summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2017-10-06Merge branch 'core-watchdog-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull watchddog clean-up and fixes from Thomas Gleixner: "The watchdog (hard/softlockup detector) code is pretty much broken in its current state. The patch series addresses this by removing all duct tape and refactoring it into a workable state. The reasons why I ask for inclusion that late in the cycle are: 1) The code causes lockdep splats vs. hotplug locking which get reported over and over. Unfortunately there is no easy fix. 2) The risk of breakage is minimal because it's already broken 3) As 4.14 is a long term stable kernel, I prefer to have working watchdog code in that and the lockdep issues resolved. I wouldn't ask you to pull if 4.14 wouldn't be a LTS kernel or if the solution would be easy to backport. 4) The series was around before the merge window opened, but then got delayed due to the UP failure caused by the for_each_cpu() surprise which we discussed recently. Changes vs. V1: - Addressed your review points - Addressed the warning in the powerpc code which was discovered late - Changed two function names which made sense up to a certain point in the series. Now they match what they do in the end. - Fixed a 'unused variable' warning, which got not detected by the intel robot. I triggered it when trying all possible related config combinations manually. Randconfig testing seems not random enough. The changes have been tested by and reviewed by Don Zickus and tested and acked by Micheal Ellerman for powerpc" * 'core-watchdog-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) watchdog/core: Put softlockup_threads_initialized under ifdef guard watchdog/core: Rename some softlockup_* functions powerpc/watchdog: Make use of watchdog_nmi_probe() watchdog/core, powerpc: Lock cpus across reconfiguration watchdog/core, powerpc: Replace watchdog_nmi_reconfigure() watchdog/hardlockup/perf: Fix spelling mistake: "permanetely" -> "permanently" watchdog/hardlockup/perf: Cure UP damage watchdog/hardlockup: Clean up hotplug locking mess watchdog/hardlockup/perf: Simplify deferred event destroy watchdog/hardlockup/perf: Use new perf CPU enable mechanism watchdog/hardlockup/perf: Implement CPU enable replacement watchdog/hardlockup/perf: Implement init time detection of perf watchdog/hardlockup/perf: Implement init time perf validation watchdog/core: Get rid of the racy update loop watchdog/core, powerpc: Make watchdog_nmi_reconfigure() two stage watchdog/sysctl: Clean up sysctl variable name space watchdog/sysctl: Get rid of the #ifdeffery watchdog/core: Clean up header mess watchdog/core: Further simplify sysctl handling watchdog/core: Get rid of the thread teardown/setup dance ...
2017-10-05Merge tag 'pm-4.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "This fixes a code ordering issue in the main suspend-to-idle loop that causes some "low power S0 idle" conditions to be incorrectly reported as unmet with suspend/resume debug messages enabled" * tag 'pm-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / s2idle: Invoke the ->wake() platform callback earlier
2017-10-06Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: PM / s2idle: Invoke the ->wake() platform callback earlier
2017-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Check iwlwifi 9000 reorder buffer out-of-space condition properly, from Sara Sharon. 2) Fix RCU splat in qualcomm rmnet driver, from Subash Abhinov Kasiviswanathan. 3) Fix session and tunnel release races in l2tp, from Guillaume Nault and Sabrina Dubroca. 4) Fix endian bug in sctp_diag_dump(), from Dan Carpenter. 5) Several mlx5 driver fixes from the Mellanox folks (max flow counters cap check, invalid memory access in IPoIB support, etc.) 6) tun_get_user() should bail if skb->len is zero, from Alexander Potapenko. 7) Fix RCU lookups in inetpeer, from Eric Dumazet. 8) Fix locking in packet_do_bund(). 9) Handle cb->start() error properly in netlink dump code, from Jason A. Donenfeld. 10) Handle multicast properly in UDP socket early demux code. From Paolo Abeni. 11) Several erspan bug fixes in ip_gre, from Xin Long. 12) Fix use-after-free in socket filter code, in order to handle the fact that listener lock is no longer taken during the three-way TCP handshake. From Eric Dumazet. 13) Fix infoleak in RTM_GETSTATS, from Nikolay Aleksandrov. 14) Fix tail call generation in x86-64 BPF JIT, from Alexei Starovoitov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits) net: 8021q: skip packets if the vlan is down bpf: fix bpf_tail_call() x64 JIT net: stmmac: dwmac-rk: Add RK3128 GMAC support rndis_host: support Novatel Verizon USB730L net: rtnetlink: fix info leak in RTM_GETSTATS call socket, bpf: fix possible use after free mlxsw: spectrum_router: Track RIF of IPIP next hops mlxsw: spectrum_router: Move VRF refcounting net: hns3: Fix an error handling path in 'hclge_rss_init_hw()' net: mvpp2: Fix clock resource by adding an optional bus clock r8152: add Linksys USB3GIGV1 id l2tp: fix l2tp_eth module loading ip_gre: erspan device should keep dst ip_gre: set tunnel hlen properly in erspan_tunnel_init ip_gre: check packet length and mtu correctly in erspan_xmit ip_gre: get key from session_id correctly in erspan_rcv tipc: use only positive error codes in messages ppp: fix __percpu annotation udp: perform source validation for mcast early demux IPv4: early demux can return an error code ...
