summaryrefslogtreecommitdiff
path: root/kernel/time/tick-broadcast.c
AgeCommit message (Collapse)Author
2012-04-19tick: Fix the spurious broadcast timer ticks after resumeSuresh Siddha
During resume, tick_resume_broadcast() programs the broadcast timer in oneshot mode unconditionally. On the platforms where broadcast timer is not really required, this will generate spurious broadcast timer ticks upon resume. For example, on the always running apic timer platforms with HPET, I see spurious hpet tick once every ~5minutes (which is the 32-bit hpet counter wraparound time). Similar to boot time, during resume make the oneshot mode setting of the broadcast clock event device conditional on the state of active broadcast users. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: svenjoac@gmx.de Cc: torvalds@linux-foundation.org Cc: rjw@sisk.pl Link: http://lkml.kernel.org/r/1334802459.28674.209.camel@sbsiddha-desk.sc.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-04-19tick: Ensure that the broadcast device is initializedThomas Gleixner
Santosh found another trap when we avoid to initialize the broadcast device in the switch_to_oneshot code. The broadcast device might be still in SHUTDOWN state when we actually need to use it. That obviously breaks, as set_next_event() is called on a shutdown device. This did not break on x86, but Suresh analyzed it: From the review, most likely on Sven's system we are force enabling the hpet using the pci quirk's method very late. And in this case, hpet_clockevent (which will be global_clock_event) handler can be null, specifically as this platform might not be using deeper c-states and using the reliable APIC timer. Prior to commit 'fa4da365bc7772c', that handler will be set to 'tick_handle_oneshot_broadcast' when we switch the broadcast timer to oneshot mode, even though we don't use it. Post commit 'fa4da365bc7772c', we stopped switching the broadcast mode to oneshot as this is not really needed and his platform's global_clock_event's handler will remain null. While on my SNB laptop, same is set to 'clockevents_handle_noop' because hpet gets enabled very early. (noop handler on my platform set when the early enabled hpet timer gets replaced by the lapic timer). But the commit 'fa4da365bc7772c' tracked the broadcast timer mode in the SW as oneshot, even though it didn't touch the HW timer. During resume however, tick_resume_broadcast() saw the SW broadcast mode as oneshot and actually programmed the broadcast device also into oneshot mode. So this triggered the null pointer de-reference after the hpet wraps around and depending on what the hpet counter is set to. On the normal platforms where hpet gets enabled early we should be seeing a spurious interrupt (in my SNB laptop I see one spurious interrupt after around 5 minutes ;) which is 32-bit hpet counter wraparound time), but that's a separate issue. Enforce the mode setting when trying to set an event. Reported-and-tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: torvalds@linux-foundation.org Cc: svenjoac@gmx.de Cc: rjw@sisk.pl Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1204181723350.2542@ionos
2012-04-18tick: Fix oneshot broadcast setup reallyThomas Gleixner
Sven Joachim reported, that suspend/resume on rc3 trips over a NULL pointer dereference. Linus spotted the clockevent handler being NULL. commit fa4da365b(clockevents: tTack broadcast device mode change in tick_broadcast_switch_to_oneshot()) tried to fix a problem with the broadcast device setup, which was introduced in commit 77b0d60c5( clockevents: Leave the broadcast device in shutdown mode when not needed). The initial commit avoided to set up the broadcast device when no broadcast request bits were set, but that left the broadcast device disfunctional. In consequence deep idle states which need the broadcast device were not woken up. commit fa4da365b tried to fix that by initializing the state of the broadcast facility, but that missed the fact, that nothing initializes the event handler and some other state of the underlying clock event device. The fix is to revert both commits and make only the mode setting of the clock event device conditional on the state of active broadcast users. That initializes everything except the low level device mode, but this happens when the broadcast functionality is invoked by deep idle. Reported-and-tested-by: Sven Joachim <svenjoac@gmx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1204181205540.2542@ionos
2012-04-10clockevents: tTack broadcast device mode change in ↵Suresh Siddha
