| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Lockdep found a potential deadlock between cpu_hotplug_lock, bpf_event_mutex, and cpuctx_mutex:
[ 13.007000] WARNING: possible circular locking dependency detected
[ 13.007587] 5.0.0-rc3-00018-g2fa53f892422-dirty #477 Not tainted
[ 13.008124] ------------------------------------------------------
[ 13.008624] test_progs/246 is trying to acquire lock:
[ 13.009030] 0000000094160d1d (tracepoints_mutex){+.+.}, at: tracepoint_probe_register_prio+0x2d/0x300
[ 13.009770]
[ 13.009770] but task is already holding lock:
[ 13.010239] 00000000d663ef86 (bpf_event_mutex){+.+.}, at: bpf_probe_register+0x1d/0x60
[ 13.010877]
[ 13.010877] which lock already depends on the new lock.
[ 13.010877]
[ 13.011532]
[ 13.011532] the existing dependency chain (in reverse order) is:
[ 13.012129]
[ 13.012129] -> #4 (bpf_event_mutex){+.+.}:
[ 13.012582] perf_event_query_prog_array+0x9b/0x130
[ 13.013016] _perf_ioctl+0x3aa/0x830
[ 13.013354] perf_ioctl+0x2e/0x50
[ 13.013668] do_vfs_ioctl+0x8f/0x6a0
[ 13.014003] ksys_ioctl+0x70/0x80
[ 13.014320] __x64_sys_ioctl+0x16/0x20
[ 13.014668] do_syscall_64+0x4a/0x180
[ 13.015007] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 13.015469]
[ 13.015469] -> #3 (&cpuctx_mutex){+.+.}:
[ 13.015910] perf_event_init_cpu+0x5a/0x90
[ 13.016291] perf_event_init+0x1b2/0x1de
[ 13.016654] start_kernel+0x2b8/0x42a
[ 13.016995] secondary_startup_64+0xa4/0xb0
[ 13.017382]
[ 13.017382] -> #2 (pmus_lock){+.+.}:
[ 13.017794] perf_event_init_cpu+0x21/0x90
[ 13.018172] cpuhp_invoke_callback+0xb3/0x960
[ 13.018573] _cpu_up+0xa7/0x140
[ 13.018871] do_cpu_up+0xa4/0xc0
[ 13.019178] smp_init+0xcd/0xd2
[ 13.019483] kernel_init_freeable+0x123/0x24f
[ 13.019878] kernel_init+0xa/0x110
[ 13.020201] ret_from_fork+0x24/0x30
[ 13.020541]
[ 13.020541] -> #1 (cpu_hotplug_lock.rw_sem){++++}:
[ 13.021051] static_key_slow_inc+0xe/0x20
[ 13.021424] tracepoint_probe_register_prio+0x28c/0x300
[ 13.021891] perf_trace_event_init+0x11f/0x250
[ 13.022297] perf_trace_init+0x6b/0xa0
[ 13.022644] perf_tp_event_init+0x25/0x40
[ 13.023011] perf_try_init_event+0x6b/0x90
[ 13.023386] perf_event_alloc+0x9a8/0xc40
[ 13.023754] __do_sys_perf_event_open+0x1dd/0xd30
[ 13.024173] do_syscall_64+0x4a/0x180
[ 13.024519] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 13.024968]
[ 13.024968] -> #0 (tracepoints_mutex){+.+.}:
[ 13.025434] __mutex_lock+0x86/0x970
[ 13.025764] tracepoint_probe_register_prio+0x2d/0x300
[ 13.026215] bpf_probe_register+0x40/0x60
[ 13.026584] bpf_raw_tracepoint_open.isra.34+0xa4/0x130
[ 13.027042] __do_sys_bpf+0x94f/0x1a90
[ 13.027389] do_syscall_64+0x4a/0x180
[ 13.027727] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 13.028171]
[ 13.028171] other info that might help us debug this:
[ 13.028171]
[ 13.028807] Chain exists of:
[ 13.028807] tracepoints_mutex --> &cpuctx_mutex --> bpf_event_mutex
[ 13.028807]
[ 13.029666] Possible unsafe locking scenario:
[ 13.029666]
[ 13.030140] CPU0 CPU1
[ 13.030510] ---- ----
[ 13.030875] lock(bpf_event_mutex);
[ 13.031166] lock(&cpuctx_mutex);
[ 13.031645] lock(bpf_event_mutex);
[ 13.032135] lock(tracepoints_mutex);
[ 13.032441]
[ 13.032441] *** DEADLOCK ***
[ 13.032441]
[ 13.032911] 1 lock held by test_progs/246:
[ 13.033239] #0: 00000000d663ef86 (bpf_event_mutex){+.+.}, at: bpf_probe_register+0x1d/0x60
[ 13.033909]
[ 13.033909] stack backtrace:
[ 13.034258] CPU: 1 PID: 246 Comm: test_progs Not tainted 5.0.0-rc3-00018-g2fa53f892422-dirty #477
[ 13.034964] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
[ 13.035657] Call Trace:
[ 13.035859] dump_stack+0x5f/0x8b
[ 13.036130] print_circular_bug.isra.37+0x1ce/0x1db
[ 13.036526] __lock_acquire+0x1158/0x1350
[ 13.036852] ? lock_acquire+0x98/0x190
[ 13.037154] lock_acquire+0x98/0x190
[ 13.037447] ? tracepoint_probe_register_prio+0x2d/0x300
[ 13.037876] __mutex_lock+0x86/0x970
[ 13.038167] ? tracepoint_probe_register_prio+0x2d/0x300
[ 13.038600] ? tracepoint_probe_register_prio+0x2d/0x300
[ 13.039028] ? __mutex_lock+0x86/0x970
[ 13.039337] ? __mutex_lock+0x24a/0x970
[ 13.039649] ? bpf_probe_register+0x1d/0x60
[ 13.039992] ? __bpf_trace_sched_wake_idle_without_ipi+0x10/0x10
[ 13.040478] ? tracepoint_probe_register_prio+0x2d/0x300
[ 13.040906] tracepoint_probe_register_prio+0x2d/0x300
[ 13.041325] bpf_probe_register+0x40/0x60
[ 13.041649] bpf_raw_tracepoint_open.isra.34+0xa4/0x130
[ 13.042068] ? __might_fault+0x3e/0x90
[ 13.042374] __do_sys_bpf+0x94f/0x1a90
[ 13.042678] do_syscall_64+0x4a/0x180
[ 13.042975] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 13.043382] RIP: 0033:0x7f23b10a07f9
[ 13.045155] RSP: 002b:00007ffdef42fdd8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141
[ 13.045759] RAX: ffffffffffffffda RBX: 00007ffdef42ff70 RCX: 00007f23b10a07f9
[ 13.046326] RDX: 0000000000000070 RSI: 00007ffdef42fe10 RDI: 0000000000000011
[ 13.046893] RBP: 00007ffdef42fdf0 R08: 0000000000000038 R09: 00007ffdef42fe10
[ 13.047462] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[ 13.048029] R13: 0000000000000016 R14: 00007f23b1db4690 R15: 0000000000000000
Since tracepoints_mutex will be taken in tracepoint_probe_register/unregister()
there is no need to take bpf_event_mutex too.