2017-10-04Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "A lot of stuff, sorry about that. A week on a beach, then a bunch of time catching up then more time letting it bake in -next. Shan't do that again!" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (51 commits) include/linux/fs.h: fix comment about struct address_space checkpatch: fix ignoring cover-letter logic m32r: fix build failure lib/ratelimit.c: use deferred printk() version kernel/params.c: improve STANDARD_PARAM_DEF readability kernel/params.c: fix an overflow in param_attr_show kernel/params.c: fix the maximum length in param_get_string mm/memory_hotplug: define find_{smallest|biggest}_section_pfn as unsigned long mm/memory_hotplug: change pfn_to_section_nr/section_nr_to_pfn macro to inline function kernel/kcmp.c: drop branch leftover typo memremap: add scheduling point to devm_memremap_pages mm, page_alloc: add scheduling point to memmap_init_zone mm, memory_hotplug: add scheduling point to __add_pages lib/idr.c: fix comment for idr_replace() mm: memcontrol: use vmalloc fallback for large kmem memcg arrays kernel/sysctl.c: remove duplicate UINT_MAX check on do_proc_douintvec_conv() include/linux/bitfield.h: remove 32bit from FIELD_GET comment block lib/lz4: make arrays static const, reduces object code size exec: binfmt_misc: kill the onstack iname[BINPRM_BUF_SIZE] array exec: binfmt_misc: fix race between load_misc_binary() and kill_node() ...
2017-10-04Merge tag 'trace-v4.14-rc1-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixlets from Steven Rostedt: "Two updates: - A memory fix with left over code from spliting out ftrace_ops and function graph tracer, where the function graph tracer could reset the trampoline pointer, leaving the old trampoline not to be freed (memory leak). - The update to Paul's patch that added the unnecessary READ_ONCE(). This removes the unnecessary READ_ONCE() instead of having to rebase the branch to update the patch that added it" * tag 'trace-v4.14-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: rcu: Remove extraneous READ_ONCE()s from rcu_irq_{enter,exit}() ftrace: Fix kmemleak in unregister_ftrace_graph
2017-10-04watchdog/core: Put softlockup_threads_initialized under ifdef guardThomas Gleixner
The variable is unused when the softlockup detector is disabled in Kconfig. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-10-04watchdog/core: Rename some softlockup_* functionsThomas Gleixner
The function names made sense up to the point where the watchdog (re)configuration was unified to use softlockup_reconfigure_threads() for all configuration purposes. But that includes scenarios which solely configure the nmi watchdog. Rename softlockup_reconfigure_threads() and softlockup_init_threads() so the function names match the functionality. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Don Zickus <dzickus@redhat.com>
2017-10-04powerpc/watchdog: Make use of watchdog_nmi_probe()Thomas Gleixner
The rework of the core hotplug code triggers the WARN_ON in start_wd_cpu() on powerpc because it is called multiple times for the boot CPU. The first call is via: start_wd_on_cpu+0x80/0x2f0 watchdog_nmi_reconfigure+0x124/0x170 softlockup_reconfigure_threads+0x110/0x130 lockup_detector_init+0xbc/0xe0 kernel_init_freeable+0x18c/0x37c kernel_init+0x2c/0x160 ret_from_kernel_thread+0x5c/0xbc And then again via the CPU hotplug registration: start_wd_on_cpu+0x80/0x2f0 cpuhp_invoke_callback+0x194/0x620 cpuhp_thread_fun+0x7c/0x1b0 smpboot_thread_fn+0x290/0x2a0 kthread+0x168/0x1b0 ret_from_kernel_thread+0x5c/0xbc This can be avoided by setting up the cpu hotplug state with nocalls and move the initialization to the watchdog_nmi_probe() function. That initializes the hotplug callbacks without invoking the callback and the following core initialization function then configures the watchdog for the online CPUs (in this case CPU0) via softlockup_reconfigure_threads(). Reported-and-tested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org
2017-10-04watchdog/core, powerpc: Lock cpus across reconfigurationThomas Gleixner
Instead of dropping the cpu hotplug lock after stopping NMI watchdog and threads and reaquiring for restart, the code and the protection rules become more obvious when holding cpu hotplug lock across the full reconfiguration. Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Don Zickus <dzickus@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1710022105570.2114@nanos
2017-10-04watchdog/core, powerpc: Replace watchdog_nmi_reconfigure()Thomas Gleixner
The recent cleanup of the watchdog code split watchdog_nmi_reconfigure() into two stages. One to stop the NMI and one to restart it after reconfiguration. That was done by adding a boolean 'run' argument to the code, which is functionally correct but not necessarily a piece of art. Replace it by two explicit functions: watchdog_nmi_stop() and watchdog_nmi_start(). Fixes: 6592ad2fcc8f ("watchdog/core, powerpc: Make watchdog_nmi_reconfigure() two stage") Requested-by: Linus 'Nursing his pet-peeve' Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Thomas 'Mopping up garbage' Gleixner <tglx@linutronix.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Don Zickus <dzickus@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1710021957480.2114@nanos
