| Age | Commit message (Collapse) | Author |
|---|
|
Eliminate a useless task_work on execve by moving the call to
rseq_set_notify_resume() from sched_mm_cid_after_execve() to the error
path of bprm_execve().
The call to rseq_set_notify_resume() from sched_mm_cid_after_execve() is
pointless in the success case, because rseq_execve() will clear the rseq
pointer before returning to userspace.
sched_mm_cid_after_execve() is called from both the success and error
paths of bprm_execve(). The call to rseq_set_notify_resume() is needed
on error because the mm_cid may have changed.
Also move the rseq_execve() to right after sched_mm_cid_after_execve()
in bprm_execve().
[ mingo: Merged to a recent upstream kernel, extended the changelog. ]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250327132945.1558783-1-mathieu.desnoyers@efficios.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull latency tracing updates from Steven Rostedt:
- Add some trace events to osnoise and timerlat sample generation
This adds more information to the osnoise and timerlat tracers as
well as allows BPF programs to be attached to these locations to
extract even more data.
- Fix to DECLARE_TRACE_CONDITION() macro
It wasn't used but now will be and it happened to be broken causing
the build to fail.
- Add scheduler specification monitors to runtime verifier (RV)
This is a continuation of Daniel Bristot's work.
RV allows monitors to run and react concurrently. Running the
cumulative model is equivalent to running single components using the
same reactors, with the advantage that it's easier to point out which
specification failed in case of error.
This update introduces nested monitors to RV, in short, the sysfs
monitor folder will contain a monitor named sched, which is nothing
but an empty container for other monitors. Controlling the sched
monitor (enable, disable, set reactors) controls all nested monitors.
The following scheduling monitors are added:
- sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
- tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
- snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
- scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
- snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
- sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
* tag 'trace-latency-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rv: Allow rv list to filter for container
Documentation/rv: Add docs for the sched monitors
verification/dot2k: Add support for nested monitors
tools/rv: Add support for nested monitors
rv: Add scpd, snep and sncid per-cpu monitors
rv: Add snroc per-task monitor
rv: Add sco and tss per-cpu monitors
rv: Add option for nested monitors and include sched
sched: Add sched tracepoints for RV task model
rv: Add license identifiers to monitor files
tracing: Fix DECLARE_TRACE_CONDITION
trace/osnoise: Add trace events for samples
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core & fair scheduler changes:
- Cancel the slice protection of the idle entity (Zihan Zhou)
- Reduce the default slice to avoid tasks getting an extra tick
(Zihan Zhou)
- Force propagating min_slice of cfs_rq when {en,de}queue tasks
(Tianchen Ding)
- Refactor can_migrate_task() to elimate looping (I Hsin Cheng)
- Add unlikey branch hints to several system calls (Colin Ian King)
- Optimize current_clr_polling() on certain architectures (Yujun
Dong)
Deadline scheduler: (Juri Lelli)
- Remove redundant dl_clear_root_domain call
- Move dl_rebuild_rd_accounting to cpuset.h
Uclamp:
- Use the uclamp_is_used() helper instead of open-coding it (Xuewen
Yan)
- Optimize sched_uclamp_used static key enabling (Xuewen Yan)
Scheduler topology support: (Juri Lelli)
- Ignore special tasks when rebuilding domains
- Add wrappers for sched_domains_mutex
- Generalize unique visiting of root domains
- Rebuild root domain accounting after every update
- Remove partition_and_rebuild_sched_domains
- Stop exposing partition_sched_domains_locked
RSEQ: (Michael Jeanson)
- Update kernel fields in lockstep with CONFIG_DEBUG_RSEQ=y
- Fix segfault on registration when rseq_cs is non-zero
- selftests: Add rseq syscall errors test
- selftests: Ensure the rseq ABI TLS is actually 1024 bytes
Membarriers:
- Fix redundant load of membarrier_state (Nysal Jan K.A.)
Scheduler debugging:
- Introduce and use preempt_model_str() (Sebastian Andrzej Siewior)
- Make CONFIG_SCHED_DEBUG unconditional (Ingo Molnar)
Fixes and cleanups:
- Always save/restore x86 TSC sched_clock() on suspend/resume
(Guilherme G. Piccoli)
- Misc fixes and cleanups (Thorsten Blum, Juri Lelli, Sebastian
Andrzej Siewior)"
* tag 'sched-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
cpuidle, sched: Use smp_mb__after_atomic() in current_clr_polling()
sched/debug: Remove CONFIG_SCHED_DEBUG
sched/debug: Remove CONFIG_SCHED_DEBUG from self-test config files
sched/debug, Documentation: Remove (most) CONFIG_SCHED_DEBUG references from documentation
sched/debug: Make CONFIG_SCHED_DEBUG functionality unconditional
sched/debug: Make 'const_debug' tunables unconditional __read_mostly
sched/debug: Change SCHED_WARN_ON() to WARN_ON_ONCE()
rseq/selftests: Fix namespace collision with rseq UAPI header
include/{topology,cpuset}: Move dl_rebuild_rd_accounting to cpuset.h
sched/topology: Stop exposing partition_sched_domains_locked
cgroup/cpuset: Remove partition_and_rebuild_sched_domains
sched/topology: Remove redundant dl_clear_root_domain call
sched/deadline: Rebuild root domain accounting after every update
sched/deadline: Generalize unique visiting of root domains
sched/topology: Wrappers for sched_domains_mutex
sched/deadline: Ignore special tasks when rebuilding domains
tracing: Use preempt_model_str()
xtensa: Rely on generic printing of preemption model
x86: Rely on generic printing of preemption model
s390: Rely on generic printing of preemption model
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Boqun Feng:
"Documentation:
- Add broken-timing possibility to stallwarn.rst
- Improve discussion of this_cpu_ptr(), add raw_cpu_ptr()
- Document self-propagating callbacks
- Point call_srcu() to call_rcu() for detailed memory ordering
- Add CONFIG_RCU_LAZY delays to call_rcu() kernel-doc header
- Clarify RCU_LAZY and RCU_LAZY_DEFAULT_OFF help text
- Remove references to old grace-period-wait primitives
srcu:
- Introduce srcu_read_{un,}lock_fast(), which is similar to
srcu_read_{un,}lock_lite(): avoid smp_mb()s in lock and unlock
at the cost of calling synchronize_rcu() in synchronize_srcu()
Moreover, by returning the percpu offset of the counter at
srcu_read_lock_fast() time, srcu_read_unlock_fast() can avoid
extra pointer dereferencing, which makes it faster than
srcu_read_{un,}lock_lite()
srcu_read_{un,}lock_fast() are intended to replace
rcu_read_{un,}lock_trace() if possible
RCU torture:
- Add get_torture_init_jiffies() to return the start time of the test
- Add a test_boost_holdoff module parameter to allow delaying
boosting tests when building rcutorture as built-in
- Add grace period sequence number logging at the beginning and end
of failure/close-call results
- Switch to hexadecimal for the expedited grace period sequence
number in the rcu_exp_grace_period trace point
- Make cur_ops->format_gp_seqs take buffer length
- Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool
- Complain when invalid SRCU reader_flavor is specified
- Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing, which forces SRCU
uses atomics even when percpu ops are NMI safe, and use the Kconfig
for SRCU lockdep testing
Misc:
- Split rcu_report_exp_cpu_mult() mask parameter and use for tracing
- Remove READ_ONCE() for rdp->gpwrap access in __note_gp_changes()
- Fix get_state_synchronize_rcu_full() GP-start detection
- Move RCU Tasks self-tests to core_initcall()
- Print segment lengths in show_rcu_nocb_gp_state()
- Make RCU watch ct_kernel_exit_state() warning
- Flush console log from kernel_power_off()
- rcutorture: Allow a negative value for nfakewriters
- rcu: Update TREE05.boot to test normal synchronize_rcu()
- rcu: Use _full() API to debug synchronize_rcu()
Make RCU handle PREEMPT_LAZY better:
- Fix header guard for rcu_all_qs()
- rcu: Rename PREEMPT_AUTO to PREEMPT_LAZY
- Update __cond_resched comment about RCU quiescent states
- Handle unstable rdp in rcu_read_unlock_strict()
- Handle quiescent states for PREEMPT_RCU=n, PREEMPT_COUNT=y
- osnoise: Provide quiescent states
- Adjust rcutorture with possible PREEMPT_RCU=n && PREEMPT_COUNT=y
combination
- Limit PREEMPT_RCU configurations
- Make rcutorture senario TREE07 and senario TREE10 use
PREEMPT_LAZY=y"
* tag 'rcu-next-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (59 commits)
rcutorture: Make scenario TREE07 build CONFIG_PREEMPT_LAZY=y
rcutorture: Make scenario TREE10 build CONFIG_PREEMPT_LAZY=y
rcu: limit PREEMPT_RCU configurations
rcutorture: Update ->extendables check for lazy preemption
rcutorture: Update rcutorture_one_extend_check() for lazy preemption
osnoise: provide quiescent states
rcu: Use _full() API to debug synchronize_rcu()
rcu: Update TREE05.boot to test normal synchronize_rcu()
rcutorture: Allow a negative value for nfakewriters
Flush console log from kernel_power_off()
context_tracking: Make RCU watch ct_kernel_exit_state() warning
rcu/nocb: Print segment lengths in show_rcu_nocb_gp_state()
rcu-tasks: Move RCU Tasks self-tests to core_initcall()
rcu: Fix get_state_synchronize_rcu_full() GP-start detection
torture: Make SRCU lockdep testing use srcu_read_lock_nmisafe()
srcu: Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing
rcutorture: Complain when invalid SRCU reader_flavor is specified
rcutorture: Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool
rcutorture: Make cur_ops->format_gp_seqs take buffer length
rcutorture: Add ftrace-compatible timestamp to GP# failure/close-call output
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Add mechanism to count and report internal events. This significantly
improves visibility on subtle corner conditions.