bpf_event_mutex is protecting modifications to prog array used in kprobe/perf bpf progs.
bpf_raw_tracepoints don't need to take this mutex.
Fixes: c4f6699dfcb8 ("bpf: introduce BPF_RAW_TRACEPOINT")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
For the original mode of operation it isn't needed, since we report back
errors via PERF_RECORD_LOST records in the ring buffer, but for use in
bpf_perf_event_output() it is convenient to return the errors, basically
-ENOSPC.
Currently bpf_perf_event_output() returns an error indication, the last
thing it does, which is to push it to the ring buffer is that can fail
and if so, this failure won't be reported back to its users, fix it.
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20190118150938.GN5823@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Distributions build drivers as modules, including network and filesystem
drivers which export numerous tracepoints. This enables
bpf(BPF_RAW_TRACEPOINT_OPEN) to attach to those tracepoints.
Signed-off-by: Matt Mullins <mmullins@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A format string consisting of "%p" or "%s" followed by an invalid
specifier (e.g. "%p%\n" or "%s%") could pass the check which
would make format_decode (lib/vsprintf.c) to warn.
Fixes: 9c959c863f82 ("tracing: Allow BPF programs to call bpf_trace_printk()")
Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add the SPDX License header to ease license compliance management.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Commit bf6fa2c893c5 ("bpf: implement bpf_get_current_cgroup_id()
helper") introduced a new helper bpf_get_current_cgroup_id().
The helper has a dependency on CONFIG_CGROUPS.
When CONFIG_CGROUPS is not defined, using the helper will result
the following verifier error:
kernel subsystem misconfigured func bpf_get_current_cgroup_id#80
which is hard for users to interpret.
Guarding the reference to bpf_get_current_cgroup_id_proto with
CONFIG_CGROUPS will result in below better message:
unknown func bpf_get_current_cgroup_id#80
Fixes: bf6fa2c893c5 ("bpf: implement bpf_get_current_cgroup_id() helper")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
bpf has been used extensively for tracing. For example, bcc
contains an almost full set of bpf-based tools to trace kernel
and user functions/events. Most tracing tools are currently
either filtered based on pid or system-wide.
Containers have been used quite extensively in industry and
cgroup is often used together to provide resource isolation
and protection. Several processes may run inside the same
container. It is often desirable to get container-level tracing
results as well, e.g. syscall count, function count, I/O
activity, etc.
This patch implements a new helper, bpf_get_current_cgroup_id(),
which will return cgroup id based on the cgroup within which
the current task is running.
The later patch will provide an example to show that
userspace can get the same cgroup id so it could
configure a filter or policy in the bpf program based on
task cgroup id.
The helper is currently implemented for tracing. It can
be added to other program types as well when needed.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Wang reported that all the testcases for BPF_PROG_TYPE_PERF_EVENT
program type in test_verifier report the following errors on x86_32:
172/p unpriv: spill/fill of different pointers ldx FAIL
Unexpected error message!
0: (bf) r6 = r10
1: (07) r6 += -8
2: (15) if r1 == 0x0 goto pc+3
R1=ctx(id=0,off=0,imm=0) R6=fp-8,call_-1 R10=fp0,call_-1
3: (bf) r2 = r10
4: (07) r2 += -76
5: (7b) *(u64 *)(r6 +0) = r2
6: (55) if r1 != 0x0 goto pc+1
R1=ctx(id=0,off=0,imm=0) R2=fp-76,call_-1 R6=fp-8,call_-1 R10=fp0,call_-1 fp-8=fp
7: (7b) *(u64 *)(r6 +0) = r1
8: (79) r1 = *(u64 *)(r6 +0)
9: (79) r1 = *(u64 *)(r1 +68)
invalid bpf_context access off=68 size=8
378/p check bpf_perf_event_data->sample_period byte load permitted FAIL
Failed to load prog 'Permission denied'!
0: (b7) r0 = 0
1: (71) r0 = *(u8 *)(r1 +68)
invalid bpf_context access off=68 size=1
379/p check bpf_perf_event_data->sample_period half load permitted FAIL
Failed to load prog 'Permission denied'!
0: (b7) r0 = 0
1: (69) r0 = *(u16 *)(r1 +68)
invalid bpf_context access off=68 size=2
380/p check bpf_perf_event_data->sample_period word load permitted FAIL
Failed to load prog 'Permission denied'!
0: (b7) r0 = 0
1: (61) r0 = *(u32 *)(r1 +68)
invalid bpf_context access off=68 size=4
381/p check bpf_perf_event_data->sample_period dword load permitted FAIL
Failed to load prog 'Permission denied'!
0: (b7) r0 = 0
1: (79) r0 = *(u64 *)(r1 +68)
invalid bpf_context access off=68 size=8
Reason is that struct pt_regs on x86_32 doesn't fully align to 8 byte
boundary due to its size of 68 bytes. Therefore, bpf_ctx_narrow_access_ok()
will then bail out saying that off & (size_default - 1) which is 68 & 7
doesn't cleanly align in the case of sample_period access from struct
bpf_perf_event_data, hence verifier wrongly thinks we might be doing an
unaligned access here though underlying arch can handle it just fine.