2017-10-03kernel/params.c: improve STANDARD_PARAM_DEF readabilityJean Delvare
Align the parameters passed to STANDARD_PARAM_DEF for clarity. Link: http://lkml.kernel.org/r/20170928162728.756143cc@endymion Signed-off-by: Jean Delvare <jdelvare@suse.de> Suggested-by: Ingo Molnar <mingo@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03kernel/params.c: fix an overflow in param_attr_showJean Delvare
Function param_attr_show could overflow the buffer it is operating on. The buffer size is PAGE_SIZE, and the string returned by attribute->param->ops->get is generated by scnprintf(buffer, PAGE_SIZE, ...) so it could be PAGE_SIZE - 1 long, with the terminating '\0' at the very end of the buffer. Calling strcat(..., "\n") on this isn't safe, as the '\0' will be replaced by '\n' (OK) and then another '\0' will be added past the end of the buffer (not OK.) Simply add the trailing '\n' when writing the attribute contents to the buffer originally. This is safe, and also faster. Credits to Teradata for discovering this issue. Link: http://lkml.kernel.org/r/20170928162602.60c379c7@endymion Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03kernel/params.c: fix the maximum length in param_get_stringJean Delvare
The length parameter of strlcpy() is supposed to reflect the size of the target buffer, not of the source string. Harmless in this case as the buffer is PAGE_SIZE long and the source string is always much shorter than this, but conceptually wrong, so let's fix it. Link: http://lkml.kernel.org/r/20170928162515.24846b4f@endymion Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03kernel/kcmp.c: drop branch leftover typoCyrill Gorcunov
The else branch been left over and escaped the source code refresh. Not a problem but better clean it up. Fixes: 0791e3644e5e ("kcmp: add KCMP_EPOLL_TFD mode to compare epoll target files") Link: http://lkml.kernel.org/r/20170917165838.GA1887@uranus.lan Reported-by: Eugene Syromiatnikov <esyr@redhat.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Andrei Vagin <avagin@virtuozzo.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03memremap: add scheduling point to devm_memremap_pagesMichal Hocko
devm_memremap_pages is initializing struct pages in for_each_device_pfn and that can take quite some time. We have even seen a soft lockup triggering on a non preemptive kernel NMI watchdog: BUG: soft lockup - CPU#61 stuck for 22s! [kworker/u641:11:1808] [...] RIP: 0010:[<ffffffff8118b6b7>] [<ffffffff8118b6b7>] devm_memremap_pages+0x327/0x430 [...] Call Trace: pmem_attach_disk+0x2fd/0x3f0 [nd_pmem] nvdimm_bus_probe+0x64/0x110 [libnvdimm] driver_probe_device+0x1f7/0x420 bus_for_each_drv+0x52/0x80 __device_attach+0xb0/0x130 bus_probe_device+0x87/0xa0 device_add+0x3fc/0x5f0 nd_async_device_register+0xe/0x40 [libnvdimm] async_run_entry_fn+0x43/0x150 process_one_work+0x14e/0x410 worker_thread+0x116/0x490 kthread+0xc7/0xe0 ret_from_fork+0x3f/0x70 fix this by adding cond_resched every 1024 pages. Link: http://lkml.kernel.org/r/20170918121410.24466-4-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Johannes Thumshirn <jthumshirn@suse.de> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03kernel/sysctl.c: remove duplicate UINT_MAX check on do_proc_douintvec_conv()Luis R. Rodriguez
do_proc_douintvec_conv() has two UINT_MAX checks, we can remove one. This has no functional changes other than fixing a compiler warning: kernel/sysctl.c:2190]: (warning) Identical condition '*lvalp>UINT_MAX', second condition is always false Fixes: 4f2fec00afa60 ("sysctl: simplify unsigned int support") Link: http://lkml.kernel.org/r/20170919072918.12066-1-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reported-by: David Binderman <dcb314@hotmail.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03android: binder: drop lru lock in isolate callbackSherry Yang
Drop the global lru lock in isolate callback before calling zap_page_range which calls cond_resched, and re-acquire the global lru lock before returning. Also change return code to LRU_REMOVED_RETRY. Use mmput_async when fail to acquire mmap sem in an atomic context. Fix "BUG: sleeping function called from invalid context" errors when CONFIG_DEBUG_ATOMIC_SLEEP is enabled. Also restore mmput_async, which was initially introduced in commit ec8d7c14ea14 ("mm, oom_reaper: do not mmput synchronously from the oom reaper context"), and was removed in commit 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently"). Link: http://lkml.kernel.org/r/20170914182231.90908-1-sherryy@android.com Fixes: f2517eb76f1f2 ("android: binder: Add global lru shrinker to binder") Signed-off-by: Sherry Yang <sherryy@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reported-by: Kyle Yan <kyan@codeaurora.org> Acked-by: Arve Hjønnevåg <arve@android.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Martijn Coenen <maco@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Riley Andrews <riandrews@android.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hdanton@sina.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hoeun Ryu <hoeun.ryu@gmail.com> Cc: Christopher Lameter <cl@linux.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03kernel/params.c: align add_sysfs_param documentation with codeJean Delvare
