summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2019-07-20Merge tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fixes from Christoph Hellwig: "Fix various regressions: - force unencrypted dma-coherent buffers if encryption bit can't fit into the dma coherent mask (Tom Lendacky) - avoid limiting request size if swiotlb is not used (me) - fix swiotlb handling in dma_direct_sync_sg_for_cpu/device (Fugang Duan)" * tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device dma-direct: only limit the mapping size if swiotlb could be used dma-mapping: add a dma_addressing_limited helper dma-direct: Force unencrypted DMA under SME for certain DMA masks
2019-07-20Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Thomas Gleixner: - A collection of objtool fixes which address recent fallout partially exposed by newer toolchains, clang, BPF and general code changes. - Force USER_DS for user stack traces [ Note: the "objtool fixes" are not all to objtool itself, but for kernel code that triggers objtool warnings. Things like missing function size annotations, or code that confuses the unwinder etc. - Linus] * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) objtool: Support conditional retpolines objtool: Convert insn type to enum objtool: Fix seg fault on bad switch table entry objtool: Support repeated uses of the same C jump table objtool: Refactor jump table code objtool: Refactor sibling call detection logic objtool: Do frame pointer check before dead end check objtool: Change dead_end_function() to return boolean objtool: Warn on zero-length functions objtool: Refactor function alias logic objtool: Track original function across branches objtool: Add mcsafe_handle_tail() to the uaccess safe list bpf: Disable GCC -fgcse optimization for ___bpf_prog_run() x86/uaccess: Remove redundant CLACs in getuser/putuser error paths x86/uaccess: Don't leak AC flag into fentry from mcsafe_handle_tail() x86/uaccess: Remove ELF function annotation from copy_user_handle_tail() x86/head/64: Annotate start_cpu0() as non-callable x86/entry: Fix thunk function ELF sizes x86/kvm: Don't call kvm_spurious_fault() from .fixup x86/kvm: Replace vmx_vmenter()'s call to kvm_spurious_fault() with UD2 ...
2019-07-20Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp fix from Thomas Gleixner: "Add warnings to the smp function calls so callers from wrong contexts get detected" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp: Warn on function calls from softirq context
2019-07-20Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CONFIG_PREEMPT_RT stub config from Thomas Gleixner: "The real-time preemption patch set exists for almost 15 years now and while the vast majority of infrastructure and enhancements have found their way into the mainline kernel, the final integration of RT is still missing. Over the course of the last few years, we have worked on reducing the intrusivenness of the RT patches by refactoring kernel infrastructure to be more real-time friendly. Almost all of these changes were benefitial to the mainline kernel on their own, so there was no objection to integrate them. Though except for the still ongoing printk refactoring, the remaining changes which are required to make RT a first class mainline citizen are not longer arguable as immediately beneficial for the mainline kernel. Most of them are either reordering code flows or adding RT specific functionality. But this now has hit a wall and turned into a classic hen and egg problem: Maintainers are rightfully wary vs. these changes as they make only sense if the final integration of RT into the mainline kernel takes place. Adding CONFIG_PREEMPT_RT aims to solve this as a clear sign that RT will be fully integrated into the mainline kernel. The final integration of the missing bits and pieces will be of course done with the same careful approach as we have used in the past. While I'm aware that you are not entirely enthusiastic about that, I think that RT should receive the same treatment as any other widely used out of tree functionality, which we have accepted into mainline over the years. RT has become the de-facto standard real-time enhancement and is shipped by enterprise, embedded and community distros. It's in use throughout a wide range of industries: telecommunications, industrial automation, professional audio, medical devices, data acquisition, automotive - just to name a few major use cases. RT development is backed by a Linuxfoundation project which is supported by major stakeholders of this technology. The funding will continue over the actual inclusion into mainline to make sure that the functionality is neither introducing regressions, regressing itself, nor becomes subject to bitrot. There is also a lifely user community around RT as well, so contrary to the grim situation 5 years ago, it's a healthy project. As RT is still a good vehicle to exercise rarely used code paths and to detect hard to trigger issues, you could at least view it as a QA tool if nothing else" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT
2019-07-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull more KVM updates from Paolo Bonzini: "Mostly bugfixes, but also: - s390 support for KVM selftests - LAPIC timer offloading to housekeeping CPUs - Extend an s390 optimization for overcommitted hosts to all architectures - Debugging cleanups and improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits) KVM: x86: Add fixed counters to PMU filter KVM: nVMX: do not use dangling shadow VMCS after guest reset KVM: VMX: dump VMCS on failed entry KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed KVM: s390: Use kvm_vcpu_wake_up in kvm_s390_vcpu_wakeup KVM: Boost vCPUs that are delivering interrupts KVM: selftests: Remove superfluous define from vmx.c KVM: SVM: Fix detection of AMD Errata 1096 KVM: LAPIC: Inject timer interrupt via posted interrupt KVM: LAPIC: Make lapic timer unpinned KVM: x86/vPMU: reset pmc->counter to 0 for pmu fixed_counters KVM: nVMX: Ignore segment base for VMX memory operand when segment not FS or GS kvm: x86: ioapic and apic debug macros cleanup kvm: x86: some tsc debug cleanup kvm: vmx: fix coccinelle warnings x86: kvm: avoid constant-conversion warning x86: kvm: avoid -Wsometimes-uninitized warning KVM: x86: expose AVX512_BF16 feature to guest KVM: selftests: enable pgste option for the linker on s390 KVM: selftests: Move kvm_create_max_vcpus test to generic code ...
