| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo updates from Eric Biederman:
"I have been slowly sorting out siginfo and this is the culmination of
that work.
The primary result is in several ways the signal infrastructure has
been made less error prone. The code has been updated so that manually
specifying SEND_SIG_FORCED is never necessary. The conversion to the
new siginfo sending functions is now complete, which makes it
difficult to send a signal without filling in the proper siginfo
fields.
At the tail end of the patchset comes the optimization of decreasing
the size of struct siginfo in the kernel from 128 bytes to about 48
bytes on 64bit. The fundamental observation that enables this is by
definition none of the known ways to use struct siginfo uses the extra
bytes.
This comes at the cost of a small user space observable difference.
For the rare case of siginfo being injected into the kernel only what
can be copied into kernel_siginfo is delivered to the destination, the
rest of the bytes are set to 0. For cases where the signal and the
si_code are known this is safe, because we know those bytes are not
used. For cases where the signal and si_code combination is unknown
the bits that won't fit into struct kernel_siginfo are tested to
verify they are zero, and the send fails if they are not.
I made an extensive search through userspace code and I could not find
anything that would break because of the above change. If it turns out
I did break something it will take just the revert of a single change
to restore kernel_siginfo to the same size as userspace siginfo.
Testing did reveal dependencies on preferring the signo passed to
sigqueueinfo over si->signo, so bit the bullet and added the
complexity necessary to handle that case.
Testing also revealed bad things can happen if a negative signal
number is passed into the system calls. Something no sane application
will do but something a malicious program or a fuzzer might do. So I
have fixed the code that performs the bounds checks to ensure negative
signal numbers are handled"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits)
signal: Guard against negative signal numbers in copy_siginfo_from_user32
signal: Guard against negative signal numbers in copy_siginfo_from_user
signal: In sigqueueinfo prefer sig not si_signo
signal: Use a smaller struct siginfo in the kernel
signal: Distinguish between kernel_siginfo and siginfo
signal: Introduce copy_siginfo_from_user and use it's return value
signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE
signal: Fail sigqueueinfo if si_signo != sig
signal/sparc: Move EMT_TAGOVF into the generic siginfo.h
signal/unicore32: Use force_sig_fault where appropriate
signal/unicore32: Generate siginfo in ucs32_notify_die
signal/unicore32: Use send_sig_fault where appropriate
signal/arc: Use force_sig_fault where appropriate
signal/arc: Push siginfo generation into unhandled_exception
signal/ia64: Use force_sig_fault where appropriate
signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn
signal/ia64: Use the generic force_sigsegv in setup_frame
signal/arm/kvm: Use send_sig_mceerr
signal/arm: Use send_sig_fault where appropriate
signal/arm: Use force_sig_fault where appropriate
...
|
|
Architectures have extra archdata in the clocksource, e.g. for VDSO
support. There are no sanity checks or general initializations for this
available. Add support for that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Matt Rickard <matt@softrans.com.au>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: devel@linuxdriverproject.org
Cc: virtualization@lists.linux-foundation.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Juergen Gross <jgross@suse.com>
Link: https://lkml.kernel.org/r/20180917130706.973042587@linutronix.de
|
|
Linus recently observed that if we did not worry about the padding
member in struct siginfo it is only about 48 bytes, and 48 bytes is
much nicer than 128 bytes for allocating on the stack and copying
around in the kernel.
The obvious thing of only adding the padding when userspace is
including siginfo.h won't work as there are sigframe definitions in
the kernel that embed struct siginfo.
So split siginfo in two; kernel_siginfo and siginfo. Keeping the
traditional name for the userspace definition. While the version that
is used internally to the kernel and ultimately will not be padded to
128 bytes is called kernel_siginfo.
The definition of struct kernel_siginfo I have put in include/signal_types.h
A set of buildtime checks has been added to verify the two structures have
the same field offsets.
To make it easy to verify the change kernel_siginfo retains the same
size as siginfo. The reduction in size comes in a following change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
I turns out that the silly spawn kthread from worker was actually needed.
clocksource_watchdog_kthread() cannot be called directly from
clocksource_watchdog_work(), because clocksource_select() calls
timekeeping_notify() which uses stop_machine(). One cannot use
stop_machine() from a workqueue() due lock inversions wrt CPU hotplug.
Revert the patch but add a comment that explain why we jump through such
apparently silly hoops.
Fixes: 7197e77abcb6 ("clocksource: Remove kthread")
Reported-by: Siegfried Metz <frame@mailbox.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Tested-by: Kevin Shanahan <kevin@shanahan.id.au>
Tested-by: viktor_jaegerskuepper@freenet.de
Tested-by: Siegfried Metz <frame@mailbox.org>
Cc: rafael.j.wysocki@intel.com
Cc: len.brown@intel.com
Cc: diego.viola@gmail.com
Cc: rui.zhang@intel.com
Cc: bjorn.andersson@linaro.org
Link: https://lkml.kernel.org/r/20180905084158.GR24124@hirez.programming.kicks-ass.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull core signal handling updates from Eric Biederman:
"It was observed that a periodic timer in combination with a
sufficiently expensive fork could prevent fork from every completing.
