summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2021-12-05Merge tag 'timers_urgent_for_v5.16_rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Borislav Petkov: - Prevent a tick storm when a dedicated timekeeper CPU in nohz_full mode runs for prolonged periods with interrupts disabled and ends up programming the next tick in the past, leading to that storm * tag 'timers_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers/nohz: Last resort update jiffies on nohz_full IRQ entry
2021-12-05Merge tag 'sched_urgent_for_v5.16_rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Properly init uclamp_flags of a runqueue, on first enqueuing - Fix preempt= callback return values - Correct utime/stime resource usage reporting on nohz_full to return the proper times instead of shorter ones * tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/uclamp: Fix rq->uclamp_max not set on first enqueue preempt/dynamic: Fix setup_preempt_mode() return value sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_full
2021-12-04sched/uclamp: Fix rq->uclamp_max not set on first enqueueQais Yousef
Commit d81ae8aac85c ("sched/uclamp: Fix initialization of struct uclamp_rq") introduced a bug where uclamp_max of the rq is not reset to match the woken up task's uclamp_max when the rq is idle. The code was relying on rq->uclamp_max initialized to zero, so on first enqueue static inline void uclamp_rq_inc_id(struct rq *rq, struct task_struct *p, enum uclamp_id clamp_id) { ... if (uc_se->value > READ_ONCE(uc_rq->value)) WRITE_ONCE(uc_rq->value, uc_se->value); } was actually resetting it. But since commit d81ae8aac85c changed the default to 1024, this no longer works. And since rq->uclamp_flags is also initialized to 0, neither above code path nor uclamp_idle_reset() update the rq->uclamp_max on first wake up from idle. This is only visible from first wake up(s) until the first dequeue to idle after enabling the static key. And it only matters if the uclamp_max of this task is < 1024 since only then its uclamp_max will be effectively ignored. Fix it by properly initializing rq->uclamp_flags = UCLAMP_FLAG_IDLE to ensure uclamp_idle_reset() is called which then will update the rq uclamp_max value as expected. Fixes: d81ae8aac85c ("sched/uclamp: Fix initialization of struct uclamp_rq") Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lkml.kernel.org/r/20211202112033.1705279-1-qais.yousef@arm.com
2021-12-04preempt/dynamic: Fix setup_preempt_mode() return valueAndrew Halaney
__setup() callbacks expect 1 for success and 0 for failure. Correct the usage here to reflect that. Fixes: 826bfeb37bb4 ("preempt/dynamic: Support dynamic preempt with preempt= boot option") Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20211203233203.133581-1-ahalaney@redhat.com
2021-12-02sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_fullFrederic Weisbecker
getrusage(RUSAGE_THREAD) with nohz_full may return shorter utime/stime than the actual time. task_cputime_adjusted() snapshots utime and stime and then adjust their sum to match the scheduler maintained cputime.sum_exec_runtime. Unfortunately in nohz_full, sum_exec_runtime is only updated once per second in the worst case, causing a discrepancy against utime and stime that can be updated anytime by the reader using vtime. To fix this situation, perform an update of cputime.sum_exec_runtime when the cputime snapshot reports the task as actually running while the tick is disabled. The related overhead is then contained within the relevant situations. Reported-by: Hasegawa Hitomi <hasegawa-hitomi@fujitsu.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Hasegawa Hitomi <hasegawa-hitomi@fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Acked-by: Phil Auld <pauld@redhat.com> Link: https://lore.kernel.org/r/20211026141055.57358-3-frederic@kernel.org
2021-12-02timers/nohz: Last resort update jiffies on nohz_full IRQ entryFrederic Weisbecker
When at least one CPU runs in nohz_full mode, a dedicated timekeeper CPU is guaranteed to stay online and to never stop its tick. Meanwhile on some rare case, the dedicated timekeeper may be running with interrupts disabled for a while, such as in stop_machine. If jiffies stop being updated, a nohz_full CPU may end up endlessly programming the next tick in the past, taking the last jiffies update monotonic timestamp as a stale base, resulting in an tick storm. Here is a scenario where it matters: 0) CPU 0 is the timekeeper and CPU 1 a nohz_full CPU. 1) A stop machine callback is queued to execute somewhere. 2) CPU 0 reaches MULTI_STOP_DISABLE_IRQ while CPU 1 is still in MULTI_STOP_PREPARE. Hence CPU 0 can't do its timekeeping duty. CPU 1 can still take IRQs. 3) CPU 1 receives an IRQ which queues a timer callback one jiffy forward. 4) On IRQ exit, CPU 1 schedules the tick one jiffy forward, taking last_jiffies_update as a base. But last_jiffies_update hasn't been updated for 2 jiffies since the timekeeper has interrupts disabled. 5) clockevents_program_event(), which relies on ktime_get(), observes that the expiration is in the past and therefore programs the min delta event on the clock. 6) The tick fires immediately, goto 3) 7) Tick storm, the nohz_full CPU is drown and takes ages to reach MULTI_STOP_DISABLE_IRQ, which is the only way out of this situation. Solve this with unconditionally updating jiffies if the value is stale on nohz_full IRQ entry. IRQs and other disturbances are expected to be rare enough on nohz_full for the unconditional call to ktime_get() to actually matter. Reported-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20211026141055.57358-2-frederic@kernel.org
2021-12-01kprobes: Limit max data_size of the kretprobe instancesMasami Hiramatsu
The 'kprobe::data_size' is unsigned, thus it can not be negative. But if user sets it enough big number (e.g. (size_t)-8), the result of 'data_size + sizeof(struct kretprobe_instance)' becomes smaller than sizeof(struct kretprobe_instance) or zero. In result, the kretprobe_instance are allocated without enough memory, and kretprobe accesses outside of allocated memory. To avoid this issue, introduce a max limitation of the kretprobe::data_size. 4KB per instance should be OK. Link: https://lkml.kernel.org/r/163836995040.432120.10322772773821182925.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: f47cd9b553aa ("kprobes: kretprobe user entry-handler") Reported-by: zhangyue <zhangyue1@kylinos.cn> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-12-01tracing: Fix a kmemleak false positive in tracing_mapChen Jun
