summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2023-12-29ring-buffer: Fix wake ups when buffer_percent is set to 100Steven Rostedt (Google)
The tracefs file "buffer_percent" is to allow user space to set a water-mark on how much of the tracing ring buffer needs to be filled in order to wake up a blocked reader. 0 - is to wait until any data is in the buffer 1 - is to wait for 1% of the sub buffers to be filled 50 - would be half of the sub buffers are filled with data 100 - is not to wake the waiter until the ring buffer is completely full Unfortunately the test for being full was: dirty = ring_buffer_nr_dirty_pages(buffer, cpu); return (dirty * 100) > (full * nr_pages); Where "full" is the value for "buffer_percent". There is two issues with the above when full == 100. 1. dirty * 100 > 100 * nr_pages will never be true That is, the above is basically saying that if the user sets buffer_percent to 100, more pages need to be dirty than exist in the ring buffer! 2. The page that the writer is on is never considered dirty, as dirty pages are only those that are full. When the writer goes to a new sub-buffer, it clears the contents of that sub-buffer. That is, even if the check was ">=" it would still not be equal as the most pages that can be considered "dirty" is nr_pages - 1. To fix this, add one to dirty and use ">=" in the compare. Link: https://lore.kernel.org/linux-trace-kernel/20231226125902.4a057f1d@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Fixes: 03329f9939781 ("tracing: Add tracefs file buffer_percentage") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-21tracing / synthetic: Disable events after testing in synth_event_gen_test_init()Steven Rostedt (Google)
The synth_event_gen_test module can be built in, if someone wants to run the tests at boot up and not have to load them. The synth_event_gen_test_init() function creates and enables the synthetic events and runs its tests. The synth_event_gen_test_exit() disables the events it created and destroys the events. If the module is builtin, the events are never disabled. The issue is, the events should be disable after the tests are run. This could be an issue if the rest of the boot up tests are enabled, as they expect the events to be in a known state before testing. That known state happens to be disabled. When CONFIG_SYNTH_EVENT_GEN_TEST=y and CONFIG_EVENT_TRACE_STARTUP_TEST=y a warning will trigger: Running tests on trace events: Testing event create_synth_test: Enabled event during self test! ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1 at kernel/trace/trace_events.c:4150 event_trace_self_tests+0x1c2/0x480 Modules linked in: CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-test-00031-gb803d7c664d5-dirty #276 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:event_trace_self_tests+0x1c2/0x480 Code: bb e8 a2 ab 5d fc 48 8d 7b 48 e8 f9 3d 99 fc 48 8b 73 48 40 f6 c6 01 0f 84 d6 fe ff ff 48 c7 c7 20 b6 ad bb e8 7f ab 5d fc 90 <0f> 0b 90 48 89 df e8 d3 3d 99 fc 48 8b 1b 4c 39 f3 0f 85 2c ff ff RSP: 0000:ffffc9000001fdc0 EFLAGS: 00010246 RAX: 0000000000000029 RBX: ffff88810399ca80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffffb9f19478 RDI: ffff88823c734e64 RBP: ffff88810399f300 R08: 0000000000000000 R09: fffffbfff79eb32a R10: ffffffffbcf59957 R11: 0000000000000001 R12: ffff888104068090 R13: ffffffffbc89f0a0 R14: ffffffffbc8a0f08 R15: 0000000000000078 FS: 0000000000000000(0000) GS:ffff88823c700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001f6282001 CR4: 0000000000170ef0 Call Trace: <TASK> ? __warn+0xa5/0x200 ? event_trace_self_tests+0x1c2/0x480 ? report_bug+0x1f6/0x220 ? handle_bug+0x6f/0x90 ? exc_invalid_op+0x17/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? tracer_preempt_on+0x78/0x1c0 ? event_trace_self_tests+0x1c2/0x480 ? __pfx_event_trace_self_tests_init+0x10/0x10 event_trace_self_tests_init+0x27/0xe0 do_one_initcall+0xd6/0x3c0 ? __pfx_do_one_initcall+0x10/0x10 ? kasan_set_track+0x25/0x30 ? rcu_is_watching+0x38/0x60 kernel_init_freeable+0x324/0x450 ? __pfx_kernel_init+0x10/0x10 kernel_init+0x1f/0x1e0 ? _raw_spin_unlock_irq+0x33/0x50 ret_from_fork+0x34/0x60 ? __pfx_kernel_init+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> This is because the synth_event_gen_test_init() left the synthetic events that it created enabled. By having it disable them after testing, the other selftests will run fine. Link: https://lore.kernel.org/linux-trace-kernel/20231220111525.2f0f49b0@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Tom Zanussi <zanussi@kernel.org> Fixes: 9fe41efaca084 ("tracing: Add synth event generation test module") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reported-by: Alexander Graf <graf@amazon.com> Tested-by: Alexander Graf <graf@amazon.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-20tracing/synthetic: fix kernel-doc warningsRandy Dunlap
scripts/kernel-doc warns about using @args: for variadic arguments to functions. Documentation/doc-guide/kernel-doc.rst says that this should be written as @...: instead, so update the source code to match that, preventing the warnings. trace_events_synth.c:1165: warning: Excess function parameter 'args' description in '__synth_event_gen_cmd_start' trace_events_synth.c:1714: warning: Excess function parameter 'args' description in 'synth_event_trace' Link: https://lore.kernel.org/linux-trace-kernel/20231220061226.30962-1-rdunlap@infradead.org Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: 35ca5207c2d11 ("tracing: Add synthetic event command generation functions") Fixes: 8dcc53ad956d2 ("tracing: Add synth_event_trace() and related functions") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-18ring-buffer: Fix slowpath of interrupted eventSteven Rostedt (Google)
To synchronize the timestamps with the ring buffer reservation, there are two timestamps that are saved in the buffer meta data. 1. before_stamp 2. write_stamp When the two are equal, the write_stamp is considered valid, as in, it may be used to calculate the delta of the next event as the write_stamp is the timestamp of the previous reserved event on the buffer. This is done by the following: /*A*/ w = current position on the ring buffer before = before_stamp after = write_stamp ts = read current timestamp if (before != after) { write_stamp is not valid, force adding an absolute timestamp. } /*B*/ before_stamp = ts /*C*/ write = local_add_return(event length, position on ring buffer) if (w == write - event length) { /* Nothing interrupted between A and C */ /*E*/ write_stamp = ts; delta = ts - after /* * If nothing interrupted again, * before_stamp == write_stamp and write_stamp * can be used to calculate the delta for * events that come in after this one. */ } else { /* * The slow path! * Was interrupted between A and C. */ This is the place that there's a bug. We currently have: after = write_stamp ts = read current timestamp /*F*/ if (write == current position on the ring buffer && after < ts && cmpxchg(write_stamp, after, ts)) { delta = ts - after; } else { delta = 0; } The assumption is that if the current position on the ring buffer hasn't moved between C and F, then it also was not interrupted, and that the last event written has a timestamp that matches the write_stamp. That is the write_stamp is valid. But this may not be the case: If a task context event was interrupted by softirq between B and C. And the softirq wrote an event that got interrupted by a hard irq between C and E. and the hard irq wrote an event (does not need to be interrupted) We have: /*B*/ before_stamp = ts of normal context ---> interrupted by softirq /*B*/ before_stamp = ts of softirq context ---> interrupted by hardirq /*B*/ before_stamp = ts of hard irq context /*E*/ write_stamp = ts of hard irq context /* matches and write_stamp valid */ <---- /*E*/ write_stamp = ts of softirq context /* No longer matches before_stamp, write_stamp is not valid! */ <--- w != write - length, go to slow path // Right now the order of events in the ring buffer is: // // |-- softirq event --|-- hard irq event --|-- normal context event --| // after = write_stamp (this is the ts of softirq) ts = read current timestamp if (write == current position on the ring buffer [true] && after < ts [true] && cmpxchg(write_stamp, after, ts) [true]) { delta = ts - after [Wrong!] The delta is to be between the hard irq event and the normal context event, but the above logic made the delta between the softirq event and the normal context event, where the hard irq event is between the two. This will shift all the remaining event timestamps on the sub-buffer incorrectly. The write_stamp is only valid if it matches the before_stamp. The cmpxchg does nothing to help this. Instead, the following logic can be done to fix this: before = before_stamp ts = read current timestamp before_stamp = ts after = write_stamp if (write == current position on the ring buffer && after == before && after < ts) { delta = ts - after } else { delta = 0; } The above will only use the write_stamp if it still matches before_stamp and was tested to not have changed since C. As a bonus, with this logic we do not need any 64-bit cmpxchg() at all! This means the 32-bit rb_time_t workaround can finally be removed. But that's for a later time. Link: https://lore.kernel.org/linux-trace-kernel/20231218175229.58ec3daf@gandalf.local.home/ Link: https://lore.kernel.org/linux-trace-kernel/20231218230712.3a76b081@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Fixes: dd93942570789 ("ring-buffer: Do not try to put back write_stamp") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-15ring-buffer: Do not record in NMI if the arch does not support cmpxchg in NMISteven Rostedt (Google)
As the ring buffer recording requires cmpxchg() to work, if the architecture does not support cmpxchg in NMI, then do not do any recording within an NMI. Link: https://lore.kernel.org/linux-trace-kernel/20231213175403.6fc18540@gandalf.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-15ring-buffer: Have rb_time_cmpxchg() set the msb counter tooSteven Rostedt (Google)
The rb_time_cmpxchg() on 32-bit architectures requires setting three 32-bit words to represent the 64-bit timestamp, with some salt for synchronization. Those are: msb, top, and bottom The issue is, the rb_time_cmpxchg() did not properly salt the msb portion, and the msb that was written was stale. Link: https://lore.kernel.org/linux-trace-kernel/20231215084114.20899342@rorschach.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: f03f2abce4f39 ("ring-buffer: Have 32 bit time stamps use all 64 bits") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-15ring-buffer: Fix 32-bit rb_time_read() race with rb_time_cmpxchg()Mathieu Desnoyers
The following race can cause rb_time_read() to observe a corrupted time stamp: rb_time_cmpxchg() [...] if (!rb_time_read_cmpxchg(&t->msb, msb, msb2)) return false; if (!rb_time_read_cmpxchg(&t->top, top, top2)) return false; <interrupted before updating bottom> __rb_time_read() [...] do { c = local_read(&t->cnt); top = local_read(&t->top); bottom = local_read(&t->bottom); msb = local_read(&t->msb); } while (c != local_read(&t->cnt)); *cnt = rb_time_cnt(top); /* If top and msb counts don't match, this interrupted a write */ if (*cnt != rb_time_cnt(msb)) return false; ^ this check fails to catch that "bottom" is still not updated. So the old "bottom" value is returned, which is wrong. Fix this by checking that all three of msb, top, and bottom 2-bit cnt values match. The reason to favor checking all three fields over requiring a specific update order for both rb_time_set() and rb_time_cmpxchg() is because checking all three fields is more robust to handle partial failures of rb_time_cmpxchg() when interrupted by nested rb_time_set(). Link: https://lore.kernel.org/lkml/20231211201324.652870-1-mathieu.desnoyers@efficios.com/ Link: https://lore.kernel.org/linux-trace-kernel/20231212193049.680122-1-mathieu.desnoyers@efficios.com Fixes: f458a1453424e ("ring-buffer: Test last update in 32bit version of __rb_time_read()") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-15ring-buffer: Fix a race in rb_time_cmpxchg() for 32 bit archsSteven Rostedt (Google)
Mathieu Desnoyers pointed out an issue in the rb_time_cmpxchg() for 32 bit architectures. That is: static bool rb_time_cmpxchg(rb_time_t *t, u64 expect, u64 set) { unsigned long cnt, top, bottom, msb; unsigned long cnt2, top2, bottom2, msb2; u64 val; /* The cmpxchg always fails if it interrupted an update */ if (!__rb_time_read(t, &val, &cnt2)) return false; if (val != expect) return false; <<<< interrupted here! cnt = local_read(&t->cnt); The problem is that the synchronization counter in the rb_time_t is read *after* the value of the timestamp is read. That means if an interrupt were to come in between the value being read and the counter being read, it can change the value and the counter and the interrupted process would be clueless about it! The counter needs to be read first and then the value. That way it is easy to tell if the value is stale or not. If the counter hasn't been updated, then the value is still good. Link: https://lore.kernel.org/linux-trace-kernel/20231211201324.652870-1-mathieu.desnoyers@efficios.com/ Link: https://lore.kernel.org/linux-trace-kernel/20231212115301.7a9c9a64@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Fixes: 10464b4aa605e ("ring-buffer: Add rb_time_t 64 bit operations for speeding up 32 bit") Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-15ring-buffer: Remove useless update to write_stamp in rb_try_to_discard()Steven Rostedt (Google)
When filtering is enabled, a temporary buffer is created to place the content of the trace event output so that the filter logic can decide from the trace event output if the trace event should be filtered out or not. If it is to be filtered out, the content in the temporary buffer is simply discarded, otherwise it is written into the trace buffer. But if an interrupt were to come in while a previous event was using that temporary buffer, the event written by the interrupt would actually go into the ring buffer itself to prevent corrupting the data on the temporary buffer. If the event is to be filtered out, the event in the ring buffer is discarded, or if it fails to discard because another event were to have already come in, it is turned into padding. The update to the write_stamp in the rb_try_to_discard() happens after a fix was made to force the next event after the discard to use an absolute timestamp by setting the before_stamp to zero so it does not match the write_stamp (which causes an event to use the absolute timestamp). But there's an effort in rb_try_to_discard() to put back the write_stamp to what it was before the event was added. But this is useless and wasteful because nothing is going to be using that write_stamp for calculations as it still will not match the before_stamp. Remove this useless update, and in doing so, we remove another cmpxchg64()! Also update the comments to reflect this change as well as remove some extra white space in another comment. Link: https://lore.kernel.org/linux-trace-kernel/20231215081810.1f4f38fe@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Vincent Donnefort <vdonnefort@google.com> Fixes: b2dd797543cf ("ring-buffer: Force absolute timestamp on discard of event") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-15ring-buffer: Do not try to put back write_stampSteven Rostedt (Google)