- The default idle CPU selection logic is revamped and improved in
multiple ways including being made topology aware.
- sched_ext was disabling ttwu_queue for simplicity, which can be
costly when hardware topology is more complex. Implement
SCX_OPS_ALLOWED_QUEUED_WAKEUP so that BPF schedulers can selectively
enable ttwu_queue.
- tools/sched_ext updates to improve compatibility among others.
- Other misc updates and fixes.
- sched_ext/for-6.14-fixes were pulled a few times to receive
prerequisite fixes and resolve conflicts.
* tag 'sched_ext-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (42 commits)
sched_ext: idle: Refactor scx_select_cpu_dfl()
sched_ext: idle: Honor idle flags in the built-in idle selection policy
sched_ext: Skip per-CPU tasks in scx_bpf_reenqueue_local()
sched_ext: Add trace point to track sched_ext core events
sched_ext: Change the event type from u64 to s64
sched_ext: Documentation: add task lifecycle summary
tools/sched_ext: Provide a compatible helper for scx_bpf_events()
selftests/sched_ext: Add NUMA-aware scheduler test
tools/sched_ext: Provide consistent access to scx flags
sched_ext: idle: Fix scx_bpf_pick_any_cpu_node() behavior
sched_ext: idle: Introduce scx_bpf_nr_node_ids()
sched_ext: idle: Introduce node-aware idle cpu kfunc helpers
sched_ext: idle: Per-node idle cpumasks
sched_ext: idle: Introduce SCX_OPS_BUILTIN_IDLE_PER_NODE
sched_ext: idle: Make idle static keys private
sched/topology: Introduce for_each_node_numadist() iterator
mm/numa: Introduce nearest_node_nodemask()
nodemask: numa: reorganize inclusion path
nodemask: add nodes_copy()
tools/sched_ext: Sync with scx repo
...
|
|
Add the following tracepoints:
* sched_entry(bool preempt, ip)
Called while entering __schedule
* sched_exit(bool is_switch, ip)
Called while exiting __schedule
* sched_set_state(task, curr_state, state)
Called when a task changes its state (to and from running)
These tracepoints are useful to describe the Linux task model and are
adapted from the patches by Daniel Bristot de Oliveira
(https://bristot.me/linux-task-model/).
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
All the big Linux distros enable CONFIG_SCHED_DEBUG, because
the various features it provides help not just with kernel
development, but with system administration and user-space
software development as well.
Reflect this reality and enable this functionality
unconditionally.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250317104257.3496611-4-mingo@kernel.org
|
|
With CONFIG_SCHED_DEBUG becoming unconditional, remove the
extra 'const_debug' indirection towards __read_mostly.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250317104257.3496611-3-mingo@kernel.org
|
|
The scheduler has this special SCHED_WARN() facility that
depends on CONFIG_SCHED_DEBUG.
Since CONFIG_SCHED_DEBUG is getting removed, convert
SCHED_WARN() to WARN_ON_ONCE().
Note that the warning output isn't 100% equivalent:
#define SCHED_WARN_ON(x) WARN_ONCE(x, #x)
Because SCHED_WARN_ON() would output the 'x' condition
as well, while WARN_ONCE() will only show a backtrace.
Hopefully these are rare enough to not really matter.
If it does, we should probably introduce a new WARN_ON()
variant that outputs the condition in stringified form,
or improve WARN_ON() itself.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250317104257.3496611-2-mingo@kernel.org
|
|
Rebuilding of root domains accounting information (total_bw) is
currently broken on some cases, e.g. suspend/resume on aarch64. Problem
is that the way we keep track of domain changes and try to add bandwidth
back is convoluted and fragile.
Fix it by simplify things by making sure bandwidth accounting is cleared
and completely restored after root domains changes (after root domains
are again stable).
To be sure we always call dl_rebuild_rd_accounting while holding
cpuset_mutex we also add cpuset_reset_sched_domains() wrapper.
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Co-developed-by: Waiman Long <llong@redhat.com>
Signed-off-by: Waiman Long <llong@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MRfeJKJUOyUSto@jlelli-thinkpadt14gen4.remote.csb
|
|
Create wrappers for sched_domains_mutex so that it can transparently be
used on both CONFIG_SMP and !CONFIG_SMP, as some function will need to
do.
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MP5Oq9RB8jBs3y@jlelli-thinkpadt14gen4.remote.csb
|
|
The individual architectures often add the preemption model to the begin
of the backtrace. This is the case on X86 or ARM64 for the "die" case
but not for regular warning. With the addition of DYNAMIC_PREEMPT for
PREEMPT_RT we end up with CONFIG_PREEMPT and CONFIG_PREEMPT_RT set
simultaneously. That means that everyone who tried to add that piece of
information gets it wrong for PREEMPT_RT because PREEMPT is checked
first.
Provide a generic function which returns the current scheduling model
considering LAZY preempt and the current state of PREEMPT_DYNAMIC.
The resulting strings are:
┏━━━━━━━━━━━┳━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━┓
┃ Model ┃ -RT -DYN ┃ +RT -DYN ┃ -RT +DYN ┃ +RT +DYN ┃
┡━━━━━━━━━━━╇━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━┩
│NONE │ NONE │ n/a │ PREEMPT(none) │ n/a │
├───────────┼──────────────┼───────────────────┼────────────────────┼───────────────────┤
│VOLUNTARY │ VOLUNTARY │ n/a │ PREEMPT(voluntary) │ n/a │
├───────────┼──────────────┼───────────────────┼────────────────────┼───────────────────┤
│FULL │ PREEMPT │ PREEMPT_RT │ PREEMPT(full) │ PREEMPT_{RT,full} │
├───────────┼──────────────┼───────────────────┼────────────────────┼───────────────────┤
│LAZY │ PREEMPT_LAZY │ PREEMPT_{RT,LAZY} │ PREEMPT(lazy) │ PREEMPT_{RT,lazy} │
└───────────┴──────────────┴───────────────────┴────────────────────┴───────────────────┘
[ The dynamic building of the string can lead to an empty string if the
function is invoked simultaneously on two CPUs. ]
Co-developed-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Co-developed-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Signed-off-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20250314160810.2373416-2-bigeasy@linutronix.de
|
|
This reverts commit eff6c8ce8d4d7faef75f66614dd20bb50595d261.