Doing the command: echo 'hist:key=common_pid.execname,common_timestamp' > /sys/kernel/debug/tracing/events/xxx/trigger Triggers many kmemleak reports: unreferenced object 0xffff0000c7ea4980 (size 128): comm "bash", pid 338, jiffies 4294912626 (age 9339.324s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f3469921>] kmem_cache_alloc_trace+0x4c0/0x6f0 [<0000000054ca40c3>] hist_trigger_elt_data_alloc+0x140/0x178 [<00000000633bd154>] tracing_map_init+0x1f8/0x268 [<000000007e814ab9>] event_hist_trigger_func+0xca0/0x1ad0 [<00000000bf8520ed>] trigger_process_regex+0xd4/0x128 [<00000000f549355a>] event_trigger_write+0x7c/0x120 [<00000000b80f898d>] vfs_write+0xc4/0x380 [<00000000823e1055>] ksys_write+0x74/0xf8 [<000000008a9374aa>] __arm64_sys_write+0x24/0x30 [<0000000087124017>] do_el0_svc+0x88/0x1c0 [<00000000efd0dcd1>] el0_svc+0x1c/0x28 [<00000000dbfba9b3>] el0_sync_handler+0x88/0xc0 [<00000000e7399680>] el0_sync+0x148/0x180 unreferenced object 0xffff0000c7ea4980 (size 128): comm "bash", pid 338, jiffies 4294912626 (age 9339.324s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f3469921>] kmem_cache_alloc_trace+0x4c0/0x6f0 [<0000000054ca40c3>] hist_trigger_elt_data_alloc+0x140/0x178 [<00000000633bd154>] tracing_map_init+0x1f8/0x268 [<000000007e814ab9>] event_hist_trigger_func+0xca0/0x1ad0 [<00000000bf8520ed>] trigger_process_regex+0xd4/0x128 [<00000000f549355a>] event_trigger_write+0x7c/0x120 [<00000000b80f898d>] vfs_write+0xc4/0x380 [<00000000823e1055>] ksys_write+0x74/0xf8 [<000000008a9374aa>] __arm64_sys_write+0x24/0x30 [<0000000087124017>] do_el0_svc+0x88/0x1c0 [<00000000efd0dcd1>] el0_svc+0x1c/0x28 [<00000000dbfba9b3>] el0_sync_handler+0x88/0xc0 [<00000000e7399680>] el0_sync+0x148/0x180 The reason is elts->pages[i] is alloced by get_zeroed_page. and kmemleak will not scan the area alloced by get_zeroed_page. The address stored in elts->pages will be regarded as leaked. That is, the elts->pages[i] will have pointers loaded onto it as well, and without telling kmemleak about it, those pointers will look like memory without a reference. To fix this, call kmemleak_alloc to tell kmemleak to scan elts->pages[i] Link: https://lkml.kernel.org/r/20211124140801.87121-1-chenjun102@huawei.com Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-12-01tracing/histograms: String compares should not care about signed valuesSteven Rostedt (VMware)
When comparing two strings for the "onmatch" histogram trigger, fields that are strings use string comparisons, which do not care about being signed or not. Do not fail to match two string fields if one is unsigned char array and the other is a signed char array. Link: https://lore.kernel.org/all/20211129123043.5cfd687a@gandalf.local.home/ Cc: stable@vgerk.kernel.org Cc: Tom Zanussi <zanussi@kernel.org> Cc: Yafang Shao <laoar.shao@gmail.com> Fixes: b05e89ae7cf3b ("tracing: Accept different type for synthetic event fields") Reviewed-by: Masami Hiramatsu <mhiramatsu@kernel.org> Reported-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-11-28Merge tag 'sched-urgent-2021-11-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "A single scheduler fix to ensure that there is no stale KASAN shadow state left on the idle task's stack when a CPU is brought up after it was brought down before" * tag 'sched-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/scs: Reset task stack state in bringup_cpu()
2021-11-28Merge tag 'perf-urgent-2021-11-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Thomas Gleixner: "A single fix for perf to prevent it from sending SIGTRAP to another task from a trace point event as it's not possible to deliver a synchronous signal to a different task from there" * tag 'perf-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Ignore sigtrap for tracepoints destined for other tasks
2021-11-28Merge tag 'locking-urgent-2021-11-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Two regression fixes for reader writer semaphores: - Plug a race in the lock handoff which is caused by inconsistency of the reader and writer path and can lead to corruption of the underlying counter. - down_read_trylock() is suboptimal when the lock is contended and multiple readers trylock concurrently. That's due to the initial value being read non-atomically which results in at least two compare exchange loops. Making the initial readout atomic reduces this significantly. Whith 40 readers by 11% in a benchmark which enforces contention on mmap_sem" * tag 'locking-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwsem: Optimize down_read_trylock() under highly contended case locking/rwsem: Make handoff bit handling more consistent
2021-11-28Merge tag 'trace-v5.16-rc2-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull another tracing fix from Steven Rostedt: "Fix the fix of pid filtering The setting of the pid filtering flag tested the "trace only this pid" case twice, and ignored the "trace everything but this pid" case. The 5.15 kernel does things a little differently due to the new sparse pid mask introduced in 5.16, and as the bug was discovered running the 5.15 kernel, and the first fix was initially done for that kernel, that fix handled both cases (only pid and all but pid), but the forward port to 5.16 created this bug" * tag 'trace-v5.16-rc2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Test the 'Do not trace this pid' case in create event
2021-11-27tracing: Test the 'Do not trace this pid' case in create eventSteven Rostedt (VMware)
When creating a new event (via a module, kprobe, eprobe, etc), the descriptors that are created must add flags for pid filtering if an instance has pid filtering enabled, as the flags are used at the time the event is executed to know if pid filtering should be done or not. The "Only trace this pid" case was added, but a cut and paste error made that case checked twice, instead of checking the "Trace all but this pid" case. Link: https://lore.kernel.org/all/202111280401.qC0z99JB-lkp@intel.com/ Fixes: 6cb206508b62 ("tracing: Check pid filtering when creating events") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-11-27Merge tag 'trace-v5.16-rc2-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Two fixes to event pid filtering: - Make sure newly created events reflect the current state of pid filtering - Take pid filtering into account when recording trigger events. (Also clean up the if statement to be cleaner)" * tag 'trace-v5.16-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix pid filtering when triggers are attached tracing: Check pid filtering when creating events
2021-11-26tracing: Fix pid filtering when triggers are attachedSteven Rostedt (VMware)
If a event is filtered by pid and a trigger that requires processing of the event to happen is a attached to the event, the discard portion does not take the pid filtering into account, and the event will then be recorded when it should not have been. Cc: stable@vger.kernel.org Fixes: 3fdaf80f4a836 ("tracing: Implement event pid filtering") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-11-26Merge tag 'pm-5.16-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These address three issues in the intel_pstate driver and fix two problems related to hibernation. Specifics: - Make intel_pstate work correctly on Ice Lake server systems with out-of-band performance control enabled (Adamos Ttofari). - Fix EPP handling in intel_pstate during CPU offline and online in the active mode (Rafael Wysocki). - Make intel_pstate support ITMT on asymmetric systems with overclocking enabled (Srinivas Pandruvada). - Fix hibernation image saving when using the user space interface based on the snapshot special device file (Evan Green). - Make the hibernation code release the snapshot block device using the same mode that was used when acquiring it (Thomas Zeitlhofer)" * tag 'pm-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: hibernate: Fix snapshot partial write lengths PM: hibernate: use correct mode for swsusp_close() cpufreq: intel_pstate: ITMT support for overclocked system cpufreq: intel_pstate: Fix active mode offline/online EPP handling cpufreq: intel_pstate: Add Ice Lake server to out-of-band IDs
