summaryrefslogtreecommitdiff
path: root/kernel/sysctl.c
AgeCommit message (Collapse)Author
2019-03-12kernel/sysctl.c: define minmax conv functions in terms of non-minmax versionsZev Weiss
do_proc_do[u]intvec_minmax_conv() had included open-coded versions of do_proc_do[u]intvec_conv(); the duplication led to buggy inconsistencies (missing range checks). To reduce the likelihood of such problems in the future, we can instead refactor both to be defined in terms of their non-bounded counterparts (plus the added check). Link: http://lkml.kernel.org/r/20190207165138.5oud57vq4ozwb4kh@hatter.bewilderbeest.net Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12kernel/sysctl.c: add missing range check in do_proc_dointvec_minmax_convZev Weiss
This bug has apparently existed since the introduction of this function in the pre-git era (4500e91754d3 in Thomas Gleixner's history.git, "[NET]: Add proc_dointvec_userhz_jiffies, use it for proper handling of neighbour sysctls."). As a minimal fix we can simply duplicate the corresponding check in do_proc_dointvec_conv(). Link: http://lkml.kernel.org/r/20190207123426.9202-3-zev@bewilderbeest.net Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: <stable@vger.kernel.org> [2.6.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "First batch of fixes in the new merge window: 1) Double dst_cache free in act_tunnel_key, from Wenxu. 2) Avoid NULL deref in IN_DEV_MFORWARD() by failing early in the ip_route_input_rcu() path, from Paolo Abeni. 3) Fix appletalk compile regression, from Arnd Bergmann. 4) If SLAB objects reach the TCP sendpage method we are in serious trouble, so put a debugging check there. From Vasily Averin. 5) Memory leak in hsr layer, from Mao Wenan. 6) Only test GSO type on GSO packets, from Willem de Bruijn. 7) Fix crash in xsk_diag_put_umem(), from Eric Dumazet. 8) Fix VNIC mailbox length in nfp, from Dirk van der Merwe. 9) Fix race in ipv4 route exception handling, from Xin Long. 10) Missing DMA memory barrier in hns3 driver, from Jian Shen. 11) Use after free in __tcf_chain_put(), from Vlad Buslov. 12) Handle inet_csk_reqsk_queue_add() failures, from Guillaume Nault. 13) Return value correction when ip_mc_may_pull() fails, from Eric Dumazet. 14) Use after free in x25_device_event(), also from Eric" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits) gro_cells: make sure device is up in gro_cells_receive() vxlan: test dev->flags & IFF_UP before calling gro_cells_receive() net/x25: fix use-after-free in x25_device_event() isdn: mISDNinfineon: fix potential NULL pointer dereference net: hns3: fix to stop multiple HNS reset due to the AER changes ip: fix ip_mc_may_pull() return value net: keep refcount warning in reqsk_free() net: stmmac: Avoid one more sometimes uninitialized Clang warning net: dsa: mv88e6xxx: Set correct interface mode for CPU/DSA ports rxrpc: Fix client call queueing, waiting for channel tcp: handle inet_csk_reqsk_queue_add() failures net: ethernet: sun: Zero initialize class in default case in niu_add_ethtool_tcam_entry 8139too : Add support for U.S. Robotics USR997901A 10/100 Cardbus NIC fou, fou6: avoid uninit-value in gue_err() and gue6_err() net: sched: fix potential use-after-free in __tcf_chain_put() vhost: silence an unused-variable warning vsock/virtio: fix kernel panic from virtio_transport_reset_no_sock connector: fix unsafe usage of ->real_parent vxlan: do not need BH again in vxlan_cleanup() net: hns3: add dma_rmb() for rx description ...
2019-03-07sysctl: handle overflow for file-maxChristian Brauner
Currently, when writing echo 18446744073709551616 > /proc/sys/fs/file-max /proc/sys/fs/file-max will overflow and be set to 0. That quickly crashes the system. This commit sets the max and min value for file-max. The max value is set to long int. Any higher value cannot currently be used as the percpu counters are long ints and not unsigned integers. Note that the file-max value is ultimately parsed via __do_proc_doulongvec_minmax(). This function does not report error when min or max are exceeded. Which means if a value largen that long int is written userspace will not receive an error instead the old value will be kept. There is an argument to be made that this should be changed and __do_proc_doulongvec_minmax() should return an error when a dedicated min or max value are exceeded. However this has the potential to break userspace so let's defer this to an RFC patch. Link: http://lkml.kernel.org/r/20190107222700.15954-3-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Acked-by: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Waiman Long <longman@redhat.com> [christian@brauner.io: v4] Link: http://lkml.kernel.org/r/20190210203943.8227-3-christian@brauner.io Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07sysctl: handle overflow in proc_get_longChristian Brauner
proc_get_long() is a funny function. It uses simple_strtoul() and for a good reason. proc_get_long() wants to always succeed the parse and return the maybe incorrect value and the trailing characters to check against a pre-defined list of acceptable trailing values. However, simple_strtoul() explicitly ignores overflows which can cause funny things like the following to happen: echo 18446744073709551616 > /proc/sys/fs/file-max cat /proc/sys/fs/file-max 0 (Which will cause your system to silently die behind your back.) On the other hand kstrtoul() does do overflow detection but does not return the trailing characters, and also fails the parse when anything other than '\n' is a trailing character whereas proc_get_long() wants to be more lenient. Now, before adding another kstrtoul() function let's simply add a static parse strtoul_lenient() which: - fails on overflow with -ERANGE - returns the trailing characters to the caller The reason why we should fail on ERANGE is that we already do a partial fail on overflow right now. Namely, when the TMPBUFLEN is exceeded. So we already reject values such as 184467440737095516160 (21 chars) but accept values such as 18446744073709551616 (20 chars) but both are overflows. So we should just always reject 64bit overflows and not special-case this based on the number of chars. Link: http://lkml.kernel.org/r/20190107222700.15954-2-christian@brauner.io Signed-off-by: Christian Brauner <christian@brauner.io> Acked-by: Kees Cook <keescook@chromium.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Waiman Long <longman@redhat.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07bpf: fix sysctl.c warningArnd Bergmann
When CONFIG_BPF_SYSCALL or CONFIG_SYSCTL is disabled, we get a warning about an unused function: kernel/sysctl.c:3331:12: error: 'proc_dointvec_minmax_bpf_stats' defined but not used [-Werror=unused-function] static int proc_dointvec_minmax_bpf_stats(struct ctl_table *table, int write, The CONFIG_BPF_SYSCALL check was already handled, but the SYSCTL check is needed on top. Fixes: 492ecee892c2 ("bpf: enable program stats") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Christian Brauner <christian@brauner.io> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc updates from Andrew Morton: - a few misc things - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (159 commits) tools/testing/selftests/proc/proc-self-syscall.c: remove duplicate include proc: more robust bulk read test proc: test /proc/*/maps, smaps, smaps_rollup, statm proc: use seq_puts() everywhere proc: read kernel cpu stat pointer once proc: remove unused argument in proc_pid_lookup() fs/proc/thread_self.c: code cleanup for proc_setup_thread_self() fs/proc/self.c: code cleanup for proc_setup_self() proc: return exit code 4 for skipped tests mm,mremap: bail out earlier in mremap_to under map pressure mm/sparse: fix a bad comparison mm/memory.c: do_fault: avoid usage of stale vm_area_struct writeback: fix inode cgroup switching comment mm/huge_memory.c: fix "orig_pud" set but not used mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC mm/memcontrol.c: fix bad line in comment mm/cma.c: cma_declare_contiguous: correct err handling mm/page_ext.c: fix an imbalance with kmemleak mm/compaction: pass pgdat to too_many_isolated() instead of zone mm: remove zone_lru_lock() function, access ->lru_lock directly ...
