summaryrefslogtreecommitdiff
path: root/kernel/signal.c
AgeCommit message (Collapse)Author
2019-09-16Merge tag 'core-process-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd/waitid updates from Christian Brauner: "This contains two features and various tests. First, it adds support for waiting on process through pidfds by adding the P_PIDFD type to the waitid() syscall. This completes the basic functionality of the pidfd api (cf. [1]). In the meantime we also have a new adition to the userspace projects that make use of the pidfd api. The qt project was nice enough to send a mail pointing out that they have a pr up to switch to the pidfd api (cf. [2]). Second, this tag contains an extension to the waitid() syscall to make it possible to wait on the current process group in a race free manner (even though the actual problem is very unlikely) by specifing 0 together with the P_PGID type. This extension traces back to a discussion on the glibc development mailing list. There are also a range of tests for the features above. Additionally, the test-suite which detected the pidfd-polling race we fixed in [3] is included in this tag" [1] https://lwn.net/Articles/794707/ [2] https://codereview.qt-project.org/c/qt/qtbase/+/108456 [3] commit b191d6491be6 ("pidfd: fix a poll race when setting exit_state") * tag 'core-process-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: waitid: Add support for waiting for the current process group tests: add pidfd poll tests tests: move common definitions and functions into pidfd.h pidfd: add pidfd_wait tests pidfd: add P_PIDFD to waitid()
2019-08-19signal: Allow cifs and drbd to receive their terminating signalsEric W. Biederman
My recent to change to only use force_sig for a synchronous events wound up breaking signal reception cifs and drbd. I had overlooked the fact that by default kthreads start out with all signals set to SIG_IGN. So a change I thought was safe turned out to have made it impossible for those kernel thread to catch their signals. Reverting the work on force_sig is a bad idea because what the code was doing was very much a misuse of force_sig. As the way force_sig ultimately allowed the signal to happen was to change the signal handler to SIG_DFL. Which after the first signal will allow userspace to send signals to these kernel threads. At least for wake_ack_receiver in drbd that does not appear actively wrong. So correct this problem by adding allow_kernel_signal that will allow signals whose siginfo reports they were sent by the kernel through, but will not allow userspace generated signals, and update cifs and drbd to call allow_kernel_signal in an appropriate place so that their thread can receive this signal. Fixing things this way ensures that userspace won't be able to send signals and cause problems, that it is clear which signals the threads are expecting to receive, and it guarantees that nothing else in the system will be affected. This change was partly inspired by similar cifs and drbd patches that added allow_signal. Reported-by: ronnie sahlberg <ronniesahlberg@gmail.com> Reported-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Cc: Steve French <smfrench@gmail.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: David Laight <David.Laight@ACULAB.COM> Fixes: 247bc9470b1e ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes") Fixes: 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig") Fixes: fee109901f39 ("signal/drbd: Use send_sig not force_sig") Fixes: 3cf5d076fb4d ("signal: Remove task parameter from force_sig") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-08-03kernel/signal.c: fix a kernel-doc markupMauro Carvalho Chehab
The kernel-doc parser doesn't handle expressions with %foo*. Instead, when an asterisk should be part of a constant, it uses an alternative notation: `foo*`. Link: http://lkml.kernel.org/r/7f18c2e0b5e39e6b7eb55ddeb043b8b260b49f2d.1563361575.git.mchehab+samsung@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-01pidfd: add P_PIDFD to waitid()Christian Brauner
This adds the P_PIDFD type to waitid(). One of the last remaining bits for the pidfd api is to make it possible to wait on pidfds. With P_PIDFD added to waitid() the parts of userspace that want to use the pidfd api to exclusively manage processes can do so now. One of the things this will unblock in the future is the ability to make it possible to retrieve the exit status via waitid(P_PIDFD) for non-parent processes if handed a _suitable_ pidfd that has this feature set. This is similar to what you can do on FreeBSD with kqueue(). It might even end up being possible to wait on a process as a non-parent if an appropriate property is enabled on the pidfd. With P_PIDFD no scoping of the process identified by the pidfd is possible, i.e. it explicitly blocks things such as wait4(-1), wait4(0), waitid(P_ALL), waitid(P_PGID) etc. It only allows for semantics equivalent to wait4(pid), waitid(P_PID). Users that need scoping should rely on pid-based wait*() syscalls for now. Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20190727222229.6516-2-christian@brauner.io
2019-07-29pidfd: Add warning if exit_state is 0 during notificationJoel Fernandes (Google)
Previously a condition got missed where the pidfd waiters are awakened before the exit_state gets set. This can result in a missed notification [1] and the polling thread waiting forever. It is fixed now, however it would be nice to avoid this kind of issue going unnoticed in the future. So just add a warning to catch it in the future. /* References */ [1]: https://lore.kernel.org/lkml/20190717172100.261204-1-joel@joelfernandes.org/ Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Link: https://lore.kernel.org/r/20190724164816.201099-1-joel@joelfernandes.org Signed-off-by: Christian Brauner <christian@brauner.io>
2019-07-16signal: simplify set_user_sigmask/restore_user_sigmaskOleg Nesterov
task->saved_sigmask and ->restore_sigmask are only used in the ret-from- syscall paths. This means that set_user_sigmask() can save ->blocked in ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked was modified. This way the callers do not need 2 sigset_t's passed to set/restore and restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns into the trivial helper which just calls restore_saved_sigmask(). Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David Laight <David.Laight@aculab.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-10Merge tag 'pidfd-updates-v5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd updates from Christian Brauner: "This adds two main features. - First, it adds polling support for pidfds. This allows process managers to know when a (non-parent) process dies in a race-free way. The notification mechanism used follows the same logic that is currently used when the parent of a task is notified of a child's death. With this patchset it is possible to put pidfds in an {e}poll loop and get reliable notifications for process (i.e. thread-group) exit. - The second feature compliments the first one by making it possible to retrieve pollable pidfds for processes that were not created using CLONE_PIDFD. A lot of processes get created with traditional PID-based calls such as fork() or clone() (without CLONE_PIDFD). For these processes a caller can currently not create a pollable pidfd. This is a problem for Android's low memory killer (LMK) and service managers such as systemd. Both patchsets are accompanied by selftests. It's perhaps worth noting that the work done so far and the work done in this branch for pidfd_open() and polling support do already see some adoption: - Android is in the process of backporting this work to all their LTS kernels [1] - Service managers make use of pidfd_send_signal but will need to wait until we enable waiting on pidfds for full adoption. - And projects I maintain make use of both pidfd_send_signal and CLONE_PIDFD [2] and will use polling support and pidfd_open() too" [1] https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.9+backport%22 https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.14+backport%22 https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.19+backport%22 [2] https://github.com/lxc/lxc/blob/aab6e3eb73c343231cdde775db938994fc6f2803/src/lxc/start.c#L1753 * tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: tests: add pidfd_open() tests arch: wire-up pidfd_open() pid: add pidfd_open() pidfd: add polling selftests pidfd: add polling support
2019-07-08Merge branch 'siginfo-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...
