summaryrefslogtreecommitdiff
path: root/kernel/trace
AgeCommit message (Collapse)Author
2017-12-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Clamp timeouts to INT_MAX in conntrack, from Jay Elliot. 2) Fix broken UAPI for BPF_PROG_TYPE_PERF_EVENT, from Hendrik Brueckner. 3) Fix locking in ieee80211_sta_tear_down_BA_sessions, from Johannes Berg. 4) Add missing barriers to ptr_ring, from Michael S. Tsirkin. 5) Don't advertise gigabit in sh_eth when not available, from Thomas Petazzoni. 6) Check network namespace when delivering to netlink taps, from Kevin Cernekee. 7) Kill a race in raw_sendmsg(), from Mohamed Ghannam. 8) Use correct address in TCP md5 lookups when replying to an incoming segment, from Christoph Paasch. 9) Add schedule points to BPF map alloc/free, from Eric Dumazet. 10) Don't allow silly mtu values to be used in ipv4/ipv6 multicast, also from Eric Dumazet. 11) Fix SKB leak in tipc, from Jon Maloy. 12) Disable MAC learning on OVS ports of mlxsw, from Yuval Mintz. 13) SKB leak fix in skB_complete_tx_timestamp(), from Willem de Bruijn. 14) Add some new qmi_wwan device IDs, from Daniele Palmas. 15) Fix static key imbalance in ingress qdisc, from Jiri Pirko. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net: qcom/emac: Reduce timeout for mdio read/write net: sched: fix static key imbalance in case of ingress/clsact_init error net: sched: fix clsact init error path ip_gre: fix wrong return value of erspan_rcv net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support pkt_sched: Remove TC_RED_OFFLOADED from uapi net: sched: Move to new offload indication in RED net: sched: Add TCA_HW_OFFLOAD net: aquantia: Increment driver version net: aquantia: Fix typo in ethtool statistics names net: aquantia: Update hw counters on hw init net: aquantia: Improve link state and statistics check interval callback net: aquantia: Fill in multicast counter in ndev stats from hardware net: aquantia: Fill ndev stat couters from hardware net: aquantia: Extend stat counters to 64bit values net: aquantia: Fix hardware DMA stream overload on large MRRS net: aquantia: Fix actual speed capabilities reporting sock: free skb in skb_complete_tx_timestamp on error s390/qeth: update takeover IPs after configuration change s390/qeth: lock IP table while applying takeover changes ...
2017-12-14Merge tag 'trace-v4.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Various fix-ups: - comment fixes - build fix - better memory alloction (don't use NR_CPUS) - configuration fix - build warning fix - enhanced callback parameter (to simplify users of trace hooks) - give up on stack tracing when RCU isn't watching (it's a lost cause)" * tag 'trace-v4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Have stack trace not record if RCU is not watching tracing: Pass export pointer as argument to ->write() ring-buffer: Remove unused function __rb_data_page_index() tracing: make PREEMPTIRQ_EVENTS depend on TRACING tracing: Allocate mask_str buffer dynamically tracing: always define trace_{irq,preempt}_{enable_disable} tracing: Fix code comments in trace.c
2017-12-14tracing: Have stack trace not record if RCU is not watchingSteven Rostedt (VMware)
The stack tracer records a stack dump whenever it sees a stack usage that is more than what it ever saw before. This can happen at any function that is being traced. If it happens when the CPU is going idle (or other strange locations), RCU may not be watching, and in this case, the recording of the stack trace will trigger a warning. There's been lots of efforts to make hacks to allow stack tracing to proceed even if RCU is not watching, but this only causes more issues to appear. Simply do not trace a stack if RCU is not watching. It probably isn't a bad stack anyway. Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-12-12bpf: fix corruption on concurrent perf_event_output callsDaniel Borkmann
When tracing and networking programs are both attached in the system and both use event-output helpers that eventually call into perf_event_output(), then we could end up in a situation where the tracing attached program runs in user context while a cls_bpf program is triggered on that same CPU out of softirq context. Since both rely on the same per-cpu perf_sample_data, we could potentially corrupt it. This can only ever happen in a combination of the two types; all tracing programs use a bpf_prog_active counter to bail out in case a program is already running on that CPU out of a different context. XDP and cls_bpf programs by themselves don't have this issue as they run in the same context only. Therefore, split both perf_sample_data so they cannot be accessed from each other. Fixes: 20b9d7ac4852 ("bpf: avoid excessive stack usage for perf_sample_data") Reported-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Song Liu <songliubraving@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-12-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Various TCP control block fixes, including one that crashes with SELinux, from David Ahern and Eric Dumazet. 