2019-03-06Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - refcount conversions - Solve the rq->leaf_cfs_rq_list can of worms for real. - improve power-aware scheduling - add sysctl knob for Energy Aware Scheduling - documentation updates - misc other changes" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) kthread: Do not use TIMER_IRQSAFE kthread: Convert worker lock to raw spinlock sched/fair: Use non-atomic cpumask_{set,clear}_cpu() sched/fair: Remove unused 'sd' parameter from select_idle_smt() sched/wait: Use freezable_schedule() when possible sched/fair: Prune, fix and simplify the nohz_balancer_kick() comment block sched/fair: Explain LLC nohz kick condition sched/fair: Simplify nohz_balancer_kick() sched/topology: Fix percpu data types in struct sd_data & struct s_data sched/fair: Simplify post_init_entity_util_avg() by calling it with a task_struct pointer argument sched/fair: Fix O(nr_cgroups) in the load balancing path sched/fair: Optimize update_blocked_averages() sched/fair: Fix insertion in rq->leaf_cfs_rq_list sched/fair: Add tmp_alone_branch assertion sched/core: Use READ_ONCE()/WRITE_ONCE() in move_queued_task()/task_rq_lock() sched/debug: Initialize sd_sysctl_cpus if !CONFIG_CPUMASK_OFFSTACK sched/pelt: Skip updating util_est when utilization is higher than CPU's capacity sched/fair: Update scale invariance of PELT sched/fair: Move the rq_of() helper function sched/core: Convert task_struct.stack_refcount to refcount_t ...
2019-03-05mm: remove sysctl_extfrag_handler()Matthew Wilcox
sysctl_extfrag_handler() neglects to propagate the return value from proc_dointvec_minmax() to its caller. It's a wrapper that doesn't need to exist, so just use proc_dointvec_minmax() directly. Link: http://lkml.kernel.org/r/20190104032557.3056-1-willy@infradead.org Signed-off-by: Matthew Wilcox <willy@infradead.org> Reported-by: Aditya Pakki <pakki001@umn.edu> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-01bpf: fix build without bpf_syscallAlexei Starovoitov
wrap bpf_stats_enabled sysctl with #ifdef Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 492ecee892c2 ("bpf: enable program stats") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-27bpf: enable program statsAlexei Starovoitov
JITed BPF programs are indistinguishable from kernel functions, but unlike kernel code BPF code can be changed often. Typical approach of "perf record" + "perf report" profiling and tuning of kernel code works just as well for BPF programs, but kernel code doesn't need to be monitored whereas BPF programs do. Users load and run large amount of BPF programs. These BPF stats allow tools monitor the usage of BPF on the server. The monitoring tools will turn sysctl kernel.bpf_stats_enabled on and off for few seconds to sample average cost of the programs. Aggregated data over hours and days will provide an insight into cost of BPF and alarms can trigger in case given program suddenly gets more expensive. The cost of two sched_clock() per program invocation adds ~20 nsec. Fast BPF progs (like selftests/bpf/progs/test_pkt_access.c) will slow down from ~10 nsec to ~30 nsec. static_key minimizes the cost of the stats collection. There is no measurable difference before/after this patch with kernel.bpf_stats_enabled=0 Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-27sched/topology: Introduce a sysctl for Energy Aware SchedulingQuentin Perret
In its current state, Energy Aware Scheduling (EAS) starts automatically on asymmetric platforms having an Energy Model (EM). However, there are users who want to have an EM (for thermal management for example), but don't want EAS with it. In order to let users disable EAS explicitly, introduce a new sysctl called 'sched_energy_aware'. It is enabled by default so that EAS can start automatically on platforms where it makes sense. Flipping it to 0 rebuilds the scheduling domains and disables EAS. Signed-off-by: Quentin Perret <quentin.perret@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: adharmap@codeaurora.org Cc: chris.redpath@arm.com Cc: currojerez@riseup.net Cc: dietmar.eggemann@arm.com Cc: edubezval@gmail.com Cc: gregkh@linuxfoundation.org Cc: javi.merino@kernel.org Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: morten.rasmussen@arm.com Cc: patrick.bellasi@arm.com Cc: pkondeti@codeaurora.org Cc: rjw@rjwysocki.net Cc: skannan@codeaurora.org Cc: smuckle@google.com Cc: srinivas.pandruvada@linux.intel.com Cc: thara.gopinath@linaro.org Cc: tkjos@google.com Cc: valentin.schneider@arm.com Cc: vincent.guittot@linaro.org Cc: viresh.kumar@linaro.org Link: https://lkml.kernel.org/r/20181203095628.11858-11-quentin.perret@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-04kernel/sysctl: add panic_print into sysctlFeng Tang
So that we can also runtime chose to print out the needed system info for panic, other than setting the kernel cmdline. Link: http://lkml.kernel.org/r/1543398842-19295-3-git-send-email-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04proc/sysctl: fix return error for proc_doulongvec_minmax()Cheng Lin
If the number of input parameters is less than the total parameters, an EINVAL error will be returned. For example, we use proc_doulongvec_minmax to pass up to two parameters with kern_table: { .procname = "monitor_signals", .data = &monitor_sigs, .maxlen = 2*sizeof(unsigned long), .mode = 0644, .proc_handler = proc_doulongvec_minmax, }, Reproduce: When passing two parameters, it's work normal. But passing only one parameter, an error "Invalid argument"(EINVAL) is returned. [root@cl150 ~]# echo 1 2 > /proc/sys/kernel/monitor_signals [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 1 2 [root@cl150 ~]# echo 3 > /proc/sys/kernel/monitor_signals -bash: echo: write error: Invalid argument [root@cl150 ~]# echo $? 1 [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 3 2 [root@cl150 ~]# The following is the result after apply this patch. No error is returned when the number of input parameters is less than the total parameters. [root@cl150 ~]# echo 1 2 > /proc/sys/kernel/monitor_signals [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 1 2 [root@cl150 ~]# echo 3 > /proc/sys/kernel/monitor_signals [root@cl150 ~]# echo $? 0 [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 3 2 [root@cl150 ~]# There are three processing functions dealing with digital parameters, __do_proc_dointvec/__do_proc_douintvec/__do_proc_doulongvec_minmax. This patch deals with __do_proc_doulongvec_minmax, just as __do_proc_dointvec does, adding a check for parameters 'left'. In __do_proc_douintvec, its code implementation explicitly does not support multiple inputs. static int __do_proc_douintvec(...){ ... /* * Arrays are not supported, keep this simple. *Do not* add * support for them. */ if (vleft != 1) { *lenp = 0; return -EINVAL; } ... } So, just __do_proc_doulongvec_minmax has the problem. And most use of proc_doulongvec_minmax/proc_doulongvec_ms_jiffies_minmax just have one parameter. Link: http://lkml.kernel.org/r/1544081775-15720-1-git-send-email-cheng.lin130@zte.com.cn Signed-off-by: Cheng Lin <cheng.lin130@zte.com.cn> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28mm: reclaim small amounts of memory when an external fragmentation event occursMel Gorman