2019-07-08Merge tag 'audit-pr-20190702' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "This pull request is a bit early, but with some vacation time coming up I wanted to send this out now just in case the remote Internet Gods decide not to smile on me once the merge window opens. The patchset for v5.3 is pretty minor this time, the highlights include: - When the audit daemon is sent a signal, ensure we deliver information about the sender even when syscall auditing is not enabled/supported. - Add the ability to filter audit records based on network address family. - Tighten the audit field filtering restrictions on string based fields. - Cleanup the audit field filtering verification code. - Remove a few BUG() calls from the audit code" * tag 'audit-pr-20190702' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: remove the BUG() calls in the audit rule comparison functions audit: enforce op for string fields audit: add saddr_fam filter field audit: re-structure audit field valid checks audit: deliver signal_info regarless of syscall
2019-06-29signal: remove the wrong signal_pending() check in restore_user_sigmask()Oleg Nesterov
This is the minimal fix for stable, I'll send cleanups later. Commit 854a6ed56839 ("signal: Add restore_user_sigmask()") introduced the visible change which breaks user-space: a signal temporary unblocked by set_user_sigmask() can be delivered even if the caller returns success or timeout. Change restore_user_sigmask() to accept the additional "interrupted" argument which should be used instead of signal_pending() check, and update the callers. Eric said: : For clarity. I don't think this is required by posix, or fundamentally to : remove the races in select. It is what linux has always done and we have : applications who care so I agree this fix is needed. : : Further in any case where the semantic change that this patch rolls back : (aka where allowing a signal to be delivered and the select like call to : complete) would be advantage we can do as well if not better by using : signalfd. : : Michael is there any chance we can get this guarantee of the linux : implementation of pselect and friends clearly documented. The guarantee : that if the system call completes successfully we are guaranteed that no : signal that is unblocked by using sigmask will be delivered? Link: http://lkml.kernel.org/r/20190604134117.GA29963@redhat.com Fixes: 854a6ed56839a40f6b5d02a2962f48841482eec4 ("signal: Add restore_user_sigmask()") Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Eric Wong <e@80x24.org> Tested-by: Eric Wong <e@80x24.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Laight <David.Laight@ACULAB.COM> Cc: <stable@vger.kernel.org> [5.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-28pidfd: add polling supportJoel Fernandes (Google)
This patch adds polling support to pidfd. Android low memory killer (LMK) needs to know when a process dies once it is sent the kill signal. It does so by checking for the existence of /proc/pid which is both racy and slow. For example, if a PID is reused between when LMK sends a kill signal and checks for existence of the PID, since the wrong PID is now possibly checked for existence. Using the polling support, LMK will be able to get notified when a process exists in race-free and fast way, and allows the LMK to do other things (such as by polling on other fds) while awaiting the process being killed to die. For notification to polling processes, we follow the same existing mechanism in the kernel used when the parent of the task group is to be notified of a child's death (do_notify_parent). This is precisely when the tasks waiting on a poll of pidfd are also awakened in this patch. We have decided to include the waitqueue in struct pid for the following reasons: 1. The wait queue has to survive for the lifetime of the poll. Including it in task_struct would not be option in this case because the task can be reaped and destroyed before the poll returns. 2. By including the struct pid for the waitqueue means that during de_thread(), the new thread group leader automatically gets the new waitqueue/pid even though its task_struct is different. Appropriate test cases are added in the second patch to provide coverage of all the cases the patch is handling. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Daniel Colascione <dancol@google.com> Cc: Jann Horn <jannh@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Jonathan Kowalski <bl0pbl33p@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@android.com Reviewed-by: Oleg Nesterov <oleg@redhat.com> Co-developed-by: Daniel Colascione <dancol@google.com> Signed-off-by: Daniel Colascione <dancol@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Christian Brauner <christian@brauner.io>
2019-06-05signal: improve commentsChristian Brauner
Improve the comments for pidfd_send_signal(). First, the comment still referred to a file descriptor for a process as a "task file descriptor" which stems from way back at the beginning of the discussion. Replace this with "pidfd" for consistency. Second, the wording for the explanation of the arguments to the syscall was a bit inconsistent, e.g. some used the past tense some used present tense. Make the wording more consistent. Signed-off-by: Christian Brauner <christian@brauner.io>
2019-06-01kernel/signal.c: trace_signal_deliver when signal_group_exitZhenliang Wei
In the fixes commit, removing SIGKILL from each thread signal mask and executing "goto fatal" directly will skip the call to "trace_signal_deliver". At this point, the delivery tracking of the SIGKILL signal will be inaccurate. Therefore, we need to add trace_signal_deliver before "goto fatal" after executing sigdelset. Note: SEND_SIG_NOINFO matches the fact that SIGKILL doesn't have any info. Link: http://lkml.kernel.org/r/20190425025812.91424-1-weizhenliang@huawei.com Fixes: cf43a757fd4944 ("signal: Restore the stop PTRACE_EVENT_EXIT") Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com> Reviewed-by: Christian Brauner <christian@brauner.io> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Ivan Delalande <colona@arista.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-29signal: Remove the signal number and task parameters from force_sig_infoEric W. Biederman
force_sig_info always delivers to the current task and the signal parameter always matches info.si_signo. So remove those parameters to make it a simpler less error prone interface, and to make it clear that none of the callers are doing anything clever. This guarantees that force_sig_info will not grow any new buggy callers that attempt to call force_sig on a non-current task, or that pass an signal number that does not match info.si_signo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-29signal: Factor force_sig_info_to_task out of force_sig_infoEric W. Biederman
All callers of force_sig_info pass info.si_signo in for the signal by definition as well as in practice. Further all callers of force_sig_info except force_sig_fault_to_task pass current as the target task to force_sig_info. Factor out a static force_sig_info_to_task that force_sig_fault_to_task can call. This prepares the way for force_sig_info to have it's task and signal parameters removed. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-29signal: Generate the siginfo in force_sigEric W. Biederman
In preparation for removing the special case in force_sig_info for only having a signal number generate an appropriate siginfo in force_sig the last caller of force_sig_info that does not pass a filled out siginfo. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-29signal: Move the computation of force into send_signal and correct it.Eric W. Biederman