This contains the changes to remove the need for that restart.
This set of changes is split into several parts:
- The first part makes PIDTYPE_TGID a proper pid type instead
something only for very special cases. The part starts using
PIDTYPE_TGID enough so that in __send_signal where signals are
actually delivered we know if the signal is being sent to a a group
of processes or just a single process.
- With that prep work out of the way the logic in fork is modified so
that fork logically makes signals received while it is running
appear to be received after the fork completes"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits)
signal: Don't send signals to tasks that don't exist
signal: Don't restart fork when signals come in.
fork: Have new threads join on-going signal group stops
fork: Skip setting TIF_SIGPENDING in ptrace_init_task
signal: Add calculate_sigpending()
fork: Unconditionally exit if a fatal signal is pending
fork: Move and describe why the code examines PIDNS_ADDING
signal: Push pid type down into complete_signal.
signal: Push pid type down into __send_signal
signal: Push pid type down into send_signal
signal: Pass pid type into do_send_sig_info
signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task
signal: Pass pid type into group_send_sig_info
signal: Pass pid and pid type into send_sigqueue
posix-timers: Noralize good_sigevent
signal: Use PIDTYPE_TGID to clearly store where file signals will be sent
pid: Implement PIDTYPE_TGID
pids: Move the pgrp and session pid pointers from task_struct to signal_struct
kvm: Don't open code task_pid in kvm_vcpu_ioctl
pids: Compute task_tgid using signal->leader_pid
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- parisc now uses the generic dma_noncoherent_ops implementation
(Christoph Hellwig)
- further memory barrier and spinlock improvements (John David Anglin)
- prepare removal of current_text_addr() functions (Nick Desaulniers)
- improve kernel stack unwinding on parisc (me)
- drop ENOTSUP which was defined on parisc only (me)
* 'parisc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix and improve kernel stack unwinding
parisc: Remove unnecessary barriers from spinlock.h
parisc: Remove ordered stores from syscall.S
parisc: prefer _THIS_IP_ and _RET_IP_ statement expressions
parisc: Add HAVE_REGS_AND_STACK_ACCESS_API feature
parisc: Drop architecture-specific ENOTSUP define
parisc: use generic dma_noncoherent_ops
parisc: always use flush_kernel_dcache_range for DMA cache maintainance
parisc: merge pcx_dma_ops and pcxl_dma_ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Thomas Gleixner:
"Early TSC based time stamping to allow better boot time analysis.
This comes with a general cleanup of the TSC calibration code which
grew warts and duct taping over the years and removes 250 lines of
code. Initiated and mostly implemented by Pavel with help from various
folks"
* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
x86/kvmclock: Mark kvm_get_preset_lpj() as __init
x86/tsc: Consolidate init code
sched/clock: Disable interrupts when calling generic_sched_clock_init()
timekeeping: Prevent false warning when persistent clock is not available
sched/clock: Close a hole in sched_clock_init()
x86/tsc: Make use of tsc_calibrate_cpu_early()
x86/tsc: Split native_calibrate_cpu() into early and late parts
sched/clock: Use static key for sched_clock_running
sched/clock: Enable sched clock early
sched/clock: Move sched clock initialization and merge with generic clock
x86/tsc: Use TSC as sched clock early
x86/tsc: Initialize cyc2ns when tsc frequency is determined
x86/tsc: Calibrate tsc only once
ARM/time: Remove read_boot_clock64()
s390/time: Remove read_boot_clock64()
timekeeping: Default boot time offset to local_clock()
timekeeping: Replace read_boot_clock64() with read_persistent_wall_and_boot_offset()
s390/time: Add read_persistent_wall_and_boot_offset()
x86/xen/time: Output xen sched_clock time from 0
x86/xen/time: Initialize pv xen time in init_hypervisor_platform()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The timers departement more or less proudly presents:
- More Y2038 timekeeping work mostly in the core code. The work is
slowly, but steadily targeting the actuall syscalls.
- Enhanced timekeeping suspend/resume support by utilizing
clocksources which do not stop during suspend, but are otherwise
not the main timekeeping clocksources.
- Make NTP adjustmets more accurate and immediate when the frequency
is set directly and not incrementally.
- Sanitize the overrung handing of posix timers
- A new timer driver for Mediatek SoCs
- The usual pile of fixes and updates all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
clockevents: Warn if cpu_all_mask is used as cpumask
tick/broadcast-hrtimer: Use cpu_possible_mask for ce_broadcast_hrtimer
clocksource/drivers/arm_arch_timer: Fix bogus cpu_all_mask usage
clocksource: ti-32k: Remove CLOCK_SOURCE_SUSPEND_NONSTOP flag
timers: Clear timer_base::must_forward_clk with timer_base::lock held
clocksource/drivers/sprd: Register one always-on timer to compensate suspend time
clocksource/drivers/timer-mediatek: Add support for system timer
clocksource/drivers/timer-mediatek: Convert the driver to timer-of
clocksource/drivers/timer-mediatek: Use specific prefix for GPT
clocksource/drivers/timer-mediatek: Rename mtk_timer to timer-mediatek
clocksource/drivers/timer-mediatek: Add system timer bindings
clocksource/drivers: Set clockevent device cpumask to cpu_possible_mask
time: Introduce one suspend clocksource to compensate the suspend time
time: Fix extra sleeptime injection when suspend fails
timekeeping/ntp: Constify some function arguments
ntp: Use kstrtos64 for s64 variable
ntp: Remove redundant arguments
timer: Fix coding style
ktime: Provide typesafe ktime_to_ns()
hrtimer: Improve kernel message printing
...
|
|
parisc is the only Linux architecture which has defined a value for ENOTSUP.
