| Age | Commit message (Collapse) | Author |
|---|
|
This commit changes from "%lx" to "%x" and from "0x1ffffL" to "0x1ffff"
to match the change in type between the old field ->state (unsigned long)
and the new field ->__state (unsigned int).
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Invoking trc_del_holdout() from within trc_wait_for_one_reader() is
only a performance optimization because the RCU Tasks Trace grace-period
kthread will eventually do this within check_all_holdout_tasks_trace().
But it is not a particularly important performance optimization because
it only applies to the grace-period kthread, of which there is but one.
This commit therefore removes this invocation of trc_del_holdout() in
favor of the one in check_all_holdout_tasks_trace() in the grace-period
kthread.
Reported-by: "Xu, Yanfei" <yanfei.xu@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
As Yanfei pointed out, although invoking trc_del_holdout() is safe
from the viewpoint of the integrity of the holdout list itself,
the put_task_struct() invoked by trc_del_holdout() can result in
use-after-free errors due to later accesses to this task_struct structure
by the RCU Tasks Trace grace-period kthread.
This commit therefore removes this call to trc_del_holdout() from
trc_inspect_reader() in favor of the grace-period thread's existing call
to trc_del_holdout(), thus eliminating that particular class of
use-after-free errors.
Reported-by: "Xu, Yanfei" <yanfei.xu@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If the call to set_cpus_allowed_ptr() in ref_scale_reader()
fails, a later WARN_ONCE() complains. But with the advent of
570a752b7a9b ("lib/smp_processor_id: Use is_percpu_thread() instead of
nr_cpus_allowed"), this complaint can be drowned out by complaints from
smp_processor_id(). The rationale for this change is that refscale's
kthreads are not marked with PF_NO_SETAFFINITY, which means that a system
administrator could change affinity at any time.
However, refscale is a performance/stress test, and the system
administrator might well have a valid test-the-test reason for changing
affinity. This commit therefore changes to raw_smp_processor_id()
in order to avoid the noise, and also adds a WARN_ON_ONCE() to the
call to set_cpus_allowed_ptr() in order to directly detect immediate
failure. There is no WARN_ON_ONCE() within the test loop, allowing
human-reflex-based affinity resetting, if desired.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Bitmap parsing support for "all" as an alias for all bits
- Documentation updates
- Miscellaneous fixes, including some that overlap into mm and lockdep
- kvfree_rcu() updates
- mem_dump_obj() updates, with acks from one of the slab-allocator
maintainers
- RCU NOCB CPU updates, including limited deoffloading
- SRCU updates
- Tasks-RCU updates
- Torture-test updates
* 'core-rcu-2021.07.04' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (78 commits)
tasks-rcu: Make show_rcu_tasks_gp_kthreads() be static inline
rcu-tasks: Make ksoftirqd provide RCU Tasks quiescent states
rcu: Add missing __releases() annotation
rcu: Remove obsolete rcu_read_unlock() deadlock commentary
rcu: Improve comments describing RCU read-side critical sections
rcu: Create an unrcu_pointer() to remove __rcu from a pointer
srcu: Early test SRCU polling start
rcu: Fix various typos in comments
rcu/nocb: Unify timers
rcu/nocb: Prepare for fine-grained deferred wakeup
rcu/nocb: Only cancel nocb timer if not polling
rcu/nocb: Delete bypass_timer upon nocb_gp wakeup
rcu/nocb: Cancel nocb_timer upon nocb_gp wakeup
rcu/nocb: Allow de-offloading rdp leader
rcu/nocb: Directly call __wake_nocb_gp() from bypass timer
rcu: Don't penalize priority boosting when there is nothing to boost
rcu: Point to documentation of ordering guarantees
rcu: Make rcu_gp_cleanup() be noinline for tracing
rcu: Restrict RCU_STRICT_GRACE_PERIOD to at most four CPUs
rcu: Make show_rcu_gp_kthreads() dump rcu_node structures blocking GP
...
|
|
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
|
|
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.
There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain
At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.