2019-07-20smp: Warn on function calls from softirq contextPeter Zijlstra
It's clearly documented that smp function calls cannot be invoked from softirq handling context. Unfortunately nothing enforces that or emits a warning. A single function call can be invoked from softirq context only via smp_call_function_single_async(). The only legit context is task context, so add a warning to that effect. Reported-by: luferry <luferry@163.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190718160601.GP3402@hirez.programming.kicks-ass.net
2019-07-20KVM: LAPIC: Inject timer interrupt via posted interruptWanpeng Li
Dedicated instances are currently disturbed by unnecessary jitter due to the emulated lapic timers firing on the same pCPUs where the vCPUs reside. There is no hardware virtual timer on Intel for guest like ARM, so both programming timer in guest and the emulated timer fires incur vmexits. This patch tries to avoid vmexit when the emulated timer fires, at least in dedicated instance scenario when nohz_full is enabled. In that case, the emulated timers can be offload to the nearest busy housekeeping cpus since APICv has been found for several years in server processors. The guest timer interrupt can then be injected via posted interrupts, which are delivered by the housekeeping cpu once the emulated timer fires. The host should tuned so that vCPUs are placed on isolated physical processors, and with several pCPUs surplus for busy housekeeping. If disabled mwait/hlt/pause vmexits keep the vCPUs in non-root mode, ~3% redis performance benefit can be observed on Skylake server, and the number of external interrupt vmexits drops substantially. Without patch VM-EXIT Samples Samples% Time% Min Time Max Time Avg time EXTERNAL_INTERRUPT 42916 49.43% 39.30% 0.47us 106.09us 0.71us ( +- 1.09% ) While with patch: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time EXTERNAL_INTERRUPT 6871 9.29% 2.96% 0.44us 57.88us 0.72us ( +- 4.02% ) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-19Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - Fix missed wake-up race in padata - Use crypto_memneq in ccp - Fix version check in ccp - Fix fuzz test failure in ccp - Fix potential double free in crypto4xx - Fix compile warning in stm32 * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: padata: use smp_mb in padata_reorder to avoid orphaned padata jobs crypto: ccp - Fix SEV_VERSION_GREATER_OR_EQUAL crypto: ccp/gcm - use const time tag comparison. crypto: ccp - memset structure fields to zero before reuse crypto: crypto4xx - fix a potential double free in ppc4xx_trng_probe crypto: stm32/hash - Fix incorrect printk modifier for size_t
2019-07-19Merge tag 'trace-v5.3-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Eiichi Tsukata found a small bug from the fixup of the stack code Removing ULONG_MAX as the marker for the user stack trace end, made the tracing code not know where the end is. The end is now marked with a zero (NULL) pointer. Eiichi fixed this in the tracing code" * tag 'trace-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix user stack trace "??" output
2019-07-19Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: perf_event_get(): don't bother with fget_raw() vfs: update d_make_root() description
2019-07-19Merge branch 'work.mount0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount updates from Al Viro: "The first part of mount updates. Convert filesystems to use the new mount API" * 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) mnt_init(): call shmem_init() unconditionally constify ksys_mount() string arguments don't bother with registering rootfs init_rootfs(): don't bother with init_ramfs_fs() vfs: Convert smackfs to use the new mount API vfs: Convert selinuxfs to use the new mount API vfs: Convert securityfs to use the new mount API vfs: Convert apparmorfs to use the new mount API vfs: Convert openpromfs to use the new mount API vfs: Convert xenfs to use the new mount API vfs: Convert gadgetfs to use the new mount API vfs: Convert oprofilefs to use the new mount API vfs: Convert ibmasmfs to use the new mount API vfs: Convert qib_fs/ipathfs to use the new mount API vfs: Convert efivarfs to use the new mount API vfs: Convert configfs to use the new mount API vfs: Convert binfmt_misc to use the new mount API convenience helper: get_tree_single() convenience helper get_tree_nodev() vfs: Kill sget_userns() ...