Hazem reported a 30% drop in UnixBench spawn test with commit
eff6c8ce8d4d ("sched/core: Reduce cost of sched_move_task when config
autogroup") on a m6g.xlarge AWS EC2 instance with 4 vCPUs and 16 GiB RAM
(aarch64) (single level MC sched domain):
https://lkml.kernel.org/r/20250205151026.13061-1-hagarhem@amazon.com
There is an early bail from sched_move_task() if p->sched_task_group is
equal to p's 'cpu cgroup' (sched_get_task_group()). E.g. both are
pointing to taskgroup '/user.slice/user-1000.slice/session-1.scope'
(Ubuntu '22.04.5 LTS').
So in:
do_exit()
sched_autogroup_exit_task()
sched_move_task()
if sched_get_task_group(p) == p->sched_task_group
return
/* p is enqueued */
dequeue_task() \
sched_change_group() |
task_change_group_fair() |
detach_task_cfs_rq() | (1)
set_task_rq() |
attach_task_cfs_rq() |
enqueue_task() /
(1) isn't called for p anymore.
Turns out that the regression is related to sgs->group_util in
group_is_overloaded() and group_has_capacity(). If (1) isn't called for
all the 'spawn' tasks then sgs->group_util is ~900 and
sgs->group_capacity = 1024 (single CPU sched domain) and this leads to
group_is_overloaded() returning true (2) and group_has_capacity() false
(3) much more often compared to the case when (1) is called.
I.e. there are much more cases of 'group_is_overloaded' and
'group_fully_busy' in WF_FORK wakeup sched_balance_find_dst_cpu() which
then returns much more often a CPU != smp_processor_id() (5).
This isn't good for these extremely short running tasks (FORK + EXIT)
and also involves calling sched_balance_find_dst_group_cpu() unnecessary
(single CPU sched domain).
Instead if (1) is called for 'p->flags & PF_EXITING' then the path
(4),(6) is taken much more often.
select_task_rq_fair(..., wake_flags = WF_FORK)
cpu = smp_processor_id()
new_cpu = sched_balance_find_dst_cpu(..., cpu, ...)
group = sched_balance_find_dst_group(..., cpu)
do {
update_sg_wakeup_stats()
sgs->group_type = group_classify()
if group_is_overloaded() (2)
return group_overloaded
if !group_has_capacity() (3)
return group_fully_busy
return group_has_spare (4)
} while group
if local_sgs.group_type > idlest_sgs.group_type
return idlest (5)
case group_has_spare:
if local_sgs.idle_cpus >= idlest_sgs.idle_cpus
return NULL (6)
Unixbench Tests './Run -c 4 spawn' on:
(a) VM AWS instance (m7gd.16xlarge) with v6.13 ('maxcpus=4 nr_cpus=4')
and Ubuntu 22.04.5 LTS (aarch64).
Shell & test run in '/user.slice/user-1000.slice/session-1.scope'.
w/o patch w/ patch
21005 27120
(b) i7-13700K with tip/sched/core ('nosmt maxcpus=8 nr_cpus=8') and
Ubuntu 22.04.5 LTS (x86_64).
Shell & test run in '/A'.
w/o patch w/ patch
67675 88806
CONFIG_SCHED_AUTOGROUP=y & /sys/proc/kernel/sched_autogroup_enabled equal
0 or 1.
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Hagar Hemdan <hagarhem@amazon.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250314151345.275739-1-dietmar.eggemann@arm.com
|
|
Repeat calls of static_branch_enable() to an already enabled
static key introduce overhead, because it calls cpus_read_lock().
Users may frequently set the uclamp value of tasks, triggering
the repeat enabling of the sched_uclamp_used static key.
Optimize this and avoid repeat calls to static_branch_enable()
by checking whether it's enabled already.
[ mingo: Rewrote the changelog for legibility ]
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250219093747.2612-2-xuewen.yan@unisoc.com
|
|
Don't open-code static_branch_unlikely(&sched_uclamp_used), we have
the uclamp_is_used() wrapper around it.
[ mingo: Clean up the changelog ]
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Hongyan Xia <hongyan.xia2@arm.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250219093747.2612-1-xuewen.yan@unisoc.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
David reported a warning observed while loop testing kexec jump:
Interrupts enabled after irqrouter_resume+0x0/0x50
WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220
kernel_kexec+0xf6/0x180
__do_sys_reboot+0x206/0x250
do_syscall_64+0x95/0x180
The corresponding interrupt flag trace:
hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90
hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90
That means __up_console_sem() was invoked with interrupts enabled. Further
instrumentation revealed that in the interrupt disabled section of kexec
jump one of the syscore_suspend() callbacks woke up a task, which set the
NEED_RESCHED flag. A later callback in the resume path invoked
cond_resched() which in turn led to the invocation of the scheduler:
__cond_resched+0x21/0x60
down_timeout+0x18/0x60
acpi_os_wait_semaphore+0x4c/0x80
acpi_ut_acquire_mutex+0x3d/0x100
acpi_ns_get_node+0x27/0x60
acpi_ns_evaluate+0x1cb/0x2d0
acpi_rs_set_srs_method_data+0x156/0x190
acpi_pci_link_set+0x11c/0x290
irqrouter_resume+0x54/0x60
syscore_resume+0x6a/0x200
kernel_kexec+0x145/0x1c0
__do_sys_reboot+0xeb/0x240
do_syscall_64+0x95/0x180
This is a long standing problem, which probably got more visible with
the recent printk changes. Something does a task wakeup and the
scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and
invokes schedule() from a completely bogus context. The scheduler
enables interrupts after context switching, which causes the above
warning at the end.
Quite some of the code paths in syscore_suspend()/resume() can result in
triggering a wakeup with the exactly same consequences. They might not
have done so yet, but as they share a lot of code with normal operations
it's just a question of time.
The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling
models. Full preemption is not affected as cond_resched() is disabled and
the preemption check preemptible() takes the interrupt disabled flag into
account.
Cure the problem by adding a corresponding check into cond_resched().
Reported-by: David Woodhouse <dwmw@amazon.co.uk>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/7717fe2ac0ce5f0a2c43fdab8b11f4483d54a2a4.camel@infradead.org
|
|
The header file stats.h is included twice. Remove the redundant include
and the following make includecheck warning:
stats.h is included more than once
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250219111756.3070-2-thorsten.blum@linux.dev
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/a55e849cba3c41b4c5708be6ea6be6f337d1a8fb.1738746821.git.namcao@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Clarify what happens when a task is woken up from the wake queue and
make clear its removal from that queue is atomic
* tag 'sched_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Clarify wake_up_q()'s write to task->wake_q.next
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix lock imbalance in a corner case of dispatch_to_local_dsq()
- Migration disabled tasks were confusing some BPF schedulers and its
handling had a bug. Fix it and simplify the default behavior by
dispatching them automatically
- ops.tick(), ops.disable() and ops.exit_task() were incorrectly
disallowing kfuncs that require the task argument to be the rq
operation is currently operating on and thus is rq-locked.
Allow them.
- Fix autogroup migration handling bug which was occasionally
triggering a warning in the cgroup migration path
- tools/sched_ext, selftest and other misc updates
* tag 'sched_ext-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use SCX_CALL_OP_TASK in task_tick_scx
sched_ext: Fix the incorrect bpf_list kfunc API in common.bpf.h.
sched_ext: selftests: Fix grammar in tests description
sched_ext: Fix incorrect assumption about migration disabled tasks in task_can_run_on_remote_rq()
sched_ext: Fix migration disabled handling in targeted dispatches
sched_ext: Implement auto local dispatching of migration disabled tasks
sched_ext: Fix incorrect time delta calculation in time_delta()
sched_ext: Fix lock imbalance in dispatch_to_local_dsq()
sched_ext: selftests/dsp_local_on: Fix selftest on UP systems
tools/sched_ext: Add helper to check task migration state
sched_ext: Fix incorrect autogroup migration detection
sched_ext: selftests/dsp_local_on: Fix sporadic failures
selftests/sched_ext: Fix enum resolution
sched_ext: Include task weight in the error state dump
sched_ext: Fixes typos in comments
|
|
A task wakeup can be either processed on the waker's CPU or bounced to the
wakee's previous CPU using an IPI (ttwu_queue). Bouncing to the wakee's CPU
avoids the waker's CPU locking and accessing the wakee's rq which can be
expensive across cache and node boundaries.