[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change the type and name of task_struct::state. Drop the volatile and
shrink it to an 'unsigned int'. Rename it in order to find all uses
such that we can use READ_ONCE/WRITE_ONCE as appropriate.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20210611082838.550736351@infradead.org
|
|
Replace a bunch of 'p->state == TASK_RUNNING' with a new helper:
task_is_running(p).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210611082838.222401495@infradead.org
|
|
'fixes.2021.05.13a', 'kvfree_rcu.2021.05.10c', 'mmdumpobj.2021.05.10c', 'nocb.2021.05.12a', 'srcu.2021.05.12a', 'tasks.2021.05.18a' and 'torture.2021.05.10c' into HEAD
bitmaprange.2021.05.10c: Allow "all" for bitmap ranges.
doc.2021.05.10c: Documentation updates.
fixes.2021.05.13a: Miscellaneous fixes.
kvfree_rcu.2021.05.10c: kvfree_rcu() updates.
mmdumpobj.2021.05.10c: mem_dump_obj() updates.
nocb.2021.05.12a: RCU NOCB CPU updates, including limited deoffloading.
srcu.2021.05.12a: SRCU updates.
tasks.2021.05.18a: Tasks-RCU updates.
torture.2021.05.10c: Torture-test updates.
|
|
In some architectures, the no-op variant of show_rcu_tasks_gp_kthreads()
get "no previous prototype" compiler warnings. These are false positives
given that kernel/rcu/tasks.h is included only once. But why put up
with the compiler noise?
This commit therefore adds "static inline" to this definition to force
the compiler to accept this situation, while also moving it to its proper
place in kernel/rcu/rcu.h.
Reported-by: kernel test robot <lkp@intel.com>
[ paulmck: Update per Stephen Rothwell feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Heavy networking load can cause a CPU to execute continuously and
indefinitely within ksoftirqd, in which case there will be no voluntary
task switches and thus no RCU-tasks quiescent states. This commit
therefore causes the exiting rcu_softirq_qs() to provide an RCU-tasks
quiescent state.
This of course means that __do_softirq() and its callers cannot be
invoked from within a tracing trampoline.
Reported-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
|
|
Sparse reports a warning at rcu_print_task_stall():
"warning: context imbalance in rcu_print_task_stall - unexpected unlock"
The root cause is a missing annotation on rcu_print_task_stall().
This commit therefore adds the missing __releases(rnp->lock) annotation.
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
There are a number of places that call out the fact that preempt-disable
regions of code now act as RCU read-side critical sections, where
preempt-disable regions of code include irq-disable regions of code,
bh-disable regions of code, hardirq handlers, and NMI handlers. However,
someone relying solely on (for example) the call_rcu() header comment
might well have no idea that preempt-disable regions of code have RCU
semantics.
This commit therefore updates the header comments for
call_rcu(), synchronize_rcu(), rcu_dereference_bh_check(), and
rcu_dereference_sched_check() to call out these new(ish) forms of RCU
readers.
Reported-by: Michel Lespinasse <michel@lespinasse.org>
[ paulmck: Apply Matthew Wilcox and Michel Lespinasse feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Place an early call to start_poll_synchronize_srcu() before the invocation
of call_srcu() on the same srcu_struct structure.
After the later call to srcu_barrier(), the completion of the
first grace period should be visible to a subsequent invocation of
poll_state_synchronize_srcu(), and if not, warn.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Fix ~12 single-word typos in RCU code comments.
[ paulmck: Apply feedback from Randy Dunlap. ]
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Now that ->nocb_timer and ->nocb_bypass_timer have become quite similar,
this commit merges them together. A new RCU_NOCB_WAKE_BYPASS wake level
is introduced. As a result, timers perform all kinds of deferred wake
ups but other deferred wakeup callsites only handle non-bypass wakeups
in order not to wake up rcuo too early.
The timer also unconditionally executes a full barrier so as to order
timer_pending() and callback enqueue although the path performing
RCU_NOCB_WAKE_FORCE that makes use of it is debatable. It should also
test against the rdp leader instead of the current rdp.
This unconditional full barrier shouldn't bring visible overhead since
these timers almost never fire.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Tuning the deferred wakeup level must be done from a safe wakeup
point. Currently those sites are:
* ->nocb_timer
* user/idle/guest entry
* CPU down
* softirq/rcuc
All of these sites perform the wake up for both RCU_NOCB_WAKE and
RCU_NOCB_WAKE_FORCE.
In order to merge ->nocb_timer and ->nocb_bypass_timer together, we plan
to add a new RCU_NOCB_WAKE_BYPASS that really should be deferred until
a timer fires so that we don't wake up the NOCB-gp kthread too early.
