summaryrefslogtreecommitdiff
path: root/kernel/trace/trace_stat.c
AgeCommit message (Collapse)Author
2020-01-24tracing: Fix tracing_stat return values in error handling pathsLuis Henriques
tracing_stat_init() was always returning '0', even on the error paths. It now returns -ENODEV if tracing_init_dentry() fails or -ENOMEM if it fails to created the 'trace_stat' debugfs directory. Link: http://lkml.kernel.org/r/1410299381-20108-1-git-send-email-luis.henriques@canonical.com Fixes: ed6f1c996bfe4 ("tracing: Check return value of tracing_init_dentry()") Signed-off-by: Luis Henriques <luis.henriques@canonical.com> [ Pulled from the archeological digging of my INBOX ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-24tracing: Fix very unlikely race of registering two stat tracersSteven Rostedt (VMware)
Looking through old emails in my INBOX, I came across a patch from Luis Henriques that attempted to fix a race of two stat tracers registering the same stat trace (extremely unlikely, as this is done in the kernel, and probably doesn't even exist). The submitted patch wasn't quite right as it needed to deal with clean up a bit better (if two stat tracers were the same, it would have the same files). But to make the code cleaner, all we needed to do is to keep the all_stat_sessions_mutex held for most of the registering function. Link: http://lkml.kernel.org/r/1410299375-20068-1-git-send-email-luis.henriques@canonical.com Fixes: 002bb86d8d42f ("tracing/ftrace: separate events tracing and stats tracing engine") Reported-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-11-14tracing: Use generic type for comparator functionAndy Shevchenko
Comparator function type, cmp_func_t, is defined in the types.h, use it in the code. Link: http://lkml.kernel.org/r/20191007135656.37734-3-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-10-12tracing: Add locked_down checks to the open calls of files created for tracefsSteven Rostedt (VMware)
Added various checks on open tracefs calls to see if tracefs is in lockdown mode, and if so, to return -EPERM. Note, the event format files (which are basically standard on all machines) as well as the enabled_functions file (which shows what is currently being traced) are not lockde down. Perhaps they should be, but it seems counter intuitive to lockdown information to help you know if the system has been modified. Link: http://lkml.kernel.org/r/CAHk-=wj7fGPKUspr579Cii-w_y60PtRaiDgKuxVtBAMK0VNNkA@mail.gmail.com Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22kernel/...: convert pr_warning to pr_warnJoe Perches
Use the more common logging method with the eventual goal of removing pr_warning altogether. Miscellanea: - Realign arguments - Coalesce formats - Add missing space between a few coalesced formats Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [kernel/power/suspend.c] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-03tracing: Convert the tracing facility over to use tracefsSteven Rostedt (Red Hat)
debugfs was fine for the tracing facility as a quick way to get an interface. Now that tracing has matured, it should separate itself from debugfs such that it can be mounted separately without needing to mount all of debugfs with it. That is, users resist using tracing because it requires mounting debugfs. Having tracing have its own file system lets users get the features of tracing without needing to bring in the rest of the kernel's debug infrastructure. Another reason for tracefs is that debubfs does not support mkdir. Currently, to create instances, one does a mkdir in the tracing/instance directory. This is implemented via a hack that forces debugfs to do something it is not intended on doing. By converting over to tracefs, this hack can be removed and mkdir can be properly implemented. This patch does not address this yet, but it lays the ground work for that to be done. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-01-22tracing: Use IS_ERR() check for return value of tracing_init_dentry()Steven Rostedt (Red Hat)
tracing_init_dentry() will soon return NULL as a valid pointer for the top level tracing directroy. NULL can not be used as an error value. Instead, switch to ERR_PTR() and check the return status with IS_ERR(). Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-11-05trace/trace_stat: use rbtree postorder iteration helper instead of opencodingCody P Schafer
Use rbtree_postorder_for_each_entry_safe() to destroy the rbtree instead of opencoding an alternate postorder iteration that modifies the tree Link: http://lkml.kernel.org/r/1383345566-25087-2-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-04-12tracing: Check return value of tracing_init_dentry()Namhyung Kim
Check return value and bail out if it's NULL. Link: http://lkml.kernel.org/r/1365553093-10180-2-git-send-email-namhyung@kernel.org Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: stable@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-08-17trace_stat: Fix missing entry in stat fileLi Zefan
One entry is missing in the output of a stat file. The cause is, when stat_seq_start() is called the 2nd time, we should start from the (pos-1)th elem in the rbtree but not pos, because pos == 0 is the header. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A891A65.70009@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-11Merge branch 'linus' into tracing/coreIngo Molnar
Conflicts: kernel/trace/trace_events_filter.c We use the tracing/core version. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-23tracing/stat: Fix seqfile memory leakLi Zefan