All other architectures #define ENOTSUP as EOPNOTSUPP in their libc headers.
Having an own value for ENOTSUP which is different than EOPNOTSUPP often gives
problems with userspace programs which expect both to be the same. One such
example is a build error in the libuv package, as can be seen in
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=900237.
Since we dropped HP-UX support, there is no real benefit in keeping an own
value for ENOTSUP. This patch drops the parisc value for ENOTSUP from the
kernel sources. glibc needs no patch, it reuses the exported headers.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Using cpu_all_mask in clockevents cpumask may result in issues while
comparing multiple clockevent devices to choose the preferred one.
On one of the platforms with 2 system (i.e. non per-CPU) timers with
different ratings, having cpu_all_mask for one of the device resulted in a
boot hang due to a endless loop in clockevents_notify_released() as both
were clocksources were selected as preferred.
In order to prevent such issues in the future, warn if any clockevent
driver sets cpu_all_mask as it's cpumask and just override it to use
cpu_possible_mask. All the existing occurrences of cpu_all_mask are already
replaced with cpu_possible_mask.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/1531308264-24220-3-git-send-email-sudeep.holla@arm.com
|
|
This is the last instance of cpu_all_mask usage in the core framework.
Replace it with cpu_possible_mask like all other instances in the
clockevent drivers. This makes it possible to add a warning in the core
clockevents_register_device on usage of cpu_all_mask from any clockevent
drivers in the future.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/1531308264-24220-2-git-send-email-sudeep.holla@arm.com
|
|
timer_base::must_forward_clock is indicating that the base clock might be
stale due to a long idle sleep.
The forwarding of the base clock takes place in the timer softirq or when a
timer is enqueued to a base which is idle. If the enqueue of timer to an
idle base happens from a remote CPU, then the following race can happen:
CPU0 CPU1
run_timer_softirq mod_timer
base = lock_timer_base(timer);
base->must_forward_clk = false
if (base->must_forward_clk)
forward(base); -> skipped
enqueue_timer(base, timer, idx);
-> idx is calculated high due to
stale base
unlock_timer_base(timer);
base = lock_timer_base(timer);
forward(base);
The root cause is that timer_base::must_forward_clk is cleared outside the
timer_base::lock held region, so the remote queuing CPU observes it as
cleared, but the base clock is still stale. This can cause large
granularity values for timers, i.e. the accuracy of the expiry time
suffers.
Prevent this by clearing the flag with timer_base::lock held, so that the
forwarding takes place before the cleared flag is observable by a remote
CPU.
Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john.stultz@linaro.org
Cc: sboyd@kernel.org
Cc: linux-arm-msm@vger.kernel.org
Link: https://lkml.kernel.org/r/1533199863-22748-1-git-send-email-gkohli@codeaurora.org
|
|
local_timer_softirq_pending() checks whether the timer softirq is
pending with: local_softirq_pending() & TIMER_SOFTIRQ.
This is wrong because TIMER_SOFTIRQ is the softirq number and not a
bitmask. So the test checks for the wrong bit.
Use BIT(TIMER_SOFTIRQ) instead.
Fixes: 5d62c183f9e9 ("nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()")
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: bigeasy@linutronix.de
Cc: peterz@infradead.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180731161358.29472-1-anna-maria@linutronix.de
|
|
On arches with no persistent clock a message like this is printed during
boot:
[ 0.000000] Persistent clock returned invalid value
The value is not invalid: Zero means that no persistent clock is available
and the absence of persistent clock should be quietly accepted.
Fixes: 3eca993740b8 ("timekeeping: Replace read_boot_clock64() with read_persistent_wall_and_boot_offset()")
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: steven.sistare@oracle.com
Cc: daniel.m.jordan@oracle.com
Cc: sboyd@kernel.org
Cc: john.stultz@linaro.org
Link: https://lkml.kernel.org/r/20180725200018.23722-1-pasha.tatashin@oracle.com
|
|
Make the code more maintainable by performing more of the signal
related work in send_sigqueue.
A quick inspection of do_timer_create will show that this code path
does not lookup a thread group by a thread's pid. Making it safe
to find the task pointed to by it_pid with "pid_task(it_pid, type)";
This supports the changes needed in fork to tell if a signal was sent
to a single process or a group of processes.
Having the pid to task transition in signal.c will also make it easier
to sort out races with de_thread and and the thread group leader
exiting when it comes time to address that.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
In good_sigevent directly compute the default return value as
"task_tgid(current)". This is exactly the same as
"task_pid(current->group_leader)" but written more clearly.