This parameter is named kp, so the documentation should use that. Fixes: 9b473de87209 ("param: Fix duplicate module prefixes") Link: http://lkml.kernel.org/r/20170919142656.64aea59e@endymion Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03bpf: fix bpf_tail_call() x64 JITAlexei Starovoitov
- bpf prog_array just like all other types of bpf array accepts 32-bit index. Clarify that in the comment. - fix x64 JIT of bpf_tail_call which was incorrectly loading 8 instead of 4 bytes - tighten corresponding check in the interpreter to stay consistent The JIT bug can be triggered after introduction of BPF_F_NUMA_NODE flag in commit 96eabe7a40aa in 4.14. Before that the map_flags would stay zero and though JIT code is wrong it will check bounds correctly. Hence two fixes tags. All other JITs don't have this problem. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Fixes: 96eabe7a40aa ("bpf: Allow selecting numa node during map creation") Fixes: b52f00e6a715 ("x86: bpf_jit: implement bpf_tail_call() helper") Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03Merge branch 'for-4.14-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "The recent migration code updates assumed that migrations always execute from the top to the bottom once and didn't clean up internal states after each migration round; however, cgroup_transfer_tasks() repeats the inner steps multiple times and the garbage internal states from the previous iteration led to OOPS. Waiman fixed the bug by reinitializing the relevant states at the end of each migration round" * 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Reinit cgroup_taskset structure before cgroup_migrate_execute() returns
2017-10-03rcu: Remove extraneous READ_ONCE()s from rcu_irq_{enter,exit}()Paul E. McKenney
The read of ->dynticks_nmi_nesting in rcu_irq_enter() and rcu_irq_exit() is currently protected with READ_ONCE(). However, this protection is unnecessary because (1) ->dynticks_nmi_nesting is updated only by the current CPU, (2) Although NMI handlers can update this field, they reset it back to its old value before return, and (3) Interrupts are disabled, so nothing else can modify it. The value of ->dynticks_nmi_nesting is thus effectively constant, and so no protection is required. This commit therefore removes the READ_ONCE() protection from these two accesses. Link: http://lkml.kernel.org/r/20170926031902.GA2074@linux.vnet.ibm.com Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-10-03ftrace: Fix kmemleak in unregister_ftrace_graphShu Wang
The trampoline allocated by function tracer was overwriten by function_graph tracer, and caused a memory leak. The save_global_trampoline should have saved the previous trampoline in register_ftrace_graph() and restored it in unregister_ftrace_graph(). But as it is implemented, save_global_trampoline was only used in unregister_ftrace_graph as default value 0, and it overwrote the previous trampoline's value. Causing the previous allocated trampoline to be lost. kmmeleak backtrace: kmemleak_vmalloc+0x77/0xc0 __vmalloc_node_range+0x1b5/0x2c0 module_alloc+0x7c/0xd0 arch_ftrace_update_trampoline+0xb5/0x290 ftrace_startup+0x78/0x210 register_ftrace_function+0x8b/0xd0 function_trace_init+0x4f/0x80 tracing_set_tracer+0xe6/0x170 tracing_set_trace_write+0x90/0xd0 __vfs_write+0x37/0x170 vfs_write+0xb2/0x1b0 SyS_write+0x55/0xc0 do_syscall_64+0x67/0x180 return_from_SYSCALL_64+0x0/0x6a [ Looking further into this, I found that this was left over from when the function and function graph tracers shared the same ftrace_ops. But in commit 5f151b2401 ("ftrace: Fix function_profiler and function tracer together"), the two were separated, and the save_global_trampoline no longer was necessary (and it may have been broken back then too). -- Steven Rostedt ] Link: http://lkml.kernel.org/r/20170912021454.5976-1-shuwang@redhat.com Cc: stable@vger.kernel.org Fixes: 5f151b2401 ("ftrace: Fix function_profiler and function tracer together") Signed-off-by: Shu Wang <shuwang@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-10-01Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp/hotplug fixes from Thomas Gleixner: "This addresses the fallout of the new lockdep mechanism which covers completions in the CPU hotplug code. The lockdep splats are false positives, but there is no way to annotate that reliably. The solution is to split the completions for CPU up and down, which requires some reshuffling of the failure rollback handling as well" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp/hotplug: Hotplug state fail injection smp/hotplug: Differentiate the AP completion between up and down smp/hotplug: Differentiate the AP-work lockdep class between up and down smp/hotplug: Callback vs state-machine consistency smp/hotplug: Rewrite AP state machine core smp/hotplug: Allow external multi-instance rollback smp/hotplug: Add state diagram
2017-10-01Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "The scheduler pull request comes with the following updates: - Prevent a divide by zero issue by validating the input value of sysctl_sched_time_avg - Make task state printing consistent all over the place and have explicit state characters for IDLE and PARKED so they wont be displayed as 'D' state which confuses tools" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/sysctl: Check user input value of sysctl_sched_time_avg sched/debug: Add explicit TASK_PARKED printing sched/debug: Ignore TASK_IDLE for SysRq-W sched/debug: Add explicit TASK_IDLE printing sched/tracing: Use common task-state helpers sched/tracing: Fix trace_sched_switch task-state printing sched/debug: Remove unused variable sched/debug: Convert TASK_state to hex sched/debug: Implement consistent task-state printing