2) Fix ACK generation in rxrpc, from David Howells. 3) ipvlan doesn't set the mark properly in the ipv4 route lookup key, from Gao Feng. 4) SIT configuration doesn't take on the frag_off ipv4 field configuration properly, fix from Hangbin Liu. 5) TSO can fail after device down/up on stmmac, fix from Lars Persson. 6) Various bpftool fixes (mostly in JSON handling) from Quentin Monnet. 7) Various SKB leak fixes in vhost/tun/tap (mostly observed as performance problems). From Wei Xu. 8) mvpps's TX descriptors were not zero initialized, from Yan Markman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) tcp: use IPCB instead of TCP_SKB_CB in inet_exact_dif_match() tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb() rxrpc: Fix the MAINTAINERS record rxrpc: Use correct netns source in rxrpc_release_sock() liquidio: fix incorrect indentation of assignment statement stmmac: reset last TSO segment size after device open ipvlan: Add the skb->mark as flow4's member to lookup route s390/qeth: build max size GSO skbs on L2 devices s390/qeth: fix GSO throughput regression s390/qeth: fix thinko in IPv4 multicast address tracking tap: free skb if flags error tun: free skb in early errors vhost: fix skb leak in handle_rx() bnxt_en: Fix a variable scoping in bnxt_hwrm_do_send_msg() bnxt_en: fix dst/src fid for vxlan encap/decap actions bnxt_en: wildcard smac while creating tunnel decap filter bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown phylink: ensure we take the link down when phylink_stop() is called sfp: warn about modules requiring address change sequence sfp: improve RX_LOS handling ...
2017-12-04tracing: Pass export pointer as argument to ->write()Felipe Balbi
By passing an export descriptor to the write function, users don't need to keep a global static pointer and can rely on container_of() to fetch their own structure. Link: http://lkml.kernel.org/r/20170602102025.5140-1-felipe.balbi@linux.intel.com Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-12-04ring-buffer: Remove unused function __rb_data_page_index()Matthias Kaehlcke
This fixes the following warning when building with clang: kernel/trace/ring_buffer.c:1842:1: error: unused function '__rb_data_page_index' [-Werror,-Wunused-function] Link: http://lkml.kernel.org/r/20170518001415.5223-1-mka@chromium.org Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-12-04tracing: make PREEMPTIRQ_EVENTS depend on TRACINGArnd Bergmann
When CONFIG_TRACING is disabled, the new preemptirq events tracer produces a build failure: In file included from kernel/trace/trace_irqsoff.c:17:0: kernel/trace/trace.h: In function 'trace_test_and_set_recursion': kernel/trace/trace.h:542:28: error: 'struct task_struct' has no member named 'trace_recursion' Adding an explicit dependency avoids the broken configuration. Link: http://lkml.kernel.org/r/20171103104031.270375-1-arnd@arndb.de Fixes: d59158162e03 ("tracing: Add support for preempt and irq enable/disable events") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-12-04tracing: Allocate mask_str buffer dynamicallyChangbin Du
The default NR_CPUS can be very large, but actual possible nr_cpu_ids usually is very small. For my x86 distribution, the NR_CPUS is 8192 and nr_cpu_ids is 4. About 2 pages are wasted. Most machines don't have so many CPUs, so define a array with NR_CPUS just wastes memory. So let's allocate the buffer dynamically when need. With this change, the mutext tracing_cpumask_update_lock also can be removed now, which was used to protect mask_str. Link: http://lkml.kernel.org/r/1512013183-19107-1-git-send-email-changbin.du@intel.com Fixes: 36dfe9252bd4c ("ftrace: make use of tracing_cpumask") Cc: stable@vger.kernel.org Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-12-04tracing: Fix code comments in trace.cChunyu Hu
