summaryrefslogtreecommitdiff
path: root/kernel/trace/trace_mmiotrace.c
AgeCommit message (Collapse)Author
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-19tracing: Ignore mmiotrace from kernel commandlineZiqian SUN (Zamir)
The mmiotrace tracer cannot be enabled with ftrace=mmiotrace in kernel commandline. With this patch, noboot is added to the tracer struct, and when system boot with a tracer that has noboot=true, it will print out a warning message and continue booting. Link: http://lkml.kernel.org/r/1505111195-31942-1-git-send-email-zsun@redhat.com Signed-off-by: Ziqian SUN (Zamir) <zsun@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2016-06-20tracing: Expose CPU physical addresses (resource values) for PCI devicesBjorn Helgaas
Previously, mmio_print_pcidev() put "user" addresses in the trace buffer. On most architectures, these are the same as CPU physical addresses, but on microblaze, mips, powerpc, and sparc, they may be something else, typically a raw BAR value (a bus address as opposed to a CPU address). Always expose the CPU physical address to avoid this arch-dependent behavior. This change should have no user-visible effect because this file currently depends on CONFIG_HAVE_MMIOTRACE_SUPPORT, which is only defined for x86, and pci_resource_to_user() is a no-op on x86. Link: http://lkml.kernel.org/r/20160511190657.5898.4248.stgit@bhelgaas-glaptop2.roam.corp.google.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-22kernel/...: convert pr_warning to pr_warnJoe Perches
Use the more common logging method with the eventual goal of removing pr_warning altogether. Miscellanea: - Realign arguments - Coalesce formats - Add missing space between a few coalesced formats Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [kernel/power/suspend.c] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-25tracing: Pass trace_array into trace_buffer_unlock_commit()Steven Rostedt (Red Hat)
In preparation for having trace options be per instance, the trace_array needs to be passed to the trace_buffer_unlock_commit(). The trace_event_buffer_lock_reserve() already passes in the trace_event_file where the trace_array can be derived from. Also added a "__init" to the boot up test event plus function tracing function function_test_events_call(). Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13tracing: Rename ftrace_event_{call,class} to trace_event_{call,class}Steven Rostedt (Red Hat)
The name "ftrace" really refers to the function hook infrastructure. It is not about the trace_events. The structures ftrace_event_call and ftrace_event_class have nothing to do with the function hooks, and are really trace_event structures. Rename ftrace_event_* to trace_event_*. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-19tracing: Do not check return values of trace_seq_p*() for mmio tracerSteven Rostedt (Red Hat)
The return values for trace_seq_printf() and friends are going to be removed and they will become void functions. The mmio tracer checked their return and even did so incorrectly. Some of the funtions which returned the values were never checked themselves. Removing all the checks simplifies the code. Use trace_seq_has_overflowed() and trace_handle_return() where necessary instead. Reviewed-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-11-05tracing: Update event filters for multibufferTom Zanussi
The trace event filters are still tied to event calls rather than event files, which means you don't get what you'd expect when using filters in the multibuffer case: Before: # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 8192 # mkdir /sys/kernel/debug/tracing/instances/test1 # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 2048 # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter bytes_alloc > 2048 Setting the filter in tracing/instances/test1/events shouldn't affect the same event in tracing/events as it does above. After: # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 8192 # mkdir /sys/kernel/debug/tracing/instances/test1 # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter bytes_alloc > 8192 # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter bytes_alloc > 2048 We'd like to just move the filter directly from ftrace_event_call to ftrace_event_file, but there are a couple cases that don't yet have multibuffer support and therefore have to continue using the current event_call-based filters. For those cases, a new USE_CALL_FILTER bit is added to the event_call flags, whose main purpose is to keep the old behavior for those cases until they can be updated with multibuffer support; at that point, the USE_CALL_FILTER flag (and the new associated call_filter_check_discard() function) can go away. The multibuffer support also made filter_current_check_discard() redundant, so this change removes that function as well and replaces it with filter_check_discard() (or call_filter_check_discard() as appropriate). Link: http://lkml.kernel.org/r/f16e9ce4270c62f46b2e966119225e1c3cca7e60.1382620672.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-18tracing: Use trace_seq_puts()/trace_seq_putc() where possiblezhangwei(Jovi)