When ttwu_queue path is taken, select_task_rq() and thus ops.select_cpu()
may be skipped in some cases (racing against the wakee switching out). As
this confused some BPF schedulers, there wasn't a good way for a BPF
scheduler to tell whether idle CPU selection has been skipped, ops.enqueue()
couldn't insert tasks into foreign local DSQs, and the performance
difference on machines with simple toplogies were minimal, sched_ext
disabled ttwu_queue.
However, this optimization makes noticeable difference on more complex
topologies and a BPF scheduler now has an easy way tell whether
ops.select_cpu() was skipped since 9b671793c7d9 ("sched_ext, scx_qmap: Add
and use SCX_ENQ_CPU_SELECTED") and can insert tasks into foreign local DSQs
since 5b26f7b920f7 ("sched_ext: Allow SCX_DSQ_LOCAL_ON for direct
dispatches").
Implement SCX_OPS_ALLOW_QUEUED_WAKEUP which allows BPF schedulers to choose
to enable ttwu_queue optimization.
v2: Update the patch description and comment re. ops.select_cpu() being
skipped in some cases as opposed to always as per Neel.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Neel Natu <neelnatu@google.com>
Reported-by: Barret Rhoden <brho@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
|
|
Clarify that wake_up_q() does an atomic write to task->wake_q.next, after
which a concurrent __wake_q_add() can immediately overwrite
task->wake_q.next again.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250129-sched-wakeup-prettier-v1-1-2f51f5f663fa@google.com
|
|
Update comment in __cond_resched() clarifying how urgently needed
quiescent state are provided.
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit 78eb4ea25cd5 ("sysctl: treewide:
constify the ctl_table argument of proc_handlers") constified all the
proc_handlers.
Created this by running an spatch followed by a sed command:
Spatch:
virtual patch
@
depends on !(file in "net")
disable optional_qualifier
@
identifier table_name != {
watchdog_hardlockup_sysctl,
iwcm_ctl_table,
ucma_ctl_table,
memory_allocation_profiling_sysctls,
loadpin_sysctl_table
};
@@
+ const
struct ctl_table table_name [] = { ... };
sed:
sed --in-place \
-e "s/struct ctl_table .table = &uts_kern/const struct ctl_table *table = \&uts_kern/" \
kernel/utsname_sysctl.c
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for kernel/trace/
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Darrick J. Wong <djwong@kernel.org> # xfs
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
scx_move_task() is called from sched_move_task() and tells the BPF scheduler
that cgroup migration is being committed. sched_move_task() is used by both
cgroup and autogroup migrations and scx_move_task() tried to filter out
autogroup migrations by testing the destination cgroup and PF_EXITING but
this is not enough. In fact, without explicitly tagging the thread which is
doing the cgroup migration, there is no good way to tell apart
scx_move_task() invocations for racing migration to the root cgroup and an
autogroup migration.
This led to scx_move_task() incorrectly ignoring a migration from non-root
cgroup to an autogroup of the root cgroup triggering the following warning:
WARNING: CPU: 7 PID: 1 at kernel/sched/ext.c:3725 scx_cgroup_can_attach+0x196/0x340
...
Call Trace:
<TASK>
cgroup_migrate_execute+0x5b1/0x700
cgroup_attach_task+0x296/0x400
__cgroup_procs_write+0x128/0x140
cgroup_procs_write+0x17/0x30
kernfs_fop_write_iter+0x141/0x1f0
vfs_write+0x31d/0x4a0
__x64_sys_write+0x72/0xf0
do_syscall_64+0x82/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix it by adding an argument to sched_move_task() that indicates whether the
moving is for a cgroup or autogroup migration. After the change,
scx_move_task() is called only for cgroup migrations and renamed to
scx_cgroup_move_task().
Link: https://github.com/sched-ext/scx/issues/370
Fixes: 819513666966 ("sched_ext: Add cgroup support")
Cc: stable@vger.kernel.org # v6.12+
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes
the page allocator so we end up with the ability to allocate and
free zero-refcount pages. So that callers (ie, slab) can avoid a
refcount inc & dec
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to
use large folios other than PMD-sized ones
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance
and fixes for this small built-in kernel selftest
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part
of the mapletree code
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups
- "simplify split calculation" from Wei Yang provides a few fixes and
a test for the mapletree code
- "mm/vma: make more mmap logic userland testable" from Lorenzo
Stoakes continues the work of moving vma-related code into the
(relatively) new mm/vma.c
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the
page allocator
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue.
It should reduce the amount of unnecessary reading
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated:
https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/
Qi's series addresses this windup by synchronously freeing PTE
memory within the context of madvise(MADV_DONTNEED)
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests
code when optional compiler warnings are enabled
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from
David Hildenbrand tightens the allocator's observance of
__GFP_HARDWALL
- "pkeys kselftests improvements" from Kevin Brodsky implements
various fixes and cleanups in the MM selftests code, mainly
pertaining to the pkeys tests
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a
tmpfs-based kernel build was demonstrated
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of
zram_write_page(). A watchdog softlockup warning was eliminated
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin
Brodsky cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging
logic
- "Account page tables at all levels" from Kevin Brodsky cleans up
and regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accuracy
- "mm/damon: replace most damon_callback usages in sysfs with new
core functions" from SeongJae Park cleans up and generalizes
DAMON's sysfs file interface logic
- "mm/damon: enable page level properties based monitoring" from
SeongJae Park increases the amount of information which is
presented in response to DAMOS actions
- "mm/damon: remove DAMON debugfs interface" from SeongJae Park
removes DAMON's long-deprecated debugfs interfaces. Thus the
migration to sysfs is completed
- "mm/hugetlb: Refactor hugetlb allocation resv accounting" from
Peter Xu cleans up and generalizes the hugetlb reservation
accounting
- "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino
removes a never-used feature of the alloc_pages_bulk() interface
- "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park
extends DAMOS filters to support not only exclusion (rejecting),
but also inclusion (allowing) behavior
- "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi
introduces a new memory descriptor for zswap.zpool that currently
overlaps with struct page for now. This is part of the effort to
reduce the size of struct page and to enable dynamic allocation of
memory descriptors
- "mm, swap: rework of swap allocator locks" from Kairui Song redoes
and simplifies the swap allocator locking. A speedup of 400% was
demonstrated for one workload. As was a 35% reduction for kernel
build time with swap-on-zram
- "mm: update mips to use do_mmap(), make mmap_region() internal"
from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that
mmap_region() can be made MM-internal
- "mm/mglru: performance optimizations" from Yu Zhao fixes a few
MGLRU regressions and otherwise improves MGLRU performance
- "Docs/mm/damon: add tuning guide and misc updates" from SeongJae
Park updates DAMON documentation
- "Cleanup for memfd_create()" from Isaac Manjarres does that thing
- "mm: hugetlb+THP folio and migration cleanups" from David
Hildenbrand provides various cleanups in the areas of hugetlb
folios, THP folios and migration
- "Uncached buffered IO" from Jens Axboe implements the new
RWF_DONTCACHE flag which provides synchronous dropbehind for
pagecache reading and writing. To permite userspace to address
issues with massive buildup of useless pagecache when
reading/writing fast devices
- "selftests/mm: virtual_address_range: Reduce memory" from Thomas
Weißschuh fixes and optimizes some of the MM selftests"
* tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm/compaction: fix UBSAN shift-out-of-bounds warning
s390/mm: add missing ctor/dtor on page table upgrade
kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags()
tools: add VM_WARN_ON_VMG definition
mm/damon/core: use str_high_low() helper in damos_wmark_wait_us()
seqlock: add missing parameter documentation for raw_seqcount_try_begin()
mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh
mm/page_alloc: remove the incorrect and misleading comment
zram: remove zcomp_stream_put() from write_incompressible_page()
mm: separate move/undo parts from migrate_pages_batch()
mm/kfence: use str_write_read() helper in get_access_type()
selftests/mm/mkdirty: fix memory leak in test_uffdio_copy()
kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags()
selftests/mm: virtual_address_range: avoid reading from VM_IO mappings
selftests/mm: vm_util: split up /proc/self/smaps parsing
selftests/mm: virtual_address_range: unmap chunks after validation
selftests/mm: virtual_address_range: mmap() without PROT_WRITE
selftests/memfd/memfd_test: fix possible NULL pointer dereference
mm: add FGP_DONTCACHE folio creation flag
mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly individually changelogged singleton patches. The patch series
in this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap
library code
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms
some cleanup and Rust preparation in the xarray library code
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven
fixes pathnames in some code comments
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses
the new secs_to_jiffies() in various places where that is
appropriate
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API
- "Convert ocfs2 to use folios" from Matthew Wilcox does that
- "Remove get_task_comm() and print task comm directly" from Yafang
Shao removes now-unneeded calls to get_task_comm() in various
places
- "squashfs: reduce memory usage and update docs" from Phillip
Lougher implements some memory savings in squashfs and performs
some maintainability work
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented
with a corrupted image
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger
- "minmax.h: Cleanups and minor optimisations" from David Laight does
some maintenance work on the min/max library code
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance
work on the xarray library code"
* tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits)
ocfs2: use str_yes_no() and str_no_yes() helper functions
include/linux/lz4.h: add some missing macros
Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent
Xarray: remove repeat check in xas_squash_marks()
Xarray: distinguish large entries correctly in xas_split_alloc()
Xarray: move forward index correctly in xas_pause()
Xarray: do not return sibling entries from xas_find_marked()
ipc/util.c: complete the kernel-doc function descriptions
gcov: clang: use correct function param names
latencytop: use correct kernel-doc format for func params
minmax.h: remove some #defines that are only expanded once
minmax.h: simplify the variants of clamp()
minmax.h: move all the clamp() definitions after the min/max() ones
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
minmax.h: reduce the #define expansion of min(), max() and clamp()
minmax.h: update some comments
minmax.h: add whitespace around operators and after commas
nilfs2: do not update mtime of renamed directory that is not moved
nilfs2: handle errors that nilfs_prepare_chunk() may return
CREDITS: fix spelling mistake
...
|
|
Resending this patch as I haven't received feedback on my initial
submission https://lore.kernel.org/all/20241204182953.10854-1-oxana@cloudflare.com/
For the processes which are terminated abnormally the kernel can provide
a coredump if enabled. When the coredump is performed, the process and
all its threads are put into the D state
(TASK_UNINTERRUPTIBLE | TASK_FREEZABLE).
On the other hand, we have kernel thread khungtaskd which monitors the
processes in the D state. If the task stuck in the D state more than
kernel.hung_task_timeout_secs, the hung_task alert appears in the kernel
log.
The higher memory usage of a process, the longer it takes to create
coredump, the longer tasks are in the D state. We have hung_task alerts
for the processes with memory usage above 10Gb. Although, our
kernel.hung_task_timeout_secs is 10 sec when the default is 120 sec.
Adding additional information to the log that the task is blocked by
coredump will help with monitoring. Another approach might be to
completely filter out alerts for such tasks, but in that case we would
lose transparency about what is putting pressure on some system
resources, e.g. we saw an increase in I/O when coredump occurs due its
writing to disk.
Additionally, it would be helpful to have task_struct->flags in the log
from the function sched_show_task(). Currently it prints
task_struct->thread_info->flags, this seems misleading as the line
starts with "task:xxxx".
[akpm@linux-foundation.org: fix printk control string]
Link: https://lkml.kernel.org/r/20250110160328.64947-1-oxana@cloudflare.com
Signed-off-by: Oxana Kharitonova <oxana@cloudflare.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ben Segall <bsegall@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- scx_bpf_now() added so that BPF scheduler can access the cached
timestamp in struct rq to avoid reading TSC multiple times within a
locked scheduling operation.
- Minor updates to the built-in idle CPU selection logic.
- tool/sched_ext updates and other misc changes.
* tag 'sched_ext-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: fix kernel-doc warnings
sched_ext: Use time helpers in BPF schedulers
sched_ext: Replace bpf_ktime_get_ns() to scx_bpf_now()
sched_ext: Add time helpers for BPF schedulers
sched_ext: Add scx_bpf_now() for BPF scheduler
sched_ext: Implement scx_bpf_now()
sched_ext: Relocate scx_enabled() related code
sched_ext: Add option -l in selftest runner to list all available tests
sched_ext: Include remaining task time slice in error state dump
sched_ext: update scx_bpf_dsq_insert() doc for SCX_DSQ_LOCAL_ON
sched_ext: idle: small CPU iteration refactoring
sched_ext: idle: introduce check_builtin_idle_enabled() helper
sched_ext: idle: clarify comments
sched_ext: idle: use assign_cpu() to update the idle cpumask
sched_ext: Use str_enabled_disabled() helper in update_selcpu_topology()
sched_ext: Use sizeof_field for key_len in dsq_hash_params
tools/sched_ext: Receive updates from SCX repo
sched_ext: Use the NUMA scheduling domain for NUMA optimizations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"Kthreads affinity follow either of 4 existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never
execute relevant code on any other CPU. This is currently handled
by smpboot code which takes care of CPU-hotplug operations.
Affinity here is a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and
can't run anywhere else. The affinity is set through
kthread_bind_mask() and the subsystem takes care by itself to
handle CPU-hotplug operations. Affinity here is assumed to be a
correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node.
This is not a correctness constraint but merely a preference in
terms of memory locality. kswapd and kcompactd both fall into this
category. The affinity is set manually like for any other task and
CPU-hotplug is supposed to be handled by the relevant subsystem so
that the task is properly reaffined whenever a given CPU from the
node comes up. Also care should be taken so that the node affinity
doesn't cross isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its
own ad-hoc way.
This is an infrastructure proposal to handle this with the following
API changes:
- kthread_create_on_node() automatically affines the created kthread
to its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called
right after kthread_create_on_node() to specify a preferred
affinity different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine to
the housekeeping CPUs (which means to all online CPUs most of the time
or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
- Consolidate a bunch of ad-hoc implementations of
kthread_run_on_cpu()
- Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
- Add some correctness check to ensure kthread_bind() is always
called before the first kthread wake up.
- Default affine kthread to its preferred node.
- Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
- Implement kthreads preferred affinity
- Unify kthread worker and kthread API's style
- Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation"
* tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: modify kernel-doc function name to match code
rcu: Use kthread preferred affinity for RCU exp kworkers
treewide: Introduce kthread_run_worker[_on_cpu]()
kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format
rcu: Use kthread preferred affinity for RCU boost
kthread: Implement preferred affinity
mm: Create/affine kswapd to its preferred node
mm: Create/affine kcompactd to its preferred node
kthread: Default affine kthread to its preferred NUMA node
kthread: Make sure kthread hasn't started while binding it
sched,arm64: Handle CPU isolation on last resort fallback rq selection
arm64: Exclude nohz_full CPUs from 32bits el0 support
lib: test_objpool: Use kthread_run_on_cpu()
kallsyms: Use kthread_run_on_cpu()
soc/qman: test: Use kthread_run_on_cpu()
arm/bL_switcher: Use kthread_run_on_cpu()
|
|
CPU unplug first calls __cpu_disable(), and that's where powerpc calls
cleanup_cpu_mmu_context(), which clears this CPU from mm_cpumask() of all
mms in the system.
However this CPU may still be using a lazy tlb mm, and its mm_cpumask bit
will be cleared from it. The CPU does not switch away from the lazy tlb
mm until arch_cpu_idle_dead() calls idle_task_exit().