tick_broadcast_switch_to_oneshot() In the commit 77b0d60c5adf39c74039e2142a1d3cd1e4d53799, "clockevents: Leave the broadcast device in shutdown mode when not needed", we were bailing out too quickly in tick_broadcast_switch_to_oneshot(), with out tracking the broadcast device mode change to 'TICKDEV_MODE_ONESHOT'. This breaks the platforms which need broadcast device oneshot services during deep idle states. tick_broadcast_oneshot_control() thinks that it is in periodic mode and fails to take proper decisions based on the CLOCK_EVT_NOTIFY_BROADCAST_[ENTER, EXIT] notifications during deep idle entry/exit. Fix this by tracking the broadcast device mode as 'TICKDEV_MODE_ONESHOT', before leaving the broadcast HW device in shutdown mode if there are no active requests for the moment. Reported-and-tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: johnstul@us.ibm.com Link: http://lkml.kernel.org/r/1334011304.12400.81.camel@sbsiddha-desk.sc.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-02-15clockevents: Leave the broadcast device in shutdown mode when not neededSuresh Siddha
Platforms with Always Running APIC Timer doesn't use the broadcast timer but the kernel is leaving the broadcast timer (HPET in this case) in oneshot mode. On these platforms, before the switch to oneshot mode, broadcast device is actually in shutdown mode. Code checks for empty tick_broadcast_mask and avoids going into the periodic mode. During switch to oneshot mode, add the same tick_broadcast_mask checks in the tick_broadcast_switch_to_oneshot() and avoid the broadcast device going into the oneshot mode. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: john stultz <johnstul@us.ibm.com> Cc: venki@google.com Link: http://lkml.kernel.org/r/1320452301.15071.16.camel@sbsiddha-desk.sc.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-12-02tick-broadcast: Stop active broadcast device when replacing itThomas Gleixner
When a better rated broadcast device is installed, then the current active device is not disabled, which results in two running broadcast devices. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org
2011-09-08clockevents: Make minimum delay adjustments configurableMartin Schwidefsky
The automatic increase of the min_delta_ns of a clockevents device should be done in the clockevents code as the minimum delay is an attribute of the clockevents device. In addition not all architectures want the automatic adjustment, on a massively virtualized system it can happen that the programming of a clock event fails several times in a row because the virtual cpu has been rescheduled quickly enough. In that case the minimum delay will erroneously be increased with no way back. The new config symbol GENERIC_CLOCKEVENTS_MIN_ADJUST is used to enable the automatic adjustment. The config option is selected only for x86. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: john stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/20110823133142.494157493@de.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-20Merge branch 'timers/urgent' into timers/coreThomas Gleixner
Reason: Get upstream fixes and kfree_rcu which is necessary for a follow up patch. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-16tick: Clear broadcast active bit when switching to oneshotThomas Gleixner
The first cpu which switches from periodic to oneshot mode switches also the broadcast device into oneshot mode. The broadcast device serves as a backup for per cpu timers which stop in deeper C-states. To avoid starvation of the cpus which might be in idle and depend on broadcast mode it marks the other cpus as broadcast active and sets the brodcast expiry value of those cpus to the next tick. The oneshot mode broadcast bit for the other cpus is sticky and gets only cleared when those cpus exit idle. If a cpu was not idle while the bit got set in consequence the bit prevents that the broadcast device is armed on behalf of that cpu when it enters idle for the first time after it switched to oneshot mode. In most cases that goes unnoticed as one of the other cpus has usually a timer pending which keeps the broadcast device armed with a short timeout. Now if the only cpu which has a short timer active has the bit set then the broadcast device will not be armed on behalf of that cpu and will fire way after the expected timer expiry. In the case of Christians bug report it took ~145 seconds which is about half of the wrap around time of HPET (the limit for that device) due to the fact that all other cpus had no timers armed which expired before the 145 seconds