration for goldfishfb driver (Yu Ning) - fix goldfishfb driver to make user space Android code use 60 fps (Christoffer Dall) - print big fat warning when nomodeset kernel parameter is used in vgacon driver (Lyude Paul) - remove VLA usage from fsl-diu-fb driver (Kees Cook) - misc fixes (Julia Lawall, Geert Uytterhoeven, Fredrik Noring, Yisheng Xie, Dan Carpenter, Daniel Vetter, Anton Vasilyev, Randy Dunlap, Gustavo A. R. Silva, Colin Ian King, Fengguang Wu) - misc cleanups (Roman Kiryanov, Yisheng Xie, Colin Ian King)" * tag 'fbdev-v4.19' of https://github.com/bzolnier/linux: (54 commits) Documentation/fb: corrections for fbcon.txt fbcon: Do not takeover the console from atomic context dummycon: Stop exporting dummycon_[un]register_output_notifier fbcon: Only defer console takeover if the current console driver is the dummycon fbcon: Only allow FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER if fbdev is builtin fbdev: omap2: omapfb: fix ifnullfree.cocci warnings fbdev: omap2: omapfb: fix bugon.cocci warnings fbdev: omap2: omapfb: fix boolreturn.cocci warnings fb: amifb: fix build warnings when not builtin fbdev/core: Disable console-lock warnings when fb.lockless_register_fb is set console: Replace #if 0 with atomic var 'ignore_console_lock_warning' udlfb: use spin_lock_irq instead of spin_lock_irqsave udlfb: avoid prefetch udlfb: optimization - test the backing buffer udlfb: allow reallocating the framebuffer udlfb: set line_length in dlfb_ops_set_par udlfb: handle allocation failure udlfb: set optimal write delay udlfb: make a local copy of fb_ops udlfb: don't switch if we are switching to the same videomode ...
2018-08-22init: allow initcall tables to be emitted using relative referencesArd Biesheuvel
Allow the initcall tables to be emitted using relative references that are only half the size on 64-bit architectures and don't require fixups at runtime on relocatable kernels. Link: http://lkml.kernel.org/r/20180704083651.24360-5-ard.biesheuvel@linaro.org Acked-by: James Morris <james.morris@microsoft.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Petr Mladek <pmladek@suse.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morris <jmorris@namei.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-15Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.19. Rob has some new hardware support for new qualcomm hw that I'll send along separately. This has the display part of it, the remaining pull is for the acceleration engine. This also contains a wound-wait/wait-die mutex rework, Peter has acked it for merging via my tree. Otherwise mostly the usual level of activity. Summary: core: - Wound-wait/wait-die mutex rework - Add writeback connector type - Add "content type" property for HDMI - Move GEM bo to drm_framebuffer - Initial gpu scheduler documentation - GPU scheduler fixes for dying processes - Console deferred fbcon takeover support - Displayport support for CEC tunneling over AUX panel: - otm8009a panel driver fixes - Innolux TV123WAM and G070Y2-L01 panel driver - Ilitek ILI9881c panel driver - Rocktech RK070ER9427 LCD - EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6 - DLC DLC0700YZG-1 - BOE HV070WSA-100 - newhaven, nhd-4.3-480272ef-atxl LCD - DataImage SCF0700C48GGU18 - Sharp LQ035Q7DB03 - p079zca: Refactor to support multiple panels tinydrm: - ILI9341 display panel New driver: - vkms - virtual kms driver to testing. i915: - Icelake: Display enablement DSI support IRQ support Powerwell support - GPU reset fixes and improvements - Full ppgtt support refactoring - PSR fixes and improvements - Execlist improvments - GuC related fixes amdgpu: - Initial amdgpu documentation - JPEG engine support on VCN - CIK uses powerplay by default - Move to using core PCIE functionality for gens/lanes - DC/Powerplay interface rework - Stutter mode support for RV - Vega12 Powerplay updates - GFXOFF fixes - GPUVM fault debugging - Vega12 GFXOFF - DC improvements - DC i2c/aux changes - UVD 7.2 fixes - Powerplay fixes for Polaris12, CZ/ST - command submission bo_list fixes amdkfd: - Raven support - Power management fixes udl: - Cleanups and fixes nouveau: - misc fixes and cleanups. msm: - DPU1 support display controller in sdm845 - GPU coredump support. vmwgfx: - Atomic modesetting validation fixes - Support for multisample surfaces armada: - Atomic modesetting support completed. exynos: - IPPv2 fixes - Move g2d to component framework - Suspend/resume support cleanups - Driver cleanups imx: - CSI configuration