An external fragmentation event was previously described as When the page allocator fragments memory, it records the event using the mm_page_alloc_extfrag event. If the fallback_order is smaller than a pageblock order (order-9 on 64-bit x86) then it's considered an event that will cause external fragmentation issues in the future. The kernel reduces the probability of such events by increasing the watermark sizes by calling set_recommended_min_free_kbytes early in the lifetime of the system. This works reasonably well in general but if there are enough sparsely populated pageblocks then the problem can still occur as enough memory is free overall and kswapd stays asleep. This patch introduces a watermark_boost_factor sysctl that allows a zone watermark to be temporarily boosted when an external fragmentation causing events occurs. The boosting will stall allocations that would decrease free memory below the boosted low watermark and kswapd is woken if the calling context allows to reclaim an amount of memory relative to the size of the high watermark and the watermark_boost_factor until the boost is cleared. When kswapd finishes, it wakes kcompactd at the pageblock order to clean some of the pageblocks that may have been affected by the fragmentation event. kswapd avoids any writeback, slab shrinkage and swap from reclaim context during this operation to avoid excessive system disruption in the name of fragmentation avoidance. Care is taken so that kswapd will do normal reclaim work if the system is really low on memory. This was evaluated using the same workloads as "mm, page_alloc: Spread allocations across zones before introducing fragmentation". 1-socket Skylake machine config-global-dhp__workload_thpfioscale XFS (no special madvise) 4 fio threads, 1 THP allocating thread -------------------------------------- 4.20-rc3 extfrag events < order 9: 804694 4.20-rc3+patch: 408912 (49% reduction) 4.20-rc3+patch1-4: 18421 (98% reduction) 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Amean fault-base-1 653.58 ( 0.00%) 652.71 ( 0.13%) Amean fault-huge-1 0.00 ( 0.00%) 178.93 * -99.00%* 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Percentage huge-1 0.00 ( 0.00%) 5.12 ( 100.00%) Note that external fragmentation causing events are massively reduced by this path whether in comparison to the previous kernel or the vanilla kernel. The fault latency for huge pages appears to be increased but that is only because THP allocations were successful with the patch applied. 1-socket Skylake machine global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE) ----------------------------------------------------------------- 4.20-rc3 extfrag events < order 9: 291392 4.20-rc3+patch: 191187 (34% reduction) 4.20-rc3+patch1-4: 13464 (95% reduction) thpfioscale Fault Latencies 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Min fault-base-1 912.00 ( 0.00%) 905.00 ( 0.77%) Min fault-huge-1 127.00 ( 0.00%) 135.00 ( -6.30%) Amean fault-base-1 1467.55 ( 0.00%) 1481.67 ( -0.96%) Amean fault-huge-1 1127.11 ( 0.00%) 1063.88 * 5.61%* 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Percentage huge-1 77.64 ( 0.00%) 83.46 ( 7.49%) As before, massive reduction in external fragmentation events, some jitter on latencies and an increase in THP allocation success rates. 2-socket Haswell machine config-global-dhp__workload_thpfioscale XFS (no special madvise) 4 fio threads, 5 THP allocating threads ---------------------------------------------------------------- 4.20-rc3 extfrag events < order 9: 215698 4.20-rc3+patch: 200210 (7% reduction) 4.20-rc3+patch1-4: 14263 (93% reduction) 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Amean fault-base-5 1346.45 ( 0.00%) 1306.87 ( 2.94%) Amean fault-huge-5 3418.60 ( 0.00%) 1348.94 ( 60.54%) 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Percentage huge-5 0.78 ( 0.00%) 7.91 ( 910.64%) There is a 93% reduction in fragmentation causing events, there is a big reduction in the huge page fault latency and allocation success rate is higher. 2-socket Haswell machine global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE) ----------------------------------------------------------------- 4.20-rc3 extfrag events < order 9: 166352 4.20-rc3+patch: 147463 (11% reduction) 4.20-rc3+patch1-4: 11095 (93% reduction) thpfioscale Fault Latencies 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Amean fault-base-5 6217.43 ( 0.00%) 7419.67 * -19.34%* Amean fault-huge-5 3163.33 ( 0.00%) 3263.80 ( -3.18%) 4.20.0-rc3 4.20.0-rc3 lowzone-v5r8 boost-v5r8 Percentage huge-5 95.14 ( 0.00%) 87.98 ( -7.53%) There is a large reduction in fragmentation events with some jitter around the latencies and success rates. As before, the high THP allocation success rate does mean the system is under a lot of pressure. However, as the fragmentation events are reduced, it would be expected that the long-term allocation success rate would be higher. Link: http://lkml.kernel.org/r/20181123114528.28802-5-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-03kernel/sysctl.c: remove duplicated includeMichael Schupikov
Remove one include of <linux/pipe_fs_i.h>. No functional changes. Link: http://lkml.kernel.org/r/20181004134223.17735-1-michael@schupikov.de Signed-off-by: Michael Schupikov <michael@schupikov.de> Reviewed-by: Richard Weinberger <richard@nod.at> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-09-04stackleak: Allow runtime disabling of kernel stack erasingAlexander Popov
Introduce CONFIG_STACKLEAK_RUNTIME_DISABLE option, which provides 'stack_erasing' sysctl. It can be used in runtime to control kernel stack erasing for kernels built with CONFIG_GCC_PLUGIN_STACKLEAK. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Alexander Popov <alex.popov@linux.com> Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-08-23namei: allow restricted O_CREAT of FIFOs and regular filesSalvatore Mesoraca