In the thread case first compute the thread's pid. Then veify that
attached to that pid is a thread of the current thread group.
This has the net effect of making the code a little clearer, and
making it obvious that posix timers never look up a process by a the
pid of a thread.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Everywhere except in the pid array we distinguish between a tasks pid and
a tasks tgid (thread group id). Even in the enumeration we want that
distinction sometimes so we have added __PIDTYPE_TGID. With leader_pid
we almost have an implementation of PIDTYPE_TGID in struct signal_struct.
Add PIDTYPE_TGID as a first class member of the pid_type enumeration and
into the pids array. Then remove the __PIDTYPE_TGID special case and the
leader_pid in signal_struct.
The net size increase is just an extra pointer added to struct pid and
an extra pair of pointers of an hlist_node added to task_struct.
The effect on code maintenance is the removal of a number of special
cases today and the potential to remove many more special cases as
PIDTYPE_TGID gets used to it's fullest. The long term potential
is allowing zombie thread group leaders to exit, which will remove
a lot more special cases in the code.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
https://git.linaro.org/people/john.stultz/linux into timers/core
Pull the second set of timekeeping things for 4.19 from John Stultz
* NTP argument clenaups and constification from Ondrej Mosnacek
* Fix to avoid RTC injecting sleeptime when suspend fails from
Mukesh Ojha
* Broading suspsend-timing to include non-stop clocksources that
aren't currently used for timekeeping from Baolin Wang
|
|
On some hardware with multiple clocksources, we have coarse grained
clocksources that support the CLOCK_SOURCE_SUSPEND_NONSTOP flag, but
which are less than ideal for timekeeping whereas other clocksources
can be better candidates but halt on suspend.
Currently, the timekeeping core only supports timing suspend using
CLOCK_SOURCE_SUSPEND_NONSTOP clocksources if that clocksource is the
current clocksource for timekeeping.
As a result, some architectures try to implement read_persistent_clock64()
using those non-stop clocksources, but isn't really ideal, which will
introduce more duplicate code. To fix this, provide logic to allow a
registered SUSPEND_NONSTOP clocksource, which isn't the current
clocksource, to be used to calculate the suspend time.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
[jstultz: minor tweaks to merge with previous resume changes]
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
Currently, there exists a corner case assuming when there is
only one clocksource e.g RTC, and system failed to go to
suspend mode. While resume rtc_resume() injects the sleeptime
as timekeeping_rtc_skipresume() returned 'false' (default value
of sleeptime_injected) due to which we can see mismatch in
timestamps.
This issue can also come in a system where more than one
clocksource are present and very first suspend fails.
Success case:
------------
{sleeptime_injected=false}
rtc_suspend() => timekeeping_suspend() => timekeeping_resume() =>
(sleeptime injected)
rtc_resume()
Failure case:
------------
{failure in sleep path} {sleeptime_injected=false}
rtc_suspend() => rtc_resume()
{sleeptime injected again which was not required as the suspend failed}
Fix this by handling the boolean logic properly.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
Add 'const' to some function arguments and variables to make it easier
to read the code.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[jstultz: Also fixup pre-existing checkpatch warnings for
prototype arguments with no variable name]
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
sched_clock_postinit() initializes a generic clock on systems where no
other clock is provided. This function may be called only after
timekeeping_init().
Rename sched_clock_postinit to generic_clock_inti() and call it from
sched_clock_init(). Move the call for sched_clock_init() until after
time_init().
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: steven.sistare@oracle.com
Cc: daniel.m.jordan@oracle.com
Cc: linux@armlinux.org.uk
Cc: schwidefsky@de.ibm.com
Cc: heiko.carstens@de.ibm.com
Cc: john.stultz@linaro.org
Cc: sboyd@codeaurora.org
Cc: hpa@zytor.com
Cc: douly.fnst@cn.fujitsu.com
Cc: prarit@redhat.com
Cc: feng.tang@intel.com
Cc: pmladek@suse.com
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: linux-s390@vger.kernel.org
Cc: boris.ostrovsky@oracle.com
Cc: jgross@suse.com
Cc: pbonzini@redhat.com
Link: https://lkml.kernel.org/r/20180719205545.16512-23-pasha.tatashin@oracle.com
|
|
read_persistent_wall_and_boot_offset() is called during boot to read
both the persistent clock and also return the offset between the boot time
and the value of persistent clock.
Change the default boot_offset from zero to local_clock() so architectures,
that do not have a dedicated boot_clock but have early sched_clock(), such
as SPARCv9, x86, and possibly more will benefit from this change by getting
a better and more consistent estimate of the boot time without need for an
arch specific implementation.