Therefore adjust this down to machine size and check and rewrite the
offset for narrow access on that basis. We also need to fix corresponding
pe_prog_is_valid_access(), since we hit the check for off % size != 0
(e.g. 68 % 8 -> 4) in the first and last test. With that in place, progs
for tracing work on x86_32.
Reported-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This makes is it possible for bpf prog detach to return -ENOENT.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Currently, suppose a userspace application has loaded a bpf program
and attached it to a tracepoint/kprobe/uprobe, and a bpf
introspection tool, e.g., bpftool, wants to show which bpf program
is attached to which tracepoint/kprobe/uprobe. Such attachment
information will be really useful to understand the overall bpf
deployment in the system.
There is a name field (16 bytes) for each program, which could
be used to encode the attachment point. There are some drawbacks
for this approaches. First, bpftool user (e.g., an admin) may not
really understand the association between the name and the
attachment point. Second, if one program is attached to multiple
places, encoding a proper name which can imply all these
attachments becomes difficult.
This patch introduces a new bpf subcommand BPF_TASK_FD_QUERY.
Given a pid and fd, if the <pid, fd> is associated with a
tracepoint/kprobe/uprobe perf event, BPF_TASK_FD_QUERY will return
. prog_id
. tracepoint name, or
. k[ret]probe funcname + offset or kernel addr, or
. u[ret]probe filename + offset
to the userspace.
The user can use "bpftool prog" to find more information about
bpf program itself with prog_id.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, the bpf_current_task_under_cgroup helper has a check where if
the BPF program is running in_interrupt(), it will return -EINVAL. This
prevents the helper to be used in many useful scenarios, particularly
BPF programs attached to Perf Events.
This commit removes the check. Tested a few NMI (Perf Event) and some
softirq context, the helper returns the correct result.
Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, stackmap and bpf_get_stackid helper are provided
for bpf program to get the stack trace. This approach has
a limitation though. If two stack traces have the same hash,
only one will get stored in the stackmap table,
so some stack traces are missing from user perspective.
This patch implements a new helper, bpf_get_stack, will
send stack traces directly to bpf program. The bpf program
is able to see all stack traces, and then can do in-kernel
processing or send stack traces to user space through
shared map or bpf_perf_event_output.
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
syzbot reported a possible deadlock in perf_event_detach_bpf_prog.
The error details:
======================================================
WARNING: possible circular locking dependency detected
4.16.0-rc7+ #3 Not tainted
------------------------------------------------------
syz-executor7/24531 is trying to acquire lock:
(bpf_event_mutex){+.+.}, at: [<000000008a849b07>] perf_event_detach_bpf_prog+0x92/0x3d0 kernel/trace/bpf_trace.c:854
but task is already holding lock:
(&mm->mmap_sem){++++}, at: [<0000000038768f87>] vm_mmap_pgoff+0x198/0x280 mm/util.c:353
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&mm->mmap_sem){++++}:
__might_fault+0x13a/0x1d0 mm/memory.c:4571
_copy_to_user+0x2c/0xc0 lib/usercopy.c:25
copy_to_user include/linux/uaccess.h:155 [inline]
bpf_prog_array_copy_info+0xf2/0x1c0 kernel/bpf/core.c:1694
perf_event_query_prog_array+0x1c7/0x2c0 kernel/trace/bpf_trace.c:891
_perf_ioctl kernel/events/core.c:4750 [inline]
perf_ioctl+0x3e1/0x1480 kernel/events/core.c:4770
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
SYSC_ioctl fs/ioctl.c:701 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> #0 (bpf_event_mutex){+.+.}:
lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920
__mutex_lock_common kernel/locking/mutex.c:756 [inline]
__mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893
mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908
perf_event_detach_bpf_prog+0x92/0x3d0 kernel/trace/bpf_trace.c:854
perf_event_free_bpf_prog kernel/events/core.c:8147 [inline]
_free_event+0xbdb/0x10f0 kernel/events/core.c:4116
put_event+0x24/0x30 kernel/events/core.c:4204
perf_mmap_close+0x60d/0x1010 kernel/events/core.c:5172
remove_vma+0xb4/0x1b0 mm/mmap.c:172
remove_vma_list mm/mmap.c:2490 [inline]
do_munmap+0x82a/0xdf0 mm/mmap.c:2731
mmap_region+0x59e/0x15a0 mm/mmap.c:1646
do_mmap+0x6c0/0xe00 mm/mmap.c:1483
do_mmap_pgoff include/linux/mm.h:2223 [inline]
vm_mmap_pgoff+0x1de/0x280 mm/util.c:355
SYSC_mmap_pgoff mm/mmap.c:1533 [inline]
SyS_mmap_pgoff+0x462/0x5f0 mm/mmap.c:1491
SYSC_mmap arch/x86/kernel/sys_x86_64.c:100 [inline]
SyS_mmap+0x16/0x20 arch/x86/kernel/sys_x86_64.c:91
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mm->mmap_sem);
lock(bpf_event_mutex);
lock(&mm->mmap_sem);
lock(bpf_event_mutex);
*** DEADLOCK ***
======================================================
The bug is introduced by Commit f371b304f12e ("bpf/tracing: allow
user space to query prog array on the same tp") where copy_to_user,
which requires mm->mmap_sem, is called inside bpf_event_mutex lock.
At the same time, during perf_event file descriptor close,
mm->mmap_sem is held first and then subsequent
perf_event_detach_bpf_prog needs bpf_event_mutex lock.
Such a senario caused a deadlock.
As suggested by Daniel, moving copy_to_user out of the
bpf_event_mutex lock should fix the problem.
Fixes: f371b304f12e ("bpf/tracing: allow user space to query prog array on the same tp")
Reported-by: syzbot+dc5ca0e4c9bfafaf2bae@syzkaller.appspotmail.com
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
== The problem ==
There are use-cases when a program of some type can be attached to
multiple attach points and those attach points must have different
permissions to access context or to call helpers.