2019-07-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix AF_XDP cq entry leak, from Ilya Maximets. 2) Fix handling of PHY power-down on RTL8411B, from Heiner Kallweit. 3) Add some new PCI IDs to iwlwifi, from Ihab Zhaika. 4) Fix handling of neigh timers wrt. entries added by userspace, from Lorenzo Bianconi. 5) Various cases of missing of_node_put(), from Nishka Dasgupta. 6) The new NET_ACT_CT needs to depend upon NF_NAT, from Yue Haibing. 7) Various RDS layer fixes, from Gerd Rausch. 8) Fix some more fallout from TCQ_F_CAN_BYPASS generalization, from Cong Wang. 9) Fix FIB source validation checks over loopback, also from Cong Wang. 10) Use promisc for unsupported number of filters, from Justin Chen. 11) Missing sibling route unlink on failure in ipv6, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits) tcp: fix tcp_set_congestion_control() use from bpf hook ag71xx: fix return value check in ag71xx_probe() ag71xx: fix error return code in ag71xx_probe() usb: qmi_wwan: add D-Link DWM-222 A2 device ID bnxt_en: Fix VNIC accounting when enabling aRFS on 57500 chips. net: dsa: sja1105: Fix missing unlock on error in sk_buff() gve: replace kfree with kvfree selftests/bpf: fix test_xdp_noinline on s390 selftests/bpf: fix "valid read map access into a read-only array 1" on s390 net/mlx5: Replace kfree with kvfree MAINTAINERS: update netsec driver ipv6: Unlink sibling route in case of failure liquidio: Replace vmalloc + memset with vzalloc udp: Fix typo in net/ipv4/udp.c net: bcmgenet: use promisc for unsupported filters ipv6: rt6_check should return NULL if 'from' is NULL tipc: initialize 'validated' field of received packets selftests: add a test case for rp_filter fib: relax source validation check for loopback packets mlxsw: spectrum: Do not process learned records with a dummy FID ...
2019-07-19Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge yet more updates from Andrew Morton: "The rest of MM and a kernel-wide procfs cleanup. Summary of the more significant patches: - Patch series "mm/memory_hotplug: Factor out memory block devicehandling", v3. David Hildenbrand. Some spring-cleaning of the memory hotplug code, notably in drivers/base/memory.c - "mm: thp: fix false negative of shmem vma's THP eligibility". Yang Shi. Fix /proc/pid/smaps output for THP pages used in shmem. - "resource: fix locking in find_next_iomem_res()" + 1. Nadav Amit. Bugfix and speedup for kernel/resource.c - Patch series "mm: Further memory block device cleanups", David Hildenbrand. More spring-cleaning of the memory hotplug code. - Patch series "mm: Sub-section memory hotplug support". Dan Williams. Generalise the memory hotplug code so that pmem can use it more completely. Then remove the hacks from the libnvdimm code which were there to work around the memory-hotplug code's constraints. - "proc/sysctl: add shared variables for range check", Matteo Croce. We have about 250 instances of int zero; ... .extra1 = &zero, in the tree. This is a tree-wide sweep to make all those private "zero"s and "one"s use global variables. Alas, it isn't practical to make those two global integers const" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (38 commits) proc/sysctl: add shared variables for range check mm: migrate: remove unused mode argument mm/sparsemem: cleanup 'section number' data types libnvdimm/pfn: stop padding pmem namespaces to section alignment libnvdimm/pfn: fix fsdax-mode namespace info-block zero-fields mm/devm_memremap_pages: enable sub-section remap mm: document ZONE_DEVICE memory-model implications mm/sparsemem: support sub-section hotplug mm/sparsemem: prepare for sub-section ranges mm: kill is_dev_zone() helper mm/hotplug: kill is_dev_zone() usage in __remove_pages() mm/sparsemem: convert kmalloc_section_memmap() to populate_section_memmap() mm/hotplug: prepare shrink_{zone, pgdat}_span for sub-section removal mm/sparsemem: add helpers track active portions of a section at boot mm/sparsemem: introduce a SECTION_IS_EARLY flag mm/sparsemem: introduce struct mem_section_usage drivers/base/memory.c: get rid of find_memory_block_hinted() mm/memory_hotplug: move and simplify walk_memory_blocks() mm/memory_hotplug: rename walk_memory_range() and pass start+size instead of pfns mm: make register_mem_sect_under_node() static ...
2019-07-19tracing: Fix user stack trace "??" outputEiichi Tsukata
Commit c5c27a0a5838 ("x86/stacktrace: Remove the pointless ULONG_MAX marker") removes ULONG_MAX marker from user stack trace entries but trace_user_stack_print() still uses the marker and it outputs unnecessary "??". For example: less-1911 [001] d..2 34.758944: <user stack trace> => <00007f16f2295910> => ?? => ?? => ?? => ?? => ?? => ?? => ?? The user stack trace code zeroes the storage before saving the stack, so if the trace is shorter than the maximum number of entries it can terminate the print loop if a zero entry is detected. Link: http://lkml.kernel.org/r/20190630085438.25545-1-devel@etsukata.com Cc: stable@vger.kernel.org Fixes: 4285f2fcef80 ("tracing: Remove the ULONG_MAX stack trace hackery") Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-19dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/deviceFugang Duan
dma_map_sg() may use swiotlb buffer when the kernel command line includes "swiotlb=force" or the dma_addr is out of dev->dma_mask range. After DMA complete the memory moving from device to memory, then user call dma_sync_sg_for_cpu() to sync with DMA buffer, and copy the original virtual buffer to other space. So dma_direct_sync_sg_for_cpu() should use swiotlb physical addr, not the original physical addr from sg_phys(sg). dma_direct_sync_sg_for_device() also has the same issue, correct it as well. Fixes: 55897af63091("dma-direct: merge swiotlb_dma_ops into the dma_direct code") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-18proc/sysctl: add shared variables for range checkMatteo Croce
In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18mm/devm_memremap_pages: enable sub-section remapDan Williams
Teach devm_memremap_pages() about the new sub-section capabilities of arch_{add,remove}_memory(). Effectively, just replace all usage of align_start, align_end, and align_size with res->start, res->end, and resource_size(res). The existing sanity check will still make sure that the two separate remap attempts do not collide within a sub-section (2MB on x86). Link: http://lkml.kernel.org/r/156092355542.979959.10060071713397030576.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [ppc64] Cc: Michal Hocko <mhocko@suse.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18resource: avoid unnecessary lookups in find_next_iomem_res()Nadav Amit
