summaryrefslogtreecommitdiff
path: root/kernel/sched/topology.c
AgeCommit message (Collapse)Author
2024-02-28sched/topology: Rename SD_SHARE_PKG_RESOURCES to SD_SHARE_LLCAlex Shi
SD_SHARE_PKG_RESOURCES is a bit of a misnomer: its naming suggests that it's sharing all 'package resources' - while in reality it's specifically for sharing the LLC only. Rename it to SD_SHARE_LLC to reduce confusion. [ mingo: Rewrote the confusing changelog as well. ] Suggested-by: Valentin Schneider <vschneid@redhat.com> Signed-off-by: Alex Shi <alexs@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Valentin Schneider <vschneid@redhat.com> Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Reviewed-by: Barry Song <baohua@kernel.org> Link: https://lore.kernel.org/r/20240210113924.1130448-5-alexs@kernel.org
2024-02-28sched/topology: Remove duplicate descriptions from TOPOLOGY_SD_FLAGSAlex Shi
These flags are already documented in include/linux/sched/sd_flags.h. Also, add missing SD_CLUSTER and keep the comment on SD_ASYM_PACKING as it is a special case. Suggested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Alex Shi <alexs@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Reviewed-by: Valentin Schneider <vschneid@redhat.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/20240210113924.1130448-1-alexs@kernel.org
2023-10-24sched/fair: Scan cluster before scanning LLC in wake-up pathBarry Song
For platforms having clusters like Kunpeng920, CPUs within the same cluster have lower latency when synchronizing and accessing shared resources like cache. Thus, this patch tries to find an idle cpu within the cluster of the target CPU before scanning the whole LLC to gain lower latency. This will be implemented in 2 steps in select_idle_sibling(): 1. When the prev_cpu/recent_used_cpu are good wakeup candidates, use them if they're sharing cluster with the target CPU. Otherwise trying to scan for an idle CPU in the target's cluster. 2. Scanning the cluster prior to the LLC of the target CPU for an idle CPU to wakeup. Testing has been done on Kunpeng920 by pinning tasks to one numa and two numa. On Kunpeng920, Each numa has 8 clusters and each cluster has 4 CPUs. With this patch, We noticed enhancement on tbench and netperf within one numa or cross two numa on top of tip-sched-core commit 9b46f1abc6d4 ("sched/debug: Print 'tgid' in sched_show_task()") tbench results (node 0): baseline patched 1: 327.2833 372.4623 ( 13.80%) 4: 1320.5933 1479.8833 ( 12.06%) 8: 2638.4867 2921.5267 ( 10.73%) 16: 5282.7133 5891.5633 ( 11.53%) 32: 9810.6733 9877.3400 ( 0.68%) 64: 7408.9367 7447.9900 ( 0.53%) 128: 6203.2600 6191.6500 ( -0.19%) tbench results (node 0-1): baseline patched 1: 332.0433 372.7223 ( 12.25%) 4: 1325.4667 1477.6733 ( 11.48%) 8: 2622.9433 2897.9967 ( 10.49%) 16: 5218.6100 5878.2967 ( 12.64%) 32: 10211.7000 11494.4000 ( 12.56%) 64: 13313.7333 16740.0333 ( 25.74%) 128: 13959.1000 14533.9000 ( 4.12%) netperf results TCP_RR (node 0): baseline patched 1: 76546.5033 90649.9867 ( 18.42%) 4: 77292.4450 90932.7175 ( 17.65%) 8: 77367.7254 90882.3467 ( 17.47%) 16: 78519.9048 90938.8344 ( 15.82%) 32: 72169.5035 72851.6730 ( 0.95%) 64: 25911.2457 25882.2315 ( -0.11%) 128: 10752.6572 10768.6038 ( 0.15%) netperf results TCP_RR (node 0-1): baseline patched 1: 76857.6667 90892.2767 ( 18.26%) 4: 78236.6475 90767.3017 ( 16.02%) 8: 77929.6096 90684.1633 ( 16.37%) 16: 77438.5873 90502.5787 ( 16.87%) 32: 74205.6635 88301.5612 ( 19.00%) 64: 69827.8535 71787.6706 ( 2.81%) 128: 25281.4366 25771.3023 ( 1.94%) netperf results UDP_RR (node 0): baseline patched 1: 96869.8400 110800.8467 ( 14.38%) 4: 97744.9750 109680.5425 ( 12.21%) 8: 98783.9863 110409.9637 ( 11.77%) 16: 99575.0235 110636.2435 ( 11.11%) 32: 95044.7250 97622.8887 ( 2.71%) 64: 32925.2146 32644.4991 ( -0.85%) 128: 12859.2343 12824.0051 ( -0.27%) netperf results UDP_RR (node 0-1): baseline patched 1: 97202.4733 110190.1200 ( 13.36%) 4: 95954.0558 106245.7258 ( 10.73%) 8: 96277.1958 105206.5304 ( 9.27%) 16: 97692.7810 107927.2125 ( 10.48%) 32: 79999.6702 103550.2999 ( 29.44%) 64: 80592.7413 87284.0856 ( 8.30%) 128: 27701.5770 29914.5820 ( 7.99%) Note neither Kunpeng920 nor x86 Jacobsville supports SMT, so the SMT branch in the code has not been tested but it supposed to work. Chen Yu also noticed this will improve the performance of tbench and netperf on a 24 CPUs Jacobsville machine, there are 4 CPUs in one cluster sharing L2 Cache. [https://lore.kernel.org/lkml/Ytfjs+m1kUs0ScSn@worktop.programming.kicks-ass.net] Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com> Reviewed-by: Chen Yu <yu.c.chen@intel.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Tested-and-reviewed-by: Chen Yu <yu.c.chen@intel.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Link: https://lkml.kernel.org/r/20231019033323.54147-3-yangyicong@huawei.com
2023-10-24sched: Add cpus_share_resources APIBarry Song
Add cpus_share_resources() API. This is the preparation for the optimization of select_idle_cpu() on platforms with cluster scheduler level. On a machine with clusters cpus_share_resources() will test whether two cpus are within the same cluster. On a non-cluster machine it will behaves the same as cpus_share_cache(). So we use "resources" here for cache resources. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Tested-and-reviewed-by: Chen Yu <yu.c.chen@intel.com> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lkml.kernel.org/r/20231019033323.54147-2-yangyicong@huawei.com
2023-10-12sched/topology: Rename 'DIE' domain to 'PKG'Peter Zijlstra
While reworking the x86 topology code Thomas tripped over creating a 'DIE' domain for the package mask. :-) Since these names are CONFIG_SCHED_DEBUG=y only, rename them to make the name less ambiguous. [ Shrikanth Hegde: rename on s390 as well. ] [ Valentin Schneider: also rename it in the comments. ] [ mingo: port to recent kernels & find all remaining occurances. ] Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Valentin Schneider <vschneid@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Acked-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/20230712141056.GI3100107@hirez.programming.kicks-ass.net
2023-10-09sched/topology: Move the declaration of 'schedutil_gov' to kernel/sched/sched.hIngo Molnar
Move it out of the .c file into the shared scheduler-internal header file, to gain type-checking. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Shrikanth Hegde <sshegde@linux.vnet.ibm.com> Cc: Valentin Schneider <vschneid@redhat.com> Link: https://lore.kernel.org/r/20231009060037.170765-3-sshegde@linux.vnet.ibm.com
2023-10-09sched/topology: Change behaviour of the 'sched_energy_aware' sysctl, based ↵Shrikanth Hegde
on the platform The 'sched_energy_aware' sysctl is available for the admin to disable/enable energy aware scheduling(EAS). EAS is enabled only if few conditions are met by the platform. They are, asymmetric CPU capacity, no SMT, schedutil CPUfreq governor, frequency invariant load tracking etc. A platform may boot without EAS capability, but could gain such capability at runtime. For example, changing/registering the cpufreq governor to schedutil. At present, though platform doesn't support EAS, this sysctl returns 1 and it ends up calling build_perf_domains on write to 1 and NOP when writing to 0. That is confusing and un-necessary. Desired behavior would be to have this sysctl to enable/disable the EAS on supported platform. On non-supported platform write to the sysctl would return not supported error and read of the sysctl would return empty. So sched_energy_aware returns empty - EAS is not possible at this moment This will include EAS capable platforms which have at least one EAS condition false during startup, e.g. not using the schedutil cpufreq governor sched_energy_aware returns 0 - EAS is supported but disabled by admin. sched_energy_aware returns 1 - EAS is supported and enabled. User can find out the reason why EAS is not possible by checking info messages. sched_is_eas_possible returns true if the platform can do EAS at this moment. Signed-off-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Valentin Schneider <vschneid@redhat.com> Link: https://lore.kernel.org/r/20231009060037.170765-3-sshegde@linux.vnet.ibm.com
2023-10-09sched/topology: Remove the EM_MAX_COMPLEXITY limitPierre Gondois