E.g. context structure may have fields for both IPv4 and IPv6 but it
doesn't make sense to read from / write to IPv6 field when attach point
is somewhere in IPv4 stack.
Same applies to BPF-helpers: it may make sense to call some helper from
some attach point, but not from other for same prog type.
== The solution ==
Introduce `expected_attach_type` field in in `struct bpf_attr` for
`BPF_PROG_LOAD` command. If scenario described in "The problem" section
is the case for some prog type, the field will be checked twice:
1) At load time prog type is checked to see if attach type for it must
be known to validate program permissions correctly. Prog will be
rejected with EINVAL if it's the case and `expected_attach_type` is
not specified or has invalid value.
2) At attach time `attach_type` is compared with `expected_attach_type`,
if prog type requires to have one, and, if they differ, attach will
be rejected with EINVAL.
The `expected_attach_type` is now available as part of `struct bpf_prog`
in both `bpf_verifier_ops->is_valid_access()` and
`bpf_verifier_ops->get_func_proto()` () and can be used to check context
accesses and calls to helpers correspondingly.
Initially the idea was discussed by Alexei Starovoitov <ast@fb.com> and
Daniel Borkmann <daniel@iogearbox.net> here:
https://marc.info/?l=linux-netdev&m=152107378717201&w=2
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Introduce BPF_PROG_TYPE_RAW_TRACEPOINT bpf program type to access
kernel internal arguments of the tracepoints in their raw form.
>From bpf program point of view the access to the arguments look like:
struct bpf_raw_tracepoint_args {
__u64 args[0];
};
int bpf_prog(struct bpf_raw_tracepoint_args *ctx)
{
// program can read args[N] where N depends on tracepoint
// and statically verified at program load+attach time
}
kprobe+bpf infrastructure allows programs access function arguments.
This feature allows programs access raw tracepoint arguments.
Similar to proposed 'dynamic ftrace events' there are no abi guarantees
to what the tracepoints arguments are and what their meaning is.
The program needs to type cast args properly and use bpf_probe_read()
helper to access struct fields when argument is a pointer.
For every tracepoint __bpf_trace_##call function is prepared.
In assembler it looks like:
(gdb) disassemble __bpf_trace_xdp_exception
Dump of assembler code for function __bpf_trace_xdp_exception:
0xffffffff81132080 <+0>: mov %ecx,%ecx
0xffffffff81132082 <+2>: jmpq 0xffffffff811231f0 <bpf_trace_run3>
where
TRACE_EVENT(xdp_exception,
TP_PROTO(const struct net_device *dev,
const struct bpf_prog *xdp, u32 act),
The above assembler snippet is casting 32-bit 'act' field into 'u64'
to pass into bpf_trace_run3(), while 'dev' and 'xdp' args are passed as-is.
All of ~500 of __bpf_trace_*() functions are only 5-10 byte long
and in total this approach adds 7k bytes to .text.
This approach gives the lowest possible overhead
while calling trace_xdp_exception() from kernel C code and
transitioning into bpf land.
Since tracepoint+bpf are used at speeds of 1M+ events per second
this is valuable optimization.
The new BPF_RAW_TRACEPOINT_OPEN sys_bpf command is introduced
that returns anon_inode FD of 'bpf-raw-tracepoint' object.
The user space looks like:
// load bpf prog with BPF_PROG_TYPE_RAW_TRACEPOINT type
prog_fd = bpf_prog_load(...);
// receive anon_inode fd for given bpf_raw_tracepoint with prog attached
raw_tp_fd = bpf_raw_tracepoint_open("xdp_exception", prog_fd);
Ctrl-C of tracing daemon or cmdline tool that uses this feature
will automatically detach bpf program, unload it and
unregister tracepoint probe.
On the kernel side the __bpf_raw_tp_map section of pointers to
tracepoint definition and to __bpf_trace_*() probe function is used
to find a tracepoint with "xdp_exception" name and
corresponding __bpf_trace_xdp_exception() probe function
which are passed to tracepoint_probe_register() to connect probe
with tracepoint.
Addition of bpf_raw_tracepoint doesn't interfere with ftrace and perf
tracepoint mechanisms. perf_event_open() can be used in parallel
on the same tracepoint.
Multiple bpf_raw_tracepoint_open("xdp_exception", prog_fd) are permitted.
Each with its own bpf program. The kernel will execute
all tracepoint probes and all attached bpf programs.
In the future bpf_raw_tracepoints can be extended with
query/introspection logic.
__bpf_raw_tp_map section logic was contributed by Steven Rostedt
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Fun set of conflict resolutions here...
For the mac80211 stuff, these were fortunately just parallel
adds. Trivially resolved.
In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the
function phy_disable_interrupts() earlier in the file, whilst in
'net-next' the phy_error() call from this function was removed.
In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the
'rt_table_id' member of rtable collided with a bug fix in 'net' that
added a new struct member "rt_mtu_locked" which needs to be copied
over here.
The mlxsw driver conflict consisted of net-next separating
the span code and definitions into separate files, whilst
a 'net' bug fix made some changes to that moved code.
The mlx5 infiniband conflict resolution was quite non-trivial,
the RDMA tree's merge commit was used as a guide here, and
here are their notes:
====================
Due to bug fixes found by the syzkaller bot and taken into the for-rc
branch after development for the 4.17 merge window had already started
being taken into the for-next branch, there were fairly non-trivial
merge issues that would need to be resolved between the for-rc branch
and the for-next branch. This merge resolves those conflicts and
provides a unified base upon which ongoing development for 4.17 can
be based.
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524
(IB/mlx5: Fix cleanup order on unload) added to for-rc and
commit b5ca15ad7e61 (IB/mlx5: Add proper representors support)
add as part of the devel cycle both needed to modify the
init/de-init functions used by mlx5. To support the new
representors, the new functions added by the cleanup patch
needed to be made non-static, and the init/de-init list
added by the representors patch needed to be modified to
match the init/de-init list changes made by the cleanup
patch.