Naming in code comments for tracing_snapshot, tracing_snapshot_alloc and trace_pid_filter_add_remove_task don't match the real function names. And latency_trace has been removed from tracing directory. Fix them. Link: http://lkml.kernel.org/r/1508394753-20887-1-git-send-email-chuhu@redhat.com Fixes: cab5037 ("tracing/ftrace: Enable snapshot function trigger") Fixes: 886b5b7 ("tracing: remove /debug/tracing/latency_trace") Signed-off-by: Chunyu Hu <chuhu@redhat.com> [ Replaced /sys/kernel/debug/tracing with /sys/kerne/tracing ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-12-01Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A selection of fixes/changes that should make it into this series. This contains: - NVMe, two merges, containing: - pci-e, rdma, and fc fixes - Device quirks - Fix for a badblocks leak in null_blk - bcache fix from Rui Hua for a race condition regression where -EINTR was returned to upper layers that didn't expect it. - Regression fix for blktrace for a bug introduced in this series. - blktrace cleanup for cgroup id. - bdi registration error handling. - Small series with cleanups for blk-wbt. - Various little fixes for typos and the like. Nothing earth shattering, most important are the NVMe and bcache fixes" * 'for-linus' of git://git.kernel.dk/linux-block: (34 commits) nvme-pci: fix NULL pointer dereference in nvme_free_host_mem() nvme-rdma: fix memory leak during queue allocation blktrace: fix trace mutex deadlock nvme-rdma: Use mr pool nvme-rdma: Check remotely invalidated rkey matches our expected rkey nvme-rdma: wait for local invalidation before completing a request nvme-rdma: don't complete requests before a send work request has completed nvme-rdma: don't suppress send completions bcache: check return value of register_shrinker bcache: recover data from backing when data is clean bcache: Fix building error on MIPS bcache: add a comment in journal bucket reading nvme-fc: don't use bit masks for set/test_bit() numbers blk-wbt: fix comments typo blk-wbt: move wbt_clear_stat to common place in wbt_done blk-sysfs: remove NULL pointer checking in queue_wb_lat_store blk-wbt: remove duplicated setting in wbt_init nvme-pci: add quirk for delay before CHK RDY for WDC SN200 block: remove useless assignment in bio_split null_blk: fix dev->badblocks leak ...
2017-12-01bpf: set maximum number of attached progs to 64 for a single perf tpYonghong Song
cgropu+bpf prog array has a maximum number of 64 programs. Let us apply the same limit here. Fixes: e87c6bc3852b ("bpf: permit multiple bpf attachments for a single perf event") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-27blktrace: fix trace mutex deadlockJens Axboe
A previous commit changed the locking around registration/cleanup, but direct callers of blk_trace_remove() were missed. This means that if we hit the error path in setup, we will deadlock on attempting to re-acquire the queue trace mutex. Fixes: 1f2cac107c59 ("blktrace: fix unlocked access to init/start-stop/teardown") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-22bpf: change bpf_perf_event_output arg5 type to ARG_CONST_SIZE_OR_ZEROGianluca Borello
Commit 9fd29c08e520 ("bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics") relaxed the treatment of ARG_CONST_SIZE_OR_ZERO due to the way the compiler generates optimized BPF code when checking boundaries of an argument from C code. A typical example of this optimized code can be generated using the bpf_perf_event_output helper when operating on variable memory: /* len is a generic scalar */ if (len > 0 && len <= 0x7fff) bpf_perf_event_output(ctx, &perf_map, 0, buf, len); 110: (79) r5 = *(u64 *)(r10 -40) 111: (bf) r1 = r5 112: (07) r1 += -1 113: (25) if r1 > 0x7ffe goto pc+6 114: (bf) r1 = r6 115: (18) r2 = 0xffff94e5f166c200 117: (b7) r3 = 0 118: (bf) r4 = r7 119: (85) call bpf_perf_event_output#25 R5 min value is negative, either use unsigned or 'var &= const' With this code, the verifier loses track of the variable. Replacing arg5 with ARG_CONST_SIZE_OR_ZERO is thus desirable since it avoids this quite common case which leads to usability issues, and the compiler generates code that the verifier can more easily test: if (len <= 0x7fff) bpf_perf_event_output(ctx, &perf_map, 0, buf, len); or bpf_perf_event_output(ctx, &perf_map, 0, buf, len & 0x7fff); No changes to the bpf_perf_event_output helper are necessary since it can handle a case where size is 0, and an empty frame is pushed. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-22bpf: change bpf_probe_read_str arg2 type to ARG_CONST_SIZE_OR_ZEROGianluca Borello
Commit 9fd29c08e520 ("bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics") relaxed the treatment of ARG_CONST_SIZE_OR_ZERO due to the way the compiler generates optimized BPF code when checking boundaries of an argument from C code. A typical example of this optimized code can be generated using the bpf_probe_read_str helper when operating on variable memory: /* len is a generic scalar */ if (len > 0 && len <= 0x7fff) bpf_probe_read_str(p, len, s); 251: (79) r1 = *(u64 *)(r10 -88) 252: (07) r1 += -1 253: (25) if r1 > 0x7ffe goto pc-42 254: (bf) r1 = r7 255: (79) r2 = *(u64 *)(r10 -88) 256: (bf) r8 = r4 257: (85) call bpf_probe_read_str#45 R2 min value is negative, either use unsigned or 'var &= const' With this code, the verifier loses track of the variable. Replacing arg2 with ARG_CONST_SIZE_OR_ZERO is thus desirable since it avoids this quite common case which leads to usability issues, and the compiler generates code that the verifier can more easily test: if (len <= 0x7fff) bpf_probe_read_str(p, len, s); or bpf_probe_read_str(p, len & 0x7fff, s); No changes to the bpf_probe_read_str helper are necessary since strncpy_from_unsafe itself immediately returns if the size passed is 0. Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-22bpf: remove explicit handling of 0 for arg2 in bpf_probe_readGianluca Borello