If an update to an event is interrupted by another event between the time the initial event allocated its buffer and where it wrote to the write_stamp, the code try to reset the write stamp back to the what it had just overwritten. It knows that it was overwritten via checking the before_stamp, and if it didn't match what it wrote to the before_stamp before it allocated its space, it knows it was overwritten. To put back the write_stamp, it uses the before_stamp it read. The problem here is that by writing the before_stamp to the write_stamp it makes the two equal again, which means that the write_stamp can be considered valid as the last timestamp written to the ring buffer. But this is not necessarily true. The event that interrupted the event could have been interrupted in a way that it was interrupted as well, and can end up leaving with an invalid write_stamp. But if this happens and returns to this context that uses the before_stamp to update the write_stamp again, it can possibly incorrectly make it valid, causing later events to have in correct time stamps. As it is OK to leave this function with an invalid write_stamp (one that doesn't match the before_stamp), there's no reason to try to make it valid again in this case. If this race happens, then just leave with the invalid write_stamp and the next event to come along will just add a absolute timestamp and validate everything again. Bonus points: This gets rid of another cmpxchg64! Link: https://lore.kernel.org/linux-trace-kernel/20231214222921.193037a7@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Vincent Donnefort <vdonnefort@google.com> Fixes: a389d86f7fd09 ("ring-buffer: Have nested events still record running time stamp") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-13tracing: Fix uaf issue when open the hist or hist_debug fileZheng Yejian
KASAN report following issue. The root cause is when opening 'hist' file of an instance and accessing 'trace_event_file' in hist_show(), but 'trace_event_file' has been freed due to the instance being removed. 'hist_debug' file has the same problem. To fix it, call tracing_{open,release}_file_tr() in file_operations callback to have the ref count and avoid 'trace_event_file' being freed. BUG: KASAN: slab-use-after-free in hist_show+0x11e0/0x1278 Read of size 8 at addr ffff242541e336b8 by task head/190 CPU: 4 PID: 190 Comm: head Not tainted 6.7.0-rc5-g26aff849438c #133 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x98/0xf8 show_stack+0x1c/0x30 dump_stack_lvl+0x44/0x58 print_report+0xf0/0x5a0 kasan_report+0x80/0xc0 __asan_report_load8_noabort+0x1c/0x28 hist_show+0x11e0/0x1278 seq_read_iter+0x344/0xd78 seq_read+0x128/0x1c0 vfs_read+0x198/0x6c8 ksys_read+0xf4/0x1e0 __arm64_sys_read+0x70/0xa8 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xb0/0x280 do_el0_svc+0x44/0x60 el0_svc+0x34/0x68 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x168/0x170 Allocated by task 188: kasan_save_stack+0x28/0x50 kasan_set_track+0x28/0x38 kasan_save_alloc_info+0x20/0x30 __kasan_slab_alloc+0x6c/0x80 kmem_cache_alloc+0x15c/0x4a8 trace_create_new_event+0x84/0x348 __trace_add_new_event+0x18/0x88 event_trace_add_tracer+0xc4/0x1a0 trace_array_create_dir+0x6c/0x100 trace_array_create+0x2e8/0x568 instance_mkdir+0x48/0x80 tracefs_syscall_mkdir+0x90/0xe8 vfs_mkdir+0x3c4/0x610 do_mkdirat+0x144/0x200 __arm64_sys_mkdirat+0x8c/0xc0 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xb0/0x280 do_el0_svc+0x44/0x60 el0_svc+0x34/0x68 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x168/0x170 Freed by task 191: kasan_save_stack+0x28/0x50 kasan_set_track+0x28/0x38 kasan_save_free_info+0x34/0x58 __kasan_slab_free+0xe4/0x158 kmem_cache_free+0x19c/0x508 event_file_put+0xa0/0x120 remove_event_file_dir+0x180/0x320 event_trace_del_tracer+0xb0/0x180 __remove_instance+0x224/0x508 instance_rmdir+0x44/0x78 tracefs_syscall_rmdir+0xbc/0x140 vfs_rmdir+0x1cc/0x4c8 do_rmdir+0x220/0x2b8 __arm64_sys_unlinkat+0xc0/0x100 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xb0/0x280 do_el0_svc+0x44/0x60 el0_svc+0x34/0x68 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x168/0x170 Link: https://lore.kernel.org/linux-trace-kernel/20231214012153.676155-1-zhengyejian1@huawei.com Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-12tracing: Add size check when printing trace_marker outputSteven Rostedt (Google)
If for some reason the trace_marker write does not have a nul byte for the string, it will overflow the print: trace_seq_printf(s, ": %s", field->buf); The field->buf could be missing the nul byte. To prevent overflow, add the max size that the buf can be by using the event size and the field location. int max = iter->ent_size - offsetof(struct print_entry, buf); trace_seq_printf(s, ": %*.s", max, field->buf); Link: https://lore.kernel.org/linux-trace-kernel/20231212084444.4619b8ce@gandalf.local.home Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-12ring-buffer: Have saved event hold the entire eventSteven Rostedt (Google)
For the ring buffer iterator (non-consuming read), the event needs to be copied into the iterator buffer to make sure that a writer does not overwrite it while the user is reading it. If a write happens during the copy, the buffer is simply discarded. But the temp buffer itself was not big enough. The allocation of the buffer was only BUF_MAX_DATA_SIZE, which is the maximum data size that can be passed into the ring buffer and saved. But the temp buffer needs to hold the meta data as well. That would be BUF_PAGE_SIZE and not BUF_MAX_DATA_SIZE. Link: https://lore.kernel.org/linux-trace-kernel/20231212072558.61f76493@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: 785888c544e04 ("ring-buffer: Have rb_iter_head_event() handle concurrent writer") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-12ring-buffer: Do not update before stamp when switching sub-buffersSteven Rostedt (Google)
The ring buffer timestamps are synchronized by two timestamp placeholders. One is the "before_stamp" and the other is the "write_stamp" (sometimes referred to as the "after stamp" but only in the comments. These two stamps are key to knowing how to handle nested events coming in with a lockless system. When moving across sub-buffers, the before stamp is updated but the write stamp is not. There's an effort to put back the before stamp to something that seems logical in case there's nested events. But as the current event is about to cross sub-buffers, and so will any new nested event that happens, updating the before stamp is useless, and could even introduce new race conditions. The first event on a sub-buffer simply uses the sub-buffer's timestamp and keeps a "delta" of zero. The "before_stamp" and "write_stamp" are not used in the algorithm in this case. There's no reason to try to fix the before_stamp when this happens. As a bonus, it removes a cmpxchg() when crossing sub-buffers! Link: https://lore.kernel.org/linux-trace-kernel/20231211114420.36dde01b@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: a389d86f7fd09 ("ring-buffer: Have nested events still record running time stamp") Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-12tracing: Update snapshot buffer on resize if it is allocatedSteven Rostedt (Google)
The snapshot buffer is to mimic the main buffer so that when a snapshot is needed, the snapshot and main buffer are swapped. When the snapshot buffer is allocated, it is set to the minimal size that the ring buffer may be at and still functional. When it is allocated it becomes the same size as the main ring buffer, and when the main ring buffer changes in size, it should do. Currently, the resize only updates the snapshot buffer if it's used by the current tracer (ie. the preemptirqsoff tracer). But it needs to be updated anytime it is allocated. When changing the size of the main buffer, instead of looking to see if the current tracer is utilizing the snapshot buffer, just check if it is allocated to know if it should be updated or not. Also fix typo in comment just above the code change. Link: https://lore.kernel.org/linux-trace-kernel/20231210225447.48476a6a@rorschach.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: ad909e21bbe69 ("tracing: Add internal tracing_snapshot() functions") Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-12ring-buffer: Fix memory leak of free pageSteven Rostedt (Google)
Reading the ring buffer does a swap of a sub-buffer within the ring buffer with a empty sub-buffer. This allows the reader to have full access to the content of the sub-buffer that was swapped out without having to worry about contention with the writer. The readers call ring_buffer_alloc_read_page() to allocate a page that will be used to swap with the ring buffer. When the code is finished with the reader page, it calls ring_buffer_free_read_page(). Instead of freeing the page, it stores it as a spare. Then next call to ring_buffer_alloc_read_page() will return this spare instead of calling into the memory management system to allocate a new page. Unfortunately, on freeing of the ring buffer, this spare page is not freed, and causes a memory leak. Link: https://lore.kernel.org/linux-trace-kernel/20231210221250.7b9cc83c@rorschach.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: 73a757e63114d ("ring-buffer: Return reader page back into existing ring buffer") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-12tracing: Have large events show up as '[LINE TOO BIG]' instead of nothingSteven Rostedt (Google)