Disallows open of FIFOs or regular files not owned by the user in world writable sticky directories, unless the owner is the same as that of the directory or the file is opened without the O_CREAT flag. The purpose is to make data spoofing attacks harder. This protection can be turned on and off separately for FIFOs and regular files via sysctl, just like the symlinks/hardlinks protection. This patch is based on Openwall's "HARDEN_FIFO" feature by Solar Designer. This is a brief list of old vulnerabilities that could have been prevented by this feature, some of them even allow for privilege escalation: CVE-2000-1134 CVE-2007-3852 CVE-2008-0525 CVE-2009-0416 CVE-2011-4834 CVE-2015-1838 CVE-2015-7442 CVE-2016-7489 This list is not meant to be complete. It's difficult to track down all vulnerabilities of this kind because they were often reported without any mention of this particular attack vector. In fact, before hardlinks/symlinks restrictions, fifos/regular files weren't the favorite vehicle to exploit them. [s.mesoraca16@gmail.com: fix bug reported by Dan Carpenter] Link: https://lkml.kernel.org/r/20180426081456.GA7060@mwanda Link: http://lkml.kernel.org/r/1524829819-11275-1-git-send-email-s.mesoraca16@gmail.com [keescook@chromium.org: drop pr_warn_ratelimited() in favor of audit changes in the future] [keescook@chromium.org: adjust commit subjet] Link: http://lkml.kernel.org/r/20180416175918.GA13494@beast Signed-off-by: Salvatore Mesoraca <s.mesoraca16@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Suggested-by: Solar Designer <solar@openwall.com> Suggested-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22kernel/sysctl.c: fix typos in commentsRandy Dunlap
Fix a few typos/spellos in kernel/sysctl.c. Link: http://lkml.kernel.org/r/bb09a8b9-f984-6dd4-b07b-3ecaf200862e@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: "Luis R. Rodriguez" <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22kernel/hung_task.c: allow to set checking interval separately from timeoutDmitry Vyukov
Currently task hung checking interval is equal to timeout, as the result hung is detected anywhere between timeout and 2*timeout. This is fine for most interactive environments, but this hurts automated testing setups (syzbot). In an automated setup we need to strictly order CPU lockup < RCU stall < workqueue lockup < task hung < silent loss, so that RCU stall is not detected as task hung and task hung is not detected as silent machine loss. The large variance in task hung detection timeout requires setting silent machine loss timeout to a very large value (e.g. if task hung is 3 mins, then silent loss need to be set to ~7 mins). The additional 3 minutes significantly reduce testing efficiency because usually we crash kernel within a minute, and this can add hours to bug localization process as it needs to do dozens of tests. Allow setting checking interval separately from timeout. This allows to set timeout to, say, 3 minutes, but checking interval to 10 secs. The interval is controlled via a new hung_task_check_interval_secs sysctl, similar to the existing hung_task_timeout_secs sysctl. The default value of 0 results in the current behavior: checking interval is equal to timeout. [akpm@linux-foundation.org: update hung_task_timeout_max's comment] Link: http://lkml.kernel.org/r/20180611111004.203513-1-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-16sched/sysctl: Remove unused sched_time_avg_ms sysctlVincent Guittot
/proc/sys/kernel/sched_time_avg_ms entry is not used anywhere, remove it. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-12-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-11kernel/sysctl.c: add kdoc comments to do_proc_do{u}intvec_minmax_conv_paramWaiman Long
Kdoc comments are added to the do_proc_dointvec_minmax_conv_param and do_proc_douintvec_minmax_conv_param structures thare are used internally for range checking. The error codes returned by proc_dointvec_minmax() and proc_douintvec_minmax() are also documented. Link: http://lkml.kernel.org/r/1519926220-7453-3-git-send-email-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Kees Cook <keescook@chromium.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11kernel/sysctl.c: fix sizeof argument to match variable nameRandy Dunlap
Fix sizeof argument to be the same as the data variable name. Probably a copy/paste error. Mostly harmless since both variables are unsigned int. Fixes kernel bugzilla #197371: Possible access to unintended variable in "kernel/sysctl.c" line 1339 https://bugzilla.kernel.org/show_bug.cgi?id=197371 Link: http://lkml.kernel.org/r/e0d0531f-361e-ef5f-8499-32743ba907e1@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Petru Mihancea <petrum@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-20firmware: enable run time change of forcing fallback loaderLuis R. Rodriguez
Currently one requires to test four kernel configurations to test the firmware API completely: 0) CONFIG_FW_LOADER=y 1) o CONFIG_FW_LOADER=y o CONFIG_FW_LOADER_USER_HELPER=y 2) o CONFIG_FW_LOADER=y o CONFIG_FW_LOADER_USER_HELPER=y o CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y 3) When CONFIG_FW_LOADER=m the built-in stuff is disabled, we have no current tests for this. We can reduce the requirements to three kernel configurations by making fw_config.force_sysfs_fallback a proc knob we flip on off. For kernels that disable CONFIG_IKCONFIG_PROC this can also enable one to inspect if CONFIG_FW_LOADER_USER_HELPER_FALLBACK was enabled at build time by checking the proc value at boot time. Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-06pipe: reject F_SETPIPE_SZ with size over UINT_MAXEric Biggers
A pipe's size is represented as an 'unsigned int'. As expected, writing a value greater than UINT_MAX to /proc/sys/fs/pipe-max-size fails with EINVAL. However, the F_SETPIPE_SZ fcntl silently truncates such values to 32 bits, rather than failing with EINVAL as expected. (It *does* fail with EINVAL for values above (1 << 31) but <= UINT_MAX.) Fix this by moving the check against UINT_MAX into round_pipe_size() which is called in both cases. Link: http://lkml.kernel.org/r/20180111052902.14409-6-ebiggers3@gmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06pipe, sysctl: remove pipe_proc_fn()Eric Biggers