Commit 9c019e2bc4b2 ("bpf: change helper bpf_probe_read arg2 type to ARG_CONST_SIZE_OR_ZERO") changed arg2 type to ARG_CONST_SIZE_OR_ZERO to simplify writing bpf programs by taking advantage of the new semantics introduced for ARG_CONST_SIZE_OR_ZERO which allows <!NULL, 0> arguments. In order to prevent the helper from actually passing a NULL pointer to probe_kernel_read, which can happen when <NULL, 0> is passed to the helper, the commit also introduced an explicit check against size == 0. After the recent introduction of the ARG_PTR_TO_MEM_OR_NULL type, bpf_probe_read can not receive a pair of <NULL, 0> arguments anymore, thus the check is not needed anymore and can be removed, since probe_kernel_read can correctly handle a <!NULL, 0> call. This also fixes the semantics of the helper before it gets officially released and bpf programs start relying on this check. Fixes: 9c019e2bc4b2 ("bpf: change helper bpf_probe_read arg2 type to ARG_CONST_SIZE_OR_ZERO") Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-19blktrace: Use blk_trace_bio_get_cgid inside blk_add_trace_bioMarcos Paulo de Souza
We always pass in blk_trace_bio_get_cgid(q, bio) to blk_add_trace_bio(). Since both are readily available in the function already, kill the argument. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Rewrote commit message. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-17Merge tag 'trace-v4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from - allow module init functions to be traced - clean up some unused or not used by config events (saves space) - clean up of trace histogram code - add support for preempt and interrupt enabled/disable events - other various clean ups * tag 'trace-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (30 commits) tracing, thermal: Hide cpu cooling trace events when not in use tracing, thermal: Hide devfreq trace events when not in use ftrace: Kill FTRACE_OPS_FL_PER_CPU perf/ftrace: Small cleanup perf/ftrace: Fix function trace events perf/ftrace: Revert ("perf/ftrace: Fix double traces of perf on ftrace:function") tracing, dma-buf: Remove unused trace event dma_fence_annotate_wait_on tracing, memcg, vmscan: Hide trace events when not in use tracing/xen: Hide events that are not used when X86_PAE is not defined tracing: mark trace_test_buffer as __maybe_unused printk: Remove superfluous memory barriers from printk_safe ftrace: Clear hashes of stale ips of init memory tracing: Add support for preempt and irq enable/disable events tracing: Prepare to add preempt and irq trace events ftrace/kallsyms: Have /proc/kallsyms show saved mod init functions ftrace: Add freeing algorithm to free ftrace_mod_maps ftrace: Save module init functions kallsyms symbols for tracing ftrace: Allow module init functions to be traced ftrace: Add a ftrace_free_mem() function for modules to use tracing: Reimplement log2 ...
2017-11-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge updates from Andrew Morton: - a few misc bits - ocfs2 updates - almost all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits) memory hotplug: fix comments when adding section mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP mm: simplify nodemask printing mm,oom_reaper: remove pointless kthread_run() error check mm/page_ext.c: check if page_ext is not prepared writeback: remove unused function parameter mm: do not rely on preempt_count in print_vma_addr mm, sparse: do not swamp log with huge vmemmap allocation failures mm/hmm: remove redundant variable align_end mm/list_lru.c: mark expected switch fall-through mm/shmem.c: mark expected switch fall-through mm/page_alloc.c: broken deferred calculation mm: don't warn about allocations which stall for too long fs: fuse: account fuse_inode slab memory as reclaimable mm, page_alloc: fix potential false positive in __zone_watermark_ok mm: mlock: remove lru_add_drain_all() mm, sysctl: make NUMA stats configurable shmem: convert shmem_init_inodecache() to void Unify migrate_pages and move_pages access checks mm, pagevec: rename pagevec drained field ...