To prepare for that, this commit specifies the per-callsite wakeup
level/limit.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
[ paulmck: Fix non-NOCB rcu_nocb_need_deferred_wakeup() definition. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit refrains deleting the ->nocb_timer if rcu_nocb is polling
because it should not ever have been queued in the polling case.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
A NOCB-gp wake p can safely delete the ->nocb_bypass_timer because
nocb_gp_wait() will recheck again the bypass state and rearm the bypass
timer if necessary. This commit therefore deletes this timer.
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When waking up in nocb_gp_wait(), there is no need to keep the nocb_timer
around because this function will traverse the whole rdp list. Any
update performed before the timer was armed will now be visible after
the ->nocb_gp_lock acquire.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The only thing that prevented an rdp leader from being de-offloaded was
the nocb_bypass_timer that used to lock the nocb_lock of the rdp leader.
If an rdp gets de-offloaded, it will subtlely ignore rcu_nocb_lock()
calls and do its job in the timer unsafely. Worse yet: If it gets
re-offloaded in the middle of the timer, rcu_nocb_unlock() would try to
unlock, leaving it imbalanced.
Now that the nocb_bypass_timer doesn't use the nocb_lock anymore,
de-offloading the rdp leader is now safe. This commit therefore allows
the rdp leader to be de-offloaded.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The bypass timer calls __call_rcu_nocb_wake() instead of directly
calling __wake_nocb_gp(). The only difference here is that
rdp->qlen_last_fqs_check gets overridden. But resetting the deferred
force quiescent state base shouldn't be relevant for that timer. In fact
the bypass queue in question can be for any rdp from the group and not
necessarily the rdp leader on which the bypass timer is attached.
This commit therefore calls __wake_nocb_gp() directly. This way we
don't even need to lock the ->nocb_lock.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
RCU priority boosting cannot do anything unless there is at least one
task blocking the current RCU grace period that was preempted within
the RCU read-side critical section that it still resides in. However,
the current rcu_torture_boost_failed() code will count this as an RCU
priority-boosting failure if there were no CPUs blocking the current
grace period. This situation can happen (for example) if the last CPU
blocking the current grace period was subjected to vCPU preemption,
which is always a risk for rcutorture guest OSes.
This commit therefore causes rcu_torture_boost_failed() to refrain from
reporting failure unless there is at least one task blocking the current
RCU grace period that was preempted within the RCU read-side critical
section that it still resides in.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Add comments to synchronize_rcu() and friends that point to
Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Although there are trace events for RCU grace periods, these are only
enabled in CONFIG_RCU_TRACE=y kernels. This commit therefore marks
rcu_gp_cleanup() noinline in order to provide a function that can be
traced that is invoked near the end of each grace period.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Kernels built with CONFIG_RCU_STRICT_GRACE_PERIOD=y can experience
significant lock contention due to RCU's resulting focus on ending grace
periods as soon as possible. This is OK, but only if there are not very
many CPUs. This commit therefore puts this Kconfig option off-limits
to systems with more than four CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, show_rcu_gp_kthreads() only dumps rcu_node structures that
have outdated ideas of the current grace-period number. This commit
also dumps those that are in any way blocking the current grace period.
This helps diagnose RCU priority boosting failures.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When any CPU comes online, it checks to see if an RCU-boost kthread has
already been created for that CPU's leaf rcu_node structure, and if
not, it creates one. Unfortunately, it also verifies that this leaf
rcu_node structure actually has at least one online CPU, and if not,
it declines to create the kthread. Although this behavior makes sense
during early boot, especially on systems that claim far more CPUs than
they actually have, it makes no sense for the first CPU to come online
for a given rcu_node structure. There is no point in checking because
we know there is a CPU on its way in.
The problem is that timing differences can cause this incoming CPU to not
yet be reflected in the various bit masks even at rcutree_online_cpu()
time, and there is no chance at rcutree_prepare_cpu() time. Plus it
would be better to create the RCU-boost kthread at rcutree_prepare_cpu()
to handle the case where the CPU is involved in an RCU priority inversion
very shortly after it comes online.
This commit therefore moves the checking to rcu_prepare_kthreads(), which
is called only at early boot, when the check is appropriate. In addition,
it makes rcutree_prepare_cpu() invoke rcu_spawn_one_boost_kthread(), which
no longer does any checking for online CPUs.
With this change, RCU priority boosting tests now pass for short rcutorture
runs, even with single-CPU leaf rcu_node structures.