If a large event was added to the ring buffer that is larger than what the trace_seq can handle, it just drops the output: ~# cat /sys/kernel/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 2/2 #P:8 # # _-----=> irqs-off/BH-disabled # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / _-=> migrate-disable # |||| / delay # TASK-PID CPU# ||||| TIMESTAMP FUNCTION # | | | ||||| | | <...>-859 [001] ..... 141.118951: tracing_mark_write <...>-859 [001] ..... 141.148201: tracing_mark_write: 78901234 Instead, catch this case and add some context: ~# cat /sys/kernel/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 2/2 #P:8 # # _-----=> irqs-off/BH-disabled # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / _-=> migrate-disable # |||| / delay # TASK-PID CPU# ||||| TIMESTAMP FUNCTION # | | | ||||| | | <...>-852 [001] ..... 121.550551: tracing_mark_write[LINE TOO BIG] <...>-852 [001] ..... 121.550581: tracing_mark_write: 78901234 This now emulates the same output as trace_pipe. Link: https://lore.kernel.org/linux-trace-kernel/20231209171058.78c1a026@gandalf.local.home Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-12ring-buffer: Fix writing to the buffer with max_data_sizeSteven Rostedt (Google)
The maximum ring buffer data size is the maximum size of data that can be recorded on the ring buffer. Events must be smaller than the sub buffer data size minus any meta data. This size is checked before trying to allocate from the ring buffer because the allocation assumes that the size will fit on the sub buffer. The maximum size was calculated as the size of a sub buffer page (which is currently PAGE_SIZE minus the sub buffer header) minus the size of the meta data of an individual event. But it missed the possible adding of a time stamp for events that are added long enough apart that the event meta data can't hold the time delta. When an event is added that is greater than the current BUF_MAX_DATA_SIZE minus the size of a time stamp, but still less than or equal to BUF_MAX_DATA_SIZE, the ring buffer would go into an infinite loop, looking for a page that can hold the event. Luckily, there's a check for this loop and after 1000 iterations and a warning is emitted and the ring buffer is disabled. But this should never happen. This can happen when a large event is added first, or after a long period where an absolute timestamp is prefixed to the event, increasing its size by 8 bytes. This passes the check and then goes into the algorithm that causes the infinite loop. For events that are the first event on the sub-buffer, it does not need to add a timestamp, because the sub-buffer itself contains an absolute timestamp, and adding one is redundant. The fix is to check if the event is to be the first event on the sub-buffer, and if it is, then do not add a timestamp. This also fixes 32 bit adding a timestamp when a read of before_stamp or write_stamp is interrupted. There's still no need to add that timestamp if the event is going to be the first event on the sub buffer. Also, if the buffer has "time_stamp_abs" set, then also check if the length plus the timestamp is greater than the BUF_MAX_DATA_SIZE. Link: https://lore.kernel.org/all/20231212104549.58863438@gandalf.local.home/ Link: https://lore.kernel.org/linux-trace-kernel/20231212071837.5fdd6c13@gandalf.local.home Link: https://lore.kernel.org/linux-trace-kernel/20231212111617.39e02849@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: a4543a2fa9ef3 ("ring-buffer: Get timestamp after event is allocated") Fixes: 58fbc3c63275c ("ring-buffer: Consolidate add_timestamp to remove some branches") Reported-by: Kent Overstreet <kent.overstreet@linux.dev> # (on IRC) Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-06ring-buffer: Test last update in 32bit version of __rb_time_read()Steven Rostedt (Google)
Since 64 bit cmpxchg() is very expensive on 32bit architectures, the timestamp used by the ring buffer does some interesting tricks to be able to still have an atomic 64 bit number. It originally just used 60 bits and broke it up into two 32 bit words where the extra 2 bits were used for synchronization. But this was not enough for all use cases, and all 64 bits were required. The 32bit version of the ring buffer timestamp was then broken up into 3 32bit words using the same counter trick. But one update was not done. The check to see if the read operation was done without interruption only checked the first two words and not last one (like it had before this update). Fix it by making sure all three updates happen without interruption by comparing the initial counter with the last updated counter. Link: https://lore.kernel.org/linux-trace-kernel/20231206100050.3100b7bb@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: f03f2abce4f39 ("ring-buffer: Have 32 bit time stamps use all 64 bits") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-06ring-buffer: Force absolute timestamp on discard of eventSteven Rostedt (Google)
There's a race where if an event is discarded from the ring buffer and an interrupt were to happen at that time and insert an event, the time stamp is still used from the discarded event as an offset. This can screw up the timings. If the event is going to be discarded, set the "before_stamp" to zero. When a new event comes in, it compares the "before_stamp" with the "write_stamp" and if they are not equal, it will insert an absolute timestamp. This will prevent the timings from getting out of sync due to the discarded event. Link: https://lore.kernel.org/linux-trace-kernel/20231206100244.5130f9b3@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: 6f6be606e763f ("ring-buffer: Force before_stamp and write_stamp to be different on discard") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-05tracing: Fix a possible race when disabling buffered eventsPetr Pavlu
Function trace_buffered_event_disable() is responsible for freeing pages backing buffered events and this process can run concurrently with trace_event_buffer_lock_reserve(). The following race is currently possible: * Function trace_buffered_event_disable() is called on CPU 0. It increments trace_buffered_event_cnt on each CPU and waits via synchronize_rcu() for each user of trace_buffered_event to complete. * After synchronize_rcu() is finished, function trace_buffered_event_disable() has the exclusive access to trace_buffered_event. All counters trace_buffered_event_cnt are at 1 and all pointers trace_buffered_event are still valid. * At this point, on a different CPU 1, the execution reaches trace_event_buffer_lock_reserve(). The function calls preempt_disable_notrace() and only now enters an RCU read-side critical section. The function proceeds and reads a still valid pointer from trace_buffered_event[CPU1] into the local variable "entry". However, it doesn't yet read trace_buffered_event_cnt[CPU1] which happens later. * Function trace_buffered_event_disable() continues. It frees trace_buffered_event[CPU1] and decrements trace_buffered_event_cnt[CPU1] back to 0. * Function trace_event_buffer_lock_reserve() continues. It reads and increments trace_buffered_event_cnt[CPU1] from 0 to 1. This makes it believe that it can use the "entry" that it already obtained but the pointer is now invalid and any access results in a use-after-free. Fix the problem by making a second synchronize_rcu() call after all trace_buffered_event values are set to NULL. This waits on all potential users in trace_event_buffer_lock_reserve() that still read a previous pointer from trace_buffered_event. Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/ Link: https://lkml.kernel.org/r/20231205161736.19663-4-petr.pavlu@suse.com Cc: stable@vger.kernel.org Fixes: 0fc1b09ff1ff ("tracing: Use temp buffer when filtering events") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-05tracing: Fix a warning when allocating buffered events failsPetr Pavlu