2017-11-15kmemcheck: remove annotationsLevin, Alexander (Sasha Levin)
Patch series "kmemcheck: kill kmemcheck", v2. As discussed at LSF/MM, kill kmemcheck. KASan is a replacement that is able to work without the limitation of kmemcheck (single CPU, slow). KASan is already upstream. We are also not aware of any users of kmemcheck (or users who don't consider KASan as a suitable replacement). The only objection was that since KASAN wasn't supported by all GCC versions provided by distros at that time we should hold off for 2 years, and try again. Now that 2 years have passed, and all distros provide gcc that supports KASAN, kill kmemcheck again for the very same reasons. This patch (of 4): Remove kmemcheck annotations, and calls to kmemcheck from the kernel. [alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs] Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.com Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Cc: Alexander Potapenko <glider@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Hansen <devtimhansen@gmail.com> Cc: Vegard Nossum <vegardno@ifi.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-11-15Merge branch 'for-linus' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual rocket-science from trivial tree for 4.15" * 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: MAINTAINERS: relinquish kconfig MAINTAINERS: Update my email address treewide: Fix typos in Kconfig kfifo: Fix comments init/Kconfig: Fix module signing document location misc: ibmasm: Return error on error path HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback" MAINTAINERS: Correct path to uDraw PS3 driver tracing: Fix doc mistakes in trace sample tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig mm/huge_memory.c: fixup grammar in comment lib/xz: Add fall-through comments to a switch statement
2017-11-14Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...
2017-11-14bpf: change helper bpf_probe_read arg2 type to ARG_CONST_SIZE_OR_ZEROYonghong Song
The helper bpf_probe_read arg2 type is changed from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO to permit size-0 buffer. Together with newer ARG_CONST_SIZE_OR_ZERO semantics which allows non-NULL buffer with size 0, this allows simpler bpf programs with verifier acceptance. The previous commit which changes ARG_CONST_SIZE_OR_ZERO semantics has details on examples. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main updates in this cycle were: - Group balancing enhancements and cleanups (Brendan Jackman) - Move CPU isolation related functionality into its separate kernel/sched/isolation.c file, with related 'housekeeping_*()' namespace and nomenclature et al. (Frederic Weisbecker) - Improve the interactive/cpu-intense fairness calculation (Josef Bacik) - Improve the PELT code and related cleanups (Peter Zijlstra) - Improve the logic of pick_next_task_fair() (Uladzislau Rezki) - Improve the RT IPI based balancing logic (Steven Rostedt) - Various micro-optimizations: - better !CONFIG_SCHED_DEBUG optimizations (Patrick Bellasi) - better idle loop (Cheng Jian) - ... plus misc fixes, cleanups and updates" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds sched/sysctl: Fix attributes of some extern declarations sched/isolation: Document isolcpus= boot parameter flags, mark it deprecated sched/isolation: Add basic isolcpus flags sched/isolation: Move isolcpus= handling to the housekeeping code sched/isolation: Handle the nohz_full= parameter sched/isolation: Introduce housekeeping flags sched/isolation: Split out new CONFIG_CPU_ISOLATION=y config from CONFIG_NO_HZ_FULL sched/isolation: Rename is_housekeeping_cpu() to housekeeping_cpu() sched/isolation: Use its own static key sched/isolation: Make the housekeeping cpumask private sched/isolation: Provide a dynamic off-case to housekeeping_any_cpu() sched/isolation, watchdog: Use housekeeping_cpumask() instead of ad-hoc version sched/isolation: Move housekeeping related code to its own file sched/idle: Micro-optimize the idle loop sched/isolcpus: Fix "isolcpus=" boot parameter handling when !CONFIG_CPUMASK_OFFSTACK x86/tsc: Append the 'tsc=' description for the 'tsc=unstable' boot parameter sched/rt: Simplify the IPI based RT balancing logic block/ioprio: Use a helper to check for RT prio sched/rt: Add a helper to test for a RT task ...