find_next_iomem_res() shows up to be a source for overhead in dax benchmarks. Improve performance by not considering children of the tree if the top level does not match. Since the range of the parents should include the range of the children such check is redundant. Running sysbench on dax (pmem emulation, with write_cache disabled): sysbench fileio --file-total-size=3G --file-test-mode=rndwr \ --file-io-mode=mmap --threads=4 --file-fsync-mode=fdatasync run Provides the following results: events (avg/stddev) ------------------- 5.2-rc3: 1247669.0000/16075.39 w/patch: 1286320.5000/16402.72 (+3%) Link: http://lkml.kernel.org/r/20190613045903.4922-3-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Borislav Petkov <bp@suse.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18resource: fix locking in find_next_iomem_res()Nadav Amit
Since resources can be removed, locking should ensure that the resource is not removed while accessing it. However, find_next_iomem_res() does not hold the lock while copying the data of the resource. Keep holding the lock while the data is copied. While at it, change the return value to a more informative value. It is disregarded by the callers. [akpm@linux-foundation.org: fix find_next_iomem_res() documentation] Link: http://lkml.kernel.org/r/20190613045903.4922-2-namit@vmware.com Fixes: ff3cc952d3f00 ("resource: Add remove_resource interface") Signed-off-by: Nadav Amit <namit@vmware.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RTThomas Gleixner
Add a new entry to the preemption menu which enables the real-time support for the kernel. The choice is only enabled when an architecture supports it. It selects PREEMPT as the RT features depend on it. To achieve that the existing PREEMPT choice is renamed to PREEMPT_LL which select PREEMPT as well. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.ibm.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Clark Williams <williams@redhat.com> Acked-by: Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Daniel Wagner <wagi@monom.org> Acked-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com> Acked-by: Julia Cartwright <julia@ni.com> Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com> Acked-by: Gratian Crisan <gratian.crisan@ni.com> Acked-by: Sebastian Siewior <bigeasy@linutronix.de> Cc: Andrew Morton <akpm@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907172200190.1778@nanos.tec.linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf 2019-07-18 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) verifier precision propagation fix, from Andrii. 2) BTF size fix for typedefs, from Andrii. 3) a bunch of big endian fixes, from Ilya. 4) wide load from bpf_sock_addr fixes, from Stanislav. 5) a bunch of misc fixes from a number of developers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-18Merge tag 'modules-for-v5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: "Summary of modules changes for the 5.3 merge window: - Code fixes and cleanups - Fix bug where set_memory_x() wasn't being called when rodata=n - Fix bug where -EEXIST was being returned for going modules - Allow arches to override module_exit_section()" * tag 'modules-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: modules: fix compile error if don't have strict module rwx ARM: module: recognize unwind exit sections module: allow arch overrides for .exit section names modules: fix BUG when load module with rodata=n kernel/module: Fix mem leak in module_add_modinfo_attrs kernel: module: Use struct_size() helper kernel/module.c: Only return -EEXIST for modules that have finished loading
2019-07-18bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()Josh Poimboeuf
On x86-64, with CONFIG_RETPOLINE=n, GCC's "global common subexpression elimination" optimization results in ___bpf_prog_run()'s jumptable code changing from this: select_insn: jmp *jumptable(, %rax, 8) ... ALU64_ADD_X: ... jmp *jumptable(, %rax, 8) ALU_ADD_X: ... jmp *jumptable(, %rax, 8) to this: select_insn: mov jumptable, %r12 jmp *(%r12, %rax, 8) ... ALU64_ADD_X: ... jmp *(%r12, %rax, 8) ALU_ADD_X: ... jmp *(%r12, %rax, 8) The jumptable address is placed in a register once, at the beginning of the function. The function execution can then go through multiple indirect jumps which rely on that same register value. This has a few issues: 1) Objtool isn't smart enough to be able to track such a register value across multiple recursive indirect jumps through the jump table. 2) With CONFIG_RETPOLINE enabled, this optimization actually results in a small slowdown. I measured a ~4.7% slowdown in the test_bpf "tcpdump port 22" selftest. This slowdown is actually predicted by the GCC manual: Note: When compiling a program using computed gotos, a GCC extension, you may get better run-time performance if you disable the global common subexpression elimination pass by adding -fno-gcse to the command line. So just disable the optimization for this function. Fixes: e55a73251da3 ("bpf: Fix ORC unwinding in non-JIT BPF code") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/30c3ca29ba037afcbd860a8672eef0021addf9fe.1563413318.git.jpoimboe@redhat.com
2019-07-18Merge tag 'trace-v5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The main changes in this release include: - Add user space specific memory reading for kprobes - Allow kprobes to be executed earlier in boot The rest are mostly just various clean ups and small fixes" * tag 'trace-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits) tracing: Make trace_get_fields() global tracing: Let filter_assign_type() detect FILTER_PTR_STRING tracing: Pass type into tracing_generic_entry_update() ftrace/selftest: Test if set_event/ftrace_pid exists before writing ftrace/selftests: Return the skip code when tracing directory not configured in kernel tracing/kprobe: Check registered state using kprobe tracing/probe: Add trace_event_call accesses APIs tracing/probe: Add probe event name and group name accesses APIs tracing/probe: Add trace flag access APIs for trace_probe tracing/probe: Add trace_event_file access APIs for trace_probe tracing/probe: Add trace_event_call register API for trace_probe tracing/probe: Add trace_probe init and free functions tracing/uprobe: Set print format when parsing command tracing/kprobe: Set print format right after parsed command kprobes: Fix to init kprobes in subsys_initcall tracepoint: Use struct_size() in kmalloc() ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS ftrace: Enable trampoline when rec count returns back to one tracing/kprobe: Do not run kprobe boot tests if kprobe_event is on cmdline tracing: Make a separate config for trace event self tests ...