Every time we cat a trace_stat file, we leak memory allocated by seq_open(). Also fix memory leak in a failure path in tracing_stat_open(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A67D92B.4060704@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-07-10tracing/stat: Add stat_release() callbackLai Jiangshan
Add stat_release() callback to struct tracer_stat, so a stat tracer can release it's entries after the stat file has been read out. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A51B16A.6020708@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-24trace_stat: Don't increment @pos in seq start()Li Zefan
It's wrong to increment @pos in stat_seq_start(). It causes some stat entries lost when reading stat file, if the output of the file is larger than PAGE_SIZE. Reviewed-by: Liming Wang <liming.wang@windriver.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A418716.90209@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-02tracing/stat: remove unappropriate safe walk on listFrederic Weisbecker
register_stat_tracer() uses list_for_each_entry_safe to check whether a tracer is already present in the list. But we don't delete anything from the list here, so we don't need the safe version [ Impact: cleanup list use is stat tracing ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02tracing/stat: do some cleanupsLi Zefan
- remove duplicate code in stat_seq_init() - update comments to reflect the change from stat list to stat rbtree [ Impact: clean up ] Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02tracing/stat: remember to free root nodeLi Zefan
When closing a trace_stat file, we destroy the rbtree constructed during file open, but there is memory leak that the root node is not freed. [ Impact: fix memory leak when closing a trace_stat file ] Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02tracing/stat: change dummpy_cmp() to return -1Li Zefan
Currently the output of trace_stat/workqueues is totally reversed: # cat /debug/tracing/trace_stat/workqueues ... 1 17 17 210 37 `-blk_unplug_work+0x0/0x57 1 3779 3779 181 11 |-cfq_kick_queue+0x0/0x2f 1 3796 3796 kblockd/1:120 ... The correct output should be: 1 3796 3796 kblockd/1:120 1 3779 3779 181 11 |-cfq_kick_queue+0x0/0x2f 1 17 17 210 37 `-blk_unplug_work+0x0/0x57 It's caused by "tracing/stat: replace linked list by an rbtree for sorting" (53059c9b67a62a3dc8c80204d3da42b9267ea5a0). dummpy_cmp() should return -1, so rb_node will always be inserted as right-most node in the rbtree, thus we sort the output in ascending order. [ Impact: fix the output of trace_stat/workqueues ] Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02tracing/stat: replace linked list by an rbtree for sortingFrederic Weisbecker
When the stat tracing framework prepares the entries from a tracer to output them to the user, it starts by computing a linear sort through a linked list to give the entries ordered by relevance to the user. This is quite ugly and causes a small latency when we begin to read the file. This patch changes that by turning the linked list into a red-black tree. Athough the whole iteration using the start and next tracer callbacks while opening the file remain the same, it is now much more fast and scalable. The rbtree guarantees O(log(n)) insertions whereas a linked list with linear sorting brought us a O(n) despair. Now the (visible) latency has disapeared. [ Impact: kill the latency while starting to read a stat tracer file ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02tracing/stat: replace trace_stat_session by stat_sessionFrederic Weisbecker
The "trace" prefix in struct trace_stat_session type is annoying while reading the trace_stat.c file. It makes the lines longer, and is not that much useful to explain the sense of this type. Just keep "struct stat_session" for this type. [ Impact: make the code a bit more readable ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-04-07Merge branch 'linus' into tracing/coreIngo Molnar
Merge reason: update to upstream tracing facilities Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25trace_stat: keep original orderLai Jiangshan
Impact: make trace_stat files show items with the original order trace_stat tracer reverse the items, it makes the output looks a little ugly. Example, when we read trace_stat/workqueues, we get cpu#7's stat. at first, and then cpu#6... cpu#0. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Steven Rostedt <srostedt@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49C9F23F.5040307@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25trace_stat: don't call seq_printf() in seq_operation->start()Lai Jiangshan
Impact: Fix incorrect way using seq_file's API Use SEQ_START_TOKEN instead of calling ->stat_headers() int seq_operation->start(). Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Steven Rostedt <srostedt@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> LKML-Reference: <49C9EAE5.5070202@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-24tracing: add handler to trace_statSteven Rostedt
Currently, if a trace_stat user wants a handle to some private data, the trace_stat infrastructure does not supply a way to do that. This patch passes the trace_stat structure to the start function of the trace_stat code. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-24tracing: fix memory leak in trace_statSteven Rostedt