If that user mm exits in this window, it will not be subject to the lazy
tlb mm shootdown and may be freed while in use as a lazy mm by the CPU
that is being unplugged.
cleanup_cpu_mmu_context() could be moved later, but it looks better to
move the lazy tlb mm switching earlier. The problem with doing the lazy
mm switching in idle_task_exit() is explained in commit bf2c59fce4074
("sched/core: Fix illegal RCU from offline CPUs"), which added a wart to
switch away from the mm but leave it set in active_mm to be cleaned up
later.
So instead, switch away from the lazy tlb mm at sched_cpu_wait_empty(),
which is the last hotplug state before teardown
(CPUHP_AP_SCHED_WAIT_EMPTY). This CPU will never switch to a user thread
from this point, so it has no chance to pick up a new lazy tlb mm. This
removes the lazy tlb mm handling wart in CPU unplug.
With this, idle_task_exit() is not needed anymore and can be cleaned up.
This leaves the prototype alone, to be cleaned after this change.
herton: took the suggestions from https://lore.kernel.org/all/87jzvyprsw.ffs@tglx/
and made adjustments on the initial patch proposed by Nicholas.
Link: https://lkml.kernel.org/r/20230524060455.147699-1-npiggin@gmail.com
Link: https://lore.kernel.org/all/20230525205253.E2FAEC433EF@smtp.kernel.org/
Link: https://lkml.kernel.org/r/20241104142318.3295663-1-herton@redhat.com
Fixes: 2655421ae69f ("lazy tlb: shoot lazies, non-refcounting lazy tlb mm reference handling scheme")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kasan_record_aux_stack_noalloc() was introduced to record a stack trace
without allocating memory in the process. It has been added to callers
which were invoked while a raw_spinlock_t was held. More and more callers
were identified and changed over time. Is it a good thing to have this
while functions try their best to do a locklessly setup? The only
downside of having kasan_record_aux_stack() not allocate any memory is
that we end up without a stacktrace if stackdepot runs out of memory and
at the same stacktrace was not recorded before To quote Marco Elver from
https://lore.kernel.org/all/CANpmjNPmQYJ7pv1N3cuU8cP18u7PP_uoZD8YxwZd4jtbof9nVQ@mail.gmail.com/
| I'd be in favor, it simplifies things. And stack depot should be
| able to replenish its pool sufficiently in the "non-aux" cases
| i.e. regular allocations. Worst case we fail to record some
| aux stacks, but I think that's only really bad if there's a bug
| around one of these allocations. In general the probabilities
| of this being a regression are extremely small [...]
Make the kasan_record_aux_stack_noalloc() behaviour default as
kasan_record_aux_stack().
[bigeasy@linutronix.de: dressed the diff as patch]
Link: https://lkml.kernel.org/r/20241122155451.Mb2pmeyJ@linutronix.de
Fixes: 7cb3007ce2da ("kasan: generic: introduce kasan_record_aux_stack_noalloc()")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: syzbot+39f85d612b7c20d8db48@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67275485.050a0220.3c8d68.0a37.GAE@google.com
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Ben Segall <bsegall@google.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: syzkaller-bugs@googlegroups.com
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When running hackbench in a cgroup with bandwidth throttling enabled,
following PSI splat was observed:
psi: inconsistent task state! task=1831:hackbench cpu=8 psi_flags=14 clear=0 set=4
When investigating the series of events leading up to the splat,
following sequence was observed:
[008] d..2.: sched_switch: ... ==> next_comm=hackbench next_pid=1831 next_prio=120
...
[008] dN.2.: dequeue_entity(task delayed): task=hackbench pid=1831 cfs_rq->throttled=0
[008] dN.2.: pick_task_fair: check_cfs_rq_runtime() throttled cfs_rq on CPU8
# CPU8 goes into newidle balance and releases the rq lock
...
# CPU15 on same LLC Domain is trying to wakeup hackbench(pid=1831)
[015] d..4.: psi_flags_change: psi: task state: task=1831:hackbench cpu=8 psi_flags=14 clear=0 set=4 final=14 # Splat (cfs_rq->throttled=1)
[015] d..4.: sched_wakeup: comm=hackbench pid=1831 prio=120 target_cpu=008 # Task has woken on a throttled hierarchy
[008] d..2.: sched_switch: prev_comm=hackbench prev_pid=1831 prev_prio=120 prev_state=S ==> ...
psi_dequeue() relies on psi_sched_switch() to set the correct PSI flags
for the blocked entity, however, with the introduction of DELAY_DEQUEUE,
the block task can wakeup when newidle balance drops the runqueue lock
during __schedule().
If a task wakes before psi_sched_switch() adjusts the PSI flags, skip
any modifications in psi_enqueue() which would still see the flags of a
running task and not a blocked one. Instead, rely on psi_sched_switch()
to do the right thing.
Since the status returned by try_to_block_task() may no longer be true
by the time schedule reaches psi_sched_switch(), check if the task is
blocked or not using a combination of task_on_rq_queued() and
p->se.sched_delayed checks.
[ prateek: Commit message, testing, early bailout in psi_enqueue() ]
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue") # 1a6151017ee5
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Link: https://lore.kernel.org/r/20241227061941.2315-1-kprateek.nayak@amd.com
|
|
sched_clock_irqtime may be disabled due to the clock source, in which case
IRQ time should not be accounted. Let's add a conditional check to avoid
unnecessary logic.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250103022409.2544-3-laoar.shao@gmail.com
|
|
Returns a high-performance monotonically non-decreasing clock for the current
CPU. The clock returned is in nanoseconds.
It provides the following properties:
1) High performance: Many BPF schedulers call bpf_ktime_get_ns() frequently
to account for execution time and track tasks' runtime properties.
Unfortunately, in some hardware platforms, bpf_ktime_get_ns() -- which
eventually reads a hardware timestamp counter -- is neither performant nor
scalable. scx_bpf_now() aims to provide a high-performance clock by
using the rq clock in the scheduler core whenever possible.
2) High enough resolution for the BPF scheduler use cases: In most BPF
scheduler use cases, the required clock resolution is lower than the most
accurate hardware clock (e.g., rdtsc in x86). scx_bpf_now() basically
uses the rq clock in the scheduler core whenever it is valid. It considers
that the rq clock is valid from the time the rq clock is updated
(update_rq_clock) until the rq is unlocked (rq_unpin_lock).
3) Monotonically non-decreasing clock for the same CPU: scx_bpf_now()
guarantees the clock never goes backward when comparing them in the same
CPU. On the other hand, when comparing clocks in different CPUs, there
is no such guarantee -- the clock can go backward. It provides a
monotonically *non-decreasing* clock so that it would provide the same
clock values in two different scx_bpf_now() calls in the same CPU
during the same period of when the rq clock is valid.
An rq clock becomes valid when it is updated using update_rq_clock()
and invalidated when the rq is unlocked using rq_unpin_lock().
Let's suppose the following timeline in the scheduler core:
T1. rq_lock(rq)
T2. update_rq_clock(rq)
T3. a sched_ext BPF operation
T4. rq_unlock(rq)
T5. a sched_ext BPF operation
T6. rq_lock(rq)
T7. update_rq_clock(rq)
For [T2, T4), we consider that rq clock is valid (SCX_RQ_CLK_VALID is
set), so scx_bpf_now() calls during [T2, T4) (including T3) will
return the rq clock updated at T2. For duration [T4, T7), when a BPF
scheduler can still call scx_bpf_now() (T5), we consider the rq clock
is invalid (SCX_RQ_CLK_VALID is unset at T4). So when calling
scx_bpf_now() at T5, we will return a fresh clock value by calling
sched_clock_cpu() internally. Also, to prevent getting outdated rq clocks
from a previous scx scheduler, invalidate all the rq clocks when unloading
a BPF scheduler.