For string without format specifiers, use trace_seq_puts() or trace_seq_putc(). Link: http://lkml.kernel.org/r/51E3B3AC.1000605@huawei.com Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> [ fixed a trace_seq_putc(s, " ") to trace_seq_putc(s, ' ') ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15tracing: Consolidate max_tr into main trace_array structureSteven Rostedt (Red Hat)
Currently, the way the latency tracers and snapshot feature works is to have a separate trace_array called "max_tr" that holds the snapshot buffer. For latency tracers, this snapshot buffer is used to swap the running buffer with this buffer to save the current max latency. The only items needed for the max_tr is really just a copy of the buffer itself, the per_cpu data pointers, the time_start timestamp that states when the max latency was triggered, and the cpu that the max latency was triggered on. All other fields in trace_array are unused by the max_tr, making the max_tr mostly bloat. This change removes the max_tr completely, and adds a new structure called trace_buffer, that holds the buffer pointer, the per_cpu data pointers, the time_start timestamp, and the cpu where the latency occurred. The trace_array, now has two trace_buffers, one for the normal trace and one for the max trace or snapshot. By doing this, not only do we remove the bloat from the max_trace but the instances of traces can now use their own snapshot feature and not have just the top level global_trace have the snapshot feature and latency tracers for itself. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15tracing: Replace the static global per_cpu arrays with allocated per_cpuSteven Rostedt
The global and max-tr currently use static per_cpu arrays for the CPU data descriptors. But in order to get new allocated trace_arrays, they need to be allocated per_cpu arrays. Instead of using the static arrays, switch the global and max-tr to use allocated data. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-09-12tracing: add filter event logic to special, mmiotrace and boot tracersSteven Rostedt
Now that the pluging tracers use macros to create the structures and automate the exporting of their formats to the format files, they also automatically get a filter file. This patch adds the code to implement the filter logic in the trace recordings. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-04tracing: pass around ring buffer instead of tracerSteven Rostedt
The latency tracers (irqsoff and wakeup) can swap trace buffers on the fly. If an event is happening and has reserved data on one of the buffers, and the latency tracer swaps the global buffer with the max buffer, the result is that the event may commit the data to the wrong buffer. This patch changes the API to the trace recording to be recieve the buffer that was used to reserve a commit. Then this buffer can be passed in to the commit. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-07tracing: use macros to denote usec and nsec per secondLi Zefan
Impact: cleanup Use USEC_PER_SEC and NSEC_PER_SEC instead of 1000000 and 1000000000. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <49CC7870.9000309@cn.fujitsu.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-03-19tracing: remove recording function depth from trace_printkSteven Rostedt
The function depth in trace_printk was to facilitate the function graph output. Now that the function graph calculates the depth within the trace output, we no longer need to record the depth when the trace_printk is called. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12tracing/core: bring back raw trace_printk for dynamic formats stringsFrederic Weisbecker