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: steven.sistare@oracle.com
Cc: daniel.m.jordan@oracle.com
Cc: linux@armlinux.org.uk
Cc: schwidefsky@de.ibm.com
Cc: heiko.carstens@de.ibm.com
Cc: john.stultz@linaro.org
Cc: sboyd@codeaurora.org
Cc: hpa@zytor.com
Cc: douly.fnst@cn.fujitsu.com
Cc: peterz@infradead.org
Cc: prarit@redhat.com
Cc: feng.tang@intel.com
Cc: pmladek@suse.com
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: linux-s390@vger.kernel.org
Cc: boris.ostrovsky@oracle.com
Cc: jgross@suse.com
Cc: pbonzini@redhat.com
Link: https://lkml.kernel.org/r/20180719205545.16512-17-pasha.tatashin@oracle.com
|
|
read_persistent_wall_and_boot_offset()
If architecture does not support exact boot time, it is challenging to
estimate boot time without having a reference to the current persistent
clock value. Yet, it cannot read the persistent clock time again, because
this may lead to math discrepancies with the caller of read_boot_clock64()
who have read the persistent clock at a different time.
This is why it is better to provide two values simultaneously: the
persistent clock value, and the boot time.
Replace read_boot_clock64() with:
read_persistent_wall_and_boot_offset(wall_time, boot_offset)
Where wall_time is returned by read_persistent_clock() And boot_offset is
wall_time - boot time, which defaults to 0.
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: steven.sistare@oracle.com
Cc: daniel.m.jordan@oracle.com
Cc: linux@armlinux.org.uk
Cc: schwidefsky@de.ibm.com
Cc: heiko.carstens@de.ibm.com
Cc: john.stultz@linaro.org
Cc: sboyd@codeaurora.org
Cc: hpa@zytor.com
Cc: douly.fnst@cn.fujitsu.com
Cc: peterz@infradead.org
Cc: prarit@redhat.com
Cc: feng.tang@intel.com
Cc: pmladek@suse.com
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: linux-s390@vger.kernel.org
Cc: boris.ostrovsky@oracle.com
Cc: jgross@suse.com
Cc: pbonzini@redhat.com
Link: https://lkml.kernel.org/r/20180719205545.16512-16-pasha.tatashin@oracle.com
|
|
...instead of kstrtol with a dirty cast.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
The 'ts' argument of process_adj_status() and process_adjtimex_modes()
is unused and can be safely removed.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
The call to wake_up_nohz_cpu() is incorrectly indented. Remove the surplus TAB.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Cc: john.stultz@linaro.org
Cc: sboyd@kernel.org
Cc: zhong.weidong@zte.com.cn
CC: Anna-Maria Gleixner <anna-maria@linutronix.de>
Link: https://lkml.kernel.org/r/1531721337-30284-1-git-send-email-wang.yi59@zte.com.cn
|
|
https://git.linaro.org/people/john.stultz/linux into timers/core
Pull timekeeping updates from John Stultz:
- Make the timekeeping update more precise when NTP frequency is set
directly by updating the multiplier.
- Adjust selftests
|
|
- Join split message for easier grepping,
- Use pr_*() instead of printk*(),
- Use %u to format unsigned cpu numbers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180712144118.8819-1-geert+renesas@glider.be
|
|
This reverts commit 1332a90558013ae4242e3dd7934bdcdeafb06c0d.
The original issue was not because of incorrect checking of cpumask for
both new and old tick device. It was incorrectly analysed was due to the
misunderstanding of the comment and misinterpretation of the return value
from tick_check_preferred. The main issue is with the clockevent driver
that sets the cpumask to cpu_all_mask instead of cpu_possible_mask.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1531151136-18297-1-git-send-email-sudeep.holla@arm.com
|
|
When the NTP frequency is set directly from userspace using the
ADJ_FREQUENCY or ADJ_TICK timex mode, immediately update the
timekeeper's multiplier instead of waiting for the next tick.
This removes a hidden non-deterministic delay in setting of the
frequency and allows an extremely tight control of the system clock
with update rates close to or even exceeding the kernel HZ.
The update is limited to archs using modern timekeeping
(!ARCH_USES_GETTIMEOFFSET).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
Air Icy reported:
UBSAN: Undefined behaviour in kernel/time/alarmtimer.c:811:7
signed integer overflow:
1529859276030040771 + 9223372036854775807 cannot be represented in type 'long long int'
Call Trace:
alarm_timer_nsleep+0x44c/0x510 kernel/time/alarmtimer.c:811
__do_sys_clock_nanosleep kernel/time/posix-timers.c:1235 [inline]
__se_sys_clock_nanosleep kernel/time/posix-timers.c:1213 [inline]
__x64_sys_clock_nanosleep+0x326/0x4e0 kernel/time/posix-timers.c:1213
do_syscall_64+0xb8/0x3a0 arch/x86/entry/common.c:290
alarm_timer_nsleep() uses ktime_add() to add the current time and the
relative expiry value. ktime_add() has no sanity checks so the addition
can overflow when the relative timeout is large enough.
Use ktime_add_safe() which has the necessary sanity checks in place and
limits the result to the valid range.
Fixes: 9a7adcf5c6de ("timers: Posix interface for alarm-timers")
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1807020926360.1595@nanos.tec.linutronix.de
|
|
The posix timer overrun handling is broken because the forwarding functions
can return a huge number of overruns which does not fit in an int. As a
consequence timer_getoverrun(2) and siginfo::si_overrun can turn into
random number generators.