2021-11-26tracing: Check pid filtering when creating eventsSteven Rostedt (VMware)
When pid filtering is activated in an instance, all of the events trace files for that instance has the PID_FILTER flag set. This determines whether or not pid filtering needs to be done on the event, otherwise the event is executed as normal. If pid filtering is enabled when an event is created (via a dynamic event or modules), its flag is not updated to reflect the current state, and the events are not filtered properly. Cc: stable@vger.kernel.org Fixes: 3fdaf80f4a836 ("tracing: Implement event pid filtering") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-11-24PM: hibernate: Fix snapshot partial write lengthsEvan Green
snapshot_write() is inappropriately limiting the amount of data that can be written in cases where a partial page has already been written. For example, one would expect to be able to write 1 byte, then 4095 bytes to the snapshot device, and have both of those complete fully (since now we're aligned to a page again). But what ends up happening is we write 1 byte, then 4094/4095 bytes complete successfully. The reason is that simple_write_to_buffer()'s second argument is the total size of the buffer, not the size of the buffer minus the offset. Since simple_write_to_buffer() accounts for the offset in its implementation, snapshot_write() can just pass the full page size directly down. Signed-off-by: Evan Green <evgreen@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-24PM: hibernate: use correct mode for swsusp_close()Thomas Zeitlhofer
Commit 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()") changed the opening mode of the block device to (FMODE_READ | FMODE_EXCL). In the corresponding calls to swsusp_close(), the mode is still just FMODE_READ which triggers the warning in blkdev_flush_mapping() on resume from hibernate. So, use the mode (FMODE_READ | FMODE_EXCL) also when closing the device. Fixes: 39fbef4b0f77 ("PM: hibernate: Get block device exclusively in swsusp_check()") Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-24sched/scs: Reset task stack state in bringup_cpu()Mark Rutland
To hot unplug a CPU, the idle task on that CPU calls a few layers of C code before finally leaving the kernel. When KASAN is in use, poisoned shadow is left around for each of the active stack frames, and when shadow call stacks are in use. When shadow call stacks (SCS) are in use the task's saved SCS SP is left pointing at an arbitrary point within the task's shadow call stack. When a CPU is offlined than onlined back into the kernel, this stale state can adversely affect execution. Stale KASAN shadow can alias new stackframes and result in bogus KASAN warnings. A stale SCS SP is effectively a memory leak, and prevents a portion of the shadow call stack being used. Across a number of hotplug cycles the idle task's entire shadow call stack can become unusable. We previously fixed the KASAN issue in commit: e1b77c92981a5222 ("sched/kasan: remove stale KASAN poison after hotplug") ... by removing any stale KASAN stack poison immediately prior to onlining a CPU. Subsequently in commit: f1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled") ... the refactoring left the KASAN and SCS cleanup in one-time idle thread initialization code rather than something invoked prior to each CPU being onlined, breaking both as above. We fixed SCS (but not KASAN) in commit: 63acd42c0d4942f7 ("sched/scs: Reset the shadow stack when idle_task_exit") ... but as this runs in the context of the idle task being offlined it's potentially fragile. To fix these consistently and more robustly, reset the SCS SP and KASAN shadow of a CPU's idle task immediately before we online that CPU in bringup_cpu(). This ensures the idle task always has a consistent state when it is running, and removes the need to so so when exiting an idle task. Whenever any thread is created, dup_task_struct() will give the task a stack which is free of KASAN shadow, and initialize the task's SCS SP, so there's no need to specially initialize either for idle thread within init_idle(), as this was only necessary to handle hotplug cycles. I've tested this on arm64 with: * gcc 11.1.0, defconfig +KASAN_INLINE, KASAN_STACK * clang 12.0.0, defconfig +KASAN_INLINE, KASAN_STACK, SHADOW_CALL_STACK ... offlining and onlining CPUS with: | while true; do | for C in /sys/devices/system/cpu/cpu*/online; do | echo 0 > $C; | echo 1 > $C; | done | done Fixes: f1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled") Reported-by: Qian Cai <quic_qiancai@quicinc.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Tested-by: Qian Cai <quic_qiancai@quicinc.com> Link: https://lore.kernel.org/lkml/20211115113310.35693-1-mark.rutland@arm.com/
2021-11-23tracing/uprobe: Fix uprobe_perf_open probes iterationJiri Olsa
Add missing 'tu' variable initialization in the probes loop, otherwise the head 'tu' is used instead of added probes. Link: https://lkml.kernel.org/r/20211123142801.182530-1-jolsa@kernel.org Cc: stable@vger.kernel.org Fixes: 99c9a923e97a ("tracing/uprobe: Fix double perf_event linking on multiprobe uprobe") Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-11-23perf: Ignore sigtrap for tracepoints destined for other tasksMarco Elver
syzbot reported that the warning in perf_sigtrap() fires, saying that the event's task does not match current: | WARNING: CPU: 0 PID: 9090 at kernel/events/core.c:6446 perf_pending_event+0x40d/0x4b0 kernel/events/core.c:6513 | Modules linked in: | CPU: 0 PID: 9090 Comm: syz-executor.1 Not tainted 5.15.0-syzkaller #0 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 | RIP: 0010:perf_sigtrap kernel/events/core.c:6446 [inline] | RIP: 0010:perf_pending_event_disable kernel/events/core.c:6470 [inline] | RIP: 0010:perf_pending_event+0x40d/0x4b0 kernel/events/core.c:6513 | ... | Call Trace: | <IRQ> | irq_work_single+0x106/0x220 kernel/irq_work.c:211 | irq_work_run_list+0x6a/0x90 kernel/irq_work.c:242 | irq_work_run+0x4f/0xd0 kernel/irq_work.c:251 | __sysvec_irq_work+0x95/0x3d0 arch/x86/kernel/irq_work.c:22 | sysvec_irq_work+0x8e/0xc0 arch/x86/kernel/irq_work.c:17 | </IRQ> | <TASK> | asm_sysvec_irq_work+0x12/0x20 arch/x86/include/asm/idtentry.h:664 | RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:152 [inline] | RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70 kernel/locking/spinlock.c:194 | ... | coredump_task_exit kernel/exit.c:371 [inline] | do_exit+0x1865/0x25c0 kernel/exit.c:771 | do_group_exit+0xe7/0x290 kernel/exit.c:929 | get_signal+0x3b0/0x1ce0 kernel/signal.c:2820 | arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:868 | handle_signal_work kernel/entry/common.c:148 [inline] | exit_to_user_mode_loop kernel/entry/common.c:172 [inline] | exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:207 | __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] | syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300 | do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86 | entry_SYSCALL_64_after_hwframe+0x44/0xae On x86 this shouldn't happen, which has arch_irq_work_raise(). The test program sets up a perf event with sigtrap set to fire on the 'sched_wakeup' tracepoint, which fired in ttwu_do_wakeup(). This happened because the 'sched_wakeup' tracepoint also takes a task argument passed on to perf_tp_event(), which is used to deliver the event to that other task. Since we cannot deliver synchronous signals to other tasks, skip an event if perf_tp_event() is targeted at another task and perf_event_attr::sigtrap is set, which will avoid ever entering perf_sigtrap() for such events. Fixes: 97ba62b27867 ("perf: Add support for SIGTRAP on perf events") Reported-by: syzbot+663359e32ce6f1a305ad@syzkaller.appspotmail.com Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/YYpoCOBmC/kJWfmI@elver.google.com