Function trace_buffered_event_disable() produces an unexpected warning when the previous call to trace_buffered_event_enable() fails to allocate pages for buffered events. The situation can occur as follows: * The counter trace_buffered_event_ref is at 0. * The soft mode gets enabled for some event and trace_buffered_event_enable() is called. The function increments trace_buffered_event_ref to 1 and starts allocating event pages. * The allocation fails for some page and trace_buffered_event_disable() is called for cleanup. * Function trace_buffered_event_disable() decrements trace_buffered_event_ref back to 0, recognizes that it was the last use of buffered events and frees all allocated pages. * The control goes back to trace_buffered_event_enable() which returns. The caller of trace_buffered_event_enable() has no information that the function actually failed. * Some time later, the soft mode is disabled for the same event. Function trace_buffered_event_disable() is called. It warns on "WARN_ON_ONCE(!trace_buffered_event_ref)" and returns. Buffered events are just an optimization and can handle failures. Make trace_buffered_event_enable() exit on the first failure and left any cleanup later to when trace_buffered_event_disable() is called. Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/ Link: https://lkml.kernel.org/r/20231205161736.19663-3-petr.pavlu@suse.com Fixes: 0fc1b09ff1ff ("tracing: Use temp buffer when filtering events") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-05tracing: Fix incomplete locking when disabling buffered eventsPetr Pavlu
The following warning appears when using buffered events: [ 203.556451] WARNING: CPU: 53 PID: 10220 at kernel/trace/ring_buffer.c:3912 ring_buffer_discard_commit+0x2eb/0x420 [...] [ 203.670690] CPU: 53 PID: 10220 Comm: stress-ng-sysin Tainted: G E 6.7.0-rc2-default #4 56e6d0fcf5581e6e51eaaecbdaec2a2338c80f3a [ 203.670704] Hardware name: Intel Corp. GROVEPORT/GROVEPORT, BIOS GVPRCRB1.86B.0016.D04.1705030402 05/03/2017 [ 203.670709] RIP: 0010:ring_buffer_discard_commit+0x2eb/0x420 [ 203.735721] Code: 4c 8b 4a 50 48 8b 42 48 49 39 c1 0f 84 b3 00 00 00 49 83 e8 01 75 b1 48 8b 42 10 f0 ff 40 08 0f 0b e9 fc fe ff ff f0 ff 47 08 <0f> 0b e9 77 fd ff ff 48 8b 42 10 f0 ff 40 08 0f 0b e9 f5 fe ff ff [ 203.735734] RSP: 0018:ffffb4ae4f7b7d80 EFLAGS: 00010202 [ 203.735745] RAX: 0000000000000000 RBX: ffffb4ae4f7b7de0 RCX: ffff8ac10662c000 [ 203.735754] RDX: ffff8ac0c750be00 RSI: ffff8ac10662c000 RDI: ffff8ac0c004d400 [ 203.781832] RBP: ffff8ac0c039cea0 R08: 0000000000000000 R09: 0000000000000000 [ 203.781839] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 203.781842] R13: ffff8ac10662c000 R14: ffff8ac0c004d400 R15: ffff8ac10662c008 [ 203.781846] FS: 00007f4cd8a67740(0000) GS:ffff8ad798880000(0000) knlGS:0000000000000000 [ 203.781851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 203.781855] CR2: 0000559766a74028 CR3: 00000001804c4000 CR4: 00000000001506f0 [ 203.781862] Call Trace: [ 203.781870] <TASK> [ 203.851949] trace_event_buffer_commit+0x1ea/0x250 [ 203.851967] trace_event_raw_event_sys_enter+0x83/0xe0 [ 203.851983] syscall_trace_enter.isra.0+0x182/0x1a0 [ 203.851990] do_syscall_64+0x3a/0xe0 [ 203.852075] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 203.852090] RIP: 0033:0x7f4cd870fa77 [ 203.982920] Code: 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 b8 89 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e9 43 0e 00 f7 d8 64 89 01 48 [ 203.982932] RSP: 002b:00007fff99717dd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000089 [ 203.982942] RAX: ffffffffffffffda RBX: 0000558ea1d7b6f0 RCX: 00007f4cd870fa77 [ 203.982948] RDX: 0000000000000000 RSI: 00007fff99717de0 RDI: 0000558ea1d7b6f0 [ 203.982957] RBP: 00007fff99717de0 R08: 00007fff997180e0 R09: 00007fff997180e0 [ 203.982962] R10: 00007fff997180e0 R11: 0000000000000246 R12: 00007fff99717f40 [ 204.049239] R13: 00007fff99718590 R14: 0000558e9f2127a8 R15: 00007fff997180b0 [ 204.049256] </TASK> For instance, it can be triggered by running these two commands in parallel: $ while true; do echo hist:key=id.syscall:val=hitcount > \ /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger; done $ stress-ng --sysinfo $(nproc) The warning indicates that the current ring_buffer_per_cpu is not in the committing state. It happens because the active ring_buffer_event doesn't actually come from the ring_buffer_per_cpu but is allocated from trace_buffered_event. The bug is in function trace_buffered_event_disable() where the following normally happens: * The code invokes disable_trace_buffered_event() via smp_call_function_many() and follows it by synchronize_rcu(). This increments the per-CPU variable trace_buffered_event_cnt on each target CPU and grants trace_buffered_event_disable() the exclusive access to the per-CPU variable trace_buffered_event. * Maintenance is performed on trace_buffered_event, all per-CPU event buffers get freed. * The code invokes enable_trace_buffered_event() via smp_call_function_many(). This decrements trace_buffered_event_cnt and releases the access to trace_buffered_event. A problem is that smp_call_function_many() runs a given function on all target CPUs except on the current one. The following can then occur: * Task X executing trace_buffered_event_disable() runs on CPU 0. * The control reaches synchronize_rcu() and the task gets rescheduled on another CPU 1. * The RCU synchronization finishes. At this point, trace_buffered_event_disable() has the exclusive access to all trace_buffered_event variables except trace_buffered_event[CPU0] because trace_buffered_event_cnt[CPU0] is never incremented and if the buffer is currently unused, remains set to 0. * A different task Y is scheduled on CPU 0 and hits a trace event. The code in trace_event_buffer_lock_reserve() sees that trace_buffered_event_cnt[CPU0] is set to 0 and decides the use the buffer provided by trace_buffered_event[CPU0]. * Task X continues its execution in trace_buffered_event_disable(). The code incorrectly frees the event buffer pointed by trace_buffered_event[CPU0] and resets the variable to NULL. * Task Y writes event data to the now freed buffer and later detects the created inconsistency. The issue is observable since commit dea499781a11 ("tracing: Fix warning in trace_buffered_event_disable()") which moved the call of trace_buffered_event_disable() in __ftrace_event_enable_disable() earlier, prior to invoking call->class->reg(.. TRACE_REG_UNREGISTER ..). The underlying problem in trace_buffered_event_disable() is however present since the original implementation in commit 0fc1b09ff1ff ("tracing: Use temp buffer when filtering events"). Fix the problem by replacing the two smp_call_function_many() calls with on_each_cpu_mask() which invokes a given callback on all CPUs. Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/ Link: https://lkml.kernel.org/r/20231205161736.19663-2-petr.pavlu@suse.com Cc: stable@vger.kernel.org Fixes: 0fc1b09ff1ff ("tracing: Use temp buffer when filtering events") Fixes: dea499781a11 ("tracing: Fix warning in trace_buffered_event_disable()") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-05tracing: Disable snapshot buffer when stopping instance tracersSteven Rostedt (Google)
It use to be that only the top level instance had a snapshot buffer (for latency tracers like wakeup and irqsoff). When stopping a tracer in an instance would not disable the snapshot buffer. This could have some unintended consequences if the irqsoff tracer is enabled. Consolidate the tracing_start/stop() with tracing_start/stop_tr() so that all instances behave the same. The tracing_start/stop() functions will just call their respective tracing_start/stop_tr() with the global_array passed in. Link: https://lkml.kernel.org/r/20231205220011.041220035@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: 6d9b3fa5e7f6 ("tracing: Move tracing_max_latency into trace_array") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-05tracing: Stop current tracer when resizing bufferSteven Rostedt (Google)