Updates:
drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
prototypes added by representors patch to reflect new function
names as changed by cleanup patch
drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
stage list to match new order from cleanup patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 4bebdc7a85aa ("bpf: add helper bpf_perf_prog_read_value")
added helper bpf_perf_prog_read_value so that perf_event type program
can read event counter and enabled/running time.
This commit, however, introduced a bug which allows this helper
for tracepoint type programs. This is incorrect as bpf_perf_prog_read_value
needs to access perf_event through its bpf_perf_event_data_kern type context,
which is not available for tracepoint type program.
This patch fixed the issue by separating bpf_func_proto between tracepoint
and perf_event type programs and removed bpf_perf_prog_read_value
from tracepoint func prototype.
Fixes: 4bebdc7a85aa ("bpf: add helper bpf_perf_prog_read_value")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This commit adds new field "addr" to bpf_perf_event_data which could be
read and used by bpf programs attached to perf events. The value of the
field is copied from bpf_perf_event_data_kern.addr and contains the
address value recorded by specifying sample_type with PERF_SAMPLE_ADDR
when calling perf_event_open.
Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
syzkaller tried to perform a prog query in perf_event_query_prog_array()
where struct perf_event_query_bpf had an ids_len of 1,073,741,353 and
thus causing a warning due to failed kcalloc() allocation out of the
bpf_prog_array_copy_to_user() helper. Given we cannot attach more than
64 programs to a perf event, there's no point in allowing huge ids_len.
Therefore, allow a buffer that would fix the maximum number of ids and
also add a __GFP_NOWARN to the temporary ids buffer.
Fixes: f371b304f12e ("bpf/tracing: allow user space to query prog array on the same tp")
Fixes: 0911287ce32b ("bpf: fix bpf_prog_array_copy_to_user() issues")
Reported-by: syzbot+cab5816b0edbabf598b3@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, for bpf_trace_printk helper, fake ip address 0x1
is used with comments saying that fake ip will not be printed.
This is indeed true for 4.12 and earlier version, but for
4.13 and later version, the ip address will be printed if
it cannot be resolved with kallsym. Running samples/bpf/tracex5
program and you will have the following in the debugfs
trace_pipe output:
...
<...>-1819 [003] .... 443.497877: 0x00000001: mmap
<...>-1819 [003] .... 443.498289: 0x00000001: syscall=102 (one of get/set uid/pid/gid)
...
The kernel commit changed this behavior is:
commit feaf1283d11794b9d518fcfd54b6bf8bee1f0b4b
Author: Steven Rostedt (VMware) <rostedt@goodmis.org>
Date: Thu Jun 22 17:04:55 2017 -0400
tracing: Show address when function names are not found
...
This patch changed the comment and also altered the fake ip
address to 0x0 as users may think 0x1 has some special meaning
while it doesn't. The new output:
...
<...>-1799 [002] .... 25.953576: 0: mmap
<...>-1799 [002] .... 25.953865: 0: read(fd=0, buf=00000000053936b5, size=512)
...
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Since error-injection framework is not limited to be used
by kprobes, nor bpf. Other kernel subsystems can use it
freely for checking safeness of error-injection, e.g.
livepatch, ftrace etc.
So this separate error-injection framework from kprobes.
Some differences has been made:
- "kprobe" word is removed from any APIs/structures.
- BPF_ALLOW_ERROR_INJECTION() is renamed to
ALLOW_ERROR_INJECTION() since it is not limited for BPF too.
- CONFIG_FUNCTION_ERROR_INJECTION is the config item of this
feature. It is automatically enabled if the arch supports
error injection feature for kprobe or ftrace etc.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Compare instruction pointer with original one on the
stack instead using per-cpu bpf_kprobe_override flag.
This patch also consolidates reset_current_kprobe() and
preempt_enable_no_resched() blocks. Those can be done
in one place.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Check whether error injectable event is on function entry or not.
Currently it checks the event is ftrace-based kprobes or not,
but that is wrong. It should check if the event is on the entry
of target function. Since error injection will override a function
to just return with modified return value, that operation must
be done before the target function starts making stackframe.
As a side effect, bpf error injection is no need to depend on
function-tracer. It can work with sw-breakpoint based kprobe
events too.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2017-12-18
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Allow arbitrary function calls from one BPF function to another BPF function.
As of today when writing BPF programs, __always_inline had to be used in
the BPF C programs for all functions, unnecessarily causing LLVM to inflate
code size. Handle this more naturally with support for BPF to BPF calls
such that this __always_inline restriction can be overcome. As a result,
it allows for better optimized code and finally enables to introduce core
BPF libraries in the future that can be reused out of different projects.
x86 and arm64 JIT support was added as well, from Alexei.
2) Add infrastructure for tagging functions as error injectable and allow for
BPF to return arbitrary error values when BPF is attached via kprobes on
those. This way of injecting errors generically eases testing and debugging
without having to recompile or restart the kernel. Tags for opting-in for
this facility are added with BPF_ALLOW_ERROR_INJECTION(), from Josef.
3) For BPF offload via nfp JIT, add support for bpf_xdp_adjust_head() helper
call for XDP programs. First part of this work adds handling of BPF
capabilities included in the firmware, and the later patches add support
to the nfp verifier part and JIT as well as some small optimizations,
from Jakub.
4) The bpftool now also gets support for basic cgroup BPF operations such
as attaching, detaching and listing current BPF programs. As a requirement
for the attach part, bpftool can now also load object files through
'bpftool prog load'. This reuses libbpf which we have in the kernel tree
as well. bpftool-cgroup man page is added along with it, from Roman.
5) Back then commit e87c6bc3852b ("bpf: permit multiple bpf attachments for
a single perf event") added support for attaching multiple BPF programs
to a single perf event. Given they are configured through perf's ioctl()
interface, the interface has been extended with a PERF_EVENT_IOC_QUERY_BPF
command in this work in order to return an array of one or multiple BPF
prog ids that are currently attached, from Yonghong.
6) Various minor fixes and cleanups to the bpftool's Makefile as well
as a new 'uninstall' and 'doc-uninstall' target for removing bpftool
itself or prior installed documentation related to it, from Quentin.