2017-11-13Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main changes in this cycle were: Kernel: - kprobes updates: use better W^X patterns for code modifications, improve optprobes, remove jprobes. (Masami Hiramatsu, Kees Cook) - core fixes: event timekeeping (enabled/running times statistics) fixes, perf_event_read() locking fixes and cleanups, etc. (Peter Zijlstra) - Extend x86 Intel free-running PEBS support and support x86 user-register sampling in perf record and perf script. (Andi Kleen) Tooling: - Completely rework the way inline frames are handled. Instead of querying for the inline nodes on-demand in the individual tools, we now create proper callchain nodes for inlined frames. (Milian Wolff) - 'perf trace' updates (Arnaldo Carvalho de Melo) - Implement a way to print formatted output to per-event files in 'perf script' to facilitate generate flamegraphs, elliminating the need to write scripts to do that separation (yuzhoujian, Arnaldo Carvalho de Melo) - Update vendor events JSON metrics for Intel's Broadwell, Broadwell Server, Haswell, Haswell Server, IvyBridge, IvyTown, JakeTown, Sandy Bridge, Skylake, SkyLake Server - and Goldmont Plus V1 (Andi Kleen, Kan Liang) - Multithread the synthesizing of PERF_RECORD_ events for pre-existing threads in 'perf top', speeding up that phase, greatly improving the user experience in systems such as Intel's Knights Mill (Kan Liang) - Introduce the concept of weak groups in 'perf stat': try to set up a group, but if it's not schedulable fallback to not using a group. That gives us the best of both worlds: groups if they work, but still a usable fallback if they don't. E.g: (Andi Kleen) - perf sched timehist enhancements (David Ahern) - ... various other enhancements, updates, cleanups and fixes" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (139 commits) kprobes: Don't spam the build log with deprecation warnings arm/kprobes: Remove jprobe test case arm/kprobes: Fix kretprobe test to check correct counter perf srcline: Show correct function name for srcline of callchains perf srcline: Fix memory leak in addr2inlines() perf trace beauty kcmp: Beautify arguments perf trace beauty: Implement pid_fd beautifier tools include uapi: Grab a copy of linux/kcmp.h perf callchain: Fix double mapping al->addr for children without self period perf stat: Make --per-thread update shadow stats to show metrics perf stat: Move the shadow stats scale computation in perf_stat__update_shadow_stats perf tools: Add perf_data_file__write function perf tools: Add struct perf_data_file perf tools: Rename struct perf_data_file to perf_data perf script: Print information about per-event-dump files perf trace beauty prctl: Generate 'option' string table from kernel headers tools include uapi: Grab a copy of linux/prctl.h perf script: Allow creating per-event dump files perf evsel: Restore evsel->priv as a tool private area perf script: Use event_format__fprintf() ...
2017-11-11bpf: Revert bpf_overrid_function() helper changes.David S. Miller
NACK'd by x86 maintainer. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11bpf: add a bpf_override_function helperJosef Bacik
Error injection is sloppy and very ad-hoc. BPF could fill this niche perfectly with it's kprobe functionality. We could make sure errors are only triggered in specific call chains that we care about with very specific situations. Accomplish this with the bpf_override_funciton helper. This will modify the probe'd callers return value to the specified value and set the PC to an override function that simply returns, bypassing the originally probed function. This gives us a nice clean way to implement systematic error injection for all of our code paths. Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10blktrace: fix unlocked registration of tracepointsJens Axboe
We need to ensure that tracepoints are registered and unregistered with the users of them. The existing atomic count isn't enough for that. Add a lock around the tracepoints, so we serialize access to them. This fixes cases where we have multiple users setting up and tearing down tracepoints, like this: CPU: 0 PID: 2995 Comm: syzkaller857118 Not tainted 4.14.0-rc5-next-20171018+ #36 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1c4/0x1e0 kernel/panic.c:546 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:177 do_trap_no_signal arch/x86/kernel/traps.c:211 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:260 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:297 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:310 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:tracepoint_add_func kernel/tracepoint.c:210 [inline] RIP: 0010:tracepoint_probe_register_prio+0x397/0x9a0 kernel/tracepoint.c:283 RSP: 0018:ffff8801d1d1f6c0 EFLAGS: 00010293 RAX: ffff8801d22e8540 RBX: 00000000ffffffef RCX: ffffffff81710f07 RDX: 0000000000000000 RSI: ffffffff85b679c0 RDI: ffff8801d5f19818 RBP: ffff8801d1d1f7c8 R08: ffffffff81710c10 R09: 0000000000000004 R10: ffff8801d1d1f6b0 R11: 0000000000000003 R12: ffffffff817597f0 R13: 0000000000000000 R14: 00000000ffffffff R15: ffff8801d1d1f7a0 tracepoint_probe_register+0x2a/0x40 kernel/tracepoint.c:304 register_trace_block_rq_insert include/trace/events/block.h:191 [inline] blk_register_tracepoints+0x1e/0x2f0 kernel/trace/blktrace.c:1043 do_blk_trace_setup+0xa10/0xcf0 kernel/trace/blktrace.c:542 blk_trace_setup+0xbd/0x180 kernel/trace/blktrace.c:564 sg_ioctl+0xc71/0x2d90 drivers/scsi/sg.c:1089 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x444339 RSP: 002b:00007ffe05bb5b18 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006d66c0 RCX: 0000000000444339 RDX: 000000002084cf90 RSI: 00000000c0481273 RDI: 0000000000000009 RBP: 0000000000000082 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffffff R13: 00000000c0481273 R14: 0000000000000000 R15: 0000000000000000 since we can now run these in parallel. Ensure that the exported helpers for doing this are grabbing the queue trace mutex. Reported-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10blktrace: fix unlocked access to init/start-stop/teardownJens Axboe
