summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2017-08-06Fix compat_sys_sigpending breakageDmitry V. Levin
The latest change of compat_sys_sigpending in commit 8f13621abced ("sigpending(): move compat to native") has broken it in two ways. First, it tries to write 4 bytes more than userspace expects: sizeof(old_sigset_t) == sizeof(long) == 8 instead of sizeof(compat_old_sigset_t) == sizeof(u32) == 4. Second, on big endian architectures these bytes are being written in the wrong order. This bug was found by strace test suite. Reported-by: Anatoly Pugachev <matorola@gmail.com> Inspired-by: Eugene Syromyatnikov <evgsyr@gmail.com> Fixes: 8f13621abced ("sigpending(): move compat to native") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix for a multiplication overflow in the timer code on 32bit systems" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Fix overflow in get_next_timer_interrupt
2017-08-02cpuset: fix a deadlock due to incomplete patching of cpusets_enabled()Dima Zavin
In codepaths that use the begin/retry interface for reading mems_allowed_seq with irqs disabled, there exists a race condition that stalls the patch process after only modifying a subset of the static_branch call sites. This problem manifested itself as a deadlock in the slub allocator, inside get_any_partial. The loop reads mems_allowed_seq value (via read_mems_allowed_begin), performs the defrag operation, and then verifies the consistency of mem_allowed via the read_mems_allowed_retry and the cookie returned by xxx_begin. The issue here is that both begin and retry first check if cpusets are enabled via cpusets_enabled() static branch. This branch can be rewritted dynamically (via cpuset_inc) if a new cpuset is created. The x86 jump label code fully synchronizes across all CPUs for every entry it rewrites. If it rewrites only one of the callsites (specifically the one in read_mems_allowed_retry) and then waits for the smp_call_function(do_sync_core) to complete while a CPU is inside the begin/retry section with IRQs off and the mems_allowed value is changed, we can hang. This is because begin() will always return 0 (since it wasn't patched yet) while retry() will test the 0 against the actual value of the seq counter. The fix is to use two different static keys: one for begin (pre_enable_key) and one for retry (enable_key). In cpuset_inc(), we first bump the pre_enable key to ensure that cpuset_mems_allowed_begin() always return a valid seqcount if are enabling cpusets. Similarly, when disabling cpusets via cpuset_dec(), we first ensure that callers of cpuset_mems_allowed_retry() will start ignoring the seqcount value before we let cpuset_mems_allowed_begin() return 0. The relevant stack traces of the two stuck threads: CPU: 1 PID: 1415 Comm: mkdir Tainted: G L 4.9.36-00104-g540c51286237 #4 Hardware name: Default string Default string/Hardware, BIOS 4.29.1-20170526215256 05/26/2017 task: ffff8817f9c28000 task.stack: ffffc9000ffa4000 RIP: smp_call_function_many+0x1f9/0x260 Call Trace: smp_call_function+0x3b/0x70 on_each_cpu+0x2f/0x90 text_poke_bp+0x87/0xd0 arch_jump_label_transform+0x93/0x100 __jump_label_update+0x77/0x90 jump_label_update+0xaa/0xc0 static_key_slow_inc+0x9e/0xb0 cpuset_css_online+0x70/0x2e0 online_css+0x2c/0xa0 cgroup_apply_control_enable+0x27f/0x3d0 cgroup_mkdir+0x2b7/0x420 kernfs_iop_mkdir+0x5a/0x80 vfs_mkdir+0xf6/0x1a0 SyS_mkdir+0xb7/0xe0 entry_SYSCALL_64_fastpath+0x18/0xad ... CPU: 2 PID: 1 Comm: init Tainted: G L 4.9.36-00104-g540c51286237 #4 Hardware name: Default string Default string/Hardware, BIOS 4.29.1-20170526215256 05/26/2017 task: ffff8818087c0000 task.stack: ffffc90000030000 RIP: int3+0x39/0x70 Call Trace: <#DB> ? ___slab_alloc+0x28b/0x5a0 <EOE> ? copy_process.part.40+0xf7/0x1de0 __slab_alloc.isra.80+0x54/0x90 copy_process.part.40+0xf7/0x1de0 copy_process.part.40+0xf7/0x1de0 kmem_cache_alloc_node+0x8a/0x280 copy_process.part.40+0xf7/0x1de0 _do_fork+0xe7/0x6c0 _raw_spin_unlock_irq+0x2d/0x60 trace_hardirqs_on_caller+0x136/0x1d0 entry_SYSCALL_64_fastpath+0x5/0xad do_syscall_64+0x27/0x350 SyS_clone+0x19/0x20 do_syscall_64+0x60/0x350 entry_SYSCALL64_slow_path+0x25/0x25 Link: http://lkml.kernel.org/r/20170731040113.14197-1-dmitriyz@waymo.com Fixes: 46e700abc44c ("mm, page_alloc: remove unnecessary taking of a seqlock when cpusets are disabled") Signed-off-by: Dima Zavin <dmitriyz@waymo.com> Reported-by: Cliff Spradlin <cspradlin@waymo.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christopher Lameter <cl@linux.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02pid: kill pidhash_size in pidhash_init()Kefeng Wang
After commit 3d375d78593c ("mm: update callers to use HASH_ZERO flag"), drop unused pidhash_size in pidhash_init(). Link: http://lkml.kernel.org/r/1500389267-49222-1-git-send-email-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Pavel Tatashin <Pasha.Tatashin@Oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-01timers: Fix overflow in get_next_timer_interruptMatija Glavinic Pecotic
For e.g. HZ=100, timer being 430 jiffies in the future, and 32 bit unsigned int, there is an overflow on unsigned int right-hand side of the expression which results with wrong values being returned. Type cast the multiplier to 64bit to avoid that issue. Fixes: 46c8f0b077a8 ("timers: Fix get_next_timer_interrupt() computation") Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: khilman@baylibre.com Cc: akpm@linux-foundation.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/a7900f04-2a21-c9fd-67be-ab334d459ee5@nokia.com
2017-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Handle notifier registry failures properly in tun/tap driver, from Tonghao Zhang. 2) Fix bpf verifier handling of subtraction bounds and add a testcase for this, from Edward Cree. 3) Increase reset timeout in ftgmac100 driver, from Ben Herrenschmidt. 4) Fix use after free in prd_retire_rx_blk_timer_exired() in AF_PACKET, from Cong Wang. 5) Fix SElinux regression due to recent UDP optimizations, from Paolo Abeni. 6) We accidently increment IPSTATS_MIB_FRAGFAILS in the ipv6 code paths, fix from Stefano Brivio. 7) Fix some mem leaks in dccp, from Xin Long. 8) Adjust MDIO_BUS kconfig deps to avoid build errors, from Arnd Bergmann. 9) Mac address length check and buffer size fixes from Cong Wang. 10) Don't leak sockets in ipv6 udp early demux, from Paolo Abeni. 11) Fix return value when copy_from_user() fails in bpf_prog_get_info_by_fd(), from Daniel Borkmann. 12) Handle PHY_HALTED properly in phy library state machine, from Florian Fainelli. 13) Fix OOPS in fib_sync_down_dev(), from Ido Schimmel. 