When the ring buffer is being resized, it can cause side effects to the running tracer. For instance, there's a race with irqsoff tracer that swaps individual per cpu buffers between the main buffer and the snapshot buffer. The resize operation modifies the main buffer and then the snapshot buffer. If a swap happens in between those two operations it will break the tracer. Simply stop the running tracer before resizing the buffers and enable it again when finished. Link: https://lkml.kernel.org/r/20231205220010.748996423@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: 3928a8a2d9808 ("ftrace: make work with new ring buffer") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-12-05tracing: Always update snapshot buffer sizeSteven Rostedt (Google)
It use to be that only the top level instance had a snapshot buffer (for latency tracers like wakeup and irqsoff). The update of the ring buffer size would check if the instance was the top level and if so, it would also update the snapshot buffer as it needs to be the same as the main buffer. Now that lower level instances also has a snapshot buffer, they too need to update their snapshot buffer sizes when the main buffer is changed, otherwise the following can be triggered: # cd /sys/kernel/tracing # echo 1500 > buffer_size_kb # mkdir instances/foo # echo irqsoff > instances/foo/current_tracer # echo 1000 > instances/foo/buffer_size_kb Produces: WARNING: CPU: 2 PID: 856 at kernel/trace/trace.c:1938 update_max_tr_single.part.0+0x27d/0x320 Which is: ret = ring_buffer_swap_cpu(tr->max_buffer.buffer, tr->array_buffer.buffer, cpu); if (ret == -EBUSY) { [..] } WARN_ON_ONCE(ret && ret != -EAGAIN && ret != -EBUSY); <== here That's because ring_buffer_swap_cpu() has: int ret = -EINVAL; [..] /* At least make sure the two buffers are somewhat the same */ if (cpu_buffer_a->nr_pages != cpu_buffer_b->nr_pages) goto out; [..] out: return ret; } Instead, update all instances' snapshot buffer sizes when their main buffer size is updated. Link: https://lkml.kernel.org/r/20231205220010.454662151@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: 6d9b3fa5e7f6 ("tracing: Move tracing_max_latency into trace_array") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-11-19Merge tag 'timers_urgent_for_v6.7_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Borislav Petkov: - Do the push of pending hrtimers away from a CPU which is being offlined earlier in the offlining process in order to prevent a deadlock * tag 'timers_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimers: Push pending hrtimers away from outgoing CPU earlier
2023-11-19Merge tag 'sched_urgent_for_v6.7_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Fix virtual runtime calculation when recomputing a sched entity's weights - Fix wrongly rejected unprivileged poll requests to the cgroup psi pressure files - Make sure the load balancing is done by only one CPU * tag 'sched_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix the decision for load balance sched: psi: fix unprivileged polling against cgroups sched/eevdf: Fix vruntime adjustment on reweight
2023-11-19Merge tag 'locking_urgent_for_v6.7_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Borislav Petkov: - Fix a hardcoded futex flags case which lead to one robust futex test failure * tag 'locking_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Fix hardcoded flags
2023-11-19Merge tag 'perf_urgent_for_v6.7_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Borislav Petkov: - Make sure the context refcount is transferred too when migrating perf events * tag 'perf_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix cpuctx refcounting
2023-11-18Merge tag 'parisc-for-6.7-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "On parisc we still sometimes need writeable stacks, e.g. if programs aren't compiled with gcc-14. To avoid issues with the upcoming systemd-254 we therefore have to disable prctl(PR_SET_MDWE) for now (for parisc only). The other two patches are minor: a bugfix for the soft power-off on qemu with 64-bit kernel and prefer strscpy() over strlcpy(): - Fix power soft-off on qemu - Disable prctl(PR_SET_MDWE) since parisc sometimes still needs writeable stacks - Use strscpy instead of strlcpy in show_cpuinfo()" * tag 'parisc-for-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: prctl: Disable prctl(PR_SET_MDWE) on parisc parisc/power: Fix power soft-off when running on qemu parisc: Replace strlcpy() with strscpy()
2023-11-18prctl: Disable prctl(PR_SET_MDWE) on pariscHelge Deller
systemd-254 tries to use prctl(PR_SET_MDWE) for it's MemoryDenyWriteExecute functionality, but fails on parisc which still needs executable stacks in certain combinations of gcc/glibc/kernel. Disable prctl(PR_SET_MDWE) by returning -EINVAL for now on parisc, until userspace has catched up. Signed-off-by: Helge Deller <deller@gmx.de> Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Sam James <sam@gentoo.org> Closes: https://github.com/systemd/systemd/issues/29775 Tested-by: Sam James <sam@gentoo.org> Link: https://lore.kernel.org/all/875y2jro9a.fsf@gentoo.org/ Cc: <stable@vger.kernel.org> # v6.3+
2023-11-17Merge tag 'audit-pr-20231116' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit fix from Paul Moore: "One small audit patch to convert a WARN_ON_ONCE() into a normal conditional to avoid scary looking console warnings when eBPF code generates audit records from unexpected places" * tag 'audit-pr-20231116' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: don't WARN_ON_ONCE(!current->mm) in audit_exe_compare()
2023-11-16Merge tag 'net-6.7-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from BPF and netfilter. Current release - regressions: - core: fix undefined behavior in netdev name allocation - bpf: do not allocate percpu memory at init stage - netfilter: nf_tables: split async and sync catchall in two functions - mptcp: fix possible NULL pointer dereference on close Current release - new code bugs: - eth: ice: dpll: fix initial lock status of dpll Previous releases - regressions: - bpf: fix precision backtracking instruction iteration - af_unix: fix use-after-free in unix_stream_read_actor() - tipc: fix kernel-infoleak due to uninitialized TLV value - eth: bonding: stop the device in bond_setup_by_slave() - eth: mlx5: - fix double free of encap_header - avoid referencing skb after free-ing in drop path - eth: hns3: fix VF reset - eth: mvneta: fix calls to page_pool_get_stats Previous releases - always broken: - core: set SOCK_RCU_FREE before inserting socket into hashtable - bpf: fix control-flow graph checking in privileged mode - eth: ppp: limit MRU to 64K - eth: stmmac: avoid rx queue overrun - eth: icssg-prueth: fix error cleanup on failing initialization - eth: hns3: fix out-of-bounds access may occur when coalesce info is read via debugfs - eth: cortina: handle large frames Misc: - selftests: gso: support CONFIG_MAX_SKB_FRAGS up to 45" * tag 'net-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (78 commits) macvlan: Don't propagate promisc change to lower dev in passthru net: sched: do not offload flows with a helper in act_ct net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors net/mlx5e: Check return value of snprintf writing to fw_version buffer net/mlx5e: Reduce the size of icosq_str net/mlx5: Increase size of irq name buffer net/mlx5e: Update doorbell for port timestamping CQ before the software counter net/mlx5e: Track xmit submission to PTP WQ after populating metadata map net/mlx5e: Avoid referencing skb after free-ing in drop path of mlx5e_sq_xmit_wqe net/mlx5e: Don't modify the peer sent-to-vport rules for IPSec offload net/mlx5e: Fix pedit endianness net/mlx5e: fix double free of encap_header in update funcs net/mlx5e: fix double free of encap_header net/mlx5: Decouple PHC .adjtime and .adjphase implementations net/mlx5: DR, Allow old devices to use multi destination FTE net/mlx5: Free used cpus mask when an IRQ is released Revert "net/mlx5: DR, Supporting inline WQE when possible" bpf: Do not allocate percpu memory at init stage net: Fix undefined behavior in netdev name allocation dt-bindings: net: ethernet-controller: Fix formatting error ...