timeframe. The solution is simply to clear the broadcast active bit unconditionally when a cpu switches to oneshot mode after the first cpu switched the broadcast device over. It's not idle at that point otherwise it would not be executing that code. [ I fundamentally hate that broadcast crap. Why the heck thought some folks that when going into deep idle it's a brilliant concept to switch off the last device which brings the cpu back from that state? ] Thanks to Christian for providing all the valuable debug information! Reported-and-tested-by: Christian Hoffmann <email@christianhoffmann.info> Cc: John Stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/%3Calpine.LFD.2.02.1105161105170.3078%40ionos%3E Cc: stable@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-05clockevents: Move C3 stop test outside lockAndi Kleen
Avoid taking broadcast_lock in the idle path for systems where the timer doesn't stop in C3. [ tglx: Removed the stale label and added comment ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Dave Kleikamp <dkleikamp@gmail.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: lenb@kernel.org Cc: paulmck@us.ibm.com Link: http://lkml.kernel.org/r/%3C20110504234806.GF2925%40one.firstfloor.org%3E Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-15Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (62 commits) posix-clocks: Check write permissions in posix syscalls hrtimer: Remove empty hrtimer_init_hres_timer() hrtimer: Update hrtimer->state documentation hrtimer: Update base[CLOCK_BOOTTIME].offset correctly timers: Export CLOCK_BOOTTIME via the posix timers interface timers: Add CLOCK_BOOTTIME hrtimer base time: Extend get_xtime_and_monotonic_offset() to also return sleep time: Introduce get_monotonic_boottime and ktime_get_boottime hrtimers: extend hrtimer base code to handle more then 2 clockids ntp: Remove redundant and incorrect parameter check mn10300: Switch do_timer() to xtimer_update() posix clocks: Introduce dynamic clocks posix-timers: Cleanup namespace posix-timers: Add support for fd based clocks x86: Add clock_adjtime for x86 posix-timers: Introduce a syscall for clock tuning. time: Splitout compat timex accessors ntp: Add ADJ_SETOFFSET mode bit time: Introduce timekeeping_inject_offset posix-timer: Update comment ... Fix up new system-call-related conflicts in arch/x86/ia32/ia32entry.S arch/x86/include/asm/unistd_32.h arch/x86/include/asm/unistd_64.h arch/x86/kernel/syscall_table_32.S (name_to_handle_at()/open_by_handle_at() vs clock_adjtime()), and some due to movement of get_jiffies_64() in: kernel/time.c
2011-02-26clockevents: Prevent oneshot mode when broadcast device is periodicThomas Gleixner
When the per cpu timer is marked CLOCK_EVT_FEAT_C3STOP, then we only can switch into oneshot mode, when the backup broadcast device supports oneshot mode as well. Otherwise we would try to switch the broadcast device into an unsupported mode unconditionally. This went unnoticed so far as the current available broadcast devices support oneshot mode. Seth unearthed this problem while debugging and working around an hpet related BIOS wreckage. Add the necessary check to tick_is_oneshot_available(). Reported-and-tested-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <alpine.LFD.2.00.1102252231200.2701@localhost6.localdomain6> Cc: stable@kernel.org # .21 ->
2011-01-31time: Make do_timer() and xtime_lock local to kernel/time/Torben Hohn
All callers of do_timer() are converted to xtime_update(). The only users of xtime_lock are in kernel/time/. Make both local to kernel/time/ and remove them from the global header files. [ tglx: Reuse tick-internal.h instead of creating another local header file. Massaged changelog ] Signed-off-by: Torben Hohn <torbenh@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: johnstul@us.ibm.com Cc: yong.zhang0@gmail.com Cc: hch@infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-07-11fix comment/printk typos concerning "already"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-14clockevents: Convert to raw_spinlockThomas Gleixner
Convert locks which cannot be sleeping locks in preempt-rt to raw_spinlocks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-08-19clockevent: Prevent dead lock on clockevents_lockSuresh Siddha