Impact: fix callsites with dynamic format strings Since its new binary implementation, trace_printk() internally uses static containers for the format strings on each callsites. But the value is assigned once at build time, which means that it can't take dynamic formats. So this patch unearthes the raw trace_printk implementation for the callers that will need trace_printk to be able to carry these dynamic format strings. The trace_printk() macro will use the appropriate implementation for each callsite. Most of the time however, the binary implementation will still be used. The other impact of this patch is that mmiotrace_printk() will use the old implementation because it calls the low level trace_vprintk and we can't guess here whether the format passed in it is dynamic or not. Some parts of this patch have been written by Steven Rostedt (most notably the part that chooses the appropriate implementation for each callsites). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-06tracing/core: drop the old trace_printk() implementation in favour of ↵Frederic Weisbecker
trace_bprintk() Impact: faster and lighter tracing Now that we have trace_bprintk() which is faster and consume lesser memory than trace_printk() and has the same purpose, we can now drop the old implementation in favour of the binary one from trace_bprintk(), which means we move all the implementation of trace_bprintk() to trace_printk(), so the Api doesn't change except that we must now use trace_seq_bprintk() to print the TRACE_PRINT entries. Some changes result of this: - Previously, trace_bprintk depended of a single tracer and couldn't work without. This tracer has been dropped and the whole implementation of trace_printk() (like the module formats management) is now integrated in the tracing core (comes with CONFIG_TRACING), though we keep the file trace_printk (previously trace_bprintk.c) where we can find the module management. Thus we don't overflow trace.c - changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries. - change a bit trace_printk/trace_vprintk macros to support non-builtin formats constants, and fix 'const' qualifiers warnings. But this is all transparent for developers. - etc... V2: - Rebase against last changes - Fix mispell on the changelog V3: - Rebase against last changes (moving trace_printk() to kernel.h) Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-06tracing: Introduce trace_buffer_{lock_reserve,unlock_commit}Arnaldo Carvalho de Melo
Impact: new API These new functions do what previously was being open coded, reducing the number of details ftrace plugin writers have to worry about. It also standardizes the handling of stacktrace, userstacktrace and other trace options we may introduce in the future. With this patch, for instance, the blk tracer (and some others already in the tree) can use the "userstacktrace" /d/tracing/trace_options facility. $ codiff /tmp/vmlinux.before /tmp/vmlinux.after linux-2.6-tip/kernel/trace/trace.c: trace_vprintk | -5 trace_graph_return | -22 trace_graph_entry | -26 trace_function | -45 __ftrace_trace_stack | -27 ftrace_trace_userstack | -29 tracing_sched_switch_trace | -66 tracing_stop | +1 trace_seq_to_user | -1 ftrace_trace_special | -63 ftrace_special | +1 tracing_sched_wakeup_trace | -70 tracing_reset_online_cpus | -1 13 functions changed, 2 bytes added, 355 bytes removed, diff: -353 linux-2.6-tip/block/blktrace.c: __blk_add_trace | -58 1 function changed, 58 bytes removed, diff: -58 linux-2.6-tip/kernel/trace/trace.c: trace_buffer_lock_reserve | +88 trace_buffer_unlock_commit | +86 2 functions changed, 174 bytes added, diff: +174 /tmp/vmlinux.after: 16 functions changed, 176 bytes added, 413 bytes removed, diff: -237 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Frédéric Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-06ring_buffer: remove unused flags parameterArnaldo Carvalho de Melo
Impact: API change, cleanup >From ring_buffer_{lock_reserve,unlock_commit}. $ codiff /tmp/vmlinux.before /tmp/vmlinux.after linux-2.6-tip/kernel/trace/trace.c: trace_vprintk | -14 trace_graph_return | -14 trace_graph_entry | -10 trace_function | -8 __ftrace_trace_stack | -8 ftrace_trace_userstack | -8 tracing_sched_switch_trace | -8 ftrace_trace_special | -12 tracing_sched_wakeup_trace | -8 9 functions changed, 90 bytes removed, diff: -90 linux-2.6-tip/block/blktrace.c: __blk_add_trace | -1 1 function changed, 1 bytes removed, diff: -1 /tmp/vmlinux.after: 10 functions changed, 91 bytes removed, diff: -91 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Frédéric Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16trace: clean up format errors in calls to trace_seq_printfSteven Rostedt
After adding the printf format checking for trace_seq_printf, several warnings now show up. This patch cleans them up. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-11mmiotrace: count events lost due to not recordingPekka Paalanen