pipe_proc_fn() is no longer needed, as it only calls through to proc_dopipe_max_size(). Just put proc_dopipe_max_size() in the ctl_table entry directly, and remove the unneeded EXPORT_SYMBOL() and the ENOSYS stub for it. (The reason the ENOSYS stub isn't needed is that the pipe-max-size ctl_table entry is located directly in 'kern_table' rather than being registered separately. Therefore, the entry is already only defined when the kernel is built with sysctl support.) Link: http://lkml.kernel.org/r/20180111052902.14409-3-ebiggers3@gmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06pipe, sysctl: drop 'min' parameter from pipe-max-size converterEric Biggers
Patch series "pipe: buffer limits fixes and cleanups", v2. This series simplifies the sysctl handler for pipe-max-size and fixes another set of bugs related to the pipe buffer limits: - The root user wasn't allowed to exceed the limits when creating new pipes. - There was an off-by-one error when checking the limits, so a limit of N was actually treated as N - 1. - F_SETPIPE_SZ accepted values over UINT_MAX. - Reading the pipe buffer limits could be racy. This patch (of 7): Before validating the given value against pipe_min_size, do_proc_dopipe_max_size_conv() calls round_pipe_size(), which rounds the value up to pipe_min_size. Therefore, the second check against pipe_min_size is redundant. Remove it. Link: http://lkml.kernel.org/r/20180111052902.14409-2-ebiggers3@gmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31mm, hugetlb: remove hugepages_treat_as_movable sysctlMichal Hocko
hugepages_treat_as_movable has been introduced by 396faf0303d2 ("Allow huge page allocations to use GFP_HIGH_MOVABLE") to allow hugetlb allocations from ZONE_MOVABLE even when hugetlb pages were not migrateable. The purpose of the movable zone was different at the time. It aimed at reducing memory fragmentation and hugetlb pages being long lived and large werre not contributing to the fragmentation so it was acceptable to use the zone back then. Things have changed though and the primary purpose of the zone became migratability guarantee. If we allow non migrateable hugetlb pages to be in ZONE_MOVABLE memory hotplug might fail to offline the memory. Remove the knob and only rely on hugepage_migration_supported to allow movable zones. Mel said: : Primarily it was aimed at allowing the hugetlb pool to safely shrink with : the ability to grow it again. The use case was for batched jobs, some of : which needed huge pages and others that did not but didn't want the memory : useless pinned in the huge pages pool. : : I suspect that more users rely on THP than hugetlbfs for flexible use of : huge pages with fallback options so I think that removing the option : should be ok. Link: http://lkml.kernel.org/r/20171003072619.8654-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Alexandru Moise <00moses.alexander00@gmail.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Alexandru Moise <00moses.alexander00@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17kernel/sysctl.c: code cleanupsOla N. Kaldestad
Remove unnecessary else block, remove redundant return and call to kfree in if block. Link: http://lkml.kernel.org/r/1510238435-1655-1-git-send-email-mail@okal.no Signed-off-by: Ola N. Kaldestad <mail@okal.no> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17sysctl: check for UINT_MAX before unsigned int min/maxJoe Lawrence
Mikulas noticed in the existing do_proc_douintvec_minmax_conv() and do_proc_dopipe_max_size_conv() introduced in this patchset, that they inconsistently handle overflow and min/max range inputs: For example: 0 ... param->min - 1 ---> ERANGE param->min ... param->max ---> the value is accepted param->max + 1 ... 0x100000000L + param->min - 1 ---> ERANGE 0x100000000L + param->min ... 0x100000000L + param->max ---> EINVAL 0x100000000L + param->max + 1, 0x200000000L + param->min - 1 ---> ERANGE 0x200000000L + param->min ... 0x200000000L + param->max ---> EINVAL 0x200000000L + param->max + 1, 0x300000000L + param->min - 1 ---> ERANGE In do_proc_do*() routines which store values into unsigned int variables (4 bytes wide for 64-bit builds), first validate that the input unsigned long value (8 bytes wide for 64-bit builds) will fit inside the smaller unsigned int variable. Then check that the unsigned int value falls inside the specified parameter min, max range. Otherwise the unsigned long -> unsigned int conversion drops leading bits from the input value, leading to the inconsistent pattern Mikulas documented above. Link: http://lkml.kernel.org/r/1507658689-11669-5-git-send-email-joe.lawrence@redhat.com Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17pipe: add proc_dopipe_max_size() to safely assign pipe_max_sizeJoe Lawrence
pipe_max_size is assigned directly via procfs sysctl: static struct ctl_table fs_table[] = { ... { .procname = "pipe-max-size", .data = &pipe_max_size, .maxlen = sizeof(int), .mode = 0644, .proc_handler = &pipe_proc_fn, .extra1 = &pipe_min_size, }, ... int pipe_proc_fn(struct ctl_table *table, int write, void __user *buf, size_t *lenp, loff_t *ppos) { ... ret = proc_dointvec_minmax(table, write, buf, lenp, ppos) ... and then later rounded in-place a few statements later: ... pipe_max_size = round_pipe_size(pipe_max_size); ... This leaves a window of time between initial assignment and rounding that may be visible to other threads. (For example, one thread sets a non-rounded value to pipe_max_size while another reads its value.) Similar reads of pipe_max_size are potentially racy: pipe.c :: alloc_pipe_info() pipe.c :: pipe_set_size() Add a new proc_dopipe_max_size() that consolidates reading the new value from the user buffer, verifying bounds, and calling round_pipe_size() with a single assignment to pipe_max_size. Link: http://lkml.kernel.org/r/1507658689-11669-4-git-send-email-joe.lawrence@redhat.com Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17pipe: match pipe_max_size data type with procfsJoe Lawrence