Currently clockevents_notify() is called with interrupts enabled at some places and interrupts disabled at some other places. This results in a deadlock in this scenario. cpu A holds clockevents_lock in clockevents_notify() with irqs enabled cpu B waits for clockevents_lock in clockevents_notify() with irqs disabled cpu C doing set_mtrr() which will try to rendezvous of all the cpus. This will result in C and A come to the rendezvous point and waiting for B. B is stuck forever waiting for the spinlock and thus not reaching the rendezvous point. Fix the clockevents code so that clockevents_lock is taken with interrupts disabled and thus avoid the above deadlock. Also call lapic_timer_propagate_broadcast() on the destination cpu so that we avoid calling smp_call_function() in the clockevents notifier chain. This issue left us wondering if we need to change the MTRR rendezvous logic to use stop machine logic (instead of smp_call_function) or add a check in spinlock debug code to see if there are other spinlocks which gets taken under both interrupts enabled/disabled conditions. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: "Pallipadi Venkatesh" <venkatesh.pallipadi@intel.com> Cc: "Brown Len" <len.brown@intel.com> LKML-Reference: <1250544899.2709.210.camel@sbs-t61.sc.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-02clockevents: tick_broadcast_device can become staticDmitri Vorobiev
The variable tick_broadcast_device is not used outside of the file where it is defined, so let's make it static. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-01-01cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/Rusty Russell
Impact: cleanup Simple replacement, now the _nr is redundant. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Cc: Ingo Molnar <mingo@redhat.com>
2009-01-01cpumask: convert kernel time functionsRusty Russell
Impact: Use new APIs Convert kernel/time functions to use struct cpumask *. Note the ugly bitmap declarations in tick-broadcast.c. These should be cpumask_var_t, but there was no obvious initialization function to put the alloc_cpumask_var() calls in. This was safe. (Eventually 'struct cpumask' will be undefined for CONFIG_CPUMASK_OFFSTACK, so we use a bitmap here to show we really mean it). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com>
2008-12-13cpumask: convert struct clock_event_device to cpumask pointers.Rusty Russell
Impact: change calling convention of existing clock_event APIs struct clock_event_timer's cpumask field gets changed to take pointer, as does the ->broadcast function. Another single-patch change. For safety, we BUG_ON() in clockevents_register_device() if it's not set. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu>
2008-10-17NOHZ: restart tick device from irq_enter()Thomas Gleixner
We did not restart the tick device from irq_enter() to avoid double reprogramming and extra events in the return immediate to idle case. But long lasting softirqs can lead to a situation where jiffies become stale: idle() tick stopped (reprogrammed to next pending timer) halt() interrupt jiffies updated from irq_enter() interrupt handler softirq function 1 runs 20ms softirq function 2 arms a 10ms timer with a stale jiffies value jiffies updated from irq_exit() timer wheel has now an already expired timer (the one added in function 2) timer fires and timer softirq runs This was discovered when debugging a timer problem which happend only when the ath5k driver is active. The debugging proved that there is a softirq function running for more than 20ms, which is a bug by itself. To solve this we restart the tick timer right from irq_enter(), but do not go through the other functions which are necessary to return from idle when need_resched() is set. Reported-by: Elias Oltmanns <eo@nebensachen.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Elias Oltmanns <eo@nebensachen.de>
2008-10-04clockevents: check broadcast tick device not the clock events deviceThomas Gleixner
Impact: jiffies increment too fast. Hugh Dickins noted that with NOHZ=n and HIGHRES=n jiffies get incremented too fast. The reason is a wrong check in the broadcast enter/exit code, which keeps the local apic timer in periodic mode when the switch happens. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-23clockevents: prevent mode mismatch on cpu onlineThomas Gleixner
Impact: timer hang on CPU online observed on AMD C1E systems When a CPU is brought online then the broadcast machinery can be in the one shot state already. Check this and setup the timer device of the new CPU in one shot mode so the broadcast code can pick up the next_event value correctly. Another AMD C1E oddity, as we switch to broadcast immediately and not after the full bring up via the ACPI cpu idle code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-23clockevents: check broadcast device not tick deviceThomas Gleixner