improvements - Driver cleanups - Use atomic suspend/resume helpers - ipu-v3 V4L2 XRGB32/XBGR32 support pl111: - Add Nomadik LCDC variant v3d: - GPU scheduler jobs management sun4i: - R40 display engine support - TCON TOP driver mediatek: - MT2712 SoC support rockchip: - vop fixes omapdrm: - Workaround for DRA7 errata i932 - Fix mm_list locking mali-dp: - Writeback implementation PM improvements - Internal error reporting debugfs tilcdc: - Single fix for deferred probing hdlcd: - Teardown fixes tda998x: - Converted to a bridge driver. etnaviv: - Misc fixes" * tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits) drm/amdgpu/sriov: give 8s for recover vram under RUNTIME drm/scheduler: fix param documentation drm/i2c: tda998x: correct PLL divider calculation drm/i2c: tda998x: get rid of private fill_modes function drm/i2c: tda998x: move mode_valid() to bridge drm/i2c: tda998x: register bridge outside of component helper drm/i2c: tda998x: cleanup from previous changes drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create() drm/i2c: tda998x: convert to bridge driver drm/scheduler: fix timeout worker setup for out of order job completions drm/amd/display: display connected to dp-1 does not light up drm/amd/display: update clk for various HDMI color depths drm/amd/display: program display clock on cache match drm/amd/display: Add NULL check for enabling dp ss drm/amd/display: add vbios table check for enabling dp ss drm/amd/display: Don't share clk source between DP and HDMI drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo drm/amd/display: Use calculated disp_clk_khz value for dce110 drm/amd/display: Implement custom degamma lut on dcn drm/amd/display: Destroy aux_engines only once ...
2018-08-14Merge branch 'for-4.19-nmi' into for-linusPetr Mladek
2018-07-31console: Replace #if 0 with atomic var 'ignore_console_lock_warning'Thomas Zimmermann
The macro WARN_CONSOLE_UNLOCKED prints a warning when a thread enters the console's critical section without having acquired the console lock. The console lock can be ignored when debugging the console using printk, but this makes WARN_CONSOLE_UNLOCKED generate unnecessary warnings. The variable ignore_console_lock_warning temporarily disables WARN_CONSOLE_UNLOCKED. Developers interested in debugging the console's critical sections should increment it before entering the CS and decrement it after leaving the CS. Setting ignore_console_lock_warning is only for debugging. Regular operation should not manipulate it. Acknoledgements: This patch is based on an earlier version by Steven Rostedt. The use of atomic increment/decrement was suggested by Petr Mladek. Link: http://lkml.kernel.org/r/717e6337-e7a6-7a92-1c1b-8929a25696b5@suse.de Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> [b.zolnierkie: use <linux/atomic.h>] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-07-11printk: Fix warning about unused suppress_message_printingPetr Mladek
suppress_message_printing() is not longer called in console_unlock(). Therefore it is not longer needed with disabled CONFIG_PRINTK. This fixes the warning: kernel/printk/printk.c:2033:13: warning: ‘suppress_message_printing’ defined but not used [-Wunused-function] static bool suppress_message_printing(int level) { return false; } Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Maninder Singh <maninder1.s@samsung.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-07-09printk/nmi: Prevent deadlock when accessing the main log buffer in NMIPetr Mladek
The commit 719f6a7040f1bdaf96 ("printk: Use the main logbuf in NMI when logbuf_lock is available") brought back the possible deadlocks in printk() and NMI. The check of logbuf_lock is done only in printk_nmi_enter() to prevent mixed output. But another CPU might take the lock later, enter NMI, and: + Both NMIs might be serialized by yet another lock, for example, the one in nmi_cpu_backtrace(). + The other CPU might get stopped in NMI, see smp_send_stop() in panic(). The only safe solution is to use trylock when storing the message into the main log-buffer. It might cause reordering when some lines go to the main lock buffer directly and others are delayed via the per-CPU buffer. It means that it is not useful in general. This patch replaces the problematic NMI deferred context with NMI direct context. It can be used to mark a code that might produce many messages in NMI and the risk of losing them is more critical than problems with eventual reordering. The context is then used when dumping trace buffers on oops. It was the primary motivation for the original fix. Also the reordering is even smaller issue there because some traces have their own time stamps. Finally, nmi_cpu_backtrace() need not longer be serialized because it will always us the per-CPU buffers again. Fixes: 719f6a7040f1bdaf96 ("printk: Use the main logbuf in NMI when logbuf_lock is available") Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180627142028.11259-1-pmladek@suse.com To: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-07-09printk: Create helper function to queue deferred console handlingPetr Mladek