2023-11-15bpf: Do not allocate percpu memory at init stageYonghong Song
Kirill Shutemov reported significant percpu memory consumption increase after booting in 288-cpu VM ([1]) due to commit 41a5db8d8161 ("bpf: Add support for non-fix-size percpu mem allocation"). The percpu memory consumption is increased from 111MB to 969MB. The number is from /proc/meminfo. I tried to reproduce the issue with my local VM which at most supports upto 255 cpus. With 252 cpus, without the above commit, the percpu memory consumption immediately after boot is 57MB while with the above commit the percpu memory consumption is 231MB. This is not good since so far percpu memory from bpf memory allocator is not widely used yet. Let us change pre-allocation in init stage to on-demand allocation when verifier detects there is a need of percpu memory for bpf program. With this change, percpu memory consumption after boot can be reduced signicantly. [1] https://lore.kernel.org/lkml/20231109154934.4saimljtqx625l3v@box.shutemov.name/ Fixes: 41a5db8d8161 ("bpf: Add support for non-fix-size percpu mem allocation") Reported-and-tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20231111013928.948838-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-15perf/core: Fix cpuctx refcountingPeter Zijlstra
Audit of the refcounting turned up that perf_pmu_migrate_context() fails to migrate the ctx refcount. Fixes: bd2756811766 ("perf: Rewrite core context handling") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20230612093539.085862001@infradead.org Cc: <stable@vger.kernel.org>
2023-11-15futex: Fix hardcoded flagsPeter Zijlstra
Xi reported that commit 5694289ce183 ("futex: Flag conversion") broke glibc's robust futex tests. This was narrowed down to the change of FLAGS_SHARED from 0x01 to 0x10, at which point Florian noted that handle_futex_death() has a hardcoded flags argument of 1. Change this to: FLAGS_SIZE_32 | FLAGS_SHARED, matching how futex_to_flags() unconditionally sets FLAGS_SIZE_32 for all legacy futex ops. Reported-by: Xi Ruoyao <xry111@xry111.site> Reported-by: Florian Weimer <fweimer@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20231114201402.GA25315@noisy.programming.kicks-ass.net Fixes: 5694289ce183 ("futex: Flag conversion") Cc: <stable@vger.kernel.org>
2023-11-14audit: don't WARN_ON_ONCE(!current->mm) in audit_exe_compare()Paul Moore
eBPF can end up calling into the audit code from some odd places, and some of these places don't have @current set properly so we end up tripping the `WARN_ON_ONCE(!current->mm)` near the top of `audit_exe_compare()`. While the basic `!current->mm` check is good, the `WARN_ON_ONCE()` results in some scary console messages so let's drop that and just do the regular `!current->mm` check to avoid problems. Cc: <stable@vger.kernel.org> Fixes: 47846d51348d ("audit: don't take task_lock() in audit_exe_compare() code path") Reported-by: Artem Savkov <asavkov@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-11-14sched/fair: Fix the decision for load balanceKeisuke Nishimura
should_we_balance is called for the decision to do load-balancing. When sched ticks invoke this function, only one CPU should return true. However, in the current code, two CPUs can return true. The following situation, where b means busy and i means idle, is an example, because CPU 0 and CPU 2 return true. [0, 1] [2, 3] b b i b This fix checks if there exists an idle CPU with busy sibling(s) after looking for a CPU on an idle core. If some idle CPUs with busy siblings are found, just the first one should do load-balancing. Fixes: b1bfeab9b002 ("sched/fair: Consider the idle state of the whole core for load balance") Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Chen Yu <yu.c.chen@intel.com> Reviewed-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20231031133821.1570861-1-keisuke.nishimura@inria.fr
2023-11-14sched: psi: fix unprivileged polling against cgroupsJohannes Weiner
519fabc7aaba ("psi: remove 500ms min window size limitation for triggers") breaks unprivileged psi polling on cgroups. Historically, we had a privilege check for polling in the open() of a pressure file in /proc, but were erroneously missing it for the open() of cgroup pressure files. When unprivileged polling was introduced in d82caa273565 ("sched/psi: Allow unprivileged polling of N*2s period"), it needed to filter privileges depending on the exact polling parameters, and as such moved the CAP_SYS_RESOURCE check from the proc open() callback to psi_trigger_create(). Both the proc files as well as cgroup files go through this during write(). This implicitly added the missing check for privileges required for HT polling for cgroups. When 519fabc7aaba ("psi: remove 500ms min window size limitation for triggers") followed right after to remove further restrictions on the RT polling window, it incorrectly assumed the cgroup privilege check was still missing and added it to the cgroup open(), mirroring what we used to do for proc files in the past. As a result, unprivileged poll requests that would be supported now get rejected when opening the cgroup pressure file for writing. Remove the cgroup open() check. psi_trigger_create() handles it. Fixes: 519fabc7aaba ("psi: remove 500ms min window size limitation for triggers") Reported-by: Luca Boccassi <bluca@debian.org> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Luca Boccassi <bluca@debian.org> Acked-by: Suren Baghdasaryan <surenb@google.com> Cc: stable@vger.kernel.org # 6.5+ Link: https://lore.kernel.org/r/20231026164114.2488682-1-hannes@cmpxchg.org
2023-11-14sched/eevdf: Fix vruntime adjustment on reweightAbel Wu
vruntime of the (on_rq && !0-lag) entity needs to be adjusted when it gets re-weighted, and the calculations can be simplified based on the fact that re-weight won't change the w-average of all the entities. Please check the proofs in comments. But adjusting vruntime can also cause position change in RB-tree hence require re-queue to fix up which might be costly. This might be avoided by deferring adjustment to the time the entity actually leaves tree (dequeue/pick), but that will negatively affect task selection and probably not good enough either. Fixes: 147f3efaa241 ("sched/fair: Implement an EEVDF-like scheduling policy") Signed-off-by: Abel Wu <wuyun.abel@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20231107090510.71322-2-wuyun.abel@bytedance.com
2023-11-11hrtimers: Push pending hrtimers away from outgoing CPU earlierThomas Gleixner
2b8272ff4a70 ("cpu/hotplug: Prevent self deadlock on CPU hot-unplug") solved the straight forward CPU hotplug deadlock vs. the scheduler bandwidth timer. Yu discovered a more involved variant where a task which has a bandwidth timer started on the outgoing CPU holds a lock and then gets throttled. If the lock required by one of the CPU hotplug callbacks the hotplug operation deadlocks because the unthrottling timer event is not handled on the dying CPU and can only be recovered once the control CPU reaches the hotplug state which pulls the pending hrtimers from the dead CPU. Solve this by pushing the hrtimers away from the dying CPU in the dying callbacks. Nothing can queue a hrtimer on the dying CPU at that point because all other CPUs spin in stop_machine() with interrupts disabled and once the operation is finished the CPU is marked offline. Reported-by: Yu Liao <liaoyu15@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Liu Tie <liutie4@huawei.com> Link: https://lore.kernel.org/r/87a5rphara.ffs@tglx
2023-11-10Merge tag 'probes-fixes-v6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - Documentation update: Add a note about argument and return value fetching is the best effort because it depends on the type. - objpool: Fix to make internal global variables static in test_objpool.c. - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the same prototypes in asm/kprobes.h for some architectures, but some of them are missing the prototype and it causes a warning. So move the prototype into linux/kprobes.h. - tracing: Fix to check the tracepoint event and return event at parsing stage. The tracepoint event doesn't support %return but if $retval exists, it will be converted to %return silently. This finds that case and rejects it. - tracing: Fix the order of the descriptions about the parameters of __kprobe_event_gen_cmd_start() to be consistent with the argument list of the function. * tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/kprobes: Fix the order of argument descriptions tracing: fprobe-event: Fix to check tracepoint event and return kprobes: unify kprobes_exceptions_nofify() prototypes lib: test_objpool: make global variables static Documentation: tracing: Add a note about argument and retval access