Patch series "A few round_pipe_size() and pipe-max-size fixups", v3. While backporting Michael's "pipe: fix limit handling" patchset to a distro-kernel, Mikulas noticed that current upstream pipe limit handling contains a few problems: 1 - procfs signed wrap: echo'ing a large number into /proc/sys/fs/pipe-max-size and then cat'ing it back out shows a negative value. 2 - round_pipe_size() nr_pages overflow on 32bit: this would subsequently try roundup_pow_of_two(0), which is undefined. 3 - visible non-rounded pipe-max-size value: there is no mutual exclusion or protection between the time pipe_max_size is assigned a raw value from proc_dointvec_minmax() and when it is rounded. 4 - unsigned long -> unsigned int conversion makes for potential odd return errors from do_proc_douintvec_minmax_conv() and do_proc_dopipe_max_size_conv(). This version underwent the same testing as v1: https://marc.info/?l=linux-kernel&m=150643571406022&w=2 This patch (of 4): pipe_max_size is defined as an unsigned int: unsigned int pipe_max_size = 1048576; but its procfs/sysctl representation is an integer: static struct ctl_table fs_table[] = { ... { .procname = "pipe-max-size", .data = &pipe_max_size, .maxlen = sizeof(int), .mode = 0644, .proc_handler = &pipe_proc_fn, .extra1 = &pipe_min_size, }, ... that is signed: int pipe_proc_fn(struct ctl_table *table, int write, void __user *buf, size_t *lenp, loff_t *ppos) { ... ret = proc_dointvec_minmax(table, write, buf, lenp, ppos) This leads to signed results via procfs for large values of pipe_max_size: % echo 2147483647 >/proc/sys/fs/pipe-max-size % cat /proc/sys/fs/pipe-max-size -2147483648 Use unsigned operations on this variable to avoid such negative values. Link: http://lkml.kernel.org/r/1507658689-11669-2-git-send-email-joe.lawrence@redhat.com Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15mm, sysctl: make NUMA stats configurableKemi Wang
This is the second step which introduces a tunable interface that allow numa stats configurable for optimizing zone_statistics(), as suggested by Dave Hansen and Ying Huang. ========================================================================= When page allocation performance becomes a bottleneck and you can tolerate some possible tool breakage and decreased numa counter precision, you can do: echo 0 > /proc/sys/vm/numa_stat In this case, numa counter update is ignored. We can see about *4.8%*(185->176) drop of cpu cycles per single page allocation and reclaim on Jesper's page_bench01 (single thread) and *8.1%*(343->315) drop of cpu cycles per single page allocation and reclaim on Jesper's page_bench03 (88 threads) running on a 2-Socket Broadwell-based server (88 threads, 126G memory). Benchmark link provided by Jesper D Brouer (increase loop times to 10000000): https://github.com/netoptimizer/prototype-kernel/tree/master/kernel/mm/bench ========================================================================= When page allocation performance is not a bottleneck and you want all tooling to work, you can do: echo 1 > /proc/sys/vm/numa_stat This is system default setting. Many thanks to Michal Hocko, Dave Hansen, Ying Huang and Vlastimil Babka for comments to help improve the original patch. [keescook@chromium.org: make sure mutex is a global static] Link: http://lkml.kernel.org/r/20171107213809.GA4314@beast Link: http://lkml.kernel.org/r/1508290927-8518-1-git-send-email-kemi.wang@intel.com Signed-off-by: Kemi Wang <kemi.wang@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Suggested-by: Dave Hansen <dave.hansen@intel.com> Suggested-by: Ying Huang <ying.huang@intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christopher Lameter <cl@linux.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15kmemcheck: rip it outLevin, Alexander (Sasha Levin)
Fix up makefiles, remove references, and git rm kmemcheck. Link: http://lkml.kernel.org/r/20171007030159.22241-4-alexander.levin@verizon.com Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vegard Nossum <vegardno@ifi.uio.no> Cc: Pekka Enberg <penberg@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexander Potapenko <glider@google.com> Cc: Tim Hansen <devtimhansen@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-14Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...
2017-10-06Merge branch 'core-watchdog-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull watchddog clean-up and fixes from Thomas Gleixner: "The watchdog (hard/softlockup detector) code is pretty much broken in its current state. The patch series addresses this by removing all duct tape and refactoring it into a workable state. The reasons why I ask for inclusion that late in the cycle are: 1) The code causes lockdep splats vs. hotplug locking which get reported over and over. Unfortunately there is no easy fix. 2) The risk of breakage is minimal because it's already broken 3) As 4.14 is a long term stable kernel, I prefer to have working watchdog code in that and the lockdep issues resolved. I wouldn't ask you to pull if 4.14 wouldn't be a LTS kernel or if the solution would be easy to backport. 4) The series was around before the merge window opened, but then got delayed due to the UP failure caused by the for_each_cpu() surprise which we discussed recently. Changes vs. V1: - Addressed your review points - Addressed the warning in the powerpc code which was discovered late - Changed two function names which made sense up to a certain point in the series. Now they match what they do in the end. - Fixed a 'unused variable' warning, which got not detected by the intel robot. I triggered it when trying all possible related config combinations manually. Randconfig testing seems not random enough. The changes have been tested by and reviewed by Don Zickus and tested and acked by Micheal Ellerman for powerpc" * 'core-watchdog-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) watchdog/core: Put softlockup_threads_initialized under ifdef guard watchdog/core: Rename some softlockup_* functions powerpc/watchdog: Make use of watchdog_nmi_probe() watchdog/core, powerpc: Lock cpus across reconfiguration watchdog/core, powerpc: Replace watchdog_nmi_reconfigure() watchdog/hardlockup/perf: Fix spelling mistake: "permanetely" -> "permanently" watchdog/hardlockup/perf: Cure UP damage watchdog/hardlockup: Clean up hotplug locking mess watchdog/hardlockup/perf: Simplify deferred event destroy watchdog/hardlockup/perf: Use new perf CPU enable mechanism watchdog/hardlockup/perf: Implement CPU enable replacement watchdog/hardlockup/perf: Implement init time detection of perf watchdog/hardlockup/perf: Implement init time perf validation watchdog/core: Get rid of the racy update loop watchdog/core, powerpc: Make watchdog_nmi_reconfigure() two stage watchdog/sysctl: Clean up sysctl variable name space watchdog/sysctl: Get rid of the #ifdeffery watchdog/core: Clean up header mess watchdog/core: Further simplify sysctl handling watchdog/core: Get rid of the thread teardown/setup dance ...