It is just a preparation step. The patch does not change the existing behavior. Link: http://lkml.kernel.org/r/20180627140817.27764-3-pmladek@suse.com To: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-07-09printk: Split the code for storing a message into the log bufferPetr Mladek
It is just a preparation step. The patch does not change the existing behavior. Link: http://lkml.kernel.org/r/20180627140817.27764-2-pmladek@suse.com To: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-07-09printk: Clean up syslog_print_all()Petr Mladek
syslog_print_all() is called twice. Once with a valid buffer and once just to set the indexes. Both variants are already handled separately. This patch just makes it more obvious. It does not change the existing behavior. Link: http://lkml.kernel.org/r/20180627150641.p56xyy6mdzvnfpig@pathway.suse.cz Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Namit Gupta <gupta.namit@samsung.com> Cc: linux-kernel@vger.kernel.org Cc: pankaj.m@samsung.com Cc: a.sahrawat@samsung.com Cc: himanshu.m@samsung.com Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-06-28printk: Export is_console_lockedHans de Goede
This is a preparation patch for adding a number of WARN_CONSOLE_UNLOCKED() calls to the fbcon code, which may be built as a module (event though usually it is not). Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-06-27printk: Remove unnecessary kmalloc() from syslog during clearNamit Gupta
When the request is only for clearing logs, there is no need for allocation/deallocation. Only the indexes need to be reset and returned. Rest of the patch is mostly made up of changes because of indention. Link: http://lkml.kernel.org/r/20180620135951epcas5p3bd2a8f25ec689ca333bce861b527dba2~54wyKcT0_3155531555epcas5p3y@epcas5p3.samsung.com Cc: linux-kernel@vger.kernel.org Cc: pankaj.m@samsung.com Cc: a.sahrawat@samsung.com Signed-off-by: Namit Gupta <gupta.namit@samsung.com> Signed-off-by: Himanshu Maithani <himanshu.m@samsung.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-06-27printk: make sure to print log on console.Maninder Singh
This patch make sure printing of log on console if loglevel at time of storing log is less than current console loglevel. @why In SMP printk can work asynchronously, logs can be missed on console because it checks current log level at time of console_unlock, not at time of storing logs. func() { .... .... console_verbose(); // user wants to have all the logs on console. pr_alert(); dump_backtrace(); //prints with default loglevel. ... console_silent(); // stop all logs from printing on console. } Now if console_lock was owned by another process, the messages might be handled after the consoles were silenced. Reused flag LOG_NOCONS as its usage is gone long back by the commit 5c2992ee7fd8a29d0412 ("printk: remove console flushing special cases for partial buffered lines"). Note that there are still some corner cases where this patch is not enough. For example, when the messages are flushed later from printk_safe buffers or when there are races between console_verbose() and console_silent() callers. Link: http://lkml.kernel.org/r/20180601090029epcas5p3cc93d4bfbebb3199f0a2684058da7e26~z-a_jkmrI2993329933epcas5p3q@epcas5p3.samsung.com Cc: linux-kernel@vger.kernel.org Cc: a.sahrawat@samsung.com Cc: pankaj.m@samsung.com Cc: v.narang@samsung.com Cc: <maninder1.s@samsung.com> Signed-off-by: Vaneet Narang <v.narang@samsung.com> Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-06-06Merge tag 'printk-for-4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Help userspace log daemons to catch up with a flood of messages. They will get woken after each message even if the console is far behind and handled by another process. - Flush printk safe buffers safely even when panic() happens in the normal context. - Fix possible va_list reuse when race