2017-10-01Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: - Prevent a division by zero in the perf aux buffer handling - Sync kernel headers with perf tool headers - Fix a build failure in the syscalltbl code - Make the debug messages of perf report --call-graph work correctly - Make sure that all required perf files are in the MANIFEST for container builds - Fix the atrr.exclude kernel handling so it respects the perf_event_paranoid and the user permissions - Make perf test on s390x work correctly * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/aux: Only update ->aux_wakeup in non-overwrite mode perf test: Fix vmlinux failure on s390x part 2 perf test: Fix vmlinux failure on s390x perf tools: Fix syscalltbl build failure perf report: Fix debug messages with --call-graph option perf evsel: Fix attr.exclude_kernel setting for default cycles:p tools include: Sync kernel ABI headers with tooling headers perf tools: Get all of tools/{arch,include}/ in the MANIFEST
2017-10-01Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Two fixes for locking: - Plug a hole the pi_stat->owner serialization which was changed recently and failed to fixup two usage sites. - Prevent reordering of the rwsem_has_spinner() check vs the decrement of rwsem count in up_write() which causes a missed wakeup" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwsem-xadd: Fix missed wakeup due to reordering of load futex: Fix pi_state->owner serialization
2017-10-01Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: - Add a missing NULL pointer check in free_irq() - Fix a memory leak/memory corruption in the generic irq chip - Add missing rcu annotations for radix tree access - Use ffs instead of fls when extracting data from a chip register in the MIPS GIC irq driver - Fix the unmasking of IPI interrupts in the MIPS GIC driver so they end up at the target CPU and not at CPU0 * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irq/generic-chip: Don't replace domain's name irqdomain: Add __rcu annotations to radix tree accessors irqchip/mips-gic: Use effective affinity to unmask irqchip/mips-gic: Fix shifts to extract register fields genirq: Check __free_irq() return value for NULL
2017-09-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull waitid fix from Al Viro: "Fix infoleak in waitid()" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix infoleak in waitid(2)
2017-09-29fix infoleak in waitid(2)Al Viro
kernel_waitid() can return a PID, an error or 0. rusage is filled in the first case and waitid(2) rusage should've been copied out exactly in that case, *not* whenever kernel_waitid() has not returned an error. Compat variant shares that braino; none of kernel_wait4() callers do, so the below ought to fix it. Reported-and-tested-by: Alexander Potapenko <glider@google.com> Fixes: ce72a16fa705 ("wait4(2)/waitid(2): separate copying rusage to userland") Cc: stable@vger.kernel.org # v4.13 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-29sched/sysctl: Check user input value of sysctl_sched_time_avgEthan Zhao
System will hang if user set sysctl_sched_time_avg to 0: [root@XXX ~]# sysctl kernel.sched_time_avg_ms=0 Stack traceback for pid 0 0xffff883f6406c600 0 0 1 3 R 0xffff883f6406cf50 *swapper/3 ffff883f7ccc3ae8 0000000000000018 ffffffff810c4dd0 0000000000000000 0000000000017800 ffff883f7ccc3d78 0000000000000003 ffff883f7ccc3bf8 ffffffff810c4fc9 ffff883f7ccc3c08 00000000810c5043 ffff883f7ccc3c08 Call Trace: <IRQ> [<ffffffff810c4dd0>] ? update_group_capacity+0x110/0x200 [<ffffffff810c4fc9>] ? update_sd_lb_stats+0x109/0x600 [<ffffffff810c5507>] ? find_busiest_group+0x47/0x530 [<ffffffff810c5b84>] ? load_balance+0x194/0x900 [<ffffffff810ad5ca>] ? update_rq_clock.part.83+0x1a/0xe0 [<ffffffff810c6d42>] ? rebalance_domains+0x152/0x290 [<ffffffff810c6f5c>] ? run_rebalance_domains+0xdc/0x1d0 [<ffffffff8108a75b>] ? __do_softirq+0xfb/0x320 [<ffffffff8108ac85>] ? irq_exit+0x125/0x130 [<ffffffff810b3a17>] ? scheduler_ipi+0x97/0x160 [<ffffffff81052709>] ? smp_reschedule_interrupt+0x29/0x30 [<ffffffff8173a1be>] ? reschedule_interrupt+0x6e/0x80 <EOI> [<ffffffff815bc83c>] ? cpuidle_enter_state+0xcc/0x230 [<ffffffff815bc80c>] ? cpuidle_enter_state+0x9c/0x230 [<ffffffff815bc9d7>] ? cpuidle_enter+0x17/0x20 [<ffffffff810cd6dc>] ? cpu_startup_entry+0x38c/0x420 [<ffffffff81053373>] ? start_secondary+0x173/0x1e0 Because divide-by-zero error happens in function: update_group_capacity() update_cpu_capacity() scale_rt_capacity() { ... total = sched_avg_period() + delta; used = div_u64(avg, total); ... } To fix this issue, check user input value of sysctl_sched_time_avg, keep it unchanged when hitting invalid input, and set the minimum limit of sysctl_sched_time_avg to 1 ms. Reported-by: James Puthukattukaran <james.puthukattukaran@oracle.com> Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: efault@gmx.de Cc: ethan.kernel@gmail.com Cc: keescook@chromium.org Cc: mcgrof@kernel.org Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1504504774-18253-1-git-send-email-ethan.zhao@oracle.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-29sched/debug: Ignore TASK_IDLE for SysRq-WPeter Zijlstra