Impact: enhances lost events counting in mmiotrace The tracing framework, or the ring buffer facility it uses, has a switch to stop recording data. When recording is off, the trace events will be lost. The framework does not count these, so mmiotrace has to count them itself. Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29ftrace: set up trace event hash infrastructureSteven Rostedt
Impact: simplify/generalize/refactor trace.c The trace.c file is becoming more difficult to maintain due to the growing number of events. There is several formats that an event may be printed. This patch sets up the infrastructure of an event hash to allow for events to register how they should be printed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29ftrace: remove obsolete print continue functionalitySteven Rostedt
Impact: cleanup, remove obsolete code Now that the ring buffer used by ftrace allows for variable length entries, we do not need the 'cont' feature of the buffer. This code makes other parts of ftrace more complex and by removing this it simplifies the ftrace code. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19ftrace: introduce tracing_reset_online_cpus() helperPekka J Enberg
Impact: cleanup This patch factors out common code from multiple tracers into a tracing_reset_online_cpus() function and converts the tracers to use it. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04tracing/function-graph-tracer: handle ftrace_printk entriesFrederic Weisbecker
Handle the TRACE_PRINT entries from the function grapg tracer and output them as a C comment just below the function that called it, as if it was a comment inside this function. Example with an ftrace_printk inside might_sleep() function: void __might_sleep(char *file, int line) { static unsigned long prev_jiffy; /* ratelimiting */ ftrace_printk("Hi I'm a comment in might_sleep() :-)"); A chunk of a resulting trace: 0) | _reiserfs_free_block() { 0) | reiserfs_read_bitmap_block() { 0) | __bread() { 0) | __getblk() { 0) | __find_get_block() { 0) 0.698 us | mark_page_accessed(); 0) 2.267 us | } 0) | __might_sleep() { 0) | /* Hi I'm a comment in might_sleep() :-) */ 0) 1.321 us | } 0) 5.872 us | } 0) 7.313 us | } 0) 8.718 us | } And this patch brings two minor fixes: - The newline after a switch-out task has disappeared - The "|" sign just before the cpu number on task-switch has been deleted. 0) 0.616 us | pick_next_task_rt(); 0) 1.457 us | _spin_trylock(); 0) 0.653 us | _spin_unlock(); 0) 0.728 us | _spin_trylock(); 0) 0.631 us | _spin_unlock(); 0) 0.729 us | native_load_sp0(); 0) 0.593 us | native_load_tls(); ------------------------------------------ 0) cat-2834 => migrati-3 ------------------------------------------ 0) | finish_task_switch() { 0) 0.841 us | _spin_unlock_irq(); 0) 0.616 us | post_schedule_rt(); 0) 3.882 us | } Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24Merge branches 'tracing/branch-tracer', 'tracing/fastboot', ↵Ingo Molnar
'tracing/ftrace', 'tracing/function-return-tracer', 'tracing/power-tracer', 'tracing/powerpc', 'tracing/ring-buffer', 'tracing/stack-tracer' and 'tracing/urgent' into tracing/core
2008-11-23x86, mmiotrace: fix buffer overrun detectionPekka Paalanen
Impact: fix mmiotrace overrun tracing When ftrace framework moved to use the ring buffer facility, the buffer overrun detection was broken after 2.6.27 by commit | commit 3928a8a2d98081d1bc3c0a84a2d70e29b90ecf1c | Author: Steven Rostedt <rostedt@goodmis.org> | Date: Mon Sep 29 23:02:41 2008 -0400 | | ftrace: make work with new ring buffer | | This patch ports ftrace over to the new ring buffer. The detection is now fixed by using the ring buffer API. When mmiotrace detects a buffer overrun, it will report the number of lost events. People reading an mmiotrace log must know if something was missed, otherwise the data may not make sense. Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16tracing/ftrace: change the type of the init() callbackFrederic Weisbecker
Impact: extend the ->init() method with the ability to fail This bring a way to know if the initialization of a tracer successed. A tracer must return 0 on success and a traditional error (ie: -ENOMEM) if it fails. If a tracer fails to init, it is free to print a detailed warn. The tracing api will not and switch to a new tracer will just return the error from the init callback. Note: this will be used for the return tracer. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-08ftrace: remove trace array ctrlSteven Rostedt