happened in printk_safe(). - Remove %pCr printf format to prevent sleeping in the atomic context. - Misc vsprintf code cleanup. * tag 'printk-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: drop in_nmi check from printk_safe_flush_on_panic() lib/vsprintf: Remove atomic-unsafe support for %pCr serial: sh-sci: Stop using printk format %pCr thermal: bcm2835: Stop using printk format %pCr clk: renesas: cpg-mssr: Stop using printk format %pCr printk: fix possible reuse of va_list variable printk: wake up klogd in vprintk_emit vsprintf: Tweak pF/pf comment lib/vsprintf: Mark expected switch fall-through lib/vsprintf: Replace space with '_' before crng is ready lib/vsprintf: Deduplicate pointer_string() lib/vsprintf: Move pointer_string() upper lib/vsprintf: Make flag_spec global lib/vsprintf: Make strspec global lib/vsprintf: Make dec_spec global lib/test_printf: Mark big constant with UL
2018-06-05printk: drop in_nmi check from printk_safe_flush_on_panic()Sergey Senozhatsky
Drop the in_nmi() check from printk_safe_flush_on_panic() and attempt to re-init (IOW unlock) locked logbuf spinlock from panic CPU regardless of its context. Otherwise, theoretically, we can deadlock on logbuf trying to flush per-CPU buffers: a) Panic CPU is running in non-NMI context b) Panic CPU sends out shutdown IPI via reboot vector c) Panic CPU fails to stop all remote CPUs d) Panic CPU sends out shutdown IPI via NMI vector One of the CPUs that we bring down via NMI vector can hold logbuf spin lock (theoretically). Link: http://lkml.kernel.org/r/20180530070350.10131-1-sergey.senozhatsky@gmail.com To: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-05-16printk: fix possible reuse of va_list variableTetsuo Handa
I noticed that there is a possibility that printk_safe_log_store() causes kernel oops because "args" parameter is passed to vsnprintf() again when atomic_cmpxchg() detected that we raced. Fix this by using va_copy(). Link: http://lkml.kernel.org/r/201805112002.GIF21216.OFVHFOMLJtQFSO@I-love.SAKURA.ne.jp Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: dvyukov@google.com Cc: syzkaller@googlegroups.com Cc: fengguang.wu@intel.com Cc: linux-kernel@vger.kernel.org Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 42a0bb3f71383b45 ("printk/nmi: generic solution for safe printk in NMI") Cc: 4.7+ <stable@vger.kernel.org> # v4.7+ Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-04-25printk: wake up klogd in vprintk_emitSergey Senozhatsky
We wake up klogd very late - only when current console_sem owner is done pushing pending kernel messages to the serial/net consoles. In some cases this results in lost syslog messages, because kernel log buffer is a circular buffer and if we don't wakeup syslog long enough there are chances that logbuf simply will wrap around. The patch moves the klogd wake up call to vprintk_emit(), which is the only legit way for a kernel message to appear in the logbuf, right after the attempt to handle consoles. As a result, klogd will get waken either after flushing the new message to consoles or immediately when consoles are still busy with older messages. Link: http://lkml.kernel.org/r/20180419014250.5692-1-sergey.senozhatsky@gmail.com To: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-04-10Merge tag 'trace-v4.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "New features: - Tom Zanussi's extended histogram work. This adds the synthetic events to have histograms from multiple event data Adds triggers "onmatch" and "onmax" to call the synthetic events Several updates to the histogram code from this - Allow way to nest ring buffer calls in the same context - Allow absolute time stamps in ring buffer - Rewrite of filter code parsing based on Al Viro's suggestions - Setting of trace_clock to global if TSC is unstable (on boot) - Better OOM handling when allocating large ring buffers - Added initcall tracepoints (consolidated initcall_debug code with them) And other various fixes and clean ups" * tag 'trace-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits) init: Have initcall_debug still work without CONFIG_TRACEPOINTS init, tracing: Have printk come through the trace events for initcall_debug init, tracing: instrument security and console initcall trace events init, tracing: Add initcall trace events tracing: Add rcu dereference annotation for test func that touches filter->prog tracing: Add rcu dereference annotation for filter->prog tracing: Fixup logic inversion on setting