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Scott Wood <swood@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds each rcu_node structure's ->qsmask and "bBEG" output
indicating whether: (1) There is a boost kthread, (2) A reader needs
to be (or is in the process of being) boosted, (3) A reader is blocking
an expedited grace period, and (4) A reader is blocking a normal grace
period. This helps diagnose RCU priority boosting failures.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If another lockdep report runs concurrently with an RCU lockdep report
from RCU_LOCKDEP_WARN(), the following sequence of events can occur:
1. debug_lockdep_rcu_enabled() sees that lockdep is enabled
when called from (say) synchronize_rcu().
2. Lockdep is disabled by a concurrent lockdep report.
3. debug_lockdep_rcu_enabled() evaluates its lockdep-expression
argument, for example, lock_is_held(&rcu_bh_lock_map).
4. Because lockdep is now disabled, lock_is_held() plays it safe and
returns the constant 1.
5. But in this case, the constant 1 is not safe, because invoking
synchronize_rcu() under rcu_read_lock_bh() is disallowed.
6. debug_lockdep_rcu_enabled() wrongly invokes lockdep_rcu_suspicious(),
resulting in a false-positive splat.
This commit therefore changes RCU_LOCKDEP_WARN() to check
debug_lockdep_rcu_enabled() after checking the lockdep expression,
so that any "safe" returns from lock_is_held() are rejected by
debug_lockdep_rcu_enabled(). This requires memory ordering, which is
supplied by READ_ONCE(debug_locks). The resulting volatile accesses
prevent the compiler from reordering and the fact that only one variable
is being accessed prevents the underlying hardware from reordering.
The combination works for IA64, which can reorder reads to the same
location, but this is defeated by the volatile accesses, which compile
to load instructions that provide ordering.
Reported-by: syzbot+dde0cc33951735441301@syzkaller.appspotmail.com
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: syzbot+88e4f02896967fe1ab0d@syzkaller.appspotmail.com
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds ->gp_max to show_rcu_gp_kthreads() output in order to
better diagnose RCU priority boosting failures.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds ->rt_priority and ->gp_start to show_rcu_gp_kthreads()
output in order to better diagnose RCU priority boosting failures.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, rcu_spawn_core_kthreads() is invoked via an early_initcall(),
which works, except that rcu_spawn_gp_kthread() is also invoked via an
early_initcall() and rcu_spawn_core_kthreads() relies on adjustments to
kthread_prio that are carried out by rcu_spawn_gp_kthread(). There is
no guaranttee of ordering among early_initcall() handlers, and thus no
guarantee that kthread_prio will be properly checked and range-limited
at the time that rcu_spawn_core_kthreads() needs it.
In most cases, this bug is harmless. After all, the only reason that
rcu_spawn_gp_kthread() adjusts the value of kthread_prio is if the user
specified a nonsensical value for this boot parameter, which experience
indicates is rare.
Nevertheless, a bug is a bug. This commit therefore causes the
rcu_spawn_core_kthreads() function to be invoked directly from
rcu_spawn_gp_kthread() after any needed adjustments to kthread_prio have
been carried out.
Fixes: 48d07c04b4cc ("rcu: Enable elimination of Tree-RCU softirq processing")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit cleans up some comments and code in kernel/rcu/tree.c.
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Commit 9ee01e0f69a9 ("x86/entry: Clean up idtentry_enter/exit()
leftovers") left the rcu_irq_exit_preempt() in place in order to avoid
conflicts with the -rcu tree. Now that this change has long since hit
mainline, this commit removes the no-longer-used rcu_irq_exit_preempt()
function.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
To make the purpose of the code more apparent, this commit moves the
tests of mem_dump_obj() to a new rcu_torture_mem_dump_obj() function
and calls it from rcu_torture_cleanup().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
It will frequently be the case that rcu_torture_boost() will get a
->start_gp_poll() cookie that needs almost all of the current grace period
plus an additional grace period to elapse before ->poll_gp_state() will
return true. It is quite possible that the current grace period will have
(say) two seconds of stall by a CPU failing to pass through a quiescent
state, followed by 300 milliseconds of delay due to a preempted reader.
The next grace period might suffer only one second of stall by a CPU,
followed by another 300 milliseconds of delay due to a preempted reader.