sg.c calls into the blktrace functions without holding the proper queue mutex for doing setup, start/stop, or teardown. Add internal unlocked variants, and export the ones that do the proper locking. Fixes: 6da127ad0918 ("blktrace: Add blktrace ioctls to SCSI generic devices") Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-08Merge branch 'linus' into sched/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07Merge branch 'linus' into perf/core, to fix conflictsIngo Molnar
Conflicts: tools/perf/arch/arm/annotate/instructions.c tools/perf/arch/arm64/annotate/instructions.c tools/perf/arch/powerpc/annotate/instructions.c tools/perf/arch/s390/annotate/instructions.c tools/perf/arch/x86/tests/intel-cqm.c tools/perf/ui/tui/progress.c tools/perf/util/zlib.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01bpf: avoid rcu_dereference inside bpf_event_mutex lock regionYonghong Song
During perf event attaching/detaching bpf programs, the tp_event->prog_array change is protected by the bpf_event_mutex lock in both attaching and deteching functions. Although tp_event->prog_array is a rcu pointer, rcu_derefrence is not needed to access it since mutex lock will guarantee ordering. Verified through "make C=2" that sparse locking check still happy with the new change. Also change the label name in perf_event_{attach,detach}_bpf_prog from "out" to "unlock" to reflect the code action after the label. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27bpf: remove tail_call and get_stackid helper declarations from bpf.hGianluca Borello
commit afdb09c720b6 ("security: bpf: Add LSM hooks for bpf object related syscall") included linux/bpf.h in linux/security.h. As a result, bpf programs including bpf_helpers.h and some other header that ends up pulling in also security.h, such as several examples under samples/bpf, fail to compile because bpf_tail_call and bpf_get_stackid are now "redefined as different kind of symbol". >From bpf.h: u64 bpf_tail_call(u64 ctx, u64 r2, u64 index, u64 r4, u64 r5); u64 bpf_get_stackid(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5); Whereas in bpf_helpers.h they are: static void (*bpf_tail_call)(void *ctx, void *map, int index); static int (*bpf_get_stackid)(void *ctx, void *map, int flags); Fix this by removing the unused declaration of bpf_tail_call and moving the declaration of bpf_get_stackid in bpf_trace.c, which is the only place where it's needed. Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-27perf/bpf: Extend the perf_event_read_local() interface, a.k.a. "bpf: perf ↵Yonghong Song
event change needed for subsequent bpf helpers" eBPF programs would like access to the (perf) event enabled and running times along with the event value, such that they can deal with event multiplexing (among other things). This patch extends the interface; a future eBPF patch will utilize the new functionality. [ Note, there's a same-content commit with a poor changelog and a meaningless title in the networking tree as well - but we need this change for subsequent perf work, so apply it here as well, with a proper changelog. Hopefully Git will be able to sort out this somewhat messy workflow, if there are no other, conflicting changes to these files. ] Signed-off-by: Yonghong Song <yhs@fb.com> [ Rewrote the changelog. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <ast@fb.com> Cc: <daniel@iogearbox.net> Cc: <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David S. Miller <davem@davemloft.net> Link: http://lkml.kernel.org/r/20171005161923.332790-2-yhs@fb.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25bpf: permit multiple bpf attachments for a single perf eventYonghong Song
This patch enables multiple bpf attachments for a kprobe/uprobe/tracepoint single trace event. Each trace_event keeps a list of attached perf events. When an event happens, all attached bpf programs will be executed based on the order of attachment. A global bpf_event_mutex lock is introduced to protect prog_array attaching and detaching. An alternative will be introduce a mutex lock in every trace_event_call structure, but it takes a lot of extra memory. So a global bpf_event_mutex lock is a good compromise. The bpf prog detachment involves allocation of memory. If the allocation fails, a dummy do-nothing program will replace to-be-detached program in-place. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18bpf: split verifier and program opsJakub Kicinski
struct bpf_verifier_ops contains both verifier ops and operations used later during program's lifetime (test_run). Split the runtime ops into a different structure. BPF_PROG_TYPE() will now append ## _prog_ops or ## _verifier_ops to the names. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16ftrace: Kill FTRACE_OPS_FL_PER_CPUPeter Zijlstra