7) Add CONFIG_CGROUP_BPF=y to the BPF kernel selftest config file which is
required for the test_dev_cgroup test case to run, from Naresh.
8) Fix reporting of XDP prog_flags for nfp driver, from Jakub.
9) Fix libbpf's exit code from the Makefile when libelf was not found in
the system, also from Jakub.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit f371b304f12e ("bpf/tracing: allow user space to
query prog array on the same tp") introduced a perf
ioctl command to query prog array attached to the
same perf tracepoint. The commit introduced a
compilation error under certain config conditions, e.g.,
(1). CONFIG_BPF_SYSCALL is not defined, or
(2). CONFIG_TRACING is defined but neither CONFIG_UPROBE_EVENTS
nor CONFIG_KPROBE_EVENTS is defined.
Error message:
kernel/events/core.o: In function `perf_ioctl':
core.c:(.text+0x98c4): undefined reference to `bpf_event_query_prog_array'
This patch fixed this error by guarding the real definition under
CONFIG_BPF_EVENTS and provided static inline dummy function
if CONFIG_BPF_EVENTS was not defined.
It renamed the function from bpf_event_query_prog_array to
perf_event_query_prog_array and moved the definition from linux/bpf.h
to linux/trace_events.h so the definition is in proximity to
other prog_array related functions.
Fixes: f371b304f12e ("bpf/tracing: allow user space to query prog array on the same tp")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When tracing and networking programs are both attached in the
system and both use event-output helpers that eventually call
into perf_event_output(), then we could end up in a situation
where the tracing attached program runs in user context while
a cls_bpf program is triggered on that same CPU out of softirq
context.
Since both rely on the same per-cpu perf_sample_data, we could
potentially corrupt it. This can only ever happen in a combination
of the two types; all tracing programs use a bpf_prog_active
counter to bail out in case a program is already running on
that CPU out of a different context. XDP and cls_bpf programs
by themselves don't have this issue as they run in the same
context only. Therefore, split both perf_sample_data so they
cannot be accessed from each other.
Fixes: 20b9d7ac4852 ("bpf: avoid excessive stack usage for perf_sample_data")
Reported-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Song Liu <songliubraving@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Error injection is sloppy and very ad-hoc. BPF could fill this niche
perfectly with it's kprobe functionality. We could make sure errors are
only triggered in specific call chains that we care about with very
specific situations. Accomplish this with the bpf_override_funciton
helper. This will modify the probe'd callers return value to the
specified value and set the PC to an override function that simply
returns, bypassing the originally probed function. This gives us a nice
clean way to implement systematic error injection for all of our code
paths.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit e87c6bc3852b ("bpf: permit multiple bpf attachments
for a single perf event") added support to attach multiple
bpf programs to a single perf event.
Although this provides flexibility, users may want to know
what other bpf programs attached to the same tp interface.
Besides getting visibility for the underlying bpf system,
such information may also help consolidate multiple bpf programs,
understand potential performance issues due to a large array,
and debug (e.g., one bpf program which overwrites return code
may impact subsequent program results).
Commit 2541517c32be ("tracing, perf: Implement BPF programs
attached to kprobes") utilized the existing perf ioctl
interface and added the command PERF_EVENT_IOC_SET_BPF
to attach a bpf program to a tracepoint. This patch adds a new
ioctl command, given a perf event fd, to query the bpf program
array attached to the same perf tracepoint event.
The new uapi ioctl command:
PERF_EVENT_IOC_QUERY_BPF
The new uapi/linux/perf_event.h structure:
struct perf_event_query_bpf {
__u32 ids_len;
__u32 prog_cnt;
__u32 ids[0];
};
User space provides buffer "ids" for kernel to copy to.
When returning from the kernel, the number of available
programs in the array is set in "prog_cnt".
The usage:
struct perf_event_query_bpf *query =
malloc(sizeof(*query) + sizeof(u32) * ids_len);
query.ids_len = ids_len;
err = ioctl(pmu_efd, PERF_EVENT_IOC_QUERY_BPF, query);
if (err == 0) {
/* query.prog_cnt is the number of available progs,
* number of progs in ids: (ids_len == 0) ? 0 : query.prog_cnt
*/
} else if (errno == ENOSPC) {
/* query.ids_len number of progs copied,
* query.prog_cnt is the number of available progs
*/
} else {
/* other errors */
}
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
cgropu+bpf prog array has a maximum number of 64 programs.
Let us apply the same limit here.
Fixes: e87c6bc3852b ("bpf: permit multiple bpf attachments for a single perf event")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Commit 9fd29c08e520 ("bpf: improve verifier ARG_CONST_SIZE_OR_ZERO
semantics") relaxed the treatment of ARG_CONST_SIZE_OR_ZERO due to the way
the compiler generates optimized BPF code when checking boundaries of an
argument from C code. A typical example of this optimized code can be
generated using the bpf_perf_event_output helper when operating on variable
memory:
/* len is a generic scalar */
if (len > 0 && len <= 0x7fff)
bpf_perf_event_output(ctx, &perf_map, 0, buf, len);
110: (79) r5 = *(u64 *)(r10 -40)
111: (bf) r1 = r5
112: (07) r1 += -1
113: (25) if r1 > 0x7ffe goto pc+6
114: (bf) r1 = r6
115: (18) r2 = 0xffff94e5f166c200
117: (b7) r3 = 0
118: (bf) r4 = r7
119: (85) call bpf_perf_event_output#25
R5 min value is negative, either use unsigned or 'var &= const'
With this code, the verifier loses track of the variable.