2019-07-18Merge branch 'x86/debug' into core/urgentThomas Gleixner
Pick up the two pending objtool patches as the next round of objtool fixes depend on them.
2019-07-18Merge branch 'for-linus-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "One compiler fix, and a bug-fix in swiotlb_nr_tbl() and swiotlb_max_segment() to check also for no_iotlb_memory" * 'for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: fix phys_addr_t overflow warning swiotlb: Return consistent SWIOTLB segments/nr_tbl swiotlb: Group identical cleanup in swiotlb_cleanup()
2019-07-18stacktrace: Force USER_DS for stack_trace_save_user()Peter Zijlstra
When walking userspace stacks, USER_DS needs to be set, otherwise access_ok() will not function as expected. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Vegard Nossum <vegard.nossum@oracle.com> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Link: https://lkml.kernel.org/r/20190718085754.GM3402@hirez.programming.kicks-ass.net
2019-07-18padata: use smp_mb in padata_reorder to avoid orphaned padata jobsDaniel Jordan
Testing padata with the tcrypt module on a 5.2 kernel... # modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3 # modprobe tcrypt mode=211 sec=1 ...produces this splat: INFO: task modprobe:10075 blocked for more than 120 seconds. Not tainted 5.2.0-base+ #16 modprobe D 0 10075 10064 0x80004080 Call Trace: ? __schedule+0x4dd/0x610 ? ring_buffer_unlock_commit+0x23/0x100 schedule+0x6c/0x90 schedule_timeout+0x3b/0x320 ? trace_buffer_unlock_commit_regs+0x4f/0x1f0 wait_for_common+0x160/0x1a0 ? wake_up_q+0x80/0x80 { crypto_wait_req } # entries in braces added by hand { do_one_aead_op } { test_aead_jiffies } test_aead_speed.constprop.17+0x681/0xf30 [tcrypt] do_test+0x4053/0x6a2b [tcrypt] ? 0xffffffffa00f4000 tcrypt_mod_init+0x50/0x1000 [tcrypt] ... The second modprobe command never finishes because in padata_reorder, CPU0's load of reorder_objects is executed before the unlocking store in spin_unlock_bh(pd->lock), causing CPU0 to miss CPU1's increment: CPU0 CPU1 padata_reorder padata_do_serial LOAD reorder_objects // 0 INC reorder_objects // 1 padata_reorder TRYLOCK pd->lock // failed UNLOCK pd->lock CPU0 deletes the timer before returning from padata_reorder and since no other job is submitted to padata, modprobe waits indefinitely. Add a pair of full barriers to guarantee proper ordering: CPU0 CPU1 padata_reorder padata_do_serial UNLOCK pd->lock smp_mb() LOAD reorder_objects INC reorder_objects smp_mb__after_atomic() padata_reorder TRYLOCK pd->lock smp_mb__after_atomic is needed so the read part of the trylock operation comes after the INC, as Andrea points out. Thanks also to Andrea for help with writing a litmus test. Fixes: 16295bec6398 ("padata: Generic parallelization/serialization interface") Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: <stable@vger.kernel.org> Cc: Andrea Parri <andrea.parri@amarulasolutions.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-arch@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-17Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "VM: - z3fold fixes and enhancements by Henry Burns and Vitaly Wool - more accurate reclaimed slab caches calculations by Yafang Shao - fix MAP_UNINITIALIZED UAPI symbol to not depend on config, by Christoph Hellwig - !CONFIG_MMU fixes by Christoph Hellwig - new novmcoredd parameter to omit device dumps from vmcore, by Kairui Song - new test_meminit module for testing heap and pagealloc initialization, by Alexander Potapenko - ioremap improvements for huge mappings, by Anshuman Khandual - generalize kprobe page fault handling, by Anshuman Khandual - device-dax hotplug fixes and improvements, by Pavel Tatashin - enable synchronous DAX fault on powerpc, by Aneesh Kumar K.V - add pte_devmap() support for arm64, by Robin Murphy - unify locked_vm accounting with a helper, by Daniel Jordan - several misc fixes core/lib: - new typeof_member() macro including some users, by Alexey Dobriyan - make BIT() and GENMASK() available in asm, by Masahiro Yamada - changed LIST_POISON2 on x86_64 to 0xdead000000000122 for better code generation, by Alexey Dobriyan - rbtree code size optimizations, by Michel Lespinasse - convert struct pid count to refcount_t, by Joel Fernandes get_maintainer.pl: - add --no-moderated switch to skip moderated ML's, by Joe Perches misc: - ptrace PTRACE_GET_SYSCALL_INFO interface - coda updates - gdb scripts, various" [ Using merge message suggestion from Vlastimil Babka, with some editing - Linus ] * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits) fs/select.c: use struct_size() in kmalloc() mm: add account_locked_vm utility function arm64: mm: implement pte_devmap support mm: introduce ARCH_HAS_PTE_DEVMAP mm: clean up is_device_*_page() definitions mm/mmap: move common defines to mman-common.h mm: move MAP_SYNC to asm-generic/mman-common.h device-dax: "Hotremove" persistent memory that is used like normal RAM mm/hotplug: make remove_memory() interface usable device-dax: fix memory and resource leak if hotplug fails include/linux/lz4.h: fix spelling and copy-paste errors in documentation ipc/mqueue.c: only perform resource calculation if user valid include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures scripts/gdb: add helpers to find and list devices scripts/gdb: add lx-genpd-summary command drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl kernel/pid.c: convert struct pid count to refcount_t drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining() select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR ...