trace_global_clock defaults tracing: Hide global trace clock from lockdep ring-buffer: Add set/clear_current_oom_origin() during allocations ring-buffer: Check if memory is available before allocation lockdep: Add print_irqtrace_events() to __warn vsprintf: Do not preprocess non-dereferenced pointers for bprintf (%px and %pK) tracing: Uninitialized variable in create_tracing_map_fields() tracing: Make sure variable string fields are NULL-terminated tracing: Add action comparisons when testing matching hist triggers tracing: Don't add flag strings when displaying variable references tracing: Fix display of hist trigger expressions containing timestamps ftrace: Drop a VLA in module_exists() tracing: Mention trace_clock=global when warning about unstable clocks tracing: Default to using trace_global_clock if sched_clock is unstable ...
2018-04-06init, tracing: instrument security and console initcall trace eventsAbderrahmane Benbachir
Trace events have been added around the initcall functions defined in init/main.c. But console and security have their own initcalls. This adds the trace events associated for those initcall functions. Link: http://lkml.kernel.org/r/1521765208.19745.2.camel@polymtl.ca Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Abderrahmane Benbachir <abderrahmane.benbachir@polymtl.ca> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-05Merge branch 'for-4.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Add info about loaded kdump kernel into the dump stack header - Move dump-stack related code from printk.c to lib/dump_stack.c - Write message about suspending consoles in KERN_INFO log level * 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: change message to pr_info printk: move dump stack related code to lib/dump_stack.c print kdump kernel loaded status in stack dump
2018-03-23printk: change message to pr_infoTomeu Vizoso
To allow userspace to prevent this message from appearing in the console by changing the log priority. This matches other informative messages that the power subsystem emits when the system changes power states. Link: http://lkml.kernel.org/r/20180322135833.16602-1-tomeu.vizoso@collabora.com To: linux-kernel@vger.kernel.org Cc: kernel@collabora.com Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-03-15printk: move dump stack related code to lib/dump_stack.cDave Young
dump_stack related stuff should belong to lib/dump_stack.c thus move them there. Also conditionally compile lib/dump_stack.c since dump_stack code does not make sense if printk is disabled. Link: http://lkml.kernel.org/r/20180213072834.GA24784@dhcp-128-65.nay.redhat.com To: Steven Rostedt <rostedt@goodmis.org> Cc: linux-kernel@vger.kernel.org Cc: akpm@linux-foundation.org Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Dave Young <dyoung@redhat.com> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Suggested-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-03-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk fix from Petr Mladek: "Make sure that we wake up userspace loggers. This fixes a race introduced by the console waiter logic during this merge window" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: Wake klogd when passing console_lock owner
2018-02-27printk: Wake klogd when passing console_lock ownerPetr Mladek
wake_klogd is a local variable in console_unlock(). The information is lost when the console_lock owner using the busy wait added by the commit dbdda842fe96f8932 ("printk: Add console owner and waiter logic to load balance console writes"). The following race is possible: CPU0 CPU1 console_unlock() for (;;) /* calling console for last message */ printk() log_store() log_next_seq++; /* see new message */ if (seen_seq != log_next_seq) { wake_klogd = true; seen_seq = log_next_seq; } console_lock_spinning_enable(); if (console_trylock_spinning()) /* spinning */ if (console_lock_spinning_disable_and_check()) { printk_safe_exit_irqrestore(flags); return; console_unlock() if (seen_seq != log_next_seq) { /* already seen */ /* nothing to do */ Result: Nobody would wakeup klogd. One solution would be to make a global variable from wake_klogd. But then we would need to manipulate it under a lock or so. This patch wakes klogd also when console_lock is passed to the spinning waiter. It looks like the right way to go. Also userspace should have a chance to see and store any "flood" of messages. Note that the very late klogd wake up was a historic solution. It made sense on single CPU systems or when sys_syslog() operations were synchronized using the big kernel lock like in v2.1.113. But it is questionable these days. Fixes: dbdda842fe96f8932 ("printk: Add console owner and waiter logic to load balance console writes") Link: http://lkml.kernel.org/r/20180226155734.dzwg3aovqnwtvkoy@pathway.suse.cz Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-kernel@vger.kernel.org Cc: Tejun Heo <tj@kernel.org> Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-08print kdump kernel loaded status in stack dumpDave Young