Forcing a signal or not allowing a pid namespace init to ignore SIGKILL or SIGSTOP is more cleanly computed in send_signal. There are two cases where we don't allow a pid namespace init to ignore SIGKILL or SIGSTOP. If the sending process is from an ancestor pid namespace and as such is effectively the god to the target process, and if the it is the kernel that is sending the signal, not another application. It is known that a process is from an ancestor pid namespace if it can see it's target but it's target does not have a pid for the sender in it's pid namespace. It is know that a signal is sent from the kernel if si_code is set to SI_KERNEL or info is SEND_SIG_PRIV (which ultimately generates a signal with si_code == SI_KERNEL). The only signals that matter are SIGKILL and SIGSTOP neither of which can really be caught, and both of which always have a siginfo layout that includes si_uid and si_pid. Therefore we never need to worry about forcing a signal when si_pid and si_uid are absent. So handle the two special cases of info and the case when si_pid and si_uid are present. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-29signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signalEric W. Biederman
Any time siginfo is not stored in the signal queue information is lost. Therefore set TRACE_SIGNAL_LOSE_INFO every time the code does not allocate a signal queue entry, and a queue overflow abort is not triggered. Fixes: ba005e1f4172 ("tracepoint: Add signal loss events") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-29signal: Remove the task parameter from force_sig_faultEric W. Biederman
As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-29signal: Use force_sig_fault_to_task for the two calls that don't deliver to ↵Eric W. Biederman
current In preparation for removing the task parameter from force_sig_fault introduce force_sig_fault_to_task and use it for the two cases where it matters. On mips force_fcr31_sig calls force_sig_fault and is called on either the current task, or a task that is suspended and is being switched to by the scheduler. This is safe because the task being switched to by the scheduler is guaranteed to be suspended. This ensures that task->sighand is stable while the signal is delivered to it. On parisc user_enable_single_step calls force_sig_fault and is in turn called by ptrace_request. The function ptrace_request always calls user_enable_single_step on a child that is stopped for tracing. The child being traced and not reaped ensures that child->sighand is not NULL, and that the child will not change child->sighand. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-27signal: Remove task parameter from force_sig_mceerrEric W. Biederman
All of the callers pass current into force_sig_mceer so remove the task parameter to make this obvious. This also makes it clear that force_sig_mceerr passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-27signal: Remove task parameter from force_sigEric W. Biederman
All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-27signal: Remove task parameter from force_sigsegvEric W. Biederman
The function force_sigsegv is always called on the current task so passing in current is redundant and not passing in current makes this fact obvious. This also makes it clear force_sigsegv always calls force_sig on the current task. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-22signal: Correct namespace fixups of si_pid and si_uidEric W. Biederman
The function send_signal was split from __send_signal so that it would be possible to bypass the namespace logic based upon current[1]. As it turns out the si_pid and the si_uid fixup are both inappropriate in the case of kill_pid_usb_asyncio so move that logic into send_signal. It is difficult to arrange but possible for a signal with an si_code of SI_TIMER or SI_SIGIO to be sent across namespace boundaries. In which case tests for when it is ok to change si_pid and si_uid based on SI_FROMUSER are incorrect. Replace the use of SI_FROMUSER with a new test has_si_pid_and_used based on siginfo_layout. Now that the uid fixup is no longer present after expanding SEND_SIG_NOINFO properly calculate the si_uid that the target task needs to read. [1] 7978b567d315 ("signals: add from_ancestor_ns parameter to send_signal()") Cc: stable@vger.kernel.org Fixes: 6588c1e3ff01 ("signals: SI_USER: Masquerade si_pid when crossing pid ns boundary") Fixes: 6b550f949594 ("user namespace: make signal.c respect user namespaces") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-22signal/usb: Replace kill_pid_info_as_cred with kill_pid_usb_asyncioEric W. Biederman
The usb support for asyncio encoded one of it's values in the wrong field. It should have used si_value but instead used si_addr which is not present in the _rt union member of struct siginfo. The practical result of this is that on a 64bit big endian kernel when delivering a signal to a 32bit process the si_addr field is set to NULL, instead of the expected pointer value. This issue can not be fixed in copy_siginfo_to_user32 as the usb usage of the the _sigfault (aka si_addr) member of the siginfo union when SI_ASYNCIO is set is incompatible with the POSIX and glibc usage of the _rt member of the siginfo union. Therefore replace kill_pid_info_as_cred with kill_pid_usb_asyncio a dedicated function for this one specific case. There are no other users of kill_pid_info_as_cred so this specialization should have no impact on the amount of code in the kernel. Have kill_pid_usb_asyncio take instead of a siginfo_t which is difficult and error prone, 3 arguments, a signal number, an errno value, and an address enconded as a sigval_t. The encoding of the address as a sigval_t allows the code that reads the userspace request for a signal to handle this compat issue along with all of the other compat issues. Add BUILD_BUG_ONs in kernel/signal.c to ensure that we can now place the pointer value at the in si_pid (instead of si_addr). That is the code now verifies that si_pid and si_addr always occur at the same location. Further the code veries that for native structures a value placed in si_pid and spilling into si_uid will appear in userspace in si_addr (on a byte by byte copy of siginfo or a field by field copy of siginfo). The code also verifies that for a 64bit kernel and a 32bit userspace the 32bit pointer will fit in si_pid. I have used the usbsig.c program below written by Alan Stern and slightly tweaked by me to run on a big endian machine to verify the issue exists (on sparc64) and to confirm the patch below fixes the issue. /* usbsig.c -- test USB async signal delivery */ #define _GNU_SOURCE #include <stdio.h> #include <fcntl.h> #include <signal.h> #include <string.h> #include <sys/ioctl.h> #include <unistd.h> #include <endian.h> #include <linux/usb/ch9.h> #include <linux/usbdevice_fs.h> static struct usbdevfs_urb urb; static struct usbdevfs_disconnectsignal ds; static volatile sig_atomic_t done = 0; void urb_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p urb: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &urb); printf("%s\n", (info->si_addr == &urb) ? "Good" : "Bad"); } void ds_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p ds: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &ds); printf("%s\n", (info->si_addr == &ds) ? "Good" : "Bad"); done = 1; } int main(int argc, char **argv) { char *devfilename; int fd; int rc; struct sigaction act; struct usb_ctrlrequest *req; void *ptr; char buf[80]; if (argc != 2) { fprintf(stderr, "Usage: usbsig device-file-name\n"); return 1; } devfilename = argv[1]; fd = open(devfilename, O_RDWR); if (fd == -1) { perror("Error opening device file"); return 1; } act.sa_sigaction = urb_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR1, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } act.sa_sigaction = ds_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR2, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } memset(&urb, 0, sizeof(urb)); urb.type = USBDEVFS_URB_TYPE_CONTROL; urb.endpoint = USB_DIR_IN | 0; urb.buffer = buf; urb.buffer_length = sizeof(buf); urb.signr = SIGUSR1; req = (struct usb_ctrlrequest *) buf; req->bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE; req->bRequest = USB_REQ_GET_DESCRIPTOR; req->wValue = htole16(USB_DT_DEVICE << 8); req->wIndex = htole16(0); req->wLength = htole16(sizeof(buf) - sizeof(*req)); rc = ioctl(fd, USBDEVFS_SUBMITURB, &urb); if (rc == -1) { perror("Error in SUBMITURB ioctl"); return 1; } rc = ioctl(fd, USBDEVFS_REAPURB, &ptr); if (rc == -1) { perror("Error in REAPURB ioctl"); return 1; } memset(&ds, 0, sizeof(ds)); ds.signr = SIGUSR2; ds.context = &ds; rc = ioctl(fd, USBDEVFS_DISCSIGNAL, &ds); if (rc == -1) { perror("Error in DISCSIGNAL ioctl"); return 1; } printf("Waiting for usb disconnect\n"); while (!done) { sleep(1); } close(fd); return 0; } Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.com> Fixes: v2.3.39 Cc: stable@vger.kernel.org Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-21audit: deliver signal_info regarless of syscallRichard Guy Briggs
When a process signals the audit daemon (shutdown, rotate, resume, reconfig) but syscall auditing is not enabled, we still want to know the identity of the process sending the signal to the audit daemon. Move audit_signal_info() out of syscall auditing to general auditing but create a new function audit_signal_info_syscall() to take care of the syscall dependent parts for when syscall auditing is enabled. Please see the github kernel audit issue https://github.com/linux-audit/audit-kernel/issues/111 Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16signal: unconditionally leave the frozen state in ptrace_stop()Roman Gushchin
Alex Xu reported a regression in strace, caused by the introduction of the cgroup v2 freezer. The regression can be reproduced by stracing the following simple program: #include <unistd.h> int main() { write(1, "a", 1); return 0; } An attempt to run strace ./a.out leads to the infinite loop: [ pre-main omitted ] write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set) write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set) write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set) write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set) write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set) write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set) [ repeats forever ] The problem occurs because the traced task leaves ptrace_stop() (and the signal handling loop) with the frozen bit set. So let's call cgroup_leave_frozen(true) unconditionally after sleeping in ptrace_stop(). With this patch applied, strace works as expected: [ pre-main omitted ] write(1, "a", 1) = 1 exit_group(0) = ? +++ exited with 0 +++ Reported-by: Alex Xu <alex_y_xu@yahoo.ca> Fixes: 76f969e8948d ("cgroup: cgroup v2 freezer") Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2019-05-14kernel/signal.c: annotate implicit fall throughMathieu Malaterre
There is a plan to build the kernel with -Wimplicit-fallthrough and this place in the code produced a warning (W=1). This commit remove the following warning: kernel/signal.c:795:13: warning: this statement may fall through [-Wimplicit-fallthrough=] Link: http://lkml.kernel.org/r/20190114203505.17875-1-malat@debian.org Signed-off-by: Mathieu Malaterre <malat@debian.org> Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-09Merge branch 'for-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "This includes Roman's cgroup2 freezer implementation. It's a separate machanism from cgroup1 freezer. Instead of blocking user tasks in arbitrary uninterruptible sleeps, the new implementation extends jobctl stop - frozen tasks are trapped in jobctl stop until thawed and can be killed and ptraced. Lots of thanks to Oleg for sheperding the effort. Other than that, there are a few trivial changes" * 'for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: never call do_group_exit() with task->frozen bit set kernel: cgroup: fix misuse of %x cgroup: get rid of cgroup_freezer_frozen_exit() cgroup: prevent spurious transition into non-frozen state cgroup: Remove unused cgrp variable cgroup: document cgroup v2 freezer interface cgroup: add tracing points for cgroup v2 freezer cgroup: make TRACE_CGROUP_PATH irq-safe kselftests: cgroup: add freezer controller self-tests kselftests: cgroup: don't fail on cg_kill_all() error in cg_destroy() cgroup: cgroup v2 freezer cgroup: protect cgroup->nr_(dying_)descendants by css_set_lock cgroup: implement __cgroup_task_count() helper cgroup: rename freezer.c into legacy_freezer.c cgroup: remove extra cgroup_migrate_finish() call
2019-05-09cgroup: never call do_group_exit() with task->frozen bit setRoman Gushchin
I've got two independent reports that cgroup_task_frozen() check in cgroup_exit() has been triggered by lkp libhugetlbfs-test and LTP ptrace01 tests. For example: [ 44.576072] WARNING: CPU: 1 PID: 3028 at kernel/cgroup/cgroup.c:5932 cgroup_exit+0x148/0x160 [ 44.577724] Modules linked in: crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sr_mod cdrom bochs_drm sg ttm ata_generic pata_acpi ppdev drm_kms_helper snd_pcm syscopyarea aesni_intel snd_timer sysfillrect sysimgblt snd crypto_simd cryptd glue_helper soundcore fb_sys_fops joydev drm serio_raw pcspkr ata_piix libata i2c_piix4 floppy parport_pc parport ip_tables [ 44.583106] CPU: 1 PID: 3028 Comm: ptrace-write-hu Not tainted 5.1.0-rc3-00053-g9262503 #5 [ 44.584600] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 44.586116] RIP: 0010:cgroup_exit+0x148/0x160 [ 44.587135] Code: 0f 84 50 ff ff ff 48 8b 85 c8 0c 00 00 48 8b 78 70 e8 ec 2e 00 00 e9 3b ff ff ff f0 ff 43 60 0f 88 72 21 89 00 e9 48 ff ff ff <0f> 0b e9 1b ff ff ff e8 3c 73 f4 ff 66 90 66 2e 0f 1f 84 00 00 00 [ 44.590113] RSP: 0018:ffffb25702dcfd30 EFLAGS: 00010002 [ 44.591167] RAX: ffff96a7fee32410 RBX: ffff96a7ff1d6000 RCX: dead000000000200 [ 44.592446] RDX: ffff96a7ff1d6080 RSI: ffff96a7fec75290 RDI: ffff96a7fec75290 [ 44.593715] RBP: ffff96a7fec745c0 R08: ffff96a7fec74658 R09: 0000000000000000 [ 44.594985] R10: 0000000000000000 R11: 0000000000000001 R12: ffff96a7fec75101 [ 44.596266] R13: ffff96a7fec745c0 R14: ffff96a7ff3bde30 R15: ffff96a7fec75130 [ 44.597550] FS: 0000000000000000(0000) GS:ffff96a7dd700000(0000) knlGS:0000000000000000 [ 44.598950] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 44.600098] CR2: 00000000f7a00000 CR3: 000000000d20e000 CR4: 00000000000406e0 [ 44.601417] Call Trace: [ 44.602777] do_exit+0x337/0xc40 [ 44.603677] do_group_exit+0x3a/0xa0 [ 44.604610] get_signal+0x12e/0x8d0 [ 44.605533] ? __switch_to_asm+0x40/0x70 [ 44.606503] do_signal+0x36/0x650 [ 44.607409] ? __switch_to_asm+0x40/0x70 [ 44.608383] ? __schedule+0x267/0x860 [ 44.609329] exit_to_usermode_loop+0x89/0xf0 [ 44.610349] do_fast_syscall_32+0x251/0x2e3 [ 44.611357] entry_SYSENTER_compat+0x7f/0x91 [ 44.612376] ---[ end trace e4ca5cfc4b7f7964 ]--- The problem is caused by the ptrace_signal() call in the for loop in get_signal(). There is a cgroup_enter_frozen() call inside ptrace_signal(), so after exit from ptrace_signal() the task->frozen bit might be set. In this case do_group_exit() can be called with the task->frozen bit set and trigger the warning. This is only place where we can leave the loop with the task->frozen bit set and without setting JOBCTL_TRAP_FREEZE and TIF_SIGPENDING. To resolve this problem, let's move cgroup_leave_frozen(true) call to just after the fatal label. If the task is going to die, the frozen bit must be cleared no matter how we get into this point. Reported-by: kernel test robot <rong.a.chen@intel.com> Reported-by: Qian Cai <cai@lca.pw> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2019-05-07Merge tag 'pidfd-v5.