14) Fix truesize calculation in virtio_net which led to performance regressions, from Michael S Tsirkin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) samples/bpf: fix bpf tunnel cleanup udp6: fix jumbogram reception ppp: Fix a scheduling-while-atomic bug in del_chan Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config" virtio_net: fix truesize for mergeable buffers mv643xx_eth: fix of_irq_to_resource() error check MAINTAINERS: Add more files to the PHY LIBRARY section ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev() net: phy: Correctly process PHY_HALTED in phy_stop_machine() sunhme: fix up GREG_STAT and GREG_IMASK register offsets bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len tcp: avoid bogus gcc-7 array-bounds warning net: tc35815: fix spelling mistake: "Intterrupt" -> "Interrupt" bpf: don't indicate success when copy_from_user fails udp6: fix socket leak on early demux net: thunderx: Fix BGX transmit stall due to underflow Revert "vhost: cache used event for better performance" team: use a larger struct for mac address net: check dev->addr_len for dev_set_mac_address() phy: bcm-ns-usb3: fix MDIO_BUS dependency ...
2017-07-31Merge branch 'for-4.13-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "Several cgroup bug fixes. - cgroup core was calling a migration callback on empty migrations, which could make cpuset crash. - There was a very subtle bug where the controller interface files aren't created directly when cgroup2 is mounted. Because later operations create them, this bug didn't get noticed earlier. - Failed writes to cgroup.subtree_control were incorrectly returning zero" * 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix error return value from cgroup_subtree_control() cgroup: create dfl_root files on subsys registration cgroup: don't call migration methods if there are no tasks to migrate
2017-07-31Merge branch 'for-4.13-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fixes from Tejun Heo: "Two notable fixes. - While adding NUMA affinity support to unbound workqueues, the assumption that an unbound workqueue with max_active == 1 is ordered was broken. The plan was to use explicit alloc_ordered_workqueue() for those cases. Unfortunately, I forgot to update the documentation properly and we grew a handful of use cases which depend on that assumption. While we want to convert them to alloc_ordered_workqueue(), we don't really lose anything by enforcing ordered execution on unbound max_active == 1 workqueues and it doesn't make sense to risk subtle bugs. Restore the assumption. - Workqueue assumes that CPU <-> NUMA node mapping remains static. This is a general assumption - we don't have any synchronization mechanism around CPU <-> node mapping. Unfortunately, powerpc may change the mapping dynamically leading to crashes. Michael added a workaround so that we at least don't crash while powerpc hotplug code gets updated" * 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Work around edge cases for calc of pool's cpumask workqueue: implicit ordered attribute should be overridable workqueue: restore WQ_UNBOUND/max_active==1 to be ordered
2017-07-30Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "Two patches addressing build warnings caused by inconsistent kernel doc comments" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/wait: Clean up some documentation warnings sched/core: Fix some documentation build warnings
2017-07-29bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_lenDaniel Borkmann
bpf_prog_size(prog->len) is not the correct length we want to dump back to user space. The code in bpf_prog_get_info_by_fd() uses this to copy prog->insnsi to user space, but bpf_prog_size(prog->len) also includes the size of struct bpf_prog itself plus program instructions and is usually used either in context of accounting or for bpf_prog_alloc() et al, thus we copy out of bounds in bpf_prog_get_info_by_fd() potentially. Use the correct bpf_prog_insn_size() instead. Fixes: 1e2709769086 ("bpf: Add BPF_OBJ_GET_INFO_BY_FD") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29bpf: don't indicate success when copy_from_user failsDaniel Borkmann
err in bpf_prog_get_info_by_fd() still holds 0 at that time from prior check_uarg_tail_zero() check. Explicitly return -EFAULT instead, so user space can be notified of buggy behavior. Fixes: 1e2709769086 ("bpf: Add BPF_OBJ_GET_INFO_BY_FD") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-28workqueue: Work around edge cases for calc of pool's cpumaskMichael Bringmann
There is an underlying assumption/trade-off in many layers of the Linux system that CPU <-> node mapping is static. This is despite the presence of features like NUMA and 'hotplug' that support the dynamic addition/ removal of fundamental system resources like CPUs and memory. PowerPC systems, however, do provide extensive features for the dynamic change of resources available to a system. Currently, there is little or no synchronization protection around the updating of the CPU <-> node mapping, and the export/update of this information for other layers / modules. In systems which can change this mapping during 'hotplug', like PowerPC, the information is changing underneath all layers that might reference it. This patch attempts to ensure that a valid, usable cpumask attribute is used by the workqueue infrastructure when setting up new resource pools. It prevents a crash that has been observed when an 'empty' cpumask is passed along to the worker/task scheduling code. It is intended as a temporary workaround until a more fundamental review and correction of the issue can be done. [With additions to the patch provided by Tejun Hao <tj@kernel.org>] Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-27genirq/cpuhotplug: Revert "Set force affinity flag on hotplug migration"Thomas Gleixner