The k_clock::timer_forward() callbacks return a 64 bit value now. Make
k_itimer::ti_overrun[_last] 64bit as well, so the kernel internal
accounting is correct. 3Remove the temporary (int) casts.
Add a helper function which clamps the overrun value returned to user space
via timer_getoverrun(2) or siginfo::si_overrun limited to a positive value
between 0 and INT_MAX. INT_MAX is an indicator for user space that the
overrun value has been clamped.
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Link: https://lkml.kernel.org/r/20180626132705.018623573@linutronix.de
|
|
The posix timer ti_overrun handling is broken because the forwarding
functions can return a huge number of overruns which does not fit in an
int. As a consequence timer_getoverrun(2) and siginfo::si_overrun can turn
into random number generators.
As a first step to address that let the timer_forward() callbacks return
the full 64 bit value.
Cast it to (int) temporarily until k_itimer::ti_overrun is converted to
64bit and the conversion to user space visible values is sanitized.
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Link: https://lkml.kernel.org/r/20180626132704.922098090@linutronix.de
|
|
timer_set/gettime and timerfd_set/get apis use struct itimerspec at the
user interface layer. struct itimerspec is not y2038-safe. Change these
interfaces to use y2038-safe struct __kernel_itimerspec instead. This will
help define new syscalls when 32bit architectures select CONFIG_64BIT_TIME.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: viro@zeniv.linux.org.uk
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Cc: y2038@lists.linaro.org
Link: https://lkml.kernel.org/r/20180617051144.29756-4-deepa.kernel@gmail.com
|
|
This will aid in enabling the compat syscalls on 32-bit architectures later
on.
Also move compat_itimerspec and related defines to compat_time.h. The
compat_time.h file will eventually be deleted.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: viro@zeniv.linux.org.uk
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Cc: y2038@lists.linaro.org
Link: https://lkml.kernel.org/r/20180617051144.29756-3-deepa.kernel@gmail.com
|
|
struct itimerspec is not y2038-safe.
Introduce a new struct __kernel_itimerspec based on the kernel internal
y2038-safe struct itimerspec64.
The definition of struct __kernel_itimerspec includes two struct
__kernel_timespec.
Since struct __kernel_timespec has the same representation in native and
compat modes, so does struct __kernel_itimerspec. This helps have a common
entry point for syscalls using struct __kernel_itimerspec.
New y2038-safe syscalls will use this new type. Since most of the new
syscalls are just an update to the native syscalls with the type update,
place the new definition under CONFIG_64BIT_TIME. This helps architectures
that do not support the above config to keep using the old definition of
struct itimerspec.
Also change the get/put_itimerspec64 to use struct__kernel_itimerspec.
This will help 32 bit architectures to use the new syscalls when
architectures select CONFIG_64BIT_TIME.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: viro@zeniv.linux.org.uk
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Cc: y2038@lists.linaro.org
Link: https://lkml.kernel.org/r/20180617051144.29756-2-deepa.kernel@gmail.com
|
|
For the common cases where 1000 is a multiple of HZ, or HZ is a multiple of
1000, jiffies_to_msecs() never returns zero when passed a non-zero time
period.
However, if HZ > 1000 and not an integer multiple of 1000 (e.g. 1024 or
1200, as used on alpha and DECstation), jiffies_to_msecs() may return zero
for small non-zero time periods. This may break code that relies on
receiving back a non-zero value.
jiffies_to_usecs() does not need such a fix: one jiffy can only be less
than one µs if HZ > 1000000, and such large values of HZ are already
rejected at build time, twice:
- include/linux/jiffies.h does #error if HZ >= 12288,
- kernel/time/time.c has BUILD_BUG_ON(HZ > USEC_PER_SEC).
Broken since forever.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-alpha@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180622143357.7495-1-geert@linux-m68k.org
|
|
Some of the oddly named time accessor functions now have a more consistent
naming, which should be used from now on so the aliases can be removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: y2038@lists.linaro.org
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lkml.kernel.org/r/20180618143246.3865099-1-arnd@arndb.de
|
|
The two do the same, this moves all users to the newer name for consistency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: y2038@lists.linaro.org
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Link: https://lkml.kernel.org/r/20180618140811.2998503-3-arnd@arndb.de
|
|
Both get_seconds() and do_gettimeofday() are deprecated. Change the time()
implementation to use the replacement function instead.
Obviously the system call will still overflow in 2038, but this gets us
closer to removing the old helper functions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: y2038@lists.linaro.org
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20180618140811.2998503-2-arnd@arndb.de
|
|
Commit b5793b0d92c9 added support for building the nanosleep compat system
call on 32-bit architectures, but missed one change in nanosleep_copyout(),
which would trigger a BUG() as soon as any architecture is switched over to
use it.
Use the proper config symbol to enable the code path.
Fixes: Commit b5793b0d92c9 ("posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: y2038@lists.linaro.org
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20180618140811.2998503-1-arnd@arndb.de
|
|
The lockdep_assert_irqs_disabled() was a BUG_ON() statement in the
beginning and it was added just before the "spin_lock(siglock)"
statement to ensure this lock was taken with disabled interrupts.