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd updates from Christian Brauner: "This patchset makes it possible to retrieve pidfds at process creation time by introducing the new flag CLONE_PIDFD to the clone() system call. Linus originally suggested to implement this as a new flag to clone() instead of making it a separate system call. After a thorough review from Oleg CLONE_PIDFD returns pidfds in the parent_tidptr argument. This means we can give back the associated pid and the pidfd at the same time. Access to process metadata information thus becomes rather trivial. As has been agreed, CLONE_PIDFD creates file descriptors based on anonymous inodes similar to the new mount api. They are made unconditional by this patchset as they are now needed by core kernel code (vfs, pidfd) even more than they already were before (timerfd, signalfd, io_uring, epoll etc.). The core patchset is rather small. The bulky looking changelist is caused by David's very simple changes to Kconfig to make anon inodes unconditional. A pidfd comes with additional information in fdinfo if the kernel supports procfs. The fdinfo file contains the pid of the process in the callers pid namespace in the same format as the procfs status file, i.e. "Pid:\t%d". To remove worries about missing metadata access this patchset comes with a sample/test program that illustrates how a combination of CLONE_PIDFD and pidfd_send_signal() can be used to gain race-free access to process metadata through /proc/<pid>. Further work based on this patchset has been done by Joel. His work makes pidfds pollable. It finished too late for this merge window. I would prefer to have it sitting in linux-next for a while and send it for inclusion during the 5.3 merge window" * tag 'pidfd-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: samples: show race-free pidfd metadata access signal: support CLONE_PIDFD with pidfd_send_signal clone: add CLONE_PIDFD Make anon_inodes unconditional
2019-05-07signal: support CLONE_PIDFD with pidfd_send_signalChristian Brauner
Let pidfd_send_signal() use pidfds retrieved via CLONE_PIDFD. With this patch pidfd_send_signal() becomes independent of procfs. This fullfils the request made when we merged the pidfd_send_signal() patchset. The pidfd_send_signal() syscall is now always available allowing for it to be used by users without procfs mounted or even users without procfs support compiled into the kernel. Signed-off-by: Christian Brauner <christian@brauner.io> Co-developed-by: Jann Horn <jannh@google.com> Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk>
2019-05-06cgroup: prevent spurious transition into non-frozen stateRoman Gushchin
If freezing of a cgroup races with waking of a task from the frozen state (like waiting in vfork() or in do_signal_stop()), a spurious transition of the cgroup state can happen. The task enters cgroup_leave_frozen(true), the cgroup->nr_frozen_tasks counter decrements, and the cgroup is switched to the unfrozen state. To prevent it, let's reserve cgroup_leave_frozen(true) for terminating processes and use cgroup_leave_frozen(false) otherwise. To avoid busy-looping in the signal handling loop waiting for JOBCTL_TRAP_FREEZE set from the cgroup freezing path, let's do it explicitly in cgroup_leave_frozen(), if the task is going to stay frozen. Suggested-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2019-04-19cgroup: cgroup v2 freezerRoman Gushchin
Cgroup v1 implements the freezer controller, which provides an ability to stop the workload in a cgroup and temporarily free up some resources (cpu, io, network bandwidth and, potentially, memory) for some other tasks. Cgroup v2 lacks this functionality. This patch implements freezer for cgroup v2. Cgroup v2 freezer tries to put tasks into a state similar to jobctl stop. This means that tasks can be killed, ptraced (using PTRACE_SEIZE*), and interrupted. It is possible to attach to a frozen task, get some information (e.g. read registers) and detach. It's also possible to migrate a frozen tasks to another cgroup. This differs cgroup v2 freezer from cgroup v1 freezer, which mostly tried to imitate the system-wide freezer. However uninterruptible sleep is fine when all tasks are going to be frozen (hibernation case), it's not the acceptable state for some subset of the system. Cgroup v2 freezer is not supporting freezing kthreads. If a non-root cgroup contains kthread, the cgroup still can be frozen, but the kthread will remain running, the cgroup will be shown as non-frozen, and the notification will not be delivered. * PTRACE_ATTACH is not working because non-fatal signal delivery is blocked in frozen state. There are some interface differences between cgroup v1 and cgroup v2 freezer too, which are required to conform the cgroup v2 interface design principles: 1) There is no separate controller, which has to be turned on: the functionality is always available and is represented by cgroup.freeze and cgroup.events cgroup control files. 2) The desired state is defined by the cgroup.freeze control file. Any hierarchical configuration is allowed. 3) The interface is asynchronous. The actual state is available using cgroup.events control file ("frozen" field). There are no dedicated transitional states. 4) It's allowed to make any changes with the cgroup hierarchy (create new cgroups, remove old cgroups, move tasks between cgroups) no matter if some cgroups are frozen. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@fb.com
2019-04-18signal: use fdget() since we don't allow O_PATHChristian Brauner
As stated in the original commit for pidfd_send_signal() we don't allow to signal processes through O_PATH file descriptors since it is semantically equivalent to a write on the pidfd. We already correctly error out right now and return EBADF if an O_PATH fd is passed. This is because we use file->f_op to detect whether a pidfd is passed and O_PATH fds have their file->f_op set to empty_fops in do_dentry_open() and thus fail the test. Thus, there is no regression. It's just semantically correct to use fdget() and return an error right from there instead of taking a reference and returning an error later. Signed-off-by: Christian Brauner <christian@brauner.io> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jann Horn <jann@thejh.net> Cc: David Howells <dhowells@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-01signal: don't silently convert SI_USER signals to non-current pidfdJann Horn
The current sys_pidfd_send_signal() silently turns signals with explicit SI_USER context that are sent to non-current tasks into signals with kernel-generated siginfo. This is unlike do_rt_sigqueueinfo(), which returns -EPERM in this case. If a user actually wants to send a signal with kernel-provided siginfo, they can do that with pidfd_send_signal(pidfd, sig, NULL, 0); so allowing this case is unnecessary. Instead of silently replacing the siginfo, just bail out with an error; this is consistent with other interfaces and avoids special-casing behavior based on security checks. Fixes: 3eb39f47934f ("signal: add pidfd_send_signal() syscall") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Christian Brauner <christian@brauner.io>