Replacing arg5 with ARG_CONST_SIZE_OR_ZERO is thus desirable since it
avoids this quite common case which leads to usability issues, and the
compiler generates code that the verifier can more easily test:
if (len <= 0x7fff)
bpf_perf_event_output(ctx, &perf_map, 0, buf, len);
or
bpf_perf_event_output(ctx, &perf_map, 0, buf, len & 0x7fff);
No changes to the bpf_perf_event_output helper are necessary since it can
handle a case where size is 0, and an empty frame is pushed.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Commit 9fd29c08e520 ("bpf: improve verifier ARG_CONST_SIZE_OR_ZERO
semantics") relaxed the treatment of ARG_CONST_SIZE_OR_ZERO due to the way
the compiler generates optimized BPF code when checking boundaries of an
argument from C code. A typical example of this optimized code can be
generated using the bpf_probe_read_str helper when operating on variable
memory:
/* len is a generic scalar */
if (len > 0 && len <= 0x7fff)
bpf_probe_read_str(p, len, s);
251: (79) r1 = *(u64 *)(r10 -88)
252: (07) r1 += -1
253: (25) if r1 > 0x7ffe goto pc-42
254: (bf) r1 = r7
255: (79) r2 = *(u64 *)(r10 -88)
256: (bf) r8 = r4
257: (85) call bpf_probe_read_str#45
R2 min value is negative, either use unsigned or 'var &= const'
With this code, the verifier loses track of the variable.
Replacing arg2 with ARG_CONST_SIZE_OR_ZERO is thus desirable since it
avoids this quite common case which leads to usability issues, and the
compiler generates code that the verifier can more easily test:
if (len <= 0x7fff)
bpf_probe_read_str(p, len, s);
or
bpf_probe_read_str(p, len & 0x7fff, s);
No changes to the bpf_probe_read_str helper are necessary since
strncpy_from_unsafe itself immediately returns if the size passed is 0.
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Commit 9c019e2bc4b2 ("bpf: change helper bpf_probe_read arg2 type to
ARG_CONST_SIZE_OR_ZERO") changed arg2 type to ARG_CONST_SIZE_OR_ZERO to
simplify writing bpf programs by taking advantage of the new semantics
introduced for ARG_CONST_SIZE_OR_ZERO which allows <!NULL, 0> arguments.
In order to prevent the helper from actually passing a NULL pointer to
probe_kernel_read, which can happen when <NULL, 0> is passed to the helper,
the commit also introduced an explicit check against size == 0.
After the recent introduction of the ARG_PTR_TO_MEM_OR_NULL type,
bpf_probe_read can not receive a pair of <NULL, 0> arguments anymore, thus
the check is not needed anymore and can be removed, since probe_kernel_read
can correctly handle a <!NULL, 0> call. This also fixes the semantics of
the helper before it gets officially released and bpf programs start
relying on this check.
Fixes: 9c019e2bc4b2 ("bpf: change helper bpf_probe_read arg2 type to ARG_CONST_SIZE_OR_ZERO")
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The helper bpf_probe_read arg2 type is changed
from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO to permit
size-0 buffer. Together with newer ARG_CONST_SIZE_OR_ZERO
semantics which allows non-NULL buffer with size 0,
this allows simpler bpf programs with verifier acceptance.
The previous commit which changes ARG_CONST_SIZE_OR_ZERO semantics
has details on examples.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
NACK'd by x86 maintainer.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Error injection is sloppy and very ad-hoc. BPF could fill this niche
perfectly with it's kprobe functionality. We could make sure errors are
only triggered in specific call chains that we care about with very
specific situations. Accomplish this with the bpf_override_funciton
helper. This will modify the probe'd callers return value to the
specified value and set the PC to an override function that simply
returns, bypassing the originally probed function. This gives us a nice
clean way to implement systematic error injection for all of our code
paths.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During perf event attaching/detaching bpf programs,
the tp_event->prog_array change is protected by the
bpf_event_mutex lock in both attaching and deteching
functions. Although tp_event->prog_array is a rcu
pointer, rcu_derefrence is not needed to access it
since mutex lock will guarantee ordering.
Verified through "make C=2" that sparse
locking check still happy with the new change.
Also change the label name in perf_event_{attach,detach}_bpf_prog
from "out" to "unlock" to reflect the code action after the label.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit afdb09c720b6 ("security: bpf: Add LSM hooks for bpf object related
syscall") included linux/bpf.h in linux/security.h. As a result, bpf
programs including bpf_helpers.h and some other header that ends up
pulling in also security.h, such as several examples under samples/bpf,
fail to compile because bpf_tail_call and bpf_get_stackid are now
"redefined as different kind of symbol".
>From bpf.h:
u64 bpf_tail_call(u64 ctx, u64 r2, u64 index, u64 r4, u64 r5);
u64 bpf_get_stackid(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5);
Whereas in bpf_helpers.h they are:
static void (*bpf_tail_call)(void *ctx, void *map, int index);
static int (*bpf_get_stackid)(void *ctx, void *map, int flags);
Fix this by removing the unused declaration of bpf_tail_call and moving
the declaration of bpf_get_stackid in bpf_trace.c, which is the only
place where it's needed.
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch enables multiple bpf attachments for a
kprobe/uprobe/tracepoint single trace event.
Each trace_event keeps a list of attached perf events.
When an event happens, all attached bpf programs will
be executed based on the order of attachment.
A global bpf_event_mutex lock is introduced to protect
prog_array attaching and detaching. An alternative will
be introduce a mutex lock in every trace_event_call
structure, but it takes a lot of extra memory.
So a global bpf_event_mutex lock is a good compromise.
The bpf prog detachment involves allocation of memory.
If the allocation fails, a dummy do-nothing program
will replace to-be-detached program in-place.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct bpf_verifier_ops contains both verifier ops and operations
used later during program's lifetime (test_run). Split the runtime
ops into a different structure.
BPF_PROG_TYPE() will now append ## _prog_ops or ## _verifier_ops
to the names.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds helper bpf_perf_prog_read_cvalue for perf event based bpf
programs, to read event counter and enabled/running time.
The enabled/running time is accumulated since the perf event open.
The typical use case for perf event based bpf program is to attach itself
to a single event. In such cases, if it is desirable to get scaling factor
between two bpf invocations, users can can save the time values in a map,
and use the value from the map and the current value to calculate
the scaling factor.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hardware pmu counters are limited resources. When there are more
pmu based perf events opened than available counters, kernel will
multiplex these events so each event gets certain percentage
(but not 100%) of the pmu time. In case that multiplexing happens,
the number of samples or counter value will not reflect the
case compared to no multiplexing. This makes comparison between
different runs difficult.