2021-11-23locking/rwsem: Optimize down_read_trylock() under highly contended caseMuchun Song
We found that a process with 10 thousnads threads has been encountered a regression problem from Linux-v4.14 to Linux-v5.4. It is a kind of workload which will concurrently allocate lots of memory in different threads sometimes. In this case, we will see the down_read_trylock() with a high hotspot. Therefore, we suppose that rwsem has a regression at least since Linux-v5.4. In order to easily debug this problem, we write a simply benchmark to create the similar situation lile the following. ```c++ #include <sys/mman.h> #include <sys/time.h> #include <sys/resource.h> #include <sched.h> #include <cstdio> #include <cassert> #include <thread> #include <vector> #include <chrono> volatile int mutex; void trigger(int cpu, char* ptr, std::size_t sz) { cpu_set_t set; CPU_ZERO(&set); CPU_SET(cpu, &set); assert(pthread_setaffinity_np(pthread_self(), sizeof(set), &set) == 0); while (mutex); for (std::size_t i = 0; i < sz; i += 4096) { *ptr = '\0'; ptr += 4096; } } int main(int argc, char* argv[]) { std::size_t sz = 100; if (argc > 1) sz = atoi(argv[1]); auto nproc = std::thread::hardware_concurrency(); std::vector<std::thread> thr; sz <<= 30; auto* ptr = mmap(nullptr, sz, PROT_READ | PROT_WRITE, MAP_ANON | MAP_PRIVATE, -1, 0); assert(ptr != MAP_FAILED); char* cptr = static_cast<char*>(ptr); auto run = sz / nproc; run = (run >> 12) << 12; mutex = 1; for (auto i = 0U; i < nproc; ++i) { thr.emplace_back(std::thread([i, cptr, run]() { trigger(i, cptr, run); })); cptr += run; } rusage usage_start; getrusage(RUSAGE_SELF, &usage_start); auto start = std::chrono::system_clock::now(); mutex = 0; for (auto& t : thr) t.join(); rusage usage_end; getrusage(RUSAGE_SELF, &usage_end); auto end = std::chrono::system_clock::now(); timeval utime; timeval stime; timersub(&usage_end.ru_utime, &usage_start.ru_utime, &utime); timersub(&usage_end.ru_stime, &usage_start.ru_stime, &stime); printf("usr: %ld.%06ld\n", utime.tv_sec, utime.tv_usec); printf("sys: %ld.%06ld\n", stime.tv_sec, stime.tv_usec); printf("real: %lu\n", std::chrono::duration_cast<std::chrono::milliseconds>(end - start).count()); return 0; } ``` The functionality of above program is simply which creates `nproc` threads and each of them are trying to touch memory (trigger page fault) on different CPU. Then we will see the similar profile by `perf top`. 25.55% [kernel] [k] down_read_trylock 14.78% [kernel] [k] handle_mm_fault 13.45% [kernel] [k] up_read 8.61% [kernel] [k] clear_page_erms 3.89% [kernel] [k] __do_page_fault The highest hot instruction, which accounts for about 92%, in down_read_trylock() is cmpxchg like the following. 91.89 │ lock cmpxchg %rdx,(%rdi) Sice the problem is found by migrating from Linux-v4.14 to Linux-v5.4, so we easily found that the commit ddb20d1d3aed ("locking/rwsem: Optimize down_read_trylock()") caused the regression. The reason is that the commit assumes the rwsem is not contended at all. But it is not always true for mmap lock which could be contended with thousands threads. So most threads almost need to run at least 2 times of "cmpxchg" to acquire the lock. The overhead of atomic operation is higher than non-atomic instructions, which caused the regression. By using the above benchmark, the real executing time on a x86-64 system before and after the patch were: Before Patch After Patch # of Threads real real reduced by ------------ ------ ------ ---------- 1 65,373 65,206 ~0.0% 4 15,467 15,378 ~0.5% 40 6,214 5,528 ~11.0% For the uncontended case, the new down_read_trylock() is the same as before. For the contended cases, the new down_read_trylock() is faster than before. The more contended, the more fast. Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Waiman Long <longman@redhat.com> Link: https://lore.kernel.org/r/20211118094455.9068-1-songmuchun@bytedance.com
2021-11-23locking/rwsem: Make handoff bit handling more consistentWaiman Long
There are some inconsistency in the way that the handoff bit is being handled in readers and writers that lead to a race condition. Firstly, when a queue head writer set the handoff bit, it will clear it when the writer is being killed or interrupted on its way out without acquiring the lock. That is not the case for a queue head reader. The handoff bit will simply be inherited by the next waiter. Secondly, in the out_nolock path of rwsem_down_read_slowpath(), both the waiter and handoff bits are cleared if the wait queue becomes empty. For rwsem_down_write_slowpath(), however, the handoff bit is not checked and cleared if the wait queue is empty. This can potentially make the handoff bit set with empty wait queue. Worse, the situation in rwsem_down_write_slowpath() relies on wstate, a variable set outside of the critical section containing the ->count manipulation, this leads to race condition where RWSEM_FLAG_HANDOFF can be double subtracted, corrupting ->count. To make the handoff bit handling more consistent and robust, extract out handoff bit clearing code into the new rwsem_del_waiter() helper function. Also, completely eradicate wstate; always evaluate everything inside the same critical section. The common function will only use atomic_long_andnot() to clear bits when the wait queue is empty to avoid possible race condition. If the first waiter with handoff bit set is killed or interrupted to exit the slowpath without acquiring the lock, the next waiter will inherit the handoff bit. While at it, simplify the trylock for loop in rwsem_down_write_slowpath() to make it easier to read. Fixes: 4f23dbc1e657 ("locking/rwsem: Implement lock handoff to prevent lock starvation") Reported-by: Zhenhua Ma <mazhenhua@xiaomi.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20211116012912.723980-1-longman@redhat.com
2021-11-19Merge tag 'trace-v5.16-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Fix double free in destroy_hist_field - Harden memset() of trace_iterator structure - Do not warn in trace printk check when test buffer fills up * tag 'trace-v5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Don't use out-of-sync va_list in event printing tracing: Use memset_startat() to zero struct trace_iterator tracing/histogram: Fix UAF in destroy_hist_field()
2021-11-19Merge branch 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull exit-vs-signal handling fixes from Eric Biederman: "This is a small set of changes where debuggers were no longer able to intercept synchronous SIGTRAP and SIGSEGV, introduced by the exit cleanups. This is essentially the change you suggested with all of i's dotted and the t's crossed so that ptrace can intercept all of the cases it has been able to intercept the past, and all of the cases that made it to exit without giving ptrace a chance still don't give ptrace a chance" * 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Replace force_fatal_sig with force_exit_sig when in doubt signal: Don't always set SA_IMMUTABLE for forced signals