That commit was part of the changes moving x86 to the generic CPU hotplug interrupt migration code. The force flag was required on x86 before the hierarchical irqdomain rework, but invoking set_affinity() with force=true stayed and had no side effects. At some point in the past, the force flag got repurposed to support the exynos timer interrupt affinity setting to a not yet online CPU, so the interrupt controller callback does not verify the supplied affinity mask against cpu_online_mask. Setting the flag in the CPU hotplug code causes the cpu online masking to be blocked on these irq controllers and results in potentially affining an interrupt to the CPU which is unplugged, i.e. instead of moving it away, it's just reassigned to it. As the force flags is not longer needed on x86, it's safe to revert that patch so the ARM irqchips which use the force flag work again. Add comments to that effect, so this won't happen again. Note: The online mask handling should be done in the generic code and the force flag and the masking in the irq chips removed all together, but that's not a change possible for 4.13. Fixes: 77f85e66aa8b ("genirq/cpuhotplug: Set force affinity flag on hotplug migration") Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: LAK <linux-arm-kernel@lists.infradead.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1707271217590.3109@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-07-25workqueue: implicit ordered attribute should be overridableTejun Heo
5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered") automatically enabled ordered attribute for unbound workqueues w/ max_active == 1. Because ordered workqueues reject max_active and some attribute changes, this implicit ordered mode broke cases where the user creates an unbound workqueue w/ max_active == 1 and later explicitly changes the related attributes. This patch distinguishes explicit and implicit ordered setting and overrides from attribute changes if implict. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
2017-07-25sched/core: Fix some documentation build warningsJonathan Corbet
The kerneldoc comments for try_to_wake_up_local() were out of date, leading to these documentation build warnings: ./kernel/sched/core.c:2080: warning: No description found for parameter 'rf' ./kernel/sched/core.c:2080: warning: Excess function parameter 'cookie' description in 'try_to_wake_up_local' Update the comment to reflect current reality and give us some peace and quiet. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/20170724135628.695cecfc@lwn.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-24bpf/verifier: fix min/max handling in BPF_SUBEdward Cree
We have to subtract the src max from the dst min, and vice-versa, since (e.g.) the smallest result comes from the largest subtrahend. Fixes: 484611357c19 ("bpf: allow access into map value arrays") Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-23cgroup: fix error return value from cgroup_subtree_control()Tejun Heo
While refactoring, f7b2814bb9b6 ("cgroup: factor out cgroup_{apply|finalize}_control() from cgroup_subtree_control_write()") broke error return value from the function. The return value from the last operation is always overridden to zero. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-21Merge tag 'trace-v4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Three minor updates - Use the new GFP_RETRY_MAYFAIL to be more aggressive in allocating memory for the ring buffer without causing OOMs - Fix a memory leak in adding and removing instances - Add __rcu annotation to be able to debug RCU usage of function tracing a bit better" * tag 'trace-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: trace: fix the errors caused by incompatible type of RCU variables tracing: Fix kmemleak in instance_rmdir tracing/ring_buffer: Try harder to allocate
2017-07-21Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "A cputime fix and code comments/organization fix to the deadline scheduler" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Fix confusing comments about selection of top pi-waiter sched/cputime: Don't use smp_processor_id() in preemptible context
2017-07-21Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two hw-enablement patches, two race fixes, three fixes for regressions of semantics, plus a number of tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Add proper condition to run sched_task callbacks perf/core: Fix locking for children siblings group read perf/core: Fix scheduling regression of pinned groups perf/x86/intel: Fix debug_store reset field for freq events perf/x86/intel: Add Goldmont Plus CPU PMU support perf/x86/intel: Enable C-state residency events for Apollo Lake perf symbols: Accept zero as the kernel base address Revert "perf/core: Drop kernel samples even though :u is specified" perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target perf evsel: State in the default event name if attr.exclude_kernel is set perf evsel: Fix attr.exclude_kernel setting for default cycles:p
2017-07-21Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixlet from Ingo Molnar: "Remove an unnecessary priority adjustment in the rtmutex code" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rtmutex: Remove unnecessary priority adjustment
2017-07-21Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "A resume_irq() fix, plus a number of static declaration fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/digicolor: Drop unnecessary static irqchip/mips-cpu: Drop unnecessary static irqchip/gic/realview: Drop unnecessary static irqchip/mips-gic: Remove population of irq domain names genirq/PM: Properly pretend disabled state when force resuming interrupts
2017-07-21perf/core: Fix locking for children siblings group readJiri Olsa
We're missing ctx lock when iterating children siblings within the perf_read path for group reading. Following race and crash can happen: User space doing read syscall on event group leader: T1: perf_read lock event->ctx->mutex perf_read_group lock leader->child_mutex __perf_read_group_add(child) list_for_each_entry(sub, &leader->sibling_list, group_entry) ----> sub might be invalid at this point, because it could get removed via perf_event_exit_task_context in T2 Child exiting and cleaning up its events: T2: perf_event_exit_task_context lock ctx->mutex list_for_each_entry_safe(child_event, next, &child_ctx->event_list,... perf_event_exit_event(child) lock ctx->lock perf_group_detach(child) unlock ctx->lock ----> child is removed from sibling_list without any sync with T1 path above ... free_event(child) Before the child is removed from the leader's child_list, (and thus is omitted from perf_read_group processing), we need to ensure that perf_read_group touches child's siblings under its ctx->lock. Peter further notes: | One additional note; this bug got exposed by commit: | | ba5213ae6b88 ("perf/core: Correct event creation with PERF_FORMAT_GROUP") | | which made it possible to actually trigger this code-path. Tested-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: ba5213ae6b88 ("perf/core: Correct event creation with PERF_FORMAT_GROUP") Link: http://lkml.kernel.org/r/20170720141455.2106-1-jolsa@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) BPF verifier signed/unsigned value tracking fix, from Daniel Borkmann, Edward Cree, and Josef Bacik. 