Impact: Possible hang on CPU online observed on AMD C1E machines. The broadcast setup code looks at the mode of the tick device to determine whether it needs to be shut down or setup. This is wrong when the broadcast mode is set to one shot already. This can happen when a CPU is brought online as it goes through the periodic setup first. The problem went unnoticed as sane systems do not call into that code before the switch to one shot for the clock event device happens. The AMD C1E idle routine switches over immediately and thereby shuts down the just setup device before the first interrupt happens. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-16clockevents: make device shutdown robustThomas Gleixner
The device shut down does not cleanup the next_event variable of the clock event device. So when the device is reactivated the possible stale next_event value can prevent the device to be reprogrammed as it claims to wait on a event already. This is the root cause of the resurfacing suspend/resume problem, where systems need key press to come back to life. Fix this by setting next_event to KTIME_MAX when the device is shut down. Use a separate function for shutdown which takes care of that and only keep the direct set mode call in the broadcast code, where we can not touch the next_event value. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-06clockevents: broadcast fixup possible waitersThomas Gleixner
Until the C1E patches arrived there where no users of periodic broadcast before switching to oneshot mode. Now we need to trigger a possible waiter for a periodic broadcast when switching to oneshot mode. Otherwise we can starve them for ever. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-05clockevents: prevent endless loop lockupThomas Gleixner
The C1E/HPET bug reports on AMDX2/RS690 systems where tracked down to a too small value of the HPET minumum delta for programming an event. The clockevents code needs to enforce an interrupt event on the clock event device in some cases. The enforcement code was stupid and naive, as it just added the minimum delta to the current time and tried to reprogram the device. When the minimum delta is too small, then this loops forever. Add a sanity check. Allow reprogramming to fail 3 times, then print a warning and double the minimum delta value to make sure, that this does not happen again. Use the same function for both tick-oneshot and tick-broadcast code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05clockevents: prevent multiple init/shutdownThomas Gleixner
While chasing the C1E/HPET bugreports I went through the clock events code inch by inch and found that the broadcast device can be initialized and shutdown multiple times. Multiple shutdowns are not critical, but useless waste of time. Multiple initializations are simply broken. Another CPU might have the device in use already after the first initialization and the second init could just render it unusable again. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05clockevents: prevent endless loop in periodic broadcast handlerThomas Gleixner
The reprogramming of the periodic broadcast handler was broken, when the first programming returned -ETIME. The clockevents code stores the new expiry value in the clock events device next_event field only when the programming time has not been elapsed yet. The loop in question calculates the new expiry value from the next_event value and therefor never increases. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16Merge branch 'linus' into cpus4096Ingo Molnar
Conflicts: arch/x86/xen/smp.c kernel/sched_rt.c net/iucv/iucv.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15Merge branch 'generic-ipi' into generic-ipi-for-linusIngo Molnar
Conflicts: arch/powerpc/Kconfig arch/s390/kernel/time.c arch/x86/kernel/apic_32.c arch/x86/kernel/cpu/perfctr-watchdog.c arch/x86/kernel/i8259_64.c arch/x86/kernel/ldt.c arch/x86/kernel/nmi_64.c arch/x86/kernel/smpboot.c arch/x86/xen/smp.c include/asm-x86/hw_irq_32.h include/asm-x86/hw_irq_64.h include/asm-x86/mach-default/irq_vectors.h include/asm-x86/mach-voyager/irq_vectors.h include/asm-x86/smp.h kernel/Makefile Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86, clockevents: add C1E aware idle functionThomas Gleixner