The one and only user of FTRACE_OPS_FL_PER_CPU is gone, remove the lot. Link: http://lkml.kernel.org/r/20171011080224.372422809@infradead.org Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-10-16perf/ftrace: Small cleanupPeter Zijlstra
ops->flags _should_ be 0 at this point, so setting the flag using bitwise or is a bit daft. Link: http://lkml.kernel.org/r/20171011080224.315585202@infradead.org Requested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-10-16perf/ftrace: Fix function trace eventsPeter Zijlstra
The function-trace <-> perf interface is a tad messed up. Where all the other trace <-> perf interfaces use a single trace hook registration and use per-cpu RCU based hlist to iterate the events, function-trace actually needs multiple hook registrations in order to minimize function entry patching when filters are present. The end result is that we iterate events both on the trace hook and on the hlist, which results in reporting events multiple times. Since function-trace cannot use the regular scheme, fix it the other way around, use singleton hlists. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-10-16perf/ftrace: Revert ("perf/ftrace: Fix double traces of perf on ↵Peter Zijlstra
ftrace:function") Revert commit: 75e8387685f6 ("perf/ftrace: Fix double traces of perf on ftrace:function") The reason I instantly stumbled on that patch is that it only addresses the ftrace situation and doesn't mention the other _5_ places that use this interface. It doesn't explain why those don't have the problem and if not, why their solution doesn't work for ftrace. It doesn't, but this is just putting more duct tape on. Link: http://lkml.kernel.org/r/20171011080224.200565770@infradead.org Cc: Zhou Chengming <zhouchengming1@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-10-13tracing: mark trace_test_buffer as __maybe_unusedArnd Bergmann
After trace_selftest_startup_sched_switch is removed, trace_test_buffer() is only used sometimes, leading to this warning: kernel/trace/trace_selftest.c:62:12: error: 'trace_test_buffer' defined but not used [-Werror=unused-function] There is no simple #ifdef condition that captures well whether the function is in fact used or not, so marking it as __maybe_unused is probably the best way to shut up the warning. The function will then be silently dropped when there is no user. Link: http://lkml.kernel.org/r/20171013142227.1273469-1-arnd@arndb.de Fixes: d8c4deee6dc6 ("tracing: Remove obsolete sched_switch tracer selftest") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-10-12tracing: Kconfig text fixes for CONFIG_HWLAT_TRACERJesper Dangaard Brouer
Trivial spelling fixes for Kconfig help text of config HWLAT_TRACER. Fixes: e7c15cd8a113 ("tracing: Added hardware latency tracer") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-10-10ftrace: Clear hashes of stale ips of init memoryJoel Fernandes
Filters should be cleared of init functions during freeing of init memory when the ftrace dyn records are released. However in current code, the filters are left as is. This patch clears the hashes of the saved init functions when the init memory is freed. This fixes the following issue reproducible with the following sequence of commands for a test module: ================================================ void bar(void) { printk(KERN_INFO "bar!\n"); } void foo(void) { printk(KERN_INFO "foo!\n"); bar(); } static int __init hello_init(void) { printk(KERN_INFO "Hello world!\n"); foo(); return 0; } static void __exit hello_cleanup(void) { printk(KERN_INFO "Cleaning up module.\n"); } module_init(hello_init); module_exit(hello_cleanup); ================================================ Commands: echo '*:mod:test' > /d/tracing/set_ftrace_filter echo function > /d/tracing/current_tracer modprobe test rmmod test sleep 1 modprobe test cat /d/tracing/set_ftrace_filter Behavior without patch: Init function is still in the filter Expected behavior: Shouldn't have any of the filters set Link: http://lkml.kernel.org/r/20171009192931.56401-1-joelaf@google.com Signed-off-by: Joel Fernandes <joelaf@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-10-10tracing: Add support for preempt and irq enable/disable eventsJoel Fernandes
Preempt and irq trace events can be used for tracing the start and end of an atomic section which can be used by a trace viewer like systrace to graphically view the start and end of an atomic section and correlate them with latencies and scheduling issues. This also serves as a prelude to using synthetic events or probes to rewrite the preempt and irqsoff tracers, along with numerous benefits of using trace events features for these events. Link: http://lkml.kernel.org/r/20171006005432.14244-3-joelaf@google.com Link: http://lkml.kernel.org/r/20171010225137.17370-1-joelaf@google.com Cc: Peter Zilstra <peterz@infradead.org> Cc: kernel-team@android.com Signed-off-by: Joel Fernandes <joelaf@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-10-10sched/debug: Rename task-state printing helpersPeter Zijlstra
Steve requested better names for the new task-state helper functions. So introduce the concept of task-state index for the printing and rename __get_task_state() to task_state_index() and __task_state_to_char() to task_index_to_char(). Requested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170929115016.pzlqc7ss3ccystyg@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>