2) Fix memory allocation length when setting up calls to ->ndo_set_mac_address, from Cong Wang. 3) Add a new cxgb4 device ID, from Ganesh Goudar. 4) Fix FIB refcount handling, we have to set it's initial value before the configure callback (which can bump it). From David Ahern. 5) Fix double-free in qcom/emac driver, from Timur Tabi. 6) A bunch of gcc-7 string format overflow warning fixes from Arnd Bergmann. 7) Fix link level headroom tests in ip_do_fragment(), from Vasily Averin. 8) Fix chunk walking in SCTP when iterating over error and parameter headers. From Alexander Potapenko. 9) TCP BBR congestion control fixes from Neal Cardwell. 10) Fix SKB fragment handling in bcmgenet driver, from Doug Berger. 11) BPF_CGROUP_RUN_PROG_SOCK_OPS needs to check for null __sk, from Cong Wang. 12) xmit_recursion in ppp driver needs to be per-device not per-cpu, from Gao Feng. 13) Cannot release skb->dst in UDP if IP options processing needs it. From Paolo Abeni. 14) Some netdev ioctl ifr_name[] NULL termination fixes. From Alexander Levin and myself. 15) Revert some rtnetlink notification changes that are causing regressions, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits) net: bonding: Fix transmit load balancing in balance-alb mode rds: Make sure updates to cp_send_gen can be observed net: ethernet: ti: cpsw: Push the request_irq function to the end of probe ipv4: initialize fib_trie prior to register_netdev_notifier call. rtnetlink: allocate more memory for dev_set_mac_address() net: dsa: b53: Add missing ARL entries for BCM53125 bpf: more tests for mixed signed and unsigned bounds checks bpf: add test for mixed signed and unsigned bounds checks bpf: fix up test cases with mixed signed/unsigned bounds bpf: allow to specify log level and reduce it for test_verifier bpf: fix mixed signed/unsigned derived min/max value bounds ipv6: avoid overflow of offset in ip6_find_1stfragopt net: tehuti: don't process data if it has not been copied from userspace Revert "rtnetlink: Do not generate notifications for CHANGEADDR event" net: dsa: mv88e6xxx: Enable CMODE config support for 6390X dt-binding: ptp: Add SoC compatibility strings for dte ptp clock NET: dwmac: Make dwmac reset unconditional net: Zero terminate ifr_name in dev_ifname(). wireless: wext: terminate ifr name coming from userspace netfilter: fix netfilter_net_init() return ...
2017-07-20bpf: fix mixed signed/unsigned derived min/max value boundsDaniel Borkmann
Edward reported that there's an issue in min/max value bounds tracking when signed and unsigned compares both provide hints on limits when having unknown variables. E.g. a program such as the following should have been rejected: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff8a94cda93400 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 11: (65) if r1 s> 0x1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 14: (b7) r0 = 0 15: (95) exit What happens is that in the first part ... 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 ... r1 carries an unsigned value, and is compared as unsigned against a register carrying an immediate. Verifier deduces in reg_set_min_max() that since the compare is unsigned and operation is greater than (>), that in the fall-through/false case, r1's minimum bound must be 0 and maximum bound must be r2. Latter is larger than the bound and thus max value is reset back to being 'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now 'R1=inv,min_value=0'. The subsequent test ... 11: (65) if r1 s> 0x1 goto pc+2 ... is a signed compare of r1 with immediate value 1. Here, verifier deduces in reg_set_min_max() that since the compare is signed this time and operation is greater than (>), that in the fall-through/false case, we can deduce that r1's maximum bound must be 1, meaning with prior test, we result in r1 having the following state: R1=inv,min_value=0,max_value=1. Given that the actual value this holds is -8, the bounds are wrongly deduced. When this is being added to r0 which holds the map_value(_adj) type, then subsequent store access in above case will go through check_mem_access() which invokes check_map_access_adj(), that will then probe whether the map memory is in bounds based on the min_value and max_value as well as access size since the actual unknown value is min_value <= x <= max_value; commit fce366a9dd0d ("bpf, verifier: fix alu ops against map_value{, _adj} register types") provides some more explanation on the semantics. It's worth to note in this context that in the current code, min_value and max_value tracking are used for two things, i) dynamic map value access via check_map_access_adj() and since commit 06c1c049721a ("bpf: allow helpers access to variable memory") ii) also enforced at check_helper_mem_access() when passing a memory address (pointer to packet, map value, stack) and length pair to a helper and the length in this case is an unknown value defining an access range through min_value/max_value in that case. The min_value/max_value tracking is /not/ used in the direct packet access case to track ranges. However, the issue also affects case ii), for example, the following crafted program based on the same principle must be rejected as well: 0: (b7) r2 = 0 1: (bf) r3 = r10 2: (07) r3 += -512 3: (7a) *(u64 *)(r10 -16) = -8 4: (79) r4 = *(u64 *)(r10 -16) 5: (b7) r6 = -1 6: (2d) if r4 > r6 goto pc+5 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 7: (65) if r4 s> 0x1 goto pc+4 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 8: (07) r4 += 1 9: (b7) r5 = 0 10: (6a) *(u16 *)(r10 -512) = 0 11: (85) call bpf_skb_load_bytes#26 12: (b7) r0 = 0 13: (95) exit Meaning, while we initialize the max_value stack slot that the verifier thinks we access in the [1,2] range, in reality we pass -7 as length which is interpreted as u32 in the helper. Thus, this issue is relevant also for the case of helper ranges. Resetting both bounds in check_reg_overflow() in case only one of them exceeds limits is also not enough as similar test can be created that uses values which are within range, thus also here learned min value in r1 is incorrect when mixed with later signed test to create a range: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff880ad081fa00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (65) if r1 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 14: (b7) r0 = 0 15: (95) exit This leaves us with two options for fixing this: i) to invalidate all prior learned