The Energy Aware Scheduler (EAS) estimates the energy consumption of placing a task on different CPUs. The goal is to minimize this energy consumption. Estimating the energy of different task placements is increasingly complex with the size of the platform. To avoid having a slow wake-up path, EAS is only enabled if this complexity is low enough. The current complexity limit was set in: b68a4c0dba3b1 ("sched/topology: Disable EAS on inappropriate platforms") ... based on the first implementation of EAS, which was re-computing the power of the whole platform for each task placement scenario, see: 390031e4c309 ("sched/fair: Introduce an energy estimation helper function") ... but the complexity of EAS was reduced in: eb92692b2544d ("sched/fair: Speed-up energy-aware wake-ups") ... and find_energy_efficient_cpu() (feec) algorithm was updated in: 3e8c6c9aac42 ("sched/fair: Remove task_util from effective utilization in feec()") find_energy_efficient_cpu() (feec) is now doing: feec() \_ for_each_pd(pd) [0] // get max_spare_cap_cpu and compute_prev_delta \_ for_each_cpu(pd) [1] \_ eenv_pd_busy_time(pd) [2] \_ for_each_cpu(pd) // compute_energy(pd) without the task \_ eenv_pd_max_util(pd, -1) [3.0] \_ for_each_cpu(pd) \_ em_cpu_energy(pd, -1) \_ for_each_ps(pd) // compute_energy(pd) with the task on prev_cpu \_ eenv_pd_max_util(pd, prev_cpu) [3.1] \_ for_each_cpu(pd) \_ em_cpu_energy(pd, prev_cpu) \_ for_each_ps(pd) // compute_energy(pd) with the task on max_spare_cap_cpu \_ eenv_pd_max_util(pd, max_spare_cap_cpu) [3.2] \_ for_each_cpu(pd) \_ em_cpu_energy(pd, max_spare_cap_cpu) \_ for_each_ps(pd) [3.1] happens only once since prev_cpu is unique. With the same definitions for nr_pd, nr_cpus and nr_ps, the complexity is of: nr_pd * (2 * [nr_cpus in pd] + 2 * ([nr_cpus in pd] + [nr_ps in pd])) + ([nr_cpus in pd] + [nr_ps in pd]) [0] * ( [1] + [2] + [3.0] + [3.2] ) + [3.1] = nr_pd * (4 * [nr_cpus in pd] + 2 * [nr_ps in pd]) + [nr_cpus in prev pd] + nr_ps The complexity limit was set to 2048 in: b68a4c0dba3b1 ("sched/topology: Disable EAS on inappropriate platforms") ... to make "EAS usable up to 16 CPUs with per-CPU DVFS and less than 8 performance states each". For the same platform, the complexity would actually be of: 16 * (4 + 2 * 7) + 1 + 7 = 296 Since the EAS complexity was greatly reduced since the limit was introduced, bigger platforms can handle EAS. For instance, a platform with 112 CPUs with 7 performance states each would not reach it: 112 * (4 + 2 * 7) + 1 + 7 = 2024 To reflect this improvement in the underlying EAS code, remove the EAS complexity check. Note that a limit on the number of CPUs still holds against EM_MAX_NUM_CPUS to avoid overflows during the energy estimation. [ mingo: Updates to the changelog. ] Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lore.kernel.org/r/20231009060037.170765-2-sshegde@linux.vnet.ibm.com
2023-10-09sched/topology: Consolidate and clean up access to a CPU's max compute capacityVincent Guittot
Remove the rq::cpu_capacity_orig field and use arch_scale_cpu_capacity() instead. The scheduler uses 3 methods to get access to a CPU's max compute capacity: - arch_scale_cpu_capacity(cpu) which is the default way to get a CPU's capacity. - cpu_capacity_orig field which is periodically updated with arch_scale_cpu_capacity(). - capacity_orig_of(cpu) which encapsulates rq->cpu_capacity_orig. There is no real need to save the value returned by arch_scale_cpu_capacity() in struct rq. arch_scale_cpu_capacity() returns: - either a per_cpu variable. - or a const value for systems which have only one capacity. Remove rq::cpu_capacity_orig and use arch_scale_cpu_capacity() everywhere. No functional changes. Some performance tests on Arm64: - small SMP device (hikey): no noticeable changes - HMP device (RB5): hackbench shows minor improvement (1-2%) - large smp (thx2): hackbench and tbench shows minor improvement (1%) Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lore.kernel.org/r/20231009103621.374412-2-vincent.guittot@linaro.org
2023-09-15sched/topology: Fix sched_numa_find_nth_cpu() commentYury Norov
Reword sched_numa_find_nth_cpu() comment and make it kernel-doc compatible. Signed-off-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Link: https://lore.kernel.org/r/20230819141239.287290-7-yury.norov@gmail.com
2023-09-15sched/topology: Handle NUMA_NO_NODE in sched_numa_find_nth_cpu()Yury Norov
sched_numa_find_nth_cpu() doesn't handle NUMA_NO_NODE properly, and may crash kernel if passed with it. On the other hand, the only user of sched_numa_find_nth_cpu() has to check NUMA_NO_NODE case explicitly. It would be easier for users if this logic will get moved into sched_numa_find_nth_cpu(). Signed-off-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Link: https://lore.kernel.org/r/20230819141239.287290-6-yury.norov@gmail.com
2023-09-15sched/topology: Fix sched_numa_find_nth_cpu() in CPU-less caseYury Norov
When the node provided by user is CPU-less, corresponding record in sched_domains_numa_masks is not set. Trying to dereference it in the following code leads to kernel crash. To avoid it, start searching from the nearest node with CPUs. Fixes: cd7f55359c90 ("sched: add sched_numa_find_nth_cpu()") Reported-by: Yicong Yang <yangyicong@hisilicon.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Yicong Yang <yangyicong@hisilicon.com> Cc: Mel Gorman <mgorman@suse.de> Link: https://lore.kernel.org/r/20230819141239.287290-4-yury.norov@gmail.com Closes: https://lore.kernel.org/lkml/CAAH8bW8C5humYnfpW3y5ypwx0E-09A3QxFE1JFzR66v+mO4XfA@mail.gmail.com/T/ Closes: https://lore.kernel.org/lkml/ZMHSNQfv39HN068m@yury-ThinkPad/T/#mf6431cb0b7f6f05193c41adeee444bc95bf2b1c4
2023-07-26sched/topology: Align group flags when removing degenerate domainChen Yu
The flags of the child of a given scheduling domain are used to initialize the flags of its scheduling groups. When the child of a scheduling domain is degenerated, the flags of its local scheduling group need to be updated to align with the flags of its new child domain. The flag SD_SHARE_CPUCAPACITY was aligned in Commit bf2dc42d6beb ("sched/topology: Propagate SMT flags when removing degenerate domain"). Further generalize this alignment so other flags can be used later, such as in cluster-based task wakeup. [1] Reported-by: Yicong Yang <yangyicong@huawei.com> Suggested-by: Ricardo Neri <ricardo.neri@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com> Reviewed-by: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20230713013133.2314153-1-yu.c.chen@intel.com
2023-07-13sched/topology: Record number of cores in sched groupTim C Chen
When balancing sibling domains that have different number of cores, tasks in respective sibling domain should be proportional to the number of cores in each domain. In preparation of implementing such a policy, record the number of cores in a scheduling group. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/04641eeb0e95c21224352f5743ecb93dfac44654.1688770494.git.tim.c.chen@linux.intel.com
2023-06-16sched/core: Fixed missing rq clock update before calling set_rq_offline()Hao Jia
When using a cpufreq governor that uses cpufreq_add_update_util_hook(), it is possible to trigger a missing update_rq_clock() warning for the CPU hotplug path: rq_attach_root() set_rq_offline() rq_offline_rt() __disable_runtime() sched_rt_rq_enqueue() enqueue_top_rt_rq() cpufreq_update_util() data->func(data, rq_clock(rq), flags) Move update_rq_clock() from sched_cpu_deactivate() (one of it's callers) into set_rq_offline() such that it covers all set_rq_offline() usage. Additionally change rq_attach_root() to use rq_lock_irqsave() so that it will properly manage the runqueue clock flags. Suggested-by: Ben Segall <bsegall@google.com> Signed-off-by: Hao Jia <jiahao.os@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20230613082012.49615-2-jiahao.os@bytedance.com
2023-06-16sched/topology: Mark set_sched_topology() __initMiaohe Lin
All callers of set_sched_topology() are within __init section. Mark it __init too. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <vschneid@redhat.com> Link: https://lore.kernel.org/r/20230603073645.1173332-1-linmiaohe@huawei.com
2023-05-08sched/topology: Propagate SMT flags when removing degenerate domainTim C Chen
When a degenerate cluster domain for core with SMT CPUs is removed, the SD_SHARE_CPUCAPACITY flag in the local child sched group was not propagated to the new parent. We need this flag to properly determine whether the local sched group is SMT. Set the flag in the local child sched group of the new parent sched domain. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Link: https://lkml.kernel.org/r/73cf0959eafa53c02e7ef6bf805d751d9190e55d.1683156492.git.tim.c.chen@linux.intel.com
2023-03-22sched/topology: Make sched_energy_mutex,update staticTom Rix
smatch reports kernel/sched/topology.c:212:1: warning: symbol 'sched_energy_mutex' was not declared. Should it be static? kernel/sched/topology.c:213:6: warning: symbol 'sched_energy_update' was not declared. Should it be static? These variables are only used in topology.c, so should be static Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <vschneid@redhat.com> Link: https://lore.kernel.org/r/20230314144818.1453523-1-trix@redhat.com
2023-02-21Merge tag 'net-next-6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
2023-02-20sched/topology: fix KASAN warning in hop_cmp()Yury Norov