2021-11-19signal: Replace force_fatal_sig with force_exit_sig when in doubtEric W. Biederman
Recently to prevent issues with SECCOMP_RET_KILL and similar signals being changed before they are delivered SA_IMMUTABLE was added. Unfortunately this broke debuggers[1][2] which reasonably expect to be able to trap synchronous SIGTRAP and SIGSEGV even when the target process is not configured to handle those signals. Add force_exit_sig and use it instead of force_fatal_sig where historically the code has directly called do_exit. This has the implementation benefits of going through the signal exit path (including generating core dumps) without the danger of allowing userspace to ignore or change these signals. This avoids userspace regressions as older kernels exited with do_exit which debuggers also can not intercept. In the future is should be possible to improve the quality of implementation of the kernel by changing some of these force_exit_sig calls to force_fatal_sig. That can be done where it matters on a case-by-case basis with careful analysis. Reported-by: Kyle Huey <me@kylehuey.com> Reported-by: kernel test robot <oliver.sang@intel.com> [1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com [2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Fixes: a3616a3c0272 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die") Fixes: 83a1f27ad773 ("signal/powerpc: On swapcontext failure force SIGSEGV") Fixes: 9bc508cf0791 ("signal/s390: Use force_sigsegv in default_trap_handler") Fixes: 086ec444f866 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig") Fixes: c317d306d550 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails") Fixes: 695dd0d634df ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit") Fixes: 1fbd60df8a85 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.") Fixes: 941edc5bf174 ("exit/syscall_user_dispatch: Send ordinary signals on failure") Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Kyle Huey <khuey@kylehuey.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-11-19signal: Don't always set SA_IMMUTABLE for forced signalsEric W. Biederman
Recently to prevent issues with SECCOMP_RET_KILL and similar signals being changed before they are delivered SA_IMMUTABLE was added. Unfortunately this broke debuggers[1][2] which reasonably expect to be able to trap synchronous SIGTRAP and SIGSEGV even when the target process is not configured to handle those signals. Update force_sig_to_task to support both the case when we can allow the debugger to intercept and possibly ignore the signal and the case when it is not safe to let userspace know about the signal until the process has exited. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Kyle Huey <me@kylehuey.com> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: stable@vger.kernel.org [1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com [2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Link: https://lkml.kernel.org/r/877dd5qfw5.fsf_-_@email.froward.int.ebiederm.org Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Kyle Huey <khuey@kylehuey.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-11-18tracing: Don't use out-of-sync va_list in event printingNikita Yushchenko
If trace_seq becomes full, trace_seq_vprintf() no longer consumes arguments from va_list, making va_list out of sync with format processing by trace_check_vprintf(). This causes va_arg() in trace_check_vprintf() to return wrong positional argument, which results into a WARN_ON_ONCE() hit. ftrace_stress_test from LTP triggers this situation. Fix it by explicitly avoiding further use if va_list at the point when it's consistency can no longer be guaranteed. Link: https://lkml.kernel.org/r/20211118145516.13219-1-nikita.yushchenko@virtuozzo.com Signed-off-by: Nikita Yushchenko <nikita.yushchenko@virtuozzo.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-11-18tracing: Use memset_startat() to zero struct trace_iteratorKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring fields. Use memset_startat() to avoid confusing memset() about writing beyond the target struct member. Link: https://lkml.kernel.org/r/20211118202217.1285588-1-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-11-18Merge tag 'net-5.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, mac80211. Current release - regressions: - devlink: don't throw an error if flash notification sent before devlink visible - page_pool: Revert "page_pool: disable dma mapping support...", turns out there are active arches who need it Current release - new code bugs: - amt: cancel delayed_work synchronously in amt_fini() Previous releases - regressions: - xsk: fix crash on double free in buffer pool - bpf: fix inner map state pruning regression causing program rejections - mac80211: drop check for DONT_REORDER in __ieee80211_select_queue, preventing mis-selecting the best effort queue - mac80211: do not access the IV when it was stripped - mac80211: fix radiotap header generation, off-by-one - nl80211: fix getting radio statistics in survey dump - e100: fix device suspend/resume Previous releases - always broken: - tcp: fix uninitialized access in skb frags array for Rx 0cp - bpf: fix toctou on read-only map's constant scalar tracking - bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs - tipc: only accept encrypted MSG_CRYPTO msgs - smc: transfer remaining wait queue entries during fallback, fix missing wake ups - udp: validate checksum in udp_read_sock() (when sockmap is used) - sched: act_mirred: drop dst for the direction from egress to ingress - virtio_net_hdr_to_skb: count transport header in UFO, prevent allowing bad skbs into the stack - nfc: reorder the logic in nfc_{un,}register_device, fix unregister - ipsec: check return value of ipv6_skip_exthdr - usb: r8152: add MAC passthrough support for more Lenovo Docks" * tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits) ptp: ocp: Fix a couple NULL vs IS_ERR() checks net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock() net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound ipv6: check return value of ipv6_skip_exthdr e100: fix device suspend/resume devlink: Don't throw an error if flash notification sent before devlink visible page_pool: Revert "page_pool: disable dma mapping support..." ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() octeontx2-af: debugfs: don't corrupt user memory NFC: add NCI_UNREG flag to eliminate the race NFC: reorder the logic in nfc_{un,}register_device NFC: reorganize the functions in nci_request tipc: check for null after calling kmemdup i40e: Fix display error code in dmesg i40e: Fix creation of first queue by omitting it if is not power of two i40e: Fix warning message and call stack during rmmod i40e driver i40e: Fix ping is lost after configuring ADq on VF i40e: Fix changing previously set num_queue_pairs for PFs i40e: Fix NULL ptr dereference on VSI filter sync i40e: Fix correct max_pkt_size on VF RX queue ...