This is no longer the case: the siglock is acquired via
lock_task_sighand() and this function already disables the interrupts.
The lock is also acquired before this "lockdep_assert_irqs_disabled" so
it is best to remove it.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r20180504152548.7166-1-bigeasy@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include a significant update of the generic power domains
(genpd) and Operating Performance Points (OPP) frameworks, mostly
related to the introduction of power domain performance levels,
cpufreq updates (new driver for Qualcomm Kryo processors, updates of
the existing drivers, some core fixes, schedutil governor
improvements), PCI power management fixes, ACPI workaround for
EC-based wakeup events handling on resume from suspend-to-idle, and
major updates of the turbostat and pm-graph utilities.
Specifics:
- Introduce power domain performance levels into the the generic
power domains (genpd) and Operating Performance Points (OPP)
frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter).
- Fix two issues in the runtime PM framework related to the
initialization and removal of devices using device links (Ulf
Hansson).
- Clean up the initialization of drivers for devices in PM domains
(Ulf Hansson, Geert Uytterhoeven).
- Fix a cpufreq core issue related to the policy sysfs interface
causing CPU online to fail for CPUs sharing one cpufreq policy in
some situations (Tao Wang).
- Make it possible to use platform-specific suspend/resume hooks in
the cpufreq-dt driver and make the Armada 37xx DVFS use that
feature (Viresh Kumar, Miquel Raynal).
- Optimize policy transition notifications in cpufreq (Viresh Kumar).
- Improve the iowait boost mechanism in the schedutil cpufreq
governor (Patrick Bellasi).
- Improve the handling of deferred frequency updates in the schedutil
cpufreq governor (Joel Fernandes, Dietmar Eggemann, Rafael Wysocki,
Viresh Kumar).
- Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin).
- Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry
Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman, Viresh
Kumar).
- Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag set
and update stale comments in the PCI core PM code (Rafael Wysocki).
- Work around an issue related to the handling of EC-based wakeup
events in the ACPI PM core during resume from suspend-to-idle if
the EC has been put into the low-power mode (Rafael Wysocki).
- Improve the handling of wakeup source objects in the PM core (Doug
Berger, Mahendran Ganesh, Rafael Wysocki).
- Update the driver core to prevent deferred probe from breaking
suspend/resume ordering (Feng Kan).
- Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael
Wysocki).
- Make the core suspend/resume code and cpufreq support the RT patch
(Sebastian Andrzej Siewior, Thomas Gleixner).
- Consolidate the PM QoS handling in cpuidle governors (Rafael
Wysocki).
- Fix a possible crash in the hibernation core (Tetsuo Handa).
- Update the rockchip-io Adaptive Voltage Scaling (AVS) driver (David
Wu).
- Update the turbostat utility (fixes, cleanups, new CPU IDs, new
command line options, built-in "Low Power Idle" counters support,
new POLL and POLL% columns) and add an entry for it to MAINTAINERS
(Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner,
Prarit Bhargava, Srinivas Pandruvada).
- Update the pm-graph to version 5.1 (Todd Brandt).
- Update the intel_pstate_tracer utility (Doug Smythies)"
* tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (128 commits)
tools/power turbostat: update version number
tools/power turbostat: Add Node in output
tools/power turbostat: add node information into turbostat calculations
tools/power turbostat: remove num_ from cpu_topology struct
tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node
tools/power turbostat: track thread ID in cpu_topology
tools/power turbostat: Calculate additional node information for a package
tools/power turbostat: Fix node and siblings lookup data
tools/power turbostat: set max_num_cpus equal to the cpumask length
tools/power turbostat: if --num_iterations, print for specific number of iterations
tools/power turbostat: Add Cannon Lake support
tools/power turbostat: delete duplicate #defines
x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
tools/power turbostat: add POLL and POLL% column
tools/power turbostat: Fix --hide Pk%pc10
tools/power turbostat: Build-in "Low Power Idle" counters support
tools/power turbostat: Don't make man pages executable
tools/power turbostat: remove blank lines
tools/power turbostat: a small C-states dump readability immprovement
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull time/Y2038 updates from Thomas Gleixner:
- Consolidate SySV IPC UAPI headers
- Convert SySV IPC to the new COMPAT_32BIT_TIME mechanism
- Cleanup the core interfaces and standardize on the ktime_get_* naming
convention.