C1E on AMD machines is like C3 but without control from the OS. Up to now we disabled the local apic timer for those machines as it stops when the CPU goes into C1E. This excludes those machines from high resolution timers / dynamic ticks, which hurts especially X2 based laptops. The current boot time C1E detection has another, more serious flaw as well: some BIOSes do not enable C1E until the ACPI processor module is loaded. This causes systems to stop working after that point. To work nicely with C1E enabled machines we use a separate idle function, which checks on idle entry whether C1E was enabled in the Interrupt Pending Message MSR. This allows us to do timer broadcasting for C1E and covers the late enablement of C1E as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-26smp_call_function: get rid of the unused nonatomic/retry argumentJens Axboe
It's never used and the comments refer to nonatomic and retry interchangably. So get rid of it. Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-05-23clocksource/events: use performance variant for_each_cpu_mask_nrMike Travis
Change references from for_each_cpu_mask to for_each_cpu_mask_nr where appropriate Reviewed-by: Paul Jackson <pj@sgi.com> Reviewed-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-21clockevents: fix typo in tick-broadcast.cGlauber Costa
braodcast -> broadcast Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17[S390] genirq/clockevents: move irq affinity prototypes/inlines to interrupt.hRussell King
> Generic code is not supposed to include irq.h. Replace this include > by linux/hardirq.h instead and add/replace an include of linux/irq.h > in asm header files where necessary. > This change should only matter for architectures that make use of > GENERIC_CLOCKEVENTS. > Architectures in question are mips, x86, arm, sh, powerpc, uml and sparc64. > > I did some cross compile tests for mips, x86_64, arm, powerpc and sparc64. > This patch fixes also build breakages caused by the include replacement in > tick-common.h. I generally dislike adding optional linux/* includes in asm/* includes - I'm nervous about this causing include loops. However, there's a separate point to be discussed here. That is, what interfaces are expected of every architecture in the kernel. If generic code wants to be able to set the affinity of interrupts, then that needs to become part of the interfaces listed in linux/interrupt.h rather than linux/irq.h. So what I suggest is this approach instead (against Linus' tree of a couple of days ago) - we move irq_set_affinity() and irq_can_set_affinity() to linux/interrupt.h, change the linux/irq.h includes to linux/interrupt.h and include asm/irq_regs.h where needed (asm/irq_regs.h is supposed to be rarely used include since not much touches the stacked parent context registers.) Build tested on ARM PXA family kernels and ARM's Realview platform kernels which both use genirq. [ tglx@linutronix.de: add GENERIC_HARDIRQ dependencies ] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-01-30timer: clean up tick-broadcast.cThomas Gleixner
clean up tick-broadcast.c Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-18clockevents: fix reprogramming decision in oneshot broadcastThomas Gleixner
Resolve the following regression of a choppy, almost unusable laptop: http://lkml.org/lkml/2007/12/7/299 http://bugzilla.kernel.org/show_bug.cgi?id=9525 A previous version of the code did the reprogramming of the broadcast device in the return from idle code. This was removed, but the logic in tick_handle_oneshot_broadcast() was kept the same. When a broadcast interrupt happens we signal the expiry to all CPUs which have an expired event. If none of the CPUs has an expired event, which can happen in dyntick mode, then we reprogram the broadcast device. We do not reprogram otherwise, but this is only correct if all CPUs, which are in the idle broadcast state have been woken up. The code ignores, that there might be pending not yet expired events on other CPUs, which are in the idle broadcast state. So the delivery of those events can be delayed for quite a time. Change the tick_handle_oneshot_broadcast() function to check for CPUs, which are in broadcast state and are not woken up by the current event, and enforce the rearming of the broadcast device for those CPUs. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-05time: fix inconsistent function names in commentsLi Zefan
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17x86: C1E late detection fix. Really switch off lapic timerThomas Gleixner
Doh, I completely missed that devices marked DUMMY are not running the set_mode function. So we force broadcasting, but we keep the local APIC timer running. Let the clock event layer mark the device _after_ switching it off. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-17time: simplify smp_call_function_single() call sequenceAvi Kivity