2021-11-18tracing/histogram: Fix UAF in destroy_hist_field()Kalesh Singh
Calling destroy_hist_field() on an expression will recursively free any operands associated with the expression. If during expression parsing the operands of the expression are already set when an error is encountered, there is no need to explicity free the operands. Doing so will result in destroy_hist_field() being called twice for the operands and lead to a use-after-free (UAF) error. If the operands are associated with the expression, only call destroy_hist_field() on the expression since the operands will be recursively freed. Link: https://lore.kernel.org/all/CAHk-=wgcrEbFgkw9720H3tW-AhHOoEKhYwZinYJw4FpzSaJ6_Q@mail.gmail.com/ Link: https://lkml.kernel.org/r/20211118011542.1420131-1-kaleshsingh@google.com Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Fixes: 8b5d46fd7a38 ("tracing/histogram: Optimize division by constants") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-11-18Merge tag 'printk-for-5.16-fixup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fixes from Petr Mladek: - Try to flush backtraces from other CPUs also on the local one. This was a regression caused by printk_safe buffers removal. - Remove header dependency warning. * tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: Remove printk.h inclusion in percpu.h printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces
2021-11-18Merge branch 'rework/printk_safe-removal' into for-linusPetr Mladek
2021-11-16Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf 2021-11-16 We've added 12 non-merge commits during the last 5 day(s) which contain a total of 23 files changed, 573 insertions(+), 73 deletions(-). The main changes are: 1) Fix pruning regression where verifier went overly conservative rejecting previsouly accepted programs, from Alexei Starovoitov and Lorenz Bauer. 2) Fix verifier TOCTOU bug when using read-only map's values as constant scalars during verification, from Daniel Borkmann. 3) Fix a crash due to a double free in XSK's buffer pool, from Magnus Karlsson. 4) Fix libbpf regression when cross-building runqslower, from Jean-Philippe Brucker. 5) Forbid use of bpf_ktime_get_coarse_ns() and bpf_timer_*() helpers in tracing programs due to deadlock possibilities, from Dmitrii Banshchikov. 6) Fix checksum validation in sockmap's udp_read_sock() callback, from Cong Wang. 7) Various BPF sample fixes such as XDP stats in xdp_sample_user, from Alexander Lobakin. 8) Fix libbpf gen_loader error handling wrt fd cleanup, from Kumar Kartikeya Dwivedi. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: udp: Validate checksum in udp_read_sock() bpf: Fix toctou on read-only map's constant scalar tracking samples/bpf: Fix build error due to -isystem removal selftests/bpf: Add tests for restricted helpers bpf: Forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs libbpf: Perform map fd cleanup for gen_loader in case of error samples/bpf: Fix incorrect use of strlen in xdp_redirect_cpu tools/runqslower: Fix cross-build samples/bpf: Fix summary per-sec stats in xdp_sample_user selftests/bpf: Check map in map pruning bpf: Fix inner map state pruning regression. xsk: Fix crash on double free in buffer pool ==================== Link: https://lore.kernel.org/r/20211116141134.6490-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-15bpf: Fix toctou on read-only map's constant scalar trackingDaniel Borkmann
Commit a23740ec43ba ("bpf: Track contents of read-only maps as scalars") is checking whether maps are read-only both from BPF program side and user space side, and then, given their content is constant, reading out their data via map->ops->map_direct_value_addr() which is then subsequently used as known scalar value for the register, that is, it is marked as __mark_reg_known() with the read value at verification time. Before a23740ec43ba, the register content was marked as an unknown scalar so the verifier could not make any assumptions about the map content. The current implementation however is prone to a TOCTOU race, meaning, the value read as known scalar for the register is not guaranteed to be exactly the same at a later point when the program is executed, and as such, the prior made assumptions of the verifier with regards to the program will be invalid which can cause issues such as OOB access, etc. While the BPF_F_RDONLY_PROG map flag is always fixed and required to be specified at map creation time, the map->frozen property is initially set to false for the map given the map value needs to be populated, e.g. for global data sections. Once complete, the loader "freezes" the map from user space such that no subsequent updates/deletes are possible anymore. For the rest of the lifetime of the map, this freeze one-time trigger cannot be undone anymore after a successful BPF_MAP_FREEZE cmd return. Meaning, any new BPF_* cmd calls which would update/delete map entries will be rejected with -EPERM since map_get_sys_perms() removes the FMODE_CAN_WRITE permission. This also means that pending update/delete map entries must still complete before this guarantee is given. This corner case is not an issue for loaders since they create and prepare such program private map in successive steps. However, a malicious user is able to trigger this TOCTOU race in two different ways: i) via userfaultfd, and ii) via batched updates. For i) userfaultfd is used to expand the competition interval, so that map_update_elem() can modify the contents of the map after map_freeze() and bpf_prog_load() were executed. This works, because userfaultfd halts the parallel thread which triggered a map_update_elem() at the time where we copy key/value from the user buffer and this already passed the FMODE_CAN_WRITE capability test given at that time the map was not "frozen". Then, the main thread performs the map_freeze() and bpf_prog_load(), and once that had completed successfully, the other thread is woken up to complete the pending map_update_elem() which then changes the map content. For ii) the idea of the batched update is similar, meaning, when there are a large number of updates to be processed, it can increase the competition interval between the two. It is therefore possible in practice to modify the contents of the map after executing map_freeze() and bpf_prog_load(). One way to fix both i) and ii) at the same time is to expand the use of the map's map->writecnt. The latter was introduced in fc9702273e2e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY") and further refined in 1f6cb19be2e2 ("bpf: Prevent re-mmap()'ing BPF map as writable for initially r/o mapping") with the rationale to make a writable mmap()'ing of a map mutually exclusive with read-only freezing. The counter indicates writable mmap() mappings and then prevents/fails the freeze operation. Its semantics can be expanded beyond just mmap() by generally indicating ongoing write phases. This would essentially span any parallel regular and batched flavor of update/delete operation and then also have map_freeze() fail with -EBUSY. For the check_mem_access() in the verifier we expand upon the bpf_map_is_rdonly() check ensuring that all last pending writes have completed via bpf_map_write_active() test. Once the map->frozen is set and bpf_map_write_active() indicates a map->writecnt of 0 only then we are really guaranteed to use the map's data as known constants. For map->frozen being set and pending writes in process of still being completed we fall back to marking that register as unknown scalar