2019-07-17dma-direct: only limit the mapping size if swiotlb could be usedChristoph Hellwig
Don't just check for a swiotlb buffer, but also if buffering might be required for this particular device. Fixes: 133d624b1cee ("dma: Introduce dma_max_mapping_size()") Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2019-07-16kernel/pid.c: convert struct pid count to refcount_tJoel Fernandes (Google)
struct pid's count is an atomic_t field used as a refcount. Use refcount_t for it which is basically atomic_t but does additional checking to prevent use-after-free bugs. For memory ordering, the only change is with the following: - if ((atomic_read(&pid->count) == 1) || - atomic_dec_and_test(&pid->count)) { + if (refcount_dec_and_test(&pid->count)) { kmem_cache_free(ns->pid_cachep, pid); Here the change is from: Fully ordered --> RELEASE + ACQUIRE (as per refcount-vs-atomic.rst) This ACQUIRE should take care of making sure the free happens after the refcount_dec_and_test(). The above hunk also removes atomic_read() since it is not needed for the code to work and it is unclear how beneficial it is. The removal lets refcount_dec_and_test() check for cases where get_pid() happened before the object was freed. Link: http://lkml.kernel.org/r/20190701183826.191936-1-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: KJ Tsanaktsidis <ktsanaktsidis@zendesk.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16signal: simplify set_user_sigmask/restore_user_sigmaskOleg Nesterov
task->saved_sigmask and ->restore_sigmask are only used in the ret-from- syscall paths. This means that set_user_sigmask() can save ->blocked in ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked was modified. This way the callers do not need 2 sigset_t's passed to set/restore and restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns into the trivial helper which just calls restore_saved_sigmask(). Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David Laight <David.Laight@aculab.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16ptrace: add PTRACE_GET_SYSCALL_INFO requestElvira Khabirova
PTRACE_GET_SYSCALL_INFO is a generic ptrace API that lets ptracer obtain details of the syscall the tracee is blocked in. There are two reasons for a special syscall-related ptrace request. Firstly, with the current ptrace API there are cases when ptracer cannot retrieve necessary information about syscalls. Some examples include: * The notorious int-0x80-from-64-bit-task issue. See [1] for details. In short, if a 64-bit task performs a syscall through int 0x80, its tracer has no reliable means to find out that the syscall was, in fact, a compat syscall, and misidentifies it. * Syscall-enter-stop and syscall-exit-stop look the same for the tracer. Common practice is to keep track of the sequence of ptrace-stops in order not to mix the two syscall-stops up. But it is not as simple as it looks; for example, strace had a (just recently fixed) long-standing bug where attaching strace to a tracee that is performing the execve system call led to the tracer identifying the following syscall-exit-stop as syscall-enter-stop, which messed up all the state tracking. * Since the introduction of commit 84d77d3f06e7 ("ptrace: Don't allow accessing an undumpable mm"), both PTRACE_PEEKDATA and process_vm_readv become unavailable when the process dumpable flag is cleared. On such architectures as ia64 this results in all syscall arguments being unavailable for the tracer. Secondly, ptracers also have to support a lot of arch-specific code for obtaining information about the tracee. For some architectures, this requires a ptrace(PTRACE_PEEKUSER, ...) invocation for every syscall argument and return value. ptrace(2) man page: long ptrace(enum __ptrace_request request, pid_t pid, void *addr, void *data); ... PTRACE_GET_SYSCALL_INFO Retrieve information about the syscall that caused the stop. The information is placed into the buffer pointed by "data" argument, which should be a pointer to a buffer of type "struct ptrace_syscall_info". The "addr" argument contains the size of the buffer pointed to by "data" argument (i.e., sizeof(struct ptrace_syscall_info)). The return value contains the number of bytes available to be written by the kernel. If the size of data to be written by the kernel exceeds the size specified by "addr" argument, the output is truncated. [ldv@altlinux.org: selftests/seccomp/seccomp_bpf: update for PTRACE_GET_SYSCALL_INFO] Link: http://lkml.kernel.org/r/20190708182904.GA12332@altlinux.org Link: http://lkml.kernel.org/r/20190510152842.GF28558@altlinux.org Signed-off-by: Elvira Khabirova <lineprinter@altlinux.org> Co-developed-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: Eugene Syromyatnikov <esyr@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greentime Hu <greentime@andestech.com> Cc: Helge Deller <deller@gmx.de> [parisc] Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: James Hogan <jhogan@kernel.org> Cc: kbuild test robot <lkp@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16kernel: fix typos and some coding style in commentsWeitao Hou
fix lenght to length Link: http://lkml.kernel.org/r/20190521050937.4370-1-houweitaoo@gmail.com Signed-off-by: Weitao Hou <houweitaoo@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16dma-direct: Force unencrypted DMA under SME for certain DMA masksTom Lendacky