One example of calling scx_bpf_now(), when the rq clock is invalid
(like T5), is in scx_central [1]. The scx_central scheduler uses a BPF
timer for preemptive scheduling. In every msec, the timer callback checks
if the currently running tasks exceed their timeslice. At the beginning of
the BPF timer callback (central_timerfn in scx_central.bpf.c), scx_central
gets the current time. When the BPF timer callback runs, the rq clock could
be invalid, the same as T5. In this case, scx_bpf_now() returns a fresh
clock value rather than returning the old one (T2).
[1] https://github.com/sched-ext/scx/blob/main/scheds/c/scx_central.bpf.c
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
When a kthread or any other task has an affinity mask that is fully
offline or unallowed, the scheduler reaffines the task to all possible
CPUs as a last resort.
This default decision doesn't mix up very well with nohz_full CPUs that
are part of the possible cpumask but don't want to be disturbed by
unbound kthreads or even detached pinned user tasks.
Make the fallback affinity setting aware of nohz_full.
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
With delayed dequeued feature, a sleeping sched_entity remains queued
in the rq until its lag has elapsed but can't run.
Rename h_nr_running into h_nr_queued to reflect this new behavior.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-4-vincent.guittot@linaro.org
|
|
Sync with urgent bits as a base for further work.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
We can't stop the tick of a rq if there are at least 2 tasks enqueued in
the whole hierarchy and not only at the root cfs rq.
rq->cfs.nr_running tracks the number of sched_entity at one level
whereas rq->cfs.h_nr_running tracks all queued tasks in the
hierarchy.
Fixes: 11cc374f4643b ("sched_ext: Simplify scx_can_stop_tick() invocation in sched_can_stop_tick()")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-2-vincent.guittot@linaro.org
|
|
As all the non-domain and non-managed_irq housekeeping types have been
unified to HK_TYPE_KERNEL_NOISE, replace all these references in the
scheduler to use HK_TYPE_KERNEL_NOISE.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20241030175253.125248-5-longman@redhat.com
|
|
Currently we check for bandwidth overflow potentially due to hotplug
operations at the end of sched_cpu_deactivate(), after the cpu going
offline has already been removed from scheduling, active_mask, etc.
This can create issues for DEADLINE tasks, as there is a substantial
race window between the start of sched_cpu_deactivate() and the moment
we possibly decide to roll-back the operation if dl_bw_deactivate()
returns failure in cpuset_cpu_inactive(). An example is a throttled
task that sees its replenishment timer firing while the cpu it was
previously running on is considered offline, but before
dl_bw_deactivate() had a chance to say no and roll-back happened.
Fix this by directly calling dl_bw_deactivate() first thing in
sched_cpu_deactivate() and do the required calculation in the former
function considering the cpu passed as an argument as offline already.
By doing so we also simplify sched_cpu_deactivate(), as there is no need
anymore for any kind of roll-back if we fail early.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Tested-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/Zzc1DfPhbvqDDIJR@jlelli-thinkpadt14gen4.remote.csb
|
|
For hotplug operations, DEADLINE needs to check that there is still enough
bandwidth left after removing the CPU that is going offline. We however
fail to do so currently.
Restore the correct behavior by restructuring dl_bw_manage() a bit, so
that overflow conditions (not enough bandwidth left) are properly
checked. Also account for dl_server bandwidth, i.e. discount such
bandwidth in the calculation since NORMAL tasks will be anyway moved
away from the CPU as a result of the hotplug operation.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Tested-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20241114142810.794657-3-juri.lelli@redhat.com
|
|
When steal time exceeds the measured delta when updating clock_task, we
currently try to catch up the excess in future updates.
However, this results in inaccurate run times for the future things using
clock_task, in some situations, as they end up getting additional steal
time that did not actually happen.
This is because there is a window between reading the elapsed time in
update_rq_clock() and sampling the steal time in update_rq_clock_task().
If the VCPU gets preempted between those two points, any additional
steal time is accounted to the outgoing task even though the calculated
delta did not actually contain any of that "stolen" time.
When this race happens, we can end up with steal time that exceeds the
calculated delta, and the previous code would try to catch up that excess
steal time in future clock updates, which is given to the next,
incoming task, even though it did not actually have any time stolen.
This behavior is particularly bad when steal time can be very long,
which we've seen when trying to extend steal time to contain the duration
that the host was suspended [0]. When this happens, clock_task stays
frozen, during which the running task stays running for the whole
duration, since its run time doesn't increase.
However the race can happen even under normal operation.
Ideally we would read the elapsed cpu time and the steal time atomically,
to prevent this race from happening in the first place, but doing so
is non-trivial.
Since the time between those two points isn't otherwise accounted anywhere,
neither to the outgoing task nor the incoming task (because the "end of
outgoing task" and "start of incoming task" timestamps are the same),
I would argue that the right thing to do is to simply drop any excess steal
time, in order to prevent these issues.
[0] https://lore.kernel.org/kvm/20240820043543.837914-1-suleiman@google.com/
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241118043745.1857272-1-suleiman@google.com
|
|
Scheduler raises a SCHED_SOFTIRQ to trigger a load balancing event on
from the IPI handler on the idle CPU. If the SMP function is invoked
from an idle CPU via flush_smp_call_function_queue() then the HARD-IRQ
flag is not set and raise_softirq_irqoff() needlessly wakes ksoftirqd
because soft interrupts are handled before ksoftirqd get on the CPU.
Adding a trace_printk() in nohz_csd_func() at the spot of raising
SCHED_SOFTIRQ and enabling trace events for sched_switch, sched_wakeup,
and softirq_entry (for SCHED_SOFTIRQ vector alone) helps observing the
current behavior:
<idle>-0 [000] dN.1.: nohz_csd_func: Raising SCHED_SOFTIRQ from nohz_csd_func
<idle>-0 [000] dN.4.: sched_wakeup: comm=ksoftirqd/0 pid=16 prio=120 target_cpu=000
<idle>-0 [000] .Ns1.: softirq_entry: vec=7 [action=SCHED]
<idle>-0 [000] .Ns1.: softirq_exit: vec=7 [action=SCHED]
<idle>-0 [000] d..2.: sched_switch: prev_comm=swapper/0 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=ksoftirqd/0 next_pid=16 next_prio=120
ksoftirqd/0-16 [000] d..2.: sched_switch: prev_comm=ksoftirqd/0 prev_pid=16 prev_prio=120 prev_state=S ==> next_comm=swapper/0 next_pid=0 next_prio=120
...
Use __raise_softirq_irqoff() to raise the softirq. The SMP function call
is always invoked on the requested CPU in an interrupt handler. It is
guaranteed that soft interrupts are handled at the end.
Following are the observations with the changes when enabling the same
set of events:
<idle>-0 [000] dN.1.: nohz_csd_func: Raising SCHED_SOFTIRQ for nohz_idle_balance
<idle>-0 [000] dN.1.: softirq_raise: vec=7 [action=SCHED]
<idle>-0 [000] .Ns1.: softirq_entry: vec=7 [action=SCHED]
No unnecessary ksoftirqd wakeups are seen from idle task's context to
service the softirq.
Fixes: b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
Closes: https://lore.kernel.org/lkml/fcf823f-195e-6c9a-eac3-25f870cb35ac@inria.fr/ [1]
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20241119054432.6405-5-kprateek.nayak@amd.com
|
|
The need_resched() check currently in nohz_csd_func() can be tracked
to have been added in scheduler_ipi() back in 2011 via commit
ca38062e57e9 ("sched: Use resched IPI to kick off the nohz idle balance")
Since then, it has travelled quite a bit but it seems like an idle_cpu()
check currently is sufficient to detect the need to bail out from an
idle load balancing. To justify this removal, consider all the following
case where an idle load balancing could race with a task wakeup:
o Since commit f3dd3f674555b ("sched: Remove the limitation of WF_ON_CPU
on wakelist if wakee cpu is idle") a target perceived to be idle
(target_rq->nr_running == 0) will return true for
ttwu_queue_cond(target) which will offload the task wakeup to the idle
target via an IPI.
In all such cases target_rq->ttwu_pending will be set to 1 before
queuing the wake function.