so we don't end up making assumptions about it. With this, both TOCTOU reproducers from i) and ii) are fixed. Note that the map->writecnt has been converted into a atomic64 in the fix in order to avoid a double freeze_mutex mutex_{un,}lock() pair when updating map->writecnt in the various map update/delete BPF_* cmd flavors. Spanning the freeze_mutex over entire map update/delete operations in syscall side would not be possible due to then causing everything to be serialized. Similarly, something like synchronize_rcu() after setting map->frozen to wait for update/deletes to complete is not possible either since it would also have to span the user copy which can sleep. On the libbpf side, this won't break d66562fba1ce ("libbpf: Add BPF object skeleton support") as the anonymous mmap()-ed "map initialization image" is remapped as a BPF map-backed mmap()-ed memory where for .rodata it's non-writable. Fixes: a23740ec43ba ("bpf: Track contents of read-only maps as scalars") Reported-by: w1tcher.bupt@gmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-11-15bpf: Forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progsDmitrii Banshchikov
Use of bpf_ktime_get_coarse_ns() and bpf_timer_* helpers in tracing progs may result in locking issues. bpf_ktime_get_coarse_ns() uses ktime_get_coarse_ns() time accessor that isn't safe for any context: ====================================================== WARNING: possible circular locking dependency detected 5.15.0-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.4/14877 is trying to acquire lock: ffffffff8cb30008 (tk_core.seq.seqcount){----}-{0:0}, at: ktime_get_coarse_ts64+0x25/0x110 kernel/time/timekeeping.c:2255 but task is already holding lock: ffffffff90dbf200 (&obj_hash[i].lock){-.-.}-{2:2}, at: debug_object_deactivate+0x61/0x400 lib/debugobjects.c:735 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&obj_hash[i].lock){-.-.}-{2:2}: lock_acquire+0x19f/0x4d0 kernel/locking/lockdep.c:5625 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd1/0x120 kernel/locking/spinlock.c:162 __debug_object_init+0xd9/0x1860 lib/debugobjects.c:569 debug_hrtimer_init kernel/time/hrtimer.c:414 [inline] debug_init kernel/time/hrtimer.c:468 [inline] hrtimer_init+0x20/0x40 kernel/time/hrtimer.c:1592 ntp_init_cmos_sync kernel/time/ntp.c:676 [inline] ntp_init+0xa1/0xad kernel/time/ntp.c:1095 timekeeping_init+0x512/0x6bf kernel/time/timekeeping.c:1639 start_kernel+0x267/0x56e init/main.c:1030 secondary_startup_64_no_verify+0xb1/0xbb -> #0 (tk_core.seq.seqcount){----}-{0:0}: check_prev_add kernel/locking/lockdep.c:3051 [inline] check_prevs_add kernel/locking/lockdep.c:3174 [inline] validate_chain+0x1dfb/0x8240 kernel/locking/lockdep.c:3789 __lock_acquire+0x1382/0x2b00 kernel/locking/lockdep.c:5015 lock_acquire+0x19f/0x4d0 kernel/locking/lockdep.c:5625 seqcount_lockdep_reader_access+0xfe/0x230 include/linux/seqlock.h:103 ktime_get_coarse_ts64+0x25/0x110 kernel/time/timekeeping.c:2255 ktime_get_coarse include/linux/timekeeping.h:120 [inline] ktime_get_coarse_ns include/linux/timekeeping.h:126 [inline] ____bpf_ktime_get_coarse_ns kernel/bpf/helpers.c:173 [inline] bpf_ktime_get_coarse_ns+0x7e/0x130 kernel/bpf/helpers.c:171 bpf_prog_a99735ebafdda2f1+0x10/0xb50 bpf_dispatcher_nop_func include/linux/bpf.h:721 [inline] __bpf_prog_run include/linux/filter.h:626 [inline] bpf_prog_run include/linux/filter.h:633 [inline] BPF_PROG_RUN_ARRAY include/linux/bpf.h:1294 [inline] trace_call_bpf+0x2cf/0x5d0 kernel/trace/bpf_trace.c:127 perf_trace_run_bpf_submit+0x7b/0x1d0 kernel/events/core.c:9708 perf_trace_lock+0x37c/0x440 include/trace/events/lock.h:39 trace_lock_release+0x128/0x150 include/trace/events/lock.h:58 lock_release+0x82/0x810 kernel/locking/lockdep.c:5636 __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:149 [inline] _raw_spin_unlock_irqrestore+0x75/0x130 kernel/locking/spinlock.c:194 debug_hrtimer_deactivate kernel/time/hrtimer.c:425 [inline] debug_deactivate kernel/time/hrtimer.c:481 [inline] __run_hrtimer kernel/time/hrtimer.c:1653 [inline] __hrtimer_run_queues+0x2f9/0xa60 kernel/time/hrtimer.c:1749 hrtimer_interrupt+0x3b3/0x1040 kernel/time/hrtimer.c:1811 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline] __sysvec_apic_timer_interrupt+0xf9/0x270 arch/x86/kernel/apic/apic.c:1103 sysvec_apic_timer_interrupt+0x8c/0xb0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:152 [inline] _raw_spin_unlock_irqrestore+0xd4/0x130 kernel/locking/spinlock.c:194 try_to_wake_up+0x702/0xd20 kernel/sched/core.c:4118 wake_up_process kernel/sched/core.c:4200 [inline] wake_up_q+0x9a/0xf0 kernel/sched/core.c:953 futex_wake+0x50f/0x5b0 kernel/futex/waitwake.c:184 do_futex+0x367/0x560 kernel/futex/syscalls.c:127 __do_sys_futex kernel/futex/syscalls.c:199 [inline] __se_sys_futex+0x401/0x4b0 kernel/futex/syscalls.c:180 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae There is a possible deadlock with bpf_timer_* set of helpers: hrtimer_start() lock_base(); trace_hrtimer...() perf_event() bpf_run() bpf_timer_start() hrtimer_start() lock_base() <- DEADLOCK Forbid use of bpf_ktime_get_coarse_ns() and bpf_timer_* helpers in BPF_PROG_TYPE_KPROBE, BPF_PROG_TYPE_TRACEPOINT, BPF_PROG_TYPE_PERF_EVENT and BPF_PROG_TYPE_RAW_TRACEPOINT prog types. Fixes: d05512618056 ("bpf: Add bpf_ktime_get_coarse_ns helper") Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.") Reported-by: syzbot+43fd005b5a1b4d10781e@syzkaller.appspotmail.com Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211113142227.566439-2-me@ubique.spb.ru
2021-11-14Merge tag 'trace-v5.16-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Update to tracing histogram variable string copy A fix to only copy the size of the field to the histogram string did not take into account that the size can be larger than the storage" * tag 'trace-v5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Add length protection to histogram string copies
2021-11-14tracing: Add length protection to histogram string copiesSteven Rostedt (VMware)
The string copies to the histogram storage has a max size of 256 bytes (defined by MAX_FILTER_STR_VAL). Only the string size of the event field needs to be copied to the event storage, but no more than what is in the event storage. Although nothing should be bigger than 256 bytes, there's no protection against overwriting of the storage if one day there is. Copy no more than the destination size, and enforce it. Also had to turn MAX_FILTER_STR_VAL into an unsigned int, to keep the min() comparison of the string sizes of comparable types. Link: https://lore.kernel.org/all/CAHk-=wjREUihCGrtRBwfX47y_KrLCGjiq3t6QtoNJpmVrAEb1w@mail.gmail.com/ Link: https://lkml.kernel.org/r/20211114132834.183429a4@rorschach.local.home Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tom Zanussi <zanussi@kernel.org> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Fixes: 63f84ae6b82b ("tracing/histogram: Do not copy the fixed-size char array field over the field size") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-11-14Merge tag 'timers-urgent-2021-11-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix for POSIX CPU timers to address a problem where POSIX CPU timer delivery stops working for a new child task because copy_process() copies state information which is only valid for the parent task" * tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()