This is an example of RCU priority boosting doing its job, but the full
elapsed time of 3.6 seconds exceeds the 3.5-second limit. In addition,
there is no CPU stall in force at the 3.5-second mark, so this would
nevertheless currently be counted as an RCU priority boosting failure.
This commit therefore avoids this sort of false positive by resetting
the gp_state_time timestamp any time that the current grace period is
being blocked by a CPU. This results in extremely frequent calls to
the ->check_boost_failed() function, so this commit provides a lockless
fastpath that is selected by supplying a NULL CPU-number pointer.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, rcu_torture_boost() runs CPU-bound at real-time priority
to force RCU priority inversions. It then checks that grace periods
progress during this CPU-bound time. If grace periods fail to progress,
it reports and RCU priority boosting failure.
However, it is possible (and sometimes does happen) that the grace period
fails to progress due to a CPU failing to pass through a quiescent state
for an extended time period (3.5 seconds by default). This can happen
due to vCPU preemption, long-running interrupts, and much else besides.
There is nothing that RCU priority boosting can do about these situations,
and so they should not be counted as RCU priority boosting failures.
This commit therefore checks for CPUs (as opposed to preempted tasks)
holding up a grace period, and flags the resulting RCU priority boosting
failures, but does not splat nor count them as errors. It does rate-limit
them to avoid flooding the console log.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
It is possible that a delayed grace period that rcu_torture_boost()
was polling for ended while rcu_torture_boost_failed() was printing the
failure splat. It would be good to know when this happens. This commit
therefore has rcu_torture_boost_failed() recheck the grace period after
printing the splat, and printing a message indicating whether or not
the grace period has ended.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit consolidates two loops in rcu_torture_boost(), one of which
counts the number of boost-test episodes and the other of which computes
the start time of the next episode, into one loop that does both with but
a single acquisition of boost_mutex. This means that the count of the
number of boost-test episodes is incremented after an episode completes
rather than before it starts, but it also avoids the over-counting that
was possible previously.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
If an rcu_torture_boost() kthread determines that its grace period
has not yet ended, it invokes rcu_torture_boost_failed() which checks
whether enough time has elapsed for this to be considered a failure of
RCU priority boosting, and, if so, flags the error.
Unfortunately, that kthread might be preempted for some seconds between
the time that it checks the grace period and the time that it checks the
time. This delay can result in a false positive, featuring a complaint
that a particular grace period has not ended, followed by a diagnostic
dump featuring a much later grace period.
This commit avoids these false positives by rechecking for the end of
the grace period after the time check.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, rcutorture's testing of RCU priority boosting insists not
only that grace periods complete, but also that callbacks be invoked.
Although this is in fact what the user would want, ensuring that there
is sufficient CPU bandwidth devoted to callback execution is in fact
the user's responsibility. One could argue that rcutorture can take on
that responsibility, which is true in theory. But in practice, ensuring
sufficient CPU bandwidth to ksoftirqd, any rcuc kthreads, and any rcuo
kthreads is not particularly consistent with rcutorture's main job,
that of stress-testing RCU. In addition, if the system administrator
(say) makes very poor choices when pinning rcuo kthreads and then runs
rcutorture, there really isn't much rcutorture can do.
Besides, RCU priority boosting only boosts lagging readers, not all the
machinery required to invoke callbacks in a timely fashion.
This commit therefore switches rcutorture's evaluation of RCU priority
boosting from callback execution to grace-period completion by using
the new start_poll_synchronize_rcu() and poll_state_synchronize_rcu()
functions. When rcutorture is built in (as in when there is no innocent
workload to inconvenience), the ksoftirqd ktheads are boosted to real-time
priority 2 in order to allow timeouts to work properly in the face of
rcutorture's testing of RCU priority boosting.
Indeed, it is not as easy as it looks to create a reliable test of RCU
priority boosting without destroying the rest of the kernel!
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds a (*readlock_held)() function pointer to the
rcu_torture_ops structure in order to make the rcu_torture_one_read()
function's rcu_dereference_check() lockdep expression more appropriate
for a given run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds scale_type of acqrel, lock, and lock-irq to
test acquisition and release. Note that the refscale.nreaders=1
module parameter is required if you wish to test uncontended locking.