Despite that prev_hop is used conditionally on cur_hop is not the first hop, it's initialized unconditionally. Because initialization implies dereferencing, it might happen that the code dereferences uninitialized memory, which has been spotted by KASAN. Fix it by reorganizing hop_cmp() logic. Reported-by: Bruno Goncalves <bgoncalv@redhat.com> Fixes: cd7f55359c90 ("sched: add sched_numa_find_nth_cpu()") Signed-off-by: Yury Norov <yury.norov@gmail.com> Link: https://lore.kernel.org/r/Y+7avK6V9SyAWsXi@yury-laptop/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-07sched/topology: Introduce sched_numa_hop_mask()Valentin Schneider
Tariq has pointed out that drivers allocating IRQ vectors would benefit from having smarter NUMA-awareness - cpumask_local_spread() only knows about the local node and everything outside is in the same bucket. sched_domains_numa_masks is pretty much what we want to hand out (a cpumask of CPUs reachable within a given distance budget), introduce sched_numa_hop_mask() to export those cpumasks. Link: http://lore.kernel.org/r/20220728191203.4055-1-tariqt@nvidia.com Signed-off-by: Valentin Schneider <vschneid@redhat.com> Reviewed-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-07sched: add sched_numa_find_nth_cpu()Yury Norov
The function finds Nth set CPU in a given cpumask starting from a given node. Leveraging the fact that each hop in sched_domains_numa_masks includes the same or greater number of CPUs than the previous one, we can use binary search on hops instead of linear walk, which makes the overall complexity of O(log n) in terms of number of cpumask_weight() calls. Signed-off-by: Yury Norov <yury.norov@gmail.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Peter Lafreniere <peter@n8pjl.ca> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-05sched/topology: Add __init for sched_init_domains()Bing Huang
sched_init_domains() is only used in initialization Signed-off-by: Bing Huang <huangbing@kylinos.cn> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20230105014943.9857-1-huangbing775@126.com
2022-12-27sched/topology: Add __init for init_defrootdomainBing Huang
init_defrootdomain is only used in initialization Signed-off-by: Bing Huang <huangbing@kylinos.cn> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Valentin Schneider <vschneid@redhat.com> Link: https://lkml.kernel.org/r/20221118034208.267330-1-huangbing775@126.com
2022-06-13sched/numa: Adjust imb_numa_nr to a better approximation of memory channelsMel Gorman
For a single LLC per node, a NUMA imbalance is allowed up until 25% of CPUs sharing a node could be active. One intent of the cut-off is to avoid an imbalance of memory channels but there is no topological information based on active memory channels. Furthermore, there can be differences between nodes depending on the number of populated DIMMs. A cut-off of 25% was arbitrary but generally worked. It does have a severe corner cases though when an parallel workload is using 25% of all available CPUs over-saturates memory channels. This can happen due to the initial forking of tasks that get pulled more to one node after early wakeups (e.g. a barrier synchronisation) that is not quickly corrected by the load balancer. The LB may fail to act quickly as the parallel tasks are considered to be poor migrate candidates due to locality or cache hotness. On a range of modern Intel CPUs, 12.5% appears to be a better cut-off assuming all memory channels are populated and is used as the new cut-off point. A minimum of 1 is specified to allow a communicating pair to remain local even for CPUs with low numbers of cores. For modern AMDs, there are multiple LLCs and are not affected. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20220520103519.1863-5-mgorman@techsingularity.net
2022-04-06sched: Move energy_aware sysctls to topology.cZhen Ni
move energy_aware sysctls to topology.c and use the new register_sysctl_init() to register the sysctl interface. Signed-off-by: Zhen Ni <nizhen@uniontech.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-03-15Merge branch 'sched/fast-headers' into sched/coreIngo Molnar
Merge the scheduler build speedup of the fast-headers tree. Cumulative scheduler (kernel/sched/) build time speedup on a Linux distribution's config, which enables all scheduler features, compared to the vanilla kernel: _____________________________________________________________________________ | | Vanilla kernel (v5.13-rc7): |_____________________________________________________________________________ | | Performance counter stats for 'make -j96 kernel/sched/' (3 runs): | | 126,975,564,374 instructions # 1.45 insn per cycle ( +- 0.00% ) | 87,637,847,671 cycles # 3.959 GHz ( +- 0.30% ) | 22,136.96 msec cpu-clock # 7.499 CPUs utilized ( +- 0.29% ) | | 2.9520 +- 0.0169 seconds time elapsed ( +- 0.57% ) |_____________________________________________________________________________ | | Patched kernel: |_____________________________________________________________________________ | | Performance counter stats for 'make -j96 kernel/sched/' (3 runs): | | 50,420,496,914 instructions # 1.47 insn per cycle ( +- 0.00% ) | 34,234,322,038 cycles # 3.946 GHz ( +- 0.31% ) | 8,675.81 msec cpu-clock # 3.053 CPUs utilized ( +- 0.45% ) | | 2.8420 +- 0.0181 seconds time elapsed ( +- 0.64% ) |_____________________________________________________________________________ Summary: - CPU time used to build the scheduler dropped by -60.9%, a reduction from 22.1 clock-seconds to 8.7 clock-seconds. - Wall-clock time to build the scheduler dropped by -3.9%, a reduction from 2.95 seconds to 2.84 seconds. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2022-03-08sched/topology: Remove redundant variable and fix incorrect type in ↵K Prateek Nayak
build_sched_domains While investigating the sparse warning reported by the LKP bot [1], observed that we have a redundant variable "top" in the function build_sched_domains that was introduced in the recent commit e496132ebedd ("sched/fair: Adjust the allowed NUMA imbalance when SD_NUMA spans multiple LLCs") The existing variable "sd" suffices which allows us to remove the redundant variable "top" while annotating the other variable "top_p" with the "__rcu" annotation to silence the sparse warning. [1] https://lore.kernel.org/lkml/202202170853.9vofgC3O-lkp@intel.com/ Fixes: e496132ebedd ("sched/fair: Adjust the allowed NUMA imbalance when SD_NUMA spans multiple LLCs") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lore.kernel.org/r/20220218162743.1134-1-kprateek.nayak@amd.com
2022-02-23sched/headers: Introduce kernel/sched/build_utility.c and build multiple .c ↵Ingo Molnar
files there Collect all utility functionality source code files into a single kernel/sched/build_utility.c file, via #include-ing the .c files: kernel/sched/clock.c kernel/sched/completion.c kernel/sched/loadavg.c kernel/sched/swait.c kernel/sched/wait_bit.c kernel/sched/wait.c CONFIG_CPU_FREQ: kernel/sched/cpufreq.c CONFIG_CPU_FREQ_GOV_SCHEDUTIL: kernel/sched/cpufreq_schedutil.c CONFIG_CGROUP_CPUACCT: kernel/sched/cpuacct.c CONFIG_SCHED_DEBUG: kernel/sched/debug.c CONFIG_SCHEDSTATS: kernel/sched/stats.c CONFIG_SMP: kernel/sched/cpupri.c kernel/sched/stop_task.c kernel/sched/topology.c CONFIG_SCHED_CORE: kernel/sched/core_sched.c CONFIG_PSI: kernel/sched/psi.c CONFIG_MEMBARRIER: kernel/sched/membarrier.c CONFIG_CPU_ISOLATION: kernel/sched/isolation.c CONFIG_SCHED_AUTOGROUP: kernel/sched/autogroup.c The goal is to amortize the 60+ KLOC header bloat from over a dozen build units into a single build unit. The build time of build_utility.c also roughly matches the build time of core.c and fair.c - allowing better load-balancing of scheduler-only rebuilds. Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2022-02-16sched/isolation: Use single feature type while referring to housekeeping cpumaskFrederic Weisbecker
Refer to housekeeping APIs using single feature types instead of flags. This prevents from passing multiple isolation features at once to housekeeping interfaces, which soon won't be possible anymore as each isolation features will have their own cpumask. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Juri Lelli <juri.lelli@redhat.com> Reviewed-by: Phil Auld <pauld@redhat.com> Link: https://lore.kernel.org/r/20220207155910.527133-5-frederic@kernel.org
2022-02-16sched/numa: Fix NUMA topology for systems with CPU-less nodesHuang Ying