If a device doesn't support DMA to a physical address that includes the encryption bit (currently bit 47, so 48-bit DMA), then the DMA must occur to unencrypted memory. SWIOTLB is used to satisfy that requirement if an IOMMU is not active (enabled or configured in passthrough mode). However, commit fafadcd16595 ("swiotlb: don't dip into swiotlb pool for coherent allocations") modified the coherent allocation support in SWIOTLB to use the DMA direct coherent allocation support. When an IOMMU is not active, this resulted in dma_alloc_coherent() failing for devices that didn't support DMA addresses that included the encryption bit. Addressing this requires changes to the force_dma_unencrypted() function in kernel/dma/direct.c. Since the function is now non-trivial and SME/SEV specific, update the DMA direct support to add an arch override for the force_dma_unencrypted() function. The arch override is selected when CONFIG_AMD_MEM_ENCRYPT is set. The arch override function resides in the arch/x86/mm/mem_encrypt.c file and forces unencrypted DMA when either SEV is active or SME is active and the device does not support DMA to physical addresses that include the encryption bit. Fixes: fafadcd16595 ("swiotlb: don't dip into swiotlb pool for coherent allocations") Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> [hch: moved the force_dma_unencrypted declaration to dma-mapping.h, fold the s390 fix from Halil Pasic] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-16Merge tag 'docs/v5.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull rst conversion of docs from Mauro Carvalho Chehab: "As agreed with Jon, I'm sending this big series directly to you, c/c him, as this series required a special care, in order to avoid conflicts with other trees" * tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits) docs: kbuild: fix build with pdf and fix some minor issues docs: block: fix pdf output docs: arm: fix a breakage with pdf output docs: don't use nested tables docs: gpio: add sysfs interface to the admin-guide docs: locking: add it to the main index docs: add some directories to the main documentation index docs: add SPDX tags to new index files docs: add a memory-devices subdir to driver-api docs: phy: place documentation under driver-api docs: serial: move it to the driver-api docs: driver-api: add remaining converted dirs to it docs: driver-api: add xilinx driver API documentation docs: driver-api: add a series of orphaned documents docs: admin-guide: add a series of orphaned documents docs: cgroup-v1: add it to the admin-guide book docs: aoe: add it to the driver-api book docs: add some documentation dirs to the driver-api book docs: driver-model: move it to the driver-api book docs: lp855x-driver.rst: add it to the driver-api book ...
2019-07-16tracing: Make trace_get_fields() globalCong Wang
trace_get_fields() is the only way to read tracepoint fields at run time, as their fields are defined at compile-time with macros. Make this function visible to all users and it will be used by trace event injection code to calculate the size of a tracepoint entry. Link: http://lkml.kernel.org/r/20190525165802.25944-4-xiyou.wangcong@gmail.com Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-16tracing: Let filter_assign_type() detect FILTER_PTR_STRINGCong Wang
filter_assign_type() could detect dynamic string and static string, but not string pointers. Teach filter_assign_type() to detect string pointers, and this will be needed by trace event injection code. BTW, trace event hist uses FILTER_PTR_STRING too. Link: http://lkml.kernel.org/r/20190525165802.25944-3-xiyou.wangcong@gmail.com Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-16tracing: Pass type into tracing_generic_entry_update()Cong Wang
All callers of tracing_generic_entry_update() have to initialize entry->type, so let's just simply move it inside. Link: http://lkml.kernel.org/r/20190525165802.25944-2-xiyou.wangcong@gmail.com Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-16tracing/kprobe: Check registered state using kprobeMasami Hiramatsu
Change registered check only by trace_kprobe and remove TP_FLAG_REGISTERED from trace_probe, since this feature is only used for trace_kprobe. Link: http://lkml.kernel.org/r/155931588704.28323.4952266828256245833.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-16tracing/probe: Add trace_event_call accesses APIsMasami Hiramatsu
Add trace_event_call access APIs for trace_probe. Instead of accessing trace_probe.call directly, use those accesses by trace_probe_event_call() method. This hides the relationship of trace_event_call and trace_probe from trace_kprobe and trace_uprobe. Link: http://lkml.kernel.org/r/155931587711.28323.8335129014686133120.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-16tracing/probe: Add probe event name and group name accesses APIsMasami Hiramatsu
Add trace_probe_name() and trace_probe_group_name() functions for accessing probe name and group name of trace_probe. Link: http://lkml.kernel.org/r/155931586717.28323.8738615064952254761.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-16tracing/probe: Add trace flag access APIs for trace_probeMasami Hiramatsu