information once we switch signed context, ii) to track min/max signed and unsigned boundaries separately as done in [0]. (Given latter introduces major changes throughout the whole verifier, it's rather net-next material, thus this patch follows option i), meaning we can derive bounds either from only signed tests or only unsigned tests.) There is still the case of adjust_reg_min_max_vals(), where we adjust bounds on ALU operations, meaning programs like the following where boundaries on the reg get mixed in context later on when bounds are merged on the dst reg must get rejected, too: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff89b2bf87ce00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+6 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (b7) r7 = 1 12: (65) if r7 s> 0x0 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp 13: (b7) r0 = 0 14: (95) exit from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp 15: (0f) r7 += r1 16: (65) if r7 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 17: (0f) r0 += r7 18: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 19: (b7) r0 = 0 20: (95) exit Meaning, in adjust_reg_min_max_vals() we must also reset range values on the dst when src/dst registers have mixed signed/ unsigned derived min/max value bounds with one unbounded value as otherwise they can be added together deducing false boundaries. Once both boundaries are established from either ALU ops or compare operations w/o mixing signed/unsigned insns, then they can safely be added to other regs also having both boundaries established. Adding regs with one unbounded side to a map value where the bounded side has been learned w/o mixing ops is possible, but the resulting map value won't recover from that, meaning such op is considered invalid on the time of actual access. Invalid bounds are set on the dst reg in case i) src reg, or ii) in case dst reg already had them. The only way to recover would be to perform i) ALU ops but only 'add' is allowed on map value types or ii) comparisons, but these are disallowed on pointers in case they span a range. This is fine as only BPF_JEQ and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers which potentially turn them into PTR_TO_MAP_VALUE type depending on the branch, so only here min/max value cannot be invalidated for them. In terms of state pruning, value_from_signed is considered as well in states_equal() when dealing with adjusted map values. With regards to breaking existing programs, there is a small risk, but use-cases are rather quite narrow where this could occur and mixing compares probably unlikely. Joint work with Josef and Edward. [0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html Fixes: 484611357c19 ("bpf: allow access into map value arrays") Reported-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20Merge branch 'stable-4.13' of git://git.infradead.org/users/pcmoore/auditLinus Torvalds
Pull audit fix from Paul Moore: "A small audit fix, just a single line, to plug a memory leak in some audit error handling code" * 'stable-4.13' of git://git.infradead.org/users/pcmoore/audit: audit: fix memleak in auditd_send_unicast_skb.
2017-07-20trace: fix the errors caused by incompatible type of RCU variablesChunyan Zhang
The variables which are processed by RCU functions should be annotated as RCU, otherwise sparse will report the errors like below: "error: incompatible types in comparison expression (different address spaces)" Link: http://lkml.kernel.org/r/1496823171-7758-1-git-send-email-zhang.chunyan@linaro.org Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> [ Updated to not be 100% 80 column strict ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-07-20tracing: Fix kmemleak in instance_rmdirChunyu Hu
Hit the kmemleak when executing instance_rmdir, it forgot releasing mem of tracing_cpumask. With this fix, the warn does not appear any more. unreferenced object 0xffff93a8dfaa7c18 (size 8): comm "mkdir", pid 1436, jiffies 4294763622 (age 9134.308s) hex dump (first 8 bytes): ff ff ff ff ff ff ff ff ........ backtrace: [<ffffffff88b6567a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff8861ea41>] __kmalloc_node+0xf1/0x280 [<ffffffff88b505d3>] alloc_cpumask_var_node+0x23/0x30 [<ffffffff88b5060e>] alloc_cpumask_var+0xe/0x10 [<ffffffff88571ab0>] instance_mkdir+0x90/0x240 [<ffffffff886e5100>] tracefs_syscall_mkdir+0x40/0x70 [<ffffffff886565c9>] vfs_mkdir+0x109/0x1b0 [<ffffffff8865b1d0>] SyS_mkdir+0xd0/0x100 [<ffffffff88403857>] do_syscall_64+0x67/0x150 [<ffffffff88b710e7>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff Link: http://lkml.kernel.org/r/1500546969-12594-1-git-send-email-chuhu@redhat.com Cc: stable@vger.kernel.org Fixes: ccfe9e42e451 ("tracing: Make tracing_cpumask available for all instances") Signed-off-by: Chunyu Hu <chuhu@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-07-20perf/core: Fix scheduling regression of pinned groupsAlexander Shishkin
Vince Weaver reported: > I was tracking down some regressions in my perf_event_test testsuite. > Some of the tests broke in the 4.11-rc1 timeframe. > > I've bisected one of them, this report is about > tests/overflow/simul_oneshot_group_overflow > This test creates an event group containing two sampling events, set > to overflow to a signal handler (which disables and then refreshes the > event). > > On a good kernel you get the following: > Event perf::instructions with period 1000000 > Event perf::instructions with period 2000000 > fd 3 overflows: 946 (perf::instructions/1000000) > fd 4 overflows: 473 (perf::instructions/2000000) > Ending counts: > Count 0: 946379875 > Count 1: 946365218 > > With the broken kernels you get: > Event perf::instructions with period 1000000 > Event perf::instructions with period 2000000 > fd 3 overflows: 938 (perf::instructions/1000000) > fd 4 overflows: 318 (perf::instructions/2000000) > Ending counts: > Count 0: 946373080 > Count 1: 653373058 The root cause of the bug is that the following commit: 487f05e18a ("perf/core: Optimize event rescheduling on active contexts") erronously assumed that event's 'pinned' setting determines whether the event belongs to a pinned group or not, but in fact, it's the group leader's pinned state that matters. This was discovered by Vince in the test case described above, where two instruction counters are grouped, the group leader is pinned, but the other event is not; in the regressed case the counters were off by 33% (the difference between events' periods), but should be the same within the error margin. Fix the problem by looking at the group leader's pinning. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 487f05e18a ("perf/core: Optimize event rescheduling on active contexts") Link: http://lkml.kernel.org/r/87lgnmvw7h.fsf@ashishki-desk.ger.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-19Merge tag 'gcc-plugins-v4.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull structure randomization updates from Kees Cook: "Now that IPC and other changes have landed, enable manual markings for randstruct plugin, including the task_struct. This is the rest of what was staged in -next for the gcc-plugins, and comes in three patches, largest first: - mark "easy" structs with __randomize_layout - mark task_struct with an optional anonymous struct to isolate the __randomize_layout section - mark structs to opt _out_ of automated marking (which will come later) And, FWIW, this continues to pass allmodconfig (normal and patched to enable gcc-plugins) builds of x86_64, i386, arm64, arm, powerpc, and s390 for me" * tag 'gcc-plugins-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: randstruct: opt-out externally exposed function pointer structs task_struct: Allow randomized layout randstruct: Mark various structs for randomization
2017-07-19workqueue: restore WQ_UNBOUND/max_active==1 to be orderedTejun Heo
The combination of WQ_UNBOUND and max_active == 1 used to imply ordered execution. After NUMA affinity 4c16bd327c74 ("workqueue: implement NUMA affinity for unbound workqueues"), this is no longer true due to per-node worker pools. While the right way to create an ordered workqueue is alloc_ordered_workqueue(), the documentation has been misleading for a long time and people do use WQ_UNBOUND and max_active == 1 for ordered workqueues which can lead to subtle bugs which are very difficult to trigger. It's unlikely that we'd see noticeable performance impact by enforcing ordering on WQ_UNBOUND / max_active == 1 workqueues. Let's automatically set __WQ_ORDERED for those workqueues. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Christoph Hellwig <hch@infradead.org> Reported-by: Alexei Potashnik <alexei@purestorage.com> Fixes: 4c16bd327c74 ("workqueue: implement NUMA affinity for unbound workqueues") Cc: stable@vger.kernel.org # v3.10+
2017-07-19audit: fix memleak in auditd_send_unicast_skb.Shu Wang
Found this issue by kmemleak report, auditd_send_unicast_skb did not free skb if rcu_dereference(auditd_conn) returns null. unreferenced object 0xffff88082568ce00 (size 256): comm "auditd", pid 1119, jiffies 4294708499 backtrace: [<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff8121820c>] kmem_cache_alloc_node+0xcc/0x210 [<ffffffff8161b99d>] __alloc_skb+0x5d/0x290 [<ffffffff8113c614>] audit_make_reply+0x54/0xd0 [<ffffffff8113dfa7>] audit_receive_msg+0x967/0xd70 ---------------- (gdb) list *audit_receive_msg+0x967 0xffffffff8113dff7 is in audit_receive_msg (kernel/audit.c:1133). 1132 skb = audit_make_reply(0, AUDIT_REPLACE, 0, 0, &pvnr, sizeof(pvnr)); --------------- [<ffffffff8113e402>] audit_receive+0x52/0xa0 [<ffffffff8166c561>] netlink_unicast+0x181/0x240 [<ffffffff8166c8e2>] netlink_sendmsg+0x2c2/0x3b0 [<ffffffff816112e8>] sock_sendmsg+0x38/0x50 [<ffffffff816117a2>] SYSC_sendto+0x102/0x190 [<ffffffff81612f4e>] SyS_sendto+0xe/0x10 [<ffffffff8176d337>] entry_SYSCALL_64_fastpath+0x1a/0xa5 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Shu Wang <shuwang@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-07-19tracing/ring_buffer: Try harder to allocateJoel Fernandes
ftrace can fail to allocate per-CPU ring buffer on systems with a large number of CPUs coupled while large amounts of cache happening in the page cache. Currently the ring buffer allocation doesn't retry in the VM implementation even if direct-reclaim made some progress but still wasn't able to find a free page. On retrying I see that the allocations almost always succeed. The retry doesn't happen because __GFP_NORETRY is used in the tracer to prevent the case where we might OOM, however if we drop __GFP_NORETRY, we risk destabilizing the system if OOM killer is triggered. To prevent this situation, use the __GFP_RETRY_MAYFAIL flag introduced recently [1]. Tested the following still succeeds without destabilizing a system with 1GB memory. echo 300000 > /sys/kernel/debug/tracing/buffer_size_kb [1] https://marc.info/?l=linux-mm&m=149820805124906&w=2 Link: http://lkml.kernel.org/r/20170713021416.8897-1-joelaf@google.com Cc: Tim Murray <timmurray@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@kernel.org> Signed-off-by: Joel Fernandes <joelaf@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-07-18cgroup: create dfl_root files on subsys registrationTejun Heo
On subsystem registration, css_populate_dir() is not called on the new root css, so the interface files for the subsystem on cgrp_dfl_root aren't created on registration. This is a residue from the days when cgrp_dfl_root was used only as the parking spot for unused subsystems, which no longer is true as it's used as the root for cgroup2. This is often fine as later operations tend to create them as a part of mount (cgroup1) or subtree_control operations (cgroup2); however, it's not difficult to mount cgroup2 with the controller interface files missing as Waiman found out. Fix it by invoking css_populate_dir() on the root css on subsys registration. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Waiman Long <longman@redhat.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Tejun Heo <tj@kernel.org>
2017-07-17genirq/PM: Properly pretend disabled state when force resuming interruptsJuergen Gross
Interrupts with the IRQF_FORCE_RESUME flag set have also the IRQF_NO_SUSPEND flag set. They are not disabled in the suspend path, but must be forcefully resumed. That's used by XEN to keep IPIs enabled beyond the suspension of device irqs. Force resume works by pretending that the interrupt was disabled and then calling __irq_enable(). Incrementing the disabled depth counter was enough to do that, but with the recent changes which use state flags to avoid unnecessary hardware access, this is not longer sufficient. If the state flags are not set, then the hardware callbacks are not invoked and the interrupt line stays disabled in "hardware". Set the disabled and masked state when pretending that an interrupt got disabled by suspend. Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Cc: boris.ostrovsky@oracle.com Link: http://lkml.kernel.org/r/20170717174703.4603-2-jgross@suse.com