2021-11-14Merge tag 'irq-urgent-2021-11-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem Core code: - A regression fix for the Open Firmware interrupt mapping code where a interrupt controller property in a node caused a map property in the same node to be ignored. Interrupt chip drivers: - Workaround a limitation in SiFive PLIC interrupt chip which silently ignores an EOI when the interrupt line is masked. - Provide the missing mask/unmask implementation for the CSKY MP interrupt controller. PCI/MSI: - Prevent a use after free when PCI/MSI interrupts are released by destroying the sysfs entries before freeing the memory which is accessed in the sysfs show() function. - Implement a mask quirk for the Nvidia ION AHCI chip which does not advertise masking capability despite implementing it. Even worse the chip comes out of reset with all MSI entries masked, which due to the missing masking capability never get unmasked. - Move the check which prevents accessing the MSI[X] masking for XEN back into the low level accessors. The recent consolidation missed that these accessors can be invoked from places which do not have that check which broke XEN. Move them back to he original place instead of sprinkling tons of these checks all over the code" * tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: of/irq: Don't ignore interrupt-controller when interrupt-map failed irqchip/sifive-plic: Fixup EOI failed when masked irqchip/csky-mpintc: Fixup mask/unmask implementation PCI/MSI: Destroy sysfs before freeing entries PCI: Add MSI masking quirk for Nvidia ION AHCI PCI/MSI: Deal with devices lying about their MSI mask capability PCI/MSI: Move non-mask check back into low level accessors
2021-11-14Merge tag 'sched_urgent_for_v5.16_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Avoid touching ~100 config files in order to be able to select the preemption model - clear cluster CPU masks too, on the CPU unplug path - prevent use-after-free in cfs - Prevent a race condition when updating CPU cache domains - Factor out common shared part of smp_prepare_cpus() into a common helper which can be called by both baremetal and Xen, in order to fix a booting of Xen PV guests * tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: preempt: Restore preemption model selection configs arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology() sched/fair: Prevent dead task groups from regaining cfs_rq's sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain() x86/smp: Factor out parts of native_smp_prepare_cpus()
2021-11-14Merge tag 'perf_urgent_for_v5.16_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Prevent unintentional page sharing by checking whether a page reference to a PMU samples page has been acquired properly before that - Make sure the LBR_SELECT MSR is saved/restored too - Reset the LBR_SELECT MSR when resetting the LBR PMU to clear any residual data left * tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Avoid put_page() when GUP fails perf/x86/vlbr: Add c->flags to vlbr event constraints perf/x86/lbr: Reset LBR_SELECT during vlbr reset
2021-11-13Merge tag 'trace-v5.16-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Three tracing fixes: - Make local osnoise_instances static - Copy just actual size of histogram strings - Properly check missing operands in histogram expressions" * tag 'trace-v5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/histogram: Fix check for missing operands in an expression tracing/histogram: Do not copy the fixed-size char array field over the field size tracing/osnoise: Make osnoise_instances static
2021-11-12tracing/histogram: Fix check for missing operands in an expressionKalesh Singh
If a binary operation is detected while parsing an expression string, the operand strings are deduced by splitting the experssion string at the position of the detected binary operator. Both operand strings are sub-strings (can be empty string) of the expression string but will never be NULL. Currently a NULL check is used for missing operands, fix this by checking for empty strings instead. Link: https://lkml.kernel.org/r/20211112191324.1302505-1-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Fixes: 9710b2f341a0 ("tracing: Fix operator precedence for hist triggers expression") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-11-12tracing/histogram: Do not copy the fixed-size char array field over the ↵Masami Hiramatsu
field size Do not copy the fixed-size char array field of the events over the field size. The histogram treats char array as a string and there are 2 types of char array in the event, fixed-size and dynamic string. The dynamic string (__data_loc) field must be null terminated, but the fixed-size char array field may not be null terminated (not a string, but just a data). In that case, histogram can copy the data after the field. This uses the original field size for fixed-size char array field to restrict the histogram not to access over the original field size. Link: https://lkml.kernel.org/r/163673292822.195747.3696966210526410250.stgit@devnote2 Fixes: 02205a6752f2 (tracing: Add support for 'field variables') Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-11-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just one new driver (Cypress StreetFighter touchkey), and no input core changes this time. Plus various fixes and enhancements to existing drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits) Input: iforce - fix control-message timeout Input: wacom_i2c - use macros for the bit masks Input: ili210x - reduce sample period to 15ms Input: ili210x - improve polled sample spacing Input: ili210x - special case ili251x sample read out Input: elantench - fix misreporting trackpoint coordinates Input: synaptics-rmi4 - Fix device hierarchy Input: i8042 - Add quirk for Fujitsu Lifebook T725 Input: cap11xx - add support for cap1206 Input: remove unused header <linux/input/cy8ctmg110_pdata.h> Input: ili210x - add ili251x firmware update support Input: ili210x - export ili251x version details via sysfs Input: ili210x - use resolution from ili251x firmware Input: pm8941-pwrkey - respect reboot_mode for warm reset reboot: export symbol 'reboot_mode' Input: max77693-haptic - drop unneeded MODULE_ALIAS Input: cpcap-pwrbutton - do not set input parent explicitly Input: max8925_onkey - don't mark comment as kernel-doc Input: ads7846 - do not attempt IRQ workaround when deferring probe Input: ads7846 - use input_set_capability() ...
2021-11-12bpf: Fix inner map state pruning regression.Alexei Starovoitov
Introduction of map_uid made two lookups from outer map to be distinct. That distinction is only necessary when inner map has an embedded timer. Otherwise it will make the verifier state pruning to be conservative which will cause complex programs to hit 1M insn_processed limit. Tighten map_uid logic to apply to inner maps with timers only. Fixes: 3e8ce29850f1 ("bpf: Prevent pointer mismatch in bpf_timer_init.") Reported-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/CACAyw99hVEJFoiBH_ZGyy=+oO-jyydoz6v1DeKPKs2HVsUH28w@mail.gmail.com Link: https://lore.kernel.org/bpf/20211110172556.20754-1-alexei.starovoitov@gmail.com
2021-11-12tracing/osnoise: Make osnoise_instances staticDaniel Bristot de Oliveira
Make the struct list_head osnoise_instances definition static. Link: https://lore.kernel.org/all/202111120052.ZuikQSJi-lkp@intel.com/ Link: https://lkml.kernel.org/r/d001f0eeac66e2b2eeec7d2a15e9e7abede0453a.1636667971.git.bristot@kernel.org Cc: Ingo Molnar <mingo@redhat.com> Fixes: dae181349f1e ("tracing/osnoise: Support a list of trace_array *tr") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>