Add trace_probe_test/set/clear_flag() functions for accessing trace_probe.flag field. This flags field should not be accessed directly. Link: http://lkml.kernel.org/r/155931585683.28323.314290023236905988.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-16tracing/probe: Add trace_event_file access APIs for trace_probeMasami Hiramatsu
Add trace_event_file access APIs for trace_probe data structure. This simplifies enabling/disabling operations in uprobe and kprobe events so that those don't touch deep inside the trace_probe. This also removing a redundant synchronization when the kprobe event is used from perf, since the perf itself uses tracepoint_synchronize_unregister() after disabling (ftrace- defined) event, thus we don't have to synchronize in that path. Also we don't need to identify local trace_kprobe too anymore. Link: http://lkml.kernel.org/r/155931584587.28323.372301976283354629.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-16tracing/probe: Add trace_event_call register API for trace_probeMasami Hiramatsu
Since trace_event_call is a field of trace_probe, these operations should be done in trace_probe.c. trace_kprobe and trace_uprobe use new functions to register/unregister trace_event_call. Link: http://lkml.kernel.org/r/155931583643.28323.14828411185591538876.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-16tracing/probe: Add trace_probe init and free functionsMasami Hiramatsu
Add common trace_probe init and cleanup function in trace_probe.c, and use it from trace_kprobe.c and trace_uprobe.c Link: http://lkml.kernel.org/r/155931582664.28323.5934870189034740822.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-16tracing/uprobe: Set print format when parsing commandMasami Hiramatsu
Set event call's print format right after parsed command for simplifying (un)register_uprobe_event(). Link: http://lkml.kernel.org/r/155931581659.28323.5404667166417404076.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-16tracing/kprobe: Set print format right after parsed commandMasami Hiramatsu
Set event call's print format right after parsed command for simplifying (un)register_kprobe_event(). Link: http://lkml.kernel.org/r/155931580625.28323.5158822928646225903.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-16kprobes: Fix to init kprobes in subsys_initcallMasami Hiramatsu
Since arm64 kernel initializes breakpoint trap vector in arch_initcall(), initializing kprobe (and run smoke test) in postcore_initcall() causes a kernel panic. To fix this issue, move the kprobe initialization in subsys_initcall() (which is called right afer the arch_initcall). In-kernel kprobe users (ftrace and bpf) are using fs_initcall() which is called after subsys_initcall(), so this shouldn't cause more problem. Link: http://lkml.kernel.org/r/155956708268.12228.10363800793132214198.stgit@devnote2 Link: http://lkml.kernel.org/r/20190709153755.GB10123@lakrids.cambridge.arm.com Reported-by: Anders Roxell <anders.roxell@linaro.org> Fixes: b5f8b32c93b2 ("kprobes: Initialize kprobes at postcore_initcall") Tested-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-16Merge tag 'for-linus-20190715' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd and clone3 fixes from Christian Brauner: "This contains a bugfix for CLONE_PIDFD when used with the legacy clone syscall, two fixes to ensure that syscall numbering and clone3 entrypoint implementations will stay consistent, and an update for the maintainers file: - The addition of clone3 broke CLONE_PIDFD for legacy clone on all architectures that use do_fork() directly instead of calling the clone syscall itself. (Fwiw, cleaning do_fork() up is on my todo.) The reason this happened was that during conversion of _do_fork() to use struct kernel_clone_args we missed that do_fork() is called directly by various architectures. This is fixed by making sure that the pidfd argument in struct kernel_clone_args is correctly initialized with the parent_tidptr argument passed down from do_fork(). Additionally, do_fork() missed a check to make CLONE_PIDFD and CLONE_PARENT_SETTID mutually exclusive just a clone() does. This is now fixed too. - When clone3() was introduced we skipped architectures that require special handling for fork-like syscalls. Their syscall tables did not contain any mention of clone3(). To make sure that Arnd's work to make syscall numbers on all architectures identical (minus alpha) was not for naught we are placing a comment in all syscall tables that do not yet implement clone3(). The comment makes it clear that 435 is reserved for clone3 and should not be used. - Also, this contains a patch to make the clone3() syscall definition in asm-generic/unist.h conditional on __ARCH_WANT_SYS_CLONE3. This lets us catch new architectures that implicitly make use of clone3 without setting __ARCH_WANT_SYS_CLONE3 which is a good indicator that they did not check whether it needs special treatment or not. - Finally, this contains a patch to add me as maintainer for pidfd stuff so people can start blaming me (more)" * tag 'for-linus-20190715' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: MAINTAINERS: add new entry for pidfd api unistd: protect clone3 via __ARCH_WANT_SYS_CLONE3 arch: mark syscall number 435 reserved for clone3 clone: fix CLONE_PIDFD support