2017-10-04sysctl: remove /proc/sys/vm/nr_pdflush_threadsJens Axboe
This tunable has been obsolete since 2.6.32, and writes to the file have been failing and complaining in dmesg since then: nr_pdflush_threads exported in /proc is scheduled for removal That was 8 years ago. Remove the file ABI obsolete notice, and the sysfs file. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-03kernel/sysctl.c: remove duplicate UINT_MAX check on do_proc_douintvec_conv()Luis R. Rodriguez
do_proc_douintvec_conv() has two UINT_MAX checks, we can remove one. This has no functional changes other than fixing a compiler warning: kernel/sysctl.c:2190]: (warning) Identical condition '*lvalp>UINT_MAX', second condition is always false Fixes: 4f2fec00afa60 ("sysctl: simplify unsigned int support") Link: http://lkml.kernel.org/r/20170919072918.12066-1-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reported-by: David Binderman <dcb314@hotmail.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-29sched/sysctl: Check user input value of sysctl_sched_time_avgEthan Zhao
System will hang if user set sysctl_sched_time_avg to 0: [root@XXX ~]# sysctl kernel.sched_time_avg_ms=0 Stack traceback for pid 0 0xffff883f6406c600 0 0 1 3 R 0xffff883f6406cf50 *swapper/3 ffff883f7ccc3ae8 0000000000000018 ffffffff810c4dd0 0000000000000000 0000000000017800 ffff883f7ccc3d78 0000000000000003 ffff883f7ccc3bf8 ffffffff810c4fc9 ffff883f7ccc3c08 00000000810c5043 ffff883f7ccc3c08 Call Trace: <IRQ> [<ffffffff810c4dd0>] ? update_group_capacity+0x110/0x200 [<ffffffff810c4fc9>] ? update_sd_lb_stats+0x109/0x600 [<ffffffff810c5507>] ? find_busiest_group+0x47/0x530 [<ffffffff810c5b84>] ? load_balance+0x194/0x900 [<ffffffff810ad5ca>] ? update_rq_clock.part.83+0x1a/0xe0 [<ffffffff810c6d42>] ? rebalance_domains+0x152/0x290 [<ffffffff810c6f5c>] ? run_rebalance_domains+0xdc/0x1d0 [<ffffffff8108a75b>] ? __do_softirq+0xfb/0x320 [<ffffffff8108ac85>] ? irq_exit+0x125/0x130 [<ffffffff810b3a17>] ? scheduler_ipi+0x97/0x160 [<ffffffff81052709>] ? smp_reschedule_interrupt+0x29/0x30 [<ffffffff8173a1be>] ? reschedule_interrupt+0x6e/0x80 <EOI> [<ffffffff815bc83c>] ? cpuidle_enter_state+0xcc/0x230 [<ffffffff815bc80c>] ? cpuidle_enter_state+0x9c/0x230 [<ffffffff815bc9d7>] ? cpuidle_enter+0x17/0x20 [<ffffffff810cd6dc>] ? cpu_startup_entry+0x38c/0x420 [<ffffffff81053373>] ? start_secondary+0x173/0x1e0 Because divide-by-zero error happens in function: update_group_capacity() update_cpu_capacity() scale_rt_capacity() { ... total = sched_avg_period() + delta; used = div_u64(avg, total); ... } To fix this issue, check user input value of sysctl_sched_time_avg, keep it unchanged when hitting invalid input, and set the minimum limit of sysctl_sched_time_avg to 1 ms. Reported-by: James Puthukattukaran <james.puthukattukaran@oracle.com> Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: efault@gmx.de Cc: ethan.kernel@gmail.com Cc: keescook@chromium.org Cc: mcgrof@kernel.org Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1504504774-18253-1-git-send-email-ethan.zhao@oracle.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-14watchdog/sysctl: Clean up sysctl variable name spaceThomas Gleixner
Reflect that these variables are user interface related and remove the whitespace damage in the sysctl table while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Don Zickus <dzickus@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Ulrich Obergfell <uobergfe@redhat.com> Link: http://lkml.kernel.org/r/20170912194147.783210221@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-14watchdog/sysctl: Get rid of the #ifdefferyThomas Gleixner
The sysctl of the nmi_watchdog file prevents writes by setting: min = max = 0 if none of the users is enabled. That involves ifdeffery and is competely non obvious. If none of the facilities is enabeld, then the file can simply be made read only. Move the ifdeffery into the header and use a constant for file permissions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Don Zickus <dzickus@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Ulrich Obergfell <uobergfe@redhat.com> Link: http://lkml.kernel.org/r/20170912194147.706073616@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-12kernel/watchdog: split up config optionsNicholas Piggin
Split SOFTLOCKUP_DETECTOR from LOCKUP_DETECTOR, and split HARDLOCKUP_DETECTOR_PERF from HARDLOCKUP_DETECTOR. LOCKUP_DETECTOR implies the general boot, sysctl, and programming interfaces for the lockup detectors. An architecture that wants to use a hard lockup detector must define HAVE_HARDLOCKUP_DETECTOR_PERF or HAVE_HARDLOCKUP_DETECTOR_ARCH. Alternatively an arch can define HAVE_NMI_WATCHDOG, which provides the minimum arch_touch_nmi_watchdog, and it otherwise does its own thing and does not implement the LOCKUP_DETECTOR interfaces. sparc is unusual in that it has started to implement some of the interfaces, but not fully yet. It should probably be converted to a full HAVE_HARDLOCKUP_DETECTOR_ARCH. [npiggin@gmail.com: fix] Link: http://lkml.kernel.org/r/20170617223522.66c0ad88@roar.ozlabs.ibm.com Link: http://lkml.kernel.org/r/20170616065715.18390-4-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Don Zickus <dzickus@redhat.com> Reviewed-by: Babu Moger <babu.moger@oracle.com> Tested-by: Babu Moger <babu.moger@oracle.com> [sparc] Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12sysctl: add unsigned int range supportLuis R. Rodriguez
To keep parity with regular int interfaces provide the an unsigned int proc_douintvec_minmax() which allows you to specify a range of allowed valid numbers. Adding proc_douintvec_minmax_sysadmin() is easy but we can wait for an actual user for that. Link: http://lkml.kernel.org/r/20170519033554.18592-6-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Kees Cook <keescook@chromium.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12sysctl: simplify unsigned int supportLuis R. Rodriguez