The NUMA topology parameters (sched_numa_topology_type, sched_domains_numa_levels, and sched_max_numa_distance, etc.) identified by scheduler may be wrong for systems with CPU-less nodes. For example, the ACPI SLIT of a system with CPU-less persistent memory (Intel Optane DCPMM) nodes is as follows, [000h 0000 4] Signature : "SLIT" [System Locality Information Table] [004h 0004 4] Table Length : 0000042C [008h 0008 1] Revision : 01 [009h 0009 1] Checksum : 59 [00Ah 0010 6] Oem ID : "XXXX" [010h 0016 8] Oem Table ID : "XXXXXXX" [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "INTL" [020h 0032 4] Asl Compiler Revision : 20091013 [024h 0036 8] Localities : 0000000000000004 [02Ch 0044 4] Locality 0 : 0A 15 11 1C [030h 0048 4] Locality 1 : 15 0A 1C 11 [034h 0052 4] Locality 2 : 11 1C 0A 1C [038h 0056 4] Locality 3 : 1C 11 1C 0A While the `numactl -H` output is as follows, available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 node 0 size: 64136 MB node 0 free: 5981 MB node 1 cpus: 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 node 1 size: 64466 MB node 1 free: 10415 MB node 2 cpus: node 2 size: 253952 MB node 2 free: 253920 MB node 3 cpus: node 3 size: 253952 MB node 3 free: 253951 MB node distances: node 0 1 2 3 0: 10 21 17 28 1: 21 10 28 17 2: 17 28 10 28 3: 28 17 28 10 In this system, there are only 2 sockets. In each memory controller, both DRAM and PMEM DIMMs are installed. Although the physical NUMA topology is simple, the logical NUMA topology becomes a little complex. Because both the distance(0, 1) and distance (1, 3) are less than the distance (0, 3), it appears that node 1 sits between node 0 and node 3. And the whole system appears to be a glueless mesh NUMA topology type. But it's definitely not, there is even no CPU in node 3. This isn't a practical problem now yet. Because the PMEM nodes (node 2 and node 3 in example system) are offlined by default during system boot. So init_numa_topology_type() called during system boot will ignore them and set sched_numa_topology_type to NUMA_DIRECT. And init_numa_topology_type() is only called at runtime when a CPU of a never-onlined-before node gets plugged in. And there's no CPU in the PMEM nodes. But it appears better to fix this to make the code more robust. To test the potential problem. We have used a debug patch to call init_numa_topology_type() when the PMEM node is onlined (in __set_migration_target_nodes()). With that, the NUMA parameters identified by scheduler is as follows, sched_numa_topology_type: NUMA_GLUELESS_MESH sched_domains_numa_levels: 4 sched_max_numa_distance: 28 To fix the issue, the CPU-less nodes are ignored when the NUMA topology parameters are identified. Because a node may become CPU-less or not at run time because of CPU hotplug, the NUMA topology parameters need to be re-initialized at runtime for CPU hotplug too. With the patch, the NUMA parameters identified for the example system above is as follows, sched_numa_topology_type: NUMA_DIRECT sched_domains_numa_levels: 2 sched_max_numa_distance: 21 Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220214121553.582248-1-ying.huang@intel.com
2022-02-16sched: replace cpumask_weight with cpumask_empty where appropriateYury Norov
In some places, kernel/sched code calls cpumask_weight() to check if any bit of a given cpumask is set. We can do it more efficiently with cpumask_empty() because cpumask_empty() stops traversing the cpumask as soon as it finds first set bit, while cpumask_weight() counts all bits unconditionally. Signed-off-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220210224933.379149-23-yury.norov@gmail.com
2022-02-11sched/fair: Adjust the allowed NUMA imbalance when SD_NUMA spans multiple LLCsMel Gorman
Commit 7d2b5dd0bcc4 ("sched/numa: Allow a floating imbalance between NUMA nodes") allowed an imbalance between NUMA nodes such that communicating tasks would not be pulled apart by the load balancer. This works fine when there is a 1:1 relationship between LLC and node but can be suboptimal for multiple LLCs if independent tasks prematurely use CPUs sharing cache. Zen* has multiple LLCs per node with local memory channels and due to the allowed imbalance, it's far harder to tune some workloads to run optimally than it is on hardware that has 1 LLC per node. This patch allows an imbalance to exist up to the point where LLCs should be balanced between nodes. On a Zen3 machine running STREAM parallelised with OMP to have on instance per LLC the results and without binding, the results are 5.17.0-rc0 5.17.0-rc0 vanilla sched-numaimb-v6 MB/sec copy-16 162596.94 ( 0.00%) 580559.74 ( 257.05%) MB/sec scale-16 136901.28 ( 0.00%) 374450.52 ( 173.52%) MB/sec add-16 157300.70 ( 0.00%) 564113.76 ( 258.62%) MB/sec triad-16 151446.88 ( 0.00%) 564304.24 ( 272.61%) STREAM can use directives to force the spread if the OpenMP is new enough but that doesn't help if an application uses threads and it's not known in advance how many threads will be created. Coremark is a CPU and cache intensive benchmark parallelised with threads. When running with 1 thread per core, the vanilla kernel allows threads to contend on cache. With the patch; 5.17.0-rc0 5.17.0-rc0 vanilla sched-numaimb-v5 Min Score-16 368239.36 ( 0.00%) 389816.06 ( 5.86%) Hmean Score-16 388607.33 ( 0.00%) 427877.08 * 10.11%* Max Score-16 408945.69 ( 0.00%) 481022.17 ( 17.62%) Stddev Score-16 15247.04 ( 0.00%) 24966.82 ( -63.75%) CoeffVar Score-16 3.92 ( 0.00%) 5.82 ( -48.48%) It can also make a big difference for semi-realistic workloads like specjbb which can execute arbitrary numbers of threads without advance knowledge of how they should be placed. Even in cases where the average performance is neutral, the results are more stable. 5.17.0-rc0 5.17.0-rc0 vanilla sched-numaimb-v6 Hmean tput-1 71631.55 ( 0.00%) 73065.57 ( 2.00%) Hmean tput-8 582758.78 ( 0.00%) 556777.23 ( -4.46%) Hmean tput-16 1020372.75 ( 0.00%) 1009995.26 ( -1.02%) Hmean tput-24 1416430.67 ( 0.00%) 1398700.11 ( -1.25%) Hmean tput-32 1687702.72 ( 0.00%) 1671357.04 ( -0.97%) Hmean tput-40 1798094.90 ( 0.00%) 2015616.46 * 12.10%* Hmean tput-48 1972731.77 ( 0.00%) 2333233.72 ( 18.27%) Hmean tput-56 2386872.38 ( 0.00%) 2759483.38 ( 15.61%) Hmean tput-64 2909475.33 ( 0.00%) 2925074.69 ( 0.54%) Hmean tput-72 2585071.36 ( 0.00%) 2962443.97 ( 14.60%) Hmean tput-80 2994387.24 ( 0.00%) 3015980.59 ( 0.72%) Hmean tput-88 3061408.57 ( 0.00%) 3010296.16 ( -1.67%) Hmean tput-96 3052394.82 ( 0.00%) 2784743.41 ( -8.77%) Hmean tput-104 2997814.76 ( 0.00%) 2758184.50 ( -7.99%) Hmean tput-112 2955353.29 ( 0.00%) 2859705.09 ( -3.24%) Hmean tput-120 2889770.71 ( 0.00%) 2764478.46 ( -4.34%) Hmean tput-128 2871713.84 ( 0.00%) 2750136.73 ( -4.23%) Stddev tput-1 5325.93 ( 0.00%) 2002.53 ( 62.40%) Stddev tput-8 6630.54 ( 0.00%) 10905.00 ( -64.47%) Stddev tput-16 25608.58 ( 0.00%) 6851.16 ( 73.25%) Stddev tput-24 12117.69 ( 0.00%) 4227.79 ( 65.11%) Stddev tput-32 27577.16 ( 0.00%) 8761.05 ( 68.23%) Stddev tput-40 59505.86 ( 0.00%) 2048.49 ( 96.56%) Stddev tput-48 168330.30 ( 0.00%) 93058.08 ( 44.72%) Stddev tput-56 219540.39 ( 0.00%) 30687.02 ( 86.02%) Stddev tput-64 121750.35 ( 0.00%) 9617.36 ( 92.10%) Stddev tput-72 223387.05 ( 0.00%) 34081.13 ( 84.74%) Stddev tput-80 128198.46 ( 0.00%) 22565.19 ( 82.40%) Stddev tput-88 136665.36 ( 0.00%) 27905.97 ( 79.58%) Stddev tput-96 111925.81 ( 0.00%) 99615.79 ( 11.00%) Stddev tput-104 146455.96 ( 0.00%) 28861.98 ( 80.29%) Stddev tput-112 88740.49 ( 0.00%) 58288.23 ( 34.32%) Stddev tput-120 186384.86 ( 0.00%) 45812.03 ( 75.42%) Stddev tput-128 78761.09 ( 0.00%) 57418.48 ( 27.10%) Similarly, for embarassingly parallel problems like NPB-ep, there are improvements due to better spreading across LLC when the machine is not fully utilised. vanilla sched-numaimb-v6 Min ep.D 31.79 ( 0.00%) 26.11 ( 17.87%) Amean ep.D 31.86 ( 0.00%) 26.17 * 17.86%* Stddev ep.D 0.07 ( 0.00%) 0.05 ( 24.41%) CoeffVar ep.D 0.22 ( 0.00%) 0.20 ( 7.97%) Max ep.D 31.93 ( 0.00%) 26.21 ( 17.91%) Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20220208094334.16379-3-mgorman@techsingularity.net
2021-11-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc updates from Andrew Morton: "257 patches. Subsystems affected by this patch series: scripts, ocfs2, vfs, and mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache, gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools, memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm, vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram, cleanups, kfence, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits) mm/damon: remove return value from before_terminate callback mm/damon: fix a few spelling mistakes in comments and a pr_debug message mm/damon: simplify stop mechanism Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions Docs/admin-guide/mm/damon/start: simplify the content Docs/admin-guide/mm/damon/start: fix a wrong link Docs/admin-guide/mm/damon/start: fix wrong example commands mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on mm/damon: remove unnecessary variable initialization Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM) selftests/damon: support watermarks mm/damon/dbgfs: support watermarks mm/damon/schemes: activate schemes based on a watermarks mechanism tools/selftests/damon: update for regions prioritization of schemes mm/damon/dbgfs: support prioritization weights mm/damon/vaddr,paddr: support pageout prioritization mm/damon/schemes: prioritize regions within the quotas mm/damon/selftests: support schemes quotas mm/damon/dbgfs: support quotas of schemes ...