smp_call_function_single() now knows how to call the function on the current cpu. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14clockevents: introduce force broadcast notifierThomas Gleixner
The 64bit SMP bootup is slightly different to the 32bit one. It enables the boot CPU local APIC timer before all CPUs are brought up. Some AMD C1E systems have the C1E feature flag only set in the secondary CPU. Due to the early enable of the boot CPU local APIC timer the APIC timer is registered as a fully functional device. When we detect the wreckage during the bringup of the secondary CPU, we need to force the boot CPU into broadcast mode. Add a new notifier reason and implement the force broadcast in the clock events layer. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-12clock events: allow replacement of broadcast timerVenki Pallipadi
Change the broadcast timer, if a timer with higher rating becomes available. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-12clockevents: fix periodic broadcast for oneshot devicesThomas Gleixner
The next_event member of the clock event device is used to keep track of the next periodic event. For one shot only devices it is wrong to clear the variable, as the next event will be based on it. Pointed out by Ralf Baechle Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-09-22clockevents: remove the suspend/resume workaround^WthinkoThomas Gleixner
In a desparate attempt to fix the suspend/resume problem on Andrews VAIO I added a workaround which enforced the broadcast of the oneshot timer on resume. This was actually resolving the problem on the VAIO but was just a stupid workaround, which was not tackling the root cause: the assignement of lower idle C-States in the ACPI processor_idle code. The cpuidle patches, which utilize the dynamic tick feature and go faster into deeper C-states exposed the problem again. The correct solution is the previous patch, which prevents lower C-states across the suspend/resume. Remove the enforcement code, including the conditional broadcast timer arming, which helped to pamper over the real problem for quite a time. The oneshot broadcast flag for the cpu, which runs the resume code can never be set at the time when this code is executed. It only gets set, when the CPU is entering a lower idle C-State. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Morton <akpm@linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-16clockevents: do not shutdown the oneshot broadcast deviceThomas Gleixner
When a cpu goes offline it is removed from the broadcast masks. If the mask becomes empty the code shuts down the broadcast device. This is wrong, because the broadcast device needs to be ready for the online cpu going idle (into a c-state, which stops the local apic timer). Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-09-16clockevents: Enforce oneshot broadcast when broadcast mask is set on resumeThomas Gleixner
The jinxed VAIO refuses to resume without hitting keys on the keyboard when this is not enforced. It is unclear why the cpu ends up in a lower C State without notifying the clock events layer, but enforcing the oneshot broadcast here is safe. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-07-21clockevents: fix device replacementThomas Gleixner
When a device is replaced by a better rated device, then the broadcast mode needs to be evaluated again. When the new device has no requirement for broadcasting, then the broadcast bits for the CPU must be cleared. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21clockevents: fix resume logicThomas Gleixner
We need to make sure, that the clockevent devices are resumed, before the tick is resumed. The current resume logic does not guarantee this. Add CLOCK_EVT_MODE_RESUME and call the set mode functions of the clock event devices before resuming the tick / oneshot functionality. Fixup the existing users. Thanks to Nigel Cunningham for tracking down a long standing thinko, which affected the jinxed VAIO. [akpm@linux-foundation.org: xen build fix] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23Ignore bogus ACPI info for offline CPUsThomas Gleixner
Booting a SMP kernel with maxcpus=1 on a SMP system leads to a hard hang, because ACPI ignores the maxcpus setting and sends timer broadcast info for the offline CPUs. This results in a stuck for ever call to smp_call_function_single() on an offline CPU. Ignore the bogus information and print a kernel error to remind ACPI folks to fix it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>