2019-03-16Merge tag 'pidfd-v5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd system call from Christian Brauner: "This introduces the ability to use file descriptors from /proc/<pid>/ as stable handles on struct pid. Even if a pid is recycled the handle will not change. For a start these fds can be used to send signals to the processes they refer to. With the ability to use /proc/<pid> fds as stable handles on struct pid we can fix a long-standing issue where after a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. With this patchset we enable a variety of use cases. One obvious example is that we can now safely delegate an important part of process management - sending signals - to processes other than the parent of a given process by sending file descriptors around via scm rights and not fearing that the given process will have been recycled in the meantime. It also allows for easy testing whether a given process is still alive or not by sending signal 0 to a pidfd which is quite handy. There has been some interest in this feature e.g. from systems management (systemd, glibc) and container managers. I have requested and gotten comments from glibc to make sure that this syscall is suitable for their needs as well. In the future I expect it to take on most other pid-based signal syscalls. But such features are left for the future once they are needed. This has been sitting in linux-next for quite a while and has not caused any issues. It comes with selftests which verify basic functionality and also test that a recycled pid cannot be signaled via a pidfd. Jon has written about a prior version of this patchset. It should cover the basic functionality since not a lot has changed since then: https://lwn.net/Articles/773459/ The commit message for the syscall itself is extensively documenting the syscall, including it's functionality and extensibility" * tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: selftests: add tests for pidfd_send_signal() signal: add pidfd_send_signal() syscall
2019-03-05Merge branch 'timers-2038-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull year 2038 updates from Thomas Gleixner: "Another round of changes to make the kernel ready for 2038. After lots of preparatory work this is the first set of syscalls which are 2038 safe: 403 clock_gettime64 404 clock_settime64 405 clock_adjtime64 406 clock_getres_time64 407 clock_nanosleep_time64 408 timer_gettime64 409 timer_settime64 410 timerfd_gettime64 411 timerfd_settime64 412 utimensat_time64 413 pselect6_time64 414 ppoll_time64 416 io_pgetevents_time64 417 recvmmsg_time64 418 mq_timedsend_time64 419 mq_timedreceiv_time64 420 semtimedop_time64 421 rt_sigtimedwait_time64 422 futex_time64 423 sched_rr_get_interval_time64 The syscall numbers are identical all over the architectures" * 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) riscv: Use latest system call ABI checksyscalls: fix up mq_timedreceive and stat exceptions unicore32: Fix __ARCH_WANT_STAT64 definition asm-generic: Make time32 syscall numbers optional asm-generic: Drop getrlimit and setrlimit syscalls from default list 32-bit userspace ABI: introduce ARCH_32BIT_OFF_T config option compat ABI: use non-compat openat and open_by_handle_at variants y2038: add 64-bit time_t syscalls to all 32-bit architectures y2038: rename old time and utime syscalls y2038: remove struct definition redirects y2038: use time32 syscall names on 32-bit syscalls: remove obsolete __IGNORE_ macros y2038: syscalls: rename y2038 compat syscalls x86/x32: use time64 versions of sigtimedwait and recvmmsg timex: change syscalls to use struct __kernel_timex timex: use __kernel_timex internally sparc64: add custom adjtimex/clock_adjtime functions time: fix sys_timer_settime prototype time: Add struct __kernel_timex time: make adjtime compat handling available for 32 bit ...
2019-03-05signal: add pidfd_send_signal() syscallChristian Brauner
The kill() syscall operates on process identifiers (pid). After a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. This issue has often surfaced and there has been a push to address this problem [1]. This patch uses file descriptors (fd) from proc/<pid> as stable handles on struct pid. Even if a pid is recycled the handle will not change. The fd can be used to send signals to the process it refers to. Thus, the new syscall pidfd_send_signal() is introduced to solve this problem. Instead of pids it operates on process fds (pidfd). /* prototype and argument /* long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags); /* syscall number 424 */ The syscall number was chosen to be 424 to align with Arnd's rework in his y2038 to minimize merge conflicts (cf. [25]). In addition to the pidfd and signal argument it takes an additional siginfo_t and flags argument. If the siginfo_t argument is NULL then pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo(). The flags argument is added to allow for future extensions of this syscall. It currently needs to be passed as 0. Failing to do so will cause EINVAL. /* pidfd_send_signal() replaces multiple pid-based syscalls */ The pidfd_send_signal() syscall currently takes on the job of rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a positive pid is passed to kill(2). It will however be possible to also replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended. /* sending signals to threads (tid) and process groups (pgid) */ Specifically, the pidfd_send_signal() syscall does currently not operate on process groups or threads. This is left for future extensions. In order to extend the syscall to allow sending signal to threads and process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and PIDFD_TYPE_TID) should be added. This implies that the flags argument will determine what is signaled and not the file descriptor itself. Put in other words, grouping in this api is a property of the flags argument not a property of the file descriptor (cf. [13]). Clarification for this has been requested by Eric (cf. [19]). When appropriate extensions through the flags argument are added then pidfd_send_signal() can additionally replace the part of kill(2) which operates on process groups as well as the tgkill(2) and rt_tgsigqueueinfo(2) syscalls. How such an extension could be implemented has been very roughly sketched in [14], [15], and [16]. However, this should not be taken as a commitment to a particular implementation. There might be better ways to do it. Right now this is intentionally left out to keep this patchset as simple as possible (cf. [4]). /* naming */ The syscall had various names throughout iterations of this patchset: - procfd_signal() - procfd_send_signal() - taskfd_send_signal() In the last round of reviews it was pointed out that given that if the flags argument decides the scope of the signal instead of different types of fds it might make sense to either settle for "procfd_" or "pidfd_" as prefix. The community was willing to accept either (cf. [17] and [18]). Given that one developer expressed strong preference for the "pidfd_" prefix (cf. [13]) and with other developers less opinionated about the name we should settle for "pidfd_" to avoid further bikeshedding. The "_send_signal" suffix was chosen to reflect the fact that the syscall takes on the job of multiple syscalls. It is therefore intentional that the name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the fomer because it might imply that pidfd_send_signal() is a replacement for kill(2), and not the latter because it is a hassle to remember the correct spelling - especially for non-native speakers - and because it is not descriptive enough of what the syscall actually does. The name "pidfd_send_signal" makes it very clear that its job is to send signals. /* zombies */ Zombies can be signaled just as any other process. No special error will be reported since a zombie state is an unreliable state (cf. [3]). However, this