2021-11-06mm: move node_reclaim_distance to fix NUMA without SMPGeert Uytterhoeven
Patch series "Fix NUMA without SMP". SuperH is the only architecture which still supports NUMA without SMP, for good reasons (various memories scattered around the address space, each with varying latencies). This series fixes two build errors due to variables and functions used by the NUMA code being provided by SMP-only source files or sections. This patch (of 2): If CONFIG_NUMA=y, but CONFIG_SMP=n (e.g. sh/migor_defconfig): sh4-linux-gnu-ld: mm/page_alloc.o: in function `get_page_from_freelist': page_alloc.c:(.text+0x2c24): undefined reference to `node_reclaim_distance' Fix this by moving the declaration of node_reclaim_distance from an SMP-only to a generic file. Link: https://lkml.kernel.org/r/cover.1631781495.git.geert+renesas@glider.be Link: https://lkml.kernel.org/r/6432666a648dde85635341e6c918cee97c97d264.1631781495.git.geert+renesas@glider.be Fixes: a55c7454a8c887b2 ("sched/topology: Improve load balancing on AMD EPYC systems") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Suggested-by: Matt Fleming <matt@codeblueprint.co.uk> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yoshinori Sato <ysato@users.osdn.me> Cc: Rich Felker <dalias@libc.org> Cc: Gon Solo <gonsolo@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-10-31sched/fair: Wait before decaying max_newidle_lb_costVincent Guittot
Decay max_newidle_lb_cost only when it has not been updated for a while and ensure to not decay a recently changed value. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Acked-by: Mel Gorman <mgorman@suse.de> Link: https://lore.kernel.org/r/20211019123537.17146-4-vincent.guittot@linaro.org
2021-10-15sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQSebastian Andrzej Siewior
The push-IPI logic for RT tasks expects to be invoked from hardirq context. One reason is that a RT task on the remote CPU would block the softirq processing on PREEMPT_RT and so avoid pulling / balancing the RT tasks as intended. Annotate root_domain::rto_push_work as IRQ_WORK_HARD_IRQ. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20211006111852.1514359-2-bigeasy@linutronix.de
2021-10-15sched: Add cluster scheduler level in core and related Kconfig for ARM64Barry Song
This patch adds scheduler level for clusters and automatically enables the load balance among clusters. It will directly benefit a lot of workload which loves more resources such as memory bandwidth, caches. Testing has widely been done in two different hardware configurations of Kunpeng920: 24 cores in one NUMA(6 clusters in each NUMA node); 32 cores in one NUMA(8 clusters in each NUMA node) Workload is running on either one NUMA node or four NUMA nodes, thus, this can estimate the effect of cluster spreading w/ and w/o NUMA load balance. * Stream benchmark: 4threads stream (on 1NUMA * 24cores = 24cores) stream stream w/o patch w/ patch MB/sec copy 29929.64 ( 0.00%) 32932.68 ( 10.03%) MB/sec scale 29861.10 ( 0.00%) 32710.58 ( 9.54%) MB/sec add 27034.42 ( 0.00%) 32400.68 ( 19.85%) MB/sec triad 27225.26 ( 0.00%) 31965.36 ( 17.41%) 6threads stream (on 1NUMA * 24cores = 24cores) stream stream w/o patch w/ patch MB/sec copy 40330.24 ( 0.00%) 42377.68 ( 5.08%) MB/sec scale 40196.42 ( 0.00%) 42197.90 ( 4.98%) MB/sec add 37427.00 ( 0.00%) 41960.78 ( 12.11%) MB/sec triad 37841.36 ( 0.00%) 42513.64 ( 12.35%) 12threads stream (on 1NUMA * 24cores = 24cores) stream stream w/o patch w/ patch MB/sec copy 52639.82 ( 0.00%) 53818.04 ( 2.24%) MB/sec scale 52350.30 ( 0.00%) 53253.38 ( 1.73%) MB/sec add 53607.68 ( 0.00%) 55198.82 ( 2.97%) MB/sec triad 54776.66 ( 0.00%) 56360.40 ( 2.89%) Thus, it could help memory-bound workload especially under medium load. Similar improvement is also seen in lkp-pbzip2: * lkp-pbzip2 benchmark 2-96 threads (on 4NUMA * 24cores = 96cores) lkp-pbzip2 lkp-pbzip2 w/o patch w/ patch Hmean tput-2 11062841.57 ( 0.00%) 11341817.51 * 2.52%* Hmean tput-5 26815503.70 ( 0.00%) 27412872.65 * 2.23%* Hmean tput-8 41873782.21 ( 0.00%) 43326212.92 * 3.47%* Hmean tput-12 61875980.48 ( 0.00%) 64578337.51 * 4.37%* Hmean tput-21 105814963.07 ( 0.00%) 111381851.01 * 5.26%* Hmean tput-30 150349470.98 ( 0.00%) 156507070.73 * 4.10%* Hmean tput-48 237195937.69 ( 0.00%) 242353597.17 * 2.17%* Hmean tput-79 360252509.37 ( 0.00%) 362635169.23 * 0.66%* Hmean tput-96 394571737.90 ( 0.00%) 400952978.48 * 1.62%* 2-24 threads (on 1NUMA * 24cores = 24cores) lkp-pbzip2 lkp-pbzip2 w/o patch w/ patch Hmean tput-2 11071705.49 ( 0.00%) 11296869.10 * 2.03%* Hmean tput-4 20782165.19 ( 0.00%) 21949232.15 * 5.62%* Hmean tput-6 30489565.14 ( 0.00%) 33023026.96 * 8.31%* Hmean tput-8 40376495.80 ( 0.00%) 42779286.27 * 5.95%* Hmean tput-12 61264033.85 ( 0.00%) 62995632.78 * 2.83%* Hmean tput-18 86697139.39 ( 0.00%) 86461545.74 ( -0.27%) Hmean tput-24 104854637.04 ( 0.00%) 104522649.46 * -0.32%* In the case of 6 threads and 8 threads, we see the greatest performance improvement. Similar improvement can be seen on lkp-pixz though the improvement is smaller: * lkp-pixz benchmark 2-24 threads lkp-pixz (on 1NUMA * 24cores = 24cores) lkp-pixz lkp-pixz w/o patch w/ patch Hmean tput-2 6486981.16 ( 0.00%) 6561515.98 * 1.15%* Hmean tput-4 11645766.38 ( 0.00%) 11614628.43 ( -0.27%) Hmean tput-6 15429943.96 ( 0.00%) 15957350.76 * 3.42%* Hmean tput-8 19974087.63 ( 0.00%) 20413746.98 * 2.20%* Hmean tput-12 28172068.18 ( 0.00%) 28751997.06 * 2.06%* Hmean tput-18 39413409.54 ( 0.00%) 39896830.55 * 1.23%* Hmean tput-24 49101815.85 ( 0.00%) 49418141.47 * 0.64%* * SPECrate benchmark 4,8,16 copies mcf_r(on 1NUMA * 32cores = 32cores) Base Base Run Time Rate ------- --------- 4 Copies w/o 580 (w/ 570) w/o 11.1 (w/ 11.3) 8 Copies w/o 647 (w/ 605) w/o 20.0 (w/ 21.4, +7%) 16 Copies w/o 844 (w/ 844) w/o 30.6 (w/ 30.6) 32 Copies(on 4NUMA * 32 cores = 128cores) [w/o patch] Base Base Base Benchmarks Copies Run Time Rate --------------- ------- --------- --------- 500.perlbench_r 32 584 87.2 * 502.gcc_r 32 503 90.2 * 505.mcf_r 32 745 69.4 * 520.omnetpp_r 32 1031 40.7 * 523.xalancbmk_r 32 597 56.6 * 525.x264_r 1 -- CE 531.deepsjeng_r 32 336 109 * 541.leela_r 32 556 95.4 * 548.exchange2_r 32 513 163 * 557.xz_r 32 530 65.2 * Est. SPECrate2017_int_base 80.3 [w/ patch] Base Base Base Benchmarks Copies Run Time Rate --------------- ------- --------- --------- 500.perlbench_r 32 580 87.8 (+0.688%) * 502.gcc_r 32 477 95.1 (+5.432%) * 505.mcf_r 32 644 80.3 (+13.574%) * 520.omnetpp_r 32 942 44.6 (+9.58%) * 523.xalancbmk_r 32 560 60.4 (+6.714%%) * 525.x264_r 1 -- CE 531.deepsjeng_r 32 337 109 (+0.000%) * 541.leela_r 32 554 95.6 (+0.210%) * 548.exchange2_r 32 515 163 (+0.000%) * 557.xz_r 32 524 66.0 (+1.227%) * Est. SPECrate2017_int_base 83.7 (+4.062%) On the other hand, it is slightly helpful to CPU-bound tasks like kernbench: * 24-96 threads kernbench (on 4NUMA * 24cores = 96cores) kernbench kernbench w/o cluster w/ cluster Min user-24 12054.67 ( 0.00%) 12024.19 ( 0.25%) Min syst-24 1751.51 ( 0.00%) 1731.68 ( 1.13%) Min elsp-24 600.46 ( 0.00%) 598.64 ( 0.30%) Min user-48 12361.93 ( 0.00%) 12315.32 ( 0.38%) Min syst-48 1917.66 ( 0.00%) 1892.73 ( 1.30%) Min elsp-48 333.96 ( 0.00%) 332.57 ( 0.42%) Min user-96 12922.40 ( 0.00%) 12921.17 ( 0.01%) Min syst-96 2143.94 ( 0.00%) 2110.39 ( 1.56%) Min elsp-96 211.22 ( 0.00%) 210.47 ( 0.36%) Amean user-24 12063.99 ( 0.00%) 12030.78 * 0.28%* Amean syst-24 1755.20 ( 0.00%) 1735.53 * 1.12%* Amean elsp-24 601.60 ( 0.00%) 600.19 ( 0.23%) Amean user-48 12362.62 ( 0.00%) 12315.56 * 0.38%* Amean syst-48 1921.59 ( 0.00%) 1894.95 * 1.39%* Amean elsp-48 334.10 ( 0.00%) 332.82 * 0.38%* Amean user-96 12925.27 ( 0.00%) 12922.63 ( 0.02%) Amean syst-96 2146.66 ( 0.00%) 2122.20 * 1.14%* Amean elsp-96 211.96 ( 0.00%) 211.79 ( 0.08%) Note this patch isn't an universal win, it might hurt those workload which can benefit from packing. Though tasks which want to take advantages of lower communication latency of one cluster won't necessarily been packed in one cluster while kernel is not aware of clusters, they have some chance to be randomly packed. But this patch will make them more likely spread. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2021-10-14sched/topology: Remove unused numa_distance in cpu_attach_domain()Yicong Yang