If the function profiler does not have any items recorded and one were to cat the function stat file, the kernel would take a BUG with a NULL pointer dereference. Looking further into this, I found that returning NULL from stat_start did not stop the stat logic, and would later call stat_next. This breaks from the way seq_file works, so I looked into fixing the stat code. This is where I noticed that the last next_entry is never freed. It is allocated, and if the stat_next returns NULL, the code breaks out of the loop, unlocks the mutex and exits. We never link the next_entry nor do we free it. Thus it is a real memory leak. This patch rearranges the code a bit to not only fix the memory leak, but also to act more like seq_file where nothing is printed if there is nothing to print. That is, stat_start returns NULL. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-17tracing: fix typing mistake in hint message and commentsWenji Huang
Impact: cleanup Fix incorrect hint message in code and typos in comments. Signed-off-by: Wenji Huang <wenji.huang@oracle.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-01-15tracing: trace_stat.c cleanupIngo Molnar
Impact: cleanup - whitespace / code alignment cleanups - avoid unnecessary forward prototype by reordering functions Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-15tracing/ftrace: add missing unlock in register_stat_tracer()Li Zefan
We should unlock all_stat_sessions_mutex before returning failure. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14tracing/ftrace: separate events tracing and stats tracing engineFrederic Weisbecker
Impact: tracing's Api change Currently, the stat tracing depends on the events tracing. When you switch to a new tracer, the stats files of the previous tracer will disappear. But it's more scalable to separate those two engines. This way, we can keep the stat files of one or several tracers when we want, without bothering of multiple tracer stat files or tracer switching. To build/destroys its stats files, a tracer just have to call register_stat_tracer/unregister_stat_tracer everytimes it wants to. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-11tracing/ftrace: handle more than one stat file per tracerFrederic Weisbecker
Impact: new API for tracers Make the stat tracing API reentrant. And also provide the new directory /debugfs/tracing/trace_stat which will contain all the stat files for the current active tracer. Now a tracer will, if desired, want to provide a zero terminated array of tracer_stat structures. Each one contains the callbacks necessary for one stat file. It have to provide at least a name for its stat file, an iterator with stat_start/start_next callback and an output callback for one stat entry. Also adapt the branch tracer to this new API. We create two files "all" and "annotated" inside the /debugfs/tracing/trace_stat directory, making the both stats simultaneously available instead of needing to change an option to switch from one stat file to another. The output of these stats haven't changed. Changes in v2: _ Apply the previous memory leak fix (rebase against tip/master) Changes in v3: _ Merge the patch that adapted the branch tracer to this Api in this patch to not break the kernel build. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-07trace: clean up funny line breaks in stat_seq_showSteven Rostedt
Impact: clean up Andrew Morton pointed out that the entry assignment in stat_seq_show did not need to be done in the declaration, causing funny line breaks. This patch makes it a bit more pleasing on the eyes. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-07tracing/ftrace: fix a memory leak in stat tracingFrederic Weisbecker
Impact: fix memory leak This patch fixes a memory leak inside reset_stat_list(). The freeing loop iterated only once. Also turn the stat_list into a simple struct list_head, which simplify the code and avoid an unused static pointer. Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29tracing/ftrace: provide the base infrastructure for histogram tracingFrederic Weisbecker
Impact: extend the tracing API The goal of this patch is to normalize and make more easy the implementation of statistical (histogram) tracing. It implements a trace_stat file into the /debugfs/tracing directory where one can print a one-shot output of statistics/histogram entries. A tracer has to provide two basic iterator callbacks: stat_start() => the first entry stat_next(prev, idx) => the next one. Note that it is adapted for arrays or hash tables or lists.... since it provides a pointer to the previous entry and the current index of the iterator. These two callbacks are called to get a snapshot of the statistics at each opening of the trace_stat file because. The values are so updated between two "cat trace_stat". And the tracer is free to lock its datas during the iteration to keep consistent values. Since it is almost always interesting to sort statisticals values to address the problems by priority, this infrastructure provides a "sorting" of the stat entries too if desired. A tracer has just to provide a stat_cmp callback to compare two entries and the stat tracing infrastructure will build a sorted list of the given entries. A last callback, called stat_headers, can be implemented by a tracer to output headers on its trace. If one of these callbacks is changed on runtime, it just have to signal it to the stat tracing API by calling the init_tracer_stat() helper. Changes in V2: - Fix a memory leak if the user opens multiple times the trace_stat file without closing it. Now we always free our list before rebuilding it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>