Markus reported that tasks in TASK_IDLE state are reported by SysRq-W, which results in undesirable clutter. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-29sched/tracing: Use common task-state helpersPeter Zijlstra
Remove yet another task-state char instance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-29locking/rwsem-xadd: Fix missed wakeup due to reordering of loadPrateek Sood
If a spinner is present, there is a chance that the load of rwsem_has_spinner() in rwsem_wake() can be reordered with respect to decrement of rwsem count in __up_write() leading to wakeup being missed: spinning writer up_write caller --------------- ----------------------- [S] osq_unlock() [L] osq spin_lock(wait_lock) sem->count=0xFFFFFFFF00000001 +0xFFFFFFFF00000000 count=sem->count MB sem->count=0xFFFFFFFE00000001 -0xFFFFFFFF00000001 spin_trylock(wait_lock) return rwsem_try_write_lock(count) spin_unlock(wait_lock) schedule() Reordering of atomic_long_sub_return_release() in __up_write() and rwsem_has_spinner() in rwsem_wake() can cause missing of wakeup in up_write() context. In spinning writer, sem->count and local variable count is 0XFFFFFFFE00000001. It would result in rwsem_try_write_lock() failing to acquire rwsem and spinning writer going to sleep in rwsem_down_write_failed(). The smp_rmb() will make sure that the spinner state is consulted after sem->count is updated in up_write context. Signed-off-by: Prateek Sood <prsood@codeaurora.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: longman@redhat.com Cc: parri.andrea@gmail.com Cc: sramana@codeaurora.org Link: http://lkml.kernel.org/r/1504794658-15397-1-git-send-email-prsood@codeaurora.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-29sched/debug: Remove unused variablePeter Zijlstra
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-29perf/aux: Only update ->aux_wakeup in non-overwrite modeAlexander Shishkin
The following commit: d9a50b0256 ("perf/aux: Ensure aux_wakeup represents most recent wakeup index") changed the AUX wakeup position calculation to rounddown(), which causes a division-by-zero in AUX overwrite mode (aka "snapshot mode"). The zero denominator results from the fact that perf record doesn't set aux_watermark to anything, in which case the kernel will set it to half the AUX buffer size, but only for non-overwrite mode. In the overwrite mode aux_watermark stays zero. The good news is that, AUX overwrite mode, wakeups don't happen and related bookkeeping is not relevant, so we can simply forego the whole wakeup updates. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/20170906160811.16510-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-29PM / s2idle: Invoke the ->wake() platform callback earlierRafael J. Wysocki
The role of the ->wake() platform callback for suspend-to-idle is to deal with possible spurious wakeups, among other things. The ACPI implementation of it, acpi_s2idle_wake(), additionally checks the conditions for entering the Low Power S0 Idle state by the platform and reports the ones that have not been met. However, the ->wake() platform callback is invoked after calling dpm_noirq_resume_devices(), which means that the power states of some devices may have changed since s2idle_enter() returned, so some unmet Low Power S0 Idle conditions may be reported incorrectly as a result of that. To avoid these false positives, reorder the invocations of the dpm_noirq_resume_devices() routine and the ->wake() platform callback in s2idle_loop(). Fixes: 726fb6b4f2a8 (ACPI / PM: Check low power idle constraints for debug only) Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-28Merge tag 'seccomp-v4.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp fix from Kees Cook: "Fix refcounting bug in CRIU interface, noticed by Chris Salls (Oleg & Tycho)" * tag 'seccomp-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: fix the usage of get/put_seccomp_filter() in seccomp_get_filter()
2017-09-28watchdog/hardlockup/perf: Fix spelling mistake: "permanetely" -> "permanently"Colin Ian King
Trivial fix to spelling mistake in pr_info message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Don Zickus <dzickus@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Babu Moger <babu.moger@oracle.com> Link: https://lkml.kernel.org/r/20170926093603.7756-1-colin.king@canonical.com
2017-09-28irq/generic-chip: Don't replace domain's nameJeffy Chen
When generic irq chips are allocated for an irq domain the domain name is set to the irq chip name. That was done to have named domains before the recent changes which enforce domain naming were done. Since then the overwrite causes a memory leak when the domain name is dynamically allocated and even worse it would cause the domain free code to free the wrong name pointer, which might point to a constant. Remove the name assignment to prevent this. Fixes: d59f6617eef0 ("genirq: Allow fwnode to carry name information only") Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20170928043731.4764-1-jeffy.chen@rock-chips.com
2017-09-27seccomp: fix the usage of get/put_seccomp_filter() in seccomp_get_filter()Oleg Nesterov