numa_distance in cpu_attach_domain() is introduced in commit b5b217346de8 ("sched/topology: Warn when NUMA diameter > 2") to warn user when NUMA diameter > 2 as we'll misrepresent the scheduler topology structures at that time. This is fixed by Barry in commit 585b6d2723dc ("sched/topology: fix the issue groups don't span domain->span for NUMA diameter > 2") and numa_distance is unused now. So remove it. Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Barry Song <baohua@kernel.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lore.kernel.org/r/20210915063158.80639-1-yangyicong@hisilicon.com
2021-10-05sched/topology: Introduce sched_group::flagsRicardo Neri
There exist situations in which the load balance needs to know the properties of the CPUs in a scheduling group. When using asymmetric packing, for instance, the load balancer needs to know not only the state of dst_cpu but also of its SMT siblings, if any. Use the flags of the child scheduling domains to initialize scheduling group flags. This will reflect the properties of the CPUs in the group. A subsequent changeset will make use of these new flags. No functional changes are introduced. Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Len Brown <len.brown@intel.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20210911011819.12184-3-ricardo.neri-calderon@linux.intel.com
2021-08-20sched/topology: Skip updating masks for non-online nodesValentin Schneider
The scheduler currently expects NUMA node distances to be stable from init onwards, and as a consequence builds the related data structures once-and-for-all at init (see sched_init_numa()). Unfortunately, on some architectures node distance is unreliable for offline nodes and may very well change upon onlining. Skip over offline nodes during sched_init_numa(). Track nodes that have been onlined at least once, and trigger a build of a node's NUMA masks when it is first onlined post-init. Reported-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210818074333.48645-1-srikar@linux.vnet.ibm.com
2021-06-24sched/topology: Rework CPU capacity asymmetry detectionBeata Michalska
Currently the CPU capacity asymmetry detection, performed through asym_cpu_capacity_level, tries to identify the lowest topology level at which the highest CPU capacity is being observed, not necessarily finding the level at which all possible capacity values are visible to all CPUs, which might be bit problematic for some possible/valid asymmetric topologies i.e.: DIE [ ] MC [ ][ ] CPU [0] [1] [2] [3] [4] [5] [6] [7] Capacity |.....| |.....| |.....| |.....| L M B B Where: arch_scale_cpu_capacity(L) = 512 arch_scale_cpu_capacity(M) = 871 arch_scale_cpu_capacity(B) = 1024 In this particular case, the asymmetric topology level will point at MC, as all possible CPU masks for that level do cover the CPU with the highest capacity. It will work just fine for the first cluster, not so much for the second one though (consider the find_energy_efficient_cpu which might end up attempting the energy aware wake-up for a domain that does not see any asymmetry at all) Rework the way the capacity asymmetry levels are being detected, allowing to point to the lowest topology level (for a given CPU), where full set of available CPU capacities is visible to all CPUs within given domain. As a result, the per-cpu sd_asym_cpucapacity might differ across the domains. This will have an impact on EAS wake-up placement in a way that it might see different range of CPUs to be considered, depending on the given current and target CPUs. Additionally, those levels, where any range of asymmetry (not necessarily full) is being detected will get identified as well. The selected asymmetric topology level will be denoted by SD_ASYM_CPUCAPACITY_FULL sched domain flag whereas the 'sub-levels' would receive the already used SD_ASYM_CPUCAPACITY flag. This allows maintaining the current behaviour for asymmetric topologies, with misfit migration operating correctly on lower levels, if applicable, as any asymmetry is enough to trigger the misfit migration. The logic there relies on the SD_ASYM_CPUCAPACITY flag and does not relate to the full asymmetry level denoted by the sd_asym_cpucapacity pointer. Detecting the CPU capacity asymmetry is being based on a set of available CPU capacities for all possible CPUs. This data is being generated upon init and updated once CPU topology changes are being detected (through arch_update_cpu_topology). As such, any changes to identified CPU capacities (like initializing cpufreq) need to be explicitly advertised by corresponding archs to trigger rebuilding the data. Additional -dflags- parameter, used when building sched domains, has been removed as well, as the asymmetry flags are now being set directly in sd_init. Suggested-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Beata Michalska <beata.michalska@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lore.kernel.org/r/20210603140627.8409-3-beata.michalska@arm.com
2021-05-12sched: Wrap rq::lock accessPeter Zijlstra
In preparation of playing games with rq->lock, abstract the thing using an accessor. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Don Hiatt <dhiatt@digitalocean.com> Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com> Tested-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20210422123308.136465446@infradead.org
2021-04-17sched/debug: Rename the sched_debug parameter to sched_verbosePeter Zijlstra
CONFIG_SCHED_DEBUG is the build-time Kconfig knob, the boot param sched_debug and the /debug/sched/debug_enabled knobs control the sched_debug_enabled variable, but what they really do is make SCHED_DEBUG more verbose, so rename the lot. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2021-04-16sched,debug: Convert sysctl sched_domains to debugfsPeter Zijlstra
Stop polluting sysctl, move to debugfs for SCHED_DEBUG stuff. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Tested-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lkml.kernel.org/r/YHgB/s4KCBQ1ifdm@hirez.programming.kicks-ass.net
2021-03-25sched/topology: Remove redundant cpumask_and() in init_overlap_sched_group()Barry Song