2017-07-17Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "Fix the fallout from reworking the locking and resource management in request/free_irq()" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Keep chip buslock across irq_request/release_resources()
2017-07-17Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP fix from Thomas Gleixner: "Replace the bogus BUG_ON in the cpu hotplug code" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp/hotplug: Replace BUG_ON and react useful
2017-07-15Merge branch 'work.mount' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull ->s_options removal from Al Viro: "Preparations for fsmount/fsopen stuff (coming next cycle). Everything gets moved to explicit ->show_options(), killing ->s_options off + some cosmetic bits around fs/namespace.c and friends. Basically, the stuff needed to work with fsmount series with minimum of conflicts with other work. It's not strictly required for this merge window, but it would reduce the PITA during the coming cycle, so it would be nice to have those bits and pieces out of the way" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: isofs: Fix isofs_show_options() VFS: Kill off s_options and helpers orangefs: Implement show_options 9p: Implement show_options isofs: Implement show_options afs: Implement show_options affs: Implement show_options befs: Implement show_options spufs: Implement show_options bpf: Implement show_options ramfs: Implement show_options pstore: Implement show_options omfs: Implement show_options hugetlbfs: Implement show_options VFS: Don't use save/replace_mount_options if not using generic_show_options VFS: Provide empty name qstr VFS: Make get_filesystem() return the affected filesystem VFS: Clean up whitespace in fs/namespace.c and fs/super.c Provide a function to create a NUL-terminated string from unterminated data
2017-07-14Merge tag 'pm-fixes-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a recently exposed issue in the PCI device wakeup code and one older problem related to PCI device wakeup that has been reported recently, modify one more piece of computations in intel_pstate to get rid of a rounding error, fix a possible race in the schedutil cpufreq governor, fix the device PM QoS sysfs interface to correctly handle invalid user input, fix return values of two probe routines in devfreq drivers and constify an attribute_group structure in devfreq. Specifics: - Avoid clearing the PCI PME Enable bit for devices as a result of config space restoration which confuses AML executed afterward and causes wakeup events to be lost on some systems (Rafael Wysocki). - Fix the native PCIe PME interrupts handling in the cases when the PME IRQ is set up as a system wakeup one so that runtime PM remote wakeup works as expected after system resume on systems where that happens (Rafael Wysocki). - Fix the device PM QoS sysfs interface to handle invalid user input correctly instead of using an unititialized variable value as the latency tolerance for the device at hand (Dan Carpenter). - Get rid of one more rounding error from intel_pstate computations (Srinivas Pandruvada). - Fix the schedutil cpufreq governor to prevent it from possibly accessing unititialized data structures from governor callbacks in some cases on systems when multiple CPUs share a single cpufreq policy object (Vikram Mulukutla). - Fix the return values of probe routines in two devfreq drivers (Gustavo Silva). - Constify an attribute_group structure in devfreq (Arvind Yadav)" * tag 'pm-fixes-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PCI / PM: Fix native PME handling during system suspend/resume PCI / PM: Restore PME Enable after config space restoration cpufreq: schedutil: Fix sugov_start() versus sugov_update_shared() race PM / QoS: return -EINVAL for bogus strings cpufreq: intel_pstate: Fix ratio setting for min_perf_pct PM / devfreq: constify attribute_group structures. PM / devfreq: tegra: fix error return code in tegra_devfreq_probe() PM / devfreq: rk3399_dmc: fix error return code in rk3399_dmcfreq_probe()
2017-07-14kmod: throttle kmod thread limitLuis R. Rodriguez
If we reach the limit of modprobe_limit threads running the next request_module() call will fail. The original reason for adding a kill was to do away with possible issues with in old circumstances which would create a recursive series of request_module() calls. We can do better than just be super aggressive and reject calls once we've reached the limit by simply making pending callers wait until the threshold has been reduced, and then throttling them in, one by one. This throttling enables requests over the kmod concurrent limit to be processed once a pending request completes. Only the first item queued up to wait is woken up. The assumption here is once a task is woken it will have no other option to also kick the queue to check if there are more pending tasks -- regardless of whether or not it was successful. By throttling and processing only max kmod concurrent tasks we ensure we avoid unexpected fatal request_module() calls, and we keep memory consumption on module loading to a minimum. With x86_64 qemu, with 4 cores, 4 GiB of RAM it takes the following run time to run both tests: time ./kmod.sh -t 0008 real 0m16.366s user 0m0.883s sys 0m8.916s time ./kmod.sh -t 0009 real 0m50.803s user 0m0.791s sys 0m9.852s Link: http://lkml.kernel.org/r/20170628223155.26472-4-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14kernel/watchdog.c: use better pr_fmt prefixKefeng Wang
After commit 73ce0511c436 ("kernel/watchdog.c: move hardlockup detector to separate file"), 'NMI watchdog' is inappropriate in kernel/watchdog.c, using 'watchdog' only. Link: http://lkml.kernel.org/r/1499928642-48983-1-git-send-email-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Babu Moger <babu.moger@oracle.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14Merge branches 'pm-cpufreq-sched' and 'intel_pstate'Rafael J. Wysocki
* pm-cpufreq-sched: cpufreq: schedutil: Fix sugov_start() versus sugov_update_shared() race * intel_pstate: cpufreq: intel_pstate: Fix ratio setting for min_perf_pct
2017-07-14sched/deadline: Fix confusing comments about selection of top pi-waiterJoel Fernandes
This comment in the code is incomplete, and I believe it begs a definition of dl_boosted to make sense of the condition that follows. Rewrite the comment and also rearrange the condition that follows to reflect the first condition "we have a top pi-waiter which is a SCHED_DEADLINE task" in that order. Also fix a typo that follows. Signed-off-by: Joel Fernandes <joelaf@google.com> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by: Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170713022429.10307-1-joelaf@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-14sched/cputime: Don't use smp_processor_id() in preemptible contextWanpeng Li