Typically, the number of samples or counter value should be
normalized before comparing to other experiments. The typical
normalization is done like:
normalized_num_samples = num_samples * time_enabled / time_running
normalized_counter_value = counter_value * time_enabled / time_running
where time_enabled is the time enabled for event and time_running is
the time running for event since last normalization.
This patch adds helper bpf_perf_event_read_value for kprobed based perf
event array map, to read perf counter and enabled/running time.
The enabled/running time is accumulated since the perf event open.
To achieve scaling factor between two bpf invocations, users
can can use cpu_id as the key (which is typical for perf array usage model)
to remember the previous value and do the calculation inside the
bpf program.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch does not impact existing functionalities.
It contains the changes in perf event area needed for
subsequent bpf_perf_event_read_value and
bpf_perf_prog_read_value helpers.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
James reported that on MIPS32 bpf_trace_printk() is currently
broken while MIPS64 works fine:
bpf_trace_printk() uses conditional operators to attempt to
pass different types to __trace_printk() depending on the
format operators. This doesn't work as intended on 32-bit
architectures where u32 and long are passed differently to
u64, since the result of C conditional operators follows the
"usual arithmetic conversions" rules, such that the values
passed to __trace_printk() will always be u64 [causing issues
later in the va_list handling for vscnprintf()].
For example the samples/bpf/tracex5 test printed lines like
below on MIPS32, where the fd and buf have come from the u64
fd argument, and the size from the buf argument:
[...] 1180.941542: 0x00000001: write(fd=1, buf= (null), size=6258688)
Instead of this:
[...] 1625.616026: 0x00000001: write(fd=1, buf=009e4000, size=512)
One way to get it working is to expand various combinations
of argument types into 8 different combinations for 32 bit
and 64 bit kernels. Fix tested by James on MIPS32 and MIPS64
as well that it resolves the issue.
Fixes: 9c959c863f82 ("tracing: Allow BPF programs to call bpf_trace_printk()")
Reported-by: James Hogan <james.hogan@imgtec.com>
Tested-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, bpf_trace_printk does not support common formatting
symbol '%i' however vsprintf does and is what eventually gets
called by bpf helper. If users are used to '%i' and currently
make use of it, then bpf_trace_printk will just return with
error without dumping anything to the trace pipe, so just add
support for '%i' to the helper.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This work tries to make the semantics and code around the
narrower ctx access a bit easier to follow. Right now
everything is done inside the .is_valid_access(). Offset
matching is done differently for read/write types, meaning
writes don't support narrower access and thus matching only
on offsetof(struct foo, bar) is enough whereas for read
case that supports narrower access we must check for
offsetof(struct foo, bar) + offsetof(struct foo, bar) +
sizeof(<bar>) - 1 for each of the cases. For read cases of
individual members that don't support narrower access (like
packet pointers or skb->cb[] case which has its own narrow
access logic), we check as usual only offsetof(struct foo,
bar) like in write case. Then, for the case where narrower
access is allowed, we also need to set the aux info for the
access. Meaning, ctx_field_size and converted_op_size have
to be set. First is the original field size e.g. sizeof(<bar>)
as in above example from the user facing ctx, and latter
one is the target size after actual rewrite happened, thus
for the kernel facing ctx. Also here we need the range match
and we need to keep track changing convert_ctx_access() and
converted_op_size from is_valid_access() as both are not at
the same location.
We can simplify the code a bit: check_ctx_access() becomes
simpler in that we only store ctx_field_size as a meta data
and later in convert_ctx_accesses() we fetch the target_size
right from the location where we do convert. Should the verifier
be misconfigured we do reject for BPF_WRITE cases or target_size
that are not provided. For the subsystems, we always work on
ranges in is_valid_access() and add small helpers for ranges
and narrow access, convert_ctx_accesses() sets target_size
for the relevant instruction.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 31fd85816dbe ("bpf: permits narrower load from bpf program
context fields") permits narrower load for certain ctx fields.
The commit however will already generate a masking even if
the prog-specific ctx conversion produces the result with
narrower size.
For example, for __sk_buff->protocol, the ctx conversion
loads the data into register with 2-byte load.
A narrower 2-byte load should not generate masking.
For __sk_buff->vlan_present, the conversion function
set the result as either 0 or 1, essentially a byte.
The narrower 2-byte or 1-byte load should not generate masking.
To avoid unnecessary masking, prog-specific *_is_valid_access
now passes converted_op_size back to verifier, which indicates
the valid data width after perceived future conversion.
Based on this information, verifier is able to avoid
unnecessary marking.
Since we want more information back from prog-specific
*_is_valid_access checking, all of them are packed into
one data structure for more clarity.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, verifier will reject a program if it contains an
narrower load from the bpf context structure. For example,
__u8 h = __sk_buff->hash, or
__u16 p = __sk_buff->protocol
__u32 sample_period = bpf_perf_event_data->sample_period
which are narrower loads of 4-byte or 8-byte field.
This patch solves the issue by:
. Introduce a new parameter ctx_field_size to carry the
field size of narrower load from prog type
specific *__is_valid_access validator back to verifier.
. The non-zero ctx_field_size for a memory access indicates
(1). underlying prog type specific convert_ctx_accesses
supporting non-whole-field access
(2). the current insn is a narrower or whole field access.
. In verifier, for such loads where load memory size is
less than ctx_field_size, verifier transforms it
to a full field load followed by proper masking.
. Currently, __sk_buff and bpf_perf_event_data->sample_period
are supporting narrowing loads.
. Narrower stores are still not allowed as typical ctx stores
are just normal stores.
Because of this change, some tests in verifier will fail and
these tests are removed. As a bonus, rename some out of bound
__sk_buff->cb access to proper field name and remove two
redundant "skb cb oob" tests.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
perf_sample_data consumes 386 bytes on stack, reduce excessive stack
usage and move it to per cpu buffer. It's allowed due to preemption
being disabled for tracing, xdp and tc programs, thus at all times
only one program can run on a specific CPU and programs cannot run
from interrupt. We similarly also handle bpf_pt_regs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