mask is built in build_balance_mask() by for_each_cpu(i, sg_span), so it must be a subset of sched_group_span(sg). So the cpumask_and() call is redundant - remove it. [ mingo: Adjusted the changelog a bit. ] Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com> Link: https://lore.kernel.org/r/20210325023140.23456-1-song.bao.hua@hisilicon.com
2021-03-22sched: Fix various typosIngo Molnar
Fix ~42 single-word typos in scheduler code comments. We have accumulated a few fun ones over the years. :-) Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Segall <bsegall@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: linux-kernel@vger.kernel.org
2021-03-06sched/topology: fix the issue groups don't span domain->span for NUMA ↵Barry Song
diameter > 2 As long as NUMA diameter > 2, building sched_domain by sibling's child domain will definitely create a sched_domain with sched_group which will span out of the sched_domain: +------+ +------+ +-------+ +------+ | node | 12 |node | 20 | node | 12 |node | | 0 +---------+1 +--------+ 2 +-------+3 | +------+ +------+ +-------+ +------+ domain0 node0 node1 node2 node3 domain1 node0+1 node0+1 node2+3 node2+3 + domain2 node0+1+2 | group: node0+1 | group:node2+3 <-------------------+ when node2 is added into the domain2 of node0, kernel is using the child domain of node2's domain2, which is domain1(node2+3). Node 3 is outside the span of the domain including node0+1+2. This will make load_balance() run based on screwed avg_load and group_type in the sched_group spanning out of the sched_domain, and it also makes select_task_rq_fair() pick an idle CPU outside the sched_domain. Real servers which suffer from this problem include Kunpeng920 and 8-node Sun Fire X4600-M2, at least. Here we move to use the *child* domain of the *child* domain of node2's domain2 as the new added sched_group. At the same, we re-use the lower level sgc directly. +------+ +------+ +-------+ +------+ | node | 12 |node | 20 | node | 12 |node | | 0 +---------+1 +--------+ 2 +-------+3 | +------+ +------+ +-------+ +------+ domain0 node0 node1 +- node2 node3 | domain1 node0+1 node0+1 | node2+3 node2+3 | domain2 node0+1+2 | group: node0+1 | group:node2 <-------------------+ While the lower level sgc is re-used, this patch only changes the remote sched_groups for those sched_domains playing grandchild trick, therefore, sgc->next_update is still safe since it's only touched by CPUs that have the group span as local group. And sgc->imbalance is also safe because sd_parent remains the same in load_balance and LB only tries other CPUs from the local group. Moreover, since local groups are not touched, they are still getting roughly equal size in a TL. And should_we_balance() only matters with local groups, so the pull probability of those groups are still roughly equal. Tested by the below topology: qemu-system-aarch64 -M virt -nographic \ -smp cpus=8 \ -numa node,cpus=0-1,nodeid=0 \ -numa node,cpus=2-3,nodeid=1 \ -numa node,cpus=4-5,nodeid=2 \ -numa node,cpus=6-7,nodeid=3 \ -numa dist,src=0,dst=1,val=12 \ -numa dist,src=0,dst=2,val=20 \ -numa dist,src=0,dst=3,val=22 \ -numa dist,src=1,dst=2,val=22 \ -numa dist,src=2,dst=3,val=12 \ -numa dist,src=1,dst=3,val=24 \ -m 4G -cpu cortex-a57 -kernel arch/arm64/boot/Image w/o patch, we get lots of "groups don't span domain->span": [ 0.802139] CPU0 attaching sched-domain(s): [ 0.802193] domain-0: span=0-1 level=MC [ 0.802443] groups: 0:{ span=0 cap=1013 }, 1:{ span=1 cap=979 } [ 0.802693] domain-1: span=0-3 level=NUMA [ 0.802731] groups: 0:{ span=0-1 cap=1992 }, 2:{ span=2-3 cap=1943 } [ 0.802811] domain-2: span=0-5 level=NUMA [ 0.802829] groups: 0:{ span=0-3 cap=3935 }, 4:{ span=4-7 cap=3937 } [ 0.802881] ERROR: groups don't span domain->span [ 0.803058] domain-3: span=0-7 level=NUMA [ 0.803080] groups: 0:{ span=0-5 mask=0-1 cap=5843 }, 6:{ span=4-7 mask=6-7 cap=4077 } [ 0.804055] CPU1 attaching sched-domain(s): [ 0.804072] domain-0: span=0-1 level=MC [ 0.804096] groups: 1:{ span=1 cap=979 }, 0:{ span=0 cap=1013 } [ 0.804152] domain-1: span=0-3 level=NUMA [ 0.804170] groups: 0:{ span=0-1 cap=1992 }, 2:{ span=2-3 cap=1943 } [ 0.804219] domain-2: span=0-5 level=NUMA [ 0.804236] groups: 0:{ span=0-3 cap=3935 }, 4:{ span=4-7 cap=3937 } [ 0.804302] ERROR: groups don't span domain->span [ 0.804520] domain-3: span=0-7 level=NUMA [ 0.804546] groups: 0:{ span=0-5 mask=0-1 cap=5843 }, 6:{ span=4-7 mask=6-7 cap=4077 } [ 0.804677] CPU2 attaching sched-domain(s): [ 0.804687] domain-0: span=2-3 level=MC [ 0.804705] groups: 2:{ span=2 cap=934 }, 3:{ span=3 cap=1009 } [ 0.804754] domain-1: span=0-3 level=NUMA [ 0.804772] groups: 2:{ span=2-3 cap=1943 }, 0:{ span=0-1 cap=1992 } [ 0.804820] domain-2: span=0-5 level=NUMA [ 0.804836] groups: 2:{ span=0-3 mask=2-3 cap=3991 }, 4:{ span=0-1,4-7 mask=4-5 cap=5985 } [ 0.804944] ERROR: groups don't span domain->span [ 0.805108] domain-3: span=0-7 level=NUMA [ 0.805134] groups: 2:{ span=0-5 mask=2-3 cap=5899 }, 6:{ span=0-1,4-7 mask=6-7 cap=6125 } [ 0.805223] CPU3 attaching sched-domain(s): [ 0.805232] domain-0: span=2-3 level=MC [ 0.805249] groups: 3:{ span=3 cap=1009 }, 2:{ span=2 cap=934 } [ 0.805319] domain-1: span=0-3 level=NUMA [ 0.805336] groups: 2:{ span=2-3 cap=1943 }, 0:{ span=0-1 cap=1992 } [ 0.805383] domain-2: span=0-5 level=NUMA [ 0.805399] groups: 2:{ span=0-3 mask=2-3 cap=3991 }, 4:{ span=0-1,4-7 mask=4-5 cap=5985 } [ 0.805458] ERROR: groups don't span domain->span [ 0.805605] domain-3: span=0-7 level=NUMA [ 0.805626] groups: 2:{ span=0-5 mask=2-3 cap=5899 }, 6:{ span=0-1,4-7 mask=6-7 cap=6125 } [ 0.805712] CPU4 attaching sched-domain(s): [ 0.805721] domain-0: span=4-5 level=MC [ 0.805738] groups: 4:{ span=4 cap=984 }, 5:{ span=5 cap=924 } [ 0.805787] domain-1: span=4-7 level=NUMA [ 0.805803] groups: 4:{ span=4-5 cap=1908 }, 6:{ span=6-7 cap=2029 } [ 0.805851] domain-2: span=0-1,4-7 level=NUMA [ 0.805867] groups: 4:{ span=4-7 cap=3937 }, 0:{ span=0-3 cap=3935 } [ 0.805915] ERROR: groups don't span domain->span [ 0.806108] domain-3: span=0-7 level=NUMA [ 0.806130] groups: 4:{ span=0-1,4-7 mask=4-5 cap=5985 }, 2:{ span=0-3 mask=2-3 cap=3991 } [ 0.806214] CPU5 attaching sched-domain(s): [ 0.806222] domain-0: span=4-5 level=MC [ 0.806240] groups: 5:{ span=5 cap=924 }, 4:{ span=4 cap=984 } [ 0.806841] domain-1: span=4-7 level=NUMA [ 0.806866] groups: 4:{ span=4-5 cap=1908 }, 6:{ span=6-7 cap=2029 } [ 0.806934] domain-2: span=0-1,4-7 level=NUMA [ 0.806953] groups: 4:{ span=4-7 cap=3937 }, 0:{ span=0-3 cap=3935 } [ 0.807004] ERROR: groups don't span domain->span [ 0.807312] domain-3: span=0-7 level=NUMA [ 0.807386] groups: 4:{ span=0-1,4-7 mask=4-5 cap=5985 }, 2:{ span=0-3 mask=2-3 cap=3991 } [ 0.807686] CPU6 attaching sched-domain(s): [ 0.807710] domain-0: span=6-7 level=MC [ 0.807750] groups: 6:{ span=6 cap=1017 }, 7:{ span=7 cap=1012 } [ 0.807840] domain-1: span=4-7 level=NUMA [ 0.807870] groups: 6:{ span=6-7 cap=2029 }, 4:{ span=4-5 cap=1908 } [ 0.807952] domain-2: span=0-1,4-7 level=NUMA [ 0.807985] groups: 6:{ span=4-7 mask=6-7 cap=4077 }, 0:{ span=0-5 mask=0-1 cap=5843 } [ 0.808045] ERROR: groups don't span domain->span [ 0.808257] domain-3: span=0-7 level=NUMA [ 0.808571] groups: 6:{ span=0-1,4-7 mask=6-7 cap=6125 }, 2:{ span=0-5 mask=2-3 cap=5899 } [ 0.808848] CPU7 attaching sched-domain(s): [ 0.808860] domain-0: span=6-7 level=MC [ 0.808880] groups: 7:{ span=7 cap=1012 }, 6:{ span=6 cap=1017 } [ 0.808953] domain-1: span=4-7 level=NUMA [ 0.808974] groups: 6:{ span=6-7 cap=2029 }, 4:{ span=4-5 cap=1908 } [ 0.809034] domain-2: span=0-1,4-7 level=NUMA [ 0.809055] groups: 6:{ span=4-7 mask=6-7 cap=4077 }, 0:{ span=0-5 mask=0-1 cap=5843 } [ 0.809128] ERROR: groups don't span domain->span [ 0.810361] domain-3: span=0-7 level=NUMA [ 0.810400] groups: 6:{ span=0-1,4-7 mask=6-7 cap=5961 }, 2:{ span=0-5 mask=2-3 cap=5903 } w/ patch, we don't get "groups don't span domain->span" any more: [ 1.486271] CPU0 attaching sched-domain(s): [ 1.486820] domain-0: span=0-1 level=MC [ 1.500924] groups: 0:{ span=0 cap=980 }, 1:{ span=1 cap=994 } [ 1.515717] domain-1: span=0-3 level=NUMA [ 1.515903] groups: 0:{ span=0-1 cap=1974 }, 2:{ span=2-3 cap=1989 } [ 1.516989] domain-2: span=0-5 level=NUMA [ 1.517124] groups: 0:{ span=0-3 cap=3963 }, 4:{ span=4-5 cap=1949 } [ 1.517369] domain-3: span=0-7 level=NUMA [ 1.517423] groups: 0:{ span=0-5 mask=0-1 cap=5912 }, 6:{ span=4-7 mask=6-7 cap=4054 } [ 1.520027] CPU1 attaching sched-domain(s): [ 1.520097] domain-0: span=0-1 level=MC [ 1.520184] groups: 1:{ span=1 cap=994 }, 0:{ span=0 cap=980 } [ 1.520429] domain-1: span=0-3 level=NUMA [ 1.520487] groups: 0:{ span=0-1 cap=1974 }, 2:{ span=2-3 cap=1989 } [ 1.520687] domain-2: span=0-5 level=NUMA [ 1.520744] groups: 0:{ span=0-3 cap=3963 }, 4:{ span=4-5 cap=1949 } [ 1.520948] domain-3: span=0-7 level=NUMA [ 1.521038] groups: 0:{ span=0-5 mask=0-1 cap=5912 }, 6:{ span=4-7 mask=6-7 cap=4054 } [ 1.522068] CPU2 attaching sched-domain(s): [ 1.522348] domain-0: span=2-3 level=MC [ 1.522606] groups: 2:{ span=2 cap=1003 }, 3:{ span=3 cap=986 } [ 1.522832] domain-1: span=0-3 level=NUMA [ 1.522885] groups: 2:{ span=2-3 cap=1989 }, 0:{ span=0-1 cap=1974 } [ 1.523043] domain-2: span=0-5 level=NUMA [ 1.523092] groups: 2:{ span=0-3 mask=2-3 cap=4037 }, 4:{ span=4-5 cap=1949 } [ 1.523302] domain-3: span=0-7 level=NUMA [ 1.523352] groups: 2:{ span=0-5 mask=2-3 cap=5986 }, 6:{ span=0-1,4-7 mask=6-7 cap=6102 } [ 1.523748] CPU3 attaching sched-domain(s): [ 1.523774] domain-0: span=2-3 level=MC [ 1.523825] groups: 3:{ span=3 cap=986 }, 2:{ span=2 cap=1003 } [ 1.524009] domain-1: span=0-3 level=NUMA [ 1.524086] groups: 2:{ span=2-3 cap=1989 }, 0:{ span=0-1 cap=1974 } [ 1.524281] domain-2: span=0-5 level=NUMA [ 1.524331] groups: 2:{ span=0-3 mask=2-3 cap=4037 }, 4:{ span=4-5 cap=1949 } [ 1.524534] domain-3: span=0-7 level=NUMA [ 1.524586] groups: 2:{ span=0-5 mask=2-3 cap=5986 }, 6:{ span=0-1,4-7 mask=6-7 cap=6102 } [ 1.524847] CPU4 attaching sched-domain(s): [ 1.524873] domain-0: span=4-5 level=MC [ 1.524954] groups: 4:{ span=4 cap=958 }, 5:{ span=5 cap=991 } [ 1.525105] domain-1: span=4-7 level=NUMA [ 1.525153] groups: 4:{ span=4-5 cap=1949 }, 6:{ span=6-7 cap=2006 } [ 1.525368] domain-2: span=0-1,4-7 level=NUMA [ 1.525428] groups: 4:{ span=4-7 cap=3955 }, 0:{ span=0-1 cap=1974 } [ 1.532726] domain-3: span=0-7 level=NUMA [ 1.532811] groups: 4:{ span=0-1,4-7 mask=4-5 cap=6003 }, 2:{ span=0-3 mask=2-3 cap=4037 } [ 1.534125] CPU5 attaching sched-domain(s): [ 1.534159] domain-0: span=4-5 level=MC [ 1.534303] groups: 5:{ span=5 cap=991 }, 4:{ span=4 cap=958 } [ 1.534490] domain-1: span=4-7 level=NUMA [ 1.534572] groups: 4:{ span=4-5 cap=1949 }, 6:{ span=6-7 cap=2006 } [ 1.534734] domain-2: span=0-1,4-7 level=NUMA [ 1.534783] groups: 4:{ span=4-7 cap=3955 }, 0:{ span=0-1 cap=1974 } [ 1.536057] domain-3: span=0-7 level=NUMA [ 1.536430] groups: 4:{ span=0-1,4-7 mask=4-5 cap=6003 }, 2:{ span=0-3 mask=2-3 cap=3896 } [ 1.536815] CPU6 attaching sched-domain(s): [ 1.536846] domain-0: span=6-7 level=MC [ 1.536934] groups: 6:{ span=6 cap=1005 }, 7:{ span=7 cap=1001 } [ 1.537144] domain-1: span=4-7 level=NUMA [ 1.537262] groups: 6:{ span=6-7 cap=2006 }, 4:{ span=4-5 cap=1949 } [ 1.537553] domain-2: span=0-1,4-7 level=NUMA [ 1.537613] groups: 6:{ span=4-7 mask=6-7 cap=4054 }, 0:{ span=0-1 cap=1805 } [ 1.537872] domain-3: span=0-7 level=NUMA [ 1.537998] groups: 6:{ span=0-1,4-7 mask=6-7 cap=6102 }, 2:{ span=0-5 mask=2-3 cap=5845 } [ 1.538448] CPU7 attaching sched-domain(s): [ 1.538505] domain-0: span=6-7 level=MC [ 1.538586] groups: 7:{ span=7 cap=1001 }, 6:{ span=6 cap=1005 } [ 1.538746] domain-1: span=4-7 level=NUMA [ 1.538798] groups: 6:{ span=6-7 cap=2006 }, 4:{ span=4-5 cap=1949 } [ 1.539048] domain-2: span=0-1,4-7 level=NUMA [ 1.539111] groups: 6:{ span=4-7 mask=6-7 cap=4054 }, 0:{ span=0-1 cap=1805 } [ 1.539571] domain-3: span=0-7 level=NUMA [ 1.539610] groups: 6:{ span=0-1,4-7 mask=6-7 cap=6102 }, 2:{ span=0-5 mask=2-3 cap=5845 } Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Tested-by: Meelis Roos <mroos@linux.ee> Link: https://lkml.kernel.org/r/20210224030944.15232-1-song.bao.hua@hisilicon.com
2021-02-17sched/topology: Fix sched_domain_topology_level alloc in sched_init_numa()Dietmar Eggemann
Commit "sched/topology: Make sched_init_numa() use a set for the deduplicating sort" allocates 'i + nr_levels (level)' instead of 'i + nr_levels + 1' sched_domain_topology_level. This led to an Oops (on Arm64 juno with CONFIG_SCHED_DEBUG): sched_init_domains build_sched_domains() __free_domain_allocs() __sdt_free() { ... for_each_sd_topology(tl) ... sd = *per_cpu_ptr(sdd->sd, j); <-- ... } Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Vincent Guittot <vincent.guittot@linaro.org> Tested-by: Barry Song <song.bao.hua@hisilicon.com> Link: https://lkml.kernel.org/r/6000e39e-7d28-c360-9cd6-8798fd22a9bf@arm.com
2021-01-27sched/topology: Make sched_init_numa() use a set for the deduplicating sortValentin Schneider
The deduplicating sort in sched_init_numa() assumes that the first line in the distance table contains all unique values in the entire table. I've been trying to pen what this exactly means for the topology, but it's not straightforward. For instance, topology.c uses this example: node 0 1 2 3 0: 10 20 20 30 1: 20 10 20 20 2: 20 20 10 20 3: 30 20 20 10 0 ----- 1 | / | | / | | / | 2 ----- 3 Which works out just fine. However, if we swap nodes 0 and 1: 1 ----- 0 | / | | / | | / | 2 ----- 3 we get this distance table: node 0 1 2 3 0: 10 20 20 20 1: 20 10 20 30 2: 20 20 10 20 3: 20 30 20 10 Which breaks the deduplicating sort (non-representative first line). In this case this would just be a renumbering exercise, but it so happens that we can have a deduplicating sort that goes through the whole table in O(n²) at the extra cost of a temporary memory allocation (i.e. any form of set). The ACPI spec (SLIT) mentions distances are encoded on 8 bits. Following this, implement the set as a 256-bits bitmap. Should this not be satisfactory (i.e. we want to support 32-bit values), then we'll have to go for some other sparse set implementation. This has the added benefit of letting us allocate just the right amount of memory for sched_domains_numa_distance[], rather than an arbitrary (nr_node_ids + 1). Note: DT binding equivalent (distance-map) decodes distances as 32-bit values. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210122123943.1217-2-valentin.schneider@arm.com