In contrast, acqrel uses a per-CPU variable, so should be just fine with
large values of the refscale.nreaders=1 module parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds a block comment that gives a high-level overview of
how RCU Rude grace periods progress. It also gives an overview of the
memory ordering.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds a block comment that gives a high-level overview of how
RCU tasks grace periods progress. It also adds a note about how exiting
tasks are handled, plus it gives an overview of the memory ordering.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
An srcu_struct structure that is initialized before rcu_init_geometry()
will have its srcu_node hierarchy based on CONFIG_NR_CPUS. Once
rcu_init_geometry() is called, this hierarchy is compressed as needed
for the actual maximum number of CPUs for this system.
Later on, that srcu_struct structure is confused, sometimes referring
to its initial CONFIG_NR_CPUS-based hierarchy, and sometimes instead
to the new num_possible_cpus() hierarchy. For example, each of its
->mynode fields continues to reference the original leaf rcu_node
structures, some of which might no longer exist. On the other hand,
srcu_for_each_node_breadth_first() traverses to the new node hierarchy.
There are at least two bad possible outcomes to this:
1) a) A callback enqueued early on an srcu_data structure (call it
*sdp) is recorded pending on sdp->mynode->srcu_data_have_cbs in
srcu_funnel_gp_start() with sdp->mynode pointing to a deep leaf
(say 3 levels).
b) The grace period ends after rcu_init_geometry() shrinks the
nodes level to a single one. srcu_gp_end() walks through the new
srcu_node hierarchy without ever reaching the old leaves so the
callback is never executed.
This is easily reproduced on an 8 CPUs machine with CONFIG_NR_CPUS >= 32
and "rcupdate.rcu_self_test=1". The srcu_barrier() after early tests
verification never completes and the boot hangs:
[ 5413.141029] INFO: task swapper/0:1 blocked for more than 4915 seconds.
[ 5413.147564] Not tainted 5.12.0-rc4+ #28
[ 5413.151927] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 5413.159753] task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00004000
[ 5413.168099] Call Trace:
[ 5413.170555] __schedule+0x36c/0x930
[ 5413.174057] ? wait_for_completion+0x88/0x110
[ 5413.178423] schedule+0x46/0xf0
[ 5413.181575] schedule_timeout+0x284/0x380
[ 5413.185591] ? wait_for_completion+0x88/0x110
[ 5413.189957] ? mark_held_locks+0x61/0x80
[ 5413.193882] ? mark_held_locks+0x61/0x80
[ 5413.197809] ? _raw_spin_unlock_irq+0x24/0x50
[ 5413.202173] ? wait_for_completion+0x88/0x110
[ 5413.206535] wait_for_completion+0xb4/0x110
[ 5413.210724] ? srcu_torture_stats_print+0x110/0x110
[ 5413.215610] srcu_barrier+0x187/0x200
[ 5413.219277] ? rcu_tasks_verify_self_tests+0x50/0x50
[ 5413.224244] ? rdinit_setup+0x2b/0x2b
[ 5413.227907] rcu_verify_early_boot_tests+0x2d/0x40
[ 5413.232700] do_one_initcall+0x63/0x310
[ 5413.236541] ? rdinit_setup+0x2b/0x2b
[ 5413.240207] ? rcu_read_lock_sched_held+0x52/0x80
[ 5413.244912] kernel_init_freeable+0x253/0x28f
[ 5413.249273] ? rest_init+0x250/0x250
[ 5413.252846] kernel_init+0xa/0x110
[ 5413.256257] ret_from_fork+0x22/0x30
2) An srcu_struct structure that is initialized before rcu_init_geometry()
and used afterward will always have stale rdp->mynode references,
resulting in callbacks to be missed in srcu_gp_end(), just like in
the previous scenario.
This commit therefore causes init_srcu_struct_nodes to initialize the
geometry, if needed. This ensures that the srcu_node hierarchy is
properly built and distributed from the get-go.
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Once srcu_init() is called, the SRCU core will make use of delayed
workqueues, which rely on timers. However init_timers() is called
several steps after rcu_init(). This means that a call_srcu() after
rcu_init() but before init_timers() would find itself within a dangerously
uninitialized timer core.
This commit therefore creates a separate call to srcu_init() after
init_timer() completes, which ensures that we stay in early SRCU mode
until timers are safe(r).
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Pre-srcu_init() invocations of call_srcu() initialize the srcu_struct
structure in question, so there is no need to check this initialization
in srcu_init() when initiating grace periods for srcu_struct structures
that had early call_srcu() invocations. This commit therefore drops
the calls to check_init_srcu_struct() in srcu_init().
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