- Convert the X86 platform ops to timespec64
- Remove the ugly temporary timespec64 hack
* 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86: Convert x86_platform_ops to timespec64
timekeeping: Add more coarse clocktai/boottime interfaces
timekeeping: Add ktime_get_coarse_with_offset
timekeeping: Standardize on ktime_get_*() naming
timekeeping: Clean up ktime_get_real_ts64
timekeeping: Remove timespec64 hack
y2038: ipc: Redirect ipc(SEMTIMEDOP, ...) to compat_ksys_semtimedop
y2038: ipc: Enable COMPAT_32BIT_TIME
y2038: ipc: Use __kernel_timespec
y2038: ipc: Report long times to user space
y2038: ipc: Use ktime_get_real_seconds consistently
y2038: xtensa: Extend sysvipc data structures
y2038: powerpc: Extend sysvipc data structures
y2038: sparc: Extend sysvipc data structures
y2038: parisc: Extend sysvipc data structures
y2038: mips: Extend sysvipc data structures
y2038: arm64: Extend sysvipc compat data structures
y2038: s390: Remove unneeded ipc uapi header files
y2038: ia64: Remove unneeded ipc uapi header files
y2038: alpha: Remove unneeded ipc uapi header files
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
- Core infrastucture work for Y2038 to address the COMPAT interfaces:
+ Add a new Y2038 safe __kernel_timespec and use it in the core
code
+ Introduce config switches which allow to control the various
compat mechanisms
+ Use the new config switch in the posix timer code to control the
32bit compat syscall implementation.
- Prevent bogus selection of CPU local clocksources which causes an
endless reselection loop
- Remove the extra kthread in the clocksource code which has no value
and just adds another level of indirection
- The usual bunch of trivial updates, cleanups and fixlets all over the
place
- More SPDX conversions
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
clocksource/drivers/mxs_timer: Switch to SPDX identifier
clocksource/drivers/timer-imx-tpm: Switch to SPDX identifier
clocksource/drivers/timer-imx-gpt: Switch to SPDX identifier
clocksource/drivers/timer-imx-gpt: Remove outdated file path
clocksource/drivers/arc_timer: Add comments about locking while read GFRC
clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messages
clocksource/drivers/sprd: Fix Kconfig dependency
clocksource: Move inline keyword to the beginning of function declarations
timer_list: Remove unused function pointer typedef
timers: Adjust a kernel-doc comment
tick: Prefer a lower rating device only if it's CPU local device
clocksource: Remove kthread
time: Change nanosleep to safe __kernel_* types
time: Change types to new y2038 safe __kernel_* types
time: Fix get_timespec64() for y2038 safe compat interfaces
time: Add new y2038 safe __kernel_timespec
posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME
time: Introduce CONFIG_COMPAT_32BIT_TIME
time: Introduce CONFIG_64BIT_TIME in architectures
compat: Enable compat_get/put_timespec64 always
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull procfs updates from Al Viro:
"Christoph's proc_create_... cleanups series"
* 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits)
xfs, proc: hide unused xfs procfs helpers
isdn/gigaset: add back gigaset_procinfo assignment
proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields
tty: replace ->proc_fops with ->proc_show
ide: replace ->proc_fops with ->proc_show
ide: remove ide_driver_proc_write
isdn: replace ->proc_fops with ->proc_show
atm: switch to proc_create_seq_private
atm: simplify procfs code
bluetooth: switch to proc_create_seq_data
netfilter/x_tables: switch to proc_create_seq_private
netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data
neigh: switch to proc_create_seq_data
hostap: switch to proc_create_{seq,single}_data
bonding: switch to proc_create_seq_data
rtc/proc: switch to proc_create_single_data
drbd: switch to proc_create_single
resource: switch to proc_create_seq_data
staging/rtl8192u: simplify procfs code
jfs: simplify procfs code
...
|
|
timekeeping suspend/resume calls read_persistent_clock() which takes
rtc_lock. That results in might sleep warnings because at that point
we run with interrupts disabled.
We cannot convert rtc_lock to a raw spinlock as that would trigger
other might sleep warnings.
As a workaround we disable the might sleep warnings by setting
system_state to SYSTEM_SUSPEND before calling sysdev_suspend() and
restoring it to SYSTEM_RUNNING afer sysdev_resume(). There is no lock
contention because hibernate / suspend to RAM is single-CPU at this
point.
In s2idle's case the system_state is set to SYSTEM_SUSPEND before
timekeeping_suspend() which is invoked by the last CPU. In the resume
case it set back to SYSTEM_RUNNING after timekeeping_resume() which is
invoked by the first CPU in the resume case. The other CPUs will block
on tick_freeze_lock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bigeasy: cover s2idle in tick_freeze() / tick_unfreeze()]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
I have run into a couple of drivers using current_kernel_time()
suffering from the y2038 problem, and they could be converted
to using ktime_t, but don't have interfaces that skip the nanosecond
calculation at the moment.
This introduces ktime_get_coarse_with_offset() as a simpler
variant of ktime_get_with_offset(), and adds wrappers for the
three time domains we support with the existing function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-5-arnd@arndb.de
|
|
The current_kernel_time64, get_monotonic_coarse64, getrawmonotonic64,
get_monotonic_boottime64 and timekeeping_clocktai64 interfaces have
rather inconsistent naming, and they differ in the calling conventions
by passing the output either by reference or as a return value.
Rename them to ktime_get_coarse_real_ts64, ktime_get_coarse_ts64,
ktime_get_raw_ts64, ktime_get_boottime_ts64 and ktime_get_clocktai_ts64
respectively, and provide the interfaces with macros or inline
functions as needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-4-arnd@arndb.de
|