As Chris explains, get_seccomp_filter() and put_seccomp_filter() can end up using different filters. Once we drop ->siglock it is possible for task->seccomp.filter to have been replaced by SECCOMP_FILTER_FLAG_TSYNC. Fixes: f8e529ed941b ("seccomp, ptrace: add support for dumping seccomp filters") Reported-by: Chris Salls <chrissalls5@gmail.com> Cc: stable@vger.kernel.org # needs s/refcount_/atomic_/ for v4.12 and earlier Signed-off-by: Oleg Nesterov <oleg@redhat.com> [tycho: add __get_seccomp_filter vs. open coding refcount_inc()] Signed-off-by: Tycho Andersen <tycho@docker.com> [kees: tweak commit log] Signed-off-by: Kees Cook <keescook@chromium.org>
2017-09-25Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Two sets of NVMe pull requests from Christoph: - Fixes for the Fibre Channel host/target to fix spec compliance - Allow a zero keep alive timeout - Make the debug printk for broken SGLs work better - Fix queue zeroing during initialization - Set of RDMA and FC fixes - Target div-by-zero fix - bsg double-free fix. - ndb unknown ioctl fix from Josef. - Buffered vs O_DIRECT page cache inconsistency fix. Has been floating around for a long time, well reviewed. From Lukas. - brd overflow fix from Mikulas. - Fix for a loop regression in this merge window, where using a union for two members of the loop_cmd turned out to be a really bad idea. From Omar. - Fix for an iostat regression fix in this series, using the wrong API to get at the block queue. From Shaohua. - Fix for a potential blktrace delection deadlock. From Waiman. * 'for-linus' of git://git.kernel.dk/linux-block: (30 commits) nvme-fcloop: fix port deletes and callbacks nvmet-fc: sync header templates with comments nvmet-fc: ensure target queue id within range. nvmet-fc: on port remove call put outside lock nvme-rdma: don't fully stop the controller in error recovery nvme-rdma: give up reconnect if state change fails nvme-core: Use nvme_wq to queue async events and fw activation nvme: fix sqhd reference when admin queue connect fails block: fix a crash caused by wrong API fs: Fix page cache inconsistency when mixing buffered and AIO DIO nvmet: implement valid sqhd values in completions nvme-fabrics: Allow 0 as KATO value nvme: allow timed-out ios to retry nvme: stop aer posting if controller state not live nvme-pci: Print invalid SGL only once nvme-pci: initialize queue memory before interrupts nvmet-fc: fix failing max io queue connections nvme-fc: use transport-specific sgl format nvme: add transport SGL definitions nvme.h: remove FC transport-specific error values ...
2017-09-25Merge tag 'trace-v4.14-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Stack tracing and RCU has been having issues with each other and lockdep has been pointing out constant problems. The changes have been going into the stack tracer, but it has been discovered that the problem isn't with the stack tracer itself, but it is with calling save_stack_trace() from within the internals of RCU. The stack tracer is the one that can trigger the issue the easiest, but examining the problem further, it could also happen from a WARN() in the wrong place, or even if an NMI happened in this area and it did an rcu_read_lock(). The critical area is where RCU is not watching. Which can happen while going to and from idle, or bringing up or taking down a CPU. The final fix was to put the protection in kernel_text_address() as it is the one that requires RCU to be watching while doing the stack trace. To make this work properly, Paul had to allow rcu_irq_enter() happen after rcu_nmi_enter(). This should have been done anyway, since an NMI can page fault (reading vmalloc area), and a page fault triggers rcu_irq_enter(). One patch is just a consolidation of code so that the fix only needed to be done in one location" * tag 'trace-v4.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Remove RCU work arounds from stack tracer extable: Enable RCU if it is not watching in kernel_text_address() extable: Consolidate *kernel_text_address() functions rcu: Allow for page faults in NMI handlers
2017-09-25smp/hotplug: Hotplug state fail injectionPeter Zijlstra
Add a sysfs file to one-time fail a specific state. This can be used to test the state rollback code paths. Something like this (hotplug-up.sh): #!/bin/bash echo 0 > /debug/sched_debug echo 1 > /debug/tracing/events/cpuhp/enable ALL_STATES=`cat /sys/devices/system/cpu/hotplug/states | cut -d':' -f1` STATES=${1:-$ALL_STATES} for state in $STATES do echo 0 > /sys/devices/system/cpu/cpu1/online echo 0 > /debug/tracing/trace echo Fail state: $state echo $state > /sys/devices/system/cpu/cpu1/hotplug/fail cat /sys/devices/system/cpu/cpu1/hotplug/fail echo 1 > /sys/devices/system/cpu/cpu1/online cat /debug/tracing/trace > hotfail-${state}.trace sleep 1 done Can be used to test for all possible rollback (barring multi-instance) scenarios on CPU-up, CPU-down is a trivial modification of the above. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: bigeasy@linutronix.de Cc: efault@gmx.de Cc: rostedt@goodmis.org Cc: max.byungchul.park@gmail.com Link: https://lkml.kernel.org/r/20170920170546.972581715@infradead.org
2017-09-25smp/hotplug: Differentiate the AP completion between up and downPeter Zijlstra