can be added as an extension through the @flags argument if the need ever arises. /* cross-namespace signals */ The patch currently enforces that the signaler and signalee either are in the same pid namespace or that the signaler's pid namespace is an ancestor of the signalee's pid namespace. This is done for the sake of simplicity and because it is unclear to what values certain members of struct siginfo_t would need to be set to (cf. [5], [6]). /* compat syscalls */ It became clear that we would like to avoid adding compat syscalls (cf. [7]). The compat syscall handling is now done in kernel/signal.c itself by adding __copy_siginfo_from_user_generic() which lets us avoid compat syscalls (cf. [8]). It should be noted that the addition of __copy_siginfo_from_user_any() is caused by a bug in the original implementation of rt_sigqueueinfo(2) (cf. 12). With upcoming rework for syscall handling things might improve significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain any additional callers. /* testing */ This patch was tested on x64 and x86. /* userspace usage */ An asciinema recording for the basic functionality can be found under [9]. With this patch a process can be killed via: #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags) { #ifdef __NR_pidfd_send_signal return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags); #else return -ENOSYS; #endif } int main(int argc, char *argv[]) { int fd, ret, saved_errno, sig; if (argc < 3) exit(EXIT_FAILURE); fd = open(argv[1], O_DIRECTORY | O_CLOEXEC); if (fd < 0) { printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]); exit(EXIT_FAILURE); } sig = atoi(argv[2]); printf("Sending signal %d to process %s\n", sig, argv[1]); ret = do_pidfd_send_signal(fd, sig, NULL, 0); saved_errno = errno; close(fd); errno = saved_errno; if (ret < 0) { printf("%s - Failed to send signal %d to process %s\n", strerror(errno), sig, argv[1]); exit(EXIT_FAILURE); } exit(EXIT_SUCCESS); } /* Q&A * Given that it seems the same questions get asked again by people who are * late to the party it makes sense to add a Q&A section to the commit * message so it's hopefully easier to avoid duplicate threads. * * For the sake of progress please consider these arguments settled unless * there is a new point that desperately needs to be addressed. Please make * sure to check the links to the threads in this commit message whether * this has not already been covered. */ Q-01: (Florian Weimer [20], Andrew Morton [21]) What happens when the target process has exited? A-01: Sending the signal will fail with ESRCH (cf. [22]). Q-02: (Andrew Morton [21]) Is the task_struct pinned by the fd? A-02: No. A reference to struct pid is kept. struct pid - as far as I understand - was created exactly for the reason to not require to pin struct task_struct (cf. [22]). Q-03: (Andrew Morton [21]) Does the entire procfs directory remain visible? Just one entry within it? A-03: The same thing that happens right now when you hold a file descriptor to /proc/<pid> open (cf. [22]). Q-04: (Andrew Morton [21]) Does the pid remain reserved? A-04: No. This patchset guarantees a stable handle not that pids are not recycled (cf. [22]). Q-05: (Andrew Morton [21]) Do attempts to signal that fd return errors? A-05: See {Q,A}-01. Q-06: (Andrew Morton [22]) Is there a cleaner way of obtaining the fd? Another syscall perhaps. A-06: Userspace can already trivially retrieve file descriptors from procfs so this is something that we will need to support anyway. Hence, there's no immediate need to add another syscalls just to make pidfd_send_signal() not dependent on the presence of procfs. However, adding a syscalls to get such file descriptors is planned for a future patchset (cf. [22]). Q-07: (Andrew Morton [21] and others) This fd-for-a-process sounds like a handy thing and people may well think up other uses for it in the future, probably unrelated to signals. Are the code and the interface designed to permit such future applications? A-07: Yes (cf. [22]). Q-08: (Andrew Morton [21] and others) Now I think about it, why a new syscall? This thing is looking rather like an ioctl? A-08: This has been extensively discussed. It was agreed that a syscall is preferred for a variety or reasons. Here are just a few taken from prior threads. Syscalls are safer than ioctl()s especially when signaling to fds. Processes are a core kernel concept so a syscall seems more appropriate. The layout of the syscall with its four arguments would require the addition of a custom struct for the ioctl() thereby causing at least the same amount or even more complexity for userspace than a simple syscall. The new syscall will replace multiple other pid-based syscalls (see description above). The file-descriptors-for-processes concept introduced with this syscall will be extended with other syscalls in the future. See also [22], [23] and various other threads already linked in here. Q-09: (Florian Weimer [24]) What happens if you use the new interface with an O_PATH descriptor? A-09: pidfds opened as O_PATH fds cannot be used to send signals to a process (cf. [2]). Signaling processes through pidfds is the equivalent of writing to a file. Thus, this is not an operation that operates "purely at the file descriptor level" as required by the open(2) manpage. See also [4]. /* References */ [1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/ [2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/ [3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/ [4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/ [5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/ [6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/ [7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/ [8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/ [9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy [11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/ [12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/ [13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/ [14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/ [15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/ [16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/ [17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/ [18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/ [19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/ [20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/ [22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/ [23]: https://lwn.net/Articles/773459/ [24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/ Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Serge Hallyn <serge@hallyn.com> Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2019-02-13signal: Restore the stop PTRACE_EVENT_EXITEric W. Biederman
In the middle of do_exit() there is there is a call "ptrace_event(PTRACE_EVENT_EXIT, code);" That call places the process in TACKED_TRACED aka "(TASK_WAKEKILL | __TASK_TRACED)" and waits for for the debugger to release the task or SIGKILL to be delivered. Skipping past dequeue_signal when we know a fatal signal has already been delivered resulted in SIGKILL remaining pending and TIF_SIGPENDING remaining set. This in turn caused the scheduler to not sleep in PTACE_EVENT_EXIT as it figured a fatal signal was pending. This also caused ptrace_freeze_traced in ptrace_check_attach to fail because it left a per thread SIGKILL pending which is what fatal_signal_pending tests for. This difference in signal state caused strace to report strace: Exit of unknown pid NNNNN ignored Therefore update the signal handling state like dequeue_signal would when removing a per thread SIGKILL, by removing SIGKILL from the per thread signal mask and clearing TIF_SIGPENDING. Acked-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Ivan Delalande <colona@arista.com> Cc: stable@vger.kernel.org Fixes: 35634ffa1751 ("signal: Always notice exiting tasks") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-07signal: Better detection of synchronous signalsEric W. Biederman
Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. When the stack overflows delivery of SIGHUP fails and force_sigsegv is called. Unfortunately because SIGSEGV is numerically higher than SIGHUP next_signal tries again to deliver a SIGHUP. From a quality of implementation standpoint attempting to deliver the timer SIGHUP signal is wrong. We should attempt to deliver the synchronous SIGSEGV signal we just forced. We can make that happening in a fairly straight forward manner by instead of just looking at the signal number we also look at the si_code. In particular for exceptions (aka synchronous signals) the si_code is always greater than 0. That still has the potential to pick up a number of asynchronous signals as in a few cases the same si_codes that are used for synchronous signals are also used for asynchronous signals, and SI_KERNEL is also included in the list of possible si_codes. Still the heuristic is much better and timer signals are definitely excluded. Which is enough to prevent all known ways for someone sending a process signals fast enough to cause unexpected and arguably incorrect behavior. Cc: stable@vger.kernel.org Fixes: a27341cd5fcb ("Prioritize synchronous signals over 'normal' signals") Tested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-07signal: Always notice exiting tasksEric W. Biederman
Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. Upon examination it turns out part of the problem is actually most of the solution. Since 2.5 signal delivery has found all fatal signals, marked the signal group for death, and queued SIGKILL in every threads thread queue relying on signal->group_exit_code to preserve the information of which was the actual fatal signal. The conversion of all fatal signals to SIGKILL results in the synchronous signal heuristic in next_signal kicking in and preferring SIGHUP to SIGKILL. Which is especially problematic as all fatal signals have already been transformed into SIGKILL. Instead of dequeueing signals and depending upon SIGKILL to be the first signal dequeued, first test if the signal group has already been marked for death. This guarantees that nothing in the signal queue can prevent a process that needs to exit from exiting. Cc: stable@vger.kernel.org Tested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Ref: ebf5ebe31d2c ("[PATCH] signal-fixes-2.5.59-A4") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-07y2038: syscalls: rename y2038 compat syscallsArnd Bergmann
A lot of system calls that pass a time_t somewhere have an implementation using a COMPAT_SYSCALL_DEFINEx() on 64-bit architectures, and have been reworked so that this implementation can now be used on 32-bit architectures as well. The missing step is to redefine them using the regular SYSCALL_DEFINEx() to get them out of the compat namespace and make it possible to build them on 32-bit architectures. Any system call that ends in 'time' gets a '32' suffix on its name for that version, while the others get a '_time32' suffix, to distinguish them from the normal version, which takes a 64-bit time argument in the future. In this step, only 64-bit architectures are changed, doing this rename first lets us avoid touching the 32-bit architectures twice. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-05signal: Always attempt to allocate siginfo for SIGSTOPEric W. Biederman
Since 2.5.34 the code has had the potential to not allocate siginfo for SIGSTOP signals. Except for ptrace this is perfectly fine as only ptrace can use PTRACE_PEEK_SIGINFO and see what the contents of the delivered siginfo are. Users of PTRACE_PEEK_SIGINFO that care about the contents siginfo for SIGSTOP are rare, but they do exist. A seccomp self test has cared and lldb cares. Jack Andersen <jackoalan@gmail.com> writes: > The patch titled > `signal: Never allocate siginfo for SIGKILL or SIGSTOP` > created a regression for users of PTRACE_GETSIGINFO needing to > discern signals that were raised via the tgkill syscall. > > A notable user of this tgkill+ptrace combination is lldb while > debugging a multithreaded program. Without the ability to detect a > SIGSTOP originating from tgkill, lldb does not have a way to > synchronize on a per-thread basis and falls back to SIGSTOP-ing the > entire process. Everyone affected by this please note. The kernel can still fail to allocate a siginfo structure. The allocation is with GFP_KERNEL and is best effort only. If memory is tight when the signal allocation comes in this will fail to allocate a siginfo. So I strongly recommend looking at more robust solutions for synchronizing with a single thread such as PTRACE_INTERRUPT. Or if that does not work persuading your friendly local kernel developer to build the interface you need. Reported-by: Tycho Andersen <tycho@tycho.ws> Reported-by: Kees Cook <keescook@chromium.org> Reported-by: Jack Andersen <jackoalan@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Christian Brauner <christian@brauner.io> Cc: stable@vger.kernel.org Fixes: f149b3155744 ("signal: Never allocate siginfo for SIGKILL or SIGSTOP") Fixes: 6dfc88977e42 ("[PATCH] shared thread signals") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-18y2038: signal: Add compat_sys_rt_sigtimedwait_time64Arnd Bergmann
Now that 32-bit architectures have two variants of sys_rt_sigtimedwaid() for 32-bit and 64-bit time_t, we also need to have a second compat system call entry point on the corresponding 64-bit architectures. The traditional system call keeps getting handled by compat_sys_rt_sigtimedwait(), and this adds a new compat_sys_rt_sigtimedwait_time64() that differs only in the timeout argument type. The naming remains a bit asymmetric for the moment. Ideally we would want to have compat_sys_rt_sigtimedwait_time32() for the old version and compat_sys_rt_sigtimedwait() for the new one to mirror the names of the native entry points, but renaming the existing system call tables causes unnecessary churn. I would suggest renaming all such system calls together at a later point. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-12-18y2038: signal: Add sys_rt_sigtimedwait_time32Arnd Bergmann
Once sys_rt_sigtimedwait() gets changed to a 64-bit time_t, we have to provide compatibility support for existing binaries. An earlier version of this patch reused the compat_sys_rt_sigtimedwait entry point to avoid code duplication, but this newer approach duplicates the existing native entry point instead, which seems a bit cleaner. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-12-06signal: Add restore_user_sigmask()Deepa Dinamani
Refactor the logic to restore the sigmask before the syscall returns into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during the execution and restored after the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-12-06signal: Add set_user_sigmask()Deepa Dinamani
Refactor reading sigset from userspace and updating sigmask into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during, and restored after, the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll, and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Note that the calls to sigprocmask() ignored the return value from the api as the function only returns an error on an invalid first argument that is hardcoded at these call sites. The updated logic uses set_current_blocked() instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>