If an idle load balance races here, following scenarios are possible:
- The CPU is not in TIF_POLLING_NRFLAG mode in which case an actual
IPI is sent to the CPU to wake it out of idle. If the
nohz_csd_func() queues before sched_ttwu_pending(), the idle load
balance will bail out since idle_cpu(target) returns 0 since
target_rq->ttwu_pending is 1. If the nohz_csd_func() is queued after
sched_ttwu_pending() it should see rq->nr_running to be non-zero and
bail out of idle load balancing.
- The CPU is in TIF_POLLING_NRFLAG mode and instead of an actual IPI,
the sender will simply set TIF_NEED_RESCHED for the target to put it
out of idle and flush_smp_call_function_queue() in do_idle() will
execute the call function. Depending on the ordering of the queuing
of nohz_csd_func() and sched_ttwu_pending(), the idle_cpu() check in
nohz_csd_func() should either see target_rq->ttwu_pending = 1 or
target_rq->nr_running to be non-zero if there is a genuine task
wakeup racing with the idle load balance kick.
o The waker CPU perceives the target CPU to be busy
(targer_rq->nr_running != 0) but the CPU is in fact going idle and due
to a series of unfortunate events, the system reaches a case where the
waker CPU decides to perform the wakeup by itself in ttwu_queue() on
the target CPU but target is concurrently selected for idle load
balance (XXX: Can this happen? I'm not sure, but we'll consider the
mother of all coincidences to estimate the worst case scenario).
ttwu_do_activate() calls enqueue_task() which would increment
"rq->nr_running" post which it calls wakeup_preempt() which is
responsible for setting TIF_NEED_RESCHED (via a resched IPI or by
setting TIF_NEED_RESCHED on a TIF_POLLING_NRFLAG idle CPU) The key
thing to note in this case is that rq->nr_running is already non-zero
in case of a wakeup before TIF_NEED_RESCHED is set which would
lead to idle_cpu() check returning false.
In all cases, it seems that need_resched() check is unnecessary when
checking for idle_cpu() first since an impending wakeup racing with idle
load balancer will either set the "rq->ttwu_pending" or indicate a newly
woken task via "rq->nr_running".
Chasing the reason why this check might have existed in the first place,
I came across Peter's suggestion on the fist iteration of Suresh's
patch from 2011 [1] where the condition to raise the SCHED_SOFTIRQ was:
sched_ttwu_do_pending(list);
if (unlikely((rq->idle == current) &&
rq->nohz_balance_kick &&
!need_resched()))
raise_softirq_irqoff(SCHED_SOFTIRQ);
Since the condition to raise the SCHED_SOFIRQ was preceded by
sched_ttwu_do_pending() (which is equivalent of sched_ttwu_pending()) in
the current upstream kernel, the need_resched() check was necessary to
catch a newly queued task. Peter suggested modifying it to:
if (idle_cpu() && rq->nohz_balance_kick && !need_resched())
raise_softirq_irqoff(SCHED_SOFTIRQ);
where idle_cpu() seems to have replaced "rq->idle == current" check.
Even back then, the idle_cpu() check would have been sufficient to catch
a new task being enqueued. Since commit b2a02fc43a1f ("smp: Optimize
send_call_function_single_ipi()") overloads the interpretation of
TIF_NEED_RESCHED for TIF_POLLING_NRFLAG idling, remove the
need_resched() check in nohz_csd_func() to raise SCHED_SOFTIRQ based
on Peter's suggestion.
Fixes: b2a02fc43a1f ("smp: Optimize send_call_function_single_ipi()")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119054432.6405-3-kprateek.nayak@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core facilities:
- Add the "Lazy preemption" model (CONFIG_PREEMPT_LAZY=y), which
optimizes fair-class preemption by delaying preemption requests to
the tick boundary, while working as full preemption for
RR/FIFO/DEADLINE classes. (Peter Zijlstra)
- x86: Enable Lazy preemption (Peter Zijlstra)
- riscv: Enable Lazy preemption (Jisheng Zhang)
- Initialize idle tasks only once (Thomas Gleixner)
- sched/ext: Remove sched_fork() hack (Thomas Gleixner)
Fair scheduler:
- Optimize the PLACE_LAG when se->vlag is zero (Huang Shijie)
Idle loop:
- Optimize the generic idle loop by removing unnecessary memory
barrier (Zhongqiu Han)
RSEQ:
- Improve cache locality of RSEQ concurrency IDs for intermittent
workloads (Mathieu Desnoyers)
Waitqueues:
- Make wake_up_{bit,var} less fragile (Neil Brown)
PSI:
- Pass enqueue/dequeue flags to psi callbacks directly (Johannes
Weiner)
Preparatory patches for proxy execution:
- Add move_queued_task_locked helper (Connor O'Brien)
- Consolidate pick_*_task to task_is_pushable helper (Connor O'Brien)
- Split out __schedule() deactivate task logic into a helper (John
Stultz)
- Split scheduler and execution contexts (Peter Zijlstra)
- Make mutex::wait_lock irq safe (Juri Lelli)
- Expose __mutex_owner() (Juri Lelli)
- Remove wakeups from under mutex::wait_lock (Peter Zijlstra)
Misc fixes and cleanups:
- Remove unused __HAVE_THREAD_FUNCTIONS hook support (David
Disseldorp)
- Update the comment for TIF_NEED_RESCHED_LAZY (Sebastian Andrzej
Siewior)
- Remove unused bit_wait_io_timeout (Dr. David Alan Gilbert)
- remove the DOUBLE_TICK feature (Huang Shijie)
- fix the comment for PREEMPT_SHORT (Huang Shijie)
- Fix unnused variable warning (Christian Loehle)
- No PREEMPT_RT=y for all{yes,mod}config"
* tag 'sched-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
sched, x86: Update the comment for TIF_NEED_RESCHED_LAZY.
sched: No PREEMPT_RT=y for all{yes,mod}config
riscv: add PREEMPT_LAZY support
sched, x86: Enable Lazy preemption
sched: Enable PREEMPT_DYNAMIC for PREEMPT_RT
sched: Add Lazy preemption model
sched: Add TIF_NEED_RESCHED_LAZY infrastructure
sched/ext: Remove sched_fork() hack
sched: Initialize idle tasks only once
sched: psi: pass enqueue/dequeue flags to psi callbacks directly
sched/uclamp: Fix unnused variable warning
sched: Split scheduler and execution contexts
sched: Split out __schedule() deactivate task logic into a helper
sched: Consolidate pick_*_task to task_is_pushable helper
sched: Add move_queued_task_locked helper
locking/mutex: Expose __mutex_owner()
locking/mutex: Make mutex::wait_lock irq safe
locking/mutex: Remove wakeups from under mutex::wait_lock
sched: Improve cache locality of RSEQ concurrency IDs for intermittent workloads
sched: idle: Optimize the generic idle loop by removing needless memory barrier
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- The fair sched class currently has a bug where its balance() returns
true telling the sched core that it has tasks to run but then NULL
from pick_task(). This makes sched core call sched_ext's pick_task()
without preceding balance() which can lead to stalls in partial mode.
For now, work around by detecting the condition and forcing the CPU
to go through another scheduling cycle.
- Add a missing newline to an error message and fix drgn introspection
tool which went out of sync.
* tag 'sched_ext-for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()
sched_ext: Update scx_show_state.py to match scx_ops_bypass_depth's new type
sched_ext: Add a missing newline at the end of an error message
|
|
balance_scx()
sched_ext dispatches tasks from the BPF scheduler from balance_scx() and
thus every pick_task_scx() call must be preceded by balance_scx(). While
this usually holds, due to a bug, there are cases where the fair class's
balance() returns true indicating that it has tasks to run on the CPU and
thus terminating balance() calls but fails to actually find the next task to
run when pick_task() is called. In such cases, pick_task_scx() can be called
without preceding balance_scx().
Detect this condition using SCX_RQ_BAL_PENDING flags. If detected, keep
running the previous task if possible and avoid stalling from entering idle
without balancing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/Ztj_h5c2LYsdXYbA@slm.duckdns.org
|