With lockdep-crossrelease we get deadlock reports that span cpu-up and cpu-down chains. Such deadlocks cannot possibly happen because cpu-up and cpu-down are globally serialized. takedown_cpu() irq_lock_sparse() wait_for_completion(&st->done) cpuhp_thread_fun cpuhp_up_callback cpuhp_invoke_callback irq_affinity_online_cpu irq_local_spare() irq_unlock_sparse() complete(&st->done) Now that we have consistent AP state, we can trivially separate the AP completion between up and down using st->bringup. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: max.byungchul.park@gmail.com Cc: bigeasy@linutronix.de Cc: efault@gmx.de Cc: rostedt@goodmis.org Link: https://lkml.kernel.org/r/20170920170546.872472799@infradead.org
2017-09-25smp/hotplug: Differentiate the AP-work lockdep class between up and downPeter Zijlstra
With lockdep-crossrelease we get deadlock reports that span cpu-up and cpu-down chains. Such deadlocks cannot possibly happen because cpu-up and cpu-down are globally serialized. CPU0 CPU1 CPU2 cpuhp_up_callbacks: takedown_cpu: cpuhp_thread_fun: cpuhp_state irq_lock_sparse() irq_lock_sparse() wait_for_completion() cpuhp_state complete() Now that we have consistent AP state, we can trivially separate the AP-work class between up and down using st->bringup. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: max.byungchul.park@gmail.com Cc: bigeasy@linutronix.de Cc: efault@gmx.de Cc: rostedt@goodmis.org Link: https://lkml.kernel.org/r/20170920170546.922524234@infradead.org
2017-09-25smp/hotplug: Callback vs state-machine consistencyPeter Zijlstra
While the generic callback functions have an 'int' return and thus appear to be allowed to return error, this is not true for all states. Specifically, what used to be STARTING/DYING are ran with IRQs disabled from critical parts of CPU bringup/teardown and are not allowed to fail. Add WARNs to enforce this rule. But since some callbacks are indeed allowed to fail, we have the situation where a state-machine rollback encounters a failure, in this case we're stuck, we can't go forward and we can't go back. Also add a WARN for that case. AFAICT this is a fundamental 'problem' with no real obvious solution. We want the 'prepare' callbacks to allow failure on either up or down. Typically on prepare-up this would be things like -ENOMEM from resource allocations, and the typical usage in prepare-down would be something like -EBUSY to avoid CPUs being taken away. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: bigeasy@linutronix.de Cc: efault@gmx.de Cc: rostedt@goodmis.org Cc: max.byungchul.park@gmail.com Link: https://lkml.kernel.org/r/20170920170546.819539119@infradead.org
2017-09-25smp/hotplug: Rewrite AP state machine corePeter Zijlstra
There is currently no explicit state change on rollback. That is, st->bringup, st->rollback and st->target are not consistent when doing the rollback. Rework the AP state handling to be more coherent. This does mean we have to do a second AP kick-and-wait for rollback, but since rollback is the slow path of a slowpath, this really should not matter. Take this opportunity to simplify the AP thread function to only run a single callback per invocation. This unifies the three single/up/down modes is supports. The looping it used to do for up/down are achieved by retaining should_run and relying on the main smpboot_thread_fn() loop. (I have most of a patch that does the same for the BP state handling, but that's not critical and gets a little complicated because CPUHP_BRINGUP_CPU does the AP handoff from a callback, which gets recursive @st usage, I still have de-fugly that.) [ tglx: Move cpuhp_down_callbacks() et al. into the HOTPLUG_CPU section to avoid gcc complaining about unused functions. Make the HOTPLUG_CPU one piece instead of having two consecutive ifdef sections of the same type. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: bigeasy@linutronix.de Cc: efault@gmx.de Cc: rostedt@goodmis.org Cc: max.byungchul.park@gmail.com Link: https://lkml.kernel.org/r/20170920170546.769658088@infradead.org
2017-09-25smp/hotplug: Allow external multi-instance rollbackPeter Zijlstra
Currently the rollback of multi-instance states is handled inside cpuhp_invoke_callback(). The problem is that when we want to allow an explicit state change for rollback, we need to return from the function without doing the rollback. Change cpuhp_invoke_callback() to optionally return the multi-instance state, such that rollback can be done from a subsequent call. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: bigeasy@linutronix.de Cc: efault@gmx.de Cc: rostedt@goodmis.org Cc: max.byungchul.park@gmail.com Link: https://lkml.kernel.org/r/20170920170546.720361181@infradead.org
2017-09-25irqdomain: Add __rcu annotations to radix tree accessorsMasahiro Yamada
Fix various address spaces warning of sparse. kernel/irq/irqdomain.c:1463:14: warning: incorrect type in assignment (different address spaces) kernel/irq/irqdomain.c:1463:14: expected void **slot kernel/irq/irqdomain.c:1463:14: got void [noderef] <asn:4>** kernel/irq/irqdomain.c:1465:66: warning: incorrect type in argument 2 (different address spaces) kernel/irq/irqdomain.c:1465:66: expected void [noderef] <asn:4>**slot kernel/irq/irqdomain.c:1465:66: got void **slot Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: https://lkml.kernel.org/r/1506082841-11530-1-git-send-email-yamada.masahiro@socionext.com