Commit e7d316a02f68 ("sysctl: handle error writing UINT_MAX to u32 fields") added proc_douintvec() to start help adding support for unsigned int, this however was only half the work needed. Two fixes have come in since then for the following issues: o Printing the values shows a negative value, this happens since do_proc_dointvec() and this uses proc_put_long() This was fixed by commit 5380e5644afbba9 ("sysctl: don't print negative flag for proc_douintvec"). o We can easily wrap around the int values: UINT_MAX is 4294967295, if we echo in 4294967295 + 1 we end up with 0, using 4294967295 + 2 we end up with 1. o We echo negative values in and they are accepted This was fixed by commit 425fffd886ba ("sysctl: report EINVAL if value is larger than UINT_MAX for proc_douintvec"). It still also failed to be added to sysctl_check_table()... instead of adding it with the current implementation just provide a proper and simplified unsigned int support without any array unsigned int support with no negative support at all. Historically sysctl proc helpers have supported arrays, due to the complexity this adds though we've taken a step back to evaluate array users to determine if its worth upkeeping for unsigned int. An evaluation using Coccinelle has been done to perform a grammatical search to ask ourselves: o How many sysctl proc_dointvec() (int) users exist which likely should be moved over to proc_douintvec() (unsigned int) ? Answer: about 8 - Of these how many are array users ? Answer: Probably only 1 o How many sysctl array users exist ? Answer: about 12 This last question gives us an idea just how popular arrays: they are not. Array support should probably just be kept for strings. The identified uint ports are: drivers/infiniband/core/ucma.c - max_backlog drivers/infiniband/core/iwcm.c - default_backlog net/core/sysctl_net_core.c - rps_sock_flow_sysctl() net/netfilter/nf_conntrack_timestamp.c - nf_conntrack_timestamp -- bool net/netfilter/nf_conntrack_acct.c nf_conntrack_acct -- bool net/netfilter/nf_conntrack_ecache.c - nf_conntrack_events -- bool net/netfilter/nf_conntrack_helper.c - nf_conntrack_helper -- bool net/phonet/sysctl.c proc_local_port_range() The only possible array users is proc_local_port_range() but it does not seem worth it to add array support just for this given the range support works just as well. Unsigned int support should be desirable more for when you *need* more than INT_MAX or using int min/max support then does not suffice for your ranges. If you forget and by mistake happen to register an unsigned int proc entry with an array, the driver will fail and you will get something as follows: sysctl table check failed: debug/test_sysctl//uint_0002 array now allowed CPU: 2 PID: 1342 Comm: modprobe Tainted: G W E <etc> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS <etc> Call Trace: dump_stack+0x63/0x81 __register_sysctl_table+0x350/0x650 ? kmem_cache_alloc_trace+0x107/0x240 __register_sysctl_paths+0x1b3/0x1e0 ? 0xffffffffc005f000 register_sysctl_table+0x1f/0x30 test_sysctl_init+0x10/0x1000 [test_sysctl] do_one_initcall+0x52/0x1a0 ? kmem_cache_alloc_trace+0x107/0x240 do_init_module+0x5f/0x200 load_module+0x1867/0x1bd0 ? __symbol_put+0x60/0x60 SYSC_finit_module+0xdf/0x110 SyS_finit_module+0xe/0x10 entry_SYSCALL_64_fastpath+0x1e/0xad RIP: 0033:0x7f042b22d119 <etc> Fixes: e7d316a02f68 ("sysctl: handle error writing UINT_MAX to u32 fields") Link: http://lkml.kernel.org/r/20170519033554.18592-5-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Suggested-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Liping Zhang <zlpnobody@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Kees Cook <keescook@chromium.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12sysctl: fold sysctl_writes_strict checks into helperLuis R. Rodriguez
The mode sysctl_writes_strict positional checks keep being copy and pasted as we add new proc handlers. Just add a helper to avoid code duplication. Link: http://lkml.kernel.org/r/20170519033554.18592-4-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Suggested-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12sysctl: kdoc'ify sysctl_writes_strictLuis R. Rodriguez
Document the different sysctl_writes_strict modes in code. Link: http://lkml.kernel.org/r/20170519033554.18592-3-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08proc/sysctl: fix the int overflow for jiffies conversionGao Feng
do_proc_dointvec_jiffies_conv() uses LONG_MAX/HZ as the max value to avoid overflow. But actually the *valp is int type, so it still causes overflow. For example, echo 2147483647 > ./sys/net/ipv4/tcp_keepalive_time Then, cat ./sys/net/ipv4/tcp_keepalive_time The output is "-1", it is not expected. Now use INT_MAX/HZ as the max value instead LONG_MAX/HZ to fix it. Link: http://lkml.kernel.org/r/1490109532-9228-1-git-send-email-fgao@ikuai8.com Signed-off-by: Gao Feng <fgao@ikuai8.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-01Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timer departement delivers: - more year 2038 rework - a massive rework of the arm achitected timer - preparatory patches to allow NTP correction of clock event devices to avoid early expiry - the usual pile of fixes and enhancements all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits) timer/sysclt: Restrict timer migration sysctl values to 0 and 1 arm64/arch_timer: Mark errata handlers as __maybe_unused Clocksource/mips-gic: Remove redundant non devicetree init MIPS/Malta: Probe gic-timer via devicetree clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver clocksource: arm_arch_timer: add GTDT support for memory-mapped timer acpi/arm64: Add memory-mapped timer support in GTDT driver clocksource: arm_arch_timer: simplify ACPI support code. acpi/arm64: Add GTDT table parse driver clocksource: arm_arch_timer: split MMIO timer probing. clocksource: arm_arch_timer: add structs to describe MMIO timer clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init call clocksource: arm_arch_timer: refactor arch_timer_needs_probing clocksource: arm_arch_timer: split dt-only rate handling x86/uv/time: Set ->min_delta_ticks and ->max_delta_ticks unicore32/time: Set ->min_delta_ticks and ->max_delta_ticks um/time: Set ->min_delta_ticks and ->max_delta_ticks tile/time: Set ->min_delta_ticks and ->max_delta_ticks score/time: Set ->min_delta_ticks and ->max_delta_ticks ...
2017-04-20timer/sysclt: Restrict timer migration sysctl values to 0 and 1Myungho Jung
timer_migration sysctl acts as a boolean switch, so the allowed values should be restricted to 0 and 1. Add the necessary extra fields to the sysctl table entry to enforce that. [ tglx: Rewrote changelog ] Signed-off-by: Myungho Jung <mhjungk@gmail.com> Link: http://lkml.kernel.org/r/1492640690-3550-1-git-send-email-mhjungk@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>