Impact: remove obsolete variable in trace_array structure With the new start / stop method of ftrace, the ctrl variable in the trace_array structure is now obsolete. Remove it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-08ftrace: remove ctrl_update methodSteven Rostedt
Impact: Remove the ctrl_update tracer method With the new quick start/stop method of tracing, the ctrl_update method is out of date. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: preempt disable over interrupt disableSteven Rostedt
With the new ring buffer infrastructure in ftrace, I'm trying to make ftrace a little more light weight. This patch converts a lot of the local_irq_save/restore into preempt_disable/enable. The original preempt count in a lot of cases has to be sent in as a parameter so that it can be recorded correctly. Some places were recording it incorrectly before anyway. This is also laying the ground work to make ftrace a little bit more reentrant, and remove all locking. The function tracers must still protect from reentrancy. Note: All the function tracers must be careful when using preempt_disable. It must do the following: resched = need_resched(); preempt_disable_notrace(); [...] if (resched) preempt_enable_no_resched_notrace(); else preempt_enable_notrace(); The reason is that if this function traces schedule() itself, the preempt_enable_notrace() will cause a schedule, which will lead us into a recursive failure. If we needed to reschedule before calling preempt_disable, we should have already scheduled. Since we did not, this is most likely that we should not and are probably inside a schedule function. If resched was not set, we still need to catch the need resched flag being set when preemption was off and the if case at the end will catch that for us. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: type cast filter+verifierSteven Rostedt
The mmiotrace map had a bug that would typecast the entry from the trace to the wrong type. That is a known danger of C typecasts, there's absolutely zero checking done on them. Help that problem a bit by using a GCC extension to implement a type filter that restricts the types that a trace record can be cast into, and by adding a dynamic check (in debug mode) to verify the type of the entry. This patch adds a macro to assign all entries of ftrace using the type of the variable and checking the entry id. The typecasts are now done in the macro for only those types that it knows about, which should be all the types that are allowed to be read from the tracer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14tracing/ftrace: adapt mmiotrace to the new type of print_lineFrederic Weisbecker
Adapt mmiotrace to the new print_line type. By default, it ignores (and consumes) types it doesn't support. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: take advantage of variable length entriesSteven Rostedt
Now that the underlining ring buffer for ftrace now hold variable length entries, we can take advantage of this by only storing the size of the actual event into the buffer. This happens to increase the number of entries in the buffer dramatically. We can also get rid of the "trace_cont" operation, but I'm keeping that until we have no more users. Some of the ftrace tracers can now change their code to adapt to this new feature. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: make work with new ring bufferSteven Rostedt
This patch ports ftrace over to the new ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14mmiotrace: handle TRACE_PRINT entriesPekka Paalanen
Also make trace_seq_print_cont() non-static, and add a newline if the seq buffer can't hold all data. Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14x86 mmiotrace: implement mmiotrace_printk()Pekka Paalanen
Offer mmiotrace users a function to inject markers from inside the kernel. This depends on the trace_vprintk() patch. Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: move mmiotrace functions out of trace.cPekka Paalanen
Moves the mmiotrace specific functions from trace.c to trace_mmiotrace.c. Functions trace_wake_up(), tracing_get_trace_entry(), and tracing_generic_entry_update() are therefore made available outside trace.c. Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14ftrace: new continue entry - separate out from trace_entrySteven Rostedt
Some tracers will need to work with more than one entry. In order to do this the trace_entry structure was split into two fields. One for the start of all entries, and one to continue an existing entry. The trace_entry structure now has a "field" entry that consists of the previous content of the trace_entry, and a "cont" entry that is just a string buffer the size of the "field" entry. Thanks to Andrew Morton for suggesting this idea. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-24x86 mmiotrace: use resource_size_t for phys addressesPekka Paalanen
Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-24mmiotrace: do not print bogus pid for maps eitherPekka Paalanen
Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-24mmiotrace: print overrun countsPekka Paalanen
Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-24mmiotrace: print header using the read hook.Pekka Paalanen
Now the header is printed only for `trace_pipe' file. Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-24x86 mmiotrace: Do not print bogus pidPekka Paalanen
Non-zero pid indicates the MMIO access originated in user space. We do not catch that kind of accesses yet, so always print zero for now. Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-24ftrace: mmiotrace update, #2Pekka Paalanen
another weekend, another patch. This should apply on top of my previous patch from March 23rd. Summary of changes: - Print PCI device list in output header - work around recursive probe hits on SMP - refactor dis/arm_kmmio_fault_page() and add check for page levels - remove un/reference_kmmio(), the die notifier hook is registered permanently into the list - explicitly check for single stepping in die notifier callback I have tested this version on my UP Athlon64 desktop with Nouveau, and SMP Core 2 Duo laptop with the proprietary nvidia driver. Both systems are 64-bit. One previously unknown bug crept into daylight: the ftrace framework's output routines print the first entry last after buffer has wrapped around. The most important regressions compared to non-ftrace mmiotrace at this time are: - failure of trace_pipe file - illegal lines in output file - unaware of losing data due to buffer full Personally I'd like to see these three solved before submitting to mainline. Other issues may come up once we know when we lose events. Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-24ftrace: mmiotrace, updatesPekka Paalanen
here is a patch that makes mmiotrace work almost well within the tracing framework. The patch applies on top of my previous patch. I have my own output formatting in place now. Summary of changes: - fix the NULL dereference that was due to not calling tracing_reset() - add print_line() callback into struct tracer - implement print_line() for mmiotrace, producing up-to-spec text - add my output header, but that is not really called in the right place - rewrote the main structs in mmiotrace - added two new trace entry types: TRACE_MMIO_RW and TRACE_MMIO_MAP - made some functions in trace.c non-static - check current==NULL in tracing_generic_entry_update() - fix(?) comparison in trace_seq_printf() Things seem to work fine except a few issues. Markers (text lines injected into mmiotrace log) are missing, I did not feel hacking them in before we have variable length entries. My output header is printed only for 'trace' file, but not 'trace_pipe'. For some reason, despite my quick fix, iter->trace is NULL in print_trace_line() when called from 'trace_pipe' file, which means I don't get proper output formatting. I only tried by loading nouveau.ko, which just detects the card, and that is traced fine. I didn't try further. Map, two reads and unmap. Works perfectly. I am missing the information about overflows, I'd prefer to have a counter for lost events. I didn't try, but I guess currently there is no way of knowning when it overflows? So, not too far from being fully operational, it seems :-) And looking at the diffstat, there also is some 700-900 lines of user space code that just became obsolete. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-24ftrace: add mmiotrace pluginPekka Paalanen
On Sat, 22 Mar 2008 13:07:47 +0100 Ingo Molnar <mingo@elte.hu> wrote: > > > i'd suggest the following: pull x86.git and sched-devel.git into a > > > single tree [the two will combine without rejects]. Then try to add a > > > kernel/tracing/trace_mmiotrace.c ftrace plugin. The trace_sysprof.c > > > plugin might be a good example. > > > > I did this and now I have mmiotrace enabled/disabled via the tracing > > framework (what do we call this, since ftrace is one of the tracers?). > > cool! could you send the patches for that? (even if they are not fully > functional yet) Patch attached in the end. Nice to see how much code disappeared. I tried to mark all the features I had to break with XXX-comments. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>