Recent kernels trigger this warning: BUG: using smp_processor_id() in preemptible [00000000] code: 99-trinity/181 caller is debug_smp_processor_id+0x17/0x19 CPU: 0 PID: 181 Comm: 99-trinity Not tainted 4.12.0-01059-g2a42eb9 #1 Call Trace: dump_stack+0x82/0xb8 check_preemption_disabled() debug_smp_processor_id() vtime_delta() task_cputime() thread_group_cputime() thread_group_cputime_adjusted() wait_consider_task() do_wait() SYSC_wait4() do_syscall_64() entry_SYSCALL64_slow_path() As Frederic pointed out: | Although those sched_clock_cpu() things seem to only matter when the | sched_clock() is unstable. And that stability is a condition for nohz_full | to work anyway. So probably sched_clock() alone would be enough. This patch fixes it by replacing sched_clock_cpu() with sched_clock() to avoid calling smp_processor_id() in a preemptible context. Reported-by: Xiaolong Ye <xiaolong.ye@intel.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1499586028-7402-1-git-send-email-wanpeng.li@hotmail.com [ Prettified the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-13Merge tag 'trace-v4.13-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing updates from Steven Rostedt: "A few more minor updates: - Show the tgid mappings for user space trace tools to use - Fix and optimize the comm and tgid cache recording - Sanitize derived kprobe names - Ftrace selftest updates - trace file header fix - Update of Documentation/trace/ftrace.txt - Compiler warning fixes - Fix possible uninitialized variable" * tag 'trace-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix uninitialized variable in match_records() ftrace: Remove an unneeded NULL check ftrace: Hide cached module code for !CONFIG_MODULES tracing: Do note expose stack_trace_filter without DYNAMIC_FTRACE tracing: Update Documentation/trace/ftrace.txt tracing: Fixup trace file header alignment selftests/ftrace: Add a testcase for kprobe event naming selftests/ftrace: Add a test to probe module functions selftests/ftrace: Update multiple kprobes test for powerpc trace/kprobes: Sanitize derived event names tracing: Attempt to record other information even if some fail tracing: Treat recording tgid for idle task as a success tracing: Treat recording comm for idle task as a success tracing: Add saved_tgids file to show cached pid to tgid mappings
2017-07-13Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge yet more updates from Andrew Morton: - various misc things - kexec updates - sysctl core updates - scripts/gdb udpates - checkpoint-restart updates - ipc updates - kernel/watchdog updates - Kees's "rough equivalent to the glibc _FORTIFY_SOURCE=1 feature" - "stackprotector: ascii armor the stack canary" - more MM bits - checkpatch updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits) writeback: rework wb_[dec|inc]_stat family of functions ARM: samsung: usb-ohci: move inline before return type video: fbdev: omap: move inline before return type video: fbdev: intelfb: move inline before return type USB: serial: safe_serial: move __inline__ before return type drivers: tty: serial: move inline before return type drivers: s390: move static and inline before return type x86/efi: move asmlinkage before return type sh: move inline before return type MIPS: SMP: move asmlinkage before return type m68k: coldfire: move inline before return type ia64: sn: pci: move inline before type ia64: move inline before return type FRV: tlbflush: move asmlinkage before return type CRIS: gpio: move inline before return type ARM: HP Jornada 7XX: move inline before return type ARM: KVM: move asmlinkage before type checkpatch: improve the STORAGE_CLASS test mm, migration: do not trigger OOM killer when migrating memory drm/i915: use __GFP_RETRY_MAYFAIL ...
2017-07-13locking/rtmutex: Remove unnecessary priority adjustmentAlex Shi
We don't need to adjust priority before adding a new pi_waiter, the priority only needs to be updated after pi_waiter change or task priority change. Steven Rostedt pointed out: "Interesting, I did some git mining and this was added with the original entry of the rtmutex.c (23f78d4a03c5). Looking at even that version, I don't see the purpose of adjusting the task prio here. It is done before anything changes in the task." Signed-off-by: Alex Shi <alex.shi@linaro.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1499926704-28841-1-git-send-email-alex.shi@linaro.org [ Enhance the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-12Merge tag 'modules-for-v4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules updates from Jessica Yu: "Summary of modules changes for the 4.13 merge window: - Minor code cleanups - Avoid accessing mod struct prior to checking module struct version, from Kees - Fix racy atomic inc/dec logic of kmod_concurrent_max in kmod, from Luis" * tag 'modules-for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: make the modinfo name const kmod: reduce atomic operations on kmod_concurrent and simplify module: use list_for_each_entry_rcu() on find_module_all() kernel/module.c: suppress warning about unused nowarn variable module: Add module name to modinfo module: Pass struct load_info into symbol checks
2017-07-12fork,random: use get_random_canary() to set tsk->stack_canaryRik van Riel
Use the ascii-armor canary to prevent unterminated C string overflows from being able to successfully overwrite the canary, even if they somehow obtain the canary value. Inspired by execshield ascii-armor and Daniel Micay's linux-hardened tree. Link: http://lkml.kernel.org/r/20170524155751.424-3-riel@redhat.com Signed-off-by: Rik van Riel <riel@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Daniel Micay <danielmicay@gmail.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12kexec_file: adjust declaration of kexec_purgatoryKees Cook
Defining kexec_purgatory as a zero-length char array upsets compile time size checking. Since this is built on a per-arch basis, define it as an unsized char array (like is done for other similar things, e.g. linker sections). This silences the warning generated by the future CONFIG_FORTIFY_SOURCE, which did not like the memcmp() of a "0 byte" array. This drops the __weak and uses an extern instead, since both users define kexec_purgatory. Link: http://lkml.kernel.org/r/1497903987-21002-4-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>