2023-11-11tracing/kprobes: Fix the order of argument descriptionsYujie Liu
The order of descriptions should be consistent with the argument list of the function, so "kretprobe" should be the second one. int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe, const char *name, const char *loc, ...) Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/ Fixes: 2a588dd1d5d6 ("tracing: Add kprobe event command generation functions") Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Yujie Liu <yujie.liu@intel.com> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2023-11-10Merge tag 'dma-mapping-6.7-2023-11-10' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - don't leave pages decrypted for DMA in encrypted memory setups linger around on failure (Petr Tesarik) - fix an out of bounds access in the new dynamic swiotlb code (Petr Tesarik) - fix dma_addressing_limited for systems with weird physical memory layouts (Jia He) * tag 'dma-mapping-6.7-2023-11-10' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC dma-mapping: fix dma_addressing_limited() if dma_range_map can't cover all system RAM dma-mapping: move dma_addressing_limited() out of line swiotlb: do not free decrypted pages if dynamic
2023-11-10tracing: fprobe-event: Fix to check tracepoint event and returnMasami Hiramatsu (Google)
Fix to check the tracepoint event is not valid with $retval. The commit 08c9306fc2e3 ("tracing/fprobe-event: Assume fprobe is a return event by $retval") introduced automatic return probe conversion with $retval. But since tracepoint event does not support return probe, $retval is not acceptable. Without this fix, ftracetest, tprobe_syntax_errors.tc fails; [22] Tracepoint probe event parser error log check [FAIL] ---- # tail 22-tprobe_syntax_errors.tc-log.mRKroL + ftrace_errlog_check trace_fprobe t kfree ^$retval dynamic_events + printf %s t kfree + wc -c + pos=8 + printf %s t kfree ^$retval + tr -d ^ + command=t kfree $retval + echo Test command: t kfree $retval Test command: t kfree $retval + echo ---- So 't kfree $retval' should fail (tracepoint doesn't support return probe) but passed it. Link: https://lore.kernel.org/all/169944555933.45057.12831706585287704173.stgit@devnote2/ Fixes: 08c9306fc2e3 ("tracing/fprobe-event: Assume fprobe is a return event by $retval") Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2023-11-09bpf: fix control-flow graph checking in privileged modeAndrii Nakryiko
When BPF program is verified in privileged mode, BPF verifier allows bounded loops. This means that from CFG point of view there are definitely some back-edges. Original commit adjusted check_cfg() logic to not detect back-edges in control flow graph if they are resulting from conditional jumps, which the idea that subsequent full BPF verification process will determine whether such loops are bounded or not, and either accept or reject the BPF program. At least that's my reading of the intent. Unfortunately, the implementation of this idea doesn't work correctly in all possible situations. Conditional jump might not result in immediate back-edge, but just a few unconditional instructions later we can arrive at back-edge. In such situations check_cfg() would reject BPF program even in privileged mode, despite it might be bounded loop. Next patch adds one simple program demonstrating such scenario. To keep things simple, instead of trying to detect back edges in privileged mode, just assume every back edge is valid and let subsequent BPF verification prove or reject bounded loops. Note a few test changes. For unknown reason, we have a few tests that are specified to detect a back-edge in a privileged mode, but looking at their code it seems like the right outcome is passing check_cfg() and letting subsequent verification to make a decision about bounded or not bounded looping. Bounded recursion case is also interesting. The example should pass, as recursion is limited to just a few levels and so we never reach maximum number of nested frames and never exhaust maximum stack depth. But the way that max stack depth logic works today it falsely detects this as exceeding max nested frame count. This patch series doesn't attempt to fix this orthogonal problem, so we just adjust expected verifier failure. Suggested-by: Alexei Starovoitov <ast@kernel.org> Fixes: 2589726d12a1 ("bpf: introduce bounded loops") Reported-by: Hao Sun <sunhao.th@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231110061412.2995786-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-09bpf: fix precision backtracking instruction iterationAndrii Nakryiko
Fix an edge case in __mark_chain_precision() which prematurely stops backtracking instructions in a state if it happens that state's first and last instruction indexes are the same. This situations doesn't necessarily mean that there were no instructions simulated in a state, but rather that we starting from the instruction, jumped around a bit, and then ended up at the same instruction before checkpointing or marking precision. To distinguish between these two possible situations, we need to consult jump history. If it's empty or contain a single record "bridging" parent state and first instruction of processed state, then we indeed backtracked all instructions in this state. But if history is not empty, we are definitely not done yet. Move this logic inside get_prev_insn_idx() to contain it more nicely. Use -ENOENT return code to denote "we are out of instructions" situation. This bug was exposed by verifier_loop1.c's bounded_recursion subtest, once the next fix in this patch set is applied. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231110002638.4168352-3-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-09bpf: handle ldimm64 properly in check_cfg()Andrii Nakryiko
ldimm64 instructions are 16-byte long, and so have to be handled appropriately in check_cfg(), just like the rest of BPF verifier does. This has implications in three places: - when determining next instruction for non-jump instructions; - when determining next instruction for callback address ldimm64 instructions (in visit_func_call_insn()); - when checking for unreachable instructions, where second half of ldimm64 is expected to be unreachable; We take this also as an opportunity to report jump into the middle of ldimm64. And adjust few test_verifier tests accordingly. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Reported-by: Hao Sun <sunhao.th@gmail.com> Fixes: 475fb78fbf48 ("bpf: verifier (add branch/goto checks)") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231110002638.4168352-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-09Merge tag 'net-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter and bpf. Current release - regressions: - sched: fix SKB_NOT_DROPPED_YET splat under debug config Current release - new code bugs: - tcp: - fix usec timestamps with TCP fastopen - fix possible out-of-bounds reads in tcp_hash_fail() - fix SYN option room calculation for TCP-AO - tcp_sigpool: fix some off by one bugs - bpf: fix compilation error without CGROUPS - ptp: - ptp_read() should not release queue - fix tsevqs corruption Previous releases - regressions: - llc: verify mac len before reading mac header Previous releases - always broken: - bpf: - fix check_stack_write_fixed_off() to correctly spill imm - fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END - check map->usercnt after timer->timer is assigned - dsa: lan9303: consequently nested-lock physical MDIO - dccp/tcp: call security_inet_conn_request() after setting IP addr - tg3: fix the TX ring stall due to incorrect full ring handling - phylink: initialize carrier state at creation - ice: fix direction of VF rules in switchdev mode Misc: - fill in a bunch of missing MODULE_DESCRIPTION()s, more to come" * tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) net: ti: icss-iep: fix setting counter value ptp: fix corrupted list in ptp_open ptp: ptp_read should not release queue net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP net: kcm: fill in MODULE_DESCRIPTION() net/sched: act_ct: Always fill offloading tuple iifidx netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses netfilter: xt_recent: fix (increase) ipv6 literal buffer length ipvs: add missing module descriptions netfilter: nf_tables: remove catchall element in GC sync path netfilter: add missing module descriptions drivers/net/ppp: use standard array-copy-function net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt() r8169: respect userspace disabling IFF_MULTICAST selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg net: phylink: initialize carrier state at creation test/vsock: add dobule bind connect test test/vsock: refactor vsock_accept ...
generated by cgit (git 2.34.1) at 2024-06-30 22:29:05 +0000