It is useful to print kdump kernel loaded status in dump_stack() especially when panic happens so that we can differenciate kdump kernel early hang and a normal panic in a bug report. Link: http://lkml.kernel.org/r/20180127041129.GA29016@dhcp-128-65.nay.redhat.com To: Steven Rostedt <rostedt@goodmis.org> To: Andi Kleen <ak@linux.intel.com> To: kexec@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: akpm@linux-foundation.org Cc: kexec@lists.infradead.org Signed-off-by: Dave Young <dyoung@redhat.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-02-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Add a console_msg_format command line option: The value "default" keeps the old "[time stamp] text\n" format. The value "syslog" allows to see the syslog-like "<log level>[timestamp] text" format. This feature was requested by people doing regression tests, for example, 0day robot. They want to have both filtered and full logs at hands. - Reduce the risk of softlockup: Pass the console owner in a busy loop. This is a new approach to the old problem. It was first proposed by Steven Rostedt on Kernel Summit 2017. It marks a context in which the console_lock owner calls console drivers and could not sleep. On the other side, printk() callers could detect this state and use a busy wait instead of a simple console_trylock(). Finally, the console_lock owner checks if there is a busy waiter at the end of the special context and eventually passes the console_lock to the waiter. The hand-off works surprisingly well and helps in many situations. Well, there is still a possibility of the softlockup, for example, when the flood of messages stops and the last owner still has too much to flush. There is increasing number of people having problems with printk-related softlockups. We might eventually need to get better solution. Anyway, this looks like a good start and promising direction. - Do not allow to schedule in console_unlock() called from printk(): This reverts an older controversial commit. The reschedule helped to avoid softlockups. But it also slowed down the console output. This patch is obsoleted by the new console waiter logic described above. In fact, the reschedule made the hand-off less effective. - Deprecate "%pf" and "%pF" format specifier: It was needed on ia64, ppc64 and parisc64 to dereference function descriptors and show the real function address. It is done transparently by "%ps" and "pS" format specifier now. Sergey Senozhatsky found that all the function descriptors were in a special elf section and could be easily detected. - Remove printk_symbol() API: It has been obsoleted by "%pS" format specifier, and this change helped to remove few continuous lines and a less intuitive old API. - Remove redundant memsets: Sergey removed unnecessary memset when processing printk.devkmsg command line option. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (27 commits) printk: drop redundant devkmsg_log_str memsets printk: Never set console_may_schedule in console_trylock() printk: Hide console waiter logic into helpers printk: Add console owner and waiter logic to load balance console writes kallsyms: remove print_symbol() function checkpatch: add pF/pf deprecation warning symbol lookup: introduce dereference_symbol_descriptor() parisc64: Add .opd based function descriptor dereference powerpc64: Add .opd based function descriptor dereference ia64: Add .opd based function descriptor dereference sections: split dereference_function_descriptor() openrisc: Fix conflicting types for _exext and _stext lib: do not use print_symbol() irq debug: do not use print_symbol() sysfs: do not use print_symbol() drivers: do not use print_symbol() x86: do not use print_symbol() unicore32: do not use print_symbol() sh: do not use print_symbol() mn10300: do not use print_symbol() ...
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-22Merge branch 'for-4.16-